Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 554/772 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• Understanding MySQL Query Caches and when to implement it?

  - by Jeff

  On our current MySQL server query cache is enabled. Qchache_hits: 31913 Qchache_inserts: 50959 Qchache_lowmem_prunes: 9320 Qchache_not_chached: 209320 Qchache_queries_in_chace: 986 com_update: 0 com_delete: 0 I do not fully understand the Query cache - I am reading about it currently and trying to understand it. Our database holds inventory data, customer data, employee data, sales data and so forth. The query is very rarely run more than once. The possibility of a query being run twice is viewing a specific sales information twice. But basically everything in our system changes constantly. It is always being updated, deleted, insterted and off the top of my head I can't picture users running the same query twice within a week. Do I even need to have the query cache enabled? I am guessing that the inserts means 51k entries have been added, but only 986 of those are being stored? Would an idea be to refresh the cache, and watch it for a week and check how many of the queries in cached are accessed maybe on a weekly basis to see if it is actually returning any benefits? Any help/guidance on this is appreciated, thanks

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• SSH with public/private key to iMac fails.

  - by bennedich

  I'm trying to connect to my iMac (server) from my macbook (client) on my LAN. Both have Mac OS X 10.6.4. Server running on a new clean install of the OS. When just activating Remote Login in System Preferences everything works fine. But when setting up ssh to only work with public/private key I get the following error messages from the server log depending on if I use a rsa passphrase or not: With passphrase (case 1): PAM: user account has expired for <myServerUserName> from 192.168.X.X via 192.168.X.Y Without passphrase (case 2): Failed publickey for <myServerUserName> from 192.168.X.X port AAAAA ssh2 This is my setup algorithm: Create a private and public key on client with command ssh-keygen -t rsa. In case 1 I also set a passphrase. Move the id_rsa.pub to the server path /Users/<myServerUserName>/.ssh/ In this folder I execute cat id_rsa.pub > authorized_keys Making sure Remote Login isn't active, I now execute sudo /usr/sbin/sshd -d on the server. Back on the client I now type ssh -v -v -v <myServerUserName>@192.168.X.Y and get prompted to accept RSA key fingerprint. This is NOT the same fingerprint as the one from when I created the private/public key (should it be?). I accept. Depending on case: CASE 1: Client gets halted for password and the response is permission denied even though correct password is given. Back on the server I can read the error message I stated above for case 1: PAM: user account has expired... CASE 2: Client gets message Connection closed by 192.168.X.Y. Back on the server I can read the error message I stated above for case 2: Failed publickey... What could possibly cause this?

  Read the article

• Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

  - by Cyrylski

  I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

  Read the article

• Tunnell network requests with Windows 7

  - by mark

  I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

  Read the article

• Graphics card ATI Asus 9250 128 MB AGP problem.Monitor switching off.

  - by Dominick1978

  I have an old system with these specs: Motherboard: Via P4x266a (with AGP 4x) CPU: P4 1,7 Ghz Memory: 1152 MB DDR SDRAM Graphics card: Voodoo 3 2000 16 MB PSU: 300 Watt It also has 1 dvd-rom, 1 dvd-rw, 2 hard drives (all 4 connected via molex) , 1 sounblaster sound card and 1 ethernet card (both connected via pci). OS: XP Pro Recently I bought Asus 9250 128 MB AGP to replace voodoo.Wnen I switch on the pc the initial screens (until after the xp logo) sometimes are distorted with blurred colours.When XP are loaded there is some flickering but the rest are ok.XP can't recognize the card seeing it as just a VGA adapter.I have downloaded the latest xp drivers from ATI website and installed them.Then after the restart everything is ok (no distorted image or blurring) until after the xp logo.After this the monitor turns off while the pc is still running.I have tried many drivers but the problem persists (of course I removed the voodoo drivers before from the display adapter properties).Only once I have managed to enter XP (after changing BIOS features for graphics card from 256 MB to 128 MB) but the drivers on the control panel had an exclamation mark (ati 9250!) and below them ati 9250 secondary without ! under the display adapter tab and the ATI catalyst program said that it couldn;t find the card.That was the opnly time I went beyond the xp logo.Now the monitor auto switcheS off. So, what do you think? 1)Is this a broken card? 2)Is it the drivers of the card? 3)Is it PSU fault? 4)Anything else? Thanks for your help and excuse my english!

  Read the article

• iptables, forward traffic for ip not active on the host itself

  - by gucki

  I have kvm guest which's netword card is conntected to the host using a tap device. The tap device is part of a bridge on the host together with eth0 so it can access the public network. So far everything works, the guest can access the public network and it can be accessed from the public network. Now the kvm process on the host provides a vnc server for the guest which listens on 127.0.0.1:5901 on the host. Is there any way to make this vnc server accessible by the ip address which the guest is using (ex. 192.168.0.249), without interrupting the guest from using the same ip (port 5901 is not used by the guest)? It should also work when the guest is not using any ip address at all. So basically I just want to fake IP xx is on the host and only answer/ forward traffic to port 5901 to the host itself. I tried using this NAT rule on the host, but it doesn't work. Ip forwarding is enabled at the host. iptables -t nat -A PREROUTING -p tcp --dst 192.168.0.249 --dport 5901 -j DNAT --to-destination 127.0.0.1:5901 I assume this is because the IP 192.168.0.249 is not not bound to any interfaces and so no ARP requests for it get answered and so no packets for this IP arrive at the host. How can make it work? :)

  Read the article

• Website and file/directory permissions

  - by mathiass

  I've been given a task to fix this one website. One of its issues is that on one page, the images have broken links - the images are not showing, and clicking on the image (i.e. direct link to the image file) results in a 403 (Forbidden) error. I am looking for some feedback on what could be the possible cause. The directory where the images are stored has the following permissions: drwxrws--- www "group" 10240 Aug 2008 "image directory name" I had to hide the names. I checked the page source code, and everything seems to be in place. The rest of the site, and other images outside that image directory are showing fine. I was told that recently there have been some changes to the server. I'm trying to assume that there is no fault in the source code, and the permissions are - or used to be - correct (since the site has been working before, and no recent changes to the site itself have been made). My only thoughts at the moment is that either: a) the directory permission should be: drwxrws--x (executable) for the other users, or b) there is a change in the server settings that I don't know of. Is there anything else I should check?

  Read the article

• nginx root directory not forwarding correctly

  - by user66700

  The server files are store in /var/www/ Everything was working perfectly, then I've been getting the following errors 2011/01/28 17:20:05 [error] 15415#0: *1117703 "/var/www/https:/secure.domain.com/index.html" is not found (2: No such file or directory), client: 119.110.28.211, server: secure.domain.com, request: "HEAD /https://secure.domain.com/ HTTP/1.1", host: "secure.domain.com" Heres my config: server { server_name secure.domain.com; listen 443; listen [::]:443 default ipv6only=on; gzip on; gzip_comp_level 1; gzip_types text/plain text/html text/css application/x-javascript text/xml text/javascript; error_log logs/ssl.error.log; gzip_static on; gzip_http_version 1.1; gzip_proxied any; gzip_disable "msie6"; gzip_vary on; ssl on; ssl_ciphers RC4:ALL:-LOW:-EXPORT:!ADH:!MD5; keepalive_timeout 0; ssl_certificate /root/server.pem; ssl_certificate_key /root/ssl.key; location / { root /var/www; index index.html index.htm index.php; } }

  Read the article

• Using Openfire for distributed XMPP-based video-chat

  - by Yitzhak

  I have been tasked with setting up a distributed video-chat system built on XMPP. Currently my setup looks like this: Openfire (XMPP server) + JingleNodes plugin for video chat OpenLDAP (LDAP server) for storing user information and allowing directory queries Kerberos server for authentication and passwords In testing with one set of machines (i.e. only three), everything works as expected: I can log in to Openfire and it looks up the user information in the OpenLDAP database, which in turn authenticates my user with Kerberos. Now, I want to have several clusters, so that there is a cluster on each continent. A typical cluster will probably contain 2-5 servers. Users logging in will be directed to the closest cluster based on geographical location. Something that concerns me particularly is the dynamic maintenance of contact lists. If a user is using a machine in Asia, for example, how would contact lists be updated around the world to reflect the current server he is using? How would that work with LDAP? Specific questions: How do I direct users based on geographical location? What is the best architecture for a cluster? -- would all traffic need to come into a load-balancer on each one, for example? How do I manage the update of contact lists across all these servers? In general, how do I go about setting this up? What are the pitfalls in doing this? I am inexperienced in this area, so any advice and suggestions would be appreciated.

  Read the article

• Low 'Burst Rate' from SATA drive in HDTune?

  - by UpTheCreek

  I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks UPDATE: Acorting to this page on the HDTune website... An important parameter of the test is the Burst Rate. This value should always be higher than the maximum transfer rate. A lower value is usually an indication of a configuration problem. So what might be the configuration problem?

  Read the article

• mdadm: Replacing array with entirely new drives

  - by hellfur

  I have a server with three 500GB drives, with most of my data in a RAID5 configuration spanning the three of them. I just purchased and installed four 1TB drives, and the intention is to move off of the old drives and onto the new ones. I have enough SATA ports and power connectors to power all seven of my drives at once, so I've kept the old RAID running while I figure out what to do with the new drives. My question is: Should I create a whole new array on the 1TB drives, then move everything over and reconfigure linux to boot from the new md arrays? Or should I just expand the array, swapping out each of the three 500GBs with the 1TB, then adding the final drive? I've read up on the mdadm extending drive setup, and it makes sense, but I imagine I would use one of the drives as a full backup while I move things over, then add that drive back into the array once things are up and running on three of the 1TB drives, so there's some complication in going that route as well... I'm just not sure which is safer/recommended.

  Read the article

• A duplicate name has been detected on the TCP network

  - by MSedm

  When I installed my domain controller and DNS, I had 2 NIC on the server. Both NIC has its own IP address. NICs are not teamed, they are seperate and ip address are in the same subnet. Both IP address are now registered in the DNS. i found them in Forward and reverse lookup zone. Everything working ok except the following error in the event log. "A duplicate name has been detected on the TCP network......" Now I have realized that this is because of the second NIC. My question is if i disable the second NIC, what happen to those DNS record assiciated with the second ip address? How do I remove all the DNS recored for the disabled NIC? There are A record, some record with the name (same as parent folder), PTR record and may be more. How do i disable second NIC and remove all the associated DNS recoreds? Please help.

  Read the article

• Am I safe on Windows if I continue like this?

  - by max

  Of all the available tons of anti-malware software for Windows all over the internet, I've never used any paid solution(I am a student, I have no money). Since the last 10 years, my computers running Windows have never been hacked/compromised or infected so badly that I had to reformat them(of course I did reformat them for other reasons). The only program I have for security is Avast Home Edition, which is free, installed on my computers. It has never caused any problems; always detected malware, updated automatically, has an option to sandbox programs and everything else I need. Even if I got infected, I just did a boot-time scan with it, downloaded and ran Malwarebytes, scanned Autoruns logs, checked running processes with Process Explorer and did some other things and made sure I cleaned my computer. I am quite experienced and I've always taken basic precautions like not clicking suspicious executables, not going to sites which are suspicious according to WOT, and all that blah. But recently I've been doing more and more online transactions and since its 2012 now, I'm doubtful whether I need more security or not. Have I been just lucky, or do my computing habits obviate the need to use any more(or paid) security software?

  Read the article

• Which DNS settings are used when setting up server

  - by Saif Bechan

  I have a server and want to run my own name server service. Now I have set it up already and it works not, but I do not know where the exact settings are stored. On my server I use Plesk. When I edit DNS settings there I think it is stored in named.conf. Named is installed on the server, and BIND. Now I also have a panel from my registrar. This is separate from my server. Both places I can add the normal MX,A,CNAME, etc records. Now where is the best way to place this settings. Currently I have the same records on both places, on the server and at the registrar panel. I am correct to just add all the records at the registrar panel, and remove everything from within PLESK, and just don't run DNS on my server, because it is already done in the registrar panel. Or should I add the records in both places.

  Read the article

• How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

  - by Enigma83

  I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

  Read the article

• How to stop split tunnelling over cisco VPN (OS X)?

  - by Notre

  I'm using OS X (Snow Leopard) and the built in Cisco IP Sec client to connect to my corporate VPN. Currently, everything works as designed, and desired for most people. However, I would like to be able to funnel all traffic (particularly all web browser traffic) through the VPN. (Note - I'm an end user here, not the network administrator). Is this possible? In searching around, most people are looking to do the opposite; break out the VPN and enable split tunnelling of data. I'd like to avoid the split tunnelling. Is there some setting I can make in my OS X client to make this happen? I ran across a post where routing table changes are made to force split tunnelling: how to force split tunnel routing on mac -> cisco vpn I'm thinking something similar to that might work, but I'm not a networking expert so I'm not sure where to start (or if it is even possible). Thank you! Notre

  Read the article

• Is there an simple but good To Do Manager app for the Mac?

  - by Another Registered User

  Every morning I think about what I am going to do today. So I take a paper and start to write things like: [ ] Call Mr. XYZ [ ] Answer Support E-Mails [ ] Reduce website header height by 20 px [ ] Create new navigation bar icons And every time I'm done with something, I paint a checkmark in this square. On paper. It would be fun to have something like this as an application. But I don't want a heavy project management tool or integration with email. It should be like download, install, use without fat configuration and steep learning curve. usually I don't schedule my to do's, I just write down every day what I want to accomplish today. For my experience it doesn't make sense to plan what to do next week, because next week everything looks totally different. Would be cool if such a simple utility exists. At the moment I try just using textEdit and deleting rows which are done. With a nice interface, this would be much more fun.

  Read the article

• Determine which user initiated call in Asterisk

  - by adaptive

  I had the following code in my extensions.conf file: [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) Now I want to change this code to set the CallerID and number based on the user/extension that is making the call. In fact I have four(4) users/extensions in my sip.conf and only one of them (the one I use for business) is supposed to send a different caller id/number. Everything is in the same context (for simplicity) since all lines need to be able to pick up an incoming call. The only difference is when line1 needs to make a call, it has to send a different caller id/number and use a different provider. This is what I have so far: [local] exten => _NXXNXXXXXX,1,Set(line=${SIP_HEADER(From)}) exten => _NXXNXXXXXX,n,Verbose(line variable is <${line}>) exten => _NXXNXXXXXX,n,Set(CALLERID(name)=${IF($[ ${line} = line1 ]?${COMPANY_NAME}:${FAMILY_NAME})}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${IF($[ ${line} = line1 ]?${COMPANY_NUMBER}:${FAMILY_NUMBER})}) exten => _NXXNXXXXXX,n,Dial(${IF($[ ${line} = line1]?SIP/${EXTEN}@${COMPANY_PROVIDER}:SIP/${EXTEN}@${FAMILY_PROVIDER})}) I really don't know if this is correct and I'm afraid to commit these changes to my extensions.conf before validating. Any help will be greatly appreciated.

  Read the article

• Windows 7 - "Magic" frequent folder

  - by TheAdamGaskins

  Every week, I export an mp3 file from audacity into a folder with that day's date (e.g. this past sunday I exported the file to a folder named 20130609). Then I close everything and that's it for a while. Then, I come back a few hours later to upload the file to ftp. I usually have some folders open, so to open a new one, I right click on the folder icon on the taskbar... to open a new folder window and browse to this folder I just created, right? Well I look up a little bit and: So I click it and upload the file, and it actually saves me 30 seconds, which is really awesome... but what in the world? It happens every single week without fail. I create the folder inside the audacity export window. The folder stays on the frequent list until I create a new folder the following week. This was definitely not an advertised feature of Windows 7, and it's extremely handy... but it really just seems like magic to me. How does it work?

  Read the article

• How can I restore the registry keys from another C drive? (Windows 7 64bit)

  - by graham3d

  I ran Uniblue registry booster on my system which was working fine. It did a full back up of the registry keys. Now I cannot boot from that disk. I also cannot get into the BIOS! To restore the registry I have to run Uniblue registry booster from within windows. I cannot get there. I can boot up on another C drive, and can see the files on the drive with the problem. Is there any way I can find the Registry Booster backup files and restore it from the other disk? Or find the registry backup and upload it into the registry so I can boot off the other disk again? Or, Can I do a windows repair from the other disk? NB: not getting in to the bios means I cannot boot off the CD/DVD! (I can use the DVD drive from within windows) Any ideas? I do not want to reinstall everything yet again, it takes about 6 hours.

  Read the article

• Network outage caused by SMC8013WG Cable Modem/Router ?

  - by mkocubinski

  At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

  Read the article

• Routing Traffic With OpenVPN

  - by user224277

  Few minutes ago i configured my VPN server, and actually I can connect to my VPN but all trafic is going through my normal home network. On my OpenVPN application I've got an information : Server IP: **.185.***.*10 Client IP: 10.8.0.6 Traffic: 7.3 KB in, 5.6 KB out Connected: 10 June 2014 19:21:59 So everything is connected but how I can setup on windows 7 that all trafic have to go through OpenVPN network card ?? Client setting : client dev tun proto udp # enter the server's hostname # or IP address here, and port number remote **.185.***.*10 1194 resolv-retry infinite nobind persist-key persist-tun # Use the full filepaths to your # certificates and keys ca ca.crt cert user1.crt key user1.key ns-cert-type server comp-lzo verb 6 Server setting : port 1194 proto udp dev tun # the full paths to your server keys and certs ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh2048.pem cipher BF-CBC # Set server mode, and define a virtual pool of IP # addresses for clients to use. Use any subnet # that does not collide with your existing subnets. # In this example, the server can be pinged at 10.8.0.1 server 10.8.0.0 255.255.255.0 # Set up route(s) to subnet(s) behind # OpenVPN server push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" ifconfig-pool-persist /etc/openvpn/ipp.txt keepalive 10 120 status openvpn-status.log verb 6 and sysctl : net.ipv4.ip_forward=1 Thank you for your time and help.

  Read the article

• How to find the reason for a weekly downtime on an Ubuntu web server hosted by AWS?

  - by IceSheep

  We started monitoring our web server using Pingdom and found out that we have a downtime of a few minutes every Sunday at 0:00 UTC. The test runs every minute and checks if a successful HTTP response (code 200) is returned on port 80. The test fails due to a timeout (no response after 30 seconds). Here's what we've already checked – without success: Since we run our webserver behind a load balancer, I've set the Pingdom test on the load balancer's public DNS and the webserver's public DNS in order to find out if there's a problem with the AWS load balancer – both tests return the same result We set up Munin on our webserver. Everything looked fine even after the failure. Since the last failure lasted only 2 minutes I suppose Munin couldn't capture a potential problem (it only checks every 5 minutes) I have checked /var/log/apache2/error.log and /var/log/syslog for suspicious entries I have checked /etc/cron.weekly and /etc/crontab for suspicious entries I have searched for files created or last-modified during 0:00 and 0:15 using this method: touch -t 201209020000 start touch -t 201209020015 end find / -newer start -and ! -newer end (nothing found) Has anybody experienced a similar problem? Any proposals on how to find the reason for this behavior? It's Ubuntu 10.04 LTS running on an AWS m1.large instance. Thanks!

  Read the article

• 2.6.9 Kernel on virtual server (non upgradable) - any expected problems?

  - by chris_l

  Hi, I'm considering to rent a virtual server (for me personally). The product I'm currently looking at offers IMO fair pricing, very good hardware etc. The only problem is, that I won't be able to do an upgrade to a newer kernel than 2.6.9 (running Debian Etch). Also, I can't install my own kernel modules. (The server runs with Virtuozzo, so as far as I understand it, it just does some chroot instead of a real virtualization (?)) I want to run GlassFish, Postgres, Subversion, Trac and maybe some other things on it. It will also have to employ a firewall, and provide OpenSSL for https. Ideally, it would also be able to do AIO (asynchronous IO), which could speed up some server I/O. Should I expect problems with that old kernel version, in conjunction with the software I want to install (I'd like to use current versions of the software)? One thing I already found out, is that you can't do everything with iptables, since some kernel modules are missing/things are not build into the kernel. GlassFish v3 appears to run fine at first glance. I was able to test the server for a few hours. Installing my whole setup wasn't feasible in that time, but what I can say is, that it's amazingly fast for an entry-level vserver, especially hard disk and network performance (averaging at ca. 400MBit/s). So if the kernel won't be a problem, I'd really like to take it. Thanks, Chris PS Exact kernel version: 2.6.9-023stab051.3-smp

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >