Search Results

Search found 95301 results on 3813 pages for 'server client'.

Page 557/3813 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

• Websocket & HTTP proxy with server between two firewalls

  - by Dan

  I have a server ("A") running behind a firewall, which serves HTTP and websockets. I have no control over the firewall, but do have an external server ("B") to which the internal server can connect (note that the reverse connection from B to A is not possible due to the firewall). How can I set up some sort of proxy on B such that an Internet client ("C") can access the resources on A? I'd prefer something lightweight—even a Python program or an SSH tunnel (which I've tried without success)—rather than something more heavyweight but robust.

  Read the article

• Advice on new hardware firewall for a small company server-environment

  - by Mestika

  Hi everyone, My companies currently hardware firewall (an old ZyXEL ZyWALL firewall) and is indeed requiring an update to a new firewall. It is a small company with a similar small server-environment, so the need for a huge, complex and expensive solution isn’t there but a more “straight-forward” firewall, that can provide the necessary security to our systems and block unwanted elements from the core server and only accept access through our one server which is used as an “gateway” between the Internet and our internal network. I haven’t that much experience with hardware firewalls so I’m requesting any good advice and/or knowledge on which products will be suited for our specific need. If you need more information about the specific needs we require, please let me know and I’ll provide them to you. Sincerely - Mestika

  Read the article

• Unable to ping remote server Nagios

  - by williamsowen

  We've recently set up Nagios on one of our Amazon EC2 instances to act as a monitoring server to our other instances. nrpe was installed on our staging server stager and appears to be working fine: monitoring_server~: /usr/lib/nagios/plugins/check_nrpe -H xx.xx.xx.xx -p 5666 NRPE v2.12 The issue is - when viewing the remote server stager within the Nagios admin screen - it appears to be 'DOWN'. The check_ping command reveals: monitoring_server~: /usr/lib/nagios/plugins/check_ping -H 'xx.xx.xx.xx' -w 5000,100% -c 5000,100% -p 1 PING CRITICAL - Packet loss = 100%|rta=5000.000000ms;5000.000000;5000.000000;0.000000 pl=100%;100;100;0 Can anyone provide some direction on how to get this working? Not sure what else to do

  Read the article

• creating cookbooks and roles with out chef-server

  - by Josh Nankin

  I want to run: knife role create blah I use chef-solo and don't need knife to connect to a server. I just would like to run these commands for helping me prepopulate the files quickly. Everytime I run of these commands it attempts to connect to a server. This does not happen for knife cookbook create blah Double-ewe tee eff. Update: I've noticed this is the case for databags and environments as well. I've read elsewhere that knife is primarily intended for use with the chef-server API, but it seems ridiculous that something like this can't be done. It just needs to save the darn file.

  Read the article

• Windows VPN for remote site connection drawbacks

  - by Damo

  I'm looking for some thoughts on a particular way of setting up a estate of machines. We have a requirement to install machines into unmanned, remote locations. These machines will auto login and perform tasks controlled from a central server. In order to manage patching, AV, updates etc I want these machines to be joined to a dedicated domain for this estate. Some of the locations will only have 3G connectivity (via other hardware), others will be located on customer premises in internal networks. The central server (of ours) and the Domain Controller will be on a public WAN. I see two ways of facilitating this. Install a router at each location and have a site to site VPN between the remove device and the data centre where the servers are location Have the remote machine dial up and authenticate via a Windows VPN connection to the DC via RAS Option one is more costly to setup and has a higher operational cost. It also offers better diagnostics if the remote PC goes down. Option two works well but is solely dependent on the VPN connection been made before any communication can be made to the remote machine. In a simple test, I can got a Windows 7 machine to dial a VPN prior to authentication to a domain, then automatically login to the machine using domain credentials. If the VPN connection drops, it redials. I can also create a timed task to auto connect every hour in case of other issues. I'd like to know, why (if at all) is operating a remote network of devices which are located in various out of band locations in this way a bad idea? Consider 300-400 remote machines all at different sites. I'd rather have 400 VPN connections to a 2008 server than 400 routers, however I'd like to know other opinions on this.

  Read the article

• Appropriate Network switch for small server cluster

  - by Chris Dutrow

  Need to build a small business server cluster for the purpose of crunching data. It will not host a web site that needs to be available 24/7. It does need to support servers that host Redis, a Cassandra database cluster, and a Python web server. Operating system will most likely be Centos 6.4 Other servers in the cluster should be able to communicate very fast with each other, especially the Redis server. This will probably require the use of internal IP addresses. We will need to use multi-data center replication to synchronize the Cassandra cluster with the one that we currently have hosted on the cloud Was looking into network switches and we are unsure of the appropriate specifications that we should be looking for. Does the switch need to be "managed" or can it be "unmanged"? Does the switch need to support IPv6 or just IPv4? Do we need an enterprise level Cisco switch, or can we go with something like a $200 DLink managed (or unmanaged) small business switch? Thanks so much!

  Read the article

• CentOS send mail with external SMTP server and without local daemons

  - by Vilx-

  I've got a little old server with CentOS 6.5 on it. The hardware is old and crappy, but enough for what it has to do. Which consists of SSH (+SFTP), Apache, PHP and MySQL. Still, I'm trying to cut away all that I can. One thing that it does not need to do is to be an SMTP server. There are no mailboxes on it and nobody will ever route mail through it. However I do want it to send me an email when something goes wrong. Also, the webpages will send emails from PHP. So that brings me to the question - can I set up the mail system in such a way that there isn't an expensive mailer daemon sitting in the background with queues and whatnotelse, but rather every email is directly and immediately delivered to an external SMTP server? And how do I go about it?

  Read the article

• Generating my own SQL Server SSL Certificate

  - by Haoest

  I hear it's possible to make myself a test certificate with MakeCert from Windows SDK, but the beast is 1.5 GB, which I feel reluctant to download for a half-megabyte program. I do, however, have IIS Resource kit with me, which has selfssl to generate certificate for IIS. Will that work for SQL Server? Is there a more convenient way of generating myself an SSL certificate for SQL Server use? I even tried using CREATE CERTIFICATE with TSQL within SQL Server and then have it BACKUP into a file, but with no success. I must have confused the concept of certificate fundamentally. Any advice?

  Read the article

• MySQL ADO.NET Connector & MSSQL Integration Services

  - by user1114330

  Here I am, day three... attempting to sync a data view on a Windows Vista box (64 bit) running MSSQL 2012 and Visual Studio 2010. Sanity is slipping and hunger for progress fills my attention. I went through hell trying to get the MySQL ODBC drivers to get the job but to no avail...everyone seems to be lost and all the threads I can find are solutions that do not work for me. The problem: System DSN's not being seen by SSIS. SSIS DSN Not Showing as ODBC Data Source I make the decision to try out the ADO.NET connector...and to my surprise it is actually in the selection list in data sources in SSIS. So I take off running to create a Data Flow Task, create an ADO.NET Source (a local MSSQL DB)...all is good as usual. Then I move swiftly to creating a ADO.NET Destination, enter my credentials...wow, I am selecting a database finally on my linux server! Happy thinking that I finally have figured a way to get the job done. Then I move to mappings...nope, something is wrong...I am getting an error that hurts my eyes: Pipeline component has returned HRESULT error code 0xC0208457 from a a method call. Error at Data Flow Task [ADO NET Destination [81]]: Failed to get properties of external columns. The table name you entered may not exist or you do not have SELECT permission on the table object and an alternative attempt to get column properties through connection has failed. Detailed error messages are" You have an error in your SQL syntax check the manual that corresponds to your MySQL server version for the right syntax to use near "database".tablename" at line 1. The descriptor files on path C:\Program Files (x86)\Microsoft SQL Server\110\DTS\ProviderDescriptors\ does not contain schema information for connection of type MySQL.Data.MySqlClient.MySqlConnection. So it looks like it can't the information and therefore I cannot map the tables properly. Any ideas on this would be ultra helpful...thanks in advance to All!

  Read the article

• Catastrophic Failure opening ODBC via Citrix

  - by Joshdan

  We recently had our Citrix server crash unexpectedly. When it came back up, there was a new issue -- every ODBC connection fails with "Catastrophic Failure" (0x8000FFFF). The issue is limited to Citrix / ICA connections; logging in as the same user via RDP works as usual. The following code is my minimal test case (for wscript): ''// test_odbc.vbs strConn = "Driver={Microsoft Text Driver (*.txt; *.csv)};Dbq=c:\files\;" Set rs = CreateObject("ADODB.recordset") strSQL = "SELECT * FROM myFile.csv" wscript.echo "Press OK to Test" ''// This line breaks over Citrix, but not over Terminal Services ''// ---------------------- rs.open strSQL, strConn, 3,3 ''// ---------------------- wscript.echo rs("a") Any insight would be greatly appreciated. Windows Server 2003 SP1, Citrix MetaFrame Presentation Server 4.0. Clients include at least versions 10.2-11 running on 2000-Vista, OS X. ODBC error happens whether a DSN is used or not, on at least Access, MS-SQL, and CSV. Connections both through the SSL Gateway and directly. There have been a few users actually able to log in without trouble, but I can't pin down anything special about them.

  Read the article

• Installing and running two postgresql versions on different ports (or two instances of same server)

  - by Andrius

  I have postgresql 9.1 installed on my machine (Ubuntu). I need another postgresql server that would run next to the old one. Exact version does not matter, but I'm thinking of using 9.2 version. How could I properly install and run another postgresql version without screwing old one (like upgrading). So those versions would run independently on different ports. Old one on 5432 and new one on 5433 for example. The reason I need this is for two OpenERP versions databases. If I run two OpenERP servers (with different versions) on single postgresql port, it crashes because new OpenERP version detects old versions database and tries to run it, but it crashes because it uses another schemes. P.S or maybe I could just run same postgresql server on two ports? Update So far I tried this: /usr/lib/postgresql/9.1/bin/pg_ctl initdb -D main2 It created new cluster. I changed port to 5433 in new clusters directory postgresql.conf file. Then ran this: /usr/lib/postgresql/9.1/bin/pg_ctl -D main2 -l logfile start I got response server starting. But when I tried to enter new cluster's template database with: psql template1 -p 5433 I got this error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5433"? Also now when I try to stop server with: /usr/lib/postgresql/9.1/bin/pg_ctl -D main2 -l logfile start I get this error: pg_ctl: PID file "main2/postmaster.pid" does not exist Is server running? So I don't understand if server is running and what I'm missing here? Update Found what was wrong. Stupid me. I didn't notice that when I changed port in .conf file, that line was commented already. So actually I didn't change anything first time, but thought I did and it used default 5432 port.

  Read the article

• After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB

  - by Tom Crane

  (I have also posted this on technet but I'm running out of ideas) I've upgraded from Windows Server 2008 R2 Standard to Enterprise in order to make use of more RAM. The server previously had 32GB of RAM. The upgrade from Standard to Enterprise, using DISM, seemed to go OK, so I powered down and installed the RAM. This a Dell Poweredge T710, I was taking it from 32GB to 72GB. The BIOS recognised the RAM, although I needed to change from "Advanced ECC" to "Optimizer" mode for it to use all of it. After rebooting, windows can see the RAM but in the system panel will display: Installed memory (RAM): 72.0 GB (4.00 GB usable) In the resource monitor, the remainder of the RAM is showing as reserved for hardware. I've tried various RAM configurations, including reverting it to the same chips and same configuration as before the upgrade, but always just 4.00 GB is showing up as usable. Following some threads on these forums I've gone into msconfig and set the maximum memory "by hand" but that doesn't fix the problem. BIOS doesn't seem to have anything that looks like memory remapping which is another suggestion that has come up. How do I make this RAM available to Windows? It was available before the upgrade, because I could use the full 32GB RAM the server had to start with. A screenshot (this is after reverting to the original RAM configuration) http://screencast.com/t/5FuzevdNb I don't know if it's related, but my remote desktop configuration has also disappeared: screencast.com/t/mYedomeQWS (the bottom half of this dialog should allow me to configure Remote Desktop, it was working before the upgrade but now it isn't).

  Read the article

• Troubleshooting mailserver (Postfix, Dovecot) on Ubuntu Server 9.10?

  - by Christoffer

  I have configured a mail server with Postfix and Dovecot on Ubuntu Server 9.10. I followed the guidelines here (using Maildir): https://help.ubuntu.com/community/Postfix https://help.ubuntu.com/community/Dovecot The tests seemed alright so I connected it to GMail which is able to connect and fetch e-mails. But since there's no e-mail in the Maildir/ directory I can't decide if the problem is Postfix or Dovecot. And I am totally new to mailservers so I don't know where to start troubleshooting. So, I want to start by testing Dovecot. How can I create a fake "Hello World"-email directly on the server (using a text editor) so that I can try to fetch it with GMail? If Dovecot is alright, where do I start looking for errors in Postfix? Thank you for your time. Christoffer

  Read the article

• /data/tmp on database server?

  - by Mellon

  I am on a Linux ubuntu machine with MySQL installed. My teacher gave out an assignment which mentioned "copy cars.dat to /data/tmp on the MySQL database server" without any explanations, I do not know what is the "/data/tmp on database server" means exactly? Basically after that I need to execute SQL statement like LOAD DATA INFILE '/data/tmp/cars.dat' INTO TABLE cars So, what does copy cars.dat to /data/tmp on the database server means as there is no /data/tmp directory even? Personally, I checked /etc/mysql/my.cnf file, inside which there are definitions of : ... basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp ... Does it mean to copy cars.dat to the tmpdir which is just /tmp under root directory??

  Read the article

• PHP Mail Relay via Remote smtp Server

  - by Toqeer

  We have a php application running on Linux which sends emails to there users. Currently its setup like php.ini is configured to send via local sendmail server but we have separate mail server for our organization for this domain. I want to send the php application emails via that remote smtp server so these emails can have the correct SPF records and sign via DKIM. But I could not see such option in php.ini to specify the remote host address to forward emails to that, its for windows only. I saw some post which suggest phpMailer but I could not find how to configure that so all our php application could send via our remote SMTP.

  Read the article

• SharePoint 2010 deployment problem after added a new server to existing farm

  - by mrt

  I have SharePoint 2010 farm with one server. I'm developing some features in a sharepoint farm solution (not sandbox because there are some user rights problem). All feature scopes are set to "Site". I can deploy the solution to SharePoint with no problem. I added a new web front-end server to my existing farm. Then when I try deploy my solution, VS2010 shows this error: Error occurred in deployment step 'Activate Features': Feature with Id 'xxx' is not installed in this farm, and cannot be added to this scope I login with AD administrator account to development server. Administrator account is in site collection admins on the target web application. The farm account is in local administrators group. Is there a solution for this error?

  Read the article

• How to get uncaught PHP errors from fcgi server

  - by jason

  My web hosting company recently replaced suPHP with fcgi on my dedicated server because I needed opcode functionality. Since then I see loads of 500 errors in apache error and php error log is empty. I have no way to figure out whats the root cause. One reason I found out was time out so my hosting company changed FcgidConnectTimeout and FcgidIOTimeout to a value of 200. I believe there are no more timeout errors in my php script. My question is how do I capture PHP error before 500 internal server error page display to user? I am using Centos 5.8 server, WHM 11.34.0 (build 9), PHP 5.3.18 and Apache/2.2.23 (Unix) mod_ssl/2.2.23 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_fcgid/2.3.6

  Read the article

• Connecting to a LDAPS server

  - by Pavanred

  I am working on a development machine and I am trying to connect to my LDAP server. This is what I do - telnet ldaps- 686 then the response is - Could not open connection to the host on port 686 : connect failed But, the strange part is when I connect to my server - telnet ldap- 389 then the connection is successful. My question is, why does this happen? Do I have to install SSL certificate on the client machine where I make the call from? I do not know much about this. I know for a fact that the LDAP server is working fine because other applications are successfully using it currently.

  Read the article

• DNS is resolving fine but can't access the server (unless changing /etc/hosts)

  - by victor hugo

  Hi all, I have a VPS server with a public IP, I added some A entries in my name server like svn.example.com - 1.1.1.1 Also I added some entries in my workstation /etc/hosts file in order to work with the domains meanwhile the DNSs were refreshed. It's been around 3 days from this and I configures everything in my server (using the hosts file), the DNSs are ready and I removed the entries but for my surprise I can access the servers nor anything in my domain or sub-domains (even a ping doesn't work). I've triple checked and the DNSs are OK. I don't know too much about DNSs . Any help would be appreciated. The IP address of my VPS is 74.63.223.43 I have these domain names, all pointing to the same IP (using A entries) hartoingenio.com www.hartoingenio.com svn.hartoingenio.com

  Read the article

• Windows server 2008 R2 nas connection

  - by Msmit1993

  I am a student and i'm experimenting with my own home server running windows server 2008 R2. Now i have a NAS in my network an i can connect with it trough my server but only if i am on the administrator account. My own account is in the administrators group but can't establish a connection with the NAS unless the administrator account has already connected. How do i make my own account connect with the NAS without first connecting with the admin account. The error message on my account: An error occurred while reconnecting Y: to \NAS\Download Microsoft Windows Network: The user name could not be found. This connection has not been restored.

  Read the article

• Upload a directory recursively to an FTP server

  - by Nicolas Raoul

  I am writing a Linux shell script to copy a local directory to a remote server (removing any existing files). Local server: ftp and lftp commands are available, no ncftp or any graphical tools. Remote server: only accessible via FTP. No rsync nor SSH nor FXP. I am thinking about listing local and remote files to generate a lftp script and then run it. Is there a better way? Note: Uploading only modified files would be a plus, but not required

  Read the article

• Advice for migrating email server

  - by Chris Adams

  Hi there, I'm planning to migrate a Zimbra server with about 200gb of data from a server hosted in an office into a datacentre, to increase uptime (we've had a couple of outages when our network here started flaking out, and we have people in other countries relying on this server too). However, I'm not sure how best to migrate the data into the data centre without rendering the connection unusable during office hours, because there's far too much to send in over night over the two meg upstream connection we have here. I'm familiar with using tools like nice to stop a long running process degrading machine performance - is there a simple way to throttle a connection between office hours, so the long running transfer doesn't block the pipe, but then opens up outside of office hours to make the most of the bandwidth? I'm aware the alternative here is to simply mail a hard drive to the data centre, but I'd like to avoid doing that if I could. We're using Centos Linux for our servers, in the office and the datacentre, so extra points for an open source linux answer.

  Read the article

• poor performance when deleteing many files

  - by choppy

  I've got two machines: The first is IBM Blade with 24 cores 96GB RAM and single local hard drive with 278GB divided to 4 partitions: 1. c: - 40GB; 3GB free 2. d: - 40GB; 37GB free 3. e: - 198322GB; 198.1 free 4. 100MB (EFI system Partition) Formatted with GPT The other is pizza server with 4 cores 8GB RAM and single local hard drive with 273GB divided to 3 partitions: 1. c: - 136.81; 20GB free 2. d: - 88.74GB; 87.91 free 3. e: - 47.85GB; 46.91 free Formatted with MBR I have two scripts, the first creates 20,000 files in one directory, each file size is 192KB, the second delete the folder (recursive) and prints how much time it toke to delete all files. The problem is on the first server (blade) it takes about 2 minutes to delete all 20,000 files while on the second (pizza) it takes about 4 seconds!? Both servers have clean windows server 2008R2 with no special application running on background. Any ideas what is going on?

  Read the article

• Disabling LDAP Signing on Windows PDC in Local Policy

  - by Golmaal

  I just tripped over my own feet it seems. Playing around on a Windows 2008 R2 server (set up as domain controller), I was intrigued by certain warning event (event id 2886) which says: "To enhance the security of directory servers, you can configure both Active Directory Domain Services (AD DS) and Active Directory Lightweight Directory Services (AD LDS) to require signed Lightweight Directory Access Protocol (LDAP) binds." So I thoughtlessly did some Googling and set the relevant policies which enforce LDAP signing. Now I don't remember but I may have done that using Local Policy. Now I have setup a pfsense box which must authenticate AD users via LDAP. While the firewall can communicate over secure channel, it is difficult to manage the same for other packages such as Squid and SquidGuard. So now I have to disable i.e. undo those policy changes. The problem is that they are greyed out! The policies in question are LDAP server signing and LDAP client signing. I don't remember what I did but when I access these policies from Local Policy editor on the server, they are set to "Require Signing" and are greyed out. The same policies can still be set via Default Domain Controller option in Group Policy editor. So how can I reset these greyed out policies? Thanks

  Read the article

• Run a script on user connection on the VM host

  - by Scott Chamberlain

  I have a server running a Virtual Desktop Managed Pool, what I would like to do is when a user logs in I would like a script to check the number of available VMs and if below a threashold add additional VMs to the pool. The script to check the load and add to the pool is not the problem, I have that already figured out: $collectionName = "Test1"; $rdvh = "vmHost.example.com"; $minAvailableVMs = 2; Import-Module RemoteDesktop; $pool = Get-VirtualDesktopCollection -CollectionName $collectionName; $availableVMs = $pool.Size - ($pool.Size * $pool.PercentInUse / 100); $status = Get-VirtualDesktopCollectionJobStatus $collectionName #only add new servers if we are below the threashold and in the JOB_COMPLETEED state if($availableVMs -lt $minAvailableVMs -and $status.Status -eq [Microsoft.RemoteDesktopServices.Management.VirtualDesktopCollectionJobStatus]::JOB_COMPLETED) { Add-RDVirtualDesktopToCollection -CollectionName $collectionName -VirtualDesktopAllocation @{"$rdvh" = 1} } The problem I am having is, how do I run the above script on the Virtualization Host/Connection Broker/Some other server when a user connects?. I don't think it would be appropriate to run this as a logon script inside the VM, I think there is a way to do this on the management side but I don't know the new scripting interface in Server 2012 R2 well enough to know which commandlets I should look for to schedule this. EDIT: I know System Center is perfect for this but I do not have a license and was denied when I asked for it to be added to the budget.

  Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >