Search Results

Search found 17782 results on 712 pages for 'questions and answers'.

Page 548/712 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• Intel Rapid Storage Technology (pre-OS) driver installation

  - by Nero theZero

  My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

  Read the article

• ssh timeout issue connecting to an EC2 instance on OS X

  - by mamusr

  I am new to AWS and not a networking expert but curious to know more about it. I created a VPC with a public subnet only. Then i created an EC2 instance using an Ubuntu 14.04 64-bit pv AMI image (ami-e84d8480) as well generating the key pair needed to connect to it through ssh. I followed amazon's instructions to connect to an EC2 instance via ssh which did not work. Here is my attempted input and debug log: Running on OS X 10.9.4 user$ ssh -vvv -i key.pem [email protected] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 102: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: connect to address xxx.xxx.xxx.xxx port 22: Operation timed out ssh: connect to host xxx.xxx.xxx.xxx port 22: Operation timed out To attempt to resolve the issue: I enabled the SSH port. Tried different usernames other than ubuntu, like ec2-user and root. Initially set an inbound ssh rule in the security group to connect to only my ip address. When that did not work, i changed it to allow any ip to connect. But those actions did not fix the problem. Here are my guesses as to what i am missing in getting the EC2 instance connection to work. My etc/ssh_config file may be preventing the connection from taking place. I may have missed an important networking detail when setting up the VPC. I do not have a public ip address specified for the instance. I am connecting through the private ip address. My questions for the community: Am i going about it the wrong way connecting to the instance through the private ip address? if so, do i need to specify a public ip address for it to connect or some other method?

  Read the article

• Redundant Microsoft server solution for small company

  - by MadBoy

  I'm planning to change one server Microsoft SBS 2003 with SharePoint, Exchange and SQL database into something that will provide me with some redundancy and won't be single point of failure. I was thinking to buy 2x exactly the same physical servers and put 2 virtualized servers on HyperV or VMWare on each. Then i would put SharePoint, Exchange and SQL on that 1 physical server (shared onto 2x VM's). I would like 2nd physical server to be exact duplicate of the first one so that when 1st server goes down (for reboot or hw failure), 2nd takes care of everything so that users don't even see anything changed (in terms all their emails, sharepoint stuff is available). My questions are: Will I have to pay for licenses for both servers even thou only one instance of SharePoint, Exchange, SQL will be used at same time? What are proposed solutions to do that? Any additional hardware I would need, any complicated software configuration to be expected to configure such redundancy so that when one physical server goes down 2nd one is taking care of rest? What problems should I expect? This solution is for 60 people. Later on it may or may expand.

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• Laptop recommendation - Portable Gaming

  - by ivan

  So, I'm looking for a new laptop (http://superuser.com/questions/116869/toshiba-satellite-u500-totally-damaged-lcd). My requirements for a new Laptop are: -good keyboard(illuminated) and touchpad (multi-media keys included, should be better than toshiba u500) -good graphics card, with system rating of 6.3 and up for gaming graphics (my Toshiba U500 has 6.3). I used to run some heavy games on my Toshiba U500 with ATI Mobility Radeon 4570 with 512 mb VRAM but the framerates are not that nice on high settings. -Decent CPU but I think all new Core i3, i5, i7 can run most of recent resource intensive games (My Toshiba U500 has a Core 2 Duo T6500, 2.13 Ghz) I'm also looking for a long-term reliability, good sound quality, lots of fast RAM of-course(4GB DDR3 - 1066Mhz and up) and a clear looking LED screen with a decent resolution. (I can accomodate a laptop with screen size of 13-inch upto 15.6 inch, and I don't want it to be heavy because I might be taking it outdoors) I'm actually impressed when I saw HP Pavilion DV6t but the screen resolution seems to be a little too small for 15.6 inch. The Pavilion DV3 are also good but I want to know if there other options. Looking for some opinions.. Thanks. :D

  Read the article

• How can I "share" a network share over the internet to multiple operating systems?

  - by Minsc

  Hello all, We have a network share accessible through our intranet that is widely used. This share has it's own set of fine tuned permissions. I have been tasked with allowing A.D. authenticated access to this share over the internet without the use of VPN. The internet access has to mimic the NTSF permissions in place on the share. Another piece of the puzzle is that the access over the internet has to allow perusal of the share from Windows and Mac OS systems. I had envisioned a web front end that would facilitate downloading to and uploading from the share via a web browser. I'm trying to ask for some suggestions about what type of setup is necessary to achieve this. I've done loads of testing and searching for solutions but I can't seem to get anything to work as I hope. The web server that will be handing all of this is a Windows 2K8 box with IIS 7. How can I allow the users to authenticate against Active Directory when coming from the internet even when coming from a Mac system? I hope my question is not too broad, I'm sorry if I should have broken it up into multiple questions. It all is just tied together in my head. Thank you all for your time and aid.

  Read the article

• Officially announced RAM support size doesn't apply to one of twin rigs with just one difference

  - by Deniz

  It'll take a little long to describe my situation but here goes the story : In January 2009 we bought (the OEM parts) two similar systems with just one difference. One of them had a Phenom X4 cpu and the other one (mine) a Phenom X3 cpu. At the beginning we had problems with both systems to power them on whilst having all of their ram slots being full. We decided to install the systems with just 2 slots populated and later try to install the rest of ram sticks. Both systems did succeed to support 3 sticks. We tried many different procedures to make the systems work with their fourth ram slots being populated. We waited for new bios updates and flashed the boards when they were available, we tried different ram sticks with different frequencies etc. One day while we were trying to install the fourth stick, the X4 machine did accept it. The other one did not. The most mind boggling thing was that after one of my trials the X3 system begun to not operate with the third slot populated. Our boards did have AMD 770 chipsets and we even tried to change the board of the X3 machine with another 770 chipset board. Now my questions are : Should we change the cpu ? What is causing the X3 system to not accept the fourth (or now the third) ram stick ? The manufacturers sites do claim that this boards do accept 4 ram sticks (but they only tested them with certain ram brands and models). What are the limitations for maximum ram configurations on motherboards ? Are there some "rules of thumb" except frequency, voltage, chip type considerations for which we did check our parts ? Our boards are : Gigabyte GA-MA770-DS3 Sapphire PC-AM2RX780 - PURE CrossFireX 770

  Read the article

• Dell Poweredge 1950 with Perc 5i keeps losing raid config -> "Foreign Configuration Found"

  - by nosage

  The quick and dirty: the machine is a Dell Poweredge 1950, dual xeon quad cores, 8GB of ram, 2 2TB seagate SATAs in (supposed to be raid1) using a Perc 5i raid card. They are hot-swappable with a back-plane. I can build the raid fine and after a little while an install of server 08 r2 will blue screen and restart. When it comes up the raid controller says "Foreign Configuration Found." When I go into the raid configuration panel there is no raid listed but I can import the "foreign config", and the OS will boot up fine, until it blue screens again after a little while. The issue is OS independent. I have tried swapping raid cards, swapping the RAM module on the raid card and swapping the raid battery, all to no avail. Its almost as if there is a loose connection from the raid card to the back plane and both of disks get lost and the raid card drops the config. But it sees the disks fine when it boots back up. The raid card uses a SCSI SAS cable to connect to the back-plane so I guess the next step is to replace that, but... then I might as well replace the back-plane with a SCSI SAS to sata breakout cable, but... then I need a way to power the disks. Sorry for the wall of txt but it would be great to get some thoughts from people who worked with perc raid cards or poweredge servers with this type of issue before. Ironically I want to get this system up and running so I can work on MCITP labs. Thank you for any/all help and feel free to ask questions!

  Read the article

• Mac Management Without Permission and Security

  - by Bart Silverstrim

  I was going through some literature on managing OS X laptops and asked someone some questions about usage scenarios when using the MacBooks. I asked someone more knowledgeable than I about whether it was possible for my Mac to be taken over if I were visiting another site for a conference or if I went on a wifi network at a local coffee house with policies from an OS X Server with workgroup manager (either legit for the site or someone running a version of OS X Server on hardware they have hidden somewhere on the network), which apparently could be set up to do things like limit my access to Finder or impose other neat whiz-bang management features. He said that it is indeed possible for it to happen as it would be assigned via the DHCP server and the OS X server would assume my Mac is a guest and could hand out restrictions and apparently my Mac will happily accept them without notifying me or giving me an option, unlike Windows which I believe would need to be joined to a domain before it becomes "managed" by Active Directory. So my question is as network admins and sysadmins with users traveling with MacBooks, is there a way to reasonably protect your users from having their machines hijacked without resorting to just turning off networking all the time? Or isn't this much of a security hazard? What threat does this pose to the road warriors in your businesses?

  Read the article

• SSD, AHCI and write performance

  - by Dan

  We've started to deploy SSD drives to our developers workstations. At this moment we're having the unpleasant surprise that the systems using the new SSDs often freeze, with the HDD activity led blinking or being continuously on. Benchmarks shows read speeds around 180 MB/s, but write speeds around 5 MB/s. All developers are using Windows 7 Enterprise, 64 bit, SP1. One of our developers suggested (based on his experience) the following sequence: backup the workstation use a tool to completely erase the SSD make sure AHCI is enabled in BIOS install Windows restore from backup So far, this procedure seems to work (we're still testing, but write speed seems to be 120 MB/s). There are some questions in this context: why do we have to completely reinstall Windows? Is it possible to clean the SSD without reinstalling Windows? Is there a reliable tool? If AHCI was disabled when Windows was installed and we enable it, shouldn't this be enough to correct the write performance issue? If we have to completely erase the SSDs, does this mean the SSDs we've received were used before (SH)? I'm wondering this because the package I've got was open (I didn't think about it at that time, as I considered one of my coworkers simply took a peek inside the package). Has anyone seen a similar problem before?

  Read the article

• Intel DriverInstall issue on HP ProLiant server DL580G5

  - by TomTom

  Given: A HP ProLiant server to be used for Hyper-V server (R 2) Problem: The server has a HP NC364T quad port card, which actually is an Intel 1000 Pro adapter. We are stuck getting this adapter properly working. We need to get it working with: 2 trunks of 2 ports each one of them fully vlan "aware" (without filtering anything - so that Hyper-V can do the VLAN filtering). So far we did: Install the server Install latest PSP. Problem here - tool does not work to set up teaming. We tried to install the latest ProWin pack from Intel - the drivers there are a LOT more current (26th of Marrch 2010, 9.13.41.0). The intalled driver (Microsoft) is ancient (march 2009, 9.13.4.10) A driver update fails both on command line (pnputil) as well as the PortLock device manager executable. No informatoin is provided. the ANS toolset can not create teams (fails with error - again, no reason provided), I know of no logs and the event log has no information either. Questions: What are the best drivers to use? How do we actually install them? How can we then set up teaming and how do we set up the VLAN behavior wanted?

  Read the article

• Win Server 2k and Win 7 client

  - by Ray Kruse

  I have a Win Server 2000 system with AD configured. The network consists of an OKI printer, a network server, a wifi router a Win 2k client and the server. I'm trying to connect a Win 7 client. The purpose of the network, besides sharing equipment is to move files from client to client and scatter backups over more than 1 machine. The Win 7 client is configured for DHCP and does in fact receive it's IP and DNS configuration from the server and it sees the printer, wifi router and network drive, but does not see the Win 2k client nor the Win 2k server. I have tried the LAN Management Authentication Level set to 'Send LM & NTLM responses' with the 128 bit encryption removed. I've also done the registry hack on the key 'LmCompatibilityLevel'. Neither of these have helped. I have two questions: Is there a fix or is Win 2k totally incompatible? Is the best (or quickest/cheapest) fix to upgrade the server to Win 2k3 and not worry about the Win 2k client? Thanks for any help. Ray Kruse Buffalo, KY

  Read the article

• When to use Truecrypt, and when not to?

  - by tm77

  I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

  Read the article

• Symantec Protection Suite Enterprise Edition

  - by rihatum

  We (our company) are planning to deploy Symantec Endpoint Protection and Symantec Desktop Recovery 2011 Desktop Edition to our 3000 - 4000 workstations (Windows7 32 and 64) with a few 100s with Windows XP 32/64 Bit. I have read the implementation guide for SEP and have read tech-notes for Desktop Recovery 2011. Our team have planned to deploy this as follows : 1 x dedicated SQL 2008R2 for Symantec Endpoint Protection (Instead of using the Embedded Database) 1 x Dedicated SQL 2008R2 for Symantec Desktop Recovery 2011 (Instead of using the Embedded Database) 1 x Dedicated W2K8 R2 Box for the SEPM (Symantec Endpoint Protection Manager - Mgmt. APP) 1 x Dedicated W2K8 R2 Box for the Symantec Desktop Recovery 2011 Management Application Agent Deployment : As per Symantec Documentation for both of the above, an agent can be pushed via the Mgmt. Application (provided no firewalls are blocking ports required etc. - we have Windows firewall disabled already). Above is the initial plan we have for 3000 - 4000 client workstation (Windows) Now my Questions :-) a) If we had these users distributed amongst two sites with AD DC / GC in each site, How would I restrict SEPM and Desktop Mgmt. solution to only check for users in their respective site ? b) At present all users are under one building but we are going to move some dept. to a new location (with dedicated connectivity), How would we control which SEPM / MGMT Server is responsible for which site ? c) What Hardware would you recommend as a Server spec for the SQL server 16GB RAM, Dual XEON? d) What Hardware would you recommend as a Server spec for the MGMT Servers 16GB RAM each with DUAL xeon and sas disks? e) Also, how do you or would you recommend to protect these 4 servers (2 x SQL and 2 x MGMT Servers)? f) How would you recommend to store backups for these desktops? We do have a SAN and a NAS in our environment and we do have one spare DAS (Dell MD3000). If you have anything to add / correct - that will be really helpful before diving into the actual implementation phase. Will be most grateful with your suggestions, recommendations and corrections with above - Many Thanks ! Rihatum

  Read the article

• Search for files after a relative date using Windows search

  - by Zoredache

  I am looking for a way to save a search that includes a relative date. Specifically I am looking for a way to save a search that matches files that have a modification date that is 7 days ago. I have read the Windows Search Advanced Query Syntax document and I am not seeing a way to say 7 days ago. The numbers and ranges section does mention that relative dates are possible. The problem is that the relative dates described there do not fit the criteria I need. The lastweek almost looks like what I want except if I run a query like after:lastweek on a Monday it will only show my file that have been modified since Sunday at 12:00. The lastweek/lastmonth seem to relative to the start of the week/month which is not what I need. Multi-word relative dates: week, next month, last week, past month, or coming year. The values can also be entered contracted, as follows: thisweek, nextmonth, lastweek, pastmonth, comingyear. One nice thing about saved searches is that they are stored as an XML document and the file format is documented. I am not seeing how to form a correct value for a datetime. If I was able to understand this format, I suspect I could use a text editor and created a saved search that does what I want. Fragment from the examples: <conditions> <condition type="leafCondition" valuetype="System.StructuredQueryType.DateTime" property="System.DateModified" operator="imp" value="R00UUUUUUUUZZXD-30NU" propertyType="wstr" /> </conditions> To summarize I am looking for an answer to one or both of these questions How do I make a query for '7 days ago' using the standard syntax? How is the DateTime stored in a saved search?

  Read the article

• Linux: Managing users, groups and applications

  - by RN

  I am fairly new to linux admin so this may sound quite a noob question. I have a VPS account with a root access I need to install Tomcat, Java on it and later other open source applications as well. Installation for all of these is as simple as unzipping the .gz in a folder. My questions are A) Where should I keep all these programs? In Windows, I typically have a folder called programs under c:\ where I unzip all applications. I plan to have something similar here as well. Currently, I have all these under apps folder under/root- which I am guessing is a bad idea B) To what group should Tom belong to ? I would need a user - say Tom who can simply execute these programs. Do I need to create a new group? or just add Tom to some existing group ? C) Finally- Am I doing something really stupid by installing all these application by simply unzipping them? I mean an alternate way would be to use Yup or RPM or something like that to install these applications. Given my familiarity and (tight budget) that seems too much to me. I feel uncomfortable running commands which i don't understand too well

  Read the article

• Best Practical RT, sorting email into queues automatically using procmail

  - by user52095

  I'm trying to get incoming e-mail to automatically go directly into whichever queue/ticket they are related to or create a new one if none exist and the right queue e-mail setup in the web interface is used. I will have too many queues to have two line items within mailgate per queue. A similar issue was discussed here (http://serverfault.com/questions/104779/procmail-pipe-to-program-otherwise-return-error-to-sender), but I thought it best to open a new case instead of tagging on what appeared to be an answer to that person's query. I'm able to send and receive e-mail (via PostFix) to the default rt user and this user successfully accepts all e-mail for the relative domain. I have no idea where the e-mail goes - it's successfully delivered, but it does not update existing tickets (with a Subject line match) and it does not create any new. Here's and example of my ./procmail.log: procmail: [23048] Mon Aug 23 14:26:01 2010 procmail: Assigning "MAILDOMAIN=rt.mydomain.com " procmail: Assigning "RT_MAILGATE=/opt/rt3/bin/rt-mailgate " procmail: Assigning "RT_URL=http://rt.mydomain.com/ " procmail: Assigning "LOGABSTRACT=all " procmail: Skipped " " procmail: Skipped " " procmail: Assigning "LASTFOLDER={ " procmail: Opening "{ " procmail: Acquiring kernel-lock procmail: Notified comsat: "rt@18337:./{ " From [email protected] Mon Aug 23 14:26:01 2010 Subject: RE: [RT.mydomain.com #1] Test Ticket Folder: { 1616 Does the notified comsat portion mean that it notified RT? The contents of my ./procmailrc: #Preliminaries SHELL=/bin/sh #Use the Bourne shell (check your path!) #MAILDIR=${HOME} #First check what your mail directory is! MAILDIR="/var/mail/rt/" LOGFILE="home/rt//procmail.log" LOG="--- Logging ${LOGFILE} for ${LOGNAME}, " VERBOSE=yes MAILDOMAIN="rt.mydomain.com" RT_MAILGATE="/opt/rt3/bin/rt-mailgate" #RT_MAILGATE="/usr/local/bin/rt-mailgate" RT_URL="http://rt.mydomain.com/" LOGABSTRACT=all :0 { # the following line extracts the recipient from Received-headers. # Simply using the To: does not work, as tickets are often created # by sending a CC/BCC to RT TO=`formail -c -xReceived: |grep $MAILDOMAIN |sed -e 's/.*for *<*\(.*\)>* *;.*$/\1/'` QUEUE=`echo $TO| $HOME/get_queue.pl` ACTION=`echo $TO| $HOME/get_action.pl` :0 h b w |/usr/bin/perl $RT_MAILGATE --queue $QUEUE --action $ACTION --url $RT_URL } I know that my get_queue.pl and get_action.pl scripts work, as those have been previously tested. Any help and/or guidance you can give would be greatly appreciated. Nicôle

  Read the article

• Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

  - by posdef

  I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

  Read the article

• Domino to Exchange 2007 (or 2010) Design Concerns?

  - by NickToyota

  Today we got the executive green light to proceed with changing from a Domino platform to Exchange. The business prefers Exchange for a messaging platform. (even though IMO IBM Domino is fine - if it aint broke, don't fix it but it was not my call). I have been put in charge of Domino to Exchange process goes smoothly as possible. I have also been told to put together costs for this project. I have some questions and concerns re: network design, licensing, costs: The current setup is as follows. 1 HQ office (100 users), 1 secondary office (50 users), 5 branch offices (under 10 users). 5 different email domains Windows Server 2003 functional level with a few 2008 R2 Servers Lotus Domino Notes Servers (one in each office) Ironmail Appliance Public Domino Web Mail server Majority G5+ Proliant Servers Domino Blackberry Enterprise license and server No VoIP phones What are the basic hardware requirements for Exchange 2007 or 2010? Can I simply purchase a single physical server? Will each office require an Exchange server or possibly additional servers (roles)? How is email routed to the smaller branch offices? Standard or Enterprise licenses? The business has been running Domino (messaging and application services) for over 10 years and also want Exchange to support email services, Blackberry, Outlook Web Access, possibly support for iPhone devices. Thank you Serverfault universe.

  Read the article

• Remote server security: handling compiler tools

  - by Gonzolas

  Hello! I was wondering wether to remove compiler tools (gcc, make, ...) from a remote production server, mainly for security purposes. Background: The server runs a web application on Linux. Consider Apache jailed. Otherwise, only OpenSSHd faces the public network. Of course there is no compiler stuff within the jail, so this is about the actual OS outside of any jails. Here's my personal PRO/CON list (regarding removal) so far: PRO: I had been reading some suggestions to remove compiler tools in order inhibit custom building of trojans etc. from within the host if an attacker attains unpriviliged user permissions. CON: I can't live without Perl/Python and a trojan/whatever could be written in a scripting language like that, anyway, so why bother about removing gcc et al. at all. There is a need to build new Linux kernels as well as some security tools from source directly on the server, because the server runs in 64-bits mode and (to my understanding) I can't (cross-)compile locally/elsewhere due to lack of another 64-bits hardware system. OK, so here are my questions for you: (a) Is my PRO/CON assessment correct? (b) Do you know of other PROs / CONs to removing all compiler tools? Do they weigh in more? (c) Which binaries should I consider dangerous if the given PRO statement holds? Only gcc, or also make, or what else? Should I remove the enitre software packages them come with? (d) Is it OK to just move those binaries to a root-only accessible directory when they are not needed? Or is there a gain in security if I "scp them in" every time? Thank you!

  Read the article

• How to make 7-Zip faster

  - by Matt

  I normally use WinRAR over 7-Zip simply because it's faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7-Zip and WinRAR default settings on their normal compression and their best compression, and in a lot of cases WinRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7-Zip speed up? I'd like it to at least be on par with WinRAR's speed Is there a way to make recovery segments in 7-Zip like you can in WinRAR? I didn't see any, but I guess it could be a command line thing. I tested WinRAR and 7-Zip using the latest stable version of each (4-dot-something with 7-Zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core Intel i7 720 (1.6 GHz)/(2.8 GHz) with 4 GB DDR3 RAM, and the 64-bit version of 7-Zip, and dual-boot Debian x64 5.0.4 and Windows 7 Home.

  Read the article

• SQL Server on Linux

  - by TimothyAWiseman

  For a particular project that is coming up, I am trying to expand my knowledge of Linux, so I am going to set up a Linux system at home. Rather than dual booting, I am thinking about putting SQL Server on a Windows Virtual Machine with Linux as the host at least until this project is over when I will probably switch back to Linux. So, I have a couple of different, but interrelated questions: How well does this work? This is only a test machine at home, so I can easily accept a fair bit of degradation, but if it is going to be a horrible reduction in performance I will dual boot instead. Is there a particular virtual machine manager I should look at to go this route? Since this is my personal machine, price is an issue but I am quite happy to pay a reasonable amount. And finally, given the choice of VMM, is there a particular Linux Distro I should be looking at? [This has been cross posted at Ask.SqlServerCentral.com . I think it may be appropriate at both sites. ]

  Read the article

• Which IP should I use for my nameserver

  - by Luke Bream

  Sorry to ask whats probably very obvious question. I have just got a new server that is fantastically cheap but unfortunatly doesnt come with any technical support and Im very out of my depth ! My hosting company has provided the following information... Below you will find your additional IP addresses added to the server 5.9.36.51 Please note that you can use the subnet only for this server. IP: 5.9.225.64 /27 Mask: 255.255.255.224 Broadcast: 5.9.225.95 Useable IP addresses: 5.9.225.65 to 5.9.225.94 It has cPanel with WHM and im going through the setup... I have a number of questions... my domian is purchased from godaddy and I want to use it as the name server. Question 1: Which IP or IP's do I enter into the godaddy interface for ns1.mydomian.com ns2.mydomain.com Question 2: In the WHM nameserver setup what do I enter for... Please enter an IP address for each of your nameservers. ns1.mydomain.com ?????? ns2.mydomain.com ?????? Add "A Entries" for Hostname IP for Entry: ????????? Thanks for aany help you can give Luke

  Read the article

• BGP Multipath & return routes

  - by Dennis van der Stelt

  I'm probably a complete n00b concerning serverfault related questions, but our IT department makes a bold statement I wish to verify. I've searched the internet, but can find nothing related to my question, so I come here. We have Threat Management Gateway 2010 and we used to just route the request to IIS and it contained the ip address so we could see where it was coming from. But now they turned on "Requests apear to come the TMG server" so ip addresses aren't forwarded anymore. Every request has the ip of the TMG server. Now the idea behind this is that because of multipath bgp routes, the incoming request goes over RouteA, but the acknowledgement messages could return over RouteB. The claim is that because the request doesn't come from the first known source, our proxy, but instead from IIS, some smart routers at the visitor of our websites don't recognize the acknowledgement message and filter it out. In other words, the response never arrives. Again, this is the claim. But I cannot find ANY resources on the internet that support this claim. I do read about bgp multipath, but more in the case that there are alternative routes when the fastest route fails for some reason. So is the claim completely bogus or is there (some) truth to it? Can someone explain or point me to resources? Thanks in advance!

  Read the article

• WRTU54G-TM router with 3rd party firmware; Can custom firmware include stock binary portions?

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly? Update I have found someone working on 3rd party WRTU54G-TM firmware. I am still interested in my second part of the questions, that is can't the stock firmware images be pulled apart and have the close-source, if any, binary kernel modules moved into another more flexible custom firmware?

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >