jms request reply - Page 554

I need a reverse proxy solution for SSH

- by Bond

Hi here is a situation I have a server in a corporate data center for a project. I have an SSH access to this machine at port 22.There are some virtual machines running on this server and then at the back of every thing many other Operating systems are working. Now Since I am behind the data centers firewall my supervisor asked me if I can do some thing by which I can give many people on Internet access to these virtual machines directly. I know if I were allowed to get traffic on port other than 22 then I can do a port forwarding. But since I am not allowed this so what can be a solution in this case. The people who would like to connect might be complete idiots.Who may be happy just by opening putty at their machines or may be even filezilla.I have configured an Apache Reverse Proxy for redirecting the Internet traffic to the virtual machines on these hosts.But I am not clear as for SSH what can I do.So is there some thing equivalent to an Apache Reverse Proxy which can do similar work for SSH in this situation. I do not have firewall in my hands or any port other than 22 open and in fact even if I request they wont allow to open.2 times SSH is not some thing that my supervisor wants.

Read the article

Fedora 15: em1 recently dissapeared and hostapd no longer serves internet to wirelessly connected devices

- by Daniel K

I have a laptop running hostapd, phpd, and mysql. This laptop uses an Ethernet connection to connect to the internet and acts as a wireless access point for my workplace's wifi devices. After installing some software and reconnecting my Ethernet elsewhere, my "em1" device is no longer present and wirelessly connected devices can no longer reach the internet. The software I recently installed is: pptp, pptpd, and updated some fedora libraries. I have also recently moved my desk and laptop to another location and thus had to reconnect the Ethernet elsewhere. Wifi devices no longer have access to the internet. Wirelessly connected devices are able to successfully log into the laptop, showing full strength, correct SSID, and uses the proper password. However, when I tried to connect to a site like google, the request times out. The device "em1" also no longer appears on my machine. Running: # ifup em1 will give me the following output: ERROR : [/etc/sysconfig/network-scripts/ifup-eth] Device em1 does not seem to be present, delaying initialization. And running: # dhclient em1 has the following output: Cannot find device "em1" When I run # dmesg|grep renamed, I get the following: renamed network interface eth0 to p4p1. I've tried to connect to the internet through p4p1 directly from the laptop and was successful. However, my wireless devices connected to my laptop are not able to connect to the internet. I have uninstalled pptp and pptpd using # yum erase ... but the problem still persists. To install pptp I used: # yum install pptp To install pptpd I did the following: # rpm -Uvh http://poptop.sourceforge.net/yum/stable/fc15/pptp-release-current.noarch.rpm # yum install pptpd To update my fedora libraries I used: # yum check-update # yum update EDIT: Running # route produces the following results: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.11.200.1 0.0.0.0 UG 0 0 0 p4p1 10.11.200.0 * 255.255.252.0 U 0 0 0 p4p1 172.16.100.0 * 255.255.255.0 U 0 0 0 wlan0

Read the article

IIS 7.5 truncating POST body containing JSON data with ASP.NET MVC 3

- by Guneet Sahai

I'm facing a problem which I hope is a configuration thing with IIS but is right now giving a lot of trouble. Basically I have a controller that accepts a JSON and does some processing. While it generally works fine, but every now and then when the system has some load I get an error. After some painful debugging, we figured the incoming JSON gets truncated which causes the deserialzer to fail. To narrow down the problem - we wrote a simple controller that accepts a JSON and tries to deserialize it. In case it fails it just logs it. This works fine but when I hit it using a load testing tool (JMeter) it throws the same error (truncation) for a few requests. The # of failures increased when I increase parallel connections. It starts showing with 150 concurrent requests. We are running IIS 7 on windows 2008 server with ASP.Net MVC 3 with more or less default configuration of IIS. More information available in my question below http://stackoverflow.com/questions/12662282/content-length-of-http-request-body-size

Read the article

Server not accepting uploads

- by Tatu Ulmanen

I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

Read the article

IIS replication - Is it possible

- by Ian

Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

Read the article

Why we can change our IP address?

- by iamstupid

I across some websites that offer change of our IP addresses. It says, we can surf net anonymously, including changing our IP address and location. Most of the softwares are not free, so I have not try it out yet. But my question is, so, IP addresses will no longer be unique or valid for identify which computer were sending/request the information? I though only the ISP can determine our IP, so we can change our IP from some commercial softwares huh? Case: If I change my IP address, I go to a website which is supposed to be banned by my country, will the ISP let me pass the check and I will be able to browse the website which should be blocked? another question: From what I know, if we want to go to certain website, here is the flow: My Computer = ISP = Website = ISP = My computer I am not sure, if its the correct flow, but I am sure that, whichever website I want to visit, I need to go through my ISP, isnt it?. So if we change out IP, our ISP will record our new IP or the original(assigned-by-ISP) IP? Sorry for my bad English.

Read the article

Denying access to website via htaccess based on http header

- by neekster

I've been trying for ages to get this to work and I can't put my finger on it. What I'm trying to do is block access to a site from a number of countries, based on the CF-IPCountry header added by CloudFlare. I figured htaccess was a suitable way to do this. We are running LiteSpeed 4.2.4 on top of DirectAdmin for a control panel. The problem we having is the htaccess rule doesn't seem to do anything. Here's the rule we tried: SetEnvIf CF-IPCountry AU UnwantedCountry=1 Order allow,deny Deny from env=UnwantedCountry Allow from all That makes no difference at all, connections are still accepted. Just to check that the rule was at least being processed, I changed Allow from all to Deny from all, and connections were refused. So it appears to be a problem wit the variable. Here's the relevant headers that come in with the request. Connection: Keep-Alive Accept-Encoding: gzip CF-Connecting-IP: xx.xx.xx.xx CF-IPCountry: AU X-Forwarded-For: xx.xx.xx.xx.xx CF-RAY: c9062956e2d04b6 X-Forwarded-Proto: http CF-Visitor: {"scheme":"http"} Zone-Name: xx.com.au Hopefully someone can help me out, this has been driving me nuts for too long. Thanks

Read the article

Router reporting failed admin login attempts from home server

- by jeffora

I recently noticed in the logs of my home router that it relatively regularly lists the following entry: [admin login failure] from source 192.168.0.160, Monday, June 20,2011 18:13:25 192.168.0.160 is the internal address of my home server, running Windows Home Server 2011. Is there anyway I can find out what specifically is trying to login to the router? Or is there some explanation for this behaviour? (not sure if this belongs here or on superuser...) [Update] I've run both Wireshark and netmon for a while on my home server. Wireshark captured the traffic, but didn't really show anything useful (or nothing I could make use of). A simple HTTP GET request is sent from the server (192.168.0.160) to the router (192.168.0.1), from a seemingly random port (I've seen examples from 50068, 52883), and it appears to do it twice in quick succession (incrementing port by 1), about every hour. Running netstat around the time of the failure didn't show anything (probably too long after anyway). I tried using netmon as it categorises by process, so I thought it might show a corresponding process for the port. Unfortunately, this comes in under the 'unknown' category, meaning it's basically just a slower, less useful Wireshark. I know there's not much to go on here, but does this help in anyway?

Read the article

Strange 400 error with IIS 7.5 and a webservice?

- by Juw

Ok, this is a longshot. I have been pondering this for hours. I have no clue how to solve this. But maybe someone here can recognize the problem and point me to right direction. I have an IIS 7.5 server and a MSSQL database on a different server. On the IIS server there is a webservice that communicates with the MSSQL server. The problem is that when there is data that the MSSQL server needs to send back to the webservice and the webservice delivers that back to the webbrowser (JSON) i get a 400 error. Looking through the logs for the IIS there is just a 400....nothing more. When i put in a call to the service in my browsers URL field i get this: "The server encountered an error processing the request. Please see the service help page for constructing valid requests to the service." There is NOTHING wrong with how i call the webservice. It has worked before on a different server (a dev server). Do someone have a clue on what this can be about? 400 means malformed URL...it isn´t. And why is that when there are no data to return to the user...everything works. But when there is data fetched from the MSSQL DB...the 400 error shows up. Hope someone have some tips how to solve it. Thanx in advance.

Read the article

_default_ VirtualHost overlap on port 443, the first has precedence

- by Mohit Jain

I have two ruby on rails 3 applications running on same server, (ubuntu 10.04), both with SSL. Here is my apache config file: <VirtualHost *:80> ServerName example1.com DocumentRoot /home/me/example1/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example1.com DocumentRoot /home/me/example1/production/current/public SSLEngine on SSLCertificateFile /home/me/example1/production/shared/example1.crt SSLCertificateKeyFile /home/me/example1/production/shared/example1.key SSLCertificateChainFile /home/me/example1/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> <VirtualHost *:80> ServerName example2.com DocumentRoot /home/me/example2/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example2.com DocumentRoot /home/me/example2/production/current/public SSLEngine on SSLCertificateFile /home/me/example2/production/shared/iwanto.crt SSLCertificateKeyFile /home/me/example2/production/shared/iwanto.key SSLCertificateChainFile /home/me/example2/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> Whats the issue: On restarting my server it gives me some output like this: * Restarting web server apache2 [Sun Jun 17 17:57:49 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence ... waiting [Sun Jun 17 17:57:50 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence On googling why this issue is coming I got something like this: You cannot use name based virtual hosts with SSL because the SSL handshake (when the browser accepts the secure Web server's certificate) occurs before the HTTP request, which identifies the appropriate name based virtual host. If you plan to use name-based virtual hosts, remember that they only work with your non-secure Web server. But not able to figure out how to run two ssl application on same server. Can any one help me?

Read the article

How can I prevent Apache from asking for credentials on non SSL site

- by Scott

I have a web server with several virtual hosts. Some of those hosts have an associated ssl site. I have a DirectoryMatch directive in my main config file which requires basic authentication to any directory with secured as part of the directory path. On sites that have an SSL site, I have a rewrite rule (located in the non ssl config for that site), that redirects to the SSL site, same uri. The problem is the http (80) site asks for credentials first, and then the https (443) site asks for credentials again. I would like to prevent the http site from asking and thus avoid the potential for someone entering credentials and having them sent in clear text. I know I could move the DirectoryMatch down to the specific site, and just put the auth statement in the SSL config, but that would introduce the possibility of forgetting to protect critical directories when creating new sites. Here are the pertinent declarations: httpd.conf (all sites): <DirectoryMatch "_secured_"> AuthType Basic AuthName "+ + + Restrcted Area on Server + + +" AuthUserFile /home/websvr/.auth/std.auth Require valid-user </DirectoryMatch> site.conf (specific to individual site) <DirectoryMatch "_secured_"> RewriteEngine On RewriteRule .*(_secured_.*) https://site.com/$1 </DirectoryMatch> Is there a way to leave DirectoryMatch in the main config file and prevent the request for authorization from the http site? Running Apache 2 on Ubuntu 10.04 server from the default package. I have AllowOverride set to none - I prefer to handle things in the config files instead of .htaccess.

Read the article

How do I stop linux from trying to mount android phone as usb storage?

- by user1160711

When I plug in my Motorola Triumph to my fedora 17 linux box USB port, I get an endless series of errors on the linux box as it desperately attempts to mount the phone as a USB drive. Stuff like this: Jun 23 10:26:00 zooty kernel: [528926.714884] end_request: critical target error, dev sdg, sector 4 Jun 23 10:26:00 zooty kernel: [528926.715865] sd 16:0:0:1: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 23 10:26:00 zooty kernel: [528926.715869] sd 16:0:0:1: [sdg] Sense Key : Illegal Request [current] Jun 23 10:26:00 zooty kernel: [528926.715872] sd 16:0:0:1: [sdg] Add. Sense: Invalid field in cdb Jun 23 10:26:00 zooty kernel: [528926.715876] sd 16:0:0:1: [sdg] CDB: Read(10): 28 20 00 00 00 00 00 00 04 00 If I go ahead and tell the phone to allow linux to mount the USB storage, the messages stop, and I get a mounted drive, but if all I want to do is use the debug bridge, my log on linux will continue to fill with this junk. Is there some udev magic I can do to make the system ignore this particular device as far as usb storage goes? I just noticed that if I tell the phone to enable USB storage, let linux recognize the new disk, then tell the phone to disable USB storage again, I get one additional log message about capacity changing to zero, but the endless spew of messages stops, so I guess one work around is to enable and disable USB right away.

Read the article

Setup windows 2012 AD in Hyper-V for a Test environment

- by hub

Im trying to setup a Windos 2012 R2 test environment on my work computer (a laptop). I have a AD, DHCP and DNS server on server A, and a client connecting to the doman and that works. The client can ping the AD server and gets a valid IP adress. If I ping google.com from the client I get the IP adress but I dont get any responses (request time out). If i ping google.com from server A it works as it should. Server A have a connection to the Internet through a "external network switch" in hyper-v, which gets its internet from a router and the client is connected to a "internal network switch". May the poblem be that server A is behind a router? Can I make this solution to work regadless the network my laptop is connected to? At home i have one IP adress, at work its a totally different range. What I would like is to use my laptops internet connection, regardless wifi or wired, to act as incomming internet, is this possible?

Read the article

Updating WordPress 3.6 to 3.7 via admin area on Nginx VPS hangs and fails

- by harryg

So I have a few WordPress sites running on my VPS (Ubuntu 12.10, Nginx, php-fpm 5.4) The sites are all on seperate vhosts and use their own config files (albeit similar to each other) and vary in complexity. One is very simple and uses minimal plugins. When I try to update core on any site via the admin area I click the "Update Now" button (which should run the script in wp-admin/update-core.php the page hangs for a minute or two before going to a blank admin page (i.e. the wp-admin menu bars and header bar are there but there is no content in the body of the page). Visiting another admin page via the still menu bar reveals that the core has not been updated. Checking the error log I see this entry: 2013/10/29 23:20:48 [error] 9384#0: *5318248 upstream timed out (110: Connection timed out) while reading upstream, client: --.---.--.---, server: www.mysite.com, request: "POST /wp-admin/update-core.php?action=do-core-upgrade HTTP/1.1", upstream: "fastcgi://unix:/var/run/php5-fpm.sock:", host: "mysite.com", referrer: "http://mysite.com/wp-admin/update-core.php" This didn't happen in the past on older updates and the rest of the site including updating plugins works fine. Any ideas? Could it be as simple as a time-out error? I find that unlikely as the server should munch though a wp upgrade in seconds.

Read the article

CC.NET + SVN : Server certificate issue

- by MSI

I am trying to setup Continuous Integration in our office. Being a puny little developer I am facing this supposedly infamous problem: " Source control operation failed: svn: OPTIONS of 'https://trunkURL': Server certificate verification failed: issuer is not trusted" So I tried the following solution - Run CC.NET service (server running as win service) using a domain account (rather than default LOCAL SYSTEMS) and accept cert permanently using command prompt under that user by using svn log/list on the repo. Doesn't help :(. I am getting the following from my artifact/log files(or dashboard) ThoughtWorks.CruiseControl.Core.CruiseControlException: Source control operation failed: svn: OPTIONS of 'https://TrunkURL': Server certificate verification failed: issuer is not trusted (https://ServerAdd) . Process command: E:\(svn.exe Path) log https://TrunkURL -r "{2010-11-08T02:12:20Z}:{2010-11-08T02:13:21Z}" --verbose --xml --no-auth-cache --non-interactive at ThoughtWorks.CruiseControl.Core.Sourcecontrol.ProcessSourceControl.Execute(ProcessInfo processInfo) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.Svn.GetModifications(IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.QuietPeriod.GetModificationsWithLogging(ISourceControl sc, IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.QuietPeriod.GetModifications(ISourceControl sourceControl, IIntegrationResult lastBuild, IIntegrationResult thisBuild) at ThoughtWorks.CruiseControl.Core.IntegrationRunner.GetModifications(IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.IntegrationRunner.Integrate(IntegrationRequest request) We are using VisualSVN Server and CC.NET for this adventure. Tips, suggestions will be highly appreciated. Thanks

Read the article

JBoss https on port other than 8080 not working

- by MilindaD

We have a server with two JBoss instances where one runs on 8080, the other on 8081. We need to have HTTPS enabled for the 8081 server, firstly we tried enabling https on the 8080 port instance by generating the keystore and editing the server.xml and it successfully worked. However when we tried the same thing for 8081 it did not, note that we removed https for the 8080 server first before enabling it for 8081. This is what was used for both server.xml for 8080 and 8081. The only difference was that the port was changed from 8080 to 8081 when trying to enable https for 8081 port instance. What am I doing wrong and what needs to be changed? NOTE : When I meant enabled for 8080 I meant when you visit https:// URL:8484 you will actually be visiting the 8080 port instance. However when ssl is enabled for 8081 and I visit https:// URL:8484 I get that the web page is unavailable. COMMENTLESS VERSION <Server> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/> <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1"> <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" /> <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" > <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" /> <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server> WITH COMMENTS VERSION <Server>  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Service name="jboss.web">  <Connector port="8080" address="${jboss.bind.address}" maxThreads="350" maxHttpHeaderSize="8192" emptySessionPath="true" protocol="HTTP/1.1" enableLookups="false" redirectPort="8443" acceptCount="100" connectionTimeout="20000" disableUploadTimeout="true" compression="on" ompressableMimeType="text/html,text/css,text/javascript,application/json,text/xml,text/plain,application/x-javascript,application/javascript"/>   <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" address="${jboss.bind.address}" keystoreFile="${jboss.server.home.dir}/conf/supun1.keystore" keystorePass="aaaaaa" truststoreFile="${jboss.server.home.dir}/conf/supun1.keystore" truststorePass="aaaaaa" />  <Connector port="8009" address="${jboss.bind.address}" protocol="AJP/1.3" emptySessionPath="true" enableLookups="false" redirectPort="8443" /> <Engine name="jboss.web" defaultHost="localhost" jvmRoute="khms1">  <Realm className="org.jboss.web.tomcat.security.JBossSecurityMgrRealm" certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping" allRolesMode="authOnly" />  <Host name="localhost" autoDeploy="false" deployOnStartup="false" deployXML="false" configClass="org.jboss.web.tomcat.security.config.JBossContextConfig" >        <Valve className="org.jboss.web.tomcat.service.sso.ClusteredSingleSignOn" />  <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" transactionManagerObjectName="jboss:service=TransactionManager" /> </Host> </Engine> </Service> </Server>

Read the article

Windows VirtualBox failed to attach USB device to Linux Guest

- by joltmode

I have Windows 7 64bit Host system, and I am using VirtualBox 4.1.18 (r78361). I have an Arch Linux Guest OS. I have installed VirtualBox Extension Pack (to enable USB2 support) and added my USB device filter to VM. I have also installed the Guest Additions provided by Arch: virtualbox-archlinux-additions (but I have no idea whether it's actually needed for my environment). I can see my USB device from VirtualBox Devices menu. Whenever I am trying to access it, I end up with: Failed to attach the USB device Kingston DT 100 G2 [0100] to the virtual machine Archlinux. USB device 'Kingston DT 100 G2' with UUID {a836ec33-0f41-4ca7-a31d-09cceaf5d173} is busy with a previous request. Please try again later. Details ? Result Code: E_INVALIDARG (0x80070057) Component: HostUSBDevice Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a} Callee: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} From what I have googled, most guides shows how to solve this the other way around - Linux Host to Windows Guest. How do I resolve this? Update I have tried to Eject (virtually, not physically) the device from my Windows Host system and then try to access the Device from Guest. Same error.

Read the article

Exchange 2003 - how to route ALL mail (including internal) via an external SMTP gateway? (Or, domain

- by Scandalon

Short version: Is there a way to have Exchange route all email, including internal AD users that would normally be routed directly, through an external gateway? (SMTP, probably a "Smart Host" in exchange nomenclature.) Longer version: I'm not an email expert/admin/orevencompetent. Inherited an exchange 2003 server, migrating to web-based SaaS provider. To add to the fun, we're also (forced by deadlines) transitioning domains. What we (my boss) wants is any email sent to the new domain to have a copy sent to both domains. Getting mail sent to the new domain/provider to then be copied/forwarded to our old domain/exchange is easy. But we want mail sent from the old domain to the old domain to get sent to the new domain as well. However: If we route all outgoing exchange mail through the new provider gateway, w/ the new domain forwarding to the old, we'd get an email loop. The "solution" desired is for an exchange user that sends to another exchange user to still be sent via the external gateway, which would in turn be sent to the new domain, and copied/forwarded back to the old domain. Is it possible? A bit of a strange request I'm sure. And I expect that what we're attempting to do is DoingItWrong(tm). Any better ideas?

Read the article

ssh-add insists on passphrase

- by Sam Walton

I have a new ssh key problem. I have successfully used them for years with Heroku, Git and other servers so I can login without having to issue a passphrase. A few weeks ago, I was unable to push a git repository on my machine to my Heroku and it responded with Permission denied (publickey). Hmm. Everything else but this Heroku function still works. So I ssh-keygen -t rsa -C "newHeroku" with no passphrase (hit return so it would be empty). So I enter: sudo chmod 600 ~/.ssh/newHeroku* Then: ssh-add ~/.ssh/newHeroku.pub Returning return for the passphrase asked it exits without error. The next step is to: ssh-add /Users/sam/.ssh/newHeroku.pub To verify that it's "live" I enter: ssh-add -l To which the output is still The agent has no identities. Okay, to eliminate variables, I repeat the key generation process but entering in a passphrase for a new key. I ssh-add the new key and get the "Enter passphrase" as expected. Now this is why I'm posting here and not on a Heroku blog because ssh-add fails because the passphrase I used keeps getting rejected. It appears, even though I have no problem with my keys elsewhere, that something is wrong with passphrase because even though I get no errors, I get errors when on the one that expects a passphrase. One question, should I expect the Passphrase request for ssh-add when I have not generated a passphrase? It's been suggested that this is a clue and I offer it. Or maybe I have a poor understanding of what ssh-add is doing. Wouldn't be the first time I asked a stupid Q. Also, I'm on Lion and have updated no system updates in the few weeks of this period except application updates.

Read the article

installing mod_wsgi giving 403 error

- by John Smiith

installing mod_wsgi giving 403 error httpd.conf i added code below WSGIScriptAlias /wsgi "C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py" <Directory "C:/xampp/www/htdocs/wsgi_app/"> AllowOverride None Options None Order deny,allow Allow from all </Directory> wsgi_handler.py status = ‘200 OK’ output = ‘Hello World!’ response_headers = [('Content-type', 'text/plain'), ('Content-Length', str(len(output)))] start_response(status, response_headers) return [output] Note: localhost is my virtual host domain and it is working fine but when i request http://localhost/wsgi/ got 403 error. <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:/xampp/www/htdocs/localhost" ServerName localhost ServerAlias www.localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" combined </VirtualHost> Error log [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:54 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] Options ExecCGI is off in this directory: C:/xampp/www/htdocs/wsgi_app/wsgi_handler.py [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] File does not exist: C:/xampp/www/htdocs/localhost/favicon.ico [Wed Jul 04 06:01:58 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/xampp/Bin/apache Note: My apache is not in c:/xampp/bin/apache it is in c:/xampp/bin/server-apache/

Read the article

Can varnish cache files without specific extension or residing in specific directory

- by pataroulis

I have a varnish installation to cache (MANY) images that my service serves. It is about 200 images of around 4k per second and varnish happily serves them according to the following rule: if (req.request == "GET" && req.url ~ "\.(css|gif|jpg|jpeg|bmp|png|ico|img|tga|wmf)$") { remove req.http.cookie; return(lookup); } Now, the thing is that I recently added another service on the same server that creates thumbnails to serve but it does not add a specific extension. The files are of the following filename pattern: http://www.example.com/thumbnails/date-of-thumbnail/xxxxxxxxx.xx where xx are numbers, so xxxxxxxxx.xx could be 6482364283.73 (two numbers at the end) (actually this is the timestamp so I can keep extra info in the filename) That has the side effect that varnish does not cache them and I see them constantly being served by apache itself. Even though I can change the format from now on to create thumbs ending in .jpg, is there a way to change the vcl file of my varnish daemon to either cache everything under a directory (the thumbnails directory) or everything with two numbers at its extension? Let me know if I can provide any additional info ! Thanks!

Read the article

nginx: Rewrite PHP does not work

- by Ton Hoekstra

I've a Suffix Proxy installed and I'm using the following rewrite with wildcard subdomain DNS on: location / { if (!-e $request_filename) { rewrite ^(.*)$ /index.php last; break; } } My suffix proxy has the following URL format: (subdomain and/or domain + domain extension to proxy).proxy.org/(request-uri to proxy) I've this php code in my index.php: if(preg_match('#([\w\.-]+)\.example\.com(.+)#', $_SERVER['SERVER_NAME'].$_SERVER['REQUEST_URI'], $match)) { header('Location: http://example.com/browse.php?u=http://'.$match[1].$match[2]); die; } But when requested a page with a .php extension I'll get a 404 not found error: http://www.php.net.proxy.org/docs.php - HTTP/1.1 404 Not Found http://www.utexas.edu.proxy.org/learn/php/ex3.php - HTTP/1.1 404 Not Found But everything else is working (also index.php is working): http://php.net.proxy.org/index.php - HTTP/1.1 200 OK http://www.php-scripts.com.proxy.org/php_diary/example2.php3 - HTTP/1.1 200 OK http://www.utexas.edu.proxy.org/learn/php/ex3.phps - HTTP/1.1 200 OK http://www.w3schools.com.proxy.org/html/default.asp - HTTP/1.1 200 OK Somebody has an answer? I don't know why it's not working, on apache it's working fine. Thanks in advance. I've removed the location and now it's working perfectly: if (!-e $request_filename) { rewrite ^(.*)$ /index.php last; break; }

Read the article

web.config file changings guide

- by Student

Hi experts how are you all? i am student, and learning asp.net c# visual studio 2010 with using sql server 2005. I have developed a website which has database. I developed this website with self studies taking help from internet. the website is completed and working perfectly in my computer. I have hosting server and domain name registered already. the problem is when I upload my website it doesn't work there the following error displays: Server Error in '/' Application. Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. Source Error: Line 11: <system.web> Line 12: <customErrors mode="Off" /> Line 13: <compilation debug="false" targetFramework="4.0"/> Line 14: </system.web> Line 15: </configuration> Source File: C:\Inetpub\vhosts\urdureport.com\httpdocs\web.config Line: 13 Version Information: Microsoft .NET Framework Version:2.0.50727.5472; ASP.NET Version:2.0.50727.5474 I don't know what should I do to get it work on hosting server please help me in this regard that what should I do with this. Thank you in advance

Read the article

Apache: How to enable Directory Index browsing at the Doc Root level?

- by Brian Lacy

I have several web development projects running on Fedora 13. I generally setup Apache to serve my larger projects as Virtual Hosts, but I've got several small projects cycling through that I don't really care to setup a VirtualHost for each one. Instead I'd like them all under a subdirectory of the main VirtualHost entry. I just want Apache to serve me the directory index when I browse to the host name. For example, the hostname projects.mydomain.com refers to /var/www/projects, and that directory contains only subdirectories (no index file). Unfortunately when I browse to the host directly I get: Forbidden You don't have permission to access / on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request. But my virtual host entry in my apache config looks like this: <VirtualHost *> ServerName projects.mydomain.com DocumentRoot /var/www/projects <Directory "/var/www/projects"> Options +FollowSymlinks +Indexes AllowOverride all </Directory> </VirtualHost> What am I missing here?

Read the article

Caching all files in varnish

- by csgwro

I want my varnish servers to cache all files. At backend there is lighttpd hosting only static files, and there is an md5 in the url in case of file change, ex. /gfx/Bird.b6e0bc2d6cbb7dfe1a52bc45dd2b05c4.swf). However my hit ratio is very poorly (about 0.18) My config: sub vcl_recv { set req.backend=default; ### passing health to backend if (req.url ~ "^/health.html$") { return (pass); } remove req.http.If-None-Match; remove req.http.cookie; remove req.http.authenticate; if (req.request == "GET") { return (lookup); } } sub vcl_fetch { ### do not cache wrong codes if (beresp.status == 404 || beresp.status >= 500) { set beresp.ttl = 0s; } remove beresp.http.Etag; remove beresp.http.Last-Modified; } sub vcl_deliver { set resp.http.expires = "Thu, 31 Dec 2037 23:55:55 GMT"; } I have made an performance tuning: DAEMON_OPTS="${DAEMON_OPTS} -p thread_pool_min=200 -p thread_pool_max=4000 -p thread_pool_add_delay=2 -p session_linger=100" The main url which is missed is... /health.html. Is that forward to backend correctly configured? Disabling health checking hit ratio increases to 0.45. Now mostly "/crossdomain.xml" is missed (from many domains, as it is wildcard). How can I avoid that? Should I carry on other headers like User-Agent or Accept-Encoding? I thing that default hashing mechanism is using url + host/IP. Compression is used at the backend. What else can improve performance?

Search Results

Search found 17054 results on 683 pages for 'jms request reply'.

Page 554/683 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561 | Next Page >

- by Bond

- by Daniel K

- by Guneet Sahai

- by Tatu Ulmanen

- by Ian

- by iamstupid

- by neekster

- by jeffora

- by Juw

- by Mohit Jain

- by Scott

- by user1160711

- by hub

- by harryg

- by MSI

- by MilindaD

- by joltmode

- by Scandalon

- by Sam Walton

- by John Smiith

- by pataroulis

- by Ton Hoekstra

- by Student

- by Brian Lacy

- by csgwro

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561 | Next Page >