Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 560/647 | < Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >

  • Read line and change the line that not consist of certain words and not end with dot

    - by igo
    I wanna read some text files in a folder line by line. for example of 1 txt : Fast and Effective Text Mining Using Linear-time Document Clustering Bjornar Larsen WORD2 Chinatsu Aone SRA International AK, Inc. 4300 Fair Lakes Cow-l Fairfax, VA 22033 {bjornar-larsen, WORD1 I wanna remove line that does not contain of words = word, word2, word3, and does not end with dot . so. from the example, the result will be : Bjornar Larsen WORD2 Chinatsu Aone SRA International, Inc. {bjornar-larsen, WORD1 I am confused, hw to remove the line? it that possible? or can we replace them with a space? here's the code : $url = glob($savePath.'*.txt'); foreach ($url as $file => $files) { $handle = fopen($files, "r") or die ('can not open file'); $ori_content= file_get_contents($files); foreach(preg_split("/((\r?\n)|(\r\n?))/", $ori_content) as $buffer){ $pos1 = stripos($buffer, $word1); $pos2 = stripos($buffer, $word2); $pos3 = stripos($buffer, $word3); $last = $str[strlen($buffer)-1];//read the las character if (true !== $pos1 OR true !== $pos2 OR true !==$pos3 && $last != '.'){ //how to remove } } } please help me, thank you so much :)

    Read the article

  • Where my memory is alloced, Stack or Heap, Can I find it at Run-time?

    - by AKN
    I know that memory alloced using new, gets its space in heap, and so we need to delete it before program ends, to avoid memory leak. Let's look at this program... Case 1: char *MyData = new char[20]; _tcscpy(MyData,"Value"); . . . delete[] MyData; MyData = NULL; Case 2: char *MyData = new char[20]; MyData = "Value"; . . . delete[] MyData; MyData = NULL; In case 2, instead of allocating value to the heap memory, it is pointing to a string literal. Now when we do a delete it would crash, AS EXPECTED, since it is not trying to delete a heap memory. Is there a way to know where the pointer is pointing to heap or stack? By this the programmer Will not try to delete any stack memory He can investigate why does this ponter, that was pointing to a heap memory initially, is made to refer local literals? What happened to the heap memory in the middle? Is it being made to point by another pointer and delete elsewhere and all that?

    Read the article

  • What is the PIXELFORMATDESCRIPTOR parameter in SetPixelFormat() used for?

    - by Mads Elvheim
    Usually when setting up OpenGL contexts, I've simply filled out a PIXELFORMATDESCRIPTOR structure with the necessary information and called ChoosePixelFormat(), followed by a call to SetPixelFormat() with the returned matching pixelformat from ChoosePixelFormat(). Then I've simply passed the initial descriptor without giving much thought of why. But now I use wglChoosePixelFormatARB() instead if ChoosePixelFormat() because I need some extended traits like sRGB and multisampling. It takes an attribute list of integers, just like XLib/GLX on Linux, not a PIXELFORMATDESCRIPTOR structure. So, do I really have to fill in a descriptor for SetPixelFormat() to use? What does SetPixelFormat() use the descriptor for when it already has the pixelformat descriptor index? Why do I have to specify the same pixelformat attributes in two different places? And which one takes precedence; the attribute list to wglChoosePixelFormatARB(), or the PIXELFORMATDESCRIPTOR attributes passed to SetPixelFormat()? Here are the function prototypes, to make the question more clear: /* Finds a best match based on a PIXELFORMATDESCRIPTOR, and returns the pixelformat index */ int ChoosePixelFormat(HDC hdc, const PIXELFORMATDESCRIPTOR *ppfd); /* Finds a best match based on an attribute list of integers and floats, and returns a list of indices of matches, with the best matches at the head. Also supports extended pixelformat traits like sRGB color space, floating-point framebuffers and multisampling. */ BOOL wglChoosePixelFormatARB(HDC hdc, const int *piAttribIList, const FLOAT *pfAttribFList, UINT nMaxFormats, int *piFormats, UINT *nNumFormats ); /* Sets the pixelformat based on the pixelformat index */ BOOL SetPixelFormat(HDC hdc, int iPixelFormat, const PIXELFORMATDESCRIPTOR *ppfd);

    Read the article

  • jquery image hover popup cant detect browser edge and change its direction

    - by Salman
    hi guys i am trying to implement jquery image hover popup but facing a problem when the popup is closer to browser edge it goes beyond its edge i want it to change its direction when it finds that space is not enough to show that popup, i have see this effect in many plugins where popups, tooltips and drop down menus change their direction if they are close to browser window edge can any one guide me in right direction here is the screen shot for reference http://img512.imageshack.us/img512/4990/browseredge.png here is the jquery hover code function imagePreview(){ /* CONFIG */ xOffset = 10; yOffset = 30; // these 2 variable determine popup's distance from the cursor // you might want to adjust to get the right result /* END CONFIG */ $("a.preview").hover(function(e){ this.t = this.title; this.title = ""; var c = (this.t != "") ? "<br>" + this.t : ""; var newName = this.name; //console.log(this.name); newName=newName.replace("/l/","/o/"); //console.log(newName); $("body").append("<p id='preview'><img src='"+ this.name +"' alt='Image preview' style='margin-bottom:5px;'>"+ c +"</p>"); $("#preview img").error(function () { $("#preview img").attr("src" ,newName).css({'width': '400px', 'height': 'auto'}); }); $("#preview") .css("top",(e.pageY - xOffset) + "px") .css("left",(e.pageX + yOffset) + "px") .fadeIn("fast"); }, function(){ this.title = this.t; $("#preview").remove(); }); $("a.preview").mousemove(function(e){ $("#preview") .css("top",(e.pageY - xOffset) + "px") .css("left",(e.pageX + yOffset) + "px"); }); }; any help will be appriciated Thanks Salman

    Read the article

  • How to get a handle on all this middleware?

    - by jkohlhepp
    My organization has recently been wrestling the question of whether we should be incorporating different middleware products / concepts into our applications. Products we are looking at are things like Pegasystems, Oracle BPM / BPEL, BizTalk, Fair Isaac Blaze, etc., etc., etc. But I'm having a hard time getting a handle on all this. Before I go forward with evaluating the usefulness (positive or negative) of these different products I'm trying to get an understanding of all the different concepts in this space. I'm overwhelmed with an alphabet soup of BPM, ESB, SOA, CEP, WF, BRE, ERP, etc. Some products seem to cover one or more of those aspects, others focus on doing one. The terms all seem very ambiguous and conflated with each other. Is there a good resource out there to get a handle on all these different middleware concepts / patterns? A book? A website? An article that sums it up well? Bonus points if there is a resource that maps the various popular products into which pattern(s) they address. Thanks, ~ Justin

    Read the article

  • can't write to physical drive in win 7??

    - by matt
    I wrote a disk utility that allowed you to erase whole physical drives. it uses the windows file api, calling : destFile = CreateFile("\\.\PhysicalDrive1", GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, OPEN_EXISTING,createflags, NULL); and then just calling WriteFile, and making sure you write in multiples of sectors, i.e. 512 bytes. this worked fine in the past, on XP, and even on the Win7 RC, all you have to do is make sure you are running it as an administrator. but now I have retail Win7 professional, it doesn't work anymore! the drives still open fine for writing, but calling WriteFile on the successfully opened Drive now fails! does anyone know why this might be? could it have something to do with opening it with shared flags? this is always what I have done before, and its worked. could it be that something is now sharing the drive? blocking the writes? is there some way to properly "unmount" A drive, or atleast the partitions on it so that I would have exclusive access to it? some other tools that used to work don't any more either, but some do, like the WD Diagnostic's erase functionality. and after it has erased the drive, my tool then works on it too! leading me to belive there is some "unmount" process I need to be doing to the drive first, to free up permission to write to it. Any ideas?

    Read the article

  • How to display a subview loaded from a separate NIB file

    - by Marcus Netter
    I'm developing a Cocoa desktop application that uses a source list in the style of iTunes: different elements in the source list cause the main content area to display different views. The content area is entirely filled with a (vertical) NSSplitView; on the left is an NSOutlineView source list. When the user selects an item on the left, the relevant view appears on the right side of the splitter. I can make it work well enough by putting everything in one NIB file and putting a borderless NSTabView to the right of the splitter; to switch views, I just have to change the selected tab. But putting all the views in one NIB is bad practice, so I'm trying to move each of the subviews into their own NIB files. I have a pretty good idea of most of this process — I've created an NSViewController subclass for each of these views (EntityDetailViewController, GroupDetailViewController, and so on), set the File's Owner of each new NIB to the relevant controller class, set the view connection in each NIB, and reworked the bindings. What I don't know is how to actually change which subview is being shown on screen. I've tried using the default generic NSView on the right side and sending it addSubview: messages; I've tried connecting to it as the first subview and calling NSView *newSubview = /* get subview from the new subview controller */ [[subview superview] replaceSubview:subview with:newSubview]; [self setSubview:newSubview]; But everything just leaves the space blank. How do I display a subview loaded from a separate NIB?

    Read the article

  • CSS absolute DIV causing other absolute DIV problems

    - by Tim
    Hello, I have implemented a chat script which requires an absolutely positioned DIV to be wrapped around the pages content. This is to ensure the chat windows stay at the bottom. The problem is that because of the absolute positioning of this main wrapper, all other absolutely positioned elements (eg. Jquery Auto-completes, datepicker's etc) now scroll up and down with the page. Here is an example of the HTML: <body> <div id="main_container"> <div id="content">Elements like Jquery Autocompletes, Datepickers with absolute positioned elements in here</div> </div> The DIV "main_container" style looks like this: #main_container { width:100%; background-color:#ffffff; /* DO NOT REMOVE THIS; or you'll have issue w/ the scrollbar, when the mouse pointer is on a white space */ overflow-x: hidden; overflow-y: scroll; height:100%; /* this will make sure that the height will extend at the bottom */ position:absolute; /* container div must be absolute, for our fixed bar to work */ } I hope there is a simple fix as the chat script is too good to get rid of. Thanks, Tim

    Read the article

  • CKEditor instance in a jQuery dialog

    - by Gazillion
    Hey, I am using jQuery to open a dialog window with a textarea transformed into an instance of CKEditor. I'm using the jQuery adapter provided by the CKEditor team but when the dialog window opens up I cannot interact with the editor (it's created but "null" is written in the content space and I can't click on anything or modify the content). This bug report seems to say that by using a patch provided the issue is fixed but it doesn't seem to be working for me... Here's my code (maybe I did something wrong programmatically): HTML: <div id="ad_div" title="Analyse documentaire"> <textarea id="ad_content" name="ad_content"></textarea> </div> My includes (Everything is included correctly but maybe it's an including order issue?): <script type="text/javascript" src="includes/ckeditor/ckeditor.js"></script> <link rel="stylesheet" type="text/css" href="includes/jquery/css/custom-theme/jquery-ui-1.7.2.custom.css" /> <script type="text/javascript" src="includes/jquery/js/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="includes/jquery/js/jquery-ui-1.7.2.custom.min.js"></script> <script type="text/javascript" src="includes/jquery/plugins/dialog-patch.js"></script> <script type="text/javascript" src="includes/ckeditor/adapters/jquery.js"></script> Javascript: $('#ad_content').ckeditor(); /* snip */ $('#ad_div').dialog( { modal: true, resizable: false, draggable: false, position: ['center','center'], width: 600, height: 500, hide: 'slide', show: 'slide', closeOnEscape: true, autoOpen: false }); $('.analyse_cell').click(function(){ $('#ad_div').dialog('open'); });

    Read the article

  • How to make xml in C#?

    - by kacalapy
    i have not worked with XML in a while can someone post the syntax needed to build and save an xml node structure that resembles that of a tree structure that is created by a recursive function. basically i have a recursive function that saves data found an a page(url) and then follows each URL found on that page recursivley and does the same to it. to audit this i want an output as a xml file to disk so i can see how it is doing its recursion and parsing. the code i have is below. please add to it the needed xml calls needed to create a xml structure like the one i show below. (please include the full name space so i can see where the objects i need in .net are for this.) page1.htm has 2 links on it: <a href=page1_1.htm> <a href=page1_2.htm> page1_1.htm has 2 links on it <a href=page1_1_a.htm> (this then will have some links also) <a href=page1_1_b.htm> (this then will have no more links on it - dead end) the xml should do something like this: <node url=page1.htm> ...<node url=page1_1_a.htm> ...... <node url="xxx.htm"/> ...... <node url="yyy.htm".> ... </node> ...<node url=page1_1_b.htm /> </node>

    Read the article

  • RHEL 5.3 Kickstart - How specify location of individual package in Workstation folder?

    - by Ed
    I keep getting "package does not exist" errors during the install. I made a kickstart ISO to create an unattended install of a RHEL 5.3 build machine for C++ software releases. It pulls the kickstart config file from our internal web server. This is handy; it makes it easy to test and modify without having to make a new ISO. And I plan to check it in to version control if I can get it working. Anyway, the rpm packages are located in two folders on the disk; Client and Workstation. The packages install fine for the ones that are physically located under the Client folder. It cannot find those under the Workstation folder such as as doxygen and subversion complaining that packages do not exist. Is there a way to specify the individual package location? # ----------------------------------------------------------------------------- # P A C K A G E S # ----------------------------------------------------------------------------- %packages @gnome-desktop @core @base @base-x @printing @development-tools emacs kexec-tools fipscheck xorg-x11-server-Xnest xorg-x11-server-Xvfb #Packages Located in Workstation Folder *** Install can not find any of these ?? bison doxygen gcc-c++ subversion zlib-devel freetype-devel libxml2-devel Thanks in advance, -Ed

    Read the article

  • intelligent path truncation/ellipsis for display

    - by peterchen
    I am looking for an existign path truncation algorithm (similar to what the Win32 static control does with SS_PATHELLIPSIS) for a set of paths that should focus on the distinct elements. For example, if my paths are like this: Unit with X/Test 3V/ Unit with X/Test 4V/ Unit with X/Test 5V/ Unit without X/Test 3V/ Unit without X/Test 6V/ Unit without X/2nd Test 6V/ When not enough display space is available, they should be truncated to something like this: ...with X/...3V/ ...with X/...4V/ ...with X/...5V/ ...without X/...3V/ ...without X/...6V/ ...without X/2nd ...6V/ (Assuming that an ellipsis generally is shorter than three letters). This is just an example of a rather simple, ideal case (e.g. they'd all end up at different lengths now, and I wouldn't know how to create a good suggestion when a path "Thingie/Long Test/" is added to the pool). There is no given structure of the path elements, they are assigned by the user, but often items will have similar segments. It should work for proportional fonts, so the algorithm should take a measure function (and not call it to heavily) or generate a suggestion list. Data-wise, a typical use case would contain 2..4 path segments anf 20 elements per segment. I am looking for previous attempts into that direction, and if that's solvable wiht sensible amount of code or dependencies.

    Read the article

  • VB.net Saving an MetaFile / EMF as a bitmap ( .tiff)

    - by pehaada
    Currently I have a third party control that generates a Metafile. I can save the .wmf file to disk with out issue. The problem is how do I render the Metafile as a Tiff file. Currently I have the following code to get my metafile and save it. Dim mf As Metafile = page.GetImage(TXTextControl.Page.PageContent.All) Dim enhMetafileHandle As IntPtr = mf.GetHenhmetafile() Dim h As IntPtr Dim bufferSize As UInteger = GetEnhMetaFileBits(enhMetafileHandle, 0, h) Dim buffer(CInt(bufferSize)) As Byte GetEnhMetaFileBits(enhMetafileHandle, bufferSize, buffer) Dim msMetafileStream As New MemoryStream msMetafileStream.Write(buffer, 0, CInt(bufferSize)) Dim baMetafileData() As Byte baMetafileData = msMetafileStream.ToArray Dim g As Graphics = Graphics.FromImage(mf) mf.Dispose() File.WriteAllBytes("c:\a.wmf", baMetafileData) end sub _ Public Shared Function GetEnhMetaFileBits( ByVal hEMF As System.IntPtr, ByVal nSize As UInteger, ByVal lpData As IntPtr) As UInteger End Function <System.Runtime.InteropServices.DllImportAttribute("gdi32.dll", EntryPoint:="GetEnhMetaFileBits")> _ Public Shared Function GetEnhMetaFileBits(<System.Runtime.InteropServices.InAttribute()> ByVal hEMF As System.IntPtr, ByVal nSize As UInteger, ByVal lpData() As Byte) As UInteger End Function I've tried all sort of IMAGE and Graphic calls and just can't save the meta file as a .tiff. Any suggestions would be great. I even tried to create a new bitmap and draw the metafile onto it. I always end up with a GDI exception being thrown.

    Read the article

  • SQL Server - Multi-Column substring matching

    - by hamlin11
    One of my clients is hooked on multi-column substring matching. I understand that Contains and FreeText search for words (and at least in the case of Contains, word prefixes). However, based upon my understanding of this MSDN book, neither of these nor their variants are capable of searching substrings. I have used LIKE rather extensively (Select * from A where A.B Like '%substr%') Sample table A: ID | Col1 | Col2 | Col3 | ------------------------------------- 1 | oklahoma | colorado | Utah | 2 | arkansas | colorado | oklahoma | 3 | florida | michigan | florida | ------------------------------------- The following code will give us row 1 and row 2: select * from A where Col1 like '%klah%' or Col2 like '%klah%' or Col3 like '%klah%' This is rather ugly, probably slow, and I just don't like it very much. Probably because the implementations that I'm dealing with have 10+ columns that need searched. The following may be a slight improvement as code readability goes, but as far as performance, we're still in the same ball park. select * from A where (Col1 + ' ' + Col2 + ' ' + Col3) like '%klah%' I have thought about simply adding insert, update, and delete triggers that simply add the concatenated version of the above columns into a separate table that shadows this table. Sample Shadow_Table: ID | searchtext | --------------------------------- 1 | oklahoma colorado Utah | 2 | arkansas colorado oklahoma | 3 | florida michigan florida | --------------------------------- This would allow us to perform the following query to search for '%klah%' select * from Shadow_Table where searchtext like '%klah%' I really don't like having to remember that this shadow table exists and that I'm supposed to use it when I am performing multi-column substring matching, but it probably yields pretty quick reads at the expense of write and storage space. My gut feeling tells me there there is an existing solution built into SQL Server 2008. However, I don't seem to be able to find anything other than research papers on the subject. Any help would be appreciated.

    Read the article

  • QueryString malformed after URLDecode

    - by pdavis
    I'm trying to pass in a Base64 string into a C#.Net web application via the QueryString. When the string arrives the "+" (plus) sign is being replaced by a space. It appears that the automatic URLDecode process is doing this. I have no control over what is being passed via the QueryString. Is there any way to handle this server side? Example: http://localhost:3399/Base64.aspx?VLTrap=VkxUcmFwIHNldCB0byAiRkRTQT8+PE0iIHBsdXMgb3IgbWludXMgNSBwZXJjZW50Lg== Produces: VkxUcmFwIHNldCB0byAiRkRTQT8 PE0iIHBsdXMgb3IgbWludXMgNSBwZXJjZW50Lg== People have suggested URLEncoding the querystring: System.Web.HttpUtility.UrlEncode(yourString) I can't do that as I have no control over the calling routine (which is working fine with other languages). There was also the suggestion of replacing spaces with a plus sign: Request.QueryString["VLTrap"].Replace(" ", "+"); I had though of this but my concern with it, and I should have mentioned this to start, is that I don't know what other characters might be malformed in addition to the plus sign. My main goal is to intercept the QueryString before it is run through the decoder. To this end I tried looking at Request.QueryString.toString() but this contained the same malformed information. Is there any way to look at the raw QueryString before it is URLDecoded? After further testing it appears that .Net expects everything coming in from the QuerString to be URL encoded but the browser does not automatically URL encode GET requests.

    Read the article

  • Eclipse JUnit Plugin Test very slow to re-execute Test Suite on Windows

    - by soundasleepful
    I'm having an odd, and stressing, problem with running a large JUnit Plugin test suite in Eclipse. When I try to re-run a JUnit plugin suite that has just been executed, Eclipse hangs for quite some time before it eventually wakes up and launches. It can take up to 5 minutes sometimes, and increases with the size of the suite. Visually, it appears as a GC cleanup, except that I have plenty of GC space available (400 MB freely allocated). The size of the workspace that is has to delete is well under 1 GB, and there are not too many files - definitely less than 20,000. While I was waiting for a new run to start, I decided to manually kill explorer.exe to see if it had any effect. Surprisingly, Eclipse instantly fell out of its freeze and ran as normal. This makes me think that Windows is somehow interfering with the deletion of these workspace files. They're not being put into the Recycle Bin though. The workspace is in C: which I think is out of the range of any workspace/domain stuff. Any ideas?

    Read the article

  • semi dynamic cdn

    - by dwi kristianto
    i'm developing couple of websites using php (directory script, etc.) and wordpress as cms. i need to improve its performance, by using cdn for static files (css, js, images). the problem is, css and javascript files are generated on the fly. i did that due to yahoo and some expert advice to combine the files into one file. also changing basic color of css files. for the time being, i use couple of small vps but still its not fast enough. i already contact maxcdn and the support guy said that they dont have such kind of services. what i need is: a cdn that will serve the request from user/visitor and there's no file in local disk, the cdn will redirect/fetch it from another domain/server. in vps, it could be done easily using combination of .htaccess and php, but NOT in the cdn. most of cdn only support purely static files. is there any such cdn that will server semi-dynamic files?

    Read the article

  • Installing Mercurial on Mac OS X 10.6 Snow Leopard

    - by Matthew Rankin
    Installing Mercurial on Mac OS X 10.6 Snow Leopard I installed Mercurial 1.3.1 on Mac OS X 10.6 Snow Leopard from source using the following: cd ~/src curl -O http://mercurial.selenic.com/release/mercurial-1.3.1.tar.gz tar xzvf mercurial-1.3.1.tar.gz cd mercurial-1.3.1 make ALL sudo make install This installs the site-packages files for Mercurial in /usr/local/lib/python2.6/site-packages/. I know that installing Mercurial from the Mac Disk Image will install the files into /Library/Python/2.6/site-packages/, which is the site-packages directory for the Mac OS X default Python install. I have Python 2.6.2+ installed as a Framework with its site-packages directory in: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages With Mercurial installed this way, I have to issue: PYTHONPATH=/usr/local/lib/python2.6/site-packages:"${PYTHONPATH}" in order to get Mercurial to work. Questions How can I install Mercurial from source with the site-packages in a different directory? Is there an advantage or disadvantage to having the site-packages in the current location? Would it be better in one of the Python site-package directories that already exist? Do I need to be concerned about virtualenv working correctly since I have modified PYTHONPATH (or any other conflicts for that matter)? Reasons for Installing from Source Dan Benjamin of Hivelogic provides the benefits of and instructions for installing Mercurial from source in his article Installing Mercurial on Snow Leopard.

    Read the article

  • Android -Layout Manager not showing buttons

    - by Arun
    The following is my code. I want an interface where I have a single line textbox, a multiline textbox with 2 buttons below. I want the multiline textbox to occupy all the space available after rendering the buttons and textbox. For this I created two LinearLayouts inside the main layout. The first one has vertical orientation with layout_width set to fill_parent. The second one is horizontal with fill_parent again. The first one has a textbox for which I have set the layout_height to fill parent. The second one has two textboxes OK and Cancel. When I run this application I get the UI, but the Buttons are very small. I have to set the button height manually. What am I doing wrong here. I don't want to hard code the button height. <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent"> <LinearLayout android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent" android:layout_weight="1"> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="Name"></TextView> <EditText android:layout_width="fill_parent" android:layout_height="wrap_content"></EditText> <TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="Contents"></TextView> <EditText android:layout_width="fill_parent" android:layout_height="fill_parent" android:gravity="top" /> </LinearLayout> <LinearLayout android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="wrap_content" android:layout_weight="1"> <Button android:id="@+id/okbutt" android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="OK" android:layout_weight="1" /> <Button android:layout_width="fill_parent" android:layout_height="fill_parent" android:text="Cancel" android:layout_weight="1" /> </LinearLayout> Thanks, Arun

    Read the article

  • Changing customErrors in web.config semi-dynamically

    - by Tom Ritter
    The basic idea is we have a test enviroment which mimics Production so customErrors="RemoteOnly". We just built a test harness that runs against the Test enviroment and detects breaks. We would like it to be able to pull back the detailed error. But we don't want to turn customErrors="On" because then it doesn't mimic Production. I've looked around and thought a lot, and everything I've come up with isn't possible. Am I wrong about any of these points? We can't turn customErrors on at runtime because when you call configuration.Save() - it writes the web.config to disk and now it's Off for every request. We can't symlink the files into a new top level directory with it's own web.config because we're on windows and subversion on windows doesn't do symlinks. We can't use URL-Mapping to make an empty folder dir2 with its own web.config and make the files in dir1 appear to be in dir2 - the web.config doesn't apply We can't copy all the aspx files into dir2 with it's own web.config because none of the links would be consistent and it's a horrible hacky solution. We can't change customErrors in web.config based on hostname (e.g. add another dns entry to the test server) because it's not possible/supported We can't do any virtual directory shenanigans to make it work. If I'm not, is there a way to accomplish what I'm trying to do? Turn on customErrors site-wide under certain circumstances (dns name or even a querystring value)?

    Read the article

  • What am I doing wrong with HttpResponse content and headers when downloading a file?

    - by Slauma
    I want to download a PDF file from a SQL Server database which is stored in a binary column. There is a LinkButton on an aspx page. The event handler of this button looks like this: protected void LinkButtonDownload(object sender, EventArgs e) { ... byte[] aByteArray; // Read binary data from database into this ByteArray // aByteArray has the size: 55406 byte Response.ClearHeaders(); Response.ClearContent(); Response.BufferOutput = true; Response.AddHeader("Content-Disposition", "attachment; filename=" + "12345.pdf"); Response.ContentType = "application/pdf"; using (BinaryWriter aWriter = new BinaryWriter(Response.OutputStream)) { aWriter.Write(aByteArray, 0, aByteArray.Length); } } A "File Open/Save dialog" is offered in my browser. When I store this file "12345.pdf" to disk, the file has a size of 71523 Byte. The additional 16kB at the end of the PDF file are the HTML code of my page (as I can see when I view the file in an editor). I am confused because I was believing that ClearContent and ClearHeaders would ensure that the page content is not sent together with the file content. What am I doing wrong here? Thanks for help!

    Read the article

  • Query optimization (OR based)

    - by john194
    I have googled but I can't find answers for these questions. Your advice is appreciated. centOS on vps with 512MB RAM, nginx, php5 (fastcgi), mysql5 (myisam, not innodb). I need to optimize this app created by some ex-employee. This app is working, but it's slow. Table: t1(id[bigint(20)],c1[mediumtext],c2[mediumtext],c3[mediumtext],c4[mediumtext]) id is some random big number, and is PK Those mediumtext rows look like this: c1="|box-002877|" c2="|ct-2348|rd-11124854|hw-3949|wd-8872|hw-119037736|...etc.. " c3="|fg-2448|wd-11172|hw-1656|...etc.. " c4="|hg-2448|qd-16667|...etc." (some columns contain a lot of data, around 900 KiB, database around 300 MiB) Yes, mediumtext "is bad", and (20) is too big... but I didn't create this. Those codes can be found on any of those 4 mediumtext's... //he needs all the columns of the row containing $code, so he wrote this: function f1($code) { SELECT * FROM t1 WHERE c1 LIKE '%$code%' OR c2 LIKE '%$code%' OR c3 LIKE '%$code%' OR c4 LIKE '%$code%'; Questions: Q1. If $code is found on c1... mysql automatically stops checking and returns row=id+c1+c2+c3+c4? or it will continue (wasting time) checking c2, c3 and c4?... Q2. Mysql is working with this table on disk (not RAM) because of the mediumtext, right? is this the primary cause of slowness? Q3. That query can be cached by mysql (if using a big query_cache_size=128M value on the my.cnf)? or that's not cacheable due to the mediumtexts, or due to the "OR LIKE"...? Q4. Do you recommend rewriting this with mysql's INSTR() / LOCATE() / MATCH..AGAINST [FULLTEXT]?

    Read the article

  • How to display image within cell boundary

    - by Jessy
    How can I place an image within the cell boundary? I mean without taking the space of other cell? In the code below, random cells were selected to display images. One image in one cell. The problem is that, the image seems to take other cells as well. ... setPreferredSize(new Dimension(600,600)); final int ROWS = 6; final int COLS = 6; final int IMAGES = 10; setLayout(new GridBagLayout()); GridBagConstraints gc = new GridBagConstraints(); gc.weightx = 1d; gc.weighty = 1d; gc.insets = new Insets(0, 0, 0, 0);//top, left, bottom, and right gc.fill = GridBagConstraints.NONE; JLabel[][] label = new JLabel[ROWS][COLS]; Random rand = new Random(); // fill the panel with labels for (int i=0;i<IMAGES;i++){ ImageIcon icon = createImageIcon("myImage.jpg"); int r, c; do{ //pick random cell which is empty to avoid overlap image in the same cell r = (int)Math.floor(Math.random() * ROWS); c = (int)Math.floor(Math.random() * COLS); } while (label[r][c]!=null); //scale the image int x = rand.nextInt(20)+30; int y = rand.nextInt(20)+30; Image image = icon.getImage().getScaledInstance(x,y, Image.SCALE_SMOOTH); icon.setImage(image); JLabel lbl = new JLabel(icon); gc.gridx = r; gc.gridy = c; add(lbl, gc); //add image to the cell label[r][c] = lbl; }

    Read the article

  • How to display image within cell boundary

    - by Jessy
    How can I place an image within the cell boundary? I mean without taking the space of other cell? In the code below, random cells were selected to display images. One image in one cell. The problem is that, the image seems to take other cells as well. ... setPreferredSize(new Dimension(600,600)); final int ROWS = 6; final int COLS = 6; final int IMAGES = 10; setLayout(new GridBagLayout()); GridBagConstraints gc = new GridBagConstraints(); gc.weightx = 1d; gc.weighty = 1d; gc.insets = new Insets(0, 0, 0, 0);//top, left, bottom, and right gc.fill = GridBagConstraints.NONE; JLabel[][] label = new JLabel[ROWS][COLS]; Random rand = new Random(); // fill the panel with labels for (int i=0;i<IMAGES;i++){ ImageIcon icon = createImageIcon("myImage.jpg"); int r, c; do{ //pick random cell which is empty to avoid overlap image in the same cell r = (int)Math.floor(Math.random() * ROWS); c = (int)Math.floor(Math.random() * COLS); } while (label[r][c]!=null); //scale the image int x = rand.nextInt(20)+30; int y = rand.nextInt(20)+30; Image image = icon.getImage().getScaledInstance(x,y, Image.SCALE_SMOOTH); icon.setImage(image); JLabel lbl = new JLabel(icon); gc.gridx = r; gc.gridy = c; add(lbl, gc); //add image to the cell label[r][c] = lbl; }

    Read the article

  • Getting svn: E170000: Unrecognized URL scheme for my custom Svn Gradle plugin

    - by Ip Doh
    I wrote a custom gradle plugin using groovy to do basic svn tasks like, Checkout, Clean, Tag etc. The groovy class calls the svn command line client to do these operations, It works fine when i run it on my windows system but the same plugin gives the following error when i run it on a linux system (Centos). svn: E170000: Unrecognized URL scheme for '%22https://source.mycompany.net/svn/MyProject/trunk%22' Am able to make the same calls to the command line client through the command prompt or shell script without any issues. So what is the difference with Here is my code sample String command =String.format("svn co -r %d --non-interactive --trust-server-cert -- username %s --password %s --depth infinity \"%s\" \"%s\"", getRevision(), getUserName(), getUserPassword(), getSrcUrl(), getDir()); Process svnProcess = Runtime.getRuntime().exec(command); BufferedReader stdInput = new BufferedReader(new InputStreamReader(svnProcess.getInputStream())); BufferedReader stdError = new BufferedReader(new InputStreamReader(svnProcess.getErrorStream())); String statusOutputLine ="" while ((statusOutputLine = stdInput.readLine()) != null) { logger.quiet(" " + statusOutputLine); } while (( statusOutputLine = stdError.readLine()) != null) { logger.error(statusOutputLine) throw new Exception(statusOutputLine) } logger.quiet("Successfully Checked out the work space") i do have neon installed on the system -bash-4.1$ svn --version svn, version 1.6.11 (r934486) compiled Jun 25 2011, 11:30:15 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: ra_neon : Module for accessing a repository via WebDAV protocol using Neon. handles 'http' scheme handles 'https' scheme ra_svn : Module for accessing a repository using the svn network protocol. with Cyrus SASL authentication handles 'svn' scheme ra_local : Module for accessing a repository on local disk. handles 'file' scheme

    Read the article

< Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >