Search Results

Search found 39491 results on 1580 pages for 'insert id'.

Page 552/1580 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• SCCM 2012 unable to update boot images with pxe enabled

  - by Adam

  we are fighting an error in sccm 2012. When we attempt to distribute boot images (after selecting the pxe option) we receive an error that the pxe image cannot be expanded (distmgr log). Can you give us any direction on what to try or attempt in this scenario? We only have one dp in our environment at the moment, however we have found that by creating another dp on a different server we don’t have this problem. However we really need the primary site to be a dp. We have tried: Removing and reinstalling the dp Removing and reinstalling the WDS Reinstalled the OS ... ouch Reinstalled SQL We even attempted to manually mount these wims in the remote install folder, no luck... And we have been working on this for days... Any and all help is appreciated! Our log is below Thank you very much, Small Town IT guy Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) The distribution point is on the siteserver and the package is a content type package. There is nothing to be copied over. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=6924 GMTDATE=Fri Jun 22 19:49:41.559 2012 ISTR0="Boot image (x86)" ISTR1="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="IVC00001" AID1=404 AVAL1="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) The current user context will be used for connecting to ["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) No network connection is needed to ["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\ as this is the local machine. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Signature share exists on distribution point path \OURSERVER.ourdomain.cc.ia.us\SMSSIG$ SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Ignoring drive C:. File C:\NO_SMS_ON_DRIVE.SMS exists. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (OURSERVER.ourdomain.cc.ia.us) is submitting SDK changes from site(IVC) SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Share SMSPKGD$ exists on distribution point \OURSERVER.ourdomain.cc.ia.us\SMSPKGD$ SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Creating, reading and or updating Operations Management server role registry keys for a Distribution Point ... SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (OURSERVER.ourdomain.cc.ia.us) is submitting SDK changes from site(IVC) SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:41 PM 6924 (0x1B0C) Virtual Directory SMS_DP_SMSPKG$ for the physical path F:\SCCMContentLib already exists. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) STATMSG: ID=2375 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=6924 GMTDATE=Fri Jun 22 19:49:42.058 2012 ISTR0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Virtual Directory SMS_DP_SMSSIG$ for the physical path D:\SMSSIG$ already exists. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) STATMSG: ID=2375 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=6924 GMTDATE=Fri Jun 22 19:49:42.105 2012 ISTR0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\OURSERVER.ourdomain.cc.ia.us\"]MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) user(NT AUTHORITY\SYSTEM) runing application(SMS_DISTRIBUTION_MANAGER) from machine (OURSERVER.ourdomain.cc.ia.us) is submitting SDK changes from site(IVC) SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) RDC:Successfully created package signature file from \?\F:\SMSPKGSIG\IVC00001.3 to \OURSERVER.ourdomain.cc.ia.us\SMSSIG$\IVC00001.3.tar SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Setting permissions on file MSWNET:["SMS_SITE=IVC"]\OURSERVER.ourdomain.cc.ia.us\SMSSIG$\IVC00001.3.tar. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) ExpandPXEImage: IVC00001, 1024 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) CContentDefinition::GetFileProperties failed; 0x80070003 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) CContentDefinition::TotalFileSizes failed; 0x80070003 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) ExpandPXEImage failed; 0x80070003 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 6924 (0x1B0C) DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) DP thread with thread handle 00000000000013A4 and thread ID 6924 ended. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Updating package info for package IVC00001 SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Package IVC00001 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) The package and/or program properties for package IVC00001 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) StoredPkgVersion (3) of package IVC00001. StoredPkgVersion in database is 3. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) SourceVersion (3) of package IVC00001. SourceVersion in database is 3. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=OURSERVER.ourdomain.cc.ia.us SITE=IVC PID=3600 TID=4492 GMTDATE=Fri Jun 22 19:49:42.292 2012 ISTR0="Boot image (x86)" ISTR1="IVC00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="IVC00001" SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Failed to process package IVC00001 after 0 retries, will retry 100 more times SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C) Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/22/2012 2:49:42 PM 4492 (0x118C)

  Read the article

• IIS 7 Authentication: Certain users can't authenticate, while almost all others can.

  - by user35335

  I'm using IIS 7 Digest authentication to control access to a certain directory containing files. Users access the files through a department website from inside our network and outside. I've set NTFS permissions on the directory to allow a certain AD group to view the files. When I click a link to one of those files on the website I get prompted for a username and password. With most users everything works fine, but with a few of them it prompts for a password 3 times and then get: 401 - Unauthorized: Access is denied due to invalid credentials. But other users that are in the group can get in without a problem. If I switch it over to Windows Authentication, then the trouble users can log in fine. That directory is also shared, and users that can't log in through the website are able to browse to the share and view files in it, so I know that the permissions are ok. Here's the portion of the IIS log where I tried to download the file (/assets/files/secure/WWGNL.pdf): 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bullet.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:20 xxx.xxx.xxx.xxx GET /assets/images/bgOFF.gif - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 218 2010-02-19 19:47:21 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 2 5 0 2010-02-19 19:47:36 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 0 2010-02-19 19:47:43 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:46 xxx.xxx.xxx.xxx GET /manager/media/script/_session.gif 0.19665693119168282 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 203 2010-02-19 19:47:46 xxx.xxx.xxx.xxx POST /manager/index.php - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 200 0 0 296 2010-02-19 19:47:56 xxx.xxx.xxx.xxx GET /assets/files/secure/WWGNL.pdf - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 401 1 2148074252 15 2010-02-19 19:47:59 xxx.xxx.xxx.xxx GET /favicon.ico - 80 - 10.5.16.138 Mozilla/5.0+(Windows;+U;+Windows+NT+6.1;+en-US)+AppleWebKit/532.5+(KHTML,+like+Gecko)+Chrome/4.0.249.89+Safari/532.5 404 0 2 0 Here's the Failed Logon attempt in the Security Log: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 2/19/2010 11:47:43 AM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: WEB4.net.domain.org Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: jim.lastname Account Domain: net.domain.org Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc000006a Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: 10.5.16.138 Source Port: 50065 Detailed Authentication Information: Logon Process: WDIGEST Authentication Package: WDigest Transited Services: - Package Name (NTLM only): - Key Length: 0 This event is generated when a logon request fails. It is generated on the computer where access was attempted. The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe. The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network). The Process Information fields indicate which account and process on the system requested the logon. The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases. The authentication information fields provide detailed information about this specific logon request. - Transited services indicate which intermediate services have participated in this logon request. - Package name indicates which sub-protocol was used among the NTLM protocols. - Key length indicates the length of the generated session key. This will be 0 if no session key was requested. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-a5ba-3e3b0328c30d}" /> <EventID>4625</EventID> <Version>0</Version> <Level>0</Level> <Task>12544</Task> <Opcode>0</Opcode> <Keywords>0x8010000000000000</Keywords> <TimeCreated SystemTime="2010-02-19T19:47:43.890Z" /> <EventRecordID>2276316</EventRecordID> <Correlation /> <Execution ProcessID="612" ThreadID="692" /> <Channel>Security</Channel> <Computer>WEB4.net.domain.org</Computer> <Security /> </System> <EventData> <Data Name="SubjectUserSid">S-1-0-0</Data> <Data Name="SubjectUserName">-</Data> <Data Name="SubjectDomainName">-</Data> <Data Name="SubjectLogonId">0x0</Data> <Data Name="TargetUserSid">S-1-0-0</Data> <Data Name="TargetUserName">jim.lastname</Data> <Data Name="TargetDomainName">net.domain.org</Data> <Data Name="Status">0xc000006d</Data> <Data Name="FailureReason">%%2313</Data> <Data Name="SubStatus">0xc000006a</Data> <Data Name="LogonType">3</Data> <Data Name="LogonProcessName">WDIGEST</Data> <Data Name="AuthenticationPackageName">WDigest</Data> <Data Name="WorkstationName">-</Data> <Data Name="TransmittedServices">-</Data> <Data Name="LmPackageName">-</Data> <Data Name="KeyLength">0</Data> <Data Name="ProcessId">0x0</Data> <Data Name="ProcessName">-</Data> <Data Name="IpAddress">10.5.16.138</Data> <Data Name="IpPort">50065</Data> </EventData> </Event>

  Read the article

• SUPER CSV write bean to CSV.

  - by ButtersB

  Here is my class, public class FreebasePeopleResults { public String intendedSearch; public String weight; public Double heightMeters; public Integer age; public String type; public String parents; public String profession; public String alias; public String children; public String siblings; public String spouse; public String degree; public String institution; public String wikipediaId; public String guid; public String id; public String gender; public String name; public String ethnicity; public String articleText; public String dob; public String getWeight() { return weight; } public void setWeight(String weight) { this.weight = weight; } public Double getHeightMeters() { return heightMeters; } public void setHeightMeters(Double heightMeters) { this.heightMeters = heightMeters; } public String getParents() { return parents; } public void setParents(String parents) { this.parents = parents; } public Integer getAge() { return age; } public void setAge(Integer age) { this.age = age; } public String getProfession() { return profession; } public void setProfession(String profession) { this.profession = profession; } public String getAlias() { return alias; } public void setAlias(String alias) { this.alias = alias; } public String getChildren() { return children; } public void setChildren(String children) { this.children = children; } public String getSpouse() { return spouse; } public void setSpouse(String spouse) { this.spouse = spouse; } public String getDegree() { return degree; } public void setDegree(String degree) { this.degree = degree; } public String getInstitution() { return institution; } public void setInstitution(String institution) { this.institution = institution; } public String getWikipediaId() { return wikipediaId; } public void setWikipediaId(String wikipediaId) { this.wikipediaId = wikipediaId; } public String getGuid() { return guid; } public void setGuid(String guid) { this.guid = guid; } public String getId() { return id; } public void setId(String id) { this.id = id; } public String getGender() { return gender; } public void setGender(String gender) { this.gender = gender; } public String getName() { return name; } public void setName(String name) { this.name = name; } public String getEthnicity() { return ethnicity; } public void setEthnicity(String ethnicity) { this.ethnicity = ethnicity; } public String getArticleText() { return articleText; } public void setArticleText(String articleText) { this.articleText = articleText; } public String getDob() { return dob; } public void setDob(String dob) { this.dob = dob; } public String getType() { return type; } public void setType(String type) { this.type = type; } public String getSiblings() { return siblings; } public void setSiblings(String siblings) { this.siblings = siblings; } public String getIntendedSearch() { return intendedSearch; } public void setIntendedSearch(String intendedSearch) { this.intendedSearch = intendedSearch; } } Here is my CSV writer method import java.io.FileWriter; import java.io.IOException; import java.util.ArrayList; import org.supercsv.io.CsvBeanWriter; import org.supercsv.prefs.CsvPreference; public class CSVUtils { public static void writeCSVFromList(ArrayList<FreebasePeopleResults> people, boolean writeHeader) throws IOException{ //String[] header = new String []{"title","acronym","globalId","interfaceId","developer","description","publisher","genre","subGenre","platform","esrb","reviewScore","releaseDate","price","cheatArticleId"}; FileWriter file = new FileWriter("/brian/brian/Documents/people-freebase.csv", true); // write the partial data CsvBeanWriter writer = new CsvBeanWriter(file, CsvPreference.EXCEL_PREFERENCE); for(FreebasePeopleResults person:people){ writer.write(person); } writer.close(); // show output } } I keep getting output errors. Here is the error: There is no content to write for line 2 context: Line: 2 Column: 0 Raw line: null Now, I know it is now totally null, so I am confused.

  Read the article

• MvcExtensions – Bootstrapping

  - by kazimanzurrashid

  When you create a new ASP.NET MVC application you will find that the global.asax contains the following lines: namespace MvcApplication1 { // Note: For instructions on enabling IIS6 or IIS7 classic mode, // visit http://go.microsoft.com/?LinkId=9394801 public class MvcApplication : System.Web.HttpApplication { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); } protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } } } As the application grows, there are quite a lot of plumbing code gets into the global.asax which quickly becomes a design smell. Lets take a quick look at the code of one of the open source project that I recently visited: public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute("Default","{controller}/{action}/{id}", new { controller = "Home", action = "Index", id = "" }); } protected override void OnApplicationStarted() { Error += OnError; EndRequest += OnEndRequest; var settings = new SparkSettings() .AddNamespace("System") .AddNamespace("System.Collections.Generic") .AddNamespace("System.Web.Mvc") .AddNamespace("System.Web.Mvc.Html") .AddNamespace("MvcContrib.FluentHtml") .AddNamespace("********") .AddNamespace("********.Web") .SetPageBaseType("ApplicationViewPage") .SetAutomaticEncoding(true); #if DEBUG settings.SetDebug(true); #endif var viewFactory = new SparkViewFactory(settings); ViewEngines.Engines.Add(viewFactory); #if !DEBUG PrecompileViews(viewFactory); #endif RegisterAllControllersIn("********.Web"); log4net.Config.XmlConfigurator.Configure(); RegisterRoutes(RouteTable.Routes); Factory.Load(new Components.WebDependencies()); ModelBinders.Binders.DefaultBinder = new Binders.GenericBinderResolver(Factory.TryGet<IModelBinder>); ValidatorConfiguration.Initialize("********"); HtmlValidationExtensions.Initialize(ValidatorConfiguration.Rules); } private void OnEndRequest(object sender, System.EventArgs e) { if (((HttpApplication)sender).Context.Handler is MvcHandler) { CreateKernel().Get<ISessionSource>().Close(); } } private void OnError(object sender, System.EventArgs e) { CreateKernel().Get<ISessionSource>().Close(); } protected override IKernel CreateKernel() { return Factory.Kernel; } private static void PrecompileViews(SparkViewFactory viewFactory) { var batch = new SparkBatchDescriptor(); batch.For<HomeController>().For<ManageController>(); viewFactory.Precompile(batch); } As you can see there are quite a few of things going on in the above code, Registering the ViewEngine, Compiling the Views, Registering the Routes/Controllers/Model Binders, Settings up Logger, Validations and as you can imagine the more it becomes complex the more things will get added in the application start. One of the goal of the MVCExtensions is to reduce the above design smell. Instead of writing all the plumbing code in the application start, it contains BootstrapperTask to register individual services. Out of the box, it contains BootstrapperTask to register Controllers, Controller Factory, Action Invoker, Action Filters, Model Binders, Model Metadata/Validation Providers, ValueProvideraFactory, ViewEngines etc and it is intelligent enough to automatically detect the above types and register into the ASP.NET MVC Framework. Other than the built-in tasks you can create your own custom task which will be automatically executed when the application starts. When the BootstrapperTasks are in action you will find the global.asax pretty much clean like the following: public class MvcApplication : UnityMvcApplication { public void ErrorLog_Filtering(object sender, ExceptionFilterEventArgs e) { Check.Argument.IsNotNull(e, "e"); HttpException exception = e.Exception.GetBaseException() as HttpException; if ((exception != null) && (exception.GetHttpCode() == (int)HttpStatusCode.NotFound)) { e.Dismiss(); } } } The above code is taken from my another open source project Shrinkr, as you can see the global.asax is longer cluttered with any plumbing code. One special thing you have noticed that it is inherited from the UnityMvcApplication rather than regular HttpApplication. There are separate version of this class for each IoC Container like NinjectMvcApplication, StructureMapMvcApplication etc. Other than executing the built-in tasks, the Shrinkr also has few custom tasks which gets executed when the application starts. For example, when the application starts, we want to ensure that the default users (which is specified in the web.config) are created. The following is the custom task that is used to create those default users: public class CreateDefaultUsers : BootstrapperTask { protected override TaskContinuation ExecuteCore(IServiceLocator serviceLocator) { IUserRepository userRepository = serviceLocator.GetInstance<IUserRepository>(); IUnitOfWork unitOfWork = serviceLocator.GetInstance<IUnitOfWork>(); IEnumerable<User> users = serviceLocator.GetInstance<Settings>().DefaultUsers; bool shouldCommit = false; foreach (User user in users) { if (userRepository.GetByName(user.Name) == null) { user.AllowApiAccess(ApiSetting.InfiniteLimit); userRepository.Add(user); shouldCommit = true; } } if (shouldCommit) { unitOfWork.Commit(); } return TaskContinuation.Continue; } } There are several other Tasks in the Shrinkr that we are also using which you will find in that project. To create a custom bootstrapping task you have create a new class which either implements the IBootstrapperTask interface or inherits from the abstract BootstrapperTask class, I would recommend to start with the BootstrapperTask as it already has the required code that you have to write in case if you choose the IBootstrapperTask interface. As you can see in the above code we are overriding the ExecuteCore to create the default users, the MVCExtensions is responsible for populating the  ServiceLocator prior calling this method and in this method we are using the service locator to get the dependencies that are required to create the users (I will cover the custom dependencies registration in the next post). Once the users are created, we are returning a special enum, TaskContinuation as the return value, the TaskContinuation can have three values Continue (default), Skip and Break. The reason behind of having this enum is, in some  special cases you might want to skip the next task in the chain or break the complete chain depending upon the currently running task, in those cases you will use the other two values instead of the Continue. The last thing I want to cover in the bootstrapping task is the Order. By default all the built-in tasks as well as newly created task order is set to the DefaultOrder(a static property), in some special cases you might want to execute it before/after all the other tasks, in those cases you will assign the Order in the Task constructor. For Example, in Shrinkr, we want to run few background services when the all the tasks are executed, so we assigned the order as DefaultOrder + 1. Here is the code of that Task: public class ConfigureBackgroundServices : BootstrapperTask { private IEnumerable<IBackgroundService> backgroundServices; public ConfigureBackgroundServices() { Order = DefaultOrder + 1; } protected override TaskContinuation ExecuteCore(IServiceLocator serviceLocator) { backgroundServices = serviceLocator.GetAllInstances<IBackgroundService>().ToList(); backgroundServices.Each(service => service.Start()); return TaskContinuation.Continue; } protected override void DisposeCore() { backgroundServices.Each(service => service.Stop()); } } That’s it for today, in the next post I will cover the custom service registration, so stay tuned.

  Read the article

• Wishful Thinking: Why can't HTML fix Script Attacks at the Source?

  - by Rick Strahl

  The Web can be an evil place, especially if you're a Web Developer blissfully unaware of Cross Site Script Attacks (XSS). Even if you are aware of XSS in all of its insidious forms, it's extremely complex to deal with all the issues if you're taking user input and you're actually allowing users to post raw HTML into an application. I'm dealing with this again today in a Web application where legacy data contains raw HTML that has to be displayed and users ask for the ability to use raw HTML as input for listings. The first line of defense of course is: Just say no to HTML input from users. If you don't allow HTML input directly and use HTML Encoding (HttyUtility.HtmlEncode() in .NET or using standard ASP.NET MVC output @Model.Content) you're fairly safe at least from the HTML input provided. Both WebForms and Razor support HtmlEncoded content, although Razor makes it the default. In Razor the default @ expression syntax:@Model.UserContent automatically produces HTML encoded content - you actually have to go out of your way to create raw HTML content (safe by default) using @Html.Raw() or the HtmlString class. In Web Forms (V4) you can use:<%: Model.UserContent %> or if you're using a version prior to 4.0:<%= HttpUtility.HtmlEncode(Model.UserContent) %> This works great as a hedge against embedded <script> tags and HTML markup as any HTML is turned into text that displays as HTML but doesn't render the HTML. But it turns any embedded HTML markup tags into plain text. If you need to display HTML in raw form with the markup tags rendering based on user input this approach is worthless. If you do accept HTML input and need to echo the rendered HTML input back, the task of cleaning up that HTML is a complex task. In the projects I work on, customers are frequently asking for the ability to post raw HTML quite frequently.  Almost every app that I've built where there's document content from users we start out with text only input - possibly using something like MarkDown - but inevitably users want to just post plain old HTML they created in some other rich editing application. See this a lot with realtors especially who often want to reuse their postings easily in multiple places. In my work this is a common problem I need to deal with and I've tried dozens of different methods from sanitizing, simple rejection of input to custom markup schemes none of which have ever felt comfortable to me. They work in a half assed, hacked together sort of way but I always live in fear of missing something vital which is *really easy to do*. My Wishlist Item: A <restricted> tag in HTML Let me dream here for a second on how to address this problem. It seems to me the easiest place where this can be fixed is: In the browser. Browsers are actually executing script code so they have a lot of control over the script code that resides in a page. What if there was a way to specify that you want to turn off script code for a block of HTML? The main issue when dealing with HTML raw input isn't that we as developers are unaware of the implications of user input, but the fact that we sometimes have to display raw HTML input the user provides. So the problem markup is usually isolated in only a very specific part of the document. So, what if we had a way to specify that in any given HTML block, no script code could execute by wrapping it into a tag that disables all script functionality in the browser? This would include <script> tags and any document script attributes like onclick, onfocus etc. and potentially also disallow things like iFrames that can potentially be scripted from the within the iFrame's target. I'd like to see something along these lines:<article> <restricted allowscripts="no" allowiframes="no"> <div>Some content</div> <script>alert('go ahead make my day, punk!");</script> <div onfocus="$.getJson('http://evilsite.com/')">more content</div> </restricted> </article> A tag like this would basically disallow all script code from firing from any HTML that's rendered within it. You'd use this only on code that you actually render from your data only and only if you are dealing with custom data. So something like this:<article> <restricted> @Html.Raw(Model.UserContent) </restricted> </article> For browsers this would actually be easy to intercept. They render the DOM and control loading and execution of scripts that are loaded through it. All the browser would have to do is suspend execution of <script> tags and not hookup any event handlers defined via markup in this block. Given all the crazy XSS attacks that exist and the prevalence of this problem this would go a long way towards preventing at least coded script attacks in the DOM. And it seems like a totally doable solution that wouldn't be very difficult to implement by vendors. There would also need to be some logic in the parser to not allow an </restricted> or <restricted> tag into the content as to short-circuit the rstricted section (per James Hart's comment). I'm sure there are other issues to consider as well that I didn't think of in my off-the-back-of-a-napkin concept here but the idea overall seems worth consideration I think. Without code running in a user supplied HTML block it'd be pretty hard to compromise a local HTML document and pass information like Cookies to a server. Or even send data to a server period. Short of an iFrame that can access the parent frame (which is another restriction that should be available on this <restricted> tag) that could potentially communicate back, there's not a lot a malicious site could do. The HTML could still 'phone home' via image links and href links potentially and basically say this site was accessed, but without the ability to run script code it would be pretty tough to pass along critical information to the server beyond that. Ahhhh… one can dream… Not holding my breath of course. The design by committee that is the W3C can't agree on anything in timeframes measured less than decades, but maybe this is one place where browser vendors can actually step up the pressure. This is something in their best interest to reduce the attack surface for vulnerabilities on their browser platforms significantly. Several people commented on Twitter today that there isn't enough discussion on issues like this that address serious needs in the web browser space. Realistically security has to be a number one concern with Web applications in general - there isn't a Web app out there that is not vulnerable. And yet nothing has been done to address these security issues even though there might be relatively easy solutions to make this happen. It'll take time, and it's probably not going to happen in our lifetime, but maybe this rambling thought sparks some ideas on how this sort of restriction can get into browsers in some way in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET  HTML5  HTML  Security   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Make your CHM Help Files show HTML5 and CSS3 content

  - by Rick Strahl

  The HTML Help 1.0 specification aka CHM files, is pretty old. In fact, it's practically ancient as it was introduced in 1997 when Internet Explorer 4 was introduced. Html Help 1.0 is basically a completely HTML based Help system that uses a Help Viewer that internally uses Internet Explorer to render the HTML Help content. Because of its use of the Internet Explorer shell for rendering there were many security issues in the past, which resulted in locking down of the Web Browser control in Windows and also the Help Engine which caused some unfortunate side effects. Even so, CHM continues to be a popular help format because it is very easy to produce content for it, using plain HTML and because it works with many Windows application platforms out of the box. While there have been various attempts to replace CHM help files CHM files still seem to be a popular choice for many applications to display their help systems. The biggest alternative these days is no system based help at all, but links to online documentation. For Windows apps though it's still very common to see CHM help files and there are still a ton of CHM help out there and lots of tools (including our own West Wind Html Help Builder) that produce output for CHM files as well as Web output. Image is Everything and you ain't got it! One problem with the CHM engine is that it's stuck with an ancient Internet Explorer version for rendering. For example if you have help content that uses HTML5 or CSS3 content you might have an HTML Help topic like the following shown here in a full Web Browser instance of Internet Explorer: The page clearly uses some CSS3 features like rounded corners and box shadows that are rendered using plain CSS 3 features. Note that I used Internet Explorer on purpose here to demonstrate that IE9 on Windows 7 can properly render this content using some of the new features of CSS, but the same is true for all other recent versions of the major browsers (FireFox 3.1+, Safari 4.5+, WebKit 9+ etc.). Unfortunately if you take this nice and simple CSS3 content and run it through the HTML Help compiler to produce a CHM file the resulting output on the same machine looks a bit less flashy: All the CSS3 styling is gone and although the page display and functionality still works, but all the extra styling features are gone. This even though I am running this on a Windows 7 machine that has IE9 that should be able to render these CSS features. Bummer. Web Browser Control - perpetually stuck in IE 7 Mode The problem is the Web Browser/Shell Components in Windows. This component is and has been part of Windows for as long as Internet Explorer has been around, but the Web Browser control hasn't kept up with the latest versions of IE. In a nutshell the control is stuck in IE7 rendering mode for engine compatibility reasons by default. However, there is at least one way to fix this explicitly using Registry keys on a per application basis. The key point from that blog article is that you can override the IE rendering engine for a particular executable by setting one (or more) registry flags that tell the Windows Shell which version of the Internet Explorer rendering engine to load. An application that wishes to use a more recent version of Internet Explorer can then register itself during installation for the specific IE version desired and from then on the application will use that version of the Web Browser component. If the application is older than the specified version it falls back to the default version (IE 7 rendering). Forcing CHM files to display with IE9 (or later) Rendering Knowing that we can force the IE usage for a given process it's also possible to affect the CHM rendering by setting same keys on the executable that's hosting the CHM file. What that executable file is depends on the type of application as there are a number of ways that can launch the help engine. hh.exeThe standalone Windows CHM Help Viewer that launches when you launch a CHM from Windows Explorer. You can manually add hh.exe to the registry keys. YourApplication.exeIf you're using .NET or any tool that internally uses the hhControl ActiveX control to launch help content your application is your host. You should add your application's exe to the registry during application startup. foxhhelp9.exeIf you're building a FoxPro application that uses the built-in help features, foxhhelp9.exe is used to actually host the help controls. Make sure to add this executable to the registry. What to set You can configure the Internet Explorer version used for an application in the registry by specifying the executable file name and a value that specifies the IE version desired. There are two different sets of keys for 32 bit and 64 bit applications. 32 bit only or 64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe 32 bit on 64 bit machine: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\MAIN\FeatureControl\FEATURE_BROWSER_EMULATION Value Key: hh.exe Note that it's best to always set both values ideally when you install your application so it works regardless of which platform you run on. The value specified is a DWORD value and the interesting values are decimal 9000 for IE9 rendering mode depending on !DOCTYPE settings or 9999 for IE 9 standards mode always. You can use the same logic for 8000 and 8888 for IE8 and the final value of 7000 for IE7 (one has to wonder what they're going todo for version 10 to perpetuate that pattern). I think 9000 is the value you'd most likely want to use. 9000 means that IE9 will be used for rendering but unless the right doctypes are used (XHTML and HTML5 specifically) IE will still fall back into quirks mode as needed. This should allow existing pages to continue to use the fallback engine while new pages that have the proper HTML doctype set can take advantage of the newest features. Here's an example of how I set the registry keys in my Tarma Installmate registry configuration: Note that I set all three values both under the Software and Wow6432Node keys so that this works regardless of where these EXEs are launched from. Even though all apps are 32 bit apps, the 64 bit (the default one shown selected) key is often used. So, now once I've set the registry key for hh.exe I can now launch my CHM help file from Explorer and see the following CSS3 IE9 rendered display: Summary It sucks that we have to go through all these hoops to get what should be natural behavior for an application to support the latest features available on a system. But it shouldn't be a surprise - the Windows Help team (if there even is such a thing) has not been known for forward looking technologies. It's a pretty big hassle that we have to resort to setting registry keys in order to get the Web Browser control and the internal CHM engine to render itself properly but at least it's possible to make it work after all. Using this technique it's possible to ship an application with a help file and allow your CHM help to display with richer CSS markup and correct rendering using the stricter and more consistent XHTML or HTML5 doctypes. If you provide both Web help and in-application help (and why not if you're building from a single source) you now can side step the issue of your customers asking: Why does my help file look so much shittier than the online help… No more!© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  Help  Html Help Builder  Internet Explorer  Windows   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Dynamic Types and DynamicObject References in C#

  - by Rick Strahl

  I've been working a bit with C# custom dynamic types for several customers recently and I've seen some confusion in understanding how dynamic types are referenced. This discussion specifically centers around types that implement IDynamicMetaObjectProvider or subclass from DynamicObject as opposed to arbitrary type casts of standard .NET types. IDynamicMetaObjectProvider types  are treated special when they are cast to the dynamic type. Assume for a second that I've created my own implementation of a custom dynamic type called DynamicFoo which is about as simple of a dynamic class that I can think of:public class DynamicFoo : DynamicObject { Dictionary<string, object> properties = new Dictionary<string, object>(); public string Bar { get; set; } public DateTime Entered { get; set; } public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; if (!properties.ContainsKey(binder.Name)) return false; result = properties[binder.Name]; return true; } public override bool TrySetMember(SetMemberBinder binder, object value) { properties[binder.Name] = value; return true; } } This class has an internal dictionary member and I'm exposing this dictionary member through a dynamic by implementing DynamicObject. This implementation exposes the properties dictionary so the dictionary keys can be referenced like properties (foo.NewProperty = "Cool!"). I override TryGetMember() and TrySetMember() which are fired at runtime every time you access a 'property' on a dynamic instance of this DynamicFoo type. Strong Typing and Dynamic Casting I now can instantiate and use DynamicFoo in a couple of different ways: Strong TypingDynamicFoo fooExplicit = new DynamicFoo(); var fooVar = new DynamicFoo(); These two commands are essentially identical and use strong typing. The compiler generates identical code for both of them. The var statement is merely a compiler directive to infer the type of fooVar at compile time and so the type of fooExplicit is DynamicFoo, just like fooExplicit. This is very static - nothing dynamic about it - and it completely ignores the IDynamicMetaObjectProvider implementation of my class above as it's never used. Using either of these I can access the native properties:DynamicFoo fooExplicit = new DynamicFoo();// static typing assignmentsfooVar.Bar = "Barred!"; fooExplicit.Entered = DateTime.Now; // echo back static values Console.WriteLine(fooVar.Bar); Console.WriteLine(fooExplicit.Entered); but I have no access whatsoever to the properties dictionary. Basically this creates a strongly typed instance of the type with access only to the strongly typed interface. You get no dynamic behavior at all. The IDynamicMetaObjectProvider features don't kick in until you cast the type to dynamic. If I try to access a non-existing property on fooExplicit I get a compilation error that tells me that the property doesn't exist. Again, it's clearly and utterly non-dynamic. Dynamicdynamic fooDynamic = new DynamicFoo(); fooDynamic on the other hand is created as a dynamic type and it's a completely different beast. I can also create a dynamic by simply casting any type to dynamic like this:DynamicFoo fooExplicit = new DynamicFoo(); dynamic fooDynamic = fooExplicit; Note that dynamic typically doesn't require an explicit cast as the compiler automatically performs the cast so there's no need to use as dynamic. Dynamic functionality works at runtime and allows for the dynamic wrapper to look up and call members dynamically. A dynamic type will look for members to access or call in two places: Using the strongly typed members of the object Using theIDynamicMetaObjectProvider Interface methods to access members So rather than statically linking and calling a method or retrieving a property, the dynamic type looks up - at runtime  - where the value actually comes from. It's essentially late-binding which allows runtime determination what action to take when a member is accessed at runtime *if* the member you are accessing does not exist on the object. Class members are checked first before IDynamicMetaObjectProvider interface methods are kick in. All of the following works with the dynamic type:dynamic fooDynamic = new DynamicFoo(); // dynamic typing assignments fooDynamic.NewProperty = "Something new!"; fooDynamic.LastAccess = DateTime.Now; // dynamic assigning static properties fooDynamic.Bar = "dynamic barred"; fooDynamic.Entered = DateTime.Now; // echo back dynamic values Console.WriteLine(fooDynamic.NewProperty); Console.WriteLine(fooDynamic.LastAccess); Console.WriteLine(fooDynamic.Bar); Console.WriteLine(fooDynamic.Entered); The dynamic type can access the native class properties (Bar and Entered) and create and read new ones (NewProperty,LastAccess) all using a single type instance which is pretty cool. As you can see it's pretty easy to create an extensible type this way that can dynamically add members at runtime dynamically. The Alter Ego of IDynamicObject The key point here is that all three statements - explicit, var and dynamic - declare a new DynamicFoo(), but the dynamic declaration results in completely different behavior than the first two simply because the type has been cast to dynamic. Dynamic binding means that the type loses its typical strong typing, compile time features. You can see this easily in the Visual Studio code editor. As soon as you assign a value to a dynamic you lose Intellisense and you see which means there's no Intellisense and no compiler type checking on any members you apply to this instance. If you're new to the dynamic type it might seem really confusing that a single type can behave differently depending on how it is cast, but that's exactly what happens when you use a type that implements IDynamicMetaObjectProvider. Declare the type as its strong type name and you only get to access the native instance members of the type. Declare or cast it to dynamic and you get dynamic behavior which accesses native members plus it uses IDynamicMetaObjectProvider implementation to handle any missing member definitions by running custom code. You can easily cast objects back and forth between dynamic and the original type:dynamic fooDynamic = new DynamicFoo(); fooDynamic.NewProperty = "New Property Value"; DynamicFoo foo = fooDynamic; foo.Bar = "Barred"; Here the code starts out with a dynamic cast and a dynamic assignment. The code then casts back the value to the DynamicFoo. Notice that when casting from dynamic to DynamicFoo and back we typically do not have to specify the cast explicitly - the compiler can induce the type so I don't need to specify as dynamic or as DynamicFoo. Moral of the Story This easy interchange between dynamic and the underlying type is actually super useful, because it allows you to create extensible objects that can expose non-member data stores and expose them as an object interface. You can create an object that hosts a number of strongly typed properties and then cast the object to dynamic and add additional dynamic properties to the same type at runtime. You can easily switch back and forth between the strongly typed instance to access the well-known strongly typed properties and to dynamic for the dynamic properties added at runtime. Keep in mind that dynamic object access has quite a bit of overhead and is definitely slower than strongly typed binding, so if you're accessing the strongly typed parts of your objects you definitely want to use a strongly typed reference. Reserve dynamic for the dynamic members to optimize your code. The real beauty of dynamic is that with very little effort you can build expandable objects or objects that expose different data stores to an object interface. I'll have more on this in my next post when I create a customized and extensible Expando object based on DynamicObject.© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Sending an Activation Email when a New User Registers

  - by John

  Hello, The code below is a login system that I am using. It is supposed to allow a new user to register and then send the new user an activation email. It is inserting the new user into the MySQL database, but it is not sending the activation email. Any ideas why it's not sending the activation email? Thanks in advance, John header.php: <?php //error_reporting(0); session_start(); require_once ('db_connect.inc.php'); require_once ("function.inc.php"); $seed="0dAfghRqSTgx"; $domain = "...com"; ?> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>The Sandbox - <?php echo $domain; ?></title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <link rel="stylesheet" type="text/css" href="sandbox.css"> <div class="hslogo"><a href="http://www...com/sandbox/"><img src="images/hslogo.png" alt="Example" border="0"/></a></div> </head> <body> login.php: <?php if (!isLoggedIn()) { // user is not logged in. if (isset($_POST['cmdlogin'])) { // retrieve the username and password sent from login form & check the login. if (checkLogin($_POST['username'], $_POST['password'])) { show_userbox(); } else { echo "Incorrect Login information !"; show_loginform(); } } else { // User is not logged in and has not pressed the login button // so we show him the loginform show_loginform(); } } else { // The user is already loggedin, so we show the userbox. show_userbox(); } ?> function show_loginform($disabled = false) { echo '<form name="login-form" id="login-form" method="post" action="./index.php?'.$_SERVER['QUERY_STRING'].'"> <div class="usernameformtext"><label title="Username">Username: </label></div> <div class="usernameformfield"><input tabindex="1" accesskey="u" name="username" type="text" maxlength="30" id="username" /></div> <div class="passwordformtext"><label title="Password">Password: </label></div> <div class="passwordformfield"><input tabindex="2" accesskey="p" name="password" type="password" maxlength="15" id="password" /></div> <div class="registertext"><a href="http://www...com/sandbox/register.php" title="Register">Register</a></div> <div class="lostpasswordtext"><a href="http://www...com/sandbox/lostpassword.php" title="Lost Password">Lost password?</a></div> <p class="loginbutton"><input tabindex="3" accesskey="l" type="submit" name="cmdlogin" value="Login" '; if ($disabled == true) { echo 'disabled="disabled"'; } echo ' /></p></form>'; } register.php: <?php require_once "header.php"; if (isset($_POST['register'])){ if (registerNewUser($_POST['username'], $_POST['password'], $_POST['password2'], $_POST['email'])){ echo "<div class='registration'>Thank you for registering, an email has been sent to your inbox, Please activate your account. <a href='http://www...com/sandbox/index.php'>Click here to login.</a> </div>"; }else { echo "Registration failed! Please try again."; show_registration_form(); } } else { // has not pressed the register button show_registration_form(); } ?> New User Function: function registerNewUser($username, $password, $password2, $email) { global $seed; if (!valid_username($username) || !valid_password($password) || !valid_email($email) || $password != $password2 || user_exists($username)) { return false; } $code = generate_code(20); $sql = sprintf("insert into login (username,password,email,actcode) value ('%s','%s','%s','%s')", mysql_real_escape_string($username), mysql_real_escape_string(sha1($password . $seed)) , mysql_real_escape_string($email), mysql_real_escape_string($code)); if (mysql_query($sql)) { $id = mysql_insert_id(); if (sendActivationEmail($username, $password, $id, $email, $code)) { return true; } else { return false; } } else { return false; } return false; } Send Activation Email function: function sendActivationEmail($username, $password, $uid, $email, $actcode) { global $domain; $link = "http://www.$domain/sandbox/activate.php?uid=$uid&actcode=$actcode"; $message = " Thank you for registering on http://www.$domain/, Your account information: username: $username password: $password Please click the link below to activate your account. $link Regards $domain Administration "; if (sendMail($email, "Please activate your account.", $message, "no-reply@$domain")) { return true; } else { return false; } }

  Read the article

• .NET 4.5 is an in-place replacement for .NET 4.0

  - by Rick Strahl

  With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• South Florida Code Camp 2010 &ndash; VI &ndash; 2010-02-27

  - by Dave Noderer

  Catching up after our sixth code camp here in the Ft Lauderdale, FL area. Website at: http://www.fladotnet.com/codecamp. For the 5th time, DeVry University hosted the event which makes everything else really easy! Statistics from 2010 South Florida Code Camp: 848 registered (we use Microsoft Group Events) ~ 600 attended (516 took name badges) 64 speakers (including speaker idol) 72 sessions 12 parallel tracks Food 400 waters 600 sodas 900 cups of coffee (it was cold!) 200 pounds of ice 200 pizza's 10 large salad trays 900 mouse pads Photos on facebook Dave Noderer: http://www.facebook.com/home.php#!/album.php?aid=190812&id=693530361 Joe Healy: http://www.facebook.com/devfish?ref=mf#!/album.php?aid=202787&id=720054950 Will Strohl:http://www.facebook.com/home.php#!/album.php?aid=2045553&id=1046966128&ref=mf Veronica Gonzalez: http://www.facebook.com/home.php#!/album.php?aid=150954&id=672439484 Florida Speaker Idol One of the sessions at code camp was the South Florida Regional speaker idol competition. After user group level competitions there are five competitors. I acted as MC and score keeper while Ed Hill, Bob O’Connell, John Dunagan and Shervin Shakibi were judges. This statewide competition is being run by Roy Lawsen in Lakeland and the winner, Jeff Truman from Naples will move on to the state finals to be held at the Orlando Code Camp on 3/27/2010: http://www.orlandocodecamp.com/. Each speaker has 10 minutes. The participants were: Alex Koval Jeff Truman Jared Nielsen Chris Catto Venkat Narayanasamy They all did a great job and I’m working with each to make sure they don’t stop there and start speaking at meetings. Thanks to everyone involved! Volunteers As always events like this don’t happen without a lot of help! The key people were: Ed Hill, Bob O’Connell – DeVry For the months leading up to the event, Ed collects all of the swag, books, etc and stores them. He holds meeting with various DeVry departments to coordinate the day, he works with the students in the days  before code camp to stuff bags, print signs, arrange tables and visit BJ’s for our supplies (I go and pay but have a small car!). And of course the day of the event he is there at 5:30 am!! We took two SUV’s to BJ’s, i was really worried that the 36 cases of water were going to break his rear axle! He also helps with the students and works very hard before and after the event. Rainer Haberman – Speakers and Volunteer of the Year Rainer has helped over the past couple of years but this time he took full control of arranging the tracks. I did some preliminary work solicitation speakers but he took over all communications after that. We have tried various organizations around speakers, chair per track, central team but having someone paying attention to the details is definitely the way to go! This was the first year I did not have to jump in at the last minute and re-arrange everything. There were lots of kudo’s from the speakers too saying they felt it was more organized than they have experienced in the past from any code camp. Thanks Rainer! Ray Alamonte – Book Swap We saw the idea of a book swap from the Alabama Code Camp and thought we would give it a try. Ray jumped in and took control. The idea was to get people to bring their old technical books to swap or for others to buy. You got a ticket for each book you brought that you could then turn in to buy another book. If you did not have a ticket you could buy a book for $1. Net proceeds were $153 which I rounded up and donated to the Red Cross. There is plenty going on in Haiti and Chile! I don’t think we really got a count of how many books came in. I many cases the books barely hit the table before being picked up again. At the end we were left with a dozen books which we donated to the DeVry library. A great success we will definitely do again! Jace Weiss / Ratchelen Hut – Coffee and Snacks Wow, this was an eye opener. In past years a few of us would struggle to give some attention to coffee, snacks, etc. But it was always tenuous and always ended up running out of coffee. In the past we have tried buying Dunkin Donuts coffee, renting urns, borrowing urns, etc. This year I actually purchased 2 – 100 cup Westbend commercial brewers plus a couple of small urns (30 and 60 cup we used for decaf). We got them both started early (although i forgot to push the on button on one!) and primed it with 10 boxes of Joe from Dunkin. then Jace and Rachelen took over.. once a batch was brewed they would refill the boxes, keep the area clean and at one point were filling cups. We never ran out of coffee and served a few hundred more than last  year. We did look but next year I’ll get a large insulated (like gatorade) dispensing container. It all went very smoothly and having help focused on that one area was a big win. Thanks Jace and Rachelen! Ken & Shirley Golding / Roberta Barbosa – Registration Ken & Shirley showed up and took over registration. This year we printed small name tags for everyone registered which was great because it is much easier to remember someone’s name when they are labeled! In any case it went the smoothest it has ever gone. All three were actively pulling people through the registration, answering questions, directing them to bags and information very quickly. I did not see that there was too big a line at any time. Thanks!! Scott Katarincic / Vishal Shukla – Website For the 3rd?? year in a row, Scott was in charge of the website starting in August or September when I start on code camp. He handles all the requests, makes changes to the site and admin. I think two years ago he wrote all the backend administration and tunes it and the website a bit but things are pretty stable. The only thing I do is put up the sponsors. It is a big pressure off of me!! Thanks Scott! Vishal jumped into the web end this year and created a new Silverlight agenda page to replace the old ajax page. We will continue to enhance this but it is definitely a good step forward! Thanks! Alex Funkhouser – T-shirts/Mouse pads/tables/sponsors Alex helps in many areas. He helps me bring in sponsors and handles all the logistics for t-shirts, sponsor tables and this year the mouse pads. He is also a key person to help promote the event as well not to mention the after after party which I did not attend and don’t want to know much about! Students There were a number of student volunteers but don’t have all of their names. But thanks to them, they stuffed bags, patrolled pizza and helped with moving things around. Sponsors We had a bunch of great sponsors which allowed us to feed people and give a way a lot of great swag. Our major sponsors of DeVry, Microsoft (both DPE and UGSS), Infragistics, Telerik, SQL Share (End to End, SQL Saturdays), and Interclick are very much appreciated. The other sponsors Applied Innovations (also supply code camp hosting), Ultimate Software (a great local SW company), Linxter (reliable cloud messaging we are lucky to have here!), Mediascend (a media startup), SoftwareFX (another local SW company we are happy to have back participating in CC), CozyRoc (if you do SSIS, check them out), Arrow Design (local DNN and Silverlight experts),Boxes and Arrows (a local SW consulting company) and Robert Half. One thing we did this year besides a t-shirt was a mouse pad. I like it because it will be around for a long time on many desks. After much investigation and years of using mouse pad’s I’ve determined that the 1/8” fabric top is the best and that is what we got!   So now I get a break for a few months before starting again!

  Read the article

• How to manually patch Blogger template to use Disqus

  - by user317944

  I'm trying to add disqus to my blog and I tried following this guide to do so: http://disqus.com/docs/patch-blogger/ However their instructions are completely off with what I have on my custom template. Here is the template: <b:skin><![CDATA[/*----------------------------------------------- Blogger Template Style Name: Picture Window Designer: Josh Peterson URL: www.noaesthetic.com ----------------------------------------------- */ /* Variable definitions ==================== */ /* Content ----------------------------------------------- */ body { font: $(body.font); color: $(body.text.color); } html body .region-inner { min-width: 0; max-width: 100%; width: auto; } .content-outer { font-size: 90%; } a:link { text-decoration:none; color: $(link.color); } a:visited { text-decoration:none; color: $(link.visited.color); } a:hover { text-decoration:underline; color: $(link.hover.color); } .body-fauxcolumn-outer { background: $(body.background); } .content-outer { background: $(content.background); -moz-border-radius: $(content.border.radius); -webkit-border-radius: $(content.border.radius); -goog-ms-border-radius: $(content.border.radius); border-radius: $(content.border.radius); -moz-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 0 $(content.shadow.spread) rgba(0, 0, 0, .15); margin: $(content.margin) auto; } .content-inner { padding: $(content.padding); } /* Header ----------------------------------------------- */ .header-outer { background: $(header.background.color) $(header.background.gradient) repeat-x scroll top left; _background-image: none; color: $(header.text.color); -moz-border-radius: $(header.border.radius); -webkit-border-radius: $(header.border.radius); -goog-ms-border-radius: $(header.border.radius); border-radius: $(header.border.radius); } .Header img, .Header #header-inner { -moz-border-radius: $(header.border.radius); -webkit-border-radius: $(header.border.radius); -goog-ms-border-radius: $(header.border.radius); border-radius: $(header.border.radius); } .header-inner .Header .titlewrapper, .header-inner .Header .descriptionwrapper { padding-left: $(header.padding); padding-right: $(header.padding); } .Header h1 { font: $(header.font); text-shadow: 1px 1px 3px rgba(0, 0, 0, 0.3); } .Header h1 a { color: $(header.text.color); } .Header .description { font-size: 130%; } /* Tabs ----------------------------------------------- */ .tabs-inner { margin: .5em $(tabs.margin.sides) $(tabs.margin.bottom); padding: 0; } .tabs-inner .section { margin: 0; } .tabs-inner .widget ul { padding: 0; background: $(tabs.background.color) $(tabs.background.gradient) repeat scroll bottom; -moz-border-radius: $(tabs.border.radius); -webkit-border-radius: $(tabs.border.radius); -goog-ms-border-radius: $(tabs.border.radius); border-radius: $(tabs.border.radius); } .tabs-inner .widget li { border: none; } .tabs-inner .widget li a { display: block; padding: .5em 1em; margin-$endSide: $(tabs.spacing); color: $(tabs.text.color); font: $(tabs.font); -moz-border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; -webkit-border-top-left-radius: $(tab.border.radius); -webkit-border-top-right-radius: $(tab.border.radius); -goog-ms-border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; border-radius: $(tab.border.radius) $(tab.border.radius) 0 0; background: $(tab.background); border-$endSide: 1px solid $(tabs.separator.color); } .tabs-inner .widget li:first-child a { padding-$startSide: 1.25em; -moz-border-radius-top$startSide: $(tab.first.border.radius); -moz-border-radius-bottom$startSide: $(tabs.border.radius); -webkit-border-top-$startSide-radius: $(tab.first.border.radius); -webkit-border-bottom-$startSide-radius: $(tabs.border.radius); -goog-ms-border-top-$startSide-radius: $(tab.first.border.radius); -goog-ms-border-bottom-$startSide-radius: $(tabs.border.radius); border-top-$startSide-radius: $(tab.first.border.radius); border-bottom-$startSide-radius: $(tabs.border.radius); } .tabs-inner .widget li.selected a, .tabs-inner .widget li a:hover { position: relative; z-index: 1; background: $(tabs.selected.background.color) $(tab.selected.background.gradient) repeat scroll bottom; color: $(tabs.selected.text.color); -moz-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 0 $(region.shadow.spread) rgba(0, 0, 0, .15); } /* Headings ----------------------------------------------- */ h2 { font: $(widget.title.font); text-transform: $(widget.title.text.transform); color: $(widget.title.text.color); margin: .5em 0; } /* Main ----------------------------------------------- */ .main-outer { background: $(main.background); -moz-border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; -webkit-border-top-left-radius: $(main.border.radius.top); -webkit-border-top-right-radius: $(main.border.radius.top); -webkit-border-bottom-left-radius: 0; -webkit-border-bottom-right-radius: 0; -goog-ms-border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; border-radius: $(main.border.radius.top) $(main.border.radius.top) 0 0; -moz-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); } .main-inner { padding: 15px $(main.padding.sides) 20px; } .main-inner .column-center-inner { padding: 0 0; } .main-inner .column-left-inner { padding-left: 0; } .main-inner .column-right-inner { padding-right: 0; } /* Posts ----------------------------------------------- */ h3.post-title { margin: 0; font: $(post.title.font); } .comments h4 { margin: 1em 0 0; font: $(post.title.font); } .post-outer { background-color: $(post.background.color); border: solid 1px $(post.border.color); -moz-border-radius: $(post.border.radius); -webkit-border-radius: $(post.border.radius); border-radius: $(post.border.radius); -goog-ms-border-radius: $(post.border.radius); padding: 15px 20px; margin: 0 $(post.margin.sides) 20px; } .post-body { line-height: 1.4; font-size: 110%; } .post-header { margin: 0 0 1.5em; color: $(post.footer.text.color); line-height: 1.6; } .post-footer { margin: .5em 0 0; color: $(post.footer.text.color); line-height: 1.6; } blog-pager { font-size: 140% } comments .comment-author { padding-top: 1.5em; border-top: dashed 1px #ccc; border-top: dashed 1px rgba(128, 128, 128, .5); background-position: 0 1.5em; } comments .comment-author:first-child { padding-top: 0; border-top: none; } .avatar-image-container { margin: .2em 0 0; } /* Widgets ----------------------------------------------- */ .widget ul, .widget #ArchiveList ul.flat { padding: 0; list-style: none; } .widget ul li, .widget #ArchiveList ul.flat li { border-top: dashed 1px #ccc; border-top: dashed 1px rgba(128, 128, 128, .5); } .widget ul li:first-child, .widget #ArchiveList ul.flat li:first-child { border-top: none; } .widget .post-body ul { list-style: disc; } .widget .post-body ul li { border: none; } /* Footer ----------------------------------------------- */ .footer-outer { color:$(footer.text.color); background: $(footer.background); -moz-border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); -webkit-border-top-left-radius: $(footer.border.radius.top); -webkit-border-top-right-radius: $(footer.border.radius.top); -webkit-border-bottom-left-radius: $(footer.border.radius.bottom); -webkit-border-bottom-right-radius: $(footer.border.radius.bottom); -goog-ms-border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); border-radius: $(footer.border.radius.top) $(footer.border.radius.top) $(footer.border.radius.bottom) $(footer.border.radius.bottom); -moz-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -webkit-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); -goog-ms-box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); box-shadow: 0 $(region.shadow.offset) $(region.shadow.spread) rgba(0, 0, 0, .15); } .footer-inner { padding: 10px $(main.padding.sides) 20px; } .footer-outer a { color: $(footer.link.color); } .footer-outer a:visited { color: $(footer.link.visited.color); } .footer-outer a:hover { color: $(footer.link.hover.color); } .footer-outer .widget h2 { color: $(footer.widget.title.text.color); } ]] <b:template-skin> <b:variable default='930px' name='content.width' type='length' value='930px'/> <b:variable default='0' name='main.column.left.width' type='length' value='180px'/> <b:variable default='360px' name='main.column.right.width' type='length' value='180px'/> <![CDATA[ body { min-width: $(content.width); } .content-outer, .region-inner { min-width: $(content.width); max-width: $(content.width); _width: $(content.width); } .main-inner .columns { padding-left: $(main.column.left.width); padding-right: $(main.column.right.width); } .main-inner .fauxcolumn-center-outer { left: $(main.column.left.width); right: $(main.column.right.width); /* IE6 does not respect left and right together */ _width: expression(this.parentNode.offsetWidth - parseInt("$(main.column.left.width)") - parseInt("$(main.column.right.width)") + 'px'); } .main-inner .fauxcolumn-left-outer { width: $(main.column.left.width); } .main-inner .fauxcolumn-right-outer { width: $(main.column.right.width); } .main-inner .column-left-outer { width: $(main.column.left.width); right: $(main.column.left.width); margin-right: -$(main.column.left.width); } .main-inner .column-right-outer { width: $(main.column.right.width); margin-right: -$(main.column.right.width); } #layout { min-width: 0; } #layout .content-outer { min-width: 0; width: 800px; } #layout .region-inner { min-width: 0; width: auto; } ]]> </b:template-skin> <div class='main-cap-bottom cap-bottom'> <div class='cap-left'/> <div class='cap-right'/> </div> </div> <footer> <div class='footer-outer'> <div class='footer-cap-top cap-top'> <div class='cap-left'/> <div class='cap-right'/> </div> <div class='fauxborder-left footer-fauxborder-left'> <div class='fauxborder-right footer-fauxborder-right'/> <div class='region-inner footer-inner'> <macro:include id='footer-sections' name='sections'> <macro:param default='2' name='num' value='3'/> <macro:param default='footer' name='idPrefix'/> <macro:param default='foot' name='class'/> <macro:param default='false' name='includeBottom'/> </macro:include> <!-- outside of the include in order to lock Attribution widget --> <b:section class='foot' id='footer-3' showaddelement='no'> document.body.className = document.body.className.replace('loading', ''); <macro:if cond='data:col.num &gt;= 2'> <table border='0' cellpadding='0' cellspacing='0' mexpr:class='&quot;section-columns columns-&quot; + data:col.num'> <tbody> <tr> <td class='first columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-1&quot;'/> </td> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-2&quot;'/> </td> <macro:if cond='data:col.num &gt;= 3'> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-3&quot;'/> </td> </macro:if> <macro:if cond='data:col.num &gt;= 4'> <td class='columns-cell'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-2-4&quot;'/> </td> </macro:if> </tr> </tbody> </table> <macro:if cond='data:col.includeBottom'> <b:section mexpr:class='data:col.class' mexpr:id='data:col.idPrefix + &quot;-3&quot;' showaddelement='no'/> </macro:if> </macro

  Read the article

• 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

  - by user1898041

  Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

  Read the article

• Fixing a SkyDrive Sync Disaster

  - by Rick Strahl

  For a few months I've been using SkyDrive to handle some basic synching tasks for a number of folders of mine. Specifically I've been dumping a few of my development folders into sky drive so I have a live running backup. It had been working just fine until about a week ago when something went awry. Badly! The idea is that the SkyDrive should sync files, but somewhere in its sync relationship it appears that SkyDrive got confused and assumed it needed to sync back older files to my local machine from the SkyDrive server. So rather than syncing my newer files to the server SkyDrive was pushing older files back to me. Because SkyDrive is so slow actually updating data it's not unusual for SkyDrive to be far behind in syncing and apparently some files were out of date by several months. Of course this is insidious because I didn't notice it for quite some time. I'd been happily working away on my files when a few days ago I noted a bunch of files with -RasXps (my machine name) popping up in various folders. At first I thought my Git repository was giving me a fit, but eventually realized that SkyDrive was actually pushing old files into my monitored folders. To be fair SkyDrive did make backups of the existing files, but by the time I caught it there were literally a few thousand files scattered on my machine that were now updated with old files from online. Here's what some of this looks like: If you look at the directory list you see a bunch of files with a -RasXps postfix appended to them. Those are the files that SkyDrive replaced and backed up on my machine. As you can see the backed up files are actually newer than the ones it pulled from the online SkyDrive. Unless I modified the files after they were updated they all were older than the existing local files. Not exactly how I imagined my synching would work. At first I started cleaning up this mess manually. In most cases the obvious solution was to simply delete the original file and replace with the -RasXps file, but not in all files. Some scrutiny was required and besides being a pain in the ass to rename files, quite frequently I had to dig out Beyond Compare to compare a few files where it wasn't quite clear what's wrong. I quickly realized that doing this by hand would be too hard for the large number of files that got hosed. Hacking together a small .NET Utility So, I figured the easiest way to tackle this is to write a small utility app that shows me all the mangled files that have backups, allows me to compare them and then quickly select and update them, removing the -RasXps file after choosing one of the two files. What I ended up with was a quick and dirty WinForms app that allows me to pick a root folder, and then shows all the -MachineName files: I start by picking a base folder and a template to search for - typically the -MachineName. Clicking Go brings up a list of all files in that folder and its subdirectories.  The list also displays the dates for the saved (-MachineName) file and the current file on disk, along with highlighting for the newer of the two. I can right click on any file and get a context menu pop up to open the folder in Explorer, or open Beyond Compare and view the two files to compare differences which I found very helpful for a number of files where I had modified the files after SkyDrive had updated to an old one. Typically these would be the green files (of which there were thankfully few). To 'fix' files I can select any number of files in the list, then use one of the three buttons on the right to apply an operation. I can use the Saved files - that is the backup file that SkyDrive created with the -MachineName extension (-RasXps above). Or I can use the current file, which is the file with the right name on disk right now and delete the -MachineName file. Or on some occasions I can just opt to delete both of them. For some files like binaries it's often easier to just delete and them be rebuild than choosing. For the most part the process involves accepting the pink files, and checking the few green files and see if any modifications were made since the file was updated incorrectly by SkyDrive. For me luckily those are few in number. Anyways, I thought I share this utility in case anybody else runs into this issue. I've included the VS2012 solution and all the source code so you can see how it works and you can tweak it as needed. The .NET 4.5 binaries are also included if you can't compile. Be warned though!  This rough code is provided as is and makes no guarantees or claims about file safety. All three of the action buttons on the form will delete data. It's a very rough utility and there are no safeguards that ask nicely before deleting files. I highly recommend you make a backup before you have at it. This tools is very narrow in focus, but it might also work with other sync issues from other vendors. I seem to remember that I had similar issues with SugarSync at some point and it too created the -MachineName style files on sync conflicts. Hope this helps somebody out so you can avoid wasting the better part of a full work day on this… Resources Download the Source Code and Binaries for SkyDrive Rescue© Rick Strahl, West Wind Technologies, 2005-2013Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Help! cant login to my forum after .htaccess changes

  - by MrRioku

  I'm running a phpbb forum and I installed an SEO friendly URL Mod. After I installed it I wasn't able to login as the admin nor any other users... Well I've been messing around with this problem for a bit and I did find out that it was the .htaccess file that was causing me not to be able to login. I found out if I comment the canonical part out in the .htaccess file, my website allows me to login and see the working mod just fine but I get "http://phone7forum.com/" instead of what I want which is "http://www.phone7forum.com/ : enter code here # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] enter code here I definitely want the "http://www." since its the best method and holds the best weight.. But when I un-comment it, it will not allow me to login as the admin nor any user... Is there anything I can do to fix this matter??? I'd like to add, before I found this website I installed the Mod "Canonical URL" found here: http://www.phpbb.com/customise/db/mod/canonical_url/ Possibly this might be part of my issue? Maybe I should go undo everything that Mod told me to do and then try un-commenting the canonical section in the .htaccess file? Here is my complete .htaccess file as of now that produces the "http://phone7forum.com/" and allows me to login: [code] # Lines That should already be in your .htacess <Files "config.php"> Order Allow,Deny Deny from All </Files> <Files "common.php"> Order Allow,Deny Deny from All </Files> # You may need to un-comment the following lines # Options +FollowSymlinks # To make sure that rewritten dir or file (/|.html) will not load dir.php in case it exist # Options -MultiViews # REMEBER YOU ONLY NEED TO STARD MOD REWRITE ONCE RewriteEngine On # Uncomment the statement below if you want to make use of # HTTP authentication and it does not already work. # This could be required if you are for example using PHP via Apache CGI. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # REWRITE BASE RewriteBase / # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] # DO NOT GO FURTHER IF THE REQUESTED FILE / DIR DOES EXISTS RewriteCond %{REQUEST_FILENAME} -f RewriteCond %{REQUEST_FILENAME} -d RewriteRule . - [L] ##################################################### # PHPBB SEO REWRITE RULES ALL MODES ##################################################### # AUTHOR : dcz www.phpbb-seo.com # STARTED : 01/2006 ################################# # FORUMS PAGES ############### # FORUM INDEX REWRITERULE WOULD STAND HERE IF USED. "forum" REQUIRES TO BE SET AS FORUM INDEX # RewriteRule ^forum\.html$ index.php [QSA,L,NC] # FORUM ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/?(page([0-9]+)\.html)?$ viewforum.php?f=$2&start=$4 [QSA,L,NC] # TOPIC WITH VIRTUAL FOLDER ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?f=$2&t=$4&start=$6 [QSA,L,NC] # TOPIC WITHOUT FORUM ID & DELIM ALL MODES RewriteRule ^([a-z0-9_-]*)/?(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?forum_uri=$1&t=$3&start=$5 [QSA,L,NC] # PHPBB FILES ALL MODES RewriteRule ^resources/[a-z0-9_-]+/(thumb/)?([0-9]+)$ download/file.php?id=$2&t=$1 [QSA,L,NC] # PROFILES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)\.html$ memberlist.php?mode=viewprofile&u=$2 [QSA,L,NC] # USER MESSAGES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)-(topics|posts)(-([0-9]+))?\.html$ search.php?author_id=$2&sr=$3&start=$5 [QSA,L,NC] # GROUPS ALL MODES RewriteRule ^(group|[a-z0-9_-]*-g)([0-9]+)(-([0-9]+))?\.html$ memberlist.php?mode=group&g=$2&start=$4 [QSA,L,NC] # POST RewriteRule ^post([0-9]+)\.html$ viewtopic.php?p=$1 [QSA,L,NC] # ACTIVE TOPICS RewriteRule ^active-topics(-([0-9]+))?\.html$ search.php?search_id=active_topics&start=$2&sr=topics [QSA,L,NC] # UNANSWERED TOPICS RewriteRule ^unanswered(-([0-9]+))?\.html$ search.php?search_id=unanswered&start=$2&sr=topics [QSA,L,NC] # NEW POSTS RewriteRule ^newposts(-([0-9]+))?\.html$ search.php?search_id=newposts&start=$2&sr=topics [QSA,L,NC] # UNREAD POSTS RewriteRule ^unreadposts(-([0-9]+))?\.html$ search.php?search_id=unreadposts&start=$2 [QSA,L,NC] # THE TEAM RewriteRule ^the-team\.html$ memberlist.php?mode=leaders [QSA,L,NC] # HERE IS A GOOD PLACE TO ADD OTHER PHPBB RELATED REWRITERULES # FORUM WITHOUT ID & DELIM ALL MODES # THESE THREE LINES MUST BE LOCATED AT THE END OF YOUR HTACCESS TO WORK PROPERLY RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_-]+)/?(page([0-9]+)\.html)?$ viewforum.php?forum_uri=$1&start=$3 [QSA,L,NC] # FIX RELATIVE PATHS : FILES RewriteRule ^.+/(style\.php|ucp\.php|mcp\.php|faq\.php|download/file.php)$ $1 [QSA,L,NC,R=301] # FIX RELATIVE PATHS : IMAGES RewriteRule ^.+/(styles/.*|images/.*)/$ $1 [QSA,L,NC,R=301] # END PHPBB PAGES ##################################################### [/code] Does anyone have any clues as to what I need to do? Any help will be greatly appreciated! Thanks, Justin

  Read the article

• Dynamic Code for type casting Generic Types 'generically' in C#

  - by Rick Strahl

  C# is a strongly typed language and while that's a fundamental feature of the language there are more and more situations where dynamic types make a lot of sense. I've written quite a bit about how I use dynamic for creating new type extensions: Dynamic Types and DynamicObject References in C# Creating a dynamic, extensible C# Expando Object Creating a dynamic DataReader for dynamic Property Access Today I want to point out an example of a much simpler usage for dynamic that I use occasionally to get around potential static typing issues in C# code especially those concerning generic types. TypeCasting Generics Generic types have been around since .NET 2.0 I've run into a number of situations in the past - especially with generic types that don't implement specific interfaces that can be cast to - where I've been unable to properly cast an object when it's passed to a method or assigned to a property. Granted often this can be a sign of bad design, but in at least some situations the code that needs to be integrated is not under my control so I have to make due with what's available or the parent object is too complex or intermingled to be easily refactored to a new usage scenario. Here's an example that I ran into in my own RazorHosting library - so I have really no excuse, but I also don't see another clean way around it in this case. A Generic Example Imagine I've implemented a generic type like this: public class RazorEngine<TBaseTemplateType> where TBaseTemplateType : RazorTemplateBase, new() You can now happily instantiate new generic versions of this type with custom template bases or even a non-generic version which is implemented like this: public class RazorEngine : RazorEngine<RazorTemplateBase> { public RazorEngine() : base() { } } To instantiate one: var engine = new RazorEngine<MyCustomRazorTemplate>(); Now imagine that the template class receives a reference to the engine when it's instantiated. This code is fired as part of the Engine pipeline when it gets ready to execute the template. It instantiates the template and assigns itself to the template: var template = new TBaseTemplateType() { Engine = this } The problem here is that possibly many variations of RazorEngine<T> can be passed. I can have RazorTemplateBase, RazorFolderHostTemplateBase, CustomRazorTemplateBase etc. as generic parameters and the Engine property has to reflect that somehow. So, how would I cast that? My first inclination was to use an interface on the engine class and then cast to the interface.  Generally that works, but unfortunately here the engine class is generic and has a few members that require the template type in the member signatures. So while I certainly can implement an interface: public interface IRazorEngine<TBaseTemplateType> it doesn't really help for passing this generically templated object to the template class - I still can't cast it if multiple differently typed versions of the generic type could be passed. I have the exact same issue in that I can't specify a 'generic' generic parameter, since there's no underlying base type that's common. In light of this I decided on using object and the following syntax for the property (and the same would be true for a method parameter): public class RazorTemplateBase :MarshalByRefObject,IDisposable { public object Engine {get;set; } } Now because the Engine property is a non-typed object, when I need to do something with this value, I still have no way to cast it explicitly. What I really would need is: public RazorEngine<> Engine { get; set; } but that's not possible. Dynamic to the Rescue Luckily with the dynamic type this sort of thing can be mitigated fairly easily. For example here's a method that uses the Engine property and uses the well known class interface by simply casting the plain object reference to dynamic and then firing away on the properties and methods of the base template class that are common to all templates:/// <summary> /// Allows rendering a dynamic template from a string template /// passing in a model. This is like rendering a partial /// but providing the input as a /// </summary> public virtual string RenderTemplate(string template,object model) { if (template == null) return string.Empty; // if there's no template markup if(!template.Contains("@")) return template; // use dynamic to get around generic type casting dynamic engine = Engine; string result = engine.RenderTemplate(template, model); if (result == null) throw new ApplicationException("RenderTemplate failed: " + engine.ErrorMessage); return result; } Prior to .NET 4.0  I would have had to use Reflection for this sort of thing which would have a been a heck of a lot more verbose, but dynamic makes this so much easier and cleaner and in this case at least the overhead is negliable since it's a single dynamic operation on an otherwise very complex operation call. Dynamic as  a Bailout Sometimes this sort of thing often reeks of a design flaw, and I agree that in hindsight this could have been designed differently. But as is often the case this particular scenario wasn't planned for originally and removing the generic signatures from the base type would break a ton of other code in the framework. Given the existing fairly complex engine design, refactoring an interface to remove generic types just to make this particular code work would have been overkill. Instead dynamic provides a nice and simple and relatively clean solution. Now if there were many other places where this occurs I would probably consider reworking the code to make this cleaner but given this isolated instance and relatively low profile operation use of dynamic seems a valid choice for me. This solution really works anywhere where you might end up with an inheritance structure that doesn't have a common base or interface that is sufficient. In the example above I know what I'm getting but there's no common base type that I can cast to. All that said, it's a good idea to think about use of dynamic before you rush in. In many situations there are alternatives that can still work with static typing. Dynamic definitely has some overhead compared to direct static access of objects, so if possible we should definitely stick to static typing. In the example above the application already uses dynamics extensively for dynamic page page templating and passing models around so introducing dynamics here has very little additional overhead. The operation itself also fires of a fairly resource heavy operation where the overhead of a couple of dynamic member accesses are not a performance issue. So, what's your experience with dynamic as a bailout mechanism? © Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Commit in SQL

  - by PRajkumar

  SQL Transaction Control Language Commands (TCL)                                           (COMMIT) Commit Transaction As a SQL language we use transaction control language very frequently. Committing a transaction means making permanent the changes performed by the SQL statements within the transaction. A transaction is a sequence of SQL statements that Oracle Database treats as a single unit. This statement also erases all save points in the transaction and releases transaction locks. Oracle Database issues an implicit COMMIT before and after any data definition language (DDL) statement. Oracle recommends that you explicitly end every transaction in your application programs with a COMMIT or ROLLBACK statement, including the last transaction, before disconnecting from Oracle Database. If you do not explicitly commit the transaction and the program terminates abnormally, then the last uncommitted transaction is automatically rolled back.   Until you commit a transaction: ·         You can see any changes you have made during the transaction by querying the modified tables, but other users cannot see the changes. After you commit the transaction, the changes are visible to other users' statements that execute after the commit ·         You can roll back (undo) any changes made during the transaction with the ROLLBACK statement   Note: Most of the people think that when we type commit data or changes of what you have made has been written to data files, but this is wrong when you type commit it means that you are saying that your job has been completed and respective verification will be done by oracle engine that means it checks whether your transaction achieved consistency when it finds ok it sends a commit message to the user from log buffer but not from data buffer, so after writing data in log buffer it insists data buffer to write data in to data files, this is how it works.   Before a transaction that modifies data is committed, the following has occurred: ·         Oracle has generated undo information. The undo information contains the old data values changed by the SQL statements of the transaction ·         Oracle has generated redo log entries in the redo log buffer of the System Global Area (SGA). The redo log record contains the change to the data block and the change to the rollback block. These changes may go to disk before a transaction is committed ·         The changes have been made to the database buffers of the SGA. These changes may go to disk before a transaction is committed   Note:   The data changes for a committed transaction, stored in the database buffers of the SGA, are not necessarily written immediately to the data files by the database writer (DBWn) background process. This writing takes place when it is most efficient for the database to do so. It can happen before the transaction commits or, alternatively, it can happen some times after the transaction commits.   When a transaction is committed, the following occurs: 1.      The internal transaction table for the associated undo table space records that the transaction has committed, and the corresponding unique system change number (SCN) of the transaction is assigned and recorded in the table 2.      The log writer process (LGWR) writes redo log entries in the SGA's redo log buffers to the redo log file. It also writes the transaction's SCN to the redo log file. This atomic event constitutes the commit of the transaction 3.      Oracle releases locks held on rows and tables 4.      Oracle marks the transaction complete   Note:   The default behavior is for LGWR to write redo to the online redo log files synchronously and for transactions to wait for the redo to go to disk before returning a commit to the user. However, for lower transaction commit latency application developers can specify that redo be written asynchronously and that transaction do not need to wait for the redo to be on disk.   The syntax of Commit Statement is   COMMIT [WORK] [COMMENT ‘your comment’]; ·         WORK is optional. The WORK keyword is supported for compliance with standard SQL. The statements COMMIT and COMMIT WORK are equivalent. Examples Committing an Insert INSERT INTO table_name VALUES (val1, val2); COMMIT WORK; ·         COMMENT Comment is also optional. This clause is supported for backward compatibility. Oracle recommends that you used named transactions instead of commit comments. Specify a comment to be associated with the current transaction. The 'text' is a quoted literal of up to 255 bytes that Oracle Database stores in the data dictionary view DBA_2PC_PENDING along with the transaction ID if a distributed transaction becomes in doubt. This comment can help you diagnose the failure of a distributed transaction. Examples The following statement commits the current transaction and associates a comment with it: COMMIT     COMMENT 'In-doubt transaction Code 36, Call (415) 555-2637'; ·         WRITE Clause Use this clause to specify the priority with which the redo information generated by the commit operation is written to the redo log. This clause can improve performance by reducing latency, thus eliminating the wait for an I/O to the redo log. Use this clause to improve response time in environments with stringent response time requirements where the following conditions apply: The volume of update transactions is large, requiring that the redo log be written to disk frequently. The application can tolerate the loss of an asynchronously committed transaction. The latency contributed by waiting for the redo log write to occur contributes significantly to overall response time. You can specify the WAIT | NOWAIT and IMMEDIATE | BATCH clauses in any order. Examples To commit the same insert operation and instruct the database to buffer the change to the redo log, without initiating disk I/O, use the following COMMIT statement: COMMIT WRITE BATCH; Note: If you omit this clause, then the behavior of the commit operation is controlled by the COMMIT_WRITE initialization parameter, if it has been set. The default value of the parameter is the same as the default for this clause. Therefore, if the parameter has not been set and you omit this clause, then commit records are written to disk before control is returned to the user. WAIT | NOWAIT Use these clauses to specify when control returns to the user. The WAIT parameter ensures that the commit will return only after the corresponding redo is persistent in the online redo log. Whether in BATCH or IMMEDIATE mode, when the client receives a successful return from this COMMIT statement, the transaction has been committed to durable media. A crash occurring after a successful write to the log can prevent the success message from returning to the client. In this case the client cannot tell whether or not the transaction committed. The NOWAIT parameter causes the commit to return to the client whether or not the write to the redo log has completed. This behavior can increase transaction throughput. With the WAIT parameter, if the commit message is received, then you can be sure that no data has been lost. Caution: With NOWAIT, a crash occurring after the commit message is received, but before the redo log record(s) are written, can falsely indicate to a transaction that its changes are persistent. If you omit this clause, then the transaction commits with the WAIT behavior. IMMEDIATE | BATCH Use these clauses to specify when the redo is written to the log. The IMMEDIATE parameter causes the log writer process (LGWR) to write the transaction's redo information to the log. This operation option forces a disk I/O, so it can reduce transaction throughput. The BATCH parameter causes the redo to be buffered to the redo log, along with other concurrently executing transactions. When sufficient redo information is collected, a disk write of the redo log is initiated. This behavior is called "group commit", as redo for multiple transactions is written to the log in a single I/O operation. If you omit this clause, then the transaction commits with the IMMEDIATE behavior. ·         FORCE Clause Use this clause to manually commit an in-doubt distributed transaction or a corrupt transaction. ·         In a distributed database system, the FORCE string [, integer] clause lets you manually commit an in-doubt distributed transaction. The transaction is identified by the 'string' containing its local or global transaction ID. To find the IDs of such transactions, query the data dictionary view DBA_2PC_PENDING. You can use integer to specifically assign the transaction a system change number (SCN). If you omit integer, then the transaction is committed using the current SCN. ·         The FORCE CORRUPT_XID 'string' clause lets you manually commit a single corrupt transaction, where string is the ID of the corrupt transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to specify this clause. ·         Specify FORCE CORRUPT_XID_ALL to manually commit all corrupt transactions. You must have DBA privileges to specify this clause. Examples Forcing an in doubt transaction. Example The following statement manually commits a hypothetical in-doubt distributed transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to issue this statement. COMMIT FORCE '22.57.53';

  Read the article

• Partial Page Rendering in OAF Page

  - by PRajkumar

  Let us try to implement partial page rendering for a text item. If value of TextItem1 is null then TextItem2 will not be appreared on UI. If value of TextItem1 is not null then TextItem2 will be appreared on UI.   1. Create a New OA Workspace and Empty OA Project File> New > General> Workspace Configured for Oracle Applications File Name -- PPRProj Project Name – PPRDemoProj Default Package -- prajkumar.oracle.apps.fnd.pprdemo   2. Create Application Module AM PPRDemoProj right click > New > ADF Business Components > Application Module Name -- PPRAM Package -- prajkumar.oracle.apps.fnd.pprdemo.server   Check Application Module Class: PPRAMImpl Generate JavaFile(s)   3. Create a PPRVO View Object PPRDemoProj> New > ADF Business Components > View Objects Name – PPRVO Package – prajkumar.oracle.apps.fnd.pprdemo.server   In Attribute Page Click on New button and create transient primary key attribute with the following properties:   Attribute Property Name RowKey Type Number Updateable Always Key Attribute (Checked)   Click New button again and create transient attribute with the following properties:   Attribute Property Name TextItem2Render Type Boolean Updateable Always   Note – No Need to generate any JAVA files for PPRVO   4. Add Your View Object to Root UI Application Module Right click on PPRAM > Edit PPRAM > Data Model > Select PPRVO in Available View Objects list and shuttle to Data Model list   5. Create a OA components Page PPRDemoProj right click > New > OA Components > Page Name – PPRPG Package -- prajkumar.oracle.apps.fnd.pprdemo.webui   6. Modify the Page Layout (Top-level) Region   Attribute Property ID PageLayoutRN Region Style pageLayout Form Property True Auto Footer True Window Title PPR Demo Window Title True Title PPR Demo Page Header AM Definition prajkumar.oracle.apps.fnd.pprdemo.server.PPRAM   7. Create the Second Region (Main Content Region) Right click on PageLayoutRN > New > Region   Attribute Property ID MainRN Region Style messageComponentLayout   8. Create Two Text Items   Create First messageTextItem -- Right click on MainRN > New > messageTextInput   Attribute Property ID TextItem1 Region Style messageTextInput Prompt Text Item1 Length 20 Disable Server Side Validation True Disable Client Side Validation True Action Type firePartialAction Event TextItem1Change Submit True   Note -- Disable Client Side Validation and Event property appears after you set the Action Type property to firePartialAction   Create Second messageTextItem -- Select MainRN right click > New > messageTextInput   Attribute Property ID TextItem2 Region Style messageTextInput Prompt Text Item2 Length 20 Rendered ${oa.PPRVO1.TextItem2Render}   9. Add Following code in PPRAMImpl.java   import oracle.apps.fnd.framework.OARow; import oracle.apps.fnd.framework.OAViewObject; import oracle.apps.fnd.framework.server.OAApplicationModuleImpl; import oracle.apps.fnd.framework.server.OAViewObjectImpl; public void handlePPRAction()  {   Number val = 1;  OAViewObject vo = (OAViewObject)findViewObject("PPRVO1");  if (vo != null)   {    if (vo.getFetchedRowCount() == 0)    {     vo.setMaxFetchSize(0);     vo.executeQuery();     vo.insertRow(vo.createRow());     OARow row = (OARow)vo.first();            row.setAttribute("RowKey", val);    row.setAttribute("TextItem2Render", Boolean.FALSE);      }  } }   10. Implement Controller for Page Select PageLayoutRN in Structure pane right click > Set New Controller Package Name -- prajkumar.oracle.apps.fnd.pprdemo.webui Class Name – PPRCO   Write following code in processFormRequest function of PPRCO Controller   import oracle.apps.fnd.framework.OARow; import oracle.apps.fnd.framework.OAViewObject; public void processRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processRequest(pageContext, webBean);  PPRAMImpl am = (PPRAMImpl)pageContext.getApplicationModule(webBean);      am.invokeMethod("handlePPRAction"); } public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {  super.processFormRequest(pageContext, webBean);        PPRAMImpl am = (PPRAMImpl)pageContext.getApplicationModule(webBean);  OAViewObject vo = (OAViewObject)am.findViewObject("PPRVO1");  OARow row = (OARow)vo.getCurrentRow();        if ("TextItem1Change".equals(pageContext.getParameter(EVENT_PARAM)))  {   if (pageContext.getParameter("TextItem1").equals(""))   {    row.setAttribute("TextItem2Render", Boolean.FALSE);   }   else   {    row.setAttribute("TextItem2Render", Boolean.TRUE);   }  } }   11. Congratulation you have successfully finished. Run Your PPRPG page and Test Your Work          

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• Complex type support in process flow &ndash; XMLTYPE

  - by shawn

      Before OWB 11.2 release, there are only 5 simple data types supported in process flow: DATE, BOOLEAN, INTEGER, FLOAT and STRING. A new complex data type – XMLTYPE is added in 11.2, in order to support complex data being passed between the process flow activities. In this article we will give a simple example to illustrate the usage of the new type and some related editors.     Suppose there is a bookstore that uses XML format orders as shown below (we use the simplest form for the illustration purpose), then we can create a process flow to handle the order, take the order as the input, then extract necessary information, and generate a confirmation email to the customer automatically. <order id=’0001’>     <customer>         <name>Tom</name>         <email>[email protected]</email>     </customer>     <book id=’Java_001’>         <quantity>3</quantity>     </book> </order>     Considering a simple user case here: we use an input parameter/variable with XMLTYPE to hold the XML content of the order; then we can use an Assign activity to retrieve the email info from the order; after that, we can create an email activity to send the email (Other activities might be added in practical case, but will not be described here). 1) Set XML content value     For testing purpose, we will create a variable to hold the sample order, and then this will be used among the process flow activities. When the variable is of XMLTYPE and the “Literal” value is set the true, the advance editor will be enabled.     Click the “Advance Editor” shown as above, a simple xml editor will popup. The editor has basic features like syntax highlight and check as shown below:     We can also do the basic validation or validation against schema with the editor by selecting the normalized schema. With this, it will be easier to provide the value for XMLTYPE variables. 2) Extract information from XML content     After setting the value, we need to extract the email information with the Assign activity. In process flow, an enhanced expression builder is used to help users construct the XPath for extracting values from XML content. When the variable’s literal value is set the false, the advance editor is enabled.     Click the button, the advance editor will popup, as shown below:     The editor is based on the expression builder (which is often used in mapping etc), an XPath lib panel is appended which provides some help information on how to write the XPath. The expression used here is: “XMLTYPE.EXTRACT(XML_ORDER,'/order/customer/email/text()').getStringVal()”, which uses ‘/order/customer/email/text()’ as the XPath to extract the email info from the XML document.     A variable called “EMAIL_ADDR” is created with String data type to hold the value extracted.     Then we bind the “VARIABLE” parameter of Assign activity to “EMAIL_ADDR” variable, which means the value of the “EMAIL_ADDR” activity will be set to the result of the “VALUE” parameter of Assign activity. 3) Use the extracted information in Email activity     We bind the “TO_ADDRESS” parameter of the email activity to the “EMAIL_ADDR” variable created in above step.     We can also extract other information from the xml order directly through the expression, for example, we can set the “MESSAGE_BODY” with value “'Dear '||XMLTYPE.EXTRACT(XML_ORDER,'/order/customer/name/text()').getStringVal()||chr(13)||chr(10)||'   You have ordered '||XMLTYPE.EXTRACT(XML_ORDER,'/order/book/quantity/text()').getStringVal()||' '||XMLTYPE.EXTRACT(XML_ORDER,'/order/book/@id').getStringVal()”. This expression will extract the customer name, the quantity and the book id from the order to compose the message body.     To make the email activity work, we need provide some other necessary information, Such as “SMTP_SERVER” (which is the SMTP server used to send the emails, like “mail.bookstore.com”. The default PORT number is set to 25. You need to change the value accordingly), “FROM_ADDRESS” and “SUBJECT”. Then the process flow is ready to go.     After deploying the process flow package, we can simply run the process flow to check if the result is as expected (An email will be sent to the specified email address with proper subject and message body).     Note: In oracle 11g, there is an enhanced security feature - ACL (Access Control List), which restrict the network access within db, so we need to edit the list to allow UTL_SMTP work if you are using oracle 11g. Refer to chapter “Access Control Lists for UTL_TCP/HTTP/SMTP” and “Managing Fine-Grained Access to External Network Services” for more details.       In previous releases, XMLTYPE already exists in other OWB objects, like mapping/transformation etc. When the mapping/transformation is dragged into a process flow, the parameters with XMLTYPE are mapped to STRING. Now with the XMLTYPE support in process flow, the XMLTYPE will map to XMLTYPE in a more natural way, and we can leverage the new data type for the design.

  Read the article

• Getting overflow-y:scroll to work with fixed positioning html & css

  - by Vagabond_King

  I have a Jquery tools scrollable thats set to be fixed to the bottom of the browser window. Ideally i would just like to get a overflow-y:scroll; working for the page as a whole when the browser is < 700px. (so no content gets hidden, as its all fixed place). This feels like it should be simple but its causing me huge headaches. js solutions are fine at this point. Thanks in advance. <body> <div id="background"> <div id="fix_to_floor"> <div class="scrollable"> <div class="frame"> <div class="page" id="page1"> <div class="inner_page"> <h2>About Us</h2> <p>content</p> <div class="floor_items"> <img src="images/chair_n_hole.png" width="950" height="700" alt="Chair N Hole"> </div> </div> </div> <div class="page" id="page2"> <div class="inner_page"> <h2>page 2</h2> <p>content</p> <div class="floor_items"> <img src="images/spachairs.png" width="950" height="700" alt="Spachairs"> </div> </div> </div> <div class="page" id="page3"> <div class="inner_page"> <span class="copy"> <h2>Products</h2> </span> </div> </div> </div> </div> </div> </div> </body> body { width: 100%; bottom:0px; position: fixed; } div#background{ height:948px; width:100%; background: #DDD url('../images/working_bg.jpg') repeat-x fixed bottom center; bottom:0px; overflow: scroll; } div#fix_to_floor{ position: fixed; margin: 0 auto; bottom:0px; height: 700px; width: 1700px; } .content img{ position: absolute; bottom: 0; } #content div.floor_items{ position: absolute; bottom:0; width:1700px; width: 950px; height: 700px; } /* **** specific page backgrounds */ /* page 3 - Products */ #page3 .inner_page{ background: url('../images/display.png') no-repeat scroll bottom center; z-index: 50; } #page3 .copy{ float: left; margin: 100px 300px; } #page1 div.floor_items img{ margin: 0 0 0 0px; } /********* SCROLLABLE *********/ div.scrollable{ bottom: 0; position: relative; /* required*/ overflow:hidden; width:1700px; height: 700px; left:0px; } /* needs to be huge and fixed. holds the content */ div.scrollable div.frame{ width: 20000em; position: absolute; height: 700px; } /* single item , must bve floated for horiz. scrolling*/ div.frame div.page{ float:left; width: 1700px; height: 700px; margin: 0; } div.page div.inner_page{ width:950px; height:700px; margin: 0 370px; /* border: 1px solid red;*/ }

  Read the article

• Metro: Grouping Items in a ListView Control

  - by Stephen.Walther

  The purpose of this blog entry is to explain how you can group list items when displaying the items in a WinJS ListView control. In particular, you learn how to group a list of products by product category. Displaying a grouped list of items in a ListView control requires completing the following steps: Create a Grouped data source from a List data source Create a Grouped Header Template Declare the ListView control so it groups the list items Creating the Grouped Data Source Normally, you bind a ListView control to a WinJS.Binding.List object. If you want to render list items in groups, then you need to bind the ListView to a grouped data source instead. The following code – contained in a file named products.js — illustrates how you can create a standard WinJS.Binding.List object from a JavaScript array and then return a grouped data source from the WinJS.Binding.List object by calling its createGrouped() method: (function () { "use strict"; // Create List data source var products = new WinJS.Binding.List([ { name: "Milk", price: 2.44, category: "Beverages" }, { name: "Oranges", price: 1.99, category: "Fruit" }, { name: "Wine", price: 8.55, category: "Beverages" }, { name: "Apples", price: 2.44, category: "Fruit" }, { name: "Steak", price: 1.99, category: "Other" }, { name: "Eggs", price: 2.44, category: "Other" }, { name: "Mushrooms", price: 1.99, category: "Other" }, { name: "Yogurt", price: 2.44, category: "Other" }, { name: "Soup", price: 1.99, category: "Other" }, { name: "Cereal", price: 2.44, category: "Other" }, { name: "Pepsi", price: 1.99, category: "Beverages" } ]); // Create grouped data source var groupedProducts = products.createGrouped( function (dataItem) { return dataItem.category; }, function (dataItem) { return { title: dataItem.category }; }, function (group1, group2) { return group1.charCodeAt(0) - group2.charCodeAt(0); } ); // Expose the grouped data source WinJS.Namespace.define("ListViewDemos", { products: groupedProducts }); })(); Notice that the createGrouped() method requires three functions as arguments: groupKey – This function associates each list item with a group. The function accepts a data item and returns a key which represents a group. In the code above, we return the value of the category property for each product. groupData – This function returns the data item displayed by the group header template. For example, in the code above, the function returns a title for the group which is displayed in the group header template. groupSorter – This function determines the order in which the groups are displayed. The code above displays the groups in alphabetical order: Beverages, Fruit, Other. Creating the Group Header Template Whenever you create a ListView control, you need to create an item template which you use to control how each list item is rendered. When grouping items in a ListView control, you also need to create a group header template. The group header template is used to render the header for each group of list items. Here’s the markup for both the item template and the group header template: <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> You should declare the two templates in the same file as you declare the ListView control – for example, the default.html file. Declaring the ListView Control The final step is to declare the ListView control. Here’s the required markup: <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> In the markup above, six properties of the ListView control are set when the control is declared. First the itemDataSource and itemTemplate are specified. Nothing new here. Next, the group data source and group header template are specified. Notice that the group data source is represented by the ListViewDemos.products.groups.dataSource property of the grouped data source. Finally, notice that the layout of the ListView is changed to Grid Layout. You are required to use Grid Layout (instead of the default List Layout) when displaying grouped items in a ListView. Here’s the entire contents of the default.html page: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>ListViewDemos</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- ListViewDemos references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> <script src="/js/products.js" type="text/javascript"></script> <style type="text/css"> .product { width: 200px; height: 100px; border: white solid 1px; font-size: x-large; } </style> </head> <body> <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> </body> </html> Notice that the default.html page includes a reference to the products.js file: <script src=”/js/products.js” type=”text/javascript”></script> The default.html page also contains the declarations of the item template, group header template, and ListView control. Summary The goal of this blog entry was to explain how you can group items in a ListView control. You learned how to create a grouped data source, a group header template, and declare a ListView so that it groups its list items.

  Read the article

• Physical Directories vs. MVC View Paths

  - by Rick Strahl

  This post falls into the bucket of operator error on my part, but I want to share this anyway because it describes an issue that has bitten me a few times now and writing it down might keep it a little stronger in my mind. I've been working on an MVC project the last few days, and at the end of a long day I accidentally moved one of my View folders from the MVC Root Folder to the project root. It must have been at the very end of the day before shutting down because tests and manual site navigation worked fine just before I quit for the night. I checked in changes and called it a night. Next day I came back, started running the app and had a lot of breaks with certain views. Oddly custom routes to these controllers/views worked, but stock /{controller}/{action} routes would not. After a bit of spelunking I realized that "Hey one of my View Folders is missing", which made some sense given the error messages I got. I looked in the recycle bin - nothing there, so rather than try to figure out what the hell happened, just restored from my last SVN checkin. At this point the folders are back… but… view access  still ends up breaking for this set of views. Specifically I'm getting the Yellow Screen of Death with: CS0103: The name 'model' does not exist in the current context Here's the full error: Server Error in '/ClassifiedsWeb' Application. Compilation ErrorDescription: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.Compiler Error Message: CS0103: The name 'model' does not exist in the current contextSource Error: Line 1: @model ClassifiedsWeb.EntryViewModel Line 2: @{ Line 3: ViewBag.Title = Model.Entry.Title + " - " + ClassifiedsBusiness.App.Configuration.ApplicationName; Source File: c:\Projects2010\Clients\GorgeNet\Classifieds\ClassifiedsWeb\Classifieds\Show.cshtml    Line: 1 Compiler Warning Messages: Show Detailed Compiler Output: Show Complete Compilation Source: Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.272 Here's what's really odd about this error: The views now do exist in the /Views/Classifieds folder of the project, but it appears like MVC is trying to execute the views directly. This is getting pretty weird, man! So I hook up some break points in my controllers to see if my controller actions are getting fired - and sure enough it turns out they are not - but only for those views that were previously 'lost' and then restored from SVN. WTF? At this point I'm thinking that I must have messed up one of the config files, but after some more spelunking and realizing that all the other Controller views work, I give up that idea. Config's gotta be OK if other controllers and views are working. Root Folders and MVC Views don't mix As I mentioned the problem was the fact that I inadvertantly managed to drag my View folder to the root folder of the project. Here's what this looks like in my FUBAR'd project structure after I copied back /Views/Classifieds folder from SVN: There's the actual root folder in the /Views folder and the accidental copy that sits of the root. I of course did not notice the /Classifieds folder at the root because it was excluded and didn't show up in the project. Now, before you call me a complete idiot remember that this happened by accident - an accidental drag probably just before shutting down for the night. :-) So why does this break? MVC should be happy with views in the /Views/Classifieds folder right? While MVC might be happy, IIS is not. The fact that there is a physical folder on disk takes precedence over MVC's routing. In other words if a URL exists that matches a route the pysical path is accessed first. What happens here is that essentially IIS is trying to execute the .cshtml pages directly without ever routing to the Controller methods. In the error page I showed above my clue should have been that the view was served as: c:\Projects2010\Clients\GorgeNet\Classifieds\ClassifiedsWeb\Classifieds\Show.cshtml rather than c:\Projects2010\Clients\GorgeNet\Classifieds\ClassifiedsWeb\Views\Classifieds\Show.cshtml But of course I didn't notice that right away, just skimming to the end and looking at the file name. The reason that /classifieds/list actually fires that file is that the ASP.NET Web Pages engine looks for physical files on disk that match a path. IOW, when calling Web Pages you drop the .cshtml off the Razor page and IIS will serve that just fine. So: /classifieds/list looks and tries to find /classifieds/list.cshtml and executes that script. And that is exactly what's happening. Web Pages is trying to execute the .cshtml file and it fails because Web Pages knows nothing about the @model tag which is an MVC specific template extension. This is why my breakpoints in the controller methods didn't fire and it also explains why the error mentions that the @model key word is invalid (@model is an MVC provided template enhancement to the Razor Engine). The solution of course is super simple: Delete the accidentally created root folder and the problem is solved. Routing and Physical Paths I've run into problems with this before actually. In the past I've had a number of applications that had a physical /Admin folder which also would conflict with an MVC Admin controller. More than once I ended up wondering why the index route (/Admin/) was not working properly. If a physical /Admin folder exists /Admin will not route to the Index action (or whatever default action you have set up, but instead try to list the directory or show the default document in the folder. The only way to force the index page through MVC is to explicitly use /Admin/Index. Makes perfect sense once you realize the physical folder is there, but that's easy to forget in an MVC application. As you might imagine after a few times of running into this I gave up on the Admin folder and moved everything into MVC views to handle those operations. Still it's one of those things that can easily bite you, because the behavior and error messages seem to point at completely different  problems. Moral of the story is: If you see routing problems where routes are not reaching obvious controller methods, always check to make sure there's isn't a physical path being mapped by IIS instead. That way you won't feel stupid like I did after trying a million things for about an hour before discovering my sloppy mousing behavior :-)© Rick Strahl, West Wind Technologies, 2005-2012Posted in MVC   IIS7   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Metro: Grouping Items in a ListView Control

  - by Stephen.Walther

  The purpose of this blog entry is to explain how you can group list items when displaying the items in a WinJS ListView control. In particular, you learn how to group a list of products by product category. Displaying a grouped list of items in a ListView control requires completing the following steps: Create a Grouped data source from a List data source Create a Grouped Header Template Declare the ListView control so it groups the list items Creating the Grouped Data Source Normally, you bind a ListView control to a WinJS.Binding.List object. If you want to render list items in groups, then you need to bind the ListView to a grouped data source instead. The following code – contained in a file named products.js — illustrates how you can create a standard WinJS.Binding.List object from a JavaScript array and then return a grouped data source from the WinJS.Binding.List object by calling its createGrouped() method: (function () { "use strict"; // Create List data source var products = new WinJS.Binding.List([ { name: "Milk", price: 2.44, category: "Beverages" }, { name: "Oranges", price: 1.99, category: "Fruit" }, { name: "Wine", price: 8.55, category: "Beverages" }, { name: "Apples", price: 2.44, category: "Fruit" }, { name: "Steak", price: 1.99, category: "Other" }, { name: "Eggs", price: 2.44, category: "Other" }, { name: "Mushrooms", price: 1.99, category: "Other" }, { name: "Yogurt", price: 2.44, category: "Other" }, { name: "Soup", price: 1.99, category: "Other" }, { name: "Cereal", price: 2.44, category: "Other" }, { name: "Pepsi", price: 1.99, category: "Beverages" } ]); // Create grouped data source var groupedProducts = products.createGrouped( function (dataItem) { return dataItem.category; }, function (dataItem) { return { title: dataItem.category }; }, function (group1, group2) { return group1.charCodeAt(0) - group2.charCodeAt(0); } ); // Expose the grouped data source WinJS.Namespace.define("ListViewDemos", { products: groupedProducts }); })(); Notice that the createGrouped() method requires three functions as arguments: groupKey – This function associates each list item with a group. The function accepts a data item and returns a key which represents a group. In the code above, we return the value of the category property for each product. groupData – This function returns the data item displayed by the group header template. For example, in the code above, the function returns a title for the group which is displayed in the group header template. groupSorter – This function determines the order in which the groups are displayed. The code above displays the groups in alphabetical order: Beverages, Fruit, Other. Creating the Group Header Template Whenever you create a ListView control, you need to create an item template which you use to control how each list item is rendered. When grouping items in a ListView control, you also need to create a group header template. The group header template is used to render the header for each group of list items. Here’s the markup for both the item template and the group header template: <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> You should declare the two templates in the same file as you declare the ListView control – for example, the default.html file. Declaring the ListView Control The final step is to declare the ListView control. Here’s the required markup: <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> In the markup above, six properties of the ListView control are set when the control is declared. First the itemDataSource and itemTemplate are specified. Nothing new here. Next, the group data source and group header template are specified. Notice that the group data source is represented by the ListViewDemos.products.groups.dataSource property of the grouped data source. Finally, notice that the layout of the ListView is changed to Grid Layout. You are required to use Grid Layout (instead of the default List Layout) when displaying grouped items in a ListView. Here’s the entire contents of the default.html page: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>ListViewDemos</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- ListViewDemos references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> <script src="/js/products.js" type="text/javascript"></script> <style type="text/css"> .product { width: 200px; height: 100px; border: white solid 1px; font-size: x-large; } </style> </head> <body> <div id="productTemplate" data-win-control="WinJS.Binding.Template"> <div class="product"> <span data-win-bind="innerText:name"></span> <span data-win-bind="innerText:price"></span> </div> </div> <div id="productGroupHeaderTemplate" data-win-control="WinJS.Binding.Template"> <div class="productGroupHeader"> <h1 data-win-bind="innerText: title"></h1> </div> </div> <div data-win-control="WinJS.UI.ListView" data-win-options="{ itemDataSource:ListViewDemos.products.dataSource, itemTemplate:select('#productTemplate'), groupDataSource:ListViewDemos.products.groups.dataSource, groupHeaderTemplate:select('#productGroupHeaderTemplate'), layout: {type: WinJS.UI.GridLayout} }"> </div> </body> </html> Notice that the default.html page includes a reference to the products.js file: <script src=”/js/products.js” type=”text/javascript”></script> The default.html page also contains the declarations of the item template, group header template, and ListView control. Summary The goal of this blog entry was to explain how you can group items in a ListView control. You learned how to create a grouped data source, a group header template, and declare a ListView so that it groups its list items.

  Read the article

• A New Threat To Web Applications: Connection String Parameter Pollution (CSPP)

  - by eric.maurice

  Hi, this is Shaomin Wang. I am a security analyst in Oracle's Security Alerts Group. My primary responsibility is to evaluate the security vulnerabilities reported externally by security researchers on Oracle Fusion Middleware and to ensure timely resolution through the Critical Patch Update. Today, I am going to talk about a serious type of attack: Connection String Parameter Pollution (CSPP). Earlier this year, at the Black Hat DC 2010 Conference, two Spanish security researchers, Jose Palazon and Chema Alonso, unveiled a new class of security vulnerabilities, which target insecure dynamic connections between web applications and databases. The attack called Connection String Parameter Pollution (CSPP) exploits specifically the semicolon delimited database connection strings that are constructed dynamically based on the user inputs from web applications. CSPP, if carried out successfully, can be used to steal user identities and hijack web credentials. CSPP is a high risk attack because of the relative ease with which it can be carried out (low access complexity) and the potential results it can have (high impact). In today's blog, we are going to first look at what connection strings are and then review the different ways connection string injections can be leveraged by malicious hackers. We will then discuss how CSPP differs from traditional connection string injection, and the measures organizations can take to prevent this kind of attacks. In web applications, a connection string is a set of values that specifies information to connect to backend data repositories, in most cases, databases. The connection string is passed to a provider or driver to initiate a connection. Vendors or manufacturers write their own providers for different databases. Since there are many different providers and each provider has multiple ways to make a connection, there are many different ways to write a connection string. Here are some examples of connection strings from Oracle Data Provider for .Net/ODP.Net: Oracle Data Provider for .Net / ODP.Net; Manufacturer: Oracle; Type: .NET Framework Class Library: - Using TNS Data Source = orcl; User ID = myUsername; Password = myPassword; - Using integrated security Data Source = orcl; Integrated Security = SSPI; - Using the Easy Connect Naming Method Data Source = username/password@//myserver:1521/my.server.com - Specifying Pooling parameters Data Source=myOracleDB; User Id=myUsername; Password=myPassword; Min Pool Size=10; Connection Lifetime=120; Connection Timeout=60; Incr Pool Size=5; Decr Pool Size=2; There are many variations of the connection strings, but the majority of connection strings are key value pairs delimited by semicolons. Attacks on connection strings are not new (see for example, this SANS White Paper on Securing SQL Connection String). Connection strings are vulnerable to injection attacks when dynamic string concatenation is used to build connection strings based on user input. When the user input is not validated or filtered, and malicious text or characters are not properly escaped, an attacker can potentially access sensitive data or resources. For a number of years now, vendors, including Oracle, have created connection string builder class tools to help developers generate valid connection strings and potentially prevent this kind of vulnerability. Unfortunately, not all application developers use these utilities because they are not aware of the danger posed by this kind of attacks. So how are Connection String parameter Pollution (CSPP) attacks different from traditional Connection String Injection attacks? First, let's look at what parameter pollution attacks are. Parameter pollution is a technique, which typically involves appending repeating parameters to the request strings to attack the receiving end. Much of the public attention around parameter pollution was initiated as a result of a presentation on HTTP Parameter Pollution attacks by Stefano Di Paola and Luca Carettoni delivered at the 2009 Appsec OWASP Conference in Poland. In HTTP Parameter Pollution attacks, an attacker submits additional parameters in HTTP GET/POST to a web application, and if these parameters have the same name as an existing parameter, the web application may react in different ways depends on how the web application and web server deal with multiple parameters with the same name. When applied to connections strings, the rule for the majority of database providers is the "last one wins" algorithm. If a KEYWORD=VALUE pair occurs more than once in the connection string, the value associated with the LAST occurrence is used. This opens the door to some serious attacks. By way of example, in a web application, a user enters username and password; a subsequent connection string is generated to connect to the back end database. Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; In the password field, if the attacker enters "xxx; Integrated Security = true", the connection string becomes, Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; Intergrated Security = true; Under the "last one wins" principle, the web application will then try to connect to the database using the operating system account under which the application is running to bypass normal authentication. CSPP poses serious risks for unprepared organizations. It can be particularly dangerous if an Enterprise Systems Management web front-end is compromised, because attackers can then gain access to control panels to configure databases, systems accounts, etc. Fortunately, organizations can take steps to prevent this kind of attacks. CSPP falls into the Injection category of attacks like Cross Site Scripting or SQL Injection, which are made possible when inputs from users are not properly escaped or sanitized. Escaping is a technique used to ensure that characters (mostly from user inputs) are treated as data, not as characters, that is relevant to the interpreter's parser. Software developers need to become aware of the danger of these attacks and learn about the defenses mechanism they need to introduce in their code. As well, software vendors need to provide templates or classes to facilitate coding and eliminate developers' guesswork for protecting against such vulnerabilities. Oracle has introduced the OracleConnectionStringBuilder class in Oracle Data Provider for .NET. Using this class, developers can employ a configuration file to provide the connection string and/or dynamically set the values through key/value pairs. It makes creating connection strings less error-prone and easier to manager, and ultimately using the OracleConnectionStringBuilder class provides better security against injection into connection strings. For More Information: - The OracleConnectionStringBuilder is located at http://download.oracle.com/docs/cd/B28359_01/win.111/b28375/OracleConnectionStringBuilderClass.htm - Oracle has developed a publicly available course on preventing SQL Injections. The Server Technologies Curriculum course "Defending Against SQL Injection Attacks!" is located at http://st-curriculum.oracle.com/tutorial/SQLInjection/index.htm - The OWASP web site also provides a number of useful resources. It is located at http://www.owasp.org/index.php/Main_Page

  Read the article

• NHibernate mapping error SQL Server 2008 Express

  - by developer

  Hi All, I tried an example from NHibernate in Action book and when I try to run the app, it throws an exception saying "Could not compile the mapping document: HelloNHibernate.Employee.hbm.xml" Below is my code, Employee.hbm.xml <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" auto-import="true"> <class name="HelloNHibernate.Employee, HelloNHibernate" lazy="false" table="Employee"> <id name="id" access="field"> <generator class="native"/> </id> <property name="name" access="field" column="name"/> <many-to-one access="field" name="manager" column="manager" cascade="all"/> </class> Program.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; using NHibernate; using System.Reflection; using NHibernate.Cfg; namespace HelloNHibernate { class Program { static void Main(string[] args) { CreateEmployeeAndSaveToDatabase(); UpdateTobinAndAssignPierreHenriAsManager(); LoadEmployeesFromDatabase(); Console.WriteLine("Press any key to exit..."); Console.ReadKey(); } static void CreateEmployeeAndSaveToDatabase() { Employee tobin = new Employee(); tobin.name = "Tobin Harris"; using (ISession session = OpenSession()) { using (ITransaction transaction = session.BeginTransaction()) { session.Save(tobin); transaction.Commit(); } Console.WriteLine("Saved Tobin to the database"); } } static ISession OpenSession() { if (factory == null) { Configuration c = new Configuration(); c.AddAssembly(Assembly.GetCallingAssembly()); factory = c.BuildSessionFactory(); } return factory.OpenSession(); } static void LoadEmployeesFromDatabase() { using (ISession session = OpenSession()) { IQuery query = session.CreateQuery("from Employee as emp order by emp.name asc"); IList<Employee> foundEmployees = query.List<Employee>(); Console.WriteLine("\n{0} employees found:", foundEmployees.Count); foreach (Employee employee in foundEmployees) Console.WriteLine(employee.SayHello()); } } static void UpdateTobinAndAssignPierreHenriAsManager() { using (ISession session = OpenSession()) { using (ITransaction transaction = session.BeginTransaction()) { IQuery q = session.CreateQuery("from Employee where name='Tobin Harris'"); Employee tobin = q.List<Employee>()[0]; tobin.name = "Tobin David Harris"; Employee pierreHenri = new Employee(); pierreHenri.name = "Pierre Henri Kuate"; tobin.manager = pierreHenri; transaction.Commit(); Console.WriteLine("Updated Tobin and added Pierre Henri"); } } } static ISessionFactory factory; } } Employee.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace HelloNHibernate { class Employee { public int id; public string name; public Employee manager; public string SayHello() { return string.Format("'Hello World!', said {0}.", name); } } } App.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <configSections> <section name="hibernate-configuration" type="NHibernate.Cfg.ConfigurationSectionHandler,NHibernate"/> </configSections> <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="connection.provider">NHibernate.Connection.DriverConnectionProvider</property> <property name="connection.driver_class">NHibernate.Driver.SqlClientDriver</property> <property name="connection.connection_string"> Data Source=SQLEXPRESS2008;Integrated Security=True; User ID=SQL2008;Password=;initial catalog=HelloNHibernate </property> <property name="dialect">NHibernate.Dialect.MsSql2008Dialect</property> <property name="show_sql">false</property> </session-factory> </hibernate-configuration> </configuration>

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >