Search Results

Search found 16801 results on 673 pages for 'task manager'.

Page 551/673 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• RTL8188CE doesn't connect to any wifi access points

  - by Drakmail

  I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

  Read the article

• Distributing Microsoft Office Template or Macro over the network

  - by zfranciscus

  We have around 400 users who use Word and we want to make their life easier by distributing templates and macros over the network. The easiest way to do this of course to setup a shared network folder and let them get the appropriate templates and macros. Of course, each user has to know where to copy these files to in their local PC, and we have to rely on constant email communication to let them know for newer version of the macro and templates. The next alternative is to ask them to configure Word to point to these network folder. But of course any disruption to the network means disruption to their work. We are thinking to setup a synchronization mechanism that downloads new templates to their local machine. We are also thinking to make this sync tool to prompt users that it will download new templates - you know just to give them visibility that they are receiving changes. We are wondering what is the best approach that people usually use in their workplaces ? Are there any specific tool that can make this task easier ?

  Read the article

• How do people type different languages into computer?

  - by pecker

  Hello, We have English keyboards. I never saw any other keyboard in my life. I've been wondering for a long time. How do people in Korea, China, Russia, Muslim countries and some European countries where English is less known. Do they have keyboards in their native language? I mean are the keyboard directly manufactured in their native language. Or do they use some kind of keyboard mapping softwares to acheive the task. I've been searching in Google images to have a glance at their computers but didn't find any real key pads for computers/smartphones. If they have some non-English keyboard. Then how would they type web URLs? URLs possible in other languages also? If they have to type English URLs then it also means that they need to know English. I've seen in some movies that they have all their softwares, windows have text in their native language. How do they have some different language? I feel lost & confused. If you have any screenshots / pics of such non-english computer please post. I want to see one.

  Read the article

• Arduino IDE "launch 4j" error

  - by John

  I have a computer running Windows XP. I am trying to run the Arduino IDE 0022. I double-click on arduino.exe, it waits about 30 seconds on the load up title screen, and then it gives me this error: Launch 4j: an error occurred while starting the application My only choice is to click "OK"; the error goes away, and the Arduino IDE closes. If I try to delete the Arduino files (to try overwriting with some different files), I get an error that doesn't allow me to do so: Cannot delete awt.dll: Access denied Make sure the disk is not full or write protected and that the file is not currently in use. The only way to delete the file is by restarting the computer. So something must still be trying to run after that first error. I have noticed in Task Manager that some Java programs are still running: javaw.exe (3 processes) I think this is a problem with Java, but I checked and updated all of my Java software and it is all up to date. I have looked on other forums for this issue and none of them seemed to help. From the forums I have tried: Different Arduino IDE versions Updating Java Opening arduino.exe as Administrator Nothing has worked. Anyone have any suggestions?

  Read the article

• Screen randomly goes blue/black/white

  - by FubsyGamer

  Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

  Read the article

• How to track things that SHOULD happen, but might not have

  - by Kamiel Wanrooij

  I am running into a couple of issues with some applications we've deployed and maintain. I have the feeling we have approached this with some anti-patterns up to now, but I would like to see how to make this more flexible and stable. In one situation, we have a server at a client which pushes data to us to parse every night (yes, Windows Task Scheduler). This is highly unstable however, so once every month this doesn't happen because of reasons out of our control. This heavily impacts our business since we run with stale data in that situation. In another scenario we have a lot of background job processes that should be running. We already keep them up using bluepill ( http://www.github.com/arya/bluepill ) but obviously restarts happen, both automatically and manually, and people forget things or systems mess up. What I would like to track is events that should occur or should be available. Like the existence of a process, the execution of a program, or the creation/age of a file, and track it when they don't happen or exist. We develop most things in Ruby on Rails, use NewRelic, Bluepill and Munin, and run on Ubuntu. I've been toying around with counting ps aux | grep processname | wc -l in Munin scripts, or capturing the age of a file and raising alerts over 24-26 hours, stuff like that. Is there better tooling to track things that should happen, and raise alerts if they don't? P.S. I know some things are suboptimal, like manually having to define bluepill for applications and then forgetting to do so. The same goes for the push based approach of the first application, a dedicated daemon that manages that on the client side that we control and can track its connection to us might be a much better solution.

  Read the article

• How to redirect or rewrite IIS site with port in URL to URL without port?

  - by user2573690

  I'm not 100% sure if this is the right part of StackOverflow to post this but to me it made the most sense. Sorry if its not! Currently I have a site in IIS configured on HTTPS with port 7500. I can access this site by using the URL: https://portal.company.com:7500. What I would like to do is remove the port number at the end of the URL so users can access this site using https://portal.company.com... I am a complete beginner with IIS, but what I have tried is the HTTP Redirect, which if I used on this IIS site, would redirect a user that hits portal.company.com:7500 to some other site, which is not what I need. Another thing I have though about is creating another IIS site which serves the purpose of being at the URL portal.company.com and when its hit, it redirects to my portal.company.com:7500, but I don't know if this is the best approach. So my question is, what are my options for achieving the behavior mentioned above and what is the best/recommended approach? I haven't played with URL Rewriting before but I will look into that now while I wait for a reply. Thanks!! Using IIS Manager on a Windows Server 2008 machine.

  Read the article

• What is the best hosting option for Flash web-widget?

  - by par

  Our Flash web-widget has got highly popular. It is downloaded around 100,000 times per day. And that is the problem. Our server bandwidth is too narrow to deliver the widget to the clients fast. The widget is loaded very slow. Probably 20 times slower than before (at peak times). Probably I have choosen not the right hoster for my task - delivering 1 MB Flash widget to 100,000 users per day. What is the best hosting solution in my case? I'm not good at server administration so forgive me if I sound naive. The details are the following. Our hoster options: -Dedicated server, Ubuntu -10 Mbit Connection -monthly bandwidth limit: 2000 GB Widget size is 1 MB. The widget consists of the main SWF and a number of loaded SWF and data files. This is a part of Apache Status report taken right now ---- Server uptime: 1 hour 2 minutes 38 seconds Total accesses: 74865 - Total Traffic: 5.8 GB CPU Usage: u28 s7.78 cu0 cs0 - .952% CPU load 19.9 requests/sec - 1.6 MB/second - 81.1 kB/request 200 requests currently being processed, 0 idle workers WWWWWWWWWWWWWWWWWWWWWWWWCWWWWWWWWWWWWWWWWWWWWWWWWWWCWWWWWWWCWWWW WWWWWCWWWWWWWWWWWWWWCWWWWWWWWWWWWCWWWWWWWWCWWCWWWWWWWWWWWWWWWWWW WWWWWWWWWWWWWWWWCWWWWWWWWWWWWWWWWWWWWWWWWWWWCWCWWWWWWWWWWWWWWWCW WWWWWWWW........................................................ ----

  Read the article

• Recovery disk Windows 8 HP Pavilion g6

  - by fpghost

  I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• How do I find the Serial Number of a USB Drive?

  - by jamuraa

  I'm trying to re-enable USB Autoplay in a secure way, by installing a program on each of the computers that I use so that I can run my launcher (PStart in this case) whenever I plug in my specific USB drive. The tool that I'm using to enable this - AutoRunGuard - needs the serial number of the USB drive that I am using. I can't figure out where to find this in Windows. Ideally I would not need to install and run a separate program to do this (seemingly) simple task. Since this is a pretty easy question, bonus points if you also tell me how to discover it in Linux as well. What steps do I need to take to retrieve a USB Drive's serial number? UPDATE: Just incase people come here looking for the answer for AutoRunGuard, I discovered that they don't want the USB device serial number, but the volume serial number. The drive serial can be found by going into the command line, navigating to the drive, and executing dir. The volume serial number is found in the top two lines - use it without the dash.

  Read the article

• How do you permanently disable the 'This Connection is Untrusted' page on Firefox

  - by TheIronChef9

  I'm going insane. Can someone please help me to COMPLETELY DISABLE the 'This Connection is Untrusted' page on Firefox. Facts: I am running Firefox 23.0 on an Ubuntu machine (downloaded and installed ubuntu today) It is a work computer and I have to use my employer's proxy While visiting Webpages/webapps like Gmail or Google brings up the 'This Connection is Untrusted' page and I have to go through the whole tedious task of selecting 'I understand the Risks' and add Exceptions, etc. etc. The fact is, I don't care about the risks. I would rather this computer melt into the ground than have to see that page ever again. I want to dance naked in untrusted pages and not give a damn about the consequences. I just never want to see that page again. Ever. For some sites (eg. wikipedia), the css doesn't load and I end up seeing them in plain text. As a result these sites are completely useless. Wasted hours trying to solve this for stackoverflow.com. These issues happen on the Firefox on my Windows XP machine as well (also using the same proxy). I don't want to export/import certificates or create exceptions for every site that shows this bloody page. I just want this page gone. I don't want Firefox to tell me what's safe and what's not. Also, my system time and date are correct. I've also tried the lies on this page too with no good results. Edit: I've also tried the whole going into the Advance-Certificates-validation setup page and unchecked 'Use the Online Certificate Status Protocol (OCSP) to confirm the current validity of certificates' checkbox. Nothing happened even after restarting firefox or rebooting. I need help. Thanks.

  Read the article

• screen scraper templates for various websites

  - by intuited

  I'm looking specifically for a convenient way to locally archive posts from this and other similar sites. I'd like to separate the question itself from the answers, or maybe crop the question and store it, keeping the page title. Obviously I don't need to store the menu or the various other site interface chrome. The best way to do this would seem to be to associate an XSLT template with a match on the URL and use that template to pull the various relevant informations and format them. My two-part question: Is there a tool specifically built for this task? I.E. something that takes a URL and checks it against a map of path-matching expressions to templates, and outputs the result of applying the template to that resource? xmlto seems to be most of the way there, and could probably just be called from a script that does the pattern-matching, but something already integrated would be more convenient. Is such a URL_pattern-to-XSLT_template map publicly available somewhere? Question 2.5: Is it legal to do this with sites like this one that have public licenses on their content?

  Read the article

• Scripted redirection for Outlook 2003

  - by John Gardeniers

  We have a staff member in sales who has gone onto a 4 day week (getting ready for retirement), so each Thursday afternoon her email needs to be forwarded to another user and each Friday afternoon it needs to be set back. I'm using the VBS script below to do this, run via the Task Scheduler. Although the script appears to do it's job, based on what I see when I view the user's Exchange settings, Exchange doesn't always recognise that the setting has changed. e.g. Last Thursday the forwarding was a enabled and worked correctly. On Friday the script did it's thing to clear the forwarding but Exchange continued to forward messages all weekend. I found that I can force Exchange to honour the changed setting be merely opening and closing the user's properties in ADUC. Of course I don't want to have to do that. Is there a non-manual way I can have Exchange read and honour the setting? The script (VBS): ' Call this script with the following parameters: ' ' SrcUser - The logon ID of the suer who's account is to be modified ' DstUser - The logon account of the person to who mail is to be forwarded ' Use "reset" to clear the email forwarding SrcUser = WScript.Arguments.Item(0) DstUser = WScript.Arguments.Item(1) SourceUser = SearchDistinguishedName(SrcUser) 'The user login name Set objUser = GetObject("LDAP://" & SourceUser) If DstUser = "reset" then objUser.PutEx 1, "altRecipient", "" Else ForwardTo = SearchDistinguishedName(DstUser)' The contact common name objUser.Put "AltRecipient", ForwardTo End If objUser.SetInfo Public Function SearchDistinguishedName(ByVal vSAN) Dim oRootDSE, oConnection, oCommand, oRecordSet Set oRootDSE = GetObject("LDAP://rootDSE") Set oConnection = CreateObject("ADODB.Connection") oConnection.Open "Provider=ADsDSOObject;" Set oCommand = CreateObject("ADODB.Command") oCommand.ActiveConnection = oConnection oCommand.CommandText = "<LDAP://" & oRootDSE.get("defaultNamingContext") & ">;(&(objectCategory=User)(samAccountName=" & vSAN & "));distinguishedName;subtree" Set oRecordSet = oCommand.Execute On Error Resume Next SearchDistinguishedName = oRecordSet.Fields("DistinguishedName") On Error GoTo 0 oConnection.Close Set oRecordSet = Nothing Set oCommand = Nothing Set oConnection = Nothing Set oRootDSE = Nothing End Function

  Read the article

• How to backup virtual machines on a standalone ESXi host?

  - by Massimo

  Standalone ESXi (4.1) host without any vCenter Server. How to backup virtual machines as quickly and storage-friendly as possible? I know I can access the ESXi console and use the standard Unix cp command, but this has the downfall of copying the whole VMDK files, not only their actually used space; so, for a 30-GB VMDK of which only 1 GB is used, the backup would take 30 full GBs of space, and time accordingly. And yes, I know about thin-provisioned virtual disks, but they tend to behave very badly when physically copied, and/or to blow up to their full provisioned size; also, they are not recommended for actual VM performance. It is ok for me to shut down the VMs before backing them up (i.e. I don't need "live" backups); but I need a way to copy them around efficiently; and yes, a way to automate shutdown/startup when taking a backup would also help. I only have ESXi; no Service Console, no vCenter Server... what's the best way to handle this task? Also, what about restores?

  Read the article

• Should I be able to Windows Phone 8 emulator running with this AMD config

  - by pete

  I have just bought a new system as follows * AMD A4-5300 Trinity 3.4GHz * Gigabyte GA-F2A55M-DS2 Motherboard I checked and the A4-5300 supports Virtualisation. I have run the SLAT checking tool and it says that my machine supports SLAT. Been into the BIOS and ensures that SVN is enabled. I have also run the coreinfo tool that indicates that SVN is not valid fort the machine nor is NPT.. not sure why this conflicts with the true BIOS setting (I checked with GIGABYTE and seems that NPT and NX are not options that can be set in the BIOS) But.. when I run the emulator I it hangs - I can see some activity in Hyper-V manager, but it doesnt get very far and no meaningfull error messages. Been working the plethora of suggestions to get around this, but so far, nothing has worked. My question is should this setup allow the WP8 emulator to run. I am positive the CPU supports virtualisation, but are there issues with the motherboard here? I have spent a huge amount of time on this so far....am I wasting my time with the current configuration, or should it work? thanks

  Read the article

• Driver corruption when deploying Dell Touchpad Drivers (with software) during imaging process

  - by BigHomie

  We're an sccm shop, and use it to deploy Windows. When deploying Dell laptops (multiple models), the touchpad drivers seem install properly, but the software doesn't. The resulting problem is that when the touchpad is pressed on occasion, the mouse pointer will 'jump' to certain points on the screen. A possible symptom of this problem/visible sign is if the touchpad icon isn't in the system tray. The software is in the control panel, but when opened part of the gui is pixelated, indicating botched install maybe? The manual resolution to this, is to go into device manager and uninstall the driver with the option to uninstall all driver software. After a restart, the driver and software is apparently reinstalled, and from there works as expected. Obviously this partially defeats the purpose of a zero touch deployment. If anyone knows why this is and/or a possible workaround, those answers would be valid as well. Barring that, I want to find a way to deploy the driver and touchpad software in an unattended way, so that it can be conditionally installing during the imaging process. To be honest I'm not sure how to troubleshoot this, I suppose I could try drvinst.exe to install the driver, but finding out why this fails initially would keep me from spinning my wheels.

  Read the article

• New AD user request form and workflow

  - by user66390

  I'm wondering if anyone is providing a solid solution for creating New Network User Account Request forms, and attaching workflows to them to automate account creation? I'm currently investigating a number of options, but am surprised that such a ubiquitous task hasn't been solved a dozen times over and thoroughly documented. Or at least isn't integrated into current off-the-shelf change management and ticketing systems. Ideally, I'd like for our current ticketing system, ServiceDesk+ to present a standard 'New User' form to department heads, which they can fill in with the required new user details. This triggers a workflow that submits the request as a ticket that can be reviewed and actioned. Actioning the ticket triggers a workflow that creates a user in AD with the details provided, and notifies the department head upon completion. All told, a pretty standard requirement that I'm sure most organizations have. What are other people doing to accomplish this? Edit: I should add, I'm more looking for "supported" methods. As is, I've submitted a number of scripted solutions, none of which have met with manager approval.

  Read the article

• Removing HttpModule for specific path in ASP.NET / IIS 7 application?

  - by soccerdad

  Most succinctly, my question is whether an ASP.NET 4.0 app running under IIS 7 integrated mode should be able to honor this portion of my Web.config file: <location path="auth/windows"> <system.webServer> <modules> <remove name="FormsAuthentication"/> </modules> </system.webServer> </location> I'm experimenting with mixed mode authentication (Windows and Forms). Using IIS Manager, I've disabled Anonymous authentication to auth/windows/winauth.aspx, which is within the location path above. I have Failed Request Tracing set up to trace various HTTP status codes, including 302s. When I request the winauth.aspx page, a 302 HTTP status code is returned. If I look at the request trace, I can see that a 401 (unauthorized) was originally generated by the AnonymousAuthenticationModule. However, the FormsAuthenticationModule converts that to a 302, which is what the browser sees. So it seems as though my attempt to remove that module from the pipeline for pages in that path isn't working. But I'm not seeing any complaints anywhere (event viewer, yellow pages of death, etc.) that would indicate it's an invalid configuration. I want the 401 returned to the browser, which presumably would include an appropriate WWW-Authenticate header. A few other points: a) I do have <authentication mode="Forms"> in my Web.config, and that is what the 302 redirects to; b) I got the "name" of the module I'm trying to remove from the inetserv\config\applicationHost.config file; c) I have this element in my Web.config file: <modules runAllManagedModulesForAllRequests="false">; d) I tried a <location> element for the path in which I set the authentication mode to "None", but that gave a yellow exception page that the property can't be set below the application level. Anyone had any luck removing modules in this fashion?

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• Identifying Exchange 2010 regular process that is walking the mailbox database

  - by toongeneral

  I have an Exchange 2010 server running on a SAN-backed platform. The platform does block-level backups based on a snapshot/incremental basis, that only capture changed data. I was surprised to see a regular period of time where the data changes were happening at a high, sustained rate. Due to the way this system works, that can lead to 1.2TB of stored data per month. The regularity implied a scheduled task, but it is not a fixed interval. It is approximately every 26-32hrs. The disks were performing read operations of ~5MB/s and write operations of ~4.5MB/s, for a period of 3-4hrs. The total written data was ~55-60GB. Reading on TechNet, I am wondering if the following is causing this: http://blogs.technet.com/b/exchange/archive/2011/12/14/database-maintenance-in-exchange-2010.aspx#checksumming The somewhat restrictive thing is that the process only happens at most once every 24 hours. I was able to investigate while it was running, finding the following: the process is store.exe it is working on the mailbox database files while running, it is generating .log files (in the mailbox database folder) consistent with database changes the mailbox database is ~60GB in size, which fits with the total data changes on each iteration I have currently switched to a fixed maintenance window, as a test. It's not clear whether this is the cause, as the symptoms fit, but are not conclusive. Does anyone have any suggestions for additional troubleshooting?

  Read the article

• visually documenting web server configuration and infrastructure

  - by Alex Ciarlillo

  I have just finished a large re-organization and update of our institutions web server(s). This server hosts 3 virtual hosts, 3-4 blogs, 2 wikis, some legacy static HTML pages, and many hosted documents (PDF, .jpg, .xls). I have organized the site into a structure of something like: /var/www/sites/vhost1, vhost2, vhost3 .../wordpress/blogX .../mediawiki/wikiX Data is in a seperate directory structure so I can run a cron task over it to make sure it is all writeable and such. I then symlink to these data directories for each application. /var/www/data/vhost1, vhost2, vhost3 .../wordpress/blogX/uploads .../mediawiki/wikiX/images All Apache configs are in /etc/httpd/conf.d/vhosts.d/vhost1,2,3.conf On top of this there is also a testing server which mirrors this setup. Once changes are fully tested, they are rsynced down to the live server. All the wordpress installs and mediawiki installs are straight form SVN and updates are done by switching branches or "svn up". So my question is how can I best document to share with a) co-workers, b) possible future replacement, c) myself 6 months from now. Obviously I can make a wiki page, excel document, whatever and fill it with text, but I am looking for a more visual representation that I can use to explain the architecture to less-technical people. Ideally it would be awesome if this visual representation could then be expanded to get more technical details.

  Read the article

• Configuring SQL Server Express 2005

  - by MrTognio

  What's the proper way to configure SQL Server Express 2005 so that it can allow for a number of clients to get connected to the server? I have my application running both in the server machine and the client machines. Given the nature of my application, clients are the branches geographically distant from each other, and the server itself. Every operation the client records must be reported to the server, because the server needs total control over the usage and production. But, what should I consider when configuring the connection in both sides, the server and the client? I'm not as used to SQL Server, I'm a beginner, however through SQL Server Configuration Manager I have set the main options without success. The problem seems to be related to trusted connections even though I have set it to support both windows and SQL Server authentication. When the client tries to connect to the server using windows authentication it displays no table; when it tries to communicate using a password (SQL Server authentication), tables are successfully displayed but no access is allowed... Thanx in advance!

  Read the article

• Disable Windows 7 taskbar grouping. Not combining.

  - by Byran

  I've look near and far but I cannot find a way (setting or hack) to prevent Windows 7 from grouping taskbar buttons together that are "related". I'm not talking about the option to combine or collapse related buttons into one item. I can find that setting at: Taskbar and Start Menu Properties Taskbar Taskbar buttons: This is what I an not looking for: How to Enable or Disable Windows 7 Taskbar Button Grouping I'm talking about how Windows 7 seams to think that it's doing me a favor by grouping all my Google Chrome buttons together and grouping all my Explorer buttons together etc. My workflow in Windows XP was to use the program Taskbar Shuffle to allow me to reorganize my taskbar buttons into related task "groups" I was working on. For example: [Start Button] | [iTunes] [Outlook Express] [Chrome Gmail] [layered design folder] [Photoshop CS4] [exported images folder] [website root folder] [Dreamweaver CS4] [Chrome www.MyAwesomeWebsiteImBuilding.com] [Chrome Recent web search] [some unrelated folder] Windows 7 doesn't seem to let me do this. It wants to do: [Start Button] | [layered design folder][exported images folder][website root folder][some unrelated folder] | [Chrome www.MyAwesomeWebsiteImBuilding.com]Chrome [Gmail][Chrome Recent web search] | [iTunes] | [Outlook Express] | [Photoshop CS4] | [Dreamweaver CS4] Does anyone know of a tool or hack to prevent Windows 7 from grouping taskbar buttons?

  Read the article

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >