Search Results

Search found 21717 results on 869 pages for 'setup versions'.

Page 551/869 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• ASP Fails with 500 Error

  - by VinceM

  We have a server setup as an IIS box and have some static pages with a few asp pages that handle the form submissions. The asp is really vbscript that sends a CDO message. When moving these pages to the new server the form will not submit, it gives a 500 error and the following shows in Event Viewer: Error: The Template Persistent Cache initialization failed for Application Pool 'DefaultAppPool' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. I can't seem to find any info on this anywhere... I was thinking it may have something to do with the fact that we created this server from an image of another server. Thanks for your help in advance... Vince

  Read the article

• Wordpress 3 multi-site install

  - by mike

  Hello, Trying to figure out if this is possible... My company has a cms product that was written in Java and we decided to use Wordpress to run blogs for our clients. Obviously, Wordpress does not run on tomcat(at least not by default) so we installed Pound(http://www.apsis.ch/pound/) on our server and have setup any Apache and Tomcat on different ports. When "/blog/" is requested, the request is directed to Apache. This works fine but we would like to use Wordpress multi site so that we can manage all the blogs from a single interface. We would also like the url for every site to be "/blog/" example: http://www.site1.com/blog/ http://www.site2.com/blog/ I'm thinking it would have to be done with apache??? Is it even possible? Thanks!

  Read the article

• Everytime I ping my server, it is pinging localhost instead?

  - by esac

  I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• How to populate a private container for unit test?

  - by Sardathrion

  I have a class that defines a private (well, __container to be exact since it is python) container. I am using the information within said container as part of the logic of what the class does and have the ability to add/delete the elements of said container. For unit tests, I need to populate this container with some data. That date depends on the test done and thus putting it all in setUp() would be impractical and bloated -- plus it could add unwanted side effects. Since the data is private, I can only add things via the public interface of the object. This run codes that need not be run during a unit test and in some case is just a copy and paste from another test. Currently, I am mocking the whole container but somehow it does not feel that elegant a solution. Due to Python mocking frame work (mock), this requires the container to be public -- so I can use patch.dict(). I would rather keep that data private. What pattern can one use to still populate the containers without excising the public method so I have data to test with? Is there a way to do this with mock' patch.dict() that I missed?

  Read the article

• IIS6 can't find site on local network

  - by chezy525

  I have a windows 2003 server with dual NICs running IIS6. I can access everything remotely, but the internal network can't seem to find the site regardless of which IP Address I try to go to. There are really several weird things that are happening here, but I'm going to limit this question to what I'm guessing to be the simplest problem (the solution to which I'm hoping solves other things as well): From the server itself, I can access the webpage using the primary IP address (i.e. http://192.168.1.2/index.htm), but not using the secondary IP address (i.e. http://10.10.10.2/index.htm). Self pinging both IP addresses works, and the "Web site identification" in IIS has the IP address set to "(All Unassigned)"... which I believe should bind both IP addresses to this site. I apologize if I'm not providing enough details about my setup, but at this point I don't even know what's relevant...

  Read the article

• Javascript Event in Innerhtml Resulting from PHP Server Script

  - by user144527

  I'm (very slowly) making a website, and I'm creating a search engine for the database, which is essential to organize the dependencies during data entry. Anyway, what I would like is to type a few keywords into a box, have a menu pop up with various search results, and have the box fill with the ID number of the selected entry when it's clicked. Currently, I have a document called search.php which fills a div called search-output using xmlhttp.open() and the innerhtml property. Everything is working perfectly except for filling the original search box with the ID number when clicking. My first attempt was to add an onclick event to each entry in the output from search.php. Unfortunately, I found that javascript inserted into innerhtml is not run for security reasons. I've been Googling for hours but haven't been able to find a solution. How can I get the original search text box to fill with the correct ID when I click it? Is what I'm doing a good setup for the results I desire, or is there a better way to integrate search features into data entry?

  Read the article

• Protecting a webpage with an authentication form

  - by Luke

  I have created an employee webpage with a lot of company info, links, etc., but I want to protect the page because it contains some confidential company information. I am running IIS7.5 on Windows Server 2008 R2, and I already have the site setup as a normal, non-protected site. I want all active directory users to have access to the site. This is not an intranet site, it is exposed to the internet. I tried setting it up using Windows Authentication, but I had problems with multiple login prompts, etc. I just want a simple form for users to enter their credentials and have access to the site, and I need it to query the AD for login. I've searched the web for a guide on this, but I can't seem to find one that fits my situation. This is not a Web App. It is just a simple html site. Does anyone have any suggestions or a link to a guide on this? Thanks so much! -LB

  Read the article

• Danger in running a proxy server? [closed]

  - by NessDan

  I currently have a home server that I'm using to learn more and more about servers. There's also the advantage of being able to run things like a Minecraft server (Yeah!). I recently installed and setup a proxy service known as Squid. The main reason was so that no matter where I was, I would be able to access sites without dealing with any network content filter (like at schools). I wanted to make this public but I had second thoughts on it. I thought last night that if people were using my proxy, couldn't they access illegal materials with it? What if someone used my proxy to download copyright material? Or launched an attack on another site via my proxy? What if someone actually looked up child pornography through the proxy? My question is, am I liable for what people use my proxy for? If someone does an illegal act and it leads to my proxy server, could I be held accountable for the actions done?

  Read the article

• SharePoint 2010 and Excel Calculation Services

  - by Cj Anderson

  I'm curious what the requirements are for Excel Calculation Services in Sharepoint 2010. I found an architecture document but it doesn't list out the specific requirements. (architecture I understand that you can install all the services on one server but it isn't recommended. It then talks about how you can scale up the application servers, and web front ends. What should the hardware look like for both the application server and web front ends? Do I need to setup a standalone box for each application server?

  Read the article

• How to mount a iSCSI/SAN storage drive to a stable device name (one that can't change on re-connect)?

  - by jcalfee314

  We need stable device paths for our Twinstrata SAN drives. Many guides for setting up iSCSI connectors simply say to use a device path like /dev/sda or /dev/sdb. This is far from correct, I doubt that any setup exists that would be happy to have its device name suddenly change (from /dev/sda to /dev/sdb for example). The fix I found was to install multipath and start a multipathd on boot which then provides a stable mapping between the storage's WWID to a device path like this /dev/mapper/firebird_database. This is a method described in the CentOS/RedHat here: http://www.centos.org/docs/5/html/5.1/DM_Multipath/setup_procedure.html. This seems a little complicated though. We noticed that it is common to see UUIDs appear in fstab on new installs. So, the question is, why do we need an external program (multipathd) running to provide a stable device mount? Should there be a way to provide the WWID directly in /etc/fstab?

  Read the article

• raid advice with SSD and two HDD

  - by Nin

  I have a new machine with one 128GB SSD and two 1TB HDD. On the SSD is the OS and my initial thought was to put the two HDD in RAID 1 for user data. After some more thought I came up with two other setups and now I'm in doubt :) Can someone advise what would be the best setup? 1: single SSD and HDD in RAID 1 (original thought) 2: Create 2 partitions on the HDD (128GB and 872GB). Put the two 872GB in RAID 1 and create another RAID 1 with the SSD and one 128GB HDD partition. 3: Create 2 partitions on the HDD (750/250), put the 705GB in RAID 1 and use the 2 250GB as backup and make automatic snapshots of the SSD to (one of) these partitions. I think the 2 main questions are: Is it advisable to create a raid array with only part of a drive and actively use the other part of that drive or should you always use the full disk? Is it advisable to create a raid 1 array with a SSD and HDD or will that blow the whole speed advantage of the SSD?

  Read the article

• How to make TortoiseHg pull certain branch only?

  - by mark

  I have cloned the default branch of a big repository and now I wish to pull from the server using the TortoiseHg client. However, TortoiseHg proposes to pull from all the branches. Is it possible to instruct it to pull from the current branch only? So far I have seen suggestions to: Setup a hook on the client side to reject pulls from unwanted branches Check incoming revisions in TortoiseHg and only pull the ones belonging to the current branch Use the Mercurial ACL extension to deny access to all the branches, but the current one. I dislike all of these solutions, since all of them are client based. In all of them TortoiseHg actually pulls all of the branches (even in the second, where the pulled revisions are arranged into a bundle presented in the incoming revisions view) Is there an hg pull -b BRANCH equivalent in TortoiseHg? Thanks. EDIT I know how to do all of this using the Mercurial command line client - hg.exe. This question is specifically about the TortoiseHg GUI client.

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• SSD on Vmware ESXI 4 (TRIM? Good Idea?)

  - by nextgenneo

  Hi, I just posted about finding bottle necks and have narrowed it down to having way too many VMs on my machine on one 15K SAS drive. I have plenty of cores and plenty of ram. So I am planning on putting 6 VMs on one drive (so 5 drives for 30 VMs). I am thinking of using a 60GB Vertex 2 SSD. Each of my VMs will only need about 6GB of HDD space so this isn't a big deal. My questions are: does ESXI support Trim and do I really need it if I leave 25% of the drive as free space? If I need it should I get a diff drive that handles garbage collection differently? I have a RAID controller w/ write caching. I will still benefit from this? Will this effect my setup differently? Is there anything I need to consider regarding SSD's in virtualized environments. Thanks for any and all help!

  Read the article

• How to modify existing keyboard layout (RU, kbdru.dll)?

  - by Anton

  There's a program I'm thinking of using called Punto Switcher that detects a language I'm typing in and switching entire word between Russian and English. The problem I have with this setup is that even though most of Russian letters "correspond" to English letters, Russian keys are scattered all over the keyboard and I don't feel like learning them all as I type in English mostly. Now, the program is very specific about me using RU, kbdru.dll file, not any other and if I use a custom keyboard under Russian, it doesn't recognize what I type so I think I should change the default RU keyboard. I created my custom keyboard using Microsoft's tool and I need to modify original one. I think it will take more than just replacing a file. Help?

  Read the article

• Forwarding subdomain to different port on Windows IIS 7

  - by Ralph

  I have a IIS 7 server with Plesk setup on a Windows 2008 R2 server and I have created a subdomain sub1.domain.com, which by default leads to my webserver on port 80, but I don't want that. I want the subdomain to lead to my port 25566 instead (for a Minecraft server), how can I accomplish this? I tried this with host headers / bindings but that resulted in a port already in use warning. How can I do this? How can I make my sub1.domain.com lead to IP.IP.IP.IP:25566? Any help would be greatly appreciated.

  Read the article

• How to trigger chef-client on all nodes from my workstation

  - by divyanshm

  I have 5 nodes and all of them have one setup cook-book in common. Now I would like to add another task in this common cookbook that would configure SQL server for me on all the nodes. Is there a way/command to manually trigger this change across all clients right away? I use azure VM's. All the nodes are Windows Server 2012 machines. I could do a knife winrm machine-name chef-client -m -x username -P password on all the machines, but i'm sure there should be a better way of doing this. I'm new to using chef, so I might be missing a very basic command here.

  Read the article

• Is there a way to schedule an automatic WinClone run on my Bootcamp partition?

  - by user17873

  Hi, I've currently got time machine setup to back up my entire OS X installation. I also have a backup tool within my Bootcamp Windows 7 installation which automatically backs up my windows profile data to an external drive partition. Finally, I'm also backing up my Bootcamp partition weekly and storing on an external drive using WinClone. The final piece I need to complete my external backup process is to have the WinClone application backup my Bootcamp partition automatically once a week rather than having to call it manually and remember. Is this possible?

  Read the article

• How can I force all requests to be SSL when using EC2 load balancer?

  - by chris

  I currently have a single EC2 instance which is forcing all requests to be secure by using mod_rewrite: RewriteEngine On RewriteCond %{SERVER_PORT} !443 RewriteRule ^(.*)$ https://%{HTTP_HOST}$1 [R,L] I am planning on moving to a load balanced setup, with multiple back-end instances. If I set up my EC2 load balancer with my certs, do I need to use SSL to communicate between the LB and my instances? If not, is it as simple as replacing the RewriteCond with RewriteCond %{HTTP:X-Forwarded_Proto} ^http$ Edit: I tried using the x-forwarded-proto, but it does not appear to work. Is there another way to detect if someone is connected to the LB via SSL?

  Read the article

• Sharing VPN access between two computers on the LAN

  - by Axelle Ziegler

  I have VPN access to several machines in my office from my home machine. I'd like to be able to access those machines from another computer on my LAN, without setuping a second VPN access. Both computers are Windows 7 machines. Is there a way for my "main" computer to share its VPN access to another machine on the LAN? How would one setup this share? I don't think "simple" Internet connection sharing fits my needs because: My LAN already has its own DHCP/Router to access the Internet, and I'd like to keep it this way I can't access the Internet through my VPN connection

  Read the article

• External monitor on old Dell 700m?

  - by Adam Henne

  Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

  Read the article

• LDAP replication breaking referrals

  - by MasterZ

  We have an issue that we believe is caused by ldap replication changing the port of the referal from 686 (secure) to 389 (unsecure). If we setup a new referral everything works, but then as soon as we change someone's password it changes on the master, and then the master replicates and the referral breaks. Any further attempts to modify someone's account give the error "PAM: Cannot connect to LDAP". We used snoop and monitored the firewall to see what was going on. The first password attempt (the one that works) goes over port 686 (as it is supposed to) but every subsequent attempt attempts to use port 389, and therefore fails. We only have 1 referral configured on the client, port 686

  Read the article

• Rebuilding a Mac Mini (early 2009)

  - by Kelly Jones

  This weekend I decided to rebuild the family’s Mac Mini.  It’s the early 2009 model and I hadn’t done it since we got it in March of 2009.  Even worse, I had done the import data step (or whatever Apple calls it) which brought over all of the data files and apps from our previous Mac.  AND that install goes back to before 2005, as far as I can remember.  SO, to say that “cruft” had built up in the operating system, is probably a bit of an understatement. The rebuild went pretty smoothly, especially since I had a couple of spare hard drives.  I hooked up a spare USB drive and formatted it for use with the Mac.  I then used Carbon Copy to clone the internal hard drive onto the USB drive.  (Carbon Copy is a great little app that I used several years ago and I was happy to see it was not only still around, but updated as well.) Once I had my backup, I shut down the Mac and replaced the internal hard drive.  I had purchased the hard drive last fall to use with my work laptop, but I got a new work laptop (with awesome dual SSDs) so I wasn’t using it anymore.  The replacement drive (Seagate Momentus 7200.4 ST9500420AS 500GB 7200 RPM 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive) has more than double the original’s capacity and is also faster.  I’ll have to keep an eye on the temperature, since that 7200 drive will run hotter. Opening the Mac Mini is not for the easily intimidated!  That cool little case is quite the pain to open.  Luckily, OWC put a video together here.  After replacing the drive, I then installed a clean copy of OS 10.5 using the DVDs that came with the Mac.  After the OS, it was time to reinstall the apps.  I downloaded some of the freeware, just to make sure I had the latest versions.  For the rest, I just copied from the backup cloned drive to the new drive.  (I love the way most Mac apps are written – with almost everything contained within a “package” that I can just copy from one drive to another.  MUCH better than the Windows way of using shared DLLs and the registry to store critical pieces that the app needs in order to run!) The whole process took longer than I would have preferred, but it was long overdue.  It definitely “feels” faster, especially boot time and application launches.

  Read the article

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >