Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 558/1663 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

• Two distinct mount points with one device

  - by user1761555

  After being disappointed with Ubuntu's release update feature, I finally decided to have separate mount points for / and /home. Towards this, I reformatted my HDD giving most of my drive to sda1(meant to be /home) and allocated about 40GB to rootfs (/). Unfortunately, I would also like to have a /projects which is to be located on sda1. Currently, sda1 is being mounted as /dev/sda1 on /home type ext4 (rw) I've tried looking online for a solution to this problem..however, I'm not sure as to what to look for! Is it possible to mount the 'home' directory of sda1 as /home and 'projects' directory of sda1 as /projects?

  Read the article

• RHEL 6.5 and LDAP

  - by zuboje

  I am trying to connect our Active directory server to brand new RHEL 6.5 server. I want to authenticate users using AD credentials, but I want to restrict that only certain users can login, I don't want to allow anybody from AD to connect to it. I would like to use something like this: CN=linuxtest,OU=SecurityGroups,DC=mydomain,DC=local but I am not sure how would I setup OU and CN. I use sssd for authentication and my id_provider = ad. I wanted to use id_provider = ldap, but that did not work at all and RHEL customer service told me to setup this way. But I want to have a little bit more control who can do what. I know I can use this to restrict simple_allow_users = user1, user2, but I have 400+ users, I really don't want to go and type them all. Question is how would I setup OU or CN for my search?

  Read the article

• Tail and wildcard characters

  - by Mitch

  I want to get the last 10 lines of multiple files. I know they all end with "-access_log". So I tried: tail -10 *-access_log But this gives me an error, where as: tail -10 file-* Gives me the output I'd expect. I would think this probably has more to do with BASH then tail. However commands like: cat *-access_log Work fine. Any suggestions?

  Read the article

• Launch script after SFTP disconnect

  - by Mates

  I'm currently using Caja (basically the same as Nautilus) to connect using SSH to my server and work with files. What I'm looking for is a way to launch a simple script when I disconnect - I can launch a script after disconnecting from the TTY by putting it into ~/.bash_logout file, but that is not executed when disconnecting from a file manager. The only idea I have is to set up a cronjob which would be checking for existing sftp-server or sshd processes periodicaly and launched the script when there's no such process running. Is there any easier way to do this?

  Read the article

• Connection closed by remote host followed by Connection refused

  - by Khosrow

  All of a sudden my ssh connection to server has been damaged. Here is what's happened: $ ssh -vvv -p <PORT> -l <USER> <HOST> OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /home/khosrow/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <HOST> [<IP>] port <PORT>. debug1: Connection established. debug1: identity file /home/khosrow/.ssh/identity type -1 debug1: identity file /home/khosrow/.ssh/id_rsa type -1 debug1: identity file /home/khosrow/.ssh/id_dsa type -1 ssh_exchange_identification: Connection closed by remote host I've recently updated the box with yum update and sshd got updated as well. I honestly don't know if this caused any damages or not. But it's prompted that /etc/ssh/sshd_config was stored as /etc/ssh/sshd_config.rpmnew which was quite normal. I've seen similar posts while googling, but almost all of them suggests that I should check /etc/hosts.allow and /etc/hosts.deny, which in my case, I can't. I can not connect to the box to see what's going on there. I rebooted the box, through web interface of server provider, and it even got worse. I'm now getting this: $ ssh -vvv -p <PORT> -l <USER> <HOST> OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /home/khosrow/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <HOST> [<IP>] <PORT>. debug1: connect to address <IP> port <PORT>: Connection refused ssh: connect to host <HOST> port <PORT>: Connection refused with both <CUSTOM_PORT> and default 22 ports. I would really appreciate if anyone could help me on this.

  Read the article

• Gentoo+urxvt+terminus: How do I change font version?

  - by gaidal

  In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

  Read the article

• Can't decide on a new distro

  - by Alex W

  I've had Ubuntu (9.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook. Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working). Thanks!

  Read the article

• How to retry connections with wget?

  - by Andrei

  I have a very unstable internet connection, and sometimes have to download files as large as 200 MB. The problem is that the speed frequently drops and sits at --, -K/s and the process remains alive. I thought just to send some KILL signals to the process, but as I read in the wget manual about signals it doesn't help. How can I force wget to reinitialize itself and pick the download up where it left off after the connection drops and comes back up again? I would like to leave wget running, and when I come back, I want to see it downloading, and not waiting with speed --,-K/s.

  Read the article

• Apache on Ubuntu very slow on inital calls, very fast afterwards

  - by papakost

  I own an Ubuntu 10 VPS Server with Apache 2 hosting a Magento website. The first hit to the site from any client takes about 15-20 sec, while the subsequent hits from the same client take 0-1 sec. I suppose it doesn't have to do with Magento caching, because this happens also when the first call is on a very light page and the next calls are on heavy ones. Does anyone have an idea on what is going wrong here?

  Read the article

• How can I access another user's home?

  - by Jason94

  I'm on a network where I have the rights, but how do I do it? I've been asked to look up another user's aliases for reference.

  Read the article

• Partitioning of Ubuntu server which will use OpenVZ and encrypted partitions (unlocked through SSH l

  - by DeletedAccount

  Hi, I'm about to install a server. Some context: My HDD is 1 TB and I have 2 GB RAM Ubuntu Server Lucid Lynx AMD 64 I will use OpenVZ and have most functionality separated into containers. To support disk quotas I need to use ext3 (not ext4) for the container partition. Each time I reboot the server I want to be forced to login through SSH and mount the encrypted partitions by typing my password (if someone steals the server, no critical data should be available). I want to have as much as possible encrypted. Yet I want to be able to login through SSH as I don't have a monitor or keyboard at the server. I am not sure how big I need my partitions to be. Being able to resize them later would be nice. I guess it implies using LVM? But the manual partition mount using SSH is also very important (in fact it's more important, if I have to pick one). How do you recommend that I partition the HDD? If I have daemons which needs the encrypted partitions, will they fail and can I just restart them after mounting the needed partitions?

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• Raid1+0: create stripe over two /dev/mdx on partition or not?

  - by Chris

  Given that I haven't found a way to define how a Raid10 is created with mdadm, i went the Raid1+0 solution. How to display/define Mirror/Stripping pairs with mdadm mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /dev/sdf1 mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/sdg1 /dev/sdh1 mdadm --create /dev/md10 --level=0 --raid-devices=2 /dev/md0 /dev/md1 My question is about the stripe. For the mirror I create a primary partition over the full HD and set partition type to FD. So, should I do the same for the Stripe? Create partition on /dev/md0 and /dev/md1 (primary over full 'HDD', set partition type correctly) and then do the stripe on the partition? Is there a correct way here or are there any advantages/disadvantages to a solution? Thank you

  Read the article

• Keeping folder of files in sync over 3 machines

  - by Wizzard

  Morning, Got 3 machines that have user content on them, which I need to keep in sync. This is a 3 way sync. Currently I run rsync but we just don't handle deletes. Have looked at something like gluster, but that seems a little over the top Any other software out there to do a 3 way sync, or a good network file system...? There is for web servers so we don't want a slow / IO hungry process. 3 servers... user content could be added to 1 and needs to be moved to other two.

  Read the article

• Strange filesystem behavior, Ubuntu 9

  - by Fixee

  I have two windows open on the same machine (Ubuntu 9, ia32, server). I'll call these windows W1 and W2. W1: $ cd ~/test $ ls sample $ In W2 I run "make" from a parent directory that recreates file test/sample: $ make project . . $ cd test $ ls sample $ Now, returning to W1: $ ls $ cd ../test $ ls sample $ In other words, after I build from another window and the file test/sample is replaced, ls shows the file as missing in the 2nd window until I cd ../test back into the directory whereupon it reappears. I can give more details if required, but just wondering if this is a well-known behavior.

  Read the article

• Gnome 3 application Icons disappeared

  - by robin.koch

  I edited my main menu settings (unchecked items inside a sub menu) when it happened that the window freezed and all entries on the left side disappeared (Office, System, Settings, Games, ...). I didn't think much about it, but when I restarted my computer all application entries in my menu and my favorites (quickstart bar on the left side) where gone. When I go to activities - applications I just see the "All" entry without any items to click on. ~/.config/menu/gnome-applications.menu is an empty file and ~/.config/menu/gnome-settings.menu has the folowing content: <!DOCTYPE Menu PUBLIC '-//freedesktop//DTD Menu 1.0//EN' 'http://standards.freedesktop.org/menu-spec/menu-1.0.dtd'> <Menu> <Name>Desktop</Name> <MergeFile type="parent">/etc/xdg/menus/gnome-settings.menu</MergeFile> </Menu> I also looked into the files under /etc/xdg/menus. They look like template files without any reference to actual installed programs. I assume that due to a bug it deleted all my menu settings. Is there any way to restore at least the default menu? Or are there any other places to look for my old configuration?

  Read the article

• Rearrange content of a file

  - by VikJES

  I'd like to rearrange the content of a file on a per line basis (see below), ideally without using Perl or Python (I'm not allowed to... Don't ask.) The input file contains unordered header lines and lines with backup operation results. The output files should contain the lines ordered as shown below. Original file: Completed Backups Backups with Warnings Failed Backups Server A backup was completed with warnings Server B backup was successful Server C backup failed Server D backup was completed with warnings End result: Completed Backups Server B backup was successful Backups with Warnings Server A backup was completed with warnings Server D backup was completed with warnings Failed Backups Server C backup failed

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• merging two partitions on ubuntu

  - by gthm geeky

  This is how my partitions look like in Ubuntu. I would like to merge two partitions /dev/sda8 and /dev/sda/7 because I am unable to use both of them. /dev/sda8 111G 2.7G 103G 3% / udev 1.9G 12K 1.9G 1% /dev tmpfs 763M 864K 762M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 252K 1.9G 1% /run/shm none 100M 72K 100M 1% /run/user /dev/sda7 117G 52M 111G 1% /home Please let me know if there is any way to do it. And all the partitions looks ugly..I would like to have only one partition which would be my home folder.

  Read the article

• Disaster - partitions lost, data seemingly alive, how to recover?

  - by a2h

  I've used TestDisk and it's written my old partition structure of a ~20GiB partition for Vista, ~25GiB partition for 7 (but it now shows up as unallocated) and a ~400GiB partition for documents. What it's meant to be is a 30GiB partition for 7, some unallocated space, and a ~400GiB partition for documents. So currently, I have access to all my documents, but not any of the programs I've installed on C:, or AppData, because my boot partition is now supposedly a 20GB vista partition. I've tried using my Windows 7 install disc's repair function, but that did nothing beyond wasting about 10 minutes of my time. I'm currently posting from an Ubuntu live CD. Any help?

  Read the article

• Performance Drop Lingers after Load [closed]

  - by Charles

  Possible Duplicate: How do you do Load Testing and Capacity Planning for Databases I'm noticing a drop in performance after subsequent load tests. Although our cpu and ram numbers look fine, performance seems to degrade over time as sustained load is applied to the system. If we allow more time between the load tests, the performance gets back to about 1,000 ms, but if you apply load every 3 minutes or so, it starts to degrade to a point where it takes 12,000 ms. None of the application servers are showing lingering apache processes and the number of database connections cools down to about 3 (from a sustained 20). Is there anything else I should be looking out for here?

  Read the article

• Rescue data from damaged hard disk

  - by Lexsys

  Hello. I have a 500 GB hard drive with one NTFS-partition on it. I can mount it with Ubuntu and view the contents. But when I try to copy something, I get an I/O error. Ok, I tried to make its image with dd. I/O error as soon as it starts. I have installed ddrescue, but its manual page says not to use it with drives, failing on I/O. Can I manage to get some information from this drive and how to do this?

  Read the article

• Continue process after closing terminal?

  - by Jakobud

  Recently, I tried to unzip a 30 gig zip file on a remote system using Putty. As the long unzipping process continued, I closed Putty, assuming that the process would just continue to run on the remote machine. When I came back later and logged back into the machine again, I realized that the process must have stopped only part way through when I closed Putty. I wasn't expecting that to happen. My question is, how do I prevent this problem? Can I somehow fire off a process in the background? Or should just setup a one time cronjob that will run the process for me?

  Read the article

• Distributed filesystem across a slow link

  - by Jeff Ferland

  I have an image in my head where a link is too slow to realize the real-time transfer of files, but fast enough to catch up every day. What I'd like to see is a master <- master setup where when I write a file to Server A, the metadata will transfer to Server B immediately and the file will transfer at idle or immediately when Server B's client tries to read the file before Server A has sent it. It seems that there are many filesystems which can perform well over fast links, but I don't know of any that do well with a big bottle neck and a few hours of latency.

  Read the article

• How do I tell which kernel module is servicing a /dev device?

  - by regulatre

  How do I find out which kernel module (as seen by typing lsmod) is servicing a particular device in /dev ? In other words, say I have a device, /dev/mouse0 and I want to find out which kernel module is installed to service that device. How do I do that? Another way to look at this is, some loaded kernel modules associate themselves with a device in /dev. How does one find out which device(s) a module is "attached" to?

  Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >