Search Results

Search found 45696 results on 1828 pages for 'system componentmodel'.

Page 551/1828 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >

  • Any screen capture software that captures webcam, microphone inputs too ?

    - by mohanr
    I am going to conduct a user study. Apart from capturing the screen while the user is interacting with the system, I also want to capture the video/audio of the user. Is there any software that in addition to capturing the screen also overlays it with the webcam/microphone inputs. The goal is to capture the complete experience of the user: key/mouse interactions with the system along with their facial/vocal responses. I know that I can maybe run a screen-capture software and also run a software for capturing webcam audio/video alongside and try to sync/overlay both these streams with timestamps. But I am going to be dealing with probably several hundred hours of data. So I am looking for a tool that can streamline the process for me amap and help me keep my sanity at end of the process. Thanks,

    Read the article

  • TeamViewer cannot connect

    - by Cetin Sert
    Last week I decided to use TeamViewer VPN to administer software on a server behind a firewall using RemoteDesktop. It was easy to configure to start-up with the system and make VPN available on the other side but now it fails to connect at the step shown below: The remote machine is running Windows Server 2008 R2. Is there a native way to circumvent the external firewall using a server role or feature to make Windows Server do the VPN work? Do people have better / more reliable experiences with other products such as Hamachi? The requirements are as follows: Start at remote system start-up time Make VPN connections to the remote machine possible

    Read the article

  • why does chkdsk always report errors on a bad shutdown

    - by rep_movsd
    Once in a while, Windows XP hangs on my laptop (usually when going into standby or hibernate and occasionally on startup) and I have to forcefully poweroff. Ususally chkdsk never runs automatically (I thought it should know that the partitions have nit been unmounted and do that). I religiously run chkdsk without /F after bad shutdowns like this, and invariably it reports that the drive has unfixed errors and must be checked with /F and I do that, and more often than not, the chdsk that runs on startup does not report fixing anything. I have had times in the past (and not only just on this system) when not running chkdsk leads to some strange errors like files not opening even though they exist and inability to save certain files, so I make it a point to always chkdsk after bad shutdown. I never understood why this is : Isnt the whole point of a journalling filesystem like NTFS to avoid file system corruption and endless chkdsks? I even tried once disabling write caching to see if it made any difference, but to no avail....

    Read the article

  • Windows with putty via USB serial cable to Linux serial port - output ok, input isn't

    - by Aharon Robbins
    I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5). I have /sbin/agetty -L 9600 ttyS0 in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control. I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but cat < /dev/ttyS0 just prints out weird characters from what I type. Any and all suggestions will be welcome. Thanks!

    Read the article

  • Using Diskpart in a PowerShell script won't allow script to reuse drive letter

    - by Kyle
    I built a script that mounts (attach) a VHD using Diskpart, cleans out some system files and then unmounts (detach) it. It uses a foreach loop and is suppose to clean multiple VHD using the same drive letter. However, after the 1st VHD it fails. I also noticed that when I try to manually attach a VHD with diskpart, diskpart succeeds, the Disk Manager shows the disk with the correct drive letter, but within the same PoSH instance I can not connect (set-location) to that drive. If I do a manual diskpart when I 1st open PoSH I can attach and detach all I want and I get the drive letter every time. Is there something I need to do to reset diskpart in the script? Here's a snippet of the script I'm using. function Mount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [Parameter(Position=1,Mandatory=$false,ValueFromPipeline=$false)] [string]$DL, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## Diskpart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path" `nAttach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 3 @" Select VDisk File="$Path"`nSelect partition 1 `nAssign Letter="$DL" Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart } end { Remove-Item -Path $DiskpartScript -Force ; "" Write-Host "The VHD ""$Path"" has been successfully mounted." ; "" } } function Dismount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [switch]$Remove, [switch]$NoConfirm, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } function RemoveVHD { switch ($NoConfirm) { $false { ## Prompt for confirmation to delete the VHD file ## "" ; Write-Warning "Are you sure you want to delete the file ""$Path""?" $Prompt = Read-Host "Type ""YES"" to continue or anything else to break" if ($Prompt -ceq 'YES') { Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } else { "" ; Write-Host "Script terminated without deleting the VHD file." ; "" } } $true { ## Confirmation prompt suppressed ## Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } } } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## DiskPart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path"`nDetach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 10 } end { if ($Remove) {RemoveVHD} Remove-Item -Path $DiskpartScript -Force ; "" } }

    Read the article

  • Connecting a limited user to win server 2003 through LogMeIn

    - by Jeff
    Logmein support can't help me, maybe someone here can. I have a user on a windows 2003 server (non administrator). When I first created him and tried to connect through remote desktop I got the error "The local policy of the system does not permit you to logon interactively." I looked up the error and saw that this user was not a member of the Remote Desktop Users group. I added him to the group and was able to remote desktop in just fine. Then I tried to connect this user to the server through LogMeIn (pro trial version). I got the same error as when the user was not a part of the Remote Desktop Users group ("The local policy of the system does not permit you to logon interactively."). Can anyone tell me any other groups the user must be a member of in order to be allowed access through LogMeIn? I would image this is a common requirement logmein support seemed to have no idea.

    Read the article

  • How can I set audit controls on files owned by TrustedInstaller using Powershell?

    - by Drise
    I am trying to set audit controls on a number of files (listed in ACLsWin.txt) located in \%Windows%\System32 (for example, aaclient.dll) using the following Powershell script: $FileList = Get-Content ".\ACLsWin.txt" $ACL = New-Object System.Security.AccessControl.FileSecurity $AccessRule = New-Object System.Security.AccessControl.FileSystemAuditRule("Everyone", "Delete", "Failure") $ACL.AddAuditRule($AccessRule) foreach($File in $FileList) { Write-Host "Changing audit on $File" $ACL | Set-Acl $File } Whenever I run the script, I get the error PermissionDenied [Set-Acl] UnauthorizedAccessException. This seems to come from the fact that the owner of these files is TrustedInstaller. I am running these scripts as Administrator (even though I'm on the the built-in Administrator account) and it's still failing. I can set these audit controls by hand using the Security tab, but there are at least 200 files for which doing by hand may lead to human errors. How can I get around TrustedInstaller and set these audit controls using Powershell?

    Read the article

  • Booting From VIA VT6421A Based PCI SATA Card

    - by Priyan R
    I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

    Read the article

  • How can I get metrics such as incoming and outcoming traffic with Apache servers?

    - by hhh
    Suppose a network consisting of hubs A, B, C, D ... and X. I am looking for ways to visualize how users use the network such as incoming, outgoing and other metrics. In Apache logs, I can see some errs if something did not work but I have no realistic picture about such a system in general i.e. how the system actually works. I am looking for some sort of flow-analysis and I would like to get pure data to create some graph. Then analyze the graph with some metrics where I do not even know the right metrics, perhaps some dispersion metric. My goal is to create some sort of objective way to judge quality.

    Read the article

  • OpenVPN performance: how many concurrent clients are possible?

    - by Steffen Müller
    I am evaluating a system for a client where many OpenVPN clients connect to a OpenVPN server. "Many" means 50000 - 1000000. Why do I do that? The clients are distributed embedded systems, each sitting behind the system owners dsl router. The server needs to be able to send commands to the clients. My first naive approach is to make the clients connect to the server via an openvpn network. This way, the secure communication tunnel can be used in both directions. This means that all clients are always connected to the server. There are many clients summing up over the years. The question is: does the OpenVPN server explode when reaching a certain number of clients? I am already aware of a maximum TCP connection number limit, therefore (and for other reasons) the VPN would have to use UDP transport. OpenVPN gurus, what is your opinion?

    Read the article

  • Online remount btrfs of root filesystem with different subvolume (snapshot) [migrated]

    - by goncalopp
    Let's say you have a btrfs root filesystem on an online system. You want to revert the filesystem to an earlier state, of which you have a snapshot: remount /dev/sdaX / -o remount,subvol=snapshots/Y For the record, I've done this in a test system, and it does not work. The command returns with no errors, but the subvolume mounted is the same. If this did work, what would be the consequences? My guess is that open file descriptors would still point to the old subvolume, thus possibly leading to "data loss" on the new subvolume, if one was not careful. Assuming one goes to the trouble of closing and reopening all open file descriptors, does this sound feasible? Or are there other types of problems?

    Read the article

  • How can I troubleshoot a "Hardware Malfunction" blue screen?

    - by AaronSieb
    My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

    Read the article

  • Error Message: Primary Slave Drive - ATAPI Incompatible

    - by Jaleel Dwight
    So I recently switched towers and now, all of a sudden, I'm getting this error message as soon as I boot my system. The error message reads "Primary Slave Drive - ATAPI Incompatible". This has really been frustrating since there's NO Primary Slave Drive even installed in my computer!! I have one hard drive installed which is recognized as the Primary Master & a DVD Drive which is recognized as the Secondary Master. My old system ran flawlessly. I'm beginning to think maybe my motherboard is bugging out cuz I fail to understand how it can be telling me that a "nonexistent" drive is incompatible. Any suggestions??

    Read the article

  • User based BitLocker Drive Encryption

    - by Starx
    While Unlocking a Encrypted Drive.. It is possible for that drive to be unlocked for only the particular user and not all other users who use the system. For example, there are two users... User1 and User2, user1 unlocked a encrypted drive, now he locks the desktop and user2 comes and open the system from his account. Now, user2 also can access the drive which user1 unlocked. User2 must not be able to open the drive. If he has the password the the drive then he might have access but not before that.

    Read the article

  • Does NMBD depend on DHCP?

    - by Atilla Filiz
    I am trying to debug a SMB share issue on an embedded Linux setup. Before diving into source code, I want to make sure this is not a configuration problem. So here is my case: Scenario-1: dhcp server enabled by default 1- system boots 2- udhcpcd server starts 3- smb server starts (smbd) 4- nmb server starts (nmbd) 5- smb share accessible Scenario-2: dhcp server disabled by default 1- system boots 2- smbd starts 3- nmbd fails to start 4- smb share inaccessible 5- $/etc/init.d/udhcpcd start 6- $/usr/sbin/nmbd still fails without an error message The client pc and the server device have static IP addresses in both cases. Is it possible that, NMBD somehow depends on a DHCP server at start?

    Read the article

  • How do I find out what version of SMB is enabled on a remote host?

    - by Kal
    My local machine is running Windows 7, which supports the latest released version of the SMB protocol (SMB 2.1). I also have a remote host, and I don't know what operating system or SMB-support software is installed on that remote host; I only know that the remote host supports some version of the SMB protocol. How can I find out, from the command prompt (or PowerShell) of my Windows 7 machine, what version of SMB is supported by that remote host? Edit: although I mention Windows 7 above, I'm sure that this question is relevant to many system/network administrators or desktop support personnel, hence why I'm posting the question here instead of at superuser.com.

    Read the article

  • Best free (or cheap) ASP.NET based CMS for a club/association?

    - by marc_s
    I've been looking for a simple, intuitive ASP.NET based CMS to handle my club/association site. It should be based on ASP.NET so I can add some extra specific pages offer a membership system, e.g. I want to be able to define members which can e.g. comment posts, while anonymous users can only read (no active participation) have features like news, forums, blogs, picture gallery be simple and easy to use I've been looking at GraffitiCMS: so far my favorite, but it has no forum, and no membership system, and no future, it seems - no development whatsoever in over a year :-( Sitefinity: had extreme trouble even getting it installed, and when it's finally up and running, I find it overly complicated and not intuitive at all Umbraco: same problem - hard to install, hard to get up and running, the intro videos on their site are only available to paying subscribers (what's up with that deal???)..... DotNetNuke: seems like a major overkill Community Server: seems like a major overkill - and seems to be more and more commercial, only Any others I've missed that I should have definitely looked at ??

    Read the article

  • Ubuntu 9.10 Samba NT_STATUS_CONNECTION_REFUSED errors on remote machines.

    - by user40730
    SAMBA I'm running Samba on Ubuntu 9.10 on a MacBook Pro using Parallels. When I run the smbtree command, I get the following errors: peterv@MBP17U<2005$: sudo smbtree Enter root's password: session request to 192.168.1.156 failed (Called name not present) HADEN \SERVER2 cli_start_connection: failed to connect to SERVER2<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17WIN MBP17win cli_start_connection: failed to connect to MBP17WIN<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED \MBP17U \MBP17U\IPC$ IPC Service () \MBP17U\Perl \MBP17U\Home \MBP17U\print$ \MBP17 MBP17 cli_start_connection: failed to connect to MBP17<20 (0.0.0.0). Error NT_STATUS_CONNECTION_REFUSED Fri Apr 16 05:24:47 EDT 2010 The MBP17 failure is an OS X system, the SERVER2 failure is a Windows XP system. Running testparm shows no errors. Can someone please help me out?

    Read the article

  • How do you replace the files in a folder using Group Policy Preferences?

    - by GollyJer
    Our users have a toolbar on their Windows taskbar called "I Need Help". It holds links to our support system with specific fields prefilled. We've changed some of the structure our our support system and need to replace the links inside the folder. Some of the links have different names and some are being completely removed. Ideally we just want to clear the folder and replace it with a new set of files. What's the best way to do this through Group Policy Preferences in Windows Server 2008?

    Read the article

  • Mac OS X, MySQL Preference Pane doesn't work

    - by Steve Kuo
    I downloaded and installed MySQL 5.1.47 for OS X 10.6 using the DMG archive: mysql-5.1.47-osx10.6-x86_64.dmg I also installed MySQL.prefPane and MySQLStartupItem.pkg. MySQL.prefPane is a Preference Pane. The problem is, whenever I attempt to start/stop MySQL from the Preference Pane, System Preferences just hangs. It runs at about 50% CPU forever, eventually I have for force quit System Preferences. The same thing happens if I toggle "Automatically Start MySQL Server on Startup". Basically the MySQL Preference Pane is not functional. Note that I have no problem starting MySQL from the command line: sudo /usr/local/mysql/bin/mysqld_safe I have tried reinstalling MySQL and the Preference Pane. I'm using the standard installation location, nothing out of the ordinary. Every time the MySQL Preference Pane just hangs. I'm doing this on a Macbook Pro (Intel) running OS X 10.6.3. There are no old versions of MySQL on this machine.

    Read the article

  • kernel panic after LVM setup

    - by Manuel Sopena Ballesteros
    I broke my webserver... My setup is: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system This was my previous storage settings (the server was working fine at this time): # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 95G 1.4G 88G 2% / tmpfs 939M 0 939M 0% /dev/shm /dev/sdb1 99G 188M 94G 1% /tmp /dev/sda1 485M 54M 407M 12% /boot My web developer asked me to merge /tmp and / disks so this is what I did: Delete /dev/sdb1 partition using fdisk Create a new partition as LVM on /dev/sdb1 using fdisk Create a new physical volume -- pvcreate /dev/sdb1 Extend volume group -- vgextend /dev/sdb1 vg_test01 Extend logical volume -- lvextend -l +100%FREE /dev/vg_test01/lv_root Resize filesystem -- resize2fs /dev/vg_test01/lv_root This is the new configuration: # df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_test01-lv_root 213G 105G 97G 52% / tmpfs 939M 0 939M 0% /dev/shm /dev/sda1 485M 54M 407M 12% /boot /usr/tmpDSK 4.0G 145M 3.6G 4% /tmp Since I have the new settings my web server is throwing kernel panics quite often (around every 2 days). The message says: INFO: task <taskName>:<pid> blocked for more than 120 seconds. The list of process affected that I can see from the console are: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd The only way I can fix this is reseting (cold reboot) the VM. I don't think it is a hardware issue as sar is not showing any bottleneck: Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 07:50:01 AM all 1.13 0.02 0.55 0.11 0.00 98.19 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to bring the website up again. I would appreciate any help/assistance to fix this issue. thank you very much

    Read the article

  • Centos Xen resizing DomU partition and volume group

    - by thepearson
    I have a setup like so: Dom0 LV | DomU Physical Disk | | XVDA1 XVDA2 (/boot) (DomU PV) | VolGroup00 (DomU VG) | | LogVol00 LogVol01 (swap) (/) I am trying to resize the DomU root Filesystem. (VolGroup00-LogVol01) I realize that I now need to resize the partition XVDA2, however when I try doing this with parted on Dom0 it just tells me "Error: Could not detect file system." So to resize the root part VolGroup-LogVol00 shouldn't the process be: # Shut down DomU xm shutdown domU #Resize Dom0 Logical volume lvextend -L+2G /dev/volumes/domU-vol # Parted parted /dev/volumes/domU-vol # Resize root partition resize 2 START END (This is where I get an error) "Error: Could not detect file system." # add the vm volume group to Dom0 lvm kpartx -a /dev/volumes/domU-vol # resize the domU PV pvresize /dev/mapper/domU-pl (as listed in pvdisplay) # The domU volume group should automatically adjust # resize the DomU lv lvextend -L+2G /dev/VolGroup/LogVol00 And then obviously increase the fs, remove the device from kpartx etc The problem is I dont know how to resize the partition? How do I resize this partition so I can run pvresize on the DomU? Thanks

    Read the article

  • How can I limit my data usage over tethering on Windows?

    - by Casebash
    The excess data charges if I go over my tethering data limit are ridiculously. Fennec already stated the question well. Because of this, and on general principle, I'd like to have some tools which permit me to do things like: Monitor the amount of bandwidth that I've used I think I can do this from Sprint too, but on-the-computer is nice too on-the-computer gives me a possibility of breaking it down by application See what sort of programs are using the Internet connection I could use, like, Wireshark, but that's a bit too micro-level to be practical Keep those programs, and the operating system, from doing things like "downloading an operating system update" while on the mobile hotspot Related I want to monitor and limit OS X's data transfer while I'm tethering via my iPhone

    Read the article

  • Does the Win XP/7 dual boot "missing restore points" problem apply to systems with separate hard disks for each O/S?

    - by Robert Oschler
    I'm in the process of installing Windows 7/64 on a system with Windows XP/32 on it. During my research, I read about a problem that occurs in the dual boot scenario where Windows XP deletes Windows 7's restore points when it accesses the Windows 7 volume: http://support.microsoft.com/kb/926185 I found a workaround but it seems pretty painful since it appears to involve using the registry to make the Windows 7 volume appear invisible or "offline" to Windows XP, making sharing disk data between the two O/S annoying since you have to use something like an external storage device to get it done: http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html I was wondering if this problem only occurs with systems that have both O/S installed on the same physical hard drive (in different partitions)? In my case, I will have each O/S on a completely separate physical hard drive. Any other tips would be appreciated. -- roschler

    Read the article

  • "You need to confirm this operation" message when trying to delete a file

    - by Richard West
    I'm trying to delete a few files that I created, and I have full permissions on, on a Windows 2008 system. The files are within a folder that I created so they are not system files of any kind. The message box that pops up when I try to delete the file is titled "Destination Folder Access Denied", and the message is "you need to confirm this operation", with a continue, skip or cancel button. I disabled UAC and rebooted to see if this would make the message go away -- it did not. However, with UAC disabled I am able to click on continue and the files are deleted. With UAC enabled I had to provide elevated credientials before the files would delete. What causes this behaviour and how can I remove it?

    Read the article

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >