Search Results

Search found 48308 results on 1933 pages for 'embedded system'.

Page 548/1933 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• My Boot order changed. Why?

  - by Chris

  I have a laptop running Windows XP SP3 with one internal hard drive partitioned into C: (system), D: (storage) and I have an external hard drive, F: (external drive). Yesterday the machine was running fine. Today, I go back to it and see that it's just showing a blinking cursor. Checked through the BIOS and the hard drive checked out fine. CTRL-ALT-DELETED the machine a few times, but I was never able to boot back into the operating system. I threw in a live CD and found out that the boot order of the drives has changed. The external drive is now C:, the system partiton is D:, and the storage partition is E:. Does anyone have any idea of how or why this would have occured? Auto system updates are turned off so there should have been no automatic reboot of the system overnight, and anti-virius runs on the machine and has found no infections before this occured. Edit When I was looking through the BIOS of the machine, I did see that the boot order was changed. But still the same question remains, what would have caused this to happen? I can't believe that a random reboot happened and totally changed my hard drive setup.

  Read the article

• Not able to run firefox in a head-less Ubuntu server 9.10

  - by Julio J.

  I need to run Firefox in my server in order to execute some Selenium tests from Hudson. I would love no to have to install a complete gui. So I installed Xvfb in order to fake the Gui (I understand it this way correct me if my assumptions are wrong). After some time trying to make it work, I'm stuck with the next situation: $ sudo Xvfb -ac :99 & [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) $ firefox [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! [config/dbus] couldn't register object path (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) Xlib: extension "RANDR" missing on display ":99.0". GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally without any error message) I'm runnig firefox without installing it from the repositories. And I'm getting a socket timeout when I try to run the selenium tests, so I guess the problem is in Firefox and Xvfb. I have installed already the nex package: i gconf-defaults-service - GNOME configuration database system (system defaults service) That in some forums suggest to be a fix, that in my case doesn't work. Any explanation about the problem and ways of solving it without installing a full gui, will be very helpful.

  Read the article

• How to install IE9 when KB2120976 is not applicable to my Windows 7 x86 Ultimate edition?

  - by CVertex

  I'm trying to install IE9, visit http://beautyoftheweb.com, download it and then says it's downloading prereqs. After a minute, the installer says there's a problem and directs me to Prerequisites for installing Internet Explorer 9 Beta I click on the x86 installers one by one... most say "already installed".. But http://support.microsoft.com/kb/2120976/ says "The update is not applicable to your computer". Lame. So I try the IE9 install and the go through the whole process again with the same result. I discovered there's an IE9 install log at C:\Windows\IE9_main.log which logs the install process and reports an Error for 2120976 00:06.630: ERROR: Error installing prerequisite file (C:\Users\Vijay\AppData\Local\Temp\IE98036.tmp\KB2120976_x86.msu): 0x80240017 (2149842967) 00:06.677: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates. 00:12.090: INFO: Link clicked, opening URL in new window:'http://go.microsoft.com/fwlink/?LinkId=185111' 00:12.106: INFO: Setup exit code: 0x00009C47 (40007) - Required updates are missing from the system.are missing from the system. Any idea why KB2120976 is inapplicable to my LEGAL Windows 7 Ultimate system? Any help is greatly appreciated.

  Read the article

• NetInstall working on some systems, not working on others

  - by cduruk

  Hi, I'm having an issue where my NetInstall setup works on some computers and fails on others. I am not able to diagnose the issue. I created an image of a Mac Mini and then created a NetRestore image using the System Image Utility found on Snow Leopard Server. NetBoot and NFS all seem to be working fine on the server, which is an XServe. Then I select the NetInstall image from the Startup Disk on a machine. On some of the machines, the process works as expected. On some of them, I see the globe icon blink a few times and then the system boots to the regular hard drive. I have captured the tracedump and the system.log logs from the server on both cases where NetInstall seems to work and fail. Here is the link that has all the logs http://gist.github.com/232232 The gist of the failure seems to be from the lack of BSDP DISCOVER in the failure but I'm not able to identify why that exactly is happening. I'd really appreciate any help on this issue.

  Read the article

• Disc drive busy on MacBook, with disc stuck inside.

  - by ayaz

  I have a white MacBook, running Snow Leopard, 10.6.3 with the latest updates. I popped in a DVD that the system failed to mount. I did not see any conspicuous errors. As a result of this failure, the DVD got stuck in the drive. Neither pressing the eject button on the keyboard nor running the diskutil eject command caused the DVD to come out. The commands drutil eject and drutil tray open could not get the DVD to budge at all. The 'mount' and 'eject' buttons on the window for Disk Utility are dimmed out, while it is written in the middle for the DVD drive that that particular disc drive is busy. This is not the first time this has happened with me. I know that I will ultimately have to resort to rebooting the system and holding down the eject button to get the DVD to come out. But, is there any workaround that does not involve rebooting the system and prying the disc out? The drive on this MacBook does not have a needle-pin reset button -- at least, I couldn't find it anywhere. Any help will be greatly appreciated. Many thanks.

  Read the article

• Tripwire help Required

  - by ramaperumal

  I have created the policy file in Tripwire and also I have created the rules as well mentioned below: /opt/jboss/server/gis/conf -> $(SEC_CONFIG) +aipm +c+g+a+i+s+t+u+l+M; /usr/local/gtech/eseries/ -> $(SEC_CONFIG) +a+c+g+i+s+t+u+l+M ; After running the integrity check the output should be a(Access timestamp),c (Inode timestamp (create/modify),g (File owner's group ID),i (Inode number),s (File size),t (time stamp),u (File owner's user ID),l(File is increasing in size (a "growing file"),M (MD5 hash value). I am getting the output as below: [root@xxsi1242 tripwire]# tripwire --check Parsing policy file: /etc/tripwire/tw.pol *** Processing Unix File System *** Performing integrity check... Wrote report file: /var/lib/tripwire/report/xxsi1242.gtk.gtech.com-20131106-053812.twr Open Source Tripwire(R) 2.4.1 Integrity Check Report Report generated by: root Report created on: Wed 06 Nov 2013 05:38:12 AM EST Database last updated on: Wed 06 Nov 2013 05:31:17 AM EST =============================================================================== Report Summary: =============================================================================== Host name: xxsi1242.gtk.gtech.com Host IP address: 156.24.65.171 Host ID: None Policy file used: /etc/tripwire/tw.pol Configuration file used: /etc/tripwire/tw.cfg Database file used: /var/lib/tripwire/xxsi1242.gtk.gtech.com.twd Command line used: tripwire --check =============================================================================== Rule Summary: =============================================================================== ------------------------------------------------------------------------------- Section: Unix File System ------------------------------------------------------------------------------- Rule Name Severity Level Added Removed Modified --------- -------------- ----- ------- -------- Invariant Directories 66 0 0 0 Temporary directories 33 0 0 0 * Tripwire Data Files 100 0 0 1 Tech Stack 100 0 0 0 User binaries 66 0 0 0 Tripwire Binaries 100 0 0 0 * CLPS bins 100 0 0 2 CLPS Configuration files 100 0 0 0 ESCommon 100 0 0 0 Shell Binaries 100 0 0 0 OS executables and libraries 100 0 0 0 Security Control 100 0 0 0 ESCommon Configuration 100 0 0 0 (/etc/gtech/escommon) Total objects scanned: 12358 Total violations found: 3 =============================================================================== Object Summary: =============================================================================== ------------------------------------------------------------------------------- # Section: Unix File System ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Rule Name: Tripwire Data Files (/etc/tripwire/tw.pol) Severity Level: 100 ------------------------------------------------------------------------------- Modified: "/etc/tripwire/tw.pol" ------------------------------------------------------------------------------- Rule Name: CLPS bins (/opt/jboss/server) Severity Level: 100 ------------------------------------------------------------------------------- Modified: "/opt/jboss/server/esapps1/data/hypersonic/localDB.lck" "/opt/jboss/server/gis/data/hypersonic/localDB.lck" =============================================================================== Error Report: =============================================================================== No Errors ------------------------------------------------------------------------------- *** End of report *** Note: In the output I only am getting the files which are modified. I need the detail output for this. But unfortunately I am not getting what I expected. Please help me to proced further.

  Read the article

• How can I make Internet Explorer 6 render Web pages like Internet Explorer 11?

  - by gparyani

  Now, I know that this may seem like a bad question in that I can just upgrade to Internet Explorer 8, but I am sticking with IE6 in that IE8 removes valuable features, like the ability to save favorites offline and the fact that a file path turns into a Windows Explorer window and typing a Web address into Windows Explorer changes it into an IE window. I know that Internet Explorer 6 does a really bad job at rendering some pages. I know of the Google Chrome Frame extension that brings Chrome-style rendering into IE, but that will soon be discontinued. So, I tried another thing: I know that C:\Windows\System32\mshtml.dll contains the Trident rendering engine that is used by IE, so I tried something: I first backed up the original file by renaming it on Windows XP to mshtml-old.dll, then I tried to copy in the DLL from a computer running Windows 7 with Internet Explorer 10. I noticed that, after copying, the system had replaced the new DLL with the old one, but left the one I backed up intact. Is there any way I can get the system to not replace the DLL like that so that I can transfer in IE11's mshtml.dll into Windows XP and make IE6 render like IE11? I'm looking for an answer that describes how to tweak my system to make IE6 render like IE11 (or IE10), not one that tells me to upgrade IE or install another browser. I don't care how tedious the method is, just as long as it works.

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• android geting data from sql

  - by sagar

  Hello i m new to android. i wont to connect to sql server for store and get data so so me one can help me sending code of android for do it.. i had tried to do tht with java nd it was workink but now i wont to create a aplication for android my java code is :: import java.sql.*; public class MysqlTest { public static void main (String[] args) { Connection conn = null; try { String userName = "pietro"; //change it to your username String password = "pietro"; //change it to your password String url = "jdbc:mysql://192.168.0.67:3306/registro"; Class.forName("com.mysql.jdbc.Driver").newInstance(); conn = DriverManager.getConnection(url, userName, password); Statement s = (Statement) conn.createStatement(); // code for create a tabel in server s.execute("create table School2 (rolno integer,sub text)"); // code for create a tabel in server s.execute("insert into School2(rolno,sub)values(10,'java')"); //code for add value in tabel s.execute("select rolno,sub from School2");//code for add value in tabel s.close(); System.out.println("Database connection established"); } catch (Exception e) { System.err.println("Cannot connect to database server"); } finally { if (conn != null) { try { conn.close (); System.out.println("Database connection terminated"); } catch (Exception e) { /* ignore close errors */ } } } } }

  Read the article

• Registry remotley hacked win 7 need help tracking the perp

  - by user577229

  I was writing some .VBS code at thhe office that would allow certain file extensions to be downloaded without a warning dialog on a w7x32 system. The system I was writing this on is in a lab on a segmented subnet. All web access is via a proxy server. The only means of accessing my machine is via the internet or from within the labs MSFT AD domain. While writing and testing my code I found a message of sorts. Upon refresing the registry to verify my code changed a dword, instead the message HELLO was written and visible in regedit where the dword value wass called for. I took a screen shot and proceeded to edit my code. This same weird behavior occurred last time I was writing registry code except on another internal server. I understand that remote registry access exists for windows systems. I will block this immediately once I return to the office. What I want to know is, can I trace who made this connection? How would I do this? I suspect the cause of this is the cause of other "odd" behaviors I'm experiencing at work such as losing control of my input director master control for over an hour and unchanged code that all of a sudden fails for no logical region. These failures occur at funny times, whenver I'm about to give a demonstration of my test code. I know this sounds crazy however knowledge of the registry component makes this believable. Once the registry can be accessed, the entire system is compromised. Any help or sanity checking is appreciated.

  Read the article

• Managing disk in a VM

  - by dst

  I'm replacing my two old rack servers with a new one that has plenty of power to take over the functionality my current servers. The server is a 4U rack mount with 16 3.5" SAS drive bays, two 2.5" bays, a Xeon E3-1230v2 CPU and 32GB of ECC RAM. My issue is the following. I would like to have a FreeBSD file server with ZFS managing disks. However, I need other VMs for e.g. a shell/git server, mail server etc. I'm wondering how to deal with the following issues: I want ZFS to fully manage the disks, so I'm not using any hardware RAID. Should I pass the SAS controller directly to the FreeBSD system as passthrough PCI? I want to maximize the reliability of the setup. On what disks should I install the hypervsor and keep server system disks? For (2) I have the option of having a RAID setup on the SAS controller and using that as system disk to store the hypervisor as well as VM images. However, this makes PCI passthrough to the file server impossible. Another option is using the two 2.5" bays. In terms of reliability how are SSDs compared to e.g. WD RE4 disks? Would it make sense to have two SSDs in software RAID as boot disks for the hypervisor or should I just go with e.g. WD RE4 disks in a software RAID setup. I also need to think about where to store the mails for the mail server, but this could be done over NFS between the VMs. BTW, this is for home use, so the load is not really that big. What I'm looking for is best practices for splitting up a server.

  Read the article

• How to extend a Linux PV partition online after virtual disk growth

  - by Yves Martin

  VMware allows to extend the size of a virtual disk online - when the VM is running. The next expected steps for Linux system are: extend the partition: delete and create a larger one with fdisk extend the PV size with pvresize use free extents for lvresize operations and then resize2fs for file system But I am stuck on the first step: fdisk and sfdisk still display the old size for the disk. My disk is a SCSI virtual disk connected thanks to the virtual LSI Logic controller. How to refresh the virtual disk size and partition table information available in Linux kernel without reboot ? As far as I know all that steps are possible for a running Windows, without reboot and even without any user actions thanks to VMWare tools. On Linux, I expects to do all steps online too and I already know steps 2, 3 and 4 work online. But the first one - change partition size declared in the partition table (still) seems to require a reboot. Update: My system is a Debian Lenny with kernel 2.6.26 and the disk I have extended is the main disk with a large PV containing the "root" LV for "/".

  Read the article

• Cannot load from raid with grub

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... This is my partial fdisk -l output: Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Anybody can resolve this issue? I have big headache with this.

  Read the article

• Kickstart: Serve dynamic kickstart images via a CGI or PHP script?

  - by Stefan Lasiewski

  I'd like to kickstart a couple dozen RHEL6/SL6 servers. However, some of these servers are different and I don't want to create a new ks.cfg file for each class of server. Are there any products which can generate a Kickstart file dynamically on the fly, from a template? For example, if I append a line like this to the KERNEL: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi Then the script ks.cgi can determine what host this is (Via the MAC address), and print out Kickstart options which are appropriate for that host. I could optionally override some options by passing parameters to the script, like this: APPEND ks=http://192.168.1.100/cgi-bin/ks.cgi?NODETYPE=production&IP=192.168.2.80 After we kickstart the server, we activate Cfengine/Puppet on this system and manage the system using our favorite Configuration Management product. We're experimenting with xCAT but it is proving too cumbersome. I've looked into Cobbler, but I'm not sure it does this. Update: A roll-your-own solution is discussed in the O'Reilly book: Managing RPM-Based Systems with Kickstart and Yum, Chapter 3. Customizing Your Kickstart Install Dynamic ks.cfg, which echos some of the comments in this thread: To implement such a tool is beyond the scope of this Short Cut, but I can walk through the high-level design. Any such solution would mix a data store (the things that change) with a templating solution (the things that don’t change). The data store would hold the per-machine data, such as the IP address and hostname. You would also need a unique identifier, perhaps the hostname, such that you could pick up a given machine’s data. The data store could be a flat file, XML data, or a relational database such as PostgreSQL or MySQL. In turn, to invoke the system, you pass a machine’s unique identifier as a URL parameter. For example: boot: linux ks=http://your.kickstart.server/gen_config?host-server25 In this example, the CGI (or servlet, or whatever) generates a ks.cfg for the machine server25. But where, oh where, is the code for ks.cgi?

  Read the article

• get-eventlog issue

  - by Jim B

  I wanted to get a quick report of some log entries I saw on a server, so I ran: Get-Eventlog -logname system -newest 10 -computer fs1 | fl I got events back however the descriptions were all wrong. Here's an example: Index : 1260055 EntryType : Warning InstanceId : 2186936367 Message : The description for Event ID '-2108030929' in Source 'W32Time' cannot be found. The local compute r may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'time. windows.com,0x1' Category : (0) CategoryNumber : 0 ReplacementStrings : {time.windows.com,0x1} Source : W32Time TimeGenerated : 1/25/2010 10:43:31 AM TimeWritten : 1/25/2010 10:43:31 AM UserName : Note that if I pull the event ID property it's correct (in this case 38) Is this is known issue or is something wrong. The messages resolve fine via event viewer locally and remotely Here is the powershell version info: Name : ConsoleHost Version : 2.0 InstanceId : bc58fcf8-bba3-4ca8-8972-17dbd5d9ff08 UI : System.Management.Automation.Internal.Host.InternalHostUserInterface CurrentCulture : en-US CurrentUICulture : en-US PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy IsRunspacePushed : False Runspace : System.Management.Automation.Runspaces.LocalRunspace Here is the revised version info: Name Value ---- ----- CLRVersion 2.0.50727.3603 BuildVersion 6.0.6002.18111 PSVersion 2.0 WSManStackVersion 2.0 PSCompatibleVersions {1.0, 2.0} SerializationVersion 1.1.0.1 PSRemotingProtocolVersion 2.1

  Read the article

• How to Re-install an App that Shows up in the Appstore as 'Update' Instead of 'Buy App'

  - by Craig Reville

  So long story short: I dropped the wrong app into 'clean my mac' and I hit 'cancel' but it was too late by that point. I rebooted and appstore said it had an update, when I opened appstore it was showing an update for the app I just uninstalled. I tried clicking 'update' but it gives me an error saying it's unable to install after 'downloading'. When I try to go into 'purchased apps' it shows the app as uninstalled so I click 'install' and I get an error saying it's already installed. I'm running Lion OS X, latest version, updated, mac book pro is only a few months old. I tried searching through the entire system to remove all traces of the app, after rebooting appstore no longer shows the app and no longer shows the update but on the apps page it still says 'Update'. I tried reinstalling the app from desktop OUT of the appstore and again says the app is 'already installed'. So after reading more about lion I found an article that spoke about 'BundleID' being the thing that tells appstore what's installed and needing updating however I can't find the location of where the BundleID would be. Any thoughts? I've tried CCleaner, AppCleaner etc and none of them show the app, mainly because it is uninstalled. Update I've spoken to Apple Support who confirmed that there is a file in the system that connects separately to tell the system if there are updates available however they declined to inform me of any further details. Apple also referred me from technical support to iTunes App Store opposed to Mac App Store support and from there I have been referred to AppleCare who are currently 'investigating' this issue. Hopefully there will be a fix that's simple to implement for people having similar issues, this appears to be a more common issue than I previously thought.

  Read the article

• Automate creation of Windows startup script?

  - by Niten

  Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, COM, or otherwise (even Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

  Read the article

• Windows 7 fails to connect to the internet a few minutes after startup

  - by SageTheGreat

  Problem Earlier today, when I turned on my desktop computer, my internet connection works fine. Cryptocurrency miners connecting and hashing as usual and I can browse websites. But after a few minutes, my miner fails indicating that there is something wrong with my internet connection. Tried refreshing my browser and is stuck at "resolving host", and then presented me an error. After that, i can't browse sites anymore. But the weird thing is that the network icon in Windows 7 shows no signs of problems. Solutions Made Restarted my computer without doing anything: Problem persists. Tried using the network troubleshooter of windows: Reported no problems Stopped bonjour still no progress. Loaded windows using Last good config: still no progress. Restarted Modem: No change. Current Status I currently did a system restore to my system to a point before installing the latest update from Microsoft. Because earlier today, I installed some updates and after that, the problem started to appear. (After system restore, same problem.) Latest Programs installed before the problem MS Visual Studio 2013 (but internet still worked fine after the install). I hope someone could provide answers on this problem. It is my first time encountering this. EDIT: Additional Info OS: Windows 7 SP1 64-bit AV: Avast Free Antivirus Internet Connection Type: Ethernet It appears that my Laptop can't even connect to the machine thru Remote Desktop My laptop and phone on WiFi works fine and can connect to the internet. EDIT 2: Whenever I boot into Safe Mode, my Internet is fine.

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Rename Active Directory domain following Windows 2000 -> 2008 migration.

  - by ewwhite

  I'm working with a site that needs an internal DNS domain rename. It currently has a DNS name of domain.abc.com and NT name of ABC. I'm trying to get to a DNS name of abctrading.com and NT name of ABCTRADING. Split DNS would be used. The site originally ran from a single Windows 2000 domain controller hosting AD, file, print, DHCP and DNS services. There was no Exchange system in the environment. The 50 client PCs are all Windows XP with a handful of users using roaming profiles. All users are in a single OU and there are no group policy/GPOs. I'm a Linux engineer, but have been trying to guide another group of consultants to reach a more suitable setup. With the help of this group, we were able to move the single Windows 2000 system to a set of Windows 2008 R2 servers separated into domain controller and file/print systems (virtualized). We are also trying to add an Exchange 2010 system to this mix. The Windows 2000 server was demoted and is no longer in the picture. This is the tricky part, as client wants the domain renamed and the consultants aren't quite sure how to get through it without another 32-40 hours of testing/implementation. THey say that there's considerable risk to do the rename without a completely isolated test environment. However, this rename has to be done before installing Exchange. So we're stuck at this point. I'd like to know what's involved in renaming the domain at this point. We're on Windows Server 2008. The AD is healthy now. Coming from a Linux background, it seems as though there should be a reasonable path to this. Also, since the original domain appears to be a child/subdomain, would that be a problem here. I'd appreciate any guidance.

  Read the article

• Eclipse on Ubuntu: Rectangles instead of Strings and some Java methods and classes

  - by Claus Hausberger

  after upgrading from Ubuntu 9.04. to 11.04 (new installation), I have weird problems with the Eclipse editor. With the Eclipse PyDev plugin, whenever I typ single quoted strings like 'bla', they appear as rectangles (both the quotes as well as the string). First I thought this was a problem with the PyDev plugin, but it also happens with Java and Scala Plugins. With Java, it happens, for example, when typing System.out.println("bla") and then "out" is shown as rectangles only. Weird is that for about half a second I see "System.out.println" and then the editor changes it to System.[][][].println (not really [] (here I used two brackets), it is shown as rectangles). This is very weird. I've never had this before with any Ubuntu, Java or Eclipse version. Currently, I use: Ubuntu 11.04. Eclipse 3.6 Java 1.6.0_25 The latest plugins for Python (2.1) and Scala (beta 5) where used. Eclipse and Ubuntu Terminal is set to UTF-8. The problem also happens when using KDE instead of Gnome. I doubt is has anything to do with Java as I use the same versions on older Ubuntu installations (10.04, 9.10, etc) at work. It does not happen with Netbeans. But I saw once error dialog message from the Update Manager where there were some rectangles in the error widget. Maybe this is the same problem Any ideas what could be wrong here and how to fix this? Eclipse is unusable but I need this for work and also for Scala and Python (the Eclipse plugins for those are very good now). Claus

  Read the article

• How do I stop VLC from stealing my volume buttons

  - by MGOwen

  when I press the volume buttons on my laptop, usually the system volume is changed. However, when I do this with VLC it "steals" the presses and adjusts it's own "volume" instead. The system volume is also changed. I can't find any way to turn this off in VLC. Does anyone know? Update: Sorry, some more details I should have included originally: VLC VERSION: 1.1.4 (and a few previous releases, back to about 1.1.0 or so, I think) OS: Win Vista Pro 32 HARDWARE: Dell 1720 laptop (the volume buttons are little buttons on the front of the unit, they may work something like "media" keyboard volume buttons) Update: The buttons seem to map to Ctrl+Alt+b and Ctrl+Alt+c (according to the shortcut key box in windows shortcut properties) but the VLC advanced preferences hotkeys screen doesn't list these as the keys it uses for volume. I changed it so there are no volume hotkeys in VLC settings - no luck it still steals the presses and adjusts the volume. Also, pressing Ctrl+Alt+b or c doesn't change my system volume, so who knows what windows or VLC are doing to recognise those volume buttons. :(

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• How to make emacs accept UTF-8 from the keyboard

  - by Brent.Longborough

  My friends have persuaded me to "try again" (about the 5th time in about 12 years) with emacs. I'm currently suffering a little, and need help with emacs + utf-8. I'm running the 23.3.1 emacs gui on Windows 7 with my own custom keyboard layout (built with MS Keyboard Layout Creator). The layout has a full ISO-8859-1 (Latin-1) character set, plus some additional characters from ISO-8859-9 (Latin-5, gis etc for Turkish) and w for Welsh (don't know where that one lives). In my .emacs, I have (blindly) added these lines: ;; key board / input method settings (setq locale-coding-system 'utf-8) (set-terminal-coding-system 'utf-8) (set-keyboard-coding-system 'utf-8) (set-language-environment 'UTF-8) ; prefer utf-8 for language settings Now, when I enter characters from ISO Latin-1 from the keyboard, they are accepted without problems, but characters from outside Latin-1 are "translated" to an approximate character in Latin-1. Thus, for example, Latin-5 "g" gets converted to a plain "g". Cutting and pasting, however, work fine. Can anyone tell me what I'm doing wrong? I should like to make everything I do with emacs utf-8 with BOM.

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >