Search Results

Search found 21945 results on 878 pages for 'online services'.

Page 559/878 | < Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >

• Short USB cables not charging?

  - by tropolite

  I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

  Read the article

• Windows 2008 DHCP service fails - "...failed to see a directory server for authorization."

  - by ewwhite

  I have a small environment running Windows 2008 R2 where the DHCP service on the domain controller fails every two weeks. The most-visible error is Event ID 1059 and the Event Viewer message is: "The DHCP service failed to see a directory server for authorization." The setup features two domain controller and the usual services and roles (file, print, Exchange). Restarting the service fails for a variety of reasons. I've had the following messages at different times: "Not enough storage is available to complete this operation". "Unable to determine the DHCP Server version for the Server 192.168.x.x" "The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service." A reboot of the domain controller resolves the issue for ~2 weeks. The systems are virtualized and there are no network connectivity issues. Any ideas what's happening here?

  Read the article

• DB2 users and groups

  - by Arun Srini

  Just want to know everyone's experience and take on managing users/authentication on a multi-node db2 cluster with users groups. I have 17 apps in production (project based company, only 2 online apps), and some 30 users with 7 groups. prodsel - group that has select privilege on all tables produpdt - update group on selective tables (as required by the apps) proddel - delete prodins - insert permissions for the group Now what my company does is when an app uses certain user (called app1user), and needs select and insert privilege on a table, they 1. grant select and insert for prodsel, prodins respectively 2. add the user under those two groups... now this creates one to many relationship between user and privileges, and this app1user also gets select on other tables granted for the prodsel group. I know this is wrong. Before I explain, I need to know how this is done elsewhere. Please share your experiences, even if you use other Databases that uses OS level authentication.

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

• PHP Connection Strings

  - by Campo

  I have setup mirroring on my MSSQL server it is an automatic fail over. Lets say the SQL server goes down. I have found connection strings to reconnect the site to the mirror database for MSSQL 2008 Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Provider=SQLNCLI10;Data Source=myServerAddress;Failover Partner=myMirrorServerAddress;Initial Catalog=myDataBase;Integrated Security=True; OR Driver={SQL Server Native Client 10.0};Server=myServerAddress;Failover_Partner=myMirrorServerAddress;Database=myDataBase; Trusted_Connection=yes; Is there something similar I can use for PHP to do the same sort of thing. This way if only the database goes down the site instantly fails over to the mirror database as soon as it is online. Thoughts/Suggestions/Comments All appreciated. I checked connectionstring.com but did not find a section for PHP

  Read the article

• Apache gzip with chucked encoding

  - by hoodoos

  I'm expiriencing some problem with one of my data source services. As it says in HTTP response headers it's running on Apache-Coyote/1.1. Server gives responses with Transfer-Encoding: chunked, here sample response: HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/xml;charset=utf-8 Transfer-Encoding: chunked Date: Tue, 30 Mar 2010 06:13:52 GMT And problem is when I'm requesting server to send gzipped request it often sends not full response. I recieve response, see that last chunk recived, but then after ungzipping I see that response is partial. So my question is: is it common apache issue? maybe one of it's mod_deflate plugins or something? Ask questions if you need more info. Thanks.

  Read the article

• Sql Server database logs "missing"

  - by linkerro

  Here's the problem we're having: In the applications that are using the databases we get errors like: The log for database 'redactedDatabaseName' is not available. Check the event log for related error messages. Resolve any errors and restart the database. Cannot close event log because there are still event handle users active. The server log says this: Error: 9001, Severity: 21, State: 1. Context: The server in question is holding databases for a multi-tenant application and lately it's been under quite heavy loads. It has something like 3k small databases on it and these errors have been coming in the last week. We have a work-around right now, which is taking the database offline then bringing it online again. Any ideas why this is happening and how we can fix it?

  Read the article

• Vista locks up after ~10h. of activity

  - by Naomi

  Hi everybody, I am experiencing a problem: Windows Vista completely freezes/locks up lately... It happened today twice - the mouse and keyboard stopped responding and I had to re-boot. I checked the Application Events Log and I see these two errors: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. and then The following boot-start or system-start driver(s) failed to load: SASDIFSV SASKUTIL I checked Help online and it points to http://technet.microsoft.com/en-us/library/cc756390%28WS.10%29.aspx and suggests Updating the drivers. I'm not sure why would I have problem with drivers and if so, how can I find out which drivers to update? Can you please help me? Thanks in advance.

  Read the article

• Ganglia and how it communicates

  - by MikeKulls

  I'm a little confused about how Ganglia sends information around and have found conflicting information on the web. I would have thought that the gmond process would either send info to gmetad at a regular interval or gmetad would request info from the various instances of gmond. At least one online article states this is how it works but from what I understand this is incorrect. It appears that you configure all gmond processes to send their info to a central gmond process and gmetad will request info from that central gmond. Is that correct? In my case I have 6 servers sending their information to 1 central server. If I set gmetad to get it's information from the central server then I get information from all 6 servers, all good.. Their weird thing is that if I point gmetad to one of the 6 servers then I still get info from all 6 servers. How is it that server 1 in my cluster if getting stats from all the other servers?

  Read the article

• Recover from a corrupted couchbase install

  - by jcolebrand

  We have a couchbase installation on a Windows 2008 R2 server that got corrupted (this was from before my tenure, now I want to clean it up). There is no add-remove entry in the Programs and Features list. There is no active service in services.msc. However, something still thinks Couchbase is installed. Shy of wiping the box (we aren't quite to "redeploy test environment servers at the push of a button" altho I'm working on it), how can I ensure that all remnants of couchbase installs prior are now gone? I believe the previous install was in the Couchbase 2.x range, but it may have been 1.7+ Running the installer again gives "Installer needs to update registry value in order to upgrade from the previous version. Please run installer again to continue."

  Read the article

• Open Microsoft Publisher Document on Linux

  - by Peter

  I'm pretty sure the options consist of Just don't do it (use a nice open standard file format). Not great when someone sends you something. Translate the format on Windows. I think you need Publisher, the viewer won't even print. But you can download a trial version for a once off (been there, done that). Submit the file for online translation to PDF. www.pdfonline.com/convert-pdf/ Use a Windows VM, wine, crossover office, Win4Lin, or otherwise run Publisher "under" linux. What I really want to do is convert it to something nicer natively under Linux.

  Read the article

• What is the best MTA setup for a home/laptop computer (*not* server)?

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that is not always online? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to redirect mail for local users to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• Virtualbox PXE Boot Failing with a Windows Server 2008 R2 Server

  - by Vbitz

  Some fast help on this would be good, I have been on this problem for 14 hours. In a Virtualbox test environment I have 2 virtual machines networked together using a internal network (no traffic runs though the host, it is all at a software level). One is a fresh client with 512mb of ram and a dual core set-up, the other is the server with 1.5GB of ram and running server 2008 r2. The server is configured as a dns server, dchp server, domain controller and also serves PXE booting though WDS (Windows Deployment Services). Both machines can see each other and I am able to start a network boot. The issue comes at the second to last stage of the pre windows PE install. On TFTP download of boot.sdi it starts it but stops during the boot process.

  Read the article

• How to start process as a daemon?

  - by Markus Johansson

  I have created a service which consists of a web fronted (nginx), python runner glue handler (uwsgi) and my own python code (fetcher). I have made a script (deploy.sh) to start the difference services: nginx uwsgi --ini inifie.ini python fetcher.py & disown My question is regarding how I start my python daemon. I want it to run in the background. It should not print anything to my current terminal. If I add "print" calls to my fetcher script I currently see them in the terminal window. So my question is: how do I start my fetcher.py script as a daemon?

  Read the article

• What is your best solution for task management?

  - by oo

  I have Outlook at work, Gmail at home and a BlackBerry (only syncs with work Outlook). I see that there are a number of online websites that support webbased task lists such as "remember the milk", etc. My biggest issue with Outlook is that I flag a number of emails as tasks and they show up as tasks in Outlook but NOT on my BlackBerry. I still haven't found a workaround to this. I see there is some BlackBerry sync tools but I am not sure if this will work with my corporate network. Any suggestions for getting this to work or another optimal task management solution that works at home, work and on the road?

  Read the article

• Windows 8.1 fresh install with Windows 8 licence

  - by typ1232

  I purchased Windows 8 online from Microsoft a while ago. Today Windows 8.1 was released as a free update to Windows 8 users over the Windows Store. I was planning to do a fresh install of Windows 8.1 to have a clean system again and UEFI support because I got new hardware since the Windows 8 installation. So my questions are: Where do I get the ISO installation medium for Windows 8.1 64-bit? I tried this microsoft site where I initially got my Windows 8 ISO from, but when entering my Windows 8 key in the Windows 8.1 installer, it says the key is wrong. Even if I get the ISO, will my old key work? I'm concerned because it didn't work in their installer (see previous point) Do they seriously want me to reinstall Windows 8 and after that upgrade to Windows 8.1 through their Store?!

  Read the article

• Alternatives to FTP

  - by Jack Hickerson

  I need to share files with clients outside of my business and unfortunately our FTP server is becoming too much of a hassle (with regards to clients use of an ftp client and creating password protected downloads based on customized account privileges) Essentially, I need: a remote service that mimics an FTP server with a web interface (easy for basic internet users to comprehend). over 100gb of storage file transfer size over 2gb customizable user account privileges (password protected downloads) secure storage and data transfer preferably less then $100/mo I have already looked into some services that almost meet my requirements (StreamFile.com, box.net, onehub.com, filesanywhere.com)- has anyone used a service they would recommend? cheers, jack

  Read the article

• Windows Storage Server 2008 hangs at logon

  - by ErJab

  We have a Dell PowerVault NX-3000 server running Windows Server 2008. Every now and then, when I try to login, the server seems to hang at the Welcome screen after I type in the password. However, all other services on the server are running fine - users are able to print off the print server and access their files. It just won't let me login. Any idea why this is happening? P.S.: I can't look at the server logs, because it won't let me login in the first place. Remote administration is also disabled on the server, so I can't use Remote Administration tools to look at the logs.

  Read the article

• What kind of server do I need to handle 10 million requests and mySQL queries a day?

  - by Calvin

  I'm a new bie of server administration and I'm looking for a powerful hosting service to host my new website. This website is basically a back-end of an mobile online game, and it will: handle up to 10 million of HTTPS request and mySQL queries a day store up to 2000 GB file on the hard disk transfer probably 5000 GB data in and out per month it runs on PHP and mySQL have 10 million records in mySQL database, for each record there are 5-10 fields, around 100 bytes each I really don't know what kind of a server I need to handle these requirements, my question is: what cpu/ram do I need for a dedicated server or vps? what hosting companies are able to offer this kind of dedicated server or VPS? what about cloud computing? I've researched Amazon EC2 but it seems complicated to me. And I've contacted Rackspace but strangely they said Cloudsites is not suitable for my requirements. I wonder if there is other cloud hosting company. any other alternative method? thanks very much!

  Read the article

• How do I bridge connections in windows 7?

  - by Wolfgang Haak

  At work, our ISP has gone down, 3 days running. A company next door has kindly provided us with access to their wireless network, and I'd like to get our internal mail server (win 7) to become online via that wireless connection, while being accessible from within the LAN, but I'm struggling with the windows configuration. Our company's LAN subnet (wired interface) sits on 192.168.0. Neighbour's wireless subnet 192.168.1. I've tried bridging the connections but that disconnects the mail server from the Internet connection and the LAN. what do I have to do achieve this networking configuration? Kind regards, Wolfgang

  Read the article

• Running evrouter at boot with init.d, or after xserver starts

  - by J V

  I'm using evrouter to set up mouse button binds, and init.d to start it. My init.d file: #!/bin/bash #Simple init.d script to run evrouter ### BEGIN INIT INFO # Provides: evrouter # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Set evrouter bindings # Description: Set evrouter bindings at boot time. ### END INIT INFO config="/opt/hacks/evrouterrc" case "$1" in start|restart|reload|force-reload) evrouter -c "$config" /dev/input/event* ;; stop) echo "Evrouter is not a daemon, change settings file at '$config' and restart" ;; *) echo "Usage: $0 start" >&2 exit 3 ;; esac evrouter however complains that: evrouter: could not open display "". If evrouter requires xserver to be up, how do I get init to wait until after xserver starts to run this script? If xserver restarts will this script run automatically? Running this with sudo services evrouter start still results in this error, can init.d scripts not tell where my display is? (Not exactly familiar with init, runlevels, etc)

  Read the article

• How Can I Restrict VSFTPD to a Particular Local Group?

  - by Aaron Copley

  I'd like to control VSFTPD access by adding users to a group such that only members of the defined group can access the FTP services. I am thinking I can do this by modifying /etc/pam.d/vsftpd, but am not sure how to get started. Or is this only for virtual users in VSFTPD? I am aware of user_list and this does not seem to support groups. This doesn't provide the function I am looking for which is described above. If I am mistaken though this would be great. Thanks, Aaron

  Read the article

• Where do I learn about IP blocks and subnets? Or is there just a calculator that does it all for me?

  - by cwd

  Amazon's elastic compute tool (among others) requires the ip block format for their command: ec2-authorize websrv -P tcp -p 80 -s 205.192.0.0/16 I may be doing this wrong, but as far as I can tell I need to use the block format even for a single IP address. 1) So, how would I do that for this IP? 71.75.232.132 Several years ago I took a CCNA class, and I remember going over IPs and subnets, masks, broadcast addresses, class a/b/c networks, etc. However a lot seems to have changed since then - for example I don't think you can tell what "class" a network is in just by looking at it anymore - sometimes they could be multiple classes. 2) Anyhow, my second question is where do I go to get a refresher on all these things? 3) Or should I just be using ipcalc or an online calculator to do it all for me - and if so, which one?

  Read the article

• Outlook Search Folder - Unread Mail in shared mailbox

  - by Garrett

  I have a user who is trying to configure the Unread Mail search folder for a shared mailbox in Outlook 2007. I believe last time we accomplished this by doing an advanced find, and saving the search. However, on this computer I can't search more than one folder of the shared mailbox at a time. Everything I have read online says this isn't possible, but we have one user who has it set up and working perfectly. There's no additional software or indexing, not even Windows Desktop Search 4.0 updates installed.

  Read the article

• Troubleshooting Windows Server 2012 storage spaces

  - by Iravanchi

  I'm trying the new "Storage Pools" feature on Windows Server 2012, and I've created several disks on the pool. When I restart the server, some of the disks (two, out of four) do not attach automatically, and don't show up in the list of disks. I can go to Server Manager File and Storage Services Storage Pools, and the faulty disks are listed with a yellow triangle beside them. The drive health in the properties are "unknown". But if I right-click and choose attach, the disk comes online, with all the content on it intact. But after another restart, it's the same story. I didn't find any relevant event in the event log, how can I find out why the drives are not attaching?

  Read the article

< Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >