http header - Page 557 - Developer IT

Creating static NAT blocks outbound traffic Cisco ASA

- by natediggs

Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

Read the article

At the Java DEMOgrounds - JavaFX

- by Janice J. Heiss

JavaFX has made rapid progress in the last year, as is evidenced by the wealth of demos on display. A few questions appear to be prominent in the minds of JavaFX enthusiasts. Here are some questions with answers provided by Oracle’s JavaFX team.When will the rest of the JavaFX code be available in open source?Oracle has started to open source JavaFX. The existing platform code will finish being committed to OpenJFX by the end of the year.Why should I use JavaFX instead of HTML5?We see JavaFX as complementary to HTML5, and most companies we talk to react positively once they understand how they can benefit from a hybrid solution. As most HTML5 developers will tell you, the biggest obstacle to deploying HTML5 applications is fragmentation. JavaFX offers a convenient way to render HTML and JavaScript within its WebView component, which provides the same level of quality and features across Windows, Mac, and Linux. Additionally, JavaScript in WebView can make calls into the Java code, and vice versa, allowing developers to tap into the best of both worlds.What is the market penetration of JavaFX? It is currently limited, as we've just made available JavaFX on Mac and Linux in August, but we expect JavaFX to be present on millions of desktop-type systems now that JavaFX is included as part of the JRE. We have also significantly lowered the level of effort required to deploy an application bundling the JRE and JavaFX runtime libraries. Finally, we are seeing a lot of interest by companies operating in the embedded market, who have found it hard to develop compelling UIs with existing technologies.Below are summaries of JavaFX Demos on display at JavaOne 2012:JavaFX EnsembleEnsemble is a collection of over 100 JavaFX samples packaged as a JavaFX application. This demo is especially useful to those new to JavaFX, or those not familiar with its latest features (e.g. canvas, color picker). Ensemble is the reference for getting familiar with JavaFX functionality. Each sample can be run from within Ensemble, and the API for each sample, as well as the source code are available alongside the sample.The samples source code can be saved as a NetBeans project for convenience purposes, or can be copied as is in any other Java IDE. The version of Ensemble shown is packaged as a native Windows application, including the JRE and JavaFX libraries. It was created with the JavaFX packager, which provides multiple packaging options, and frees developers from the cumbersome and error-prone process of packaging a Java application.FX Experience ToolsFX Experience Tools is a JavaFX application that provides different utilities to create new skins for your JavaFX applications. One of the most powerful features of JavaFX is the ability to skin applications via CSS. Since not all Java developers are familiar with CSS, these utilities are a great starting point to create custom skins. JavaFX allows developers to easily customize the look and feel of their applications through CSS. FX Experience Tools makes it easy to create new themes for JavaFX applications, even if you are not familiar with CSS. FX Experience Tools is a JavaFX application packaged as a native application including the JRE and JavaFX runtime libraries. FX Experience tools shows how this type of deployment simplifies the packaging of Java applications without requiring developers to master the intricacies of Java application packaging. The download site for FX Experience Tools is http://fxexperience.com/2012/03/announcing-fx-experience-tools/ JavaFX Scene BuilderJavaFX Scene Builder is a visual layout tool that lets users quickly design the UI of your JavaFX application, without coding. Users can drag and drop UI components, modify their properties, apply style sheets, and the FXML code they create for the layout is automatically generated in the background. The result is an FXML file that can then be combined with a Java project by binding the UI to the application’s logic. Developers can easily create user interfaces for their application, as well as separate the application’s UI from the application logic for easier maintenance. Attendees can get this app by going to javafx.com and checking the link at top of the “Overview” page.Scene Builder allows developers to easily layout JavaFX UI controls, charts, shapes, and containers, so that you can quickly prototype user interfaces. It generates FXML, an XML-based markup language that enables users to define an application’s user interface, separately from the application logic. Scene Builder can be used in combination with any Java IDE, but is more tightly integrated with NetBeans IDE. It is written as a JavaFX application, with native desktop integration on Windows and Mac OS X. It’s a perfect example of a JavaFX application packages as a native application.Scene Builder is available for your preferred development platform. Besides the GA release on Windows and Mac, a Developer Preview of Scene Builder for Linux has just been made available.Scenic ViewScenic View is a tool that can be used to understand the current state of your application UI, and to also easily manipulate properties of the scenegraph without having to keep editing your code. Creating UIs is a complex process, and it can be hard and tedious detecting these issues, editing the code, and then compiling it to test the app again. Scenic View is a great diagnostics tool that helps developers identify these issues and correct them at runtime.Attendees can get Scenic View by going to javafx.com, selecting the “Community” tab, and clicking the link under the “Third Party Tools and Utilities” section.Scenic View allows developers to easily examine the state of a JavaFX application scenegraph while the application is running. Some of the latest features added to Scenic View include event monitoring, javadoc browsing, and contextual menus. The download site for Scenic View is available here: http://fxexperience.com/scenic-view/ Conference TourConference Tour is an application that lets users discover some of the major Java conferences throughout the world. The Conference Tour application shows how simple it is to mix JavaFX and HTML5 into a single, interactive application. Attendees get Conference Tour here.JavaFX includes a Web engine based on Webkit that provides a consistent web interface to render HTML5 across operating systems, within a JavaFX application. JavaFX features a bi-directional bridge that allows Java APIs to call JavaScript within WebView, or allows JavaScript to make calls to Java APIs. This allows developers to leverage the best of both worlds.Java EE developers can take advantage of WebView and the JavaScript-Java bridge to allow their HTML clients to seamlessly bypass Web browser’s sandbox to access native system resources, providing a richer user experience.FXMediaPlayerFXMediaPlayer is an application that lets developers check different media functionality in JavaFX, such as synthesizer or support for HTTP Live Streaming (HLS). This demo shows how developers can embed video content in their Java applications. JavaFX leverages the underlying video (e.g., H.264) and audio (e.g., AAC) codecs on the user’s computer. JavaFX APIs allow developers to interact with the video content (e.g. play/pause, or programmable markers). Some of the latest media features introduced in JavaFX 2.2 include HTTP Live Streaming (HLS). Obviously there is a lot for JavaFX enthusiasts to chew on!

Read the article

Cisco 881 losing NAT NVI translation config after reload

- by MasterRoot24

This is a weird one, so I'll try to explain in as much detail as I can so I'm giving the whole picture. As I've mentioned in my other questions, I'm in the process of setting up a new Cisco 881 as my WAN router and NAT firewall. I'm facing an issue where NAT NVI rules that I have configured are not enabled after a reload of the router, regardless of the fact that they are present in the startup-config. In order to clarify this a little, here's the relevant section of my current running-config: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 ...and here's the mappings 'in action': Router1#show ip nat nvi translations | include --- tcp <WAN IP>:25 192.168.1.x:25 --- --- tcp <WAN IP>:80 192.168.1.x:80 --- --- tcp <WAN IP>:143 192.168.1.x:143 --- --- tcp <WAN IP>:443 192.168.1.x:443 --- --- tcp <WAN IP>:587 192.168.1.x:587 --- --- tcp <WAN IP>:993 192.168.1.x:993 --- --- tcp <WAN IP>:1723 192.168.1.x:1723 --- --- ...and here's proof that the mappings are saved to startup-config: Router1#show startup-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.x 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.x 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.x 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.x 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.x 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.x 993 interface FastEthernet4 993 However, look what happens after a reload of the router: Router1#reload Proceed with reload? [confirm]Connection to router closed by remote host. Connection to router closed. $ ssh joe@router Password: Authorized Access only Router1>en Password: Router1#show ip nat nvi translations | include --- Router1# Router1#show ip nat translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Here's proof that the running config should have the mappings setup as NVI: Router1#show running-config | include nat source ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 At this point, the mappings are not working (inbound connections from WAN on the HTTP/IMAP fail). I presume that this is because my interfaces are using ip nat enable for use with NVI mappings, instead of ip nat inside/outside. So, I re-apply the mappings: Router1#configure ter Router1#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router1(config)#ip nat source static tcp 192.168.1.2 1723 interface FastEthernet4 1723 Router1(config)#ip nat source static tcp 192.168.1.2 80 interface FastEthernet4 80 Router1(config)#ip nat source static tcp 192.168.1.2 443 interface FastEthernet4 443 Router1(config)#ip nat source static tcp 192.168.1.2 25 interface FastEthernet4 25 Router1(config)#ip nat source static tcp 192.168.1.2 587 interface FastEthernet4 587 Router1(config)#ip nat source static tcp 192.168.1.2 143 interface FastEthernet4 143 Router1(config)#ip nat source static tcp 192.168.1.2 993 interface FastEthernet4 993 Router1(config)#end ... then they show up correctly: Router1#show ip nat nvi translations | include --- tcp 188.222.181.173:25 192.168.1.2:25 --- --- tcp 188.222.181.173:80 192.168.1.2:80 --- --- tcp 188.222.181.173:143 192.168.1.2:143 --- --- tcp 188.222.181.173:443 192.168.1.2:443 --- --- tcp 188.222.181.173:587 192.168.1.2:587 --- --- tcp 188.222.181.173:993 192.168.1.2:993 --- --- tcp 188.222.181.173:1723 192.168.1.2:1723 --- --- Router1# Router1#show ip nat translations | include --- Router1# ... furthermore, now from both WAN and LAN, the services mapped above now work until the next reload. All of the above is required every time I have to reload the router (which is all too often at the moment :-( ). Here's my full current config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip access-group 101 in ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 access-list 101 permit udp 193.x.x.0 0.0.0.255 any eq 5060 access-list 101 deny udp any any eq 5060 access-list 101 permit ip any any ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end I'd appreciate it greatly if anyone can help me find out why these mappings are not setup correctly using the saved config after a reload.

Read the article

Faye private pub web sockets Errno::ECONNREFUSED: Connection refused - connect(2)

- by Rubytastic

Faye private pub has issues connecting. It works from rails console and from inside application. It fails when called from background process like delayed_job or sidekiq. I have been unable to resolve this issue for some time now, does anyone know why this happens? Errno::ECONNREFUSED: Connection refused - connect(2) /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/resolv-replace.rb:23:in initialize' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/resolv-replace.rb:23:in initialize' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/net/http.rb:878:in open' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/net/http.rb:878:in block in connect' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/timeout.rb:52:in timeout' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/net/http.rb:877:in connect' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/net/http.rb:862:in do_start' /Users/jordan/.rvm/rubies/ruby-2.0.0-p247/lib/ruby/2.0.0/net/http.rb:851:in start' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/private_pub-1.0.3/lib/private_pub.rb:42:in publish_message' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/private_pub-1.0.3/lib/private_pub.rb:29:in publish_to' /srv/books/app/workers/session_reload.rb:16:in perform' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/processor.rb:48:in block (3 levels) in process' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:119:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:119:inblock in invoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/newrelic_rpm-3.6.8.168/lib/new_relic/agent/instrumentation/sidekiq.rb:25:in block in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/newrelic_rpm-3.6.8.168/lib/new_relic/agent/instrumentation/controller_instrumentation.rb:324:in perform_action_with_newrelic_trace' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/newrelic_rpm-3.6.8.168/lib/new_relic/agent/instrumentation/sidekiq.rb:21:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:121:inblock in invoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-failures-0.2.2/lib/sidekiq/failures/middleware.rb:10:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:121:inblock in invoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/server/active_record.rb:6:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:121:inblock in invoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/server/retry_jobs.rb:62:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:121:inblock in invoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/server/logging.rb:11:in block in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/logging.rb:22:in with_context' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/server/logging.rb:7:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:121:inblock in invoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:124:in call' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/middleware/chain.rb:124:ininvoke' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/processor.rb:47:in block (2 levels) in process' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/processor.rb:102:in stats' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/processor.rb:46:in block in process' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/processor.rb:83:in do_defer' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/sidekiq-2.16.0/lib/sidekiq/processor.rb:37:in process' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/calls.rb:25:in public_send' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/calls.rb:25:in dispatch' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/calls.rb:122:in dispatch' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/actor.rb:322:in block in handle_message' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/actor.rb:416:in block in task' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/tasks.rb:55:in block in initialize' /Users/jordan/.rvm/gems/ruby-2.0.0-p247@books/gems/celluloid-0.15.2/lib/celluloid/tasks/task_fiber.rb:13:in block in create' Processor: dev-air.local:db67c04914cdef80c501043115298f6d-70211452597260

Read the article

Adding Volcanos and Options - Earthquake Locator, part 2

- by Bobby Diaz

Since volcanos are often associated with earthquakes, and vice versa, I decided to show recent volcanic activity on the Earthquake Locator map. I am pulling the data from a website created for a joint project between the Smithsonian's Global Volcanism Program and the US Geological Survey's Volcano Hazards Program, found here. They provide a Weekly Volcanic Activity Report as an RSS feed. I started implementing this new functionality by creating a new Volcano entity in the domain model and adding the following to the EarthquakeService class (I also factored out the common reading/parsing helper methods to a separate FeedReader class that can be used by multiple domain service classes): private static readonly string VolcanoFeedUrl = ConfigurationManager.AppSettings["VolcanoFeedUrl"]; /// <summary> /// Gets the volcano data for the previous week. /// </summary> /// <returns>A queryable collection of <see cref="Volcano"/> objects.</returns> public IQueryable<Volcano> GetVolcanos() { var feed = FeedReader.Load(VolcanoFeedUrl); var list = new List<Volcano>(); if ( feed != null ) { foreach ( var item in feed.Items ) { var quake = CreateVolcano(item); if ( quake != null ) { list.Add(quake); } } } return list.AsQueryable(); } /// <summary> /// Creates a <see cref="Volcano"/> object for each item in the RSS feed. /// </summary> /// <param name="item">The RSS item.</param> /// <returns></returns> private Volcano CreateVolcano(SyndicationItem item) { Volcano volcano = null; string title = item.Title.Text; string desc = item.Summary.Text; double? latitude = null; double? longitude = null; FeedReader.GetGeoRssPoint(item, out latitude, out longitude); if ( !String.IsNullOrEmpty(title) ) { title = title.Substring(0, title.IndexOf('-')); } if ( !String.IsNullOrEmpty(desc) ) { desc = String.Join("\n\n", desc .Replace("<p>", "") .Split( new string[] { "</p>" }, StringSplitOptions.RemoveEmptyEntries) .Select(s => s.Trim()) .ToArray()) .Trim(); } if ( latitude != null && longitude != null ) { volcano = new Volcano() { Id = item.Id, Title = title, Description = desc, Url = item.Links.Select(l => l.Uri.OriginalString).FirstOrDefault(), Latitude = latitude.GetValueOrDefault(), Longitude = longitude.GetValueOrDefault() }; } return volcano; } I then added the corresponding LoadVolcanos() method and Volcanos collection to the EarthquakeViewModel class in much the same way I did with the Earthquakes in my previous article in this series. Now that I am starting to add more information to the map, I wanted to give the user some options as to what is displayed and allowing them to choose what gets turned off. I have updated the MainPage.xaml to look like this: <UserControl x:Class="EarthquakeLocator.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:basic="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls" xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl" xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel" mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" > <UserControl.Resources> <DataTemplate x:Key="EarthquakeTemplate"> <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1" Width="{Binding Size}" Height="{Binding Size}" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="{Binding UtcTime}" /> <TextBlock Text="{Binding LocalTime}" /> <TextBlock Text="{Binding DepthDesc}" /> </StackPanel> </ToolTipService.ToolTip> </Ellipse> </DataTemplate> <DataTemplate x:Key="VolcanoTemplate"> <Polygon Fill="Gold" Stroke="Black" StrokeThickness="1" Points="0,10 5,0 10,10" bing:MapLayer.Position="{Binding Location}" bing:MapLayer.PositionOrigin="Center" MouseLeftButtonUp="Volcano_MouseLeftButtonUp"> <ToolTipService.ToolTip> <StackPanel> <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" /> <TextBlock Text="Click icon for more information..." /> </StackPanel> </ToolTipService.ToolTip> </Polygon> </DataTemplate> </UserControl.Resources> <UserControl.DataContext> <vm:EarthquakeViewModel AutoLoadData="True" /> </UserControl.DataContext> <Grid x:Name="LayoutRoot"> <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--" Center="{Binding MapCenter, Mode=TwoWay}" ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}"> <bing:MapItemsControl ItemsSource="{Binding Earthquakes}" ItemTemplate="{StaticResource EarthquakeTemplate}" /> <bing:MapItemsControl ItemsSource="{Binding Volcanos}" ItemTemplate="{StaticResource VolcanoTemplate}" /> </bing:Map> <basic:TabControl x:Name="tabs" VerticalAlignment="Bottom" MaxHeight="25" Opacity="0.7"> <basic:TabItem Margin="90,0,-90,0" MouseLeftButtonUp="TabItem_MouseLeftButtonUp"> <basic:TabItem.Header> <TextBlock x:Name="txtHeader" Text="Options" FontSize="13" FontWeight="Bold" /> </basic:TabItem.Header> <StackPanel Orientation="Horizontal"> <TextBlock Text="Earthquakes:" FontWeight="Bold" Margin="3" /> <StackPanel Margin="3"> <CheckBox Content=" < 4.0" IsChecked="{Binding ShowLt4, Mode=TwoWay}" /> <CheckBox Content="4.0 - 4.9" IsChecked="{Binding Show4s, Mode=TwoWay}" /> <CheckBox Content="5.0 - 5.9" IsChecked="{Binding Show5s, Mode=TwoWay}" /> </StackPanel> <StackPanel Margin="10,3,3,3"> <CheckBox Content="6.0 - 6.9" IsChecked="{Binding Show6s, Mode=TwoWay}" /> <CheckBox Content="7.0 - 7.9" IsChecked="{Binding Show7s, Mode=TwoWay}" /> <CheckBox Content="8.0 +" IsChecked="{Binding ShowGe8, Mode=TwoWay}" /> </StackPanel> <TextBlock Text="Other:" FontWeight="Bold" Margin="50,3,3,3" /> <StackPanel Margin="3"> <CheckBox Content="Volcanos" IsChecked="{Binding ShowVolcanos, Mode=TwoWay}" /> </StackPanel> </StackPanel> </basic:TabItem> </basic:TabControl> </Grid> </UserControl> Notice that I added a VolcanoTemplate that uses a triangle-shaped Polygon to represent the Volcano locations, and I also added a second <bing:MapItemsControl /> tag to the map to bind to the Volcanos collection. The TabControl found below the map houses the options panel that will present the user with several checkboxes so they can filter the different points based on type and other properties (i.e. Magnitude). Initially, the TabItem is collapsed to reduce it's footprint, but the screen shot below shows the options panel expanded to reveal the available settings: I have updated the Source Code and Live Demo to include these new features. Happy Mapping!

Read the article

Norton Ghost EBAB03F1: The specified network name is no longer available.

- by Breck Carter

After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

Read the article

Regression testing with Selenium GRID

- by Ben Adderson

A lot of software teams out there are tasked with supporting and maintaining systems that have grown organically over time, and the web team here at Red Gate is no exception. We're about to embark on our first significant refactoring endeavour for some time, and as such its clearly paramount that the code be tested thoroughly for regressions. Unfortunately we currently find ourselves with a codebase that isn't very testable - the three layers (database, business logic and UI) are currently tightly coupled. This leaves us with the unfortunate problem that, in order to confidently refactor the code, we need unit tests. But in order to write unit tests, we need to refactor the code :S To try and ease the initial pain of decoupling these layers, I've been looking into the idea of using UI automation to provide a sort of system-level regression test suite. The idea being that these tests can help us identify regressions whilst we work towards a more testable codebase, at which point the more traditional combination of unit and integration tests can take over. Ending up with a strong battery of UI tests is also a nice bonus :) Following on from my previous posts (here, here and here) I knew I wanted to use Selenium. I also figured that this would be a good excuse to put my xUnit [Browser] attribute to good use. Pretty quickly, I had a raft of tests that looked like the following (this particular example uses Reflector Pro). In a nut shell the test traverses our shopping cart and, for a particular combination of number of users and months of support, checks that the price calculations all come up with the correct values. [BrowserTheory] [Browser(Browsers.Firefox3_6, "http://www.red-gate.com")] public void Purchase1UserLicenceNoSupport(SeleniumProvider seleniumProvider) { //Arrange _browser = seleniumProvider.GetBrowser(); _browser.Open("http://www.red-gate.com/dynamic/shoppingCart/ProductOption.aspx?Product=ReflectorPro"); //Act _browser = ShoppingCartHelpers.TraverseShoppingCart(_browser, 1, 0, ".NET Reflector Pro"); //Assert var priceResult = PriceHelpers.GetNewPurchasePrice(db, "ReflectorPro", 1, 0, Currencies.Euros); Assert.Equal(priceResult.Price, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl01_Price")); Assert.Equal(priceResult.Tax, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Tax")); Assert.Equal(priceResult.Total, _browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Total")); } These tests are pretty concise, with much of the common code in the TraverseShoppingCart() and GetNewPurchasePrice() methods. The (inevitable) problem arose when it came to execute these tests en masse. Selenium is a very slick tool, but it can't mask the fact that UI automation is very slow. To give you an idea, the set of cases that covers all of our products, for all combinations of users and support, came to 372 tests (for now only considering purchases in dollars). In the world of automated integration tests, that's a very manageable number. For unit tests, it's a trifle. However for UI automation, those 372 tests were taking just over two hours to run. Two hours may not sound like a lot, but those cases only cover one of the three currencies we deal with, and only one of the many different ways our systems can be asked to calculate a price. It was already pretty clear at this point that in order for this approach to be viable, I was going to have to find a way to speed things up. Up to this point I had been using Selenium Remote Control to automate Firefox, as this was the approach I had used previously and it had worked well. Fortunately, the guys at SeleniumHQ also maintain a tool for executing multiple Selenium RC tests in parallel: Selenium Grid. Selenium Grid uses a central 'hub' to handle allocation of Selenium tests to individual RCs. The Remote Controls simply register themselves with the hub when they start, and then wait to be assigned work. The (for me) really clever part is that, as far as the client driver library is concerned, the grid hub looks exactly the same as a vanilla remote control. To create a new browser session against Selenium RC, the following C# code suffices: new DefaultSelenium("localhost", 4444, "*firefox", "http://www.red-gate.com"); This assumes that the RC is running on the local machine, and is listening on port 4444 (the default). Assuming the hub is running on your local machine, then to create a browser session in Selenium Grid, via the hub rather than directly against the control, the code is exactly the same! Behind the scenes, the hub will take this request and hand it off to one of the registered RCs that provides the "*firefox" execution environment. It will then pass all communications back and forth between the test runner and the remote control transparently. This makes running existing RC tests on a Selenium Grid a piece of cake, as the developers intended. For a more detailed description of exactly how Selenium Grid works, see this page. Once I had a test environment capable of running multiple tests in parallel, I needed a test runner capable of doing the same. Unfortunately, this does not currently exist for xUnit (boo!). MbUnit on the other hand, has the concept of concurrent execution baked right into the framework. So after swapping out my assembly references, and fixing up the resulting mismatches in assertions, my example test now looks like this: [Test] public void Purchase1UserLicenceNoSupport() { //Arrange ISelenium browser = BrowserHelpers.GetBrowser(); var db = DbHelpers.GetWebsiteDBDataContext(); browser.Start(); browser.Open("http://www.red-gate.com/dynamic/shoppingCart/ProductOption.aspx?Product=ReflectorPro"); //Act browser = ShoppingCartHelpers.TraverseShoppingCart(browser, 1, 0, ".NET Reflector Pro"); var priceResult = PriceHelpers.GetNewPurchasePrice(db, "ReflectorPro", 1, 0, Currencies.Euros); //Assert Assert.AreEqual(priceResult.Price, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl01_Price")); Assert.AreEqual(priceResult.Tax, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Tax")); Assert.AreEqual(priceResult.Total, browser.GetText("ctl00_content_InvoiceShoppingItemRepeater_ctl02_Total")); } This is pretty much the same as the xUnit version. The exceptions are that the attributes have changed, the //Arrange phase now has to handle setting up the ISelenium object, as the attribute that previously did this has gone away, and the test now sets up its own database connection. Previously I was using a shared database connection, but this approach becomes more complicated when tests are being executed concurrently. To avoid complexity each test has its own connection, which it is responsible for closing. For the sake of readability, I snipped out the code that closes the browser session and the db connection at the end of the test. With all that done, there was only one more step required before the tests would execute concurrently. It is necessary to tell the test runner which tests are eligible to run in parallel, via the [Parallelizable] attribute. This can be done at the test, fixture or assembly level. Since I wanted to run all tests concurrently, I marked mine at the assembly level in the AssemblyInfo.cs using the following: [assembly: DegreeOfParallelism(3)] [assembly: Parallelizable(TestScope.All)] The second attribute marks all tests in the assembly as [Parallelizable], whilst the first tells the test runner how many concurrent threads to use when executing the tests. I set mine to three since I was using 3 RCs in separate VMs. With everything now in place, I fired up the Icarus* test runner that comes with MbUnit. Executing my 372 tests three at a time instead of one at a time reduced the running time from 2 hours 10 minutes, to 55 minutes, that's an improvement of about 58%! I'd like to have seen an improvement of 66%, but I can understand that either inefficiencies in the hub code, my test environment or the test runner code (or some combination of all three most likely) contributes to a slightly diminished improvement. That said, I'd love to hear about any experience you have in upping this efficiency. Ultimately though, it was a saving that was most definitely worth having. It makes regression testing via UI automation a far more plausible prospect. The other obvious point to make is that this approach scales far better than executing tests serially. So if ever we need to improve performance, we just register additional RC's with the hub, and up the DegreeOfParallelism. *This was just my personal preference for a GUI runner. The MbUnit/Gallio installer also provides a command line runner, a TestDriven.net runner, and a Resharper 4.5 runner. For now at least, Resharper 5 isn't supported.

Read the article

Remote EJB lookup issue with WebSphere 6.1

- by marc dauncey

I've seen this question asked before, but I've tried various solutions proposed, to no avail. Essentially, I have two EJB enterprise applications, that need to communicate with one another. The first is a web application, the second is a search server - they are located on different development servers, not in the same node, cell, or JVM, although they are on the same physical box. I'm doing the JNDI lookup via IIOP, and the URL I am using is as follows: iiop://searchserver:2819 In my hosts file, I've set searchserver to 127.0.0.1. The ports for my search server are bound to this hostname too. However, when the web app (that uses Spring btw) attempts to lookup the search EJB, it fails with the following error. This is driving me nuts, surely this kind of comms between the servers should be fairly simple to get working. I've checked the ports and they are correct. I note that the exception says the initial context is H00723Node03Cell/nodes/H00723Node03/servers/server1, name: ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome. This is the web apps server NOT the search server. Is this correct? How can I get Spring to use the right context? [08/06/10 17:14:28:655 BST] 00000028 SystemErr R org.springframework.remoting.RemoteLookupFailureException: Failed to locate remote EJB [ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome]; nested exception is javax.naming.NameNotFoundException: Context: H00723Node03Cell/nodes/H00723Node03/servers/server1, name: ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome: First component in name hmvsearch/HMVSearchHome not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0] at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.doInvoke(SimpleRemoteSlsbInvokerInterceptor.java:101) at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.invoke(AbstractRemoteSlsbInvokerInterceptor.java:140) at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy7.doSearchByProductKeywordsForKiosk(Unknown Source) at com.hmv.web.usecases.search.SearchUC.execute(SearchUC.java:128) at com.hmv.web.actions.search.SearchAction.executeAction(SearchAction.java:129) at com.hmv.web.actions.search.KioskSearchAction.executeAction(KioskSearchAction.java:37) at com.hmv.web.actions.HMVAbstractAction.execute(HMVAbstractAction.java:123) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482) at com.hmv.web.controller.HMVActionServlet.process(HMVActionServlet.java:149) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507) at javax.servlet.http.HttpServlet.service(HttpServlet.java:743) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1282) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1239) at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:136) at com.hmv.web.support.SessionFilter.doFilter(SessionFilter.java:137) at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:142) at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:121) at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:82) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:670) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2933) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:221) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:210) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1912) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:84) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:472) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:411) at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:101) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:566) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:619) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:952) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1039) at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1462) Caused by: javax.naming.NameNotFoundException: Context: H00723Node03Cell/nodes/H00723Node03/servers/server1, name: ejb/com/hmv/dataaccess/ejb/hmvsearch/HMVSearchHome: First component in name hmvsearch/HMVSearchHome not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0] at com.ibm.ws.naming.jndicos.CNContextImpl.processNotFoundException(CNContextImpl.java:4392) at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup(CNContextImpl.java:1752) at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup(CNContextImpl.java:1707) at com.ibm.ws.naming.jndicos.CNContextImpl.lookupExt(CNContextImpl.java:1412) at com.ibm.ws.naming.jndicos.CNContextImpl.lookup(CNContextImpl.java:1290) at com.ibm.ws.naming.util.WsnInitCtx.lookup(WsnInitCtx.java:145) at javax.naming.InitialContext.lookup(InitialContext.java:361) at org.springframework.jndi.JndiTemplate$1.doInContext(JndiTemplate.java:132) at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88) at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:130) at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:155) at org.springframework.jndi.JndiLocatorSupport.lookup(JndiLocatorSupport.java:95) at org.springframework.jndi.JndiObjectLocator.lookup(JndiObjectLocator.java:105) at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.lookup(AbstractRemoteSlsbInvokerInterceptor.java:98) at org.springframework.ejb.access.AbstractSlsbInvokerInterceptor.getHome(AbstractSlsbInvokerInterceptor.java:143) at org.springframework.ejb.access.AbstractSlsbInvokerInterceptor.create(AbstractSlsbInvokerInterceptor.java:172) at org.springframework.ejb.access.AbstractRemoteSlsbInvokerInterceptor.newSessionBeanInstance(AbstractRemoteSlsbInvokerInterceptor.java:226) at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.getSessionBeanInstance(SimpleRemoteSlsbInvokerInterceptor.java:141) at org.springframework.ejb.access.SimpleRemoteSlsbInvokerInterceptor.doInvoke(SimpleRemoteSlsbInvokerInterceptor.java:97) ... 36 more Many thanks for any assistance! Marc

Read the article

CodePlex Daily Summary for Friday, July 19, 2013

CodePlex Daily Summary for Friday, July 19, 2013Popular ReleasesuComponents: uComponents v5.5.0: Following on from our 101355 release, we bring you... v5.5.0! Resolved issues The following issues have been resolved in 5.5.0: 14634 14848 DataType Grid 14840 14842 14845 UpgradingThe best way to upgrade uComponents is to re-install via Umbraco's back-office package installer, (either from the package repository or a local package upload). Do not uninstall an existing uComponents package, as this may lead to data loss! Umbraco compatibilityThis release is compatible with Umbraco 4...51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.Scryber PDF Generation: Scryber.Installer.v0.8.3: This one has tables! A significant update to the scryber library, with the inclusion of tables. There is no column span, or row span, and nested tables are not fully supported. But - they overflow nicely and are well styled. And they can be data bound. Other updates The Link element has inner components directly as a child, rather than in a Content element. The existing files will still continue to work, but are invalid wrt the schema. Databinding is now supported at the document level, r...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...GoAgent GUI: GoAgent GUI 1.2.0 ???: *???????，??????????????，?????????????? ????????* ????????(Beta) Beta????：https://goagent.codeplex.com/workitem/list/basic ??????：uygw@outlook.com ????：https://goagent.codeplex.com/documentation ?????????????????。Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesAscend 3D: Ascend (2013-07-17): Ascend 2.1 Animation bugfixes and speed/robustness improvements Added compatibility for multiple top-level bones on armatures Ascend Blender Exporter 2.1 Removed need to create parent-child relationship between armature and skinning mesh Added support for exporting multiple top-level bones on armatures AscendViewer 1.0.4 Updated to use latest version of Ascend libraryCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.smoketestgit1: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesthg: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingsmoketesttfs: new release: Wiki Markup Guide bold italics underline Heading 1 Heading 2 Bullet List Bullet List 2 Number List Number List 2 http://www.example.com Do not apply formattingdatajs - JavaScript Library for data-centric web applications: datajs version 1.1.1: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes ...Orchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...New Projects[C#]A Complete MySQL Manager Project: An open-source MySQL database manager oriented to multi-threading environments, supporting to create an entire database from scratch and edit it.bCal Javascript Calendar Generator: Using this simple javascript library, you can create simple navigable calendars in your website with just one line of user code.Better Network: Tools to delete network profile and network lists in Windows 8.C# Intellisense for Notepad++: 'CS-Script Intellisense' is a real C# intellisense solution based on CS-Script and ICSharpCode.NRefactory/Mono.Cecil.DARF: Dynamic Application Runtime Framework: A set of tools and libraries which help software developers create fully distributed and component-based applications. FeiXinV5: Just TestFollower Catcher: Game made for the 2012 Windows 8 Megathon. Second place in Madrid's local competition.MeeOS .NET: El primer sistema operativo GNU GPL en español.Music Vault: Music Vault is program to store your favorite music in one place, you can in any time move all your music library by moving only one file.MVC uTorrent: This is an ASP.NET MVC uTorrent front end, that utilises the uTorrent API. The main features: - Single page application - Can be hosted in IISMyTaskManager: This project Related to distribute the task to log in users OO2RDF: OO2RDF is a framework for data triplification. P(y)rotein Subcellular Location Image Database: A library that allows communication with an OMERO database, an open-source software for storage and manipulation of biological images.PE Toolbox: PE Toolbox ? ????? ?? ???????????, ????? ??????? ??? ??????????? ?? ?????. ???? ????? ??????????? ???????: - PE IFE (Importing from Excel) PeGscan: *PeGscan*ScriptZilla: ScriptZilla is an Free Editor for Windows with more Than 23 Languages.Sharepoint : Reconciliate SSRS Reports and Datasets with datasources Powershell: Powershell to link datasources to SSRS reports and datasetsSync-Moped: The idea behind the "Sync-Moped" is to synchronize two directories with backup functionality.System.Time: System.Time provides a type for .NET that allows the managing of a time in System.String, System.DateTime and System.TimeSpan form at the same time.Text Analytics: Project summary will be added later.Tibia Universal MC .NET: This tool was written as an attempt to port the [url:http://code.google.com/p/xenomc/] to the .NET Framework.VRFramework: VR Framework is a system for creating a virtual reality games using your PC, and Android smart phone, and Unity 3D.

Read the article

JAX-WS MarshalException with custom JAX-B bindings: Unable to marshal type "java.lang.String" as an

- by MoneyMark

I seem to be having an issue with Jax-WS and Jax-b playing nicely together. I need to consume a web-service, which has a predefined WSDL. When executing the generated client I am receiving the following error: javax.xml.ws.WebServiceException: javax.xml.bind.MarshalException - with linked exception: [com.sun.istack.SAXException2: unable to marshal type "java.lang.String" as an element because it is missing an @XmlRootElement annotation] This started occurring when I used an external custom binding file to map needlessly complex types to java.lang.string. Here is an excerpt from my binding file: <?xml version="1.0" encoding="UTF-8"?> <bindings xmlns="http://java.sun.com/xml/ns/jaxb" version="2.0" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xjc="http://java.sun.com/xml/ns/jaxb/xjc"> <bindings schemaLocation="http://localhost:7777/GESOR/services/RegistryUpdatePort?wsdl#types?schema1" node="/xs:schema"> <bindings node="//xs:element[@name='StwrdCompany']//xs:complexType//xs:sequence//xs:element[@name='company_name']"> <property> <baseType name="java.lang.String" /> </property> </bindings> <bindings node="//xs:element[@name='StwrdCompany']//xs:complexType//xs:sequence//xs:element[@name='address1']"> <property> <baseType name="java.lang.String" /> </property> </bindings> <bindings node="//xs:element[@name='StwrdCompany']//xs:complexType//xs:sequence//xs:element[@name='address2']"> <property> <baseType name="java.lang.String" /> </property> </bindings> ...more fields </bindings> </bindings> When executing wsimport against the provided WSDL, StwrdCompany is generated with the following variables declared: @XmlRootElement(name = "StwrdCompany") public class StwrdCompany { @XmlElementRef(name = "company_name", type = JAXBElement.class) protected String companyName; @XmlElementRef(name = "address1", type = JAXBElement.class) protected String address1; @XmlElementRef(name = "address2", type = JAXBElement.class) ... more fields ... getters/setters @XmlAccessorType(XmlAccessType.FIELD) @XmlType(name = "", propOrder = { "value" }) public static class CompanyName { @XmlValue protected String value; @XmlAttribute protected Boolean updateToNULL; /** * Gets the value of the value property. * * @return * possible object is * {@link String } * */ public String getValue() { return value; } /** * Sets the value of the value property. * * @param value * allowed object is * {@link String } * */ public void setValue(String value) { this.value = value; } /** * Gets the value of the updateToNULL property. * * @return * possible object is * {@link Boolean } * */ public boolean isUpdateToNULL() { if (updateToNULL == null) { return false; } else { return updateToNULL; } } /** * Sets the value of the updateToNULL property. * * @param value * allowed object is * {@link Boolean } * */ public void setUpdateToNULL(Boolean value) { this.updateToNULL = value; } ... more inner classes } } Finally, here is the associated snippet from the WSDL that seems to be causing such grief. <xs:element name="StwrdCompany"> <xs:complexType> <xs:sequence> <xs:element maxOccurs="1" minOccurs="0" name="company_name" nillable="true"> <xs:complexType> <xs:simpleContent> <xs:extension base="xs:string"> <xs:attribute default="false" name="updateToNULL" type="xs:boolean"/> </xs:extension> </xs:simpleContent> </xs:complexType> </xs:element> <xs:element maxOccurs="1" minOccurs="0" name="address1" nillable="true"> <xs:complexType> <xs:simpleContent> <xs:extension base="xs:string"> <xs:attribute default="false" name="updateToNULL" type="xs:boolean"/> </xs:extension> </xs:simpleContent> </xs:complexType> </xs:element> ... more fields in the same format <xs:element maxOccurs="1" minOccurs="0" name="p_source_timestamp" nillable="false" type="xs:string"/> </xs:sequence> <xs:attribute name="company_xid" type="xs:string"/> </xs:complexType> </xs:element> The reason for the custom binding is so I can map user input from a pojo into the StwrdCompany object more easily, whether it be direct instantiation or through the use of Dozer for bean mapping. I was unable to successfully map between the objects without the custom binding. Finally, one other thing I tried was setting a globalBinding definition: <globalBindings generateValueClass="false"></globalBindings> This caused the server to through an argument mismatch exception since the Soap Message was using xs:string xml types instead of passing the defined complex types, so I abandoned that idea. Any insight into what is causing the MarshalException or how to go about solving the issue of calling the webservice and mapping these objects more easily, is greatly appreciated. I've been searching for days and I sadly think I am stumped.

Read the article

IE6 + IE7 CSS problem with overflow hidden

- by googletorp

So I have created a slider for a homepage, that slides some images with a title and teaser text using jQuery. Everything works fine, and I went to check IE and found that IE 6 and 7 kills my slider css completely. I can't figure out why, but for some reason I can't hide the non active slides with overflow: hidden; I've tried tweaking the css back and forth, but haven't been able to figure out what's causing the problem. I've recreated the problem in a more isolated html page. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="da" lang="da" dir="ltr"> <head> <style> body { width: 900px; } .column-1 { width: 500px; float: left; } .column-2 { width: 200px; float: left; } .column-3 { width: 200px; float: left; } h4 { font-size: 16px; margin: 0 0 5px; } p { margin: 5px 0; } ul { margin: 0; padding: 0; width: 2000px; left: -499px; overflow: hidden; position: relative; } li { list-style: none; display: block; float: left; } .item-list { overflow: hidden; width: 499px; } img { display: block; } .infobox { background: black; padding: 10px 13px; margin-top: -74px; height: 54px; width: 473px; color: white; position: absolute; } .first { display: block; } </style> </head> <body> <div class="column-1"> <div class="item-list clearfix"> <ul> <li class="first"> <div class="node-slide"> <img src="http://www.hanselman.com/blog/content/binary/lolcats-funny-pictures-leroy-jenkins.jpg" /> <div class="infobox"> <h4>Title 1</h4> <p>Teaser 1</p> </div> </div> </li> <li> <div class="slide"> <img src="http://www.hanselman.com/blog/content/binary/lolcats-funny-pictures-leroy-jenkins.jpg" /> <div class="infobox"> <h4>Title 2</h4> <p>Teaser 2</p> </div> </div> </li> <li class="last"> <div class="slide"> <img src="http://www.hanselman.com/blog/content/binary/lolcats-funny-pictures-leroy-jenkins.jpg" /> <div class="infobox"> <h4>Title 3</h4> <p>Teaser 3</p> </div> </div> </li> </ul> </div> </div> <div class="column-2"> ... </div> <div class="column-3"> ... </div> </body> </html> Any ideas as to why IE wont hide images outside div with class item-list?

Read the article

SQL – Migrate Database from SQL Server to NuoDB – A Quick Tutorial

- by Pinal Dave

Data is growing exponentially and every organization with growing data is thinking of next big innovation in the world of Big Data. Big data is a indeed a future for every organization at one point of the time. Just like every other next big thing, big data has its own challenges and issues. The biggest challenge associated with the big data is to find the ideal platform which supports the scalability and growth of the data. If you are a regular reader of this blog, you must be familiar with NuoDB. I have been working with NuoDB for a while and their recent release is the best thus far. NuoDB is an elastically scalable SQL database that can run on local host, datacenter and cloud-based resources. A key feature of the product is that it does not require sharding (read more here). Last week, I was able to install NuoDB in less than 90 seconds and have explored their Explorer and Admin sections. You can read about my experiences in these posts: SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB SQL – Quick Start with Admin Sections of NuoDB – Manage NuoDB Database SQL – Quick Start with Explorer Sections of NuoDB – Query NuoDB Database Many SQL Authority readers have been following me in my journey to evaluate NuoDB. One of the frequently asked questions I’ve received from you is if there is any way to migrate data from SQL Server to NuoDB. The fact is that there is indeed a way to do so and NuoDB provides a fantastic tool which can help users to do it. NuoDB Migrator is a command line utility that supports the migration of Microsoft SQL Server, MySQL, Oracle, and PostgreSQL schemas and data to NuoDB. The migration to NuoDB is a three-step process: NuoDB Migrator generates a schema for a target NuoDB database It loads data into the target NuoDB database It dumps data from the source database Let’s see how we can migrate our data from SQL Server to NuoDB using a simple three-step approach. But before we do that we will create a sample database in MSSQL and later we will migrate the same database to NuoDB: Setup Step 1: Build a sample data CREATE DATABASE [Test]; CREATE TABLE [Department]( [DepartmentID] [smallint] NOT NULL, [Name] VARCHAR(100) NOT NULL, [GroupName] VARCHAR(100) NOT NULL, [ModifiedDate] [datetime] NOT NULL, CONSTRAINT [PK_Department_DepartmentID] PRIMARY KEY CLUSTERED ( [DepartmentID] ASC ) ) ON [PRIMARY]; INSERT INTO Department SELECT * FROM AdventureWorks2012.HumanResources.Department; Note that I am using the SQL Server AdventureWorks database to build this sample table but you can build this sample table any way you prefer. Setup Step 2: Install Java 64 bit Before you can begin the migration process to NuoDB, make sure you have 64-bit Java installed on your computer. This is due to the fact that the NuoDB Migrator tool is built in Java. You can download 64-bit Java for Windows, Mac OSX, or Linux from the following link: http://java.com/en/download/manual.jsp. One more thing to remember is that you make sure that the path in your environment settings is set to your JAVA_HOME directory or else the tool will not work. Here is how you can do it: Go to My Computer >> Right Click >> Select Properties >> Click on Advanced System Settings >> Click on Environment Variables >> Click on New and enter the following values. Variable Name: JAVA_HOME Variable Value: C:\Program Files\Java\jre7 Make sure you enter your Java installation directory in the Variable Value field. Setup Step 3: Install JDBC driver for SQL Server. There are two JDBC drivers available for SQL Server. Select the one you prefer to use by following one of the two links below: Microsoft JDBC Driver jTDS JDBC Driver In this example we will be using jTDS JDBC driver. Once you download the driver, move the driver to your NuoDB installation folder. In my case, I have moved the JAR file of the driver into the C:\Program Files\NuoDB\tools\migrator\jar folder as this is my NuoDB installation directory. Now we are all set to start the three-step migration process from SQL Server to NuoDB: Migration Step 1: NuoDB Schema Generation Here is the command I use to generate a schema of my SQL Server Database in NuoDB. First I go to the folder C:\Program Files\NuoDB\tools\migrator\bin and execute the nuodb-migrator.bat file. Note that my database name is ‘test’. Additionally my username and password is also ‘test’. You can see that my SQL Server database is running on my localhost on port 1433. Additionally, the schema of the table is ‘dbo’. nuodb-migrator schema –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.path=/tmp/schema.sql The above script will generate a schema of all my SQL Server tables and will put it in the folder C:\tmp\schema.sql . You can open the schema.sql file and execute this file directly in your NuoDB instance. You can follow the link here to see how you can execute the SQL script in NuoDB. Please note that if you have not yet created the schema in the NuoDB database, you should create it before executing this step. Step 2: Generate the Dump File of the Data Once you have recreated your schema in NuoDB from SQL Server, the next step is very easy. Here we create a CSV format dump file, which will contain all the data from all the tables from the SQL Server database. The command to do so is very similar to the above command. Be aware that this step may take a bit of time based on your database size. nuodb-migrator dump –source.driver=net.sourceforge.jtds.jdbc.Driver –source.url=jdbc:jtds:sqlserver://localhost:1433/ –source.username=test –source.password=test –source.catalog=test –source.schema=dbo –output.type=csv –output.path=/tmp/dump.cat Once the above command is successfully executed you can find your CSV file in the C:\tmp\ folder. However, you do not have to do anything manually. The third and final step will take care of completing the migration process. Migration Step 3: Load the Data into NuoDB After building schema and taking a dump of the data, the very next step is essential and crucial. It will take the CSV file and load it into the NuoDB database. nuodb-migrator load –target.url=jdbc:com.nuodb://localhost:48004/mytest –target.schema=dbo –target.username=test –target.password=test –input.path=/tmp/dump.cat Please note that in the above script we are now targeting the NuoDB database, which we have already created with the name of “MyTest”. If the database does not exist, create it manually before executing the above script. I have kept the username and password as “test”, but please make sure that you create a more secure password for your database for security reasons. Voila! You’re Done That’s it. You are done. It took 3 setup and 3 migration steps to migrate your SQL Server database to NuoDB. You can now start exploring the database and build excellent, scale-out applications. In this blog post, I have done my best to come up with simple and easy process, which you can follow to migrate your app from SQL Server to NuoDB. Download NuoDB I strongly encourage you to download NuoDB and go through my 3-step migration tutorial from SQL Server to NuoDB. Additionally here are two very important blog post from NuoDB CTO Seth Proctor. He has written excellent blog posts on the concept of the Administrative Domains. NuoDB has this concept of an Administrative Domain, which is a collection of hosts that can run one or multiple databases. Each database has its own TEs and SMs, but all are managed within the Admin Console for that particular domain. http://www.nuodb.com/techblog/2013/03/11/getting-started-provisioning-a-domain/ http://www.nuodb.com/techblog/2013/03/14/getting-started-running-a-database/ Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

Read the article

Java FAQ: Tudo o que você precisa saber

- by Bruno.Borges

Com frequência recebo e-mails de clientes com dúvidas sobre "quando sairá a próxima versão do Java?", ou então "quando vai expirar o Java?" ou ainda "quais as mudanças da próxima versão?". Por isso resolvi escrever aqui um FAQ, respondendo estas dúvidas e muitas outras. Este post estará sempre atualizado, então se você possui alguma dúvida, envie para mim no Twitter @brunoborges. Qual a diferença entre o Oracle JDK e o OpenJDK?O projeto OpenJDK funciona como a implementação de referência Open Source do Java Standard Edition. Empresas como a Oracle, IBM, e Azul Systems suportam e investem no projeto OpenJDK para continuar evoluindo a plataforma Java. O Oracle JDK é baseado no OpenJDK, mas traz outras ferramentas como o Mission Control, e a máquina virtual traz algumas features avançadas como por exemplo o Flight Recorder. Até a versão 6, a Oracle oferecia duas máquinas virtuais: JRockit (BEA) e HotSpot (Sun). A partir da versão 7 a Oracle unificou as máquinas virtuais, e levou as features avançadas do JRockit para dentro da VM HotSpot. Leia também o OpenJDK FAQ. Onde posso obter binários beta Early Access do JDK 7, JDK 8, JDK 9 para testar?A partir do projeto OpenJDK, existe um projeto específico para cada versão do Java. Nestes projetos você pode encontrar binários beta Early Access, além do código-fonte. JDK 6 - http://jdk6.java.net/ JDK 7 - http://jdk7.java.net/ JDK 8 - http://jdk8.java.net/ JDK 9 - http://jdk9.java.net/ Quando acaba o suporte do Oracle Java SE 6, 7, 8? Somente produtos e versões com release oficial são suportados pela Oracle (exemplo: não há suporte para binários beta do JDK 7, JDK 8, ou JDK 9). Existem duas categorias de datas que o usuriário do Java deve estar ciente: EOPU - End of Public UpdatesMomento em que a Oracle não mais disponibiliza publicamente atualizações Oracle SupportPolítica de suporte da Oracle para produtos, incluindo o Oracle Java SE O Oracle Java SE é um produto e portando os períodos de suporte são regidos pelo Oracle Lifetime Support Policy. Consulte este documento para datas atualizadas e específicas para cada versão do Java. O Oracle Java SE 6 já atingiu EOPU (End of Public Updates) e agora é mantido e atualizado somente para clientes através de contrato comercial de suporte. Para maiores informações, consulte a página sobre Oracle Java SE Support. O mais importante aqui é você estar ciente sobre as datas de EOPU para as versões do Java SE da Oracle.Consulte a página do Oracle Java SE Support Roadmap e busque nesta página pela tabela com nome Java SE Public Updates. Nela você encontrará a data em que determinada versão do Java irá atingir EOPU. Como funciona o versionamento do Java?Em 2013, a Oracle divulgou um novo esquema de versionamento do Java para facilmente identificar quando é um release CPU e quando é um release LFR, e também para facilitar o planejamento e desenvolvimento de correções e features para futuras versões. CPU - Critical Patch UpdateAtualizações com correções de segurança. Versão será múltipla de 5, ou com soma de 1 para manter o número ímpar. Exemplos: 7u45, 7u51, 7u55. LFR - Limited Feature ReleaseAtualizações com correções de funcionalidade, melhorias de performance, e novos recursos. Versões de números pares múltiplos de 20, com final 0. Exemplos: 7u40, 7u60, 8u20. Qual a data da próxima atualização de segurança (CPU) do Java SE?Lançamentos do tipo CPU são controlados e pré-agendados pela Oracle e se aplicam a todos os produtos, inclusive o Oracle Java SE. Estes releases acontecem a cada 3 meses, sempre na Terça-feira mais próxima do dia 17 dos meses de Janeiro, Abril, Julho, e Outubro. Consulte a página Critical Patch Updates, Security Alerts and Third Party Bulleting para saber das próximas datas. Caso tenha interesse, você pode acompanhar através de recebimentos destes boletins diretamente no seu email. Veja como assinar o Boletim de Segurança da Oracle. Qual a data da próxima atualização de features (LFR) do Java SE?A Oracle reserva o direito de não divulgar estas datas, assim como o faz para todos os seus produtos. Entretanto é possível acompanhar o desenvolvimento da próxima versão pelos sites do projeto OpenJDK. A próxima versão do JDK 7 será o update 60 e binários beta Early Access já estão disponíveis para testes. A próxima versão doJDK 8 será o update 20 e binários beta Early Access já estão disponíveis para testes. Onde posso ver as mudanças e o que foi corrigido para a próxima versão do Java?A Oracle disponibiliza um changelog para cada binário beta Early Access divulgado no portal Java.net. JDK 7 update 60 changelogs JDK 8 update 20 changelogs Quando o Java da minha máquina (ou do meu usuário) vai expirar?Conheçendo o sistema de versionamento do Java e a periodicidade dos releases de CPU, o usuário pode determinar quando que um update do Java irá expirar. De todo modo, a cada novo update, a Oracle já informa quando que este update deverá expirar diretamente no release notes da versão. Por exemplo, no release notes da versão Oracle Java SE 7 update 55, está escrito na seção JRE Expiration Date o seguinte: The JRE expires whenever a new release with security vulnerability fixes becomes available. Critical patch updates, which contain security vulnerability fixes, are announced one year in advance on Critical Patch Updates, Security Alerts and Third Party Bulletin. This JRE (version 7u55) will expire with the release of the next critical patch update scheduled for July 15, 2014. For systems unable to reach the Oracle Servers, a secondary mechanism expires this JRE (version 7u55) on August 15, 2014. After either condition is met (new release becoming available or expiration date reached), the JRE will provide additional warnings and reminders to users to update to the newer version. For more information, see JRE Expiration Date.Ou seja, a versão 7u55 irá expirar com o lançamento do próximo release CPU, pré-agendado para o dia 15 de Julho de 2014. E caso o computador do usuário não possa se comunicar com o servidor da Oracle, esta versão irá expirar forçadamente no dia 15 de Agosto de 2014 (através de um mecanismo embutido na versão 7u55). O usuário não é obrigado a atualizar para versões LFR e portanto, mesmo com o release da versão 7u60, a versão atual 7u55 não irá expirar.Veja o release notes do Oracle Java SE 8 update 5. Encontrei um bug. Como posso reportar bugs ou problemas no Java SE, para a Oracle?Sempre que possível, faça testes com os binários beta antes da versão final ser lançada. Qualquer problema que você encontrar com estes binários beta, por favor descreva o problema através do fórum de Project Feebdack do JDK.Caso você encontre algum problema em uma versão final do Java, utilize o formulário de Bug Report. Importante: bugs reportados por estes sistemas não são considerados Suporte e portanto não há SLA de atendimento. A Oracle reserva o direito de manter o bug público ou privado, e também de informar ou não o usuário sobre o progresso da resolução do problema. Tenho uma dúvida que não foi respondida aqui. Como faço?Se você possui uma pergunta que não foi respondida aqui, envie para bruno.borges_at_oracle.com e caso ela seja pertinente, tentarei responder neste artigo. Para outras dúvidas, entre em contato pelo meu Twitter @brunoborges.

Read the article

CDN on Hosted Service in Windows Azure

- by Shaun

Yesterday I told Wang Tao, an annoying colleague sitting beside me, about how to make the static content enable the CDN in his website which had just been published on Windows Azure. The approach would be Move the static content, the images, CSS files, etc. into the blob storage. Enable the CDN on his storage account. Change the URL of those static files to the CDN URL. I think these are the very common steps when using CDN. But this morning I found that the new Windows Azure SDK 1.4 and new Windows Azure Developer Portal had just been published announced at the Windows Azure Blog. One of the new features in this release is about the CDN, which means we can enabled the CDN not only for a storage account, but a hosted service as well. Within this new feature the steps I mentioned above would be turned simpler a lot. Enable CDN for Hosted Service To enable the CDN for a hosted service we just need to log on the Windows Azure Developer Portal. Under the “Hosted Services, Storage Accounts & CDN” item we will find a new menu on the left hand side said “CDN”, where we can manage the CDN for storage account and hosted service. As we can see the hosted services and storage accounts are all listed in my subscriptions. To enable a CDN for a hosted service is veru simple, just select a hosted service and click the New Endpoint button on top. In this dialog we can select the subscription and the storage account, or the hosted service we want the CDN to be enabled. If we selected the hosted service, like I did in the image above, the “Source URL for the CDN endpoint” will be shown automatically. This means the windows azure platform will make all contents under the “/cdn” folder as CDN enabled. But we cannot change the value at the moment. The following 3 checkboxes next to the URL are: Enable CDN: Enable or disable the CDN. HTTPS: If we need to use HTTPS connections check it. Query String: If we are caching content from a hosted service and we are using query strings to specify the content to be retrieved, check it. Just click the “Create” button to let the windows azure create the CDN for our hosted service. The CDN would be available within 60 minutes as Microsoft mentioned. My experience is that about 15 minutes the CDN could be used and we can find the CDN URL in the portal as well. Put the Content in CDN in Hosted Service Let’s create a simple windows azure project in Visual Studio with a MVC 2 Web Role. When we created the CDN mentioned above the source URL of CDN endpoint would be under the “/cdn” folder. So in the Visual Studio we create a folder under the website named “cdn” and put some static files there. Then all these files would be cached by CDN if we use the CDN endpoint. The CDN of the hosted service can cache some kind of “dynamic” result with the Query String feature enabled. We create a controller named CdnController and a GetNumber action in it. The routed URL of this controller would be /Cdn/GetNumber which can be CDN-ed as well since the URL said it’s under the “/cdn” folder. In the GetNumber action we just put a number value which specified by parameter into the view model, then the URL could be like /Cdn/GetNumber?number=2. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: 7: namespace MvcWebRole1.Controllers 8: { 9: public class CdnController : Controller 10: { 11: // 12: // GET: /Cdn/ 13: 14: public ActionResult GetNumber(int number) 15: { 16: return View(number); 17: } 18: 19: } 20: } And we add a view to display the number which is super simple. 1: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<int>" %> 2: 3: <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> 4: GetNumber 5: </asp:Content> 6: 7: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 8: 9: <h2>The number is: <% 1: : Model.ToString() %></h2> 10: 11: </asp:Content> Since this action is under the CdnController the URL would be under the “/cdn” folder which means it can be CDN-ed. And since we checked the “Query String” the content of this dynamic page will be cached by its query string. So if I use the CDN URL, http://az25311.vo.msecnd.net/GetNumber?number=2, the CDN will firstly check if there’s any content cached with the key “GetNumber?number=2”. If yes then the CDN will return the content directly; otherwise it will connect to the hosted service, http://aurora-sys.cloudapp.net/Cdn/GetNumber?number=2, and then send the result back to the browser and cached in CDN. But to be notice that the query string are treated as string when used by the key of CDN element. This means the URLs below would be cached in 2 elements in CDN: http://az25311.vo.msecnd.net/GetNumber?number=2&page=1 http://az25311.vo.msecnd.net/GetNumber?page=1&number=2 The final step is to upload the project onto azure. Test the Hosted Service CDN After published the project on azure, we can use the CDN in the website. The CDN endpoint we had created is az25311.vo.msecnd.net so all files under the “/cdn” folder can be requested with it. Let’s have a try on the sample.htm and c_great_wall.jpg static files. Also we can request the dynamic page GetNumber with the query string with the CDN endpoint. And if we refresh this page it will be shown very quickly since the content comes from the CDN without MCV server side process. We style of this page was missing. This is because the CSS file was not includes in the “/cdn” folder so the page cannot retrieve the CSS file from the CDN URL. Summary In this post I introduced the new feature in Windows Azure CDN with the release of Windows Azure SDK 1.4 and new Developer Portal. With the CDN of the Hosted Service we can just put the static resources under a “/cdn” folder so that the CDN can cache them automatically and no need to put then into the blob storage. Also it support caching the dynamic content with the Query String feature. So that we can cache some parts of the web page by using the UserController and CDN. For example we can cache the log on user control in the master page so that the log on part will be loaded super-fast. There are some other new features within this release you can find here. And for more detailed information about the Windows Azure CDN please have a look here as well. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Career development as a Software Developer without becoming a manager.

- by albertpascual

I’m a developer, I like to write new exciting code everyday, my perfect day at work is a day that when I wake up, I know that I have to write some code that I haven’t done before or to use a new framework/language/platform that is unknown to me. The best days in the office is when a project is waiting for me to architect or write. In my 15 years in the development field, I had to in order to get a better salary to manage people, not just to lead developers, to actually manage people. Something that I found out when I get into a management position is that I’m not that good at managing people, and not afraid to say it. I do not enjoy that part of the job, the worse one, takes time away from what I really like. Leading developers and managing people are very different things. I do like teaching and leading developers in a project. Yet most people believe, and is true in most companies, the way to get a better salary is to be promoted to a manager position. In order to advance in your career you need to let go of the everyday writing code and become a supervisor or manager. This is the path for developers after they become senior developers. As you get older and your family grows, the only way to hit your salary requirements is to advance your career to become a manager and get that manager salary. That path is the common in most companies, the most intelligent companies out there, have learned that promoting good developers mean getting a crappy manager and losing a good resource. Now scratch everything I said, because as I previously stated, I don’t see myself going to the office everyday and just managing people until is time to go home. I like to spend hours working in some code to accomplish a task, learning new platforms and languages or patterns to existing languages. Being interrupted every 15 minutes by emails or people stopping by my office to resolve their problems, is not something I could enjoy. All the sudden riding my motorcycle to work one cold morning over the Redlands Canyon and listening to .NET Rocks podcast, Michael “Doc” Norton explaining how to take control of your development career without necessary going to the manager’s track. I know, I should not have headphones under my helmet when riding a motorcycle in California. His conversation with Carl Franklin and Richard Campbell was just confirming everything I have ever did with actually more details and assuring that there are other paths. His method was simple yet most of us, already do many of those steps, Mr. Michael “Doc” Norton believe that it pays off on the long run, that finally companies prefer to pay higher salaries to those developers, yet I would actually think that many companies do not see developers that way, this is not true for bigger companies. However I do believe the value of those developers increase and most of the time, changing companies could increase their salary instead of staying in the same one. In short without even trying to get into the shadow of Mr. Norton and without following the steps in the order; you should love to learn new technologies, and then teach them to other geeks. I personally have learn many technologies and I haven’t stop doing that, I am a professor at UCR where I teach ASP.NET and Silverlight. Mr Norton continues that after than, you want to be involve in the development community, user groups, online forums, open source projects. I personally talk to user groups, I’m very active in forums asking and answering questions as well as for those I got awarded the Microsoft MVP for ASP.NET. After you accomplish all those, you should also expose yourself for what you know and what you do not know, learning a new language will make you humble again as well as extremely happy. There is no better feeling that learning a new language or pattern in your daily job. If you love your job everyday and what you do, I really recommend you to follow Michael’s presentation that he kindly share it on the link below. His confirmation is a refreshing, knowing that my future is not behind a desk where the computer screen is on my right hand side instead of in front of me. Where I don’t have to spent the days filling up performance forms for people and the new platforms that I haven’t been using yet are just at my fingertips. Presentation here. http://www.slideshare.net/LeanDog/take-control-of-your-development-career-michael-doc-norton?from=share_email_logout3 Take Control of Your Development Career Welcome! Michael “Doc” Norton @DocOnDev http://docondev.blogspot.com/ [email protected] Recovering Post Technical I love to learn I love to teach I love to work in teams I love to write code I really love to write code What about YOU? Do you love your job? Do you love your Employer? Do you love your Boss? What do you love? What do you really love? Take Control Take Control • Get Noticed • Get Together • Get Your Mojo • Get Naked • Get Schooled Get Noticed Get Noticed Know Your Business Get Noticed Get Noticed Understand Management Get Noticed Get Noticed Do Your Existing Job Get Noticed Get Noticed Make Yourself Expendable Get Together Get Together Join a User Group Get Together Help Run a User Group Get Together Start a User Group Get Your Mojo Get Your Mojo Kata Get Your Mojo Koans Get Your Mojo Breakable Toys Get Your Mojo Open Source Get Naked Get Naked Run with Group A Get Naked Do Something Different Get Naked Own Your Mistakes Get Naked Admit You Don’t Know Get Schooled Get Schooled Choose a Mentor Get Schooled Attend Conferences Get Schooled Teach a New Subject Get Started Read These (Again) Take Control of Your Development Career Thank You! Michael “Doc” Norton @DocOnDev http://docondev.blogspot.com/ [email protected] In a short summary, I recommend any developer to check his blog and more important his presentation, I haven’t been lucky enough to watch him live, I’m looking forward the day I have the opportunity. He is giving us hope in the future of developers, when I see some of my geek friends moving to position that in short years they begin to regret, I get more unsure of my future doing what I love. I would say that now is looking at the spectrum of companies that understand and appreciate developers. There are a few there, hopefully with time code sweat shops will start disappearing and being a developer will feed a family of 4. Cheers Al tweetmeme_url = 'http://weblogs.asp.net/albertpascual/archive/2010/12/07/career-development-as-a-software-developer-without-becoming-a-manager.aspx'; tweetmeme_source = 'alpascual';

Read the article

Creating A SharePoint Parent/Child List Relationship– SharePoint 2010 Edition

- by Mark Rackley

Hey blog readers… It has been almost 2 years since I posted my most read blog on creating a Parent/Child list relationship in SharePoint 2007: Creating a SharePoint List Parent / Child Relationship - Out of the Box And then a year ago I improved on my method and redid the blog post… still for SharePoint 2007: Creating a SharePoint List Parent/Child Relationship – VIDEO REMIX Since then many of you have been asking me how to get this to work in SharePoint 2010, and frankly I have just not had time to look into it. I wish I could have jumped into this sooner, but have just recently began to look at it. Well.. after all this time I have actually come up with two solutions that work, neither of them are as clean as I’d like them to be, but I wanted to get something in your hands that you can start using today. Hopefully in the coming weeks and months I’ll be able to improve upon this further and give you guys some better options. For the most part, the process is identical to the 2007 process, but you have probably found out that the list view web parts in 2010 behave differently, and getting the Parent ID to your new child form can be a pain in the rear (at least that’s what I’ve discovered). Anyway, like I said, I have found a couple of solutions that work. If you know of a better one, please let us know as it bugs me that this not as eloquent as my 2007 implementation. Getting on the same page First thing I’d recommend is recreating this blog: Creating a SharePoint List Parent/Child Relationship – VIDEO REMIX in SharePoint 2010… There are some vague differences, but it’s basically the same… Here’s a quick video of me doing this in SP 2010: Creating Lists necessary for this blog post Now that you have the lists created, lets set up the New Time form to use a QueryString variable to populate the Parent ID field: Creating parameters in Child’s new item form to set parent ID Did I talk fast enough through both of those videos? Hopefully by now that stuff is old hat to you, but I wanted to make sure everyone could get on the same page. Okay… let’s get started. Solution 1 – XSLTListView with Javascript This solution is the more elegant of the two, however it does require the use of a little javascript. The other solution does not use javascript, but it also doesn’t use the pretty new SP 2010 pop-ups. I’ll let you decide which you like better. The basic steps of this solution are: Inserted a Related Item View Insert a ContentEditorWebPart Insert script in ContentEditorWebPart that pulls the ID from the Query string and calls the method to insert a new item on the child entry form Hide the toolbar from data view to remove “add new item” link. Again, you don’t HAVE to use a CEWP, you could just put the javascript directly in the page using SPD. Anyway, here is how I did it: Using Related Item View / JavaScript Here’s the JavaScript I used in my Content Editor Web Part: <script type="text/javascript"> function NewTime() { // Get the Query String values and split them out into the vals array var vals = new Object(); var qs = location.search.substring(1, location.search.length); var args = qs.split("&"); for (var i=0; i < args.length; i++) { var nameVal = args[i].split("="); var temp = unescape(nameVal[1]).split('+'); nameVal[1] = temp.join(' '); vals[nameVal[0]] = nameVal[1]; } var issueID = vals["ID"]; //use this to bring up the pretty pop up NewItem2(event,"http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID=" + issueID); //use this to open a new window //window.location="http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID=" + issueID; } </script> Solution 2 – DataFormWebPart and exact same 2007 Process This solution is a little more of a hack, but it also MUCH more close to the process we did in SP 2007. So, if you don’t mind not having the pretty pop-up and prefer the comforts of what you are used to, you can give this one a try. The basics steps are: Insert a DataFormWebPart instead of the List Data View Create a Parameter on DataFormWebPart to store “ID” Query String Variable Filter DataFormWebPart using Parameter Insert a link at bottom of DataForm Web part that points to the Child’s new item form and passes in the Parent Id using the Parameter. See.. like I told you, exact same process as in 2007 (except using the DataFormWeb Part). The DataFormWebPart also requires a lot more work to make it look “pretty” but it’s just table rows and cells, and can be configured pretty painlessly. Here is that video: Using DataForm Web Part One quick update… if you change the link in this solution from: <tr> <td><a href="http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID={$IssueIDParam}">Click here to create new item...</a> </td> </tr> to: <tr> <td> <a href="javascript:NewItem2(event,'http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID={$IssueIDParam}');">Click here to create new item...</a> </td> </tr> It will open up in the pretty pop up and act the same as solution one… So… both Solutions will now behave the same to the end user. Just depends on which you want to implement. That’s all for now… Remember in both solutions when you have them working, you can make the “IssueID” invisible to users by using the “ms-hidden” class (it’s my previous blog post on the subject up there). That’s basically all there is to it! No pithy or witty closing this time… I am sorry it took me so long to dive into this and I hope your questions are answered. As I become more polished myself I will try to come up with a cleaner solution that will make everyone happy… As always, thanks for taking the time to stop by.

Read the article

Windows 2008 RenderFarm Service: CreateProcessAsUser "Session 0 Isolation" and OpenGL

- by holtavolt

Hello, I have a legacy Windows server service and (spawned) application that works fine in XP-64 and W2K3, but fails on W2K8. I believe it is because of the new "Session 0 isolation " feature. (Note: As a StackOverflow newbie I'm being limited to one link in this post, so you'll need to scroll to bottom to lookup the links for '' items)* Consequently, I'm looking for code samples/security settings mojo that let you create a new process from a windows service for Windows 2008 Server such that I can restore (and possibly surpass) the previous behavior. I need a solution that: Creates the new process in a non-zero session to get around session-0 isolation restrictions (no access to graphics hardware from session 0) - the official MS line on this is: Because Session 0 is no longer a user session, services that are running in Session 0 do not have access to the video driver. This means that any attempt that a service makes to render graphics fails. Querying the display resolution and color depth in Session 0 reports the correct results for the system up to a maximum of 1920x1200 at 32 bits per pixel. The new process gets a windows station/desktop (e.g. winsta0/default) that can be used to create windows DCs. I've found a solution (that launches OK in an interactive session) for this here: *(Starting an Interactive Client Process in C++ - 2) The windows DC, when used as the basis for an *(OpenGL DescribePixelFormat enumeration - 3), is able to find and use the hardware-accelerated format (on a system appropriately equipped with OpenGL hardware.) Note that our current solution works OK on XP-64 and W2K3, except if a terminal services session is running (VNC works fine.) A solution that also allowed the process to work (i.e. run with OpenGL hardware acceleration even when a terminal services session is open) would be fanastic, although not required. I'm stuck at item #1 currently, and although there are some similar postings that discuss this (like *(this -4), and *(this - 5) - they are not suitable solutions, as there is no guarantee of a user session logged in already to "take" a session id from, nor am I running from a LocalSystem account (I'm running from a domain account for the service, for which I can adjust the privileges of, within reason, although I'd prefer to not have to escalate priorities to include SeTcbPrivileges.) For instance - here's a stub that I think should work, but always returns an error 1314 on the SetTokenInformation call (even though the AdjustTokenPrivileges returned no errors) I've used some alternate strategies involving "LogonUser" as well (instead of opening the existing process token), but I can't seem to swap out the session id. I'm also dubious about using the WTSActiveConsoleSessionId in all cases (for instance, if no interactive user is logged in) - although a quick test of the service running with no sessions logged in seemed to return a reasonable session value (1). I’ve removed error handling for ease of reading (still a bit messy - apologies) //Also tried using LogonUser(..) here OpenProcessToken(GetCurrentProcess(), TOKEN_QUERY | TOKEN_ADJUST_PRIVILEGES | TOKEN_ADJUST_SESSIONID | TOKEN_ADJUST_DEFAULT | TOKEN_ASSIGN_PRIMARY | TOKEN_DUPLICATE, &hToken) GetTokenInformation( hToken, TokenSessionId, &logonSessionId, sizeof(DWORD), &dwTokenLength ) DWORD consoleSessionId = WTSGetActiveConsoleSessionId(); /* Can't use this - requires very elevated privileges (LOCAL only, SeTcbPrivileges as well) if( !WTSQueryUserToken(consoleSessionId, &hToken)) ... */ DuplicateTokenEx(hToken, (TOKEN_QUERY | TOKEN_ADJUST_PRIVILEGES | TOKEN_ADJUST_SESSIONID | TOKEN_ADJUST_DEFAULT | TOKEN_ASSIGN_PRIMARY | TOKEN_DUPLICATE), NULL, SecurityIdentification, TokenPrimary, &hDupToken)) // Look up the LUID for the TCB Name privilege. LookupPrivilegeValue(NULL, SE_TCB_NAME, &tp.Privileges[0].Luid)) // Enable the TCB Name privilege in the token. tp.PrivilegeCount = 1; tp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED; if (!AdjustTokenPrivileges(hDupToken, FALSE, &tp, sizeof(TOKEN_PRIVILEGES), NULL, 0)) { DisplayError("AdjustTokenPrivileges"); ... } if (GetLastError() == ERROR_NOT_ALL_ASSIGNED) { DEBUG( "Token does not have the necessary privilege.\n"); } else { DEBUG( "No error reported from AdjustTokenPrivileges!\n"); } // Never errors here DEBUG(LM_INFO, "Attempting setting of sessionId to: %d\n", consoleSessionId ); if (!SetTokenInformation(hDupToken, TokenSessionId, &consoleSessionId, sizeof(DWORD))) *** ALWAYS FAILS WITH 1314 HERE *** All the debug output looks fine up until the SetTokenInformation call - I see session 0 is my current process session, and in my case, it's trying to set session 1 (the result of the WTSGetActiveConsoleSessionId). (Note that I'm logged into the W2K8 box via VNC, not RDC) So - a the questions: Is this approach valid, or are all service-initiated processes restricted to session 0 intentionally? Is there a better approach (short of "Launch on logon" and auto-logon for the servers?) Is there something wrong with this code, or a different way to create a process token where I can swap out the session id to indicate I want to spawn the process in a new session? I did try using LogonUser instead of OpenProcessToken, but that didn't work either. (I don't care if all spawned processes share the same non-zero session or not at this point.) Any help much appreciated - thanks! (You need to replace the 'zttp' with 'http' - StackOverflow restriction on one link in my newbie post) 2: http://msdn.microsoft.com/en-us/library/aa379608(VS.85).aspx 3: http://www.opengl.org/resources/faq/technical/mswindows.htm 4: http://stackoverflow.com/questions/2237696/creating-a-process-in-a-non-zero-session-from-a-service-in-windows-2008-server 5: http://stackoverflow.com/questions/1602996/how-can-i-lauch-a-process-which-has-a-ui-from-windows-service

Read the article

Norton Ghost EBAB03F1: The specified network name is no longer available

- by Breck Carter

After about 15 minutes, a Norton Ghost 14 backup fails with Error EBAB03F1: The specified network name is no longer available. The source computer is a P4 laptop running Windows XP SP3. The target computer is a Core2 Quad desktop running Windows Vista Ultimate 64bit. It does not help to disable Norton 360 on the source computer or Norton Antivirus 2008 on the target computer. The Event Viewer consistently shows the same two VSS-related errors after Norton Ghost starts but before it fails. It makes no difference if the VSS service is started or stopped. The VSS errors do not appear elsewhere in the event log, only after Ghost starts. The MSS event messages, however, are quite common, appearing throughout the log, and they may have nothing to do with the problem. Here is the Norton Ghost error display... -Errors exist. --Unable to write to file. ---Error EBAB03F1: The specified network name is no longer available. ---Unable to set file size. ----Error EBAB03F1: The specified network name is no longer available. ----Unable to write to file. -----Error EBAB03F1: The specified network name is no longer available. -----Unable to set file size. ------Error EBAB03F1: The specified network name is no longer available. Here are the source computer events, with the final error at the top and the "Ghost Starting" message at the bottom: ===== Event Type: Error Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:40:26 AM User: N/A Computer: PAVILION2 Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (C:\) (3). Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Error E7D1001F: Unable to write to file. Error EBAB03F1: The specified network name is no longer available. Error E7D10046: Unable to set file size. Error EBAB03F1: The specified network name is no longer available. Details: 0xEBAB0005 Source: Norton Ghost ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 3421 Date: 11/09/2009 Time: 9:34:06 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Recovery completed for database ReportServer$SQLEXPRESSTempDB (database ID 6) in 1 second(s) (analysis 205 ms, redo 0 ms, undo 376 ms.) This is an informational message only. No user action is required. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5d 0d 00 00 0a 00 00 00 ]....... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Information Event Source: MSSQL$SQLEXPRESS Event Category: Server Event ID: 17137 Date: 11/09/2009 Time: 9:34:02 AM User: NT AUTHORITY\NETWORK SERVICE Computer: PAVILION2 Description: Starting up database 'ReportServer$SQLEXPRESSTempDB'. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: f1 42 00 00 0a 00 00 00 ñB...... 0008: 15 00 00 00 50 00 41 00 ....P.A. 0010: 56 00 49 00 4c 00 49 00 V.I.L.I. 0018: 4f 00 4e 00 32 00 5c 00 O.N.2.\. 0020: 53 00 51 00 4c 00 45 00 S.Q.L.E. 0028: 58 00 50 00 52 00 45 00 X.P.R.E. 0030: 53 00 53 00 00 00 18 00 S.S..... 0038: 00 00 52 00 65 00 70 00 ..R.e.p. 0040: 6f 00 72 00 74 00 53 00 o.r.t.S. 0048: 65 00 72 00 76 00 65 00 e.r.v.e. 0050: 72 00 24 00 53 00 51 00 r.$.S.Q. 0058: 4c 00 45 00 58 00 50 00 L.E.X.P. 0060: 52 00 45 00 53 00 53 00 R.E.S.S. 0068: 00 00 .. ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 5013 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: Shadow Copy writer ContentIndexingService called routine RegQueryValueExW which failed with status 0x80070002 (converted to 0x800423f4). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 57 53 48 43 4f 4d 4e 43 WSHCOMNC 0008: 32 32 39 32 00 00 00 00 2292.... 0010: 57 53 48 43 49 43 00 00 WSHCIC.. 0018: 32 38 37 00 00 00 00 00 287..... ===== Event Type: Error Event Source: VSS Event Category: None Event ID: 12302 Date: 11/09/2009 Time: 9:28:32 AM User: N/A Computer: PAVILION2 Description: Volume Shadow Copy Service error: An internal inconsistency was detected in trying to contact shadow copy service writers. Please check to see that the Event Service and Volume Shadow Copy Service are operating properly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 42 55 45 43 58 4d 4c 43 BUECXMLC 0008: 33 36 33 37 00 00 00 00 3637.... 0010: 42 55 45 43 58 4d 4c 43 BUECXMLC 0018: 33 36 30 37 00 00 00 00 3607.... ===== Event Type: Information Event Source: Norton Ghost Event Category: High Priority Event ID: 100 Date: 11/09/2009 Time: 9:27:57 AM User: N/A Computer: PAVILION2 Description: Info 6C8F1F63: The drive-based backup job, Drive Backup of (C:\) (3), has been started manually. Details: Source: Norton Ghost

Read the article

Custom Glassfish Security Realm does not work (unable to find LoginModule)

- by ifischer

I'm trying to get a Custom Security Realm in Glassfish working (i tried 3.0.1 final and 3.1 B33). I read nearly all tutorials about this, but it doesn not work on my System. I'm getting the error Login failed: javax.security.auth.login.LoginException: unable to find LoginModule class: de.company.security.utility.CustomLoginModule when trying to login. Here is what i did: I created a little Maven project, which contains the needed Realm class, CustomRealm, and the corresponding LoginModule, CustomLoginModule. My pom.xml: <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.mycompany</groupId> <artifactId>CustomJDBCRealm</artifactId> <version>1.0-SNAPSHOT</version> <packaging>jar</packaging> <name>Custom JDBCRealm</name> <url>http://maven.apache.org</url> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> </properties> <dependencies> <dependency> <groupId>org.glassfish.security</groupId> <artifactId>security</artifactId> <version>3.1-b33</version> </dependency> </dependencies> <build> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <configuration> <source>1.6</source> <target>1.6</target> <optimise>true</optimise> <debug>true</debug> <encoding>UTF-8</encoding> </configuration> </plugin> </plugins> </build> </project> My Custom Realm class: package de.company.security.utility; import com.sun.appserv.security.AppservRealm; import com.sun.enterprise.security.auth.realm.BadRealmException; import com.sun.enterprise.security.auth.realm.InvalidOperationException; import com.sun.enterprise.security.auth.realm.NoSuchRealmException; import com.sun.enterprise.security.auth.realm.NoSuchUserException; import java.util.Enumeration; import java.util.Properties; import java.util.Vector; /** * * @author ifischer */ public class CustomRealm extends AppservRealm { Vector<String> groups = new Vector<String>(); private String jaasCtxName; private String startWith; @Override public void init(Properties properties) throws BadRealmException, NoSuchRealmException { jaasCtxName = properties.getProperty("jaas-context", "customRealm"); startWith = properties.getProperty("startWith", "z"); groups.add("dummy"); } @Override public String getAuthType() { return "Custom Realm"; } public String[] authenticate(String username, char[] password) { // if (isValidLogin(username, password)) return (String[]) groups.toArray(); } @Override public Enumeration getGroupNames(String username) throws InvalidOperationException, NoSuchUserException { return groups.elements(); } @Override public String getJAASContext() { return jaasCtxName; } public String getStartWith() { return startWith; } } My LoginModule class: /* * Copyright (c) 2010 ProfitBricks GmbH. All Rights Reserved. */ package de.company.security.utility; import com.sun.appserv.security.AppservPasswordLoginModule; import com.sun.enterprise.security.auth.login.common.LoginException; import java.util.Set; import org.glassfish.security.common.PrincipalImpl; /** * * @author ifischer */ public class CustomLoginModule extends AppservPasswordLoginModule { @Override protected void authenticateUser() throws LoginException { _logger.info("CustomRealm : authenticateUser for " + _username); final CustomRealm realm = (CustomRealm)_currentRealm; if ( (_username == null) || (_username.length() == 0) || !_username.startsWith(realm.getStartWith())) throw new LoginException("Invalid credentials"); String[] grpList = realm.authenticate(_username, getPasswordChar()); if (grpList == null) { throw new LoginException("User not in groups"); } _logger.info("CustomRealm : authenticateUser for " + _username); Set principals = _subject.getPrincipals(); principals.add(new PrincipalImpl(_username)); this.commitUserAuthentication(grpList); } } I compiled this Maven project and copyied the resulting JAR-file to the Glassfish/lib directory. Then i added the Security Realm "customRealm" to my Glassfish with asadmin: asadmin create-auth-realm --classname de.company.security.utility.CustomRealm --property jaas-context=customRealm:startWith=a customRealm I even referenced the LoginModule class for the JAAS context of my Custom Realm, therefore i inserted this into the login.conf of my domain: customRealm { de.company.security.utility.CustomLoginModule required; }; Although this LoginModule SHOULD BE on the Glassfish classpath, as it's classfiled is packaged in the JAR that i put into the Glassfish/lib-dir, it cannot be found when i try to login. For login, i build a really simple JSF-project, which calls the HttpServletRequest-login-method of Servlet 3.0. When trying to login i'm getting the following Exception: 2010-12-24T14:41:31.613+0100|WARNING|glassfish3.0.1| javax.enterprise.system.container.web.com.sun.web.security|_ThreadID=25; _ThreadName=Thread-1;|Web login failed: Login failed: javax.security.auth.login.LoginException: unable to find LoginModule class: de.company.security.utility.CustomLoginModule Anybody got an idea what i can do that Glassfish loads the LoginModule-class?

Read the article

SQL SERVER – Import CSV into Database – Transferring File Content into a Database Table using CSVexpress

- by pinaldave

One of the most common data integration tasks I run into is a desire to move data from a file into a database table. Generally the user is familiar with his data, the structure of the file, and the database table, but is unfamiliar with data integration tools and therefore views this task as something that is difficult. What these users really need is a point and click approach that minimizes the learning curve for the data integration tool. This is what CSVexpress (www.CSVexpress.com) is all about! It is based on expressor Studio, a data integration tool I’ve been reviewing over the last several months. With CSVexpress, moving data between data sources can be as simple as providing the database connection details, describing the structure of the incoming and outgoing data and then connecting two pre-programmed operators. There’s no need to learn the intricacies of the data integration tool or to write code. Let’s look at an example. Suppose I have a comma separated value data file with data similar to the following, which is a listing of terminated employees that includes their hiring and termination date, department, job description, and final salary. EMP_ID,STRT_DATE,END_DATE,JOB_ID,DEPT_ID,SALARY 102,13-JAN-93,24-JUL-98 17:00,Programmer,60,"$85,000" 101,21-SEP-89,27-OCT-93 17:00,Account Representative,110,"$65,000" 103,28-OCT-93,15-MAR-97 17:00,Account Manager,110,"$75,000" 304,17-FEB-96,19-DEC-99 17:00,Marketing,20,"$45,000" 333,24-MAR-98,31-DEC-99 17:00,Data Entry Clerk,50,"$35,000" 100,17-SEP-87,17-JUN-93 17:00,Administrative Assistant,90,"$40,000" 334,24-MAR-98,31-DEC-98 17:00,Sales Representative,80,"$40,000" 400,01-JAN-99,31-DEC-99 17:00,Sales Manager,80,"$55,000" Notice the concise format used for the date values, the fact that the termination date includes both date and time information, and that the salary is clearly identified as money by the dollar sign and digit grouping. In moving this data to a database table I want to express the dates using a format that includes the century since it’s obvious that this listing could include employees who left the company in both the 20th and 21st centuries, and I want the salary to be stored as a decimal value without the currency symbol and grouping character. Most data integration tools would require coding within a transformation operation to effect these changes, but not expressor Studio. Directives for these modifications are included in the description of the incoming data. Besides starting the expressor Studio tool and opening a project, the first step is to create connection artifacts, which describe to expressor where data is stored. For this example, two connection artifacts are required: a file connection, which encapsulates the file system location of my file; and a database connection, which encapsulates the database connection information. With expressor Studio, I use wizards to create these artifacts. First click New Connection > File Connection in the Home tab of expressor Studio’s ribbon bar, which starts the File Connection wizard. In the first window, I enter the path to the directory that contains the input file. Note that the file connection artifact only specifies the file system location, not the name of the file. Then I click Next and enter a meaningful name for this connection artifact; clicking Finish closes the wizard and saves the artifact. To create the Database Connection artifact, I must know the location of, or instance name, of the target database and have the credentials of an account with sufficient privileges to write to the target table. To use expressor Studio’s features to the fullest, this account should also have the authority to create a table. I click the New Connection > Database Connection in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard. expressor Studio includes high-performance drivers for many relational database management systems, so I can simply make a selection from the “Supplied database drivers” drop down control. If my desired RDBMS isn’t listed, I can optionally use an existing ODBC DSN by selecting the “Existing DSN” radio button. In the following window, I enter the connection details. With Microsoft SQL Server, I may choose to use Windows Authentication rather than rather than account credentials. After clicking Next, I enter a meaningful name for this connection artifact and clicking Finish closes the wizard and saves the artifact. Now I create a schema artifact, which describes the structure of the file data. When expressor reads a file, all data fields are typed as strings. In some use cases this may be exactly what is needed and there is no need to edit the schema artifact. But in this example, editing the schema artifact will be used to specify how the data should be transformed; that is, reformat the dates to include century designations, change the employee and job ID’s to integers, and convert the salary to a decimal value. Again a wizard is used to create the schema artifact. I click New Schema > Delimited Schema in the Home tab of expressor Studio’s ribbon bar, which starts the Database Connection wizard. In the first window, I click Get Data from File, which then displays a listing of the file connections in the project. When I click on the file connection I previously created, a browse window opens to this file system location; I then select the file and click Open, which imports 10 lines from the file into the wizard. I now view the file’s content and confirm that the appropriate delimiter characters are selected in the “Field Delimiter” and “Record Delimiter” drop down controls; then I click Next. Since the input file includes a header row, I can easily indicate that fields in the file should be identified through the corresponding header value by clicking “Set All Names from Selected Row. “ Alternatively, I could enter a different identifier into the Field Details > Name text box. I click Next and enter a meaningful name for this schema artifact; clicking Finish closes the wizard and saves the artifact. Now I open the schema artifact in the schema editor. When I first view the schema’s content, I note that the types of all attributes in the Semantic Type (the right-hand panel) are strings and that the attribute names are the same as the field names in the data file. To change an attribute’s name and type, I highlight the attribute and click Edit in the Attributes grouping on the Schema > Edit tab of the editor’s ribbon bar. This opens the Edit Attribute window; I can change the attribute name and select the desired type from the “Data type” drop down control. In this example, I change the name of each attribute to the name of the corresponding database table column (EmployeeID, StartingDate, TerminationDate, JobDescription, DepartmentID, and FinalSalary). Then for the EmployeeID and DepartmentID attributes, I select Integer as the data type, for the StartingDate and TerminationDate attributes, I select Datetime as the data type, and for the FinalSalary attribute, I select the Decimal type. But I can do much more in the schema editor. For the datetime attributes, I can set a constraint that ensures that the data adheres to some predetermined specifications; a starting date must be later than January 1, 1980 (the date on which the company began operations) and a termination date must be earlier than 11:59 PM on December 31, 1999. I simply select the appropriate constraint and enter the value (1980-01-01 00:00 as the starting date and 1999-12-31 11:59 as the termination date). As a last step in setting up these datetime conversions, I edit the mapping, describing the format of each datetime type in the source file. I highlight the mapping line for the StartingDate attribute and click Edit Mapping in the Mappings grouping on the Schema > Edit tab of the editor’s ribbon bar. This opens the Edit Mapping window in which I either enter, or select, a format that describes how the datetime values are represented in the file. Note the use of Y01 as the syntax for the year. This syntax is the indicator to expressor Studio to derive the century by setting any year later than 01 to the 20th century and any year before 01 to the 21st century. As each datetime value is read from the file, the year values are transformed into century and year values. For the TerminationDate attribute, my format also indicates that the datetime value includes hours and minutes. And now to the Salary attribute. I open its mapping and in the Edit Mapping window select the Currency tab and the “Use currency” check box. This indicates that the file data will include the dollar sign (or in Europe the Pound or Euro sign), which should be removed. And on the Grouping tab, I select the “Use grouping” checkbox and enter 3 into the “Group size” text box, a comma into the “Grouping character” text box, and a decimal point into the “Decimal separator” character text box. These entries allow the string to be properly converted into a decimal value. By making these entries into the schema that describes my input file, I’ve specified how I want the data transformed prior to writing to the database table and completely removed the requirement for coding within the data integration application itself. Assembling the data integration application is simple. Onto the canvas I drag the Read File and Write Table operators, connecting the output of the Read File operator to the input of the Write Table operator. Next, I select the Read File operator and its Properties panel opens on the right-hand side of expressor Studio. For each property, I can select an appropriate entry from the corresponding drop down control. Clicking on the button to the right of the “File name” text box opens the file system location specified in the file connection artifact, allowing me to select the appropriate input file. I indicate also that the first row in the file, the header row, should be skipped, and that any record that fails one of the datetime constraints should be skipped. I then select the Write Table operator and in its Properties panel specify the database connection, normal for the “Mode,” and the “Truncate” and “Create Missing Table” options. If my target table does not yet exist, expressor will create the table using the information encapsulated in the schema artifact assigned to the operator. The last task needed to complete the application is to create the schema artifact used by the Write Table operator. This is extremely easy as another wizard is capable of using the schema artifact assigned to the Read Table operator to create a schema artifact for the Write Table operator. In the Write Table Properties panel, I click the drop down control to the right of the “Schema” property and select “New Table Schema from Upstream Output…” from the drop down menu. The wizard first displays the table description and in its second screen asks me to select the database connection artifact that specifies the RDBMS in which the target table will exist. The wizard then connects to the RDBMS and retrieves a list of database schemas from which I make a selection. The fourth screen gives me the opportunity to fine tune the table’s description. In this example, I set the width of the JobDescription column to a maximum of 40 characters and select money as the type of the LastSalary column. I also provide the name for the table. This completes development of the application. The entire application was created through the use of wizards and the required data transformations specified through simple constraints and specifications rather than through coding. To develop this application, I only needed a basic understanding of expressor Studio, a level of expertise that can be gained by working through a few introductory tutorials. expressor Studio is as close to a point and click data integration tool as one could want and I urge you to try this product if you have a need to move data between files or from files to database tables. Check out CSVexpress in more detail. It offers a few basic video tutorials and a preview of expressor Studio 3.5, which will support the reading and writing of data into Salesforce.com. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Documentation, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

Read the article

Windows Azure Myths

- by BuckWoody

Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you. So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

Read the article

Windows Azure Myths

- by BuckWoody

Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you. So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

Read the article

WCF with No security

- by james.ingham

Hi all, I've got a WCF service setup which I can consume and use as intendid... but only on the same machine. I'm looking to get this working over multiple computers and I'm not fussed about the security. However when I set (client side) the security to = none, I get a InvalidOperationException: The service certificate is not provided for target 'http://xxx.xxx.xxx.xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/'. Specify a service certificate in ClientCredentials. So I'm left with: <security mode="Message"> <message clientCredentialType="None" negotiateServiceCredential="false" algorithmSuite="Default" /> </security> But this gives me another InvalidOperationException: The service certificate is not provided for target 'http://xxx.xxx.xxx.xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/'. Specify a service certificate in ClientCredentials. Why would I have to provide a certificate if security was turned off? Server app config: <system.serviceModel> <services> <service name="Server.WcfServiceLibrary.CheckoutService" behaviorConfiguration="Server.WcfServiceLibrary.CheckoutServiceBehavior"> <host> <baseAddresses> <add baseAddress = "http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/CheckoutService/" /> </baseAddresses> </host> <endpoint address ="" binding="wsDualHttpBinding" contract="Server.WcfServiceLibrary.ICheckoutService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> <service name="Server.WcfServiceLibrary.ManagementService" behaviorConfiguration="Server.WcfServiceLibrary.ManagementServiceBehavior"> <host> <baseAddresses> <add baseAddress = "http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/" /> </baseAddresses> </host> <endpoint address ="" binding="wsDualHttpBinding" contract="Server.WcfServiceLibrary.IManagementService"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Server.WcfServiceLibrary.CheckoutServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> <serviceThrottling maxConcurrentCalls="100" maxConcurrentSessions="50" maxConcurrentInstances="50" /> </behavior> <behavior name="Server.WcfServiceLibrary.ManagementServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Client app config: <system.serviceModel> <bindings> <wsDualHttpBinding> <binding name="WSDualHttpBinding_IManagementService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:00:10" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" /> <security mode="Message"> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" /> </security> </binding> </wsDualHttpBinding> </bindings> <client> <endpoint address="http://xxx:8731/Design_Time_Addresses/WcfServiceLibrary/ManagementService/" binding="wsDualHttpBinding" bindingConfiguration="WSDualHttpBinding_IManagementService" contract="ServiceReference.IManagementService" name="WSDualHttpBinding_IManagementService"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> </system.serviceModel> Thanks

Read the article

CodePlex Daily Summary for Wednesday, July 24, 2013

CodePlex Daily Summary for Wednesday, July 24, 2013Popular ReleasesGeoTransformer: GeoTransformer 4.5: Extensions can now be installed and uninstalled from the application. The extensions update the same way as the application - silently and automatically. Added ability to search for caches by pressing CTRL+F in the table views. (Thanks to JanisU for implementing this request) Added ability to remove edited customizations for multiple caches at once (use SHIFT or CTRL to select multiple lines in the table). A new experimental version for Windows 8 RT (on ARM processor) is also made availa...Kartris E-commerce: Kartris v2.5003: This fixes an issue where search engines appear to identify as IE and so trigger the noIE page if there is not a non-responsive skin specified.VG-Ripper & PG-Ripper: VG-Ripper 2.9.45: changes NEW: Added Support for "ImgBabes.com" links NEW: Added Support for "ImagesIon.com" linksFamily Tree Analyzer: Version 1.5.3.0: Added a new Lost Cousins Report to the Lost Cousins tab. This report displays colour coded boxes for each census showing whether census data has been found and entered into Lost Cousins website for all the UK census years.Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.4: Magelia WebStore version 2.4 introduces new and improved features: Basket and order calculation have been redesigned with a more modular approach geographic zone algorithms for tax and shipping calculations have been re-developed. The Store service has been split in three services (store, basket, order). Product start and end dates have been added. For variant products a unique code has been introduced for the top (variable) product, product attributes can now be defined at the top ...LINQ to Twitter: LINQ to Twitter v2.1.08: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.AndroidCopyAndPaste: Capood: Erstes Release für Evaluation --> Changeset 26675AcDown?????: AcDown????? v4.4.3: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.4.3 ?? ??Bilibili????????????? ???????????? ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2.10?...Magick.NET: Magick.NET 6.8.6.601: Magick.NET linked with ImageMagick 6.8.6.6. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/C# Intellisense for Notepad++: Initial release: Members auto-complete Integration with native Notepad++ Auto-Completion Auto "open bracket" for methods Right-arrow to accept suggestions51Degrees.mobi - Mobile Device Detection and Redirection: 2.1.19.4: One Click Install from NuGet This release introduces the 51Degrees.mobi IIS Vary Header Fix. When Compression and Caching is used in IIS, the Vary header is overwritten, making intelligent caching with dynamic content impossible. Find out more about installing the Vary Header fix. Changes to Version 2.1.19.4Handlers now have a ‘Count’ property. This is an integer value that shows how many devices in the dataset that use that handler. Provider.cs -> GetDeviceInfoByID to address a problem w...SalarDbCodeGenerator: SalarDbCodeGenerator v2.1.2013.0719: Version 2.1.2013.0719 2013/7/19 Pattern Changes: * DapperContext pattern is added. * All patterns are updated to work with one-to-one relations. Changes: * One-to-one relation is supported. * Minor bug fixes.PantheR's GraphX for .NET: GraphX for .NET v0.9.5 BETA: BETA 0.9.5 + Added GraphArea.SaveAsImage() method that supports different image formats + Added GraphArea.UseNativeObjectArrange property. True by default. If set to False it will use different coordinates handling that helps to soften vertex drag issues to the top and left area sides. + Added GraphArea.Translation property. It is needed to get correct translation coordinates when determining object position from the mouse coordinates. + Added new VertexControl.PositionChanged event along wit....NET Code Migrator for Dynamics CRM: v1.0.12: Combined the main macros, generated macros from a sample organization, and the CreateVisualStudioMacros utility into a single package.DARF: Dynamic Application Runtime Framework: DARF.Demo: This demo is DARF.IDE application plus a sample file (calculator.xda) which describes a very simple calculator. All you need to do is to unzip the package, run DARF.IDE.exe and load calculator.xda then press F5 or select 'Execute' from 'Code' menu to see the execution of the application. The calculator.xda file is fully commented so you can inspect the file and get a feeling of the way DARF works. This sample application makes use of some pre-written blocks (namely button, textbox and ...) ...Player Framework by Microsoft: Player Framework for Windows and WP (v1.3 beta 2): Includes all changes in v1.3 beta 1 Additional support for Windows 8.1 Preview New API (JS): addTextTrack New API (JS): msKeys New API (JS): msPlayToPreferredSourceUri New API (JS): msSetMediaKeys New API (JS): onmsneedkey New API (Xaml): SetMediaStreamSource method New API (Xaml): Stretch property New API (Xaml): StretchChanged event New API (Xaml): AreTransportControlsEnabled property New API (Xaml): IsFullWindow property New API (Xaml): PlayToPreferredSourceUri proper...CodeGen Code Generator: CodeGen 4.2.11: Changes in this release include: Added several new alternate forms of the <FIELD_SELWND> token to provide template developers better control over the case of field selection window names. Also added a new token <FIELD_SELWND_ORIGINAL> to preserve the case of selection window names in the same way that <FIELD_SELWND> used to. Enhanced UI Toolkit window script selection window processing (-ws) so that selection window names are no longer case sensitive (they aren't in UI Toolkit). Also the -w...Outlook 2013 Add-In: Multiple Calendars: As per popular request, this new version includes: - Support for multiple calendars. This can be enabled in the configuration by choosing which ones to show/hide appointments from. In some cases (public folders) it may time out and crash, and so far it only supports "My Calendars", so not shared ones yet. Also they're currently shown in the same font/color so there are no confusions with color categories, but please drop me a line on any suggestions you'd like to see implemented. - Added fri...Circuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.New Projects.NET Weaver: This project is a base project to weave code in existing assemblies.AAP WB: aam aadmi party west bengal facebook appajax call wcf: it's about how to call wcf use ajax in asp.netBMI: Test ProjectCarWebOOB: Website for learning subject about object oriented databaseCloud Ninja Polyglot Persistence: The Cloud Ninja Polyglot Persistence project is a sample that demonstrates the use of multiple and different types of repositories to persist application data.ConsoleGamePacMan: C# console Implementation of popular game Pac-MancrawlerTeam: crawlerDB-Team-Project-Mimosa: Telerik Database Project Team MimosaDemoJS: Nonedeployspsolution: powershell snapin that mimics publishing behaviour of wsp sharepoint solution in visual studio.Du Lich Thanh Nien: Du L?ch Thanh NiênElectronic Commerce Resource Planning: Electronic Commerce Resource PlanningGnuPGNotepad: A notepad based GUI for GnuPG (PGP) which allows you to Encrypt/Decrypt on the fly, or save & load encrypted to disk without using temporary clear text files.modbusclasslabrarycsharp: Summary MvcAppTestSolution: MVCNext Inventory: NextInventory is an open source application. Native in the ASP.Net MVC4.Org Chart in SharePoint 2010 using Google API.: Organization Chart webpart for SharePoint 2010 using Google API and SharePoint list as the data source. Good for small organizations with no AD hierarchy.Parsec SWTOR Parser: .NET Combat Log Parser Windows Application for SWTOR (Star Wars the Old Republic)Portable Imaging Library for .NET: Portable Imaging Library for asynchronous loading, modifying and saving images from any thread (out of UI thread for WPF/WP8).Powershell MetadataExplorer: Windows Powershell SnapIn that includes the Get-ItemMetadata cmdlet. The Get-ItemMetadata cmdlet retrieves extended metadata associated with file system items.Pseudogenerator: Pseudogenerator es un generador de numeros pseudoaleatorios compatible con una variedad de metodos de generacion. Muy util en el area de simulaciones digitales.PushIt!: Very interesting arcade game.S3Console: This project is an initiative to create shell like interactive console application to administer amazon s3 using c#.net.Sample VariableSizedWrapGrid Windows Phone: This example gives an idea of how to make the size of a list item dynamically. In this case a user control that has been created by VariableSizedWrapGrid kinnSchool CMS: School CMS is a school content management system, written in PHP and run from a single MySQL Database. Anyone can use school cms.Sys: This is library of collection of most used .NET components implemented in C#VariousPublicExperiments: This project contains various experiments, publish for educational purposes. These projects may later on be branched to their own repositories.VBDownloader: *VBDownloader* _The open source solution for downloading_wechat demo: wechat demoZing State Explorer: Zing is a state explorer for models of concurrent and asynchronous programs.

Read the article

JBoss Seam: In ScopeType.PAGE I get: java.lang.IllegalStateException: No conversation context active

- by Markos Fragkakis

Hi all, I have a page-scoped component, which has an instance variable List with data, which I display in a datatable. This datatable has pagination, sorting and filtering. The first time gate into the page, I get this appended in my URL: ?conversationId=97. The page works correctly, and when I change datatable pages no now component is created. After a minute or two, and at seamingly random time, I get an exception saying that there is no context. I have not used @Create in my code or my navigation files. So, I have two questions: Why do I get this suffix in my URL? Why did a conversation start? Why the exception? The component is scoped to PAGE. If I received an exception, it should not be related to a conversation. Right? Or is the conversation the exception is referring a temporary conversation? Cheers! UPDATE: This is the page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core" xmlns:a4j="http://richfaces.org/a4j" xmlns:rich="http://richfaces.org/rich"> <body> <ui:composition template="/WEB-INF/facelets/templates/template.xhtml"> <ui:define name="content">  <script type="text/javascript"> function submitByEnter(event){ if (event.keyCode == 13) { if (event.preventDefault) { // Firefox event.preventDefault(); } else { // IE event.returnValue = false; } document.getElementById("refreshButton").click(); } } </script> <h:form prependId="false"> <h:commandButton action="Back" value="Back to home page" /> <br /> <p><h:outputText value="Applicants and Products (experimentation page)" class="page_title" /></p> <h:commandButton action="#{applicantProductListBean.showCreateApplicant}" value="Create Applicant" id="createApplicantButton"> </h:commandButton> <a4j:commandButton value="Refresh" id="refreshButton" action="#{applicantProductListBean.refreshData}" image="/images/icons/refresh48x48.gif" reRender="compositeTable, compositeScroller">   </a4j:commandButton> <rich:toolTip for="createApplicantButton" value="Create Applicant" /> <rich:dataTable styleClass="composite2DataTable" id="compositeTable" rows="1" columnClasses="col" value="#{applicantProductListBean.dataModel}" var="pageAppList"> <f:facet name="header"> <rich:columnGroup> <rich:column colspan="3"> <h:outputText styleClass="headerText" value="Applicants" /> </rich:column> <rich:column colspan="3"> <h:outputText styleClass="headerText" value="Products" /> </rich:column> <rich:column breakBefore="true"> <h:outputText styleClass="headerText" value="Applicant Name" /> <a4j:commandButton id="sortingApplicantNameButton" action="#{applicantProductListBean.toggleSorting('applicantName')}" image="/images/icons/sorting/#{sortingFilteringBean.applicantProductListSorting.sortingValues['applicantName']}.gif" reRender="sortingApplicantNameButton, sortingApplicantEmailButton, compositeTable, compositeScroller">   </a4j:commandButton> <br /> <h:inputText value="#{sortingFilteringBean.applicantProductListFiltering.filteringValues['applicantName']}" id="applicantNameFilterValue" onkeypress="return submitByEnter(event)"> </h:inputText> </rich:column> <rich:column> <h:outputText styleClass="headerText" value="Applicant Email" /> <a4j:commandButton id="sortingApplicantEmailButton" action="#{applicantProductListBean.toggleSorting('applicantEmail')}" image="/images/icons/sorting/#{sortingFilteringBean.applicantProductListSorting.sortingValues['applicantEmail']}.gif" reRender="sortingApplicantNameButton, sortingApplicantEmailButton, compositeTable, compositeScroller">   </a4j:commandButton> <br /> <h:inputText value="#{sortingFilteringBean.applicantProductListFiltering.filteringValues['applicantEmail']}" id="applicantEmailFilterValue" onkeypress="return submitByEnter(event)"> </h:inputText> </rich:column> <rich:column> <h:outputText styleClass="headerText" value="Applicant Actions" /> </rich:column> <rich:column> <h:outputText styleClass="headerText" value="Product Name" /> <a4j:commandButton id="sortingProductNameButton" action="#{applicantProductListBean.toggleSorting('productName')}" immediate="true" image="/images/icons/sorting/#{sortingFilteringBean.applicantProductListSorting.sortingValues['productName']}.gif" reRender="sortingProductNameButton, compositeTable, compositeScroller"> </a4j:commandButton> <br /> <h:inputText value="#{sortingFilteringBean.applicantProductListFiltering.filteringValues['productName']}" id="productNameFilterValue" onkeypress="return submitByEnter(event)"> </h:inputText> </rich:column> <rich:column> <h:outputText styleClass="headerText" value="Product Email" /> <br /> <h:inputText value="#{sortingFilteringBean.applicantProductListFiltering.filteringValues['productEmail']}" id="productEmailFilterValue" onkeypress="return submitByEnter(event)"> </h:inputText> </rich:column> <rich:column> <h:outputText styleClass="headerText" value="Product Actions" /> </rich:column> </rich:columnGroup> </f:facet> <rich:subTable rowClasses="odd_applicant_row, even_applicant_row" value="#{pageAppList}" var="app"> <rich:column styleClass=" internal_cell composite2TextContainingColumn" valign="top"> <h:outputText value="#{app.name}" /> </rich:column> <rich:column styleClass="internal_cell composite2TextContainingColumn" valign="top"> <h:outputText value="#{app.receiptEmail}" /> </rich:column> <rich:column valign="top" styleClass="buttonsColumn"> <h:commandButton action="#{applicantProductListBean.showUpdateApplicant(app)}" image="/images/icons/edit.jpg"> </h:commandButton>  <h:commandButton action="#{applicantProductListBean.showDeleteApplicant(app)}" image="/images/icons/delete.png"> </h:commandButton>  </rich:column> <rich:column colspan="3"> <table class="productsTableTable"> <tbody> <tr> <td class="createProductButtonTableCell"><h:commandButton action="#{applicantProductListBean.showCreateProduct(app)}" value="Create Product"> </h:commandButton>  </td> </tr> <tr> <td><rich:dataTable value="#{app.products}" var="prod" rowClasses="odd_product_row, even_product_row"> <rich:column styleClass="internal_cell composite2TextContainingColumn"> <h:outputText value="#{prod.inventedName}" /> </rich:column> <rich:column styleClass="internal_cell composite2TextContainingColumn"> <h:outputText value="#{prod.receiptEmail}" /> </rich:column> <rich:column styleClass="buttonsColumn"> <h:commandButton action="#{applicantProductListBean.showUpdateProduct(prod)}" image="/images/icons/edit.jpg"> </h:commandButton>  <h:commandButton action="#{applicantProductListBean.showDeleteProduct(prod)}" image="/images/icons/delete.png"> <f:setPropertyActionListener target="#{productBean.product}" value="#{prod}" /> </h:commandButton>  </rich:column> </rich:dataTable></td> </tr> </tbody> </table> </rich:column> </rich:subTable> <f:facet name="footer"> <h:panelGrid columns="1" styleClass="applicantProductListFooter"> <h:outputText value="#{msgs.no_results}" rendered="#{(empty applicantProductListBean.dataModel) || (applicantProductListBean.dataModel.rowCount==0)}"/> <rich:datascroller align="center" for="compositeTable" page="#{pageScrollerBean.applicantProductListPage}" id="compositeScroller" reRender="compositeTable" renderIfSinglePage="false" fastControls="hide"> <f:facet name="first"> <h:outputText value="#{msgs.first}" styleClass="scrollerCell" /> </f:facet> <f:facet name="first_disabled"> <h:outputText value="#{msgs.first}" styleClass="scrollerCell" /> </f:facet> <f:facet name="last"> <h:outputText value="#{msgs.last}" styleClass="scrollerCell" /> </f:facet> <f:facet name="last_disabled"> <h:outputText value="#{msgs.last}" styleClass="scrollerCell" /> </f:facet> <f:facet name="next"> <h:outputText value="#{msgs.next}" styleClass="scrollerCell" /> </f:facet> <f:facet name="next_disabled"> <h:outputText value="#{msgs.next}" styleClass="scrollerCell" /> </f:facet> <f:facet name="previous"> <h:outputText value="#{msgs.previous}" styleClass="scrollerCell" /> </f:facet> <f:facet name="previous_disabled"> <h:outputText value="#{msgs.previous}" styleClass="scrollerCell" /> </f:facet> </rich:datascroller> </h:panelGrid> </f:facet> </rich:dataTable> </h:form> </ui:define> This is the backing bean: @Name("applicantProductListBean") @Scope(ScopeType.PAGE) public class ApplicantProductListBean extends BasePagedSortableFilterableListBean { /** * Public field for ad-hoc injection to work. */ @EJB(name = "FacadeService") public ApplicantFacadeService applicantFacadeService; @Logger private static Log logger; private final int pageSize = 10; @Out(scope = ScopeType.CONVERSATION, required = false) Applicant currentApplicant; @Out(scope = ScopeType.CONVERSATION, required = false) Product product; @Create public void onCreate() { System.out.println("Create"); } @Override protected DataModel initDataModel(int pageSize) { // get filtering and sorting from session sorting = getSorting(); filtering = getFiltering(); // System.out.println("Initializing a Composite3DataModel"); // System.out.println("Pagesize: " + pageSize); // System.out.println("Filtering: " + filtering.getFilteringValues()); // System.out.println("Sorting: " + sorting.getSortingValues()); return new Composite3DataModel(1, sorting, filtering); } // Navigation methods /** * Navigation-returning method, returns the action to follow after pressing * the "Create Applicant" button * * @return the action to be taken */ public Navigation.ApplicantProductList showCreateApplicant() { return Navigation.ApplicantProductList.SHOW_CREATE_APPLICANT; } /** * Navigation-returning method, returns the action to follow after pressing * the "Edit Applicant" button * * @return the action to be taken */ public Navigation.ApplicantProductList showUpdateApplicant( Applicant applicant) { this.currentApplicant = applicant; return Navigation.ApplicantProductList.SHOW_UPDATE_APPLICANT; } /** * Navigation-returning method, returns the action to follow after pressing * the "Delete Applicant" button * * @return the action to be taken */ public Navigation.ApplicantProductList showDeleteApplicant( Applicant applicant) { this.currentApplicant = applicant; return Navigation.ApplicantProductList.SHOW_DELETE_APPLICANT; } /** * Navigation-returning method, returns the action to follow after pressing * the "Create Product" button * * @return the action to be taken */ public Navigation.ApplicantProductList showCreateProduct(Applicant app) { this.product = new Product(); this.product.setApplicant(app); return Navigation.ApplicantProductList.SHOW_CREATE_PRODUCT; } /** * Navigation-returning method, returns the action to follow after pressing * the "Edit Product" button * * @return the action to be taken */ public Navigation.ApplicantProductList showUpdateProduct(Product prod) { this.product = prod; return Navigation.ApplicantProductList.SHOW_UPDATE_PRODUCT; } /** * Navigation-returning method, returns the action to follow after pressing * the "Delete Product" button * * @return the action to be taken */ public Navigation.ApplicantProductList showDeleteProduct(Product prod) { this.product = prod; return Navigation.ApplicantProductList.SHOW_DELETE_PRODUCT; } /** * */ @Override public Sorting getSorting() { if (sorting == null) { return (getSortingFilteringBeanFromSession() .getApplicantProductListSorting()); } return sorting; } /** * */ @Override public void setSorting(Sorting sorting) { getSortingFilteringBeanFromSession().setApplicantProductListSorting( sorting); } /** * */ @Override public Filtering getFiltering() { if (filtering == null) { return (getSortingFilteringBeanFromSession() .getApplicantProductListFiltering()); } return filtering; } /** * */ @Override public void setFiltering(Filtering filtering) { getSortingFilteringBeanFromSession().setApplicantProductListFiltering( filtering); } /** * @return the currentApplicant */ public Applicant getCurrentApplicant() { return currentApplicant; } /** * @param currentApplicant * the currentApplicant to set */ public void setCurrentApplicant(Applicant applicant) { this.currentApplicant = applicant; } /** * The model for this page * */ private class Composite3DataModel extends PagedSortableFilterableDataModel<List<Applicant>> { public Composite3DataModel(int pageSize, Sorting sorting, Filtering filtering) { super(pageSize, sorting, filtering); } @Override protected DataPage<List<Applicant>> fetchPage(int fakeStartRow, int fakePageSize) { // if (logger.isTraceEnabled()) { System.out.println("Getting page with fakeStartRow: " + fakeStartRow + " and fakePageSize " + fakePageSize); // } // to find the page size multiply the startRow and the fakePageSize // (which is 1) to the actual page size int startRow = fakeStartRow * ApplicantProductListBean.this.pageSize; int pageSize = fakePageSize * ApplicantProductListBean.this.pageSize; // if (logger.isTraceEnabled()) { System.out.println("Getting page with startRow: " + startRow + " and pageSize " + pageSize); // } List<Applicant> pageApplicants = applicantFacadeService .findPagedWithCriteria(startRow, pageSize, filtering, sorting); // List<Applicant> pageApplicants = applicantFacadeService // .findPagedWithDynamicQuery(startRow, pageSize, filtering, // sorting, true); // if (logger.isTraceEnabled()) { System.out.println("Set of applicants: " + pageApplicants.size()); // } List<List<Applicant>> pageApplicantsListContainer = new ArrayList<List<Applicant>>(); pageApplicantsListContainer.add(pageApplicants); DataPage<List<Applicant>> dataPage = new DataPage<List<Applicant>>( this.getRowCount(), fakeStartRow, pageApplicantsListContainer); return dataPage; } @Override protected int getDatasetSize() { // int size = getServiceFacade().countWithCriteria(filtering, // sorting); // int size = // applicantFacadeService.countWithDynamicQuery(filtering, sorting, // false); int size = (int) Math.ceil((double) applicantFacadeService .countWithCriteria(filtering, sorting, false) / pageSize); if (logger.isTraceEnabled()) { logger.trace("Got Dataset Size: " + size); } return size; } } /** * @return the product */ public Product getProduct() { return product; } /** * @param product * the product to set */ public void setProduct(Product product) { this.product = product; } }

Search Results

Search found 55168 results on 2207 pages for 'http header'.

Page 557/2207 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564 | Next Page >

- by natediggs

- by Janice J. Heiss

- by MasterRoot24

- by Rubytastic

- by Bobby Diaz

- by Breck Carter

- by Ben Adderson

- by marc dauncey

- by MoneyMark

- by googletorp

- by Pinal Dave

- by Bruno.Borges

- by Shaun

- by albertpascual

- by Mark Rackley

- by holtavolt

- by Breck Carter

- by ifischer

- by pinaldave

- by BuckWoody

- by BuckWoody

- by james.ingham

- by Markos Fragkakis

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564 | Next Page >