Search Results

Search found 29619 results on 1185 pages for 'android virtual device'.

Page 562/1185 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

• how to setup duel monitors an xorg.conf

  - by MrMonty

  # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

  Read the article

• Time to Get Started with Oracle Data Integrator 12c!

  - by Sandrine Riley

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} It is time to get started with Oracle Data Integrator 12c! We would like to highlight for you a great place to begin your journey with ODI.  Here you will find the Getting Started section for ODI, which provides a few options. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Step 1 – Start by downloading the Getting Started (PDF). The document provides general background information and detailed examples to help you learn how to use Oracle Data Integrator. This document guides you through a first project with Oracle Data Integrator 12c, and the instructions in this document are required for using the Getting Started Demonstration Environment. If you would like to run the Getting Started Demonstration Environment on your system go to Step 2 A. If you would like to run the Getting Started Demonstration Environment installed and pre-configured in a Virtual Image, go to Step 2 B. Step 2 - A-   A -  If you would like to run the Getting Started Demo Environment on your system, you will want to then download the Demo Environment for Getting Started (ZIP) archive containing ODI metadata, configuration scripts and sample data. B-   B -  Alternatively, a pre-configured virtual machine is available with the Getting Started installation and configuration. The Virtual Machine platform uses Oracle Virtual Box technology, and use of this configuration would necessitate the download/installation of Virtual Box and the Getting Started virtual machine. If you prefer this route and would rather run the Getting Started Demonstration Environment installed and preconfigured in a Virtual Machine, please download the ODI 12c Getting Started Virtual Machine. Step 3 – In continuation with the Getting Started Demonstration Environment and the Getting Started Guide, you will now be able to run through a first project with Oracle Data Integrator. Now that you have successfully done the exercises above, you may want to play on your own, and develop with Oracle Data Integrator on your environment...  here you can download a full version of Oracle Data Integrator 12c.  Enjoy, and happy developing! Learn more about Oracle Data Integrator; including FAQ, the Oracle by Example Series, Sample Code, and White Papers. Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

  - by Eldian

  I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

  Read the article

• How can I make a webmail URL available from any hosted domain?

  - by James

  I run Roundcube webmail on my VPS. At the moment, it is only accessible from one virtual server hosted on the server, unless a separate Roundcube installation is created for other virtual servers. I would like to be able to make webmail available from any domain/ virtual server that I host, just by adding /webmail to the end. I'm sure Apache must allow me to do this - only problem is, I don't know how! Any ideas?

  Read the article

• Cannot see user desktop when I log in

  - by Jesi

  I am very new to Ubuntu. I recently got a new laptop running Windows 7. I am using Virtual Box and just installed the Ubuntu 12.10 ISO as a new Virtual Machine within Virtual Box. Everything seemed to install just fine and I even added the Guest Additions under Devices. The problem is that I cannot see the menus and my login information. The virtual machine says it is running; however, I do not have the Applications, Places, System, etc. tray to select from. Is there something I am supposed to do after logging in to get this? I entered my password and everything seemed fine, I just don't have those drop-down menus available... Thank You! Jesi

  Read the article

• How to disable integrated webcam and still be able to use an external one

  - by alikasundara

  I am looking for a way to disable the webcam that is integrated into my laptop. The webcam is using uvcvideo module but I do not want to blacklist it since it is also being used by an external webcam I have. Is there any way of disabling the device itself without touching the modules list? This is how the webcams are listed by lsusb. The first one is an integrated one (It is identified by some apps as BisonCam NB Pro), the second one is the external Logitech C525: Bus 002 Device 004: ID 5986:0361 Acer, Inc Bus 003 Device 002: ID 046d:0826 Logitech, Inc. I have already checked BIOS - there is no way of disabling the webcam from there. Besides I would love to learn how to disable the device by ID anyway. Thanks!

  Read the article

• Microsoft gagne contre Motorola, les brevets Wi-Fi et H.264 violés par la Xbox et Windows doivent être soumis au FRAND, selon la justice

  Brevets : Microsoft gagne contre Motorola en Allemagne les terminaux Android du constructeur interdits de ventes sur le territoire Les procès Android se poursuivent avec leurs lots de rebondissements, et laissent peu à peu place à des décisions de justice. Après le verdict de l'affaire Google contre Oracle pour violation de brevets Java dans Android, dont le géant de la recherche est sorti vainqueur, c'est au tour d'un autre gros feuilleton IT qui dure depuis plus d'un an de livrer sa sentence. Un tribunal régional de Munich en Allemagne a arrêté que les téléphones Android de Motorola Mobility violent les brevets de Microsoft. Plus précisément, ces dispositifs empiètent s...

  Read the article

• Sonicwall site-to-site can not access remote network

  - by vpnwizard

  I have 2 SonicWall devices (tz100) in 2 different geographical locations. They are connected to each other using site-to-site vpn connection and this works just great. Device A network - 192.168.1.0/24 Device B network - 192.168.2.0/24 When I connect to one device, I can access, from my computer, anything on that specific subnet. However, I am unable to view anything, from my computer, on the other network. Is there a setting somewhere that will forward my requests to the other subnet? Example - I VPN into Device A, but would like to get to a server which is on the Device B network (192.168.2.0/24)

  Read the article

• How can I set deadline as the I/O scheduler for USB Flash devices by using udev rules?

  - by ????

  I have set CFQ as the default I/O scheduler. I often get bad performance when I write data into a Flash device. This is resolved if I use deadline as the I/O scheduler for USB Flash devices. I can't always change the scheduler manually, right? I think writing udev rules is a good idea. Can someone please write rules for me? I want: When I plug in a USB device, detect the type of the device. If it is a portable USB hard disk, do nothing (I think if a device has more than one partitions, it always a portable hard disk. If it is a USB Flash device, set deadline as it's scheduler.

  Read the article

• Persisting simple tree with (Fluent-)NHibernate leads to System.InvalidCastException

  - by fudge

  Hi there, there seems to be a problem with recursive data structures and (Fluent-)NHibernate or its just me, being a complete moron... here's the tree: public class SimpleNode { public SimpleNode () { this.Children = new List<SimpleNode> (); } public virtual SimpleNode Parent { get; private set; } public virtual List<SimpleNode> Children { get; private set; } public virtual void setParent (SimpleNode parent) { parent.AddChild (this); Parent = parent; } public virtual void AddChild (SimpleNode child) { this.Children.Add (child); } public virtual void AddChildren (IEnumerable<SimpleNode> children) { foreach (var child in children) { AddChild (child); } } } the mapping: public class SimpleNodeEntity : ClassMap<SimpleNode> { public SimpleNodeEntity () { Id (x => x.Id); References (x => x.Parent).Nullable (); HasMany (x => x.Children).Not.LazyLoad ().Inverse ().Cascade.All ().KeyNullable (); } } now, whenever I try to save a node, I get this: System.InvalidCastException: Cannot cast from source type to destination type. at (wrapper dynamic-method) SimpleNode. (object,object[],NHibernate.Bytecode.Lightweight.SetterCallback) at NHibernate.Bytecode.Lightweight.AccessOptimizer.SetPropertyValues (object,object[]) at NHibernate.Tuple.Entity.PocoEntityTuplizer.SetPropertyValuesWithOptimizer (object,object[]) My setup: Mono 2.8.1 (on OSX), NHibernate 2.1.2, FluentNHibernate 1.1.0

  Read the article

• How can I get my wireless webcam to work?

  - by hellocatfood

  I recently bought this wireless webcam. I'm having trouble getting it to work on Ubuntu 11.04. I ran lsusb and got the folowing information about the device Bus 006 Device 003: ID 0416:a91a Winbond Electronics Corp. I did a Google serach for teh device ID and this website informs me that it matches the LogiLink Wireless Webcam (so Maplin probably just rebranded this!). What this website states is that this device should work, which it doesn't. The problem I'm facing is that I don't get any actual video being streamed or shown. The built in microphone works and, when running Cheese, when I press the camera button on the webcam itself the software recognises that the button is pressed. On that note, when running cheese from the terminal with this webcam attached I get the following error libv4l2: error getting pixformat: Invalid argument libv4l2: error setting pixformat: Input/output error Any help is appreciated

  Read the article

• Not able to safely remove external disk after having mounted and unmounted a VHD on it

  - by Agnel Kurian

  I am using Windows 7 SP 1. I have an external hard disk (Seagate 500GB) which I am able to use without problems most of the time. I am able to plug it in, use it and then safely unmount it via the "Eject USB Mass Storage Device" option in the taskbar tray. However, if I attach a VHD file located on this disk using "Disk Management", then detach the VHD and finally try to safely disconnect the disk via the system tray, I get an error which says: "Problem Ejecting USB Mass Storage Device: Windows can't stop your 'Generic volume' device because a program is still using it. Close any programs that might be using the device, and then try again later." How do I avoid this problem? Which process could still be accessing the device (even after I have closed the "Disk Management" application) ?

  Read the article

• How to reinstall latest Ubuntu Touch on Nexus 4?

  - by Galen Gruman

  I've followed the instructions on https://wiki.ubuntu.com/Touch/Install, first doing the steps that lead to phablet-flash -b and then the manual ones. In both cases, I get stuck at the Google boot screen. It does not boot into Touch. No errors during manual install, and adb devices shows the device, but I get the following with phablet-flash or phablet-flash -b (second and subsequent times, not the first time): Device detected as /system/bin/sh: getprop: not found Unsupported device, autodetect fails device When working on flipped images, detection does not work and would require -d Not clear what that all means. The Nexus 4 had the initial Touch dev preview on it, FYI. I saw no separate instructions for upgrading from that.

  Read the article

• How can I make Banshee re-encode FLAC to Ogg Vorbis when copying to my player?

  - by Michael E

  I have most of my music in FLAC on my large storage device, and would like to automatically re-encode it in Ogg Vorbis when copying it to my portable audio player (Sansa Fuze v2). I have set my Fuze to MTP mode and told Banshee to encode to Ogg Vorbis with quality 4 in the Device Properties dialog for the Fuze (I would use MSC mode, but don't have an encoding option in the device properties when I do that). However, when I copy music to the device, either by dragging it from the music library or by syncing a playlist, the full FLAC files are copied rather than transcoded and written as Oggs. How can I get my Banshee setup re-encoding the audio? If StackExchange supported bonus points, I'd give bonus points for a solution that only re-encoded music that was already losslessly encoded, but I don't think that's possible.

  Read the article

• vmbuilder fails on chroot

  - by Bruce

  I am trying to install virtual machine with this command, but have no success: vmbuilder kvm ubuntu --verbose --suite precise --flavour virtual \ --part partitions.txt --ip 192.168.1.3 --hostname edb1 --arch amd64 \ -o --libvirt qemu:///system --user someuser --pass somepass \ --raw /home/virtual-machines/edb1.disk1.img \ --raw /home/virtual-machines/edb1.disk2.img \ --domain somedomain.com --mem 4096 --cpus 4 This is the error: ... I: Extracting xz-utils... I: Extracting zlib1g... W: Failure trying to run: chroot /tmp/tmp_JdKzu mount -t proc proc /proc , stderr: The host kernel is not original but modified by server provider. Why is the chroot needed for installation?

  Read the article

• Where can I get a splitter to connect a device with a single 3.5 mm plug into the audio input/output jacks on my laptop?

  - by XinJeisan

  I recently bought the :Hype Retro Handset for Mobile Phone" -- its just a device that looks like a handset to use when chatting on a computer or mobile phone that plugs into the phone/computer with a single 3.5 mm plug. I was hoping to use it on my windows 7 Toshiba laptop. I can hear audio fine through the handset but what I'm saying is not being picked up on the handset. On the box it says "some phones and computers may need additional adapters," so I'm hoping it is possible to get a splitter or something for this to work properly. I did email the parent company (http://dglusa.com/) but I haven't heard from them, and, looking over their website, I doubt I will. I also went to the local radio shack, and the guy said I needed a splitter, but he didn't know where to get one. I can find the kind of splitter I think I need online, but I'm unsure whether they are just for output or can also do input/output.

  Read the article

• Not enough components to start the RAID array?

  - by urig

  I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. Unfortunately, Ubuntu has not been able to mount the drive automatically. Having started up Disk Utility I see the drive as a multi disk device called "Array (Array)" showing Metadata Version 0.90.0. The device state is: "Not Running, not enough components to start". When I click the "Start RAID Array" button I get an error saying: "Not enough components to start the RAID array". Can you please tell me which components are missing and how to install them to get access to the drive's filesystem?

  Read the article

• Unable to make sound play in headset

  - by user50849

  Top right, I click the sound icon, select sound settings, and connect my USB-headset. I can them see the headset being detected as it pops up in the menu. I click it, and expect the currently played audio to get sent to the headset instead. My problem is that it does not. The audio keeps playing through the built-in speakers. More info: The icon for my built-in card in the sound settings is a circuit with a note symbol on top. The symbol for the headset is just black background with a "No" symbol on it. Might mean it doesn't work somehow. I installed pavucontrol, and notice that no second sound card shows up in there. When connecting, the syslog says Jun 20 09:38:46 yuna kernel: [40144.553431] usb 2-1.2: new full-speed USB device number 11 using ehci_hcd Jun 20 09:38:46 yuna kernel: [40144.650609] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input20 Jun 20 09:38:46 yuna kernel: [40144.650895] generic-usb 0003:0D8C:000C.000B: input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.0-1.2/input3 Jun 20 09:38:46 yuna mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" Jun 20 09:38:46 yuna mtp-probe: bus: 2, device: 11 was not an MTP device

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• NHibernate mapping many to many three tables [closed]

  - by Tony

  I am trying to get this solved but can't so far. all kind of errors. These are my db tables Person (personID, name, age) Role (roleID, roleName) PersonRoles(personRolesID, personID, roleID) this is my domain class public Person { public virtual Roles RolesForThisPerson {get;set;} public virtual string Name {get;set;} public virtual int Age {get;set;} } public Roles { public virtual IList<string> RoleList {get;set;} } I am totally lost on how to approach this. I am so confused about sets, bags, lists... i don't even know where to start. Anybody can give me a little push here? thanks

  Read the article

• How to enable a CD/DVD drive? It is not listed in "My Computer"

  - by Senthil

  I just got a laptop from a friend. The CD/DVD drive is not present in "My Computer". But the tray comes out when I press the button and everything. I remember long time ago, enabling it by changing some registry value, but I forgot which one. I have administrator privileges. I can see it in the device manager. But it has a yellow exclamation icon on it. My OS: Windows XP SP3 In Device Manager, inside the properties window for this device, the following error is shown in the "Device Status" box. A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32) How do I enable my CD/DVD drive?

  Read the article

• Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

  - by Tim Murphy

  This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• Virtualization for Developers with VirtualBox

  Open source virtualization for multiple platforms VirtualBox - Open source - Virtual machine - Programming - Languages

  Read the article

• How can I increase resolution when impossible to set up nvidia driver?

  - by Asimov4

  I was stuck at 1024x758 before creating an /etc/X11/xorg.conf file as follows which works well to allow me to have a resolution of 1920x1200 with the vesa driver. Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" EndSubSection EndSection But now my display is kind of slow. I have an NVIDIA GeForce 8600GT but really cannot find how to set up the driver to work. Are there any alternatives to VESA that would work faster?

  Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >