Search Results

Search found 19840 results on 794 pages for 'bit blit'.

Page 563/794 | < Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >

• RAID 5 - DELL 2850 and others

  - by Kiara

  I have installed Ubuntu on a DELL 2850 and I have configured an array of 5 disks (SCSI 73GB 10K) in RAID5. I wanted to simulate a drive error so in the middle of something I just took one of the drives out and put it back again after a bit. Then the drive shows an orange light and seems to be rebuilding but actually is taking hours and hours with no results. So I went to the PERC utility (Ctrl+M) and the disk shows "REBLD". But it never gets to an online state. So I went to Objects - Physical drives - Rebuilding - View rebuild process. And in here I can see a bar moving from 0%... but if I reboot before finishing and get into the PERC Utility again, it seems to start again rebuilding from 0% - so it is not rebuilding automatically. My concern is: what would happen in a real situation? Do I have to just switch the server off and go to the Perc utility to start the rebuilding manually? I thought the whole point was to have this done automatically and without the need of stopping the server. Or does it perhaps rebuild automatically indeed but needs to have enough time without rebooting because otherwise the rebuilding process will start from scratch? It seems to take more than 3h for a 73gb disk! My second question is: can I mix then hard drives? So if I have a RAID of 5x73GB 10K can I use different size (146GB) or speeds (15K)? Apparently someone said it is OK in here Poweredge 2850: replace disk with larger in RAID?

  Read the article

• 3GB RAM Installed and Detected by BIOS, Windows Vista 32bit Only Sees 2GB

  - by Nathan Taylor

  I am attempting to install more RAM on a Windows Vista 32bit machine which is using a X6DAL-XG motherboard and the RAM amount reported in the BIOS is 3GB+, but Windows is only reporting 2GB installed. The motherboard has 6 RAM bays which I have populated with various combinations of 4 1GB sticks, and 2 512mb sticks, but no matter how I configure them Windows doesn't see more than 2GB. I realize of course 32-bit Windows has a 3gb cap on memory, but that doesn't explain why it will only report 2GB when there are in fact (currently) 5GB installed. I should think I would be able to see at least 3GB. According to the spec list for the motherboard the minimum RAM requirements are DDR333/266mhz installed in pairs. I have done this exactly, and the BIOS isn't reporting any problems at POST. RAM Configuration (according to CPU-Z): Slot #1: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #2: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #3: PQI - 512mb PC2700 (166mhz) Slot #4: Kingston 128mx72D266C25 - 1024mb PC2100 (133mhz) Slot #5: Kingston KVR266X72RC25/1024 - 1024mb PC2100 (133mhz) Slot #6: PQI - 512mb PC2700 (166mhz) I'm not sure if memory specs above conflict with this statement in the motherboard manual or not: Memory Support The X6DAL-XG supports up to 12GB/24GB of registered ECC DDR333/266 (PC2700/PC2100) memory. The motherboard was designed to support 4GB (PC2100) modules in each slot, but only the 2GB modules have been tested. When using registered ECC DDR333 (PC2700) memory, installing four pieces of double-banked memory or six pieces of single-banked memory is supported. So, am I doing something wrong with the RAM I have now, or is there some sort of compatibility problem which I am missing? Thanks!

  Read the article

• can't find port 22 traffic under VirtualBox

  - by telliott99

  I'm trying to learn to use tcpdump. I thought I'd eavesdrop on my ssh login. The setup is a bit unusual, I have OS X Lion running VirtualBox, with Ubuntu running in the VM. I have ssh enabled and can login from OS X normally: > ssh -p 22 10.0.1.2 -l telliott Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-17-generic i686) * Documentation: https://help.ubuntu.com/ 0 packages can be updated. 0 updates are security updates. Last login: Sat Mar 31 19:54:36 2012 from toms-mac-mini.local telliott@U32:~$ logout Connection to 10.0.1.2 closed. > I have not obfuscated the ssh port on Ubuntu. From OS X, stroke gives what I expect: > ./stroke 10.0.1.2 22 22 Port Scanning host: 10.0.1.2 Open TCP Port: 22 ssh So from OS X I do: > sudo tcpdump -i en1 -v port 22 Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes Then I login from OS X to Ubuntu using ssh, but I see nothing with tcpdump. Here is ifconfig from Ubuntu: telliott@U32:~$ ifconfig eth1 Link encap:Ethernet HWaddr 08:00:27:d7:ba:0e inet addr:10.0.1.2 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fed7:ba0e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:799 errors:0 dropped:0 overruns:0 frame:0 TX packets:465 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:96863 (96.8 KB) TX bytes:68638 (68.6 KB) Where are the packets I was hoping to see? Thanks for any help.

  Read the article

• Can I change the "From" name and address without going into Mail.app's preferences?

  - by Arjan van Bentem

  Can I somehow add an editable "From" field to Mail.app, a bit like Virtual Identity for Thunderbird, just like I could change the "Reply To" address on the fly? In Mail.app, one can set up multiple email addresses for a single account by just entering a comma-seperated list like [email protected], [email protected]. Next, when composing a message, Mail offers a dropdown to select a "From" address. And when replying†, it automatically selects the right address if it can find a match: Nice, but I'd like to be able to change the "From" on the fly, without going into the Account Information. Also, in previous versions of Mail one could even specify multiple Full Names for a single account: Email Address: Arjan <[email protected]>, Arjan on SU <[email protected]> But nowadays, Mail only uses the setting of Full Name, and even ignores names in the Email Address field when no value for Full Name is set at all. Hence, it would be great if I could change the Full Name on the fly as well. I had no luck finding a plugin for Mail yet. † When using sub-addressing, anything that is sent to [email protected] is simply delivered to [email protected]. I'd then like to reply with the same full address, rather than just [email protected] if Mail cannot find a match, without going into the Account Information first. I sometimes also want to compose a new message with a new sub-addressing-address.

  Read the article

• Is there a tool that can test what SSL/TLS cipher suites a particular website offers?

  - by Jeremy Powell

  Is there a tool that can test what SSL/TLS cipher suites a particular website offers? I've tried openssl, but if you examine the output: $ echo -n | openssl s_client -connect www.google.com:443 CONNECTED(00000003) depth=1 /C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA verify error:num=20:unable to get local issuer certificate verify return:0 --- Certificate chain 0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com i:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA 1 s:/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- MIIDITCCAoqgAwIBAgIQL9+89q6RUm0PmqPfQDQ+mjANBgkqhkiG9w0BAQUFADBM MQswCQYDVQQGEwJaQTElMCMGA1UEChMcVGhhd3RlIENvbnN1bHRpbmcgKFB0eSkg THRkLjEWMBQGA1UEAxMNVGhhd3RlIFNHQyBDQTAeFw0wOTEyMTgwMDAwMDBaFw0x MTEyMTgyMzU5NTlaMGgxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpDYWxpZm9ybmlh MRYwFAYDVQQHFA1Nb3VudGFpbiBWaWV3MRMwEQYDVQQKFApHb29nbGUgSW5jMRcw FQYDVQQDFA53d3cuZ29vZ2xlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkC gYEA6PmGD5D6htffvXImttdEAoN4c9kCKO+IRTn7EOh8rqk41XXGOOsKFQebg+jN gtXj9xVoRaELGYW84u+E593y17iYwqG7tcFR39SDAqc9BkJb4SLD3muFXxzW2k6L 05vuuWciKh0R73mkszeK9P4Y/bz5RiNQl/Os/CRGK1w7t0UCAwEAAaOB5zCB5DAM BgNVHRMBAf8EAjAAMDYGA1UdHwQvMC0wK6ApoCeGJWh0dHA6Ly9jcmwudGhhd3Rl LmNvbS9UaGF3dGVTR0NDQS5jcmwwKAYDVR0lBCEwHwYIKwYBBQUHAwEGCCsGAQUF BwMCBglghkgBhvhCBAEwcgYIKwYBBQUHAQEEZjBkMCIGCCsGAQUFBzABhhZodHRw Oi8vb2NzcC50aGF3dGUuY29tMD4GCCsGAQUFBzAChjJodHRwOi8vd3d3LnRoYXd0 ZS5jb20vcmVwb3NpdG9yeS9UaGF3dGVfU0dDX0NBLmNydDANBgkqhkiG9w0BAQUF AAOBgQCfQ89bxFApsb/isJr/aiEdLRLDLE5a+RLizrmCUi3nHX4adpaQedEkUjh5 u2ONgJd8IyAPkU0Wueru9G2Jysa9zCRo1kNbzipYvzwY4OA8Ys+WAi0oR1A04Se6 z5nRUP8pJcA2NhUzUnC+MY+f6H/nEQyNv4SgQhqAibAxWEEHXw== -----END CERTIFICATE----- subject=/C=US/ST=California/L=Mountain View/O=Google Inc/CN=www.google.com issuer=/C=ZA/O=Thawte Consulting (Pty) Ltd./CN=Thawte SGC CA --- No client certificate CA names sent --- SSL handshake has read 1777 bytes and written 316 bytes --- New, TLSv1/SSLv3, Cipher is AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : AES256-SHA Session-ID: 748E2B5FEFF9EA065DA2F04A06FBF456502F3E64DF1B4FF054F54817C473270C Session-ID-ctx: Master-Key: C4284AE7D76421F782A822B3780FA9677A726A25E1258160CA30D346D65C5F4049DA3D10A41F3FA4816DD9606197FAE5 Key-Arg : None Start Time: 1266259321 Timeout : 300 (sec) Verify return code: 20 (unable to get local issuer certificate) --- it just shows that the cipher suite is something with AES256-SHA. I know I could grep through the hex dump of the conversation, but I was hoping for something a little more elegant. I would prefer Linux tools, but Windows (or other) would be fine. This question is motivated by the security testing I do for PCI and general penetration testing. Update: GregS points out below that the SSL server picks from the cipher suites of the client. So it seems I would need to test all cipher suites one at a time. I think I can hack something together, but is there a tool that does particularly this?

  Read the article

• Triple boot WIndows 7, Windows 8, and Mountain Lion on Macbook Pro

  - by Nathan

  Ok, So I have a bit of a unique situation here I could use some help on. I've modded my summer 2011 MBPro to have 2 harddrives by replacing the optical drive. OSX Mountain Lion is installed on a single partition of a 120GB SSD. The second drive is 750GB, partitioned as 550GB, 150GB, and ~50GB. I've set the 550GB to act as my OSX homefolder, but I'd like to install windows 7 and Windows 8 on the remaining partitions. It Took a while, but by following this guide, I eventually found a way to install Windows without a CD/DVD drive by following this http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdrive-with-virtualbox/ It worked flawlessly for creating both windows 7 and windows 8 images that I could clone onto FAT32 partitions. However, I have encountered a problem when trying to triple boot. After I put Windows 8 onto the ~50GB partition and tried to boot into windows 7 I get an error that says something like: error: 0x0000000e The Boot selection failed because the required device is inaccessible. If I re-clone the windows 7 image onto the drive and select the option to "replace BCD" file for the drive, windows 7 will boot but windows 8 now gives me the same exact error. I realize this is a pretty extensive setup, but if anyone has some insight I'd love to hear it.

  Read the article

• Snort/Barnyard2 Logging

  - by Eric

  I need some help with my Snort/Barnyard2 setup. My goal is to have Snort send unified2 logs to Barnyard2 and then have Barnyard2 send the data to other locations. Here is my currrent setup. OS Scientific Linux 6 Snort Version 2.9.2.3 Barnyard2 Version 2.1.9 Snort command snort -c /etc/snort/snort.conf -i eth2 & Barnyard2 command /usr/local/bin/barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.log -w /var/log/snort/barnyard.waldo & snort.conf output unified2: filename snort.log, limit 128 barnyard2.conf output alert_syslog: host=127.0.0.1 output database: log, mysql, user=snort dbname=snort password=password host=localhost With this setup, barnyard2 is showing all of the correct information in the database and I'm using BASE to view it on the web GUI. I was hoping to be able to send the full packet data to syslog with barnyard2 but after reading around, it seems that it is impossible to do that. So I then started trying to modify the snort.conf file and add lines like "output alert_full: alert.full". This definitely gave me a lot more information but still not the full packet data like I want. So my question is, is there anyway I can use barnyard2 to send the full packet data of alerts to a human readable file? Since I can't send it directly to syslog, I can create another process to take the data from that file and ship it off to another server. If not, what flags and/or snort.conf configuration would you recommend to get the most data possible but still be able to handle quite a bit of traffic? In the end of it all, these alerts will be shipped to a central server via a SSH tunnel. I'm trying to stay away from databases.

  Read the article

• Recommended setting for using Apache mod_mono with a different user

  - by Korrupzion

  Hello, I'm setting up an ASP.net script in my linux machine using mod_mono. The script spawn procceses of a bin that belongs to another user, but the proccess is spawned by www-data because apache runs with that user, and i need to spawn the proccess with the user that owns the file. I tried setuid bit but it doesn't make any effect. I discovered that if I kill mod-mono-server2.exe and I run it with the user that I need, everything works right, but I want to know the proper way to do this, because after a while apache runs mod-mono-server2.exe as www-data again. Mono-Project webpage says: How can I Run mod-mono-server as a different user? Due to apache's design, there is no straightforward way to start processes from inside of a apache child as a specific user. Apache's SuExec wrapper is targeting CGI and is useless for modules. Mod_mono provides the MonoStartXSP option. You can set it to "False" and start mod-mono-server manually as the specific user. Some tinkering with the Unix socket's permissions might be necessary, unless MonoListenPort is used, which turns on TCP between mod_mono and mod-mono-server. Another (very risky) way: use a setuid 'root' wrapper for the mono executable, inspired by the sources of Apache's SuExec. I want to know how to use the setuid wrapper, because I tried adding the setuid to 'mono' bin and changing the owner to the user that I want, but that made mono crash. Or maybe a way to keep running mono-mod-server2.exe separated from apache without being closed (anyone has a script?) My environment: Debian Lenny 2.6.26-2-amd64 Mono 1.9.1 mod_mono from debian repository Dedicated server (root access and stuff) Using apache vhosts -I use mono for only that script Thanks!

  Read the article

• Advice on migrating from a Samba PDC

  - by pgb

  When we started our software development company, we decided to use Samba as a PDC for the few Windows workstations we had. We use Samba with OpenLDAP, and it has been a good replacement for AD for almost 6 years now (using Windows XP workstations). Now I'm facing a few problems with our setup: The Linux server where the PDC runs is very outdated (and is a Gentoo install, don't ask why!) We started using Windows 7 on some of the workstations, and these can't join the Samba domain (there's a workaround, I know) Our company has grown a bit, and we have now about 20 workstations (and plan to have more in the near future). I have to reinstall our PDC, and was thinking on updating to another Linux distro and the latest Samba 3.4. However, I started having second thoughts, and now I think going to a Windows Server for the PDC is the way to go. The main drivers to opt for a Windows Server would be its easy administration and the ability to use Windows 7 out of the box, without any registry hacks. My question(s) then is(are): How should I do this migration? Can I keep the same domain name? What will happen to the users? Will they be recreated and won't be identified by the workstations as being the same user, even if the actual username is the same? What steps would you recommend me to migrate from Samba to Windows Server? Bonus question: If you think staying in Samba is the way to go with my current setup, I'm also interested on your thoughts.

  Read the article

• Redhat 5.5: Multi-thread process only uses 1 CPU of the available 8

  - by Tonny

  Weird situation: Redhat Enterprise 5.5 (stock install, no updates, x64) on a HP z800 workstation. (Dual Xeon 2,2 Ghz. 8 cores, 16 if you count Hyper-threading. RH sees 16 cores.) We have an application that can utilize 1, 2 or 4 threads for heavy calculations. Somehow all these threads run on the same core at 100% load (the other 15 cores are nearly idle) so there is absolutely no benefit from the extra threads. In fact there is a slight slowdown as the threads get in each others way on the single core. How do I get them to run on separate cores (if possible)? Application is 64 bit. Can't change anything about the software except changing the threads setting. Is there some obscure Linux setting I can try to change? (I'm a True64 and Aix guy. I use Linux, but have no in depth knowledge of the process scheduling on Linux.)

  Read the article

• VMware databursts to vCenter

  - by Erwin Blonk

  [edit Nov.16th 2009: Thank you for the responses. I'm no longer on this project so the problem is out of my hands. Be sure I will return with other problems :-) ] I have a strange occurence of regular databursts over my WAN links from 2 sites to a site with vCenter. What happens is that a vCenter server is managing local ESX 3.5 servers and 2 from 2 sites across a WAN link. Each server sends an approximately 3MB worth of TLS data (less than 10% of the time it varies to higher or lower) every 15 minutes (with a margin of 2 minutes). So far, I've not been able to single out a process that causes it. I looked through all applications on each site. So far, it seems to originate from one server on each site. Although it may be coincidence and therefore not relevant, I found that one server, with very few exceptions, does a burst at 00:00 on the hour. The other 3 during the hour are a bit off the 15 minute mark but back at the top of the hour, you can sync your watch on it. The other server follows 5 minutes after that with no such precision. But, as said, it never differs more than 2 minutes. Servers are ESX 3.5, vCenter is 2.5.

  Read the article

• stunnel not working - stunnel.pem: No such file or directory

  - by Marronsuisse

  I am trying to install stunnel on an amazon LINUX machine. (i want to configure postfix so that it sends its emails through amazon ses) I first tried to install from the tar.gz package download from http://www.stunnel.org and installed with the commands: ./configure make make install but than the stunnel command was still not found. Then I installed with yum install stunnel. But now when I try I get: sudo stunnel 2012.06.23 06:51:53 LOG7[20071:3078289200]: Snagged 64 random bytes from /root/.rnd 2012.06.23 06:51:53 LOG7[20071:3078289200]: Wrote 1024 new random bytes to /root/.rnd 2012.06.23 06:51:53 LOG7[20071:3078289200]: RAND_status claims sufficient entropy for the PRNG 2012.06.23 06:51:53 LOG7[20071:3078289200]: PRNG seeded successfully 2012.06.23 06:51:53 LOG3[20071:3078289200]: stunnel.pem: No such file or directory (2) So it seems there is still a problem with the install. When I use the locate stunnel command, I see files a bit everywhere. How can I do to have a clean install of stunnel? Edit: i was following this procedure: http://docs.amazonwebservices.com/ses/latest/DeveloperGuide/SMTP.MTAs.SecureTunnel.html when I got stuck at point 5 and got the stunnel.pem: No such file or directory message.

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• Windows 7 AIK help

  - by microchasm

  I've just got in a few Windows 7 (64, Windows 7 Professional) machines, and I'm trying to get the AIK 2010 working. I've set up one of the machines, and installed AIK and MDT on it. I've followed the directions at http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx about 3 times now, and also tried the built-in .chm help files that came with AIK. In AIK I grab the install.wim image off the OEM cd, at which point it asks me which version (I select Professional). I follow the rest of the instructions creating a new Autounattend answer file, and fill in the various bits and pieces according the the step-by-step guides. I verify the Answer file (No warnings or errors), save it, and copy it onto a USB drive. I go to another machine, insert it's OEM Win7 Disk, and power on. I've set BIOS to boot from CD, so it goes directly into the installation. Once The files are loaded, and Setup starts, it immediately asks which version to install (Home basic, Home Premium, Professiona, Ultimate). Ugh, I thought it was supposed to be an automated install, and that selecting the Version when opening the .wim file would answer this question. I looked for an option to set which version to be installed on the net, in the help, and in AIK itself; to no avail. Anyway, just for laughs I select Professional,and hit continue. It copies files for about 10 seconds, then fails with the following error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information. [OK]". Clicking OK reboots the box, and obviously there are no log files because the OS isn't installed. It is a Dell Optiplex 380 , Intel Core Duo 2.93 GHzl 4 GB RAM, 64 Bit. Any help would be REALLY appreciated.

  Read the article

• How do I find out the Mac Address Firefox submits for Geolocation?

  - by Jim McKeeth

  I moved, but have the same router and cable box. Now when I visit Google Maps it still shows my old location. I went to the SkyhookWireless update page to update my Mac Address with my new location. The process is you put in your Mac address and it shows you the current location, and then you adjust that location and submit it. When I got the Mac Address from the status page on my router Skyhook reported that location as in Pakistan, which isn't even the correct continent (as my old or new address). I tried every other Mac address I could come up with: The cable router, the Wireless router's other Mac address, my PC's Mac address, etc. and none of them reported any location on the Skyhook page. So I am guessing that there is another Mac address, or some other bit of information that is used by Firefox when it reports to Google Maps my current location. Now that you have the back story, how do I find the Mac address or whatever information it is that Firefox (or other browsers) use to determine my Geolocation? Everything I have read online is rather vague. The next option I am considering is hooking a logging proxy onto Firefox and seeing what data it sends, but I'd rather find an easier method. Related: How do I update the geo location of my house?

  Read the article

• fail2ban Error Gentoo

  - by Mark Davidson

  Hi All I've recently setup a new VPS running Gentoo (My first time using the distro so please forgive me is this is a really easy one) and as I've done with other servers installed fail2ban. Setting it up to block the host via iptables, on too many unsuccessful logins with ssh. However I'm getting a strange error that I can't quite solve. When I start fail2ban I get these lines in the error log 2009-11-13 18:02:01,290 fail2ban.jail : INFO Jail 'ssh-iptables' started 2009-11-13 18:02:01,480 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 If I try and force a ban these errors show up in the log and the host is not banned 2009-11-13 11:23:26,905 fail2ban.actions: WARNING [ssh-iptables] Ban XXX.XXX.XXX.XXX 2009-11-13 11:23:26,929 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:26,930 fail2ban.actions.action: ERROR Invariant check failed. Trying to restore a sane environment 2009-11-13 11:23:27,007 fail2ban.actions.action: ERROR iptables -N fail2ban-SSH iptables -A fail2ban-SSH -j RETURN iptables -I INPUT -p tcp --dport ssh -j fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: ERROR iptables -n -L INPUT | grep -q fail2ban-SSH returned 100 2009-11-13 11:23:27,016 fail2ban.actions.action: CRITICAL Unable to restore environment My versions are as follows Linux masked 2.6.18-xen-r12 #2 SMP Wed Mar 4 11:45:03 GMT 2009 x86_64 Intel(R) Xeon(R) CPU E5504 @ 2.00GHz GenuineIntel GNU/Linux net-analyzer/fail2ban-0.8.4 net-firewall/iptables-1.4.3.2 If anyone could shead some light on these errors that would be great, I did wonder if it was a problem with iptables or some kernel modules but I can block an IP if I do. iptables -I INPUT -s 25.55.55.55 -j DROP so makes me think its something a bit more unusual. Thanks a lot in advance

  Read the article

• How to avoid intrusion detection/anti spoofing issue on a sonicwall TZ series FW

  - by Ian

  We have a sonicwall tz series FW with two internet service providers connected. One of the providers has a wireless service which works a bit like an ethernet switch in that we have an ip with a /24 subnet and the gateway is .1. All other clients on the same subnet (say 195.222.99.0) have the same .1 gateway - this is important, read on. Some of our clients are also on the same subnet. Our config: X0 : Lan X1 : 89.90.91.92 X2 : 195.222.99.252/24 (GW 195.222.99.1) X1 and X2 are not connected, other than both being connected to the public Internet. Client config: X1 : 195.222.99.123/24 (GW 195.222.99.1) What fails, what works: Traffic 195.222.99.123 (client) <- 89.90.91.92 (X1) : Spoof alert Traffic 195.222.99.123 (client) <- 195.222.99.252 (X1) : OK - no spoof alert I have several clients with IPs in the 195.222.99.0 range and all provoke identical alerts. This is the alert I see on the FW: Alert Intrusion Prevention IP spoof dropped 195.222.99.252, 21475, X1 89.90.91.92, 80, X1 MAC address: 00:12:ef:41:75:88 Anti-spoofing is switched off on my FW (network-mac-ip-anti-spoofing - config for each interface) for all ports I can provoke the alerts by telneting to a port on X1 from the clients. You can't argue with the logic - this is suspicious traffic. X1 is receiving traffic with a source IP which corresponds to X2s subnet. Anyone know how can I tell the FW that packets with a src subnet of 195.222.99.0 can legitimately appear on X1? I know whats going wrong, I've seen the same thing before, but with higher end FWs you can avoid this with a few extra rules. I can't see how to do this here. And before you ask why we're using this service provider - they give us 3ms (yep 3ms, thats not an error) delay between routers.

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast (Corvallis, OR) to the east coast (NY, NY). However, I am seeing some disturbing latency numbers from my location (Berkeley, CA) to the NYC host. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: Berkeley to NYC server: 215 ms latency, 46ms transfer time, 261ms total Berkeley to Corvallis server: 114ms latency, 41ms transfer time, 155ms total some URLs if you want to try yourself: http://careers.stackoverflow.com/content/cso/img/logo.png (NY, NY) http://serverfault.com/cache/logo.png (Corvallis, OR) It makes sense that Corvallis, OR is geographically closer to Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only went up 10%, yet the latency went up ten times as much! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... http://serverfault.com/questions/63531/does-routing-distance-affect-performance-significantly http://serverfault.com/questions/61719/how-does-geography-affect-network-latency http://serverfault.com/questions/6210/latency-in-internet-connections-from-europe-to-usa ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• administrator user unable to login, suspicious user accounts "sky$", "admin$"

  - by mks

  I have a Windows 2008 R2 Standard (64 bit) running in a virtual machine. Suddenly from yesterday onwards I am not able to login as administrator. Nobody changed the password. Both in the console as well as using remote desktop I am unable to login. Whenever I login as Administrator I am getting this error: "The user name or password is incorrect" Nothing has changed in the machine and I have logged in the past successfully both through console and via remote desktop several time on the same machine. One strange behaviour I noticed is, I am seeing some additional user accounts if I try to login as other user. The suspicious user account are: sky$ admin$ SUPPORT_388945a0 Is it created by some malware/virus? Or is it some windows hidden account? Microsoft site says that SUPPORT_388945a0 is: The Support_388945a0 account enables Help and Support Service interoperability with signed scripts. This account is primarily used to control access to signed scripts that are accessible from within Help and Support Services. Administrators can use this account to delegate the ability for an ordinary user, who does not have administrative access over a computer, to run signed scripts from links embedded within Help and Support Services. These scripts can be programmed to use the Support_388945a0 account credentials instead of the user’s credentials to perform specific administrative operations on the local computer that otherwise would not be supported by the ordinary user’s account. When the delegated user clicks on a link in Help and Support Services, the script executes under the security context of the Support_388945a0 account. This account has limited access to the computer and is disabled by default. However I am not sure from where this "admin$" and "sky$" came. Anyone has similar experience?

  Read the article

• Building new computer, turns on, but no post

  - by addybojangles

  Pardon my ignorance here, finally decided to put together a computer and egads. I purchased a new motherboard, power supply, processor, video card and memory. ASUS M4A79XTD EVO AM3 AMD 790X ATX AMD Motherboard OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Quad-Core Processor XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ (originally had links for you guys, but I lack the rep, sorry!!) And I've got it all in the tower. I put in power supply, installed processor on motherboard, installed heatsink, put in ram, and I am using an older IDE hard disk. When I start the computer, the monitor tells me "check signal cable." As far as I can tell, the heatsink on the processor is spinning, the power supply is on (obviously), and the green LED on the motherboard is on. I originally only had the bigger output plugged in to the motherboard (what I saw in a YouTube vid as well as the mobo instructions), but after doing some research, it said plug in the other ATX power supply. Which I did. And trying to power the computer results in nothing. No beeps on startup, no post, anyone have any ideas? Your ideas and help is greatly appreciated.

  Read the article

• IIS serving static content gives 503 at random

  - by Steffen

  We're having a few issues with our image server. It's a Win 2008 running IIS 7.5 and it only serves static content: images. It has run without issues for quite a while, until recently when we disabled Output Caching, as we noticed having it enabled meant it sent no-cache host-headers to the clients (forcing them to fetch the images from the server every time) We've read quite a bit about it, and it seems IIS just works that way - either you use Output Caching or you get to use cache host-headers. Anyway having disabled the Output Cache, we now experience random 5 minutes intervals, where all requests just get a 503 Service Unavailable. During this period the "Files cached" performance counter staggers (neither increased nor decreased) and after the period all caches are flushed. You might find it weird I talk about caching, since we disabled Output Caching. The thing is we changed the ObjectTTL parameter in registry, so we cache files for 3 minutes (which has worked very well, our Disk I/O dropped significantly) So even with Output Caching disabled, we're still caching plenty of files - if we could just get rid of the random 503 it'd be perfect :-D We don't get any messages in the Windows event log during these 503 intervals, so we're pretty stumped as to what to do. Any ideas are very welcome :-)

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• Where should CentOS users get /usr/share/virtio-win/drivers for virt-v2v?

  - by Philip Durbin

  I need to migrate a number of virtual machines from VMware ESX to CentOS 6 KVM hypervisors. Ultimately, I wrote an RPM spec file that solved my problem at https://github.com/fasrc/virtio-win/blob/master/virtio-win.spec but I'm not sure if there's another RPM in base CentOS or EPEL (something standard) I should be using instead. Originally, I was getting this "No root device found in this operating system image" error when attemting to migrate a Window 2008 VM. . . [root@kvm01b ~]# virt-v2v -ic 'esx://my-vmware-hypervisor.example.com/' \ -os transferimages --network default my-vm virt-v2v: No root device found in this operating system image. . . . but I solved this with a simply yum install libguestfs-winsupport since the docs say: If you attempt to convert a virtual machine using NTFS without the libguestfs-winsupport package installed, the conversion will fail. Next I got an error about missing drivers for Windows 2008. . . [root@kvm01b ~]# virt-v2v -ic 'esx://my-vmware-hypervisor.example.com/' \ -os transferimages --network default my-vm my-vm_my-vm: 100% [====================================]D virt-v2v: Installation failed because the following files referenced in the configuration file are required, but missing: /usr/share/virtio-win/drivers/amd64/Win2008 . . . and I resolved this by grabbing an iso from Fedora at http://alt.fedoraproject.org/pub/alt/virtio-win/latest/ as recommended by http://www.linux-kvm.org/page/WindowsGuestDrivers/Download_Drivers and building an RPM from it with this spec file: https://github.com/fasrc/virtio-win/blob/master/virtio-win.spec Now, virt-v2v exits without error: [root@kvm01b ~]# virt-v2v -ic 'esx://my-vmware-hypervisor.example.com/' \ -os transferimages --network default my-vm my-vm_my-vm: 100% [====================================]D virt-v2v: my-vm configured with virtio drivers. [root@kvm01b ~]# Now, my question is, rather that the virtio-win RPM from the spec file I wrote, is there some other more standard RPM in base CentOS or EPEL that will resolve the error above? Here's a bit more detail about my setup: [root@kvm01b ~]# cat /etc/redhat-release CentOS release 6.2 (Final) [root@kvm01b ~]# rpm -q virt-v2v virt-v2v-0.8.3-5.el6.x86_64 See also Bug 605334 – VirtIO driver for windows does not show specific OS: Windows 7, Windows 2003

  Read the article

• Server Performance

  - by sb12

  I know very little about performance tuning of servers etc... so i thought i'd put this up here as i start some research on it, just to get some direction. I am in the process of migrating from my old server to a new one - both are 64 bit machines. One is a few years old, the other brand new (PowerEdge R410). The old server spec is: 2 cpus, 3.4GHz Pentiums, 8G of RAM, Fedora 11 currently installed The new server spec is: 16 cpus, 3.2 GHz Xeon, 16G of RAM, CentOS 6.2 installed. Also RAID10 is on the new server - no RAID on the old one. Both servers currently have the same database (MySQL) with the same data migrated. I wrote a Perl script that simply steps through each row of a table in the database (about 18000 rows) and updates a value in that row. Every row in the table is updated. Out of curiosity i ran this perl script on both machines, just to see how the new server would perform vs. the old one, and it produced interesting results: The old server was twice as fast as the new one to complete. Looking at the database, both are configured exactly the same (the new one being a dump of the old one...)... Anyone any ideas why this would be given the hardware gap between both? As i said i'm about to start some digging, but thought i'd put this up here to maybe get some good direction.... Many thanks in advance..

  Read the article

< Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >