Search Results

Search found 3033 results on 122 pages for 'manual'.

Page 56/122 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Sound stopped working

  - by Brian West

  I ran through the troubleshooting at https://help.ubuntu.com/community/SoundTroubleshooting It did not play the test sound, and it also does not play sounds during speaker-test. It does play sounds when I adjust my volume on my computer (using pommed). It worked just the other day, but this is the first time I've tested it since last night, when I put it to pm-suspend-hybrid and it half-woke up (the backlight came on, but it didn't fully wake up), then went back, then half-woke again, but was frozen like that. I had to do a manual reboot of the machine when that happened. Now my sound doesn't work, except for adjusting the volume (where the little "beep" sound plays). During the troubleshooting, it recognized my sound card, the sound modules, and the sound card's installation. I've tried removing ~/.pulse, but to no avail. Also, if it's any help, pulseaudio is running, but pulseaudio --check returns nothing, which the manpage suggests indicates an error. Edit: I should probably clarify that the wake up from the suspend-hybrid was not provoked in any way. I was laying in bed when I noticed my room was brighter suddenly, so I got up to check on it.

  Read the article

• SharePoint Content Type Cheat Sheet

  - by Bil Simser

  PrincipleAny application or solution built in SharePoint must use a custom content type over adding columns to lists. The only exception to this is one-off solutions that have no life-cycle, proof-of-concepts, etc.Creating Content TypesWeb UI. Not portable, POC onlyC# or Declarative (XML). Must deploy these as FeaturesRuleDo not chagne the base XML for a Content Type after deploying. The only exception to this rule is that you can re-deploy a modified Content Type definition only after completely removing it from the environment (either programatically or by hand).Updating Content TypesUpdate and push down to child typesWeb UI. Manual for each environment. Document steps required for repeatability.Feature Upgrade. Preferred solution.C#. If you created the content type through code you might want to go this route. Create new modified Content Types and hide the old one. Not recommended but useful for legacy.ReferencesCreate Custom Content  Types in SharePoint 2010 (C#)Content Type Definitions  (XML)Creating Content Types (XML  and C#)Updating ApproachesUpdating Child Content TypesAgree or disagree?

  Read the article

• Sales and Procurement Contracts 12.1.3++ Release Information

  - by LuciaC

  New functionality has been released for Sales and Procurement Contracts in a new patch: Contracts 12.1.3++: Patch 13877401: 12.1.3 Rollup for Oracle Contracts Core. The new functionality includes: APIs for Import of Contract Templates, Contract Expert rules, Questions and Constants: The three APIs are as follows: API for Templates, API for Rules, and API for Questions and Constants. These can be used to both create entities and update existing templates and rules. The APIs will display error and warning messages which can be processed and analyzed by the customer. Ability to Apply Multiple Templates to a Sourcing, Procurement or Sales Document: The buyer can select and add multiple templates to a quote,sales agreement document, sourcing or purchasing odcument.  All the clauses and deliverables from the new templates are synchronized with the document. The Contract Expert rules are from the original template. The buyer can also view the list of templates that are added to any sales or procurement document. Ability to Define Multi-Row Variables: You can create user defined manual variables that are tables containing one row per line or multiple rows. Contract Preview will print the variable values according to the layout defined for the variable. These variables are not available for Contract Expert Rules and Supplier. Enhancement to Suggested Sections for Clauses by Contract Expert: You can associate multiple default sections with a clause. A clause is associated with multiple values of any system variable and for each such value a section name is associated in Contracts Terms Library. When Contract Expert is run in the contract authoring flow, the clause is automatically placed in the associated section name. Plus many more new features. Read the following notes for details on all the new and changed functionality: Oracle Procurement Contracts Release Notes, Release 12.1.3++ (Doc ID 1467140.1) Oracle Sales Contracts Release Notes, Release 12.1.3++ (Doc ID 1467149.1) Oracle E-Business Suite Releases 12.1 and 12.2 Release Content Documents (Doc ID 1302189.1)

  Read the article

• Nvidia API mismatch

  - by Oli

  I had planned a day of relaxing with Portal 2 but on starting Steam (for the first time in a couple of weeks) I was greeted with the following message in the terminal: Error: API mismatch: the NVIDIA kernel module has version 270.41.19, but this NVIDIA driver component has version 270.41.06. Please make sure that the kernel module and all NVIDIA driver components have the same version. I'll confess I don't really know what it's talking about when it says driver. The verion of nvidia-current is 270.41.19. I thought that was the driver and module, all in one. I use the X-SWAT PPA and I have noted that the nvidia-settings package has boosted to 275.09.07. As this is just a settings application, I don't think this mismatch has anything to do with this. It's also not the same version as the problem being described. I'd rather not purge back to the standard Nvidia driver as it's less than stable on my GTX580. I would accept an answer that takes the manual setup and makes it recompile when the kernel recompiles (ie, some DKMS wizardry) but it has to work. I don't want to drop back to text-mode every time I restart after a kernel upgrade. Edit: Minecraft works without a single complaint about driver versions. Penumbra dies with roughly the same error when entering a game.

  Read the article

• How can I justify software testing to management?

  - by Nate

  I work for a small company (less than 200 employees) whose software group only makes up a small part of our staff (4 employees, occasionally with a few contractors). The four of us have been making strides in transitioning to better practices, and one of the next logical steps is to improve our testing. As anyone who has done any meaningful tests knows, testing takes a lot of time - and at my company, it takes too much time to justify to management, so we generally do what little we do on the sly. I don't think this is serving us well, as we keep coming up against otherwise avoidable problems when we ship under-tested software. I would like to be able to come to management with a justification for hiring a dedicated software test engineer (someone who can both write automated tests and perform manual ones). Are there any good published studies that show the benefits of adding such a position to a small company? Where can I find information about costs associated with the position? I plan on doing a little number crunching on our own history, but having some external sources to point to would help bolster my case.

  Read the article

• Finishing an iteration early

  - by f1dave

  I'd like some input on this on those working with agile methodologies... A current project is finding that development on our planned user stories is finishing some time before the end of the iteration, and that the testing effort and business acceptance is what's actually dragging us out longer towards the end. This means that the devs in question have spare time, and they're essentially going out to the iteration+1 backlog and starting work on cards there before our current iteration cards are 'done'. As iteration manager, I want to put a stop to this - I want a more team-orientated approach where the group takes ownership of getting all the cards done, as opposed to "Well, dev's done so what do I dev next?" The problem I face is convincing the team of this. On one hand, I understand why the devs don't want to test the code they've written (there are unit tests they write of course, but the manual testing to be done could be influenced by their bias). The team sees working ahead as making our next iterations easier, because a lot of the work is done before we start. I see this as screwing with the whole system of planning/actuals - but it's difficult to convince the team as to why this matters. What advice can you guys and girls give? How do we stop devs reaching ahead? What should they be doing instead? How much of a problem is this in the scheme of things, if things are still getting done?

  Read the article

• 2013 U.S. GAAP Financial Reporting Taxonomy Available for Public Review and Comment

  - by Theresa Hickman

  FASB recently released the proposed 2013 U.S. GAAP Reporting Taxonomy. Comments are due October 29, 2012 to be finalized and published early 2013.  The proposed 2013 U.S. GAAP taxonomy and instructions on how to submit comments are available at the FASB’s XBRL page. In previous blog entries, I talked about how Oracle Hyperion Disclosure Management supports the latest taxonomy, enabling financial managers to easily comply with the latest filing requirements. The taxonomy is a list of computer-readable tags in XBRL that allows companies to annotate the voluminous financial data that is included in typical long-form financial statements and related footnote disclosures. The tags allow computers to automatically search for, assemble, and process data so it can be readily accessed and analyzed by investors, analysts, journalists, and regulators. You do not have to have Oracle Hyperion Financial Management, used for consolidating financial results, to generate XBRL. You just need Oracle Hyperion Disclosure Management to generate XBRL instance documents from financial applications, such as Oracle E-Business Suite, Oracle PeopleSoft, Oracle JD Edwards EnterpriseOne, and Oracle Fusion General Ledger. To generate XBRL tags and complete SEC filings using your existing financial applications with Oracle Hyperion Disclosure Management, here are the steps: Download the XBRL taxonomy from the SEC or XBRL Website into Hyperion Disclosure Management to create a company taxonomy. Publish financial statements from the general ledger to Microsoft Excel or Microsoft Word. Create the SEC filing in the Microsoft programs and perform the XBRL tag mapping in Oracle Hyperion Disclosure Management. Ensure that the SEC filing meets XBRL and SEC EDGAR Filer Manual validation requirements. Validate and submit the company taxonomy and XBRL instance document to the SEC. Get more details about Oracle Hyperion Disclosure Management.

  Read the article

• Netcat I/O enhancements

  - by user13277689

  When Netcat integrated into OpenSolaris it was already clear that there will be couple of enhancements needed. The biggest set of the changes made after Solaris 11 Express was released brings various I/O enhancements to netcat shipped with Solaris 11. Also, since Solaris 11, the netcat package is installed by default in all distribution forms (live CD, text install, ...). Now, let's take a look at the new functionality: /usr/bin/netcat alternative program name (symlink) -b bufsize I/O buffer size -E use exclusive bind for the listening socket -e program program to execute -F no network close upon EOF on stdin -i timeout extension of timeout specification -L timeout linger on close timeout -l -p port addr previously not allowed usage -m byte_count Quit after receiving byte_count bytes -N file pattern for UDP scanning -I bufsize size of input socket buffer -O bufsize size of output socket buffer -R redir_spec port redirection addr/port[/{tcp,udp}] syntax of redir_spec -Z bypass zone boundaries -q timeout timeout after EOF on stdin Obviously, the Swiss army knife of networking tools just got a bit thicker. While by themselves the options are pretty self explanatory, their combination together with other options, context of use or boundary values of option arguments make it possible to construct small but powerful tools. For example: the port redirector allows to convert TCP stream to UDP datagrams. the buffer size specification makes it possible to send one byte TCP segments or to produce IP fragments easily. the socket linger option can be used to produce TCP RST segments by setting the timeout to 0 execute option makes it possible to simulate TCP/UDP servers or clients with shell/python/Perl/whatever script etc. If you find some other helpful ways use please share via comments. Manual page nc(1) contains more details, along with examples on how to use some of these new options.

  Read the article

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• How to let maas' cloud-init client select internal mirror?

  - by Michael

  Our maas lan can't access internet and have a internal apt-mirror site 192.168.3.6. I changed mirror set of maas server's snippets/maas_proxy file like: d-i mirror/country string manual d-i mirror/http/hostname string 192.168.3.6 d-i mirror/http/directory string /ubuntu d-i mirror/http/proxy string I deployed two maas node ok. Dashboard show the two node's state are ready. But node's cloud-init client changed the apt's sources.list like this: ## Note, this file is written by cloud-init on first boot of an instance ## modifications made here will not survive a re-bundle. ## if you wish to make changes you can: ## a.) add 'apt_preserve_sources_list: true' to /etc/cloud/cloud.cfg ## or do the same in user-data ... deb http://archive.ubuntu.com/ubuntu precise main deb-src http://archive.ubuntu.com/ubuntu precise main ... Directly use cobbler install node(without maas), the node apt's sources.list like: ... deb http://192.168.3.6/ubuntu precise main deb-src http://192.168.3.6/ubuntu precise main ... My question is: How to set user-data in maas? So that I can set cloud-init's mirror's url to 192.168.3.6 or prevent cloud-init to change mirror's url. Maas node's file /home/ubuntu/.ssh/authorized_keys is empty. Is it caused by the mirror's setup?

  Read the article

• Client-side code and UPK

  - by [email protected]

  There is a long running discussion in UPK Development regarding the use of any client side code as part of the end-user playback. By this I mean anything which requires an install including ActiveX controls, browser helper objects, stand-alone applications, things that run in the task bar, etc. We all have grown to love zero-footprint applications over the past ten years, but there are some things which are not technically feasible using HTML alone. One example of this is the functionality provided by our SmartHelp in-application support component. This allows the user to launch context sensitive help without making modifications to the target application. (If you are unfamiliar with SmartHelp, more information can be found in the "In-Application Support Guide" in the UPK manual directory) We always try to implement everything we can using only HTML but there are many features which have been requested over the years that would require some client-side code in order to work. When these come up for discussion, there is always a spirited debate about the acceptability of a client side solution. I thought it would be interesting to ask for feedback from a wider audience. What do you think about client-side components? Would your organization consider them? Do you already deploy SmartHelp? Is there a large hurdle to clear for these to be worth the deployment costs? Let us know. Mark Overton, VP Development for UPK

  Read the article

• Ubuntu 12.04 VPN default route issue when using the UI

  - by Pieter Pabst

  When setting up a VPN connection using the UI (System settings = Network) the VPN connection is used as the default route after connecting to it. How can I avoid this? That is without assigning manual addresses. I want the connection to use DHCP. It should use the eth* interfaces for my default route, like they are used before making the connection. The VPN route should only be used when connecting to addresses in the ppp0 adapters range. If possible using the UI only, not that I'm not used to editing config files... But the point of using Ubuntu for me was the "it just works" concept (which is true for 99% of the time, keep up the good work). I tried setting the "Method" combobox in the "Configure..." dialogue to "Automatic (VPN) addresses only". That doesn't make a difference. (Another thing I noticed; the UI shows my connection as a "Wireless connection" in the list control on the left. Don't know why... it has the right icon, but that's probably something for the bug tracker)

  Read the article

• Announcing Oracle Environmental Accounting and Reporting

  - by Theresa Hickman

  Oracle just launched a new product called Oracle Environmental Accounting and Reporting designed to help company’s track and report their greenhouse emissions at the operational level.  Companies around the world are facing increasing pressure to improve their energy efficiency and reduce waste in their operations. Also, new worldwide greenhouse gas legislation is putting added pressure on companies to report the impact of their emissions and energy usage on the environment. Today, companies undergo extensive and expensive data audits to maintain a ledger of up-to-date emissions factors that compare figures on an annual basis. Existing “ad hoc” approaches utilizing manual or niche solutions have a high operational cost and weak data security and audit-ability. The ideal solution is to embed environmental usage within the mainstream business operations, such as recording energy usage at the time of invoice entry, and then report on those results. This is precisely what Oracle Environmental Accounting and Reporting is designed to do. You can now capture environmental data either electronically or manually; convert that to greenhouse gas emissions; comply with mandatory and voluntary greenhouse gas reporting schemes; and identify opportunities for CO2 emissions and cost reductions.   Oracle recently acquired the intellectual property for this solution which works with both Oracle E-Business Suite Release 12 and JD Edwards EnterpriseOne Release 9.0. For more information, visit Oracle Environmental Accounting and Reporting.

  Read the article

• Cannot mount a CIFS network share over VPN

  - by Aron Rotteveel

  I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated. EDIT: It seems the Windows firewall is making things harder on me. When I turn it off, I get a bit further, although I still get the following error message: Unable to find suitable address. The strange thing is that I have file sharing added as an exception to the firewall. Port 137-139 and port 445 are open, which should suffice, shouldn't it? EDIT Jan 20th: Still not working. When I have the firewall turned on, it times out. When I turn it off, I get the not suitable address error. Turning the firewall off is not an option, by the way.

  Read the article

• DropSpace Syncs Android Files to Dropbox

  - by ETC

  DropSpace is a free Android application that fixes the primary issue that plagues the official Dropbox app for Android–the lack of true file synchronization. Grab a copy of DropSpace and start enjoying true file syncing on the go. The official Dropbox app is limited to grabbing files from your Dropbox account or pushing files from your phone to your Dropbox account. Actual file synchronization, this manual push/pull model aside, is nowhere to be found. DropSpace fills that gap by enabling file synchronization between your SD card directories and your Dropbox directories. It’s packed with handy features including restricting file syncing to Wi-Fi connection only (great if you don’t want to chew up your very limited data plan) as well as numerous toggles for various settings like whether it should delete remote files if the local file is deleted, how often it should run the sync service, and more. Hit up the link below to grab a copy and take it for a test drive. DropSpace is free and works wherever Android does; Dropbox account required. DropSpace [via Addictive Tips] Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 Access the Options for Your Favorite Extensions Easier in Firefox Don’t Sleep Keeps Your Windows Machine Awake DropSpace Syncs Android Files to Dropbox Field of Poppies Wallpaper The History Of Operating Systems [Infographic] DriveSafe.ly Reads Your Text Messages Aloud

  Read the article

• 10.10 boots to command line login prompt

  - by greggory.hz

  I recently installed Ubuntu 10.10 on a computer that was previously running 10.04 (that worked fine). Now, each time I boot up, it starts up in a command line login prompt. I can login and it stays at the command line (as expected). I can then manually start gdm with sudo start gdm and it works fine. I can also enable compiz (using proprietary nvidia drivers) so I'm reasonably confident that it's not a driver problem (at least not in the sense that the drivers just flat out aren't working). Interestingly, if I leave it at the command prompt without logging in, after about 5 or 10 minutes, gnome starts up on its own. I'm not sure what is causing this. This is what dmesg | tail gives me after a manual start of gdm: [ 15.664166] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.18 Tue Jan 18 21:46:26 PST 2011 [ 15.991304] type=1400 audit(1297543976.953:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=990 comm="apparmor_parser" [ 16.606986] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 18.798506] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 26.740010] eth0: no IPv6 routers present [ 90.444593] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 189.252208] audit_printk_skb: 21 callbacks suppressed [ 189.252213] type=1400 audit(1297544150.218:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1876 comm="apparmor_parser" [ 189.252584] type=1400 audit(1297544150.218:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser" [ 351.159585] lo: Disabled Privacy Extensions

  Read the article

• Can inbound links through template-based layouts result in penalties?

  - by Liam Sorsby

  So obviously link building is encouraged as long as it is natural, organic and has meaningful links with content relevant to your site. Obviously with the constant release of new updates to algorithms, Google is flagging sites for unnatural links to their sites. My Question is: Can this be caused by templating systems? With WordPress for example, where you can add a link on the footer and it is repeated throughout the entire website generating thousands of links? If we don't add any links, Good Content will be re-posted and linked to, surely if your content is constantly linked to this will flag your site for "unnatural" content as it's difficult to see if someone has been paid to write an article on your content. Or does Google just simply want us to audit some of the links to show we are making an effort? As you can tell we have had a Manual action for: Unnatural links to your site—impacts links. However, this seems to impact our website as well. Edit: To clarify the question: Can you get penalised for paying for advertising on a site that uses a templated sidebar. So when they create a new blog/page ect your link is also added onto the page hence resulting in 1000's of links to one page on our site. I know that one effect maybe a 0 pagerank web page linking to your page dilutes the PR of our page. However the links are only inbound not reciprocal

  Read the article

• What is a good support knowledge base tool?

  - by Guillaume

  I have been searching for a tool to help my team organize its knowledge for resolving recurring support cases. I know this question will probably be closed, but I'll try my change anyway because I know that I can have some good answers about that. Context: our team is developing and supporting an huge applications (lots of different screens and workflow processes. We already have a good tool for managing our documentation, but we are struggling with support cases. Support action involve often quite a lot of manual steps to fix stuff and the knowledge for these actions is more 'oral transmission' than modern tools. We need an efficient way to store them in a knowledge base to be able to retrieve similar cases based on patterns (a stacktrace, an error message, a component name, a workflow step, ...) and ranked by similarity. Our wiki search is not very powerful when it come to this kind of search and the team members don't want to 'waste' time writing a report that will never be found... Do you know efficient knowledge base tool for this kind of use case ?

  Read the article

• Are there Know issues with Ubuntu 11 and socket 1155? acpi=off

  - by James

  Since building my new system I cant get Ubuntu (or any other flavor of Linux) to "run" properly. To boot the live cd I have to "F6" and turn off acpi or the screen halts at a black screen with "boot stuff" written above the blinking curser. When installed I can only boot if I enter repair mode from Grub menu then once in repair mode I choose Boot Normally and it boots to the desktop. Once on the desktop I can "click" (with the mouse) only on one thing...like firefox or "desktop appearance" and the mouse no longer "clicks" on anything else ...its like the computer freezes but the mouse still moves. I end up using the reset button to restart the computer. I was able to update when prompted to do so....but at the end of the update I could not "click" the "finish" and had to use the manual reset button. I have run Ubuntu since v 8... My system specs are: intel i7 2600k ...Graphics disabled in bios... Asus p8z68-v pro.... 16G Kingston HyperX.... 2 EVGA GTX 570 in SLI.... Mouse is a simple Logitech usb Wireless. Ubuntu installed on secondary sata drive.

  Read the article

• GetContactList stops reporting collisions on welded bodies

  - by Henrique Jung

  I have some strange problem with my game which uses Box2D as physics engine and I'm out of ideas on what I can do to solve it. My game is a class assignment where I need to build a simple game where the main character moves in a 2D environment while square blocks comes from below him. Each time a collision occurs, that block is attached to the character using a weld joint, when three blocks of the same colors are together, they annihilate themselves(an effect similar to Bejeweled). I'm using a recursive function to iterate through all the attached blocks of a given block to see if there are enough blocks for them to be deleted. I'm using GetContactList function to iterate through the list of contacts to see which blocks are adjacent to each other. The results are quite disappointing, the blocks only get annihilated in few cases. After a lot of debugging, I found the issue, but I still don't know how to solve. My issue is: after some time, GetContactList STOPS returning contacts (return NULL) to blocks that were already attached for some time. I spent some time reading the Box2D manual as well as some tutorials and still didn't find any clue of what is happening. Below there's some simplified version of the code that I wrote. for(int a = 0; a < blocksList.size(); a++) { blocksList[a].BuildConnections(); } And on BuildConnections b2ContactEdge* edge = body->GetContactList(); while(edge != NULL) { if (long_check_to_see_if_there's_a_block_nearby) { // add itself to the list to be anihilated globalList.push_back(this); //if there's, call BuildConnections again on the adjacent block adjacentBody->GetUserData()->BuildConnections; } edge = edge->next; } I know that there's another issue related to circular inclusions, but I fairly sure that this problem isn't causing the problem with the collisions. You can download my entire code from this page if you'd like http://code.google.com/p/fellz/source/list

  Read the article

• Didatic approaches to teach versioning with Git

  - by Herberth Amaral

  I have already taught versioning with Git, but I think it could be more enjoyable for the guys I teach if I use another approach to teach them. The guys I mentioned before were used to working with SVN and I tried to teach Git based on SVN. Not such a good idea. It seems that some guys/teams which use SVN need a re-education on version control when they're learning Git or another DCVCS. In another attempt, I tried to show a scenario where a development team try to work without a (D)VCS and then I showed how their lives could be easier if they used a (D)VCS. I had the impression that part of the audience left the presentation without a clue what I was talking about. I've taught other classes on other subjects without problems, so I think this is not a issue with me as a teacher, but with my method. I know Git and versioning as well I know the other subjects I've presented to the other classes. So, basically, how to teach Git/DCVCS? Start with some diffs/patches and manual versioning and then teach how it can be more productive with Git? Start with Git object model? Or try to start with some pretty commands and try to save some time? To be clear: I'm looking for approaches on how to teach DCVCS (focusing on Git) effectively, based on real experiences.

  Read the article

• APress Deal of the Day - 1/June/2012 - Introducing Visual C# 2010

  - by TATWORTH

  Today's $10 Deal of the Day from APress at http://www.apress.com/9781430231714 is Introducing Visual C# 2010."If you're new to C# programming, this book is the ideal way to get started. Respected author Adam Freeman guides you through the C# language by carefully building up your knowledge from fundamental concepts to advanced features." Adam Freeman is an excellent author. This is an excellent introduction to C# programming and a manual for those with experience. Having read through book, I am very impressed by its practical approach to C#. I cannot improve on the by-line "Get started on your C# journey with an expert by your side leading by example" Adam Freeman teaches C# by precept and example. I suspect he drives a Volvo C30 as it comes up in many of the code examples! Throughout the book there are numerous links back and forth so as to avoid over complicating the current topic. I have have no hesitation in recommending this book both to programmers starting out with C# and to the seasoned professional. It is a book that should be on every C# development team's book shelf.

  Read the article

• How to get hp printer to select correct trays on samba shared printer

  - by dgermann

  My first post here. Clean install of 12.04.1. Previously 10.04. Have been running a p2035n printer without problem. Now, no matter what paper tray I select it prints to the top "by-pass" feeder--not the lower main tray. And when I select to print to manual feed, it does not wait for me to put in paper (like it used to), but prints immediately. The printer is on a samba share and is physically plugged into a WinXP machine. Its uri is smb:///computername/p2035n. I have tried several of the offered drivers for this hp machine, and even tried generic-laser. Same result on all. Here are some other things I have tried (losing 2-3 hours of my time!): hp-check -t reports “error: User needs to be member of group 'lp' to enable print, scan & fax. ” and “warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.” needed to download HPLIP 3.12.11 followed http://hplipopensource.com/hplip-web/install/install/index.html sh hplip-3.12.11-run says that before setup logout and then on login run hp-setup hp-setup could not find the printer ran hp-check -t again, found I was not in group lp ran hp-check --fix and it fixed that problem, asks for reboot rebooted after running update manager (new kernel) and hp-check -t shows no errors this time all the tray selections end up on the bypass tray hp-setup still cannot find the printer So is there a way to make this work? Thanks! :- Doug.

  Read the article

• Dealing with institutionalized programmers.

  - by Singleton

  Some times programmers who work in a project for long time tend to get institutionalized. It is difficult to convince them with reasoning. Even if we manage to convince them they will be adamant to take suggestion on board. How do we handle the situation without developing friction in team? Institutionalized in terms of practices. I recently joined in a project where build &release process was made so complicated with unnecessary roadblocks. My suggestion was we can get rid of some of the development overheads(like filling few spreadsheets) just by integrating defect management and version controlling tools (both are IBM-Rational tools integration can be very easy and one-off effort). Also by using tools like Maven & Ant (project involves java and some COTS products) build & release can be simplified and reduce manual errors& intervention. I managed to convince and ready to put efforts for developing proof of concept. But the ‘Senior’ developer is not willing to take it on board. One reason could be the current process makes him valuable in team.

  Read the article

• Getting xsession-errors after Unity Lens install

  - by David

  I apologize in advance if I am leaving something out here. Please let me know what additional info is required, and i will be happy to post it. Can you tell me what these error messages are, and how I can go about resolving them? WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /net/launchpad/lens/utilities does not exist WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /net/launchpad/lens/utilities does not exist WARN 2012-02-02 14:02:56 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-installed.svg: Error opening file: No such file or directory WARN 2012-02-02 14:02:56 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-available.svg: Error opening file: No such file or directory WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /net/launchpad/lens/askubuntu does not exist WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /net/launchpad/lens/askubuntu does not exist I am also getting Nautilus errors logged here. I do not remember what lenses I installed, or from where (Software Center, manual install, etc).

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >