Search Results

Search found 19953 results on 799 pages for 'post get'.

Page 565/799 | < Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >

• SQLAuthority News – Download Whitepaper – SQL Server Analysis Services to Hive

  - by pinaldave

  The SQL Server Analysis Service is a very interesting subject and I always have enjoyed learning about it. You can read my earlier article over here. Big Data is my new interest and I have been exploring it recently. During this weekend this blog post caught my attention and I enjoyed reading it. Big Data is the next big thing. The growth is predicted to be 60% per year till 2016. There is no single solution to the growing need of the big data available in the market right now as well there is no one solution in the business intelligence eco-system available as well. However, the need of the solution is ever increasing. I am personally Klout user. You can see my Klout profile over. I do understand what Klout is trying to achieve – a single place to measure the influence of the person. However, it works a bit mysteriously. There are plenty of social media available currently in the internet world. The biggest problem all the social media faces is that everybody opens an account but hardly people logs back in. To overcome this issue and have returned visitors Klout has come up with the system where visitors can give 5/10 K+ to other users in a particular area. Looking at all the activities Klout is doing it is indeed big consumer of the Big Data as well it is early adopter of the big data and Hadoop based system.  Klout has to 1 trillion rows of data to be analyzed as well have nearly thousand terabyte warehouse. Hive the language used for Big Data supports Ad-Hoc Queries using HiveQL there are always better solutions. The alternate solution would be using SQL Server Analysis Services (SSAS) along with HiveQL. As there is no direct method to achieve there are few common workarounds already in place. A new ODBC driver from Klout has broken through the limitation and SQL Server Relation Engine can be used as an intermediate stage before SSAS. In this white paper the same solutions have been discussed in the depth. The white paper discusses following important concepts. The Klout Big Data solution Big Data Analytics based on Analysis Services Hadoop/Hive and Analysis Services integration Limitations of direct connectivity Pass-through queries to linked servers Best practices and lessons learned This white paper discussed all the important concepts which have enabled Klout to go go to the next level with all the offerings as well helped efficiency by offering a few out of the box solutions. I personally enjoy reading this white paper and I encourage all of you to do so. SQL Server Analysis Services to Hive Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, T SQL, Technology

  Read the article

• What can a Service do on Windows?

  - by Akemi Iwaya

  If you open up Task Manager or Process Explorer on your system, you will see many services running. But how much of an impact can a service have on your system, especially if it is ‘corrupted’ by malware? Today’s SuperUser Q&A post has the answers to a curious reader’s questions. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader Forivin wants to know how much impact a service can have on a Windows system, especially if it is ‘corrupted’ by malware: What kind malware/spyware could someone put into a service that does not have its own process on Windows? I mean services that use svchost.exe for example, like this: Could a service spy on my keyboard input? Take screenshots? Send and/or receive data over the internet? Infect other processes or files? Delete files? Kill processes? How much impact could a service have on a Windows installation? Are there any limits to what a malware ‘corrupted’ service could do? The Answer SuperUser contributor Keltari has the answer for us: What is a service? A service is an application, no more, no less. The advantage is that a service can run without a user session. This allows things like databases, backups, the ability to login, etc. to run when needed and without a user logged in. What is svchost? According to Microsoft: “svchost.exe is a generic host process name for services that run from dynamic-link libraries”. Could we have that in English please? Some time ago, Microsoft started moving all of the functionality from internal Windows services into .dll files instead of .exe files. From a programming perspective, this makes more sense for reusability…but the problem is that you can not launch a .dll file directly from Windows, it has to be loaded up from a running executable (exe). Thus the svchost.exe process was born. So, essentially a service which uses svchost is just calling a .dll and can do pretty much anything with the right credentials and/or permissions. If I remember correctly, there are viruses and other malware that do hide behind the svchost process, or name the executable svchost.exe to avoid detection. Have something to add to the explanation? Sound off in the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

  Read the article

• Unit Testing with NUnit and Moles Redux

  - by João Angelo

  Almost two years ago, when Moles was still being packaged alongside Pex, I wrote a post on how to run NUnit tests supporting moled types. A lot has changed since then and Moles is now being distributed independently of Pex, but maintaining support for integration with NUnit and other testing frameworks. For NUnit the support is provided by an addin class library (Microsoft.Moles.NUnit.dll) that you need to reference in your test project so that you can decorate yours tests with the MoledAttribute. The addin DLL must also be placed in the addins folder inside the NUnit installation directory. There is however a downside, since Moles and NUnit follow a different release cycle and the addin DLL must be built against a specific NUnit version, you may find that the release included with the latest version of Moles does not work with your version of NUnit. Fortunately the code for building the NUnit addin is supplied in the archive (moles.samples.zip) that you can found in the Documentation folder inside the Moles installation directory. By rebuilding the addin against your specific version of NUnit you are able to support any version. Also to note that in Moles 0.94.51023.0 the addin code did not support the use of TestCaseAttribute in your moled tests. However, if you need this support, you need to make just a couple of changes. Change the ITestDecorator.Decorate method in the MolesAddin class: Test ITestDecorator.Decorate(Test test, MemberInfo member) { SafeDebug.AssumeNotNull(test, "test"); SafeDebug.AssumeNotNull(member, "member"); bool isTestFixture = true; isTestFixture &= test.IsSuite; isTestFixture &= test.FixtureType != null; bool hasMoledAttribute = true; hasMoledAttribute &= !SafeArray.IsNullOrEmpty( member.GetCustomAttributes(typeof(MoledAttribute), false)); if (!isTestFixture && hasMoledAttribute) { return new MoledTest(test); } return test; } Change the Tests property in the MoledTest class: public override System.Collections.IList Tests { get { if (this.test.Tests == null) { return null; } var moled = new List<Test>(this.test.Tests.Count); foreach (var test in this.test.Tests) { moled.Add(new MoledTest((Test)test)); } return moled; } } Disclaimer: I only tested this implementation against NUnit 2.5.10.11092 version. Finally you just need to run the NUnit console runner through the Moles runner. A quick example follows: moles.runner.exe [Tests.dll] /r:nunit-console.exe /x86 /args:[NUnitArgument1] /args:[NUnitArgument2]

  Read the article

• RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

  - by hinkmond

  Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

  Read the article

• WPF Control Toolkits Comparison for LOB Apps

  In preparation for a new WPF project Ive been researching options for WPF Control toolkits.  While we want a lot of the benefits of WPF, the application is a fairly typical line of business application (LOB).  So were not focused on things like media and animations, but instead a simple, solid, intuitive, and modern user interface that allows for well architected separation of business logic and presentation layers. While WPF is mature, it hasnt lived the long life that Winforms has yet, so there is still a lot of room for third party and community control toolkits to fill the gaps between the controls that ship with the Framework.  There are two such gaps I was concerned about.  As this is an LOB app, we have needs for presenting lots of data and not surprisingly much of it is in grid format with the need for high performance, grouping, inline editing, aggregation, printing and exporting and things that weve been doing with LOB apps for a long time.  In addition we want a dashboard style for the UI in which the user can rearrange and shrink and grow tiles that house the content and functionality.  From a cost perspective, building these types of well performing controls from scratch doesnt make sense.  So I evaluated what you get from the .NET Framework along with a few different options for control toolkits.  I tried to be fairly thorough, but know that this isnt a detailed benchmarking comparison or intense evaluation.  Its just meant to be a feature set comparison to be used when thinking about building an LOB app in WPF.  I tried to list important feature differences and notes based on my experience with the trial versions and what I found in documentation and reference materials and samples.  Ive also listed the importance of the controls based on how I think they are needed in LOB apps.  There are several toolkits available, but given I dont have unlimited time, I picked just a few.  Maybe Ill add on more later.  The toolkits I compared are: Teleriks RadControls for WPF since I had heard some good things about Telerik Infragistics NetAdvantage WPF since both I and the customer have some experience with the vendors tools WPF Toolkit on codeplex since many of my colleagues have used it Blacklight codeplex project which had WPF support for the Tile View control  (with Release 4.3 WPF is not going to be supported in favor of focusing only on SilverLight controls, so I dropped that from the comparison) Click Here to Download the WPF Control Toolkits Comparison Hopefully this helps someone out there.  Feel free to post a comment on your experiences or if you think something I listed is incorrect or missing.  Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Forms&Reports upgrade characterset issues

  - by Lukasz Romaszewski

  Hello,This quick post is based on my findings during recent IMC workshops, especially those related to upgrading the Forms 6i/9i/10g applications to Forms 11g platform. The upgrade process itself is pretty straightforward and it basically requires recompiling your Forms application with a latest version of frmcmp tool. For some cases though, especially when you migrate from Forms 6i which is a client-server architecture to a 3-tier web solution (Forms 11g), you need to rewrite some parts of your code to make it run on new platform. The things you need to change range from reimplementing (using webutil library) typical client-site functionality like local IO operation, access to WinAPI, invoking DLLs etc. to changing deprecated or obsolete APIs like RUN_PRODUCT to RUN_REPORT_OBJECT. To automate those changes Oracle provides complete Java API  which allows you to manipulate the code and structure of you modules (JDAPI). To make it even easier we can use Forms Migration Assistant tool (written in Java using JDAPI) which is able to replace all occurrences of old API entries with their 11g equivalents or warn you when the replacement is not possible. You can also add your own replacement definitions in the search_replace.properties file. But you need to be aware of some issues that can be encountered using this tool. First of all if you are using some hard-coded text inside your triggers you may notice that after processing them by the Migration Assistant tool the national characters may be lost. This is due to the fact that you need to explicitly tell Java application (which MA really is) what kind of characterset it should use to read those text properly. In order to do that just add to a script calling MA the following line:  export JAVA_TOOL_OPTIONS=-Dfile.encoding=<JAVA_ISO_ENCODING>  when the particular encoding must match the NLS_LANG in your Forms Builder environment (for example for Polish characterset you need to use ISO-8859-2).Second issue you can encounter related to national charactersets is lack of national symbols in you reports after migration. This can be solved by adding appropriate NLS_LANG entry in your reports environment. Sometimes instead of particular characterset you see "Greek characters" in your reports. This is just default font used by reports engine instead of the one defined in your report. To solve it you must copy fonts definitions from your old environment (e.g. Forms 10g installation) to appropriate directory in new installation (usually AFM folder). For more information about this and other issues please refer to https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=1297012.1at My Oracle Support site. That's all for today, stay tuned for more posts on this topic! Lukasz

  Read the article

• New Slides - and a discussion about Dictionary Statistics

  - by Mike Dietrich

  First of all we have just upoaded a new version of the Upgrade and Migration Workshop slides with some added information. So please feel free to download them from here.The slides have one new interesting information which lead to a discussion I've had in the past days with a very large customer regarding their upgrades - and internally on the mailing list targeting an EBS database upgrade from Oracle 10.2 to Oracle 11.2. Why are we creating dictionary statistics during upgrade? I'd believe this forced dictionary statistics creation got introduced with the desupport of the Rule Based Optimizer in Oracle 10g. The goal: as RBO is not supported anymore we have to make sure that the data dictionary has fresh and non-stale statistics. Actually that would have led in Oracle 9i to strange behaviour in some databases - so in Oracle 9i this was strongly disrecommended. The upgrade scripts got hardcoded to create these stats. But during tests we had the following findings: It's important to create dictionary statistics the night before the upgrade. Not two weeks before, not 60 minutes before your downtime begins. But very close to the upgrade. From Oracle 10g onwards you'd just say: $ execute DBMS_STATS.GATHER_DICTIONARY_STATS; This is important to make sure you have fresh dictionary statistics during upgrade for performance reasons. Tests have shown that running an upgrade without valid dictionary statistics might slow down the whole upgrade by factors of 2x-3x. And it would be also a great idea post upgrade to create again fresh dictionary statistics when you've did suppress the stats creation during the upgrade process. Suppress? Yes, you could set this underscore parameter in the init.ora: _optim_dict_stats_at_db_cr_upg=FALSE to suppress the forced dictionary statistics collection during an upgrade. We believe strongly that (a) people using the default statistics creation process which will create dictionary statistics by default and (b) create fresh stats before upgrade on the dictionary. Therefore we find it save once you have followed our advice to use the underscore during upgrade. And we've taken out that forced statistics collection during upgrade in the next release of the database. Please note: If you are using the DBUA for the upgrade it will remove underscore parameters for the upgrade run to improve performance - which is generally a good idea. So you'll have to start the DBUA with that call: $ dbua -initParam "_optim_dict_stats_at_cb_cr_upg"=FALSE -Mike

  Read the article

• SQL Community – stronger than ever

  - by Rob Farley

  I posted a few hours ago about a reflection of the Summit, but I wanted to write another one for this month’s T-SQL Tuesday, hosted by Chris Yates. In January of this year, Adam Jorgensen and I joked around in a video that was used for the SQL Server 2012 launch. We were asked about SQLFamily, and we said how we were like brothers – how we could drive each other crazy (the look he gave me as I patted his stomach was priceless), but that we’d still look out for each other, just like in a real family. And this is really true. Last week at the PASS Summit, there was a lot going on. I was busy as always, as were many others. People told me their good news, their awful news, and some whinged to me about other people who were driving them crazy. But throughout this, people in the SQL Server community genuinely want the best for each other. I’m sure there are exceptions, but I don’t see much of this. Australians aren’t big on cheering for each other. Neither are the English. I think we see it as an American thing. It could be easy for me to consider that the SQL Community that I see at the PASS Summit is mainly there because it’s a primarily American organisation. But when you speak to people like sponsors, or people involved in several types of communities, you quickly hear that it’s not just about that – that PASS has something special. It goes beyond cheering, it’s a strong desire to see each other succeed. I see MVPs feel disappointed for those people who don’t get awarded. I see Summit speakers concerned for those who missed out on the chance to speak. I see chapter leaders excited about the opportunity to help other chapters. And throughout, I see a gentleness and love for people that you rarely see outside the church (and sadly, many churches don’t have it either). Chris points out that the M-W dictionary defined community as “a unified body of individuals”, and I feel like this is true of the SQL Server community. It goes deeper though. It’s not just unity – and we’re most definitely different to each other – it’s more than that. We all want to see each other grow. We all want to pull ourselves up, to serve each other, and to grow PASS into something more than it is today. In that other post of mine I wrote a bit about Paul White’s experience at his first Summit. His missus wrote to me on Facebook saying that she welled up over it. But that emotion was nothing about what I wrote – it was about the reaction that the SQL Community had had to Paul. Be proud of it, my SQL brothers and sisters, and never lose it.

  Read the article

• Determining cause of random latency and loading issues

  - by Sherwin Flight

  I'm not sure exactly what details to post in regards to my issue, because I'm not sure what is relevant. Prior to the end of September my websites all loaded quickly, in almost all cases. Loading time wasn't usually more than a few seconds. However, since the end of September I noticed a big increase in page loading times. In some cases pages were taking 30 seconds or more to load. I do have a remote monitoring service monitoring some of the sites as well, and the image below shows the response times over the past month. The response times shown at the beginning of this graph were what the usual response times were prior to this issue occurring. You can see that there has been a significant increase in response times from the beginning to the end of this graph. The thing is, the problem is not happening 100% of the time. If I click through the site, or even just keep refreshing the page, about 25% of the time the pages load quickly, the remaining 75% of the time they load slowly. Sometimes the pages take so long to load that they time out, and don't load at all. I have contacted my hosting provider, and they said things at their end was fine. I don't believe the problem is my home internet provider, because all other websites load without a problem. The server is located in Texas, USA. This also raises another interesting point. My remote monitor checks my site from two locations, California, USA, and London, England. As you can see in the chart below the response time is actually shorter when checked from London, which doesn't seem to make sense, since the server is physically closer to the California monitoring location. I would have expected the London monitoring location to have higher response times since they are physically farther away. I should also point out that in some traceroute test I've done it seem like the first connection to the server seems to take the longest, then after that the rest of the page loads quickly. Below is a little chart showing the times for the first connection to the server. So, what could be causing this problem, and what steps can I take to resolve it or at least narrow down the problem? Sending the request to the server was very quick, and receiving the reply back seems pretty quick, but the WAIT time is really long. So it connects, sends the request, but then waits close to 30 seconds before it starts receiving data back. I am also aware that there are things I can do to speed up page loading times, like reducing the number of CSS and JS files used on a page, compressing images, etc. This is not really what the source of the problem is though, because nothing has really changed on the site since before the problem started, and other sites on the same server are loading slowly as well.

  Read the article

• You're Invited to a TEAM Informatics Webinar

  - by Christie Flanagan

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following is a guest post by Wayne Boerger, Product Manager at TEAM Informatics, an Oracle partner. TEAM Informatics is a key Oracle partner in the WebCenter space. For the last 13 years, we have been constantly focused on adding value to your Oracle WebCenter investment and most recently, customers have been asking how they can take advantage of the Web Experience Management capabilities in WebCenter Sites.  TEAM is happy to announce the WebCenter Sites Connector, which allows you to continue to use WebCenter Content as your strategic enterprise repository for unstructured content while also using that content within the WebCenter Sites delivery model.  Taking advantage of both best-of-breed tools will supercharge your web marketing and streamline your workflow for getting you there.On Tuesday, March 27, TEAM is hosting a webinar to provide more details about why it’s a great time to move forward with WebCenter Sites and TEAM’s WebCenter Sites Connector.  Choose from one of two sessions to fit your schedule.  Hope to see you there!!Session 1 – March 27, 10 AM CDT/8 AM PDT – Register HERE.Session 2 – March 27, 5 PM CDT/ 3 PM PDT – Register HERE.

  Read the article

• Telesharp – An Application Repository for .NET applications

  - by cibrax

  A year ago, we released SO-Aware as our first product in Tellago Studios. SO-Aware represented a new way to manage web services and all the related artifacts like configuration, tests or monitoring data in the Microsoft stack. It was based on the idea of using a lightweight SOA governance approach with a central repository exposed through RESTful services. At that point, we thought the same idea could be extended to enterprise applications in general by providing a generic repository for many of the runtime or design time artifacts generated during the development like configuration, application description or topology (a high level view of the components that made up a system), logging information or binaries. It took us several months to give a form to that idea and implement it as a product, but it is finally here and I am very proud to announce the release today under the name of “TeleSharp”. Telesharp provides in a nutshell the following features, 1. Configure your application topology in a central repository. Application topology in this context means that you can decompose your application and describe it in terms of components and how they interact each other. For example, you can tell that the CRM system is made up of a couple of WCF services and a ASP.NET MVC front end. 2. Centralize configuration for your applications and components.  You can import existing .NET configuration sections into the repository and associate them to the different components. In addition, environment overrides are supported for the configuration sections. We provide tooling and extensions in Visual Studio for managing all the configuration, and a set of powershell commands for automating the configuration deployment. 3. Browse all the assemblies and types remotely in your application servers in a web browser using an interface similar to any of the existing .NET reflection tools. You can easily determine this way whether the server is running the correct version of your applications. 4. Centralize logging and exception management into the repository. You get different reports and a pivot viewer experience for browsing all the different logging information generated by your applications. In addition, TeleSharp provides different providers for pushing the logging information to the central repository using well-known frameworks like ELMAH, Log4Net, EntLib or even Windows ETW.  The central repository itself is implemented as a set of OData services that any application can easily consume using regular Http. You can read more details in this introductory post If you think this product can be a good fit in your organization, you can request a trial version in our Tellago Studios website.

  Read the article

• Token based Authentication and Claims for Restful Services

  - by Your DisplayName here!

  WIF as it exists today is optimized for web applications (passive/WS-Federation) and SOAP based services (active/WS-Trust). While there is limited support for WCF WebServiceHost based services (for standard credential types like Windows and Basic), there is no ready to use plumbing for RESTful services that do authentication based on tokens. This is not an oversight from the WIF team, but the REST services security world is currently rapidly changing – and that’s by design. There are a number of intermediate solutions, emerging protocols and token types, as well as some already deprecated ones. So it didn’t make sense to bake that into the core feature set of WIF. But after all, the F in WIF stands for Foundation. So just like the WIF APIs integrate tokens and claims into other hosts, this is also (easily) possible with RESTful services. Here’s how. HTTP Services and Authentication Unlike SOAP services, in the REST world there is no (over) specified security framework like WS-Security. Instead standard HTTP means are used to transmit credentials and SSL is used to secure the transport and data in transit. For most cases the HTTP Authorize header is used to transmit the security token (this can be as simple as a username/password up to issued tokens of some sort). The Authorize header consists of the actual credential (consider this opaque from a transport perspective) as well as a scheme. The scheme is some string that gives the service a hint what type of credential was used (e.g. Basic for basic authentication credentials). HTTP also includes a way to advertise the right credential type back to the client, for this the WWW-Authenticate response header is used. So for token based authentication, the service would simply need to read the incoming Authorization header, extract the token, parse and validate it. After the token has been validated, you also typically want some sort of client identity representation based on the incoming token. This is regardless of how technology-wise the actual service was built. In ASP.NET (MVC) you could use an HttpModule or an ActionFilter. In (todays) WCF, you would use the ServiceAuthorizationManager infrastructure. The nice thing about using WCF’ native extensibility points is that you get self-hosting for free. This is where WIF comes into play. WIF has ready to use infrastructure built-in that just need to be plugged into the corresponding hosting environment: Representation of identity based on claims. This is a very natural way of translating a security token (and again I mean this in the widest sense – could be also a username/password) into something our applications can work with. Infrastructure to convert tokens into claims (called security token handler) Claims transformation Claims-based authorization So much for the theory. In the next post I will show you how to implement that for WCF – including full source code and samples. (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• Recovering an Ubuntu installation - Ubuntu eats itself after 'sudo apt-get install -f'

  - by Tony Martin

  Updater (I assume) put a no entry style alert icon on the panel which informed me that certain package dependencies were not up to snuff. Upgrades were thereafter only partial. The dialogue advised that I sudo apt-get install -f. I did this hoping that app-get would fulfil dependencies and replace corrupted files and watched it systematically remove every component of linux, both the stuff I had installed and the core ubuntu packages. I could only assume at this stage that this was in preparation for a fresh install but, of course, I know better now - if you find yourself with apt-get warning you that you are about to remove several hundred packages and asking you to type an involved confirmation string seek advice before proceeding. I digress. This was a 64 bit install of 12.04. All that is left is grub pointing to a couple of windows recovery partitions on the hard drive. Thankfully the Ext4 partition is reachable from a stick boot. EDIT: I've logged onto the machine with a 64 bit stick and can see the file structure left behind by apt-get after {ahem} fixing. My first instinct was to run install from the stick but it seemed to want to do another install rather than a repair. My question then: is there a way to recover the current installation so that if I reinstall the packages I had they will pick up the original settings? I'm particularly worried about losing email from evolution - the rest I could probably lash back together. As for the use of PPA I'm not sure what you're driving at. I generally use Ubuntu Software Centre to install software, though I have used terminal scripts to add new repositories and software successfully following guidance on various websites. The most recent change I made was a downgrade of Wine in an attempt to install and run excel2007 (a necessity, I think, as I have VBA work to do). The installer had stalled and had to be killed. I wonder if that corrupted whatever database holds a model of the package installation structure. I would also be interested to know how this disaster came about. I see people in the know recommending the sudo apt-get install -f as a fairly innocuous cure in similar circumstances. Thanks for your attention, Tony Martin p.s. Do please forgive the rant aspects of the original post. It's hard to write rationally with a large hole in the pit of your stomach.

  Read the article

• Virtualized data centre&ndash;Part four: The design

  - by marc dekeyser

  Welcome back to the fourth post in this series! Today we will have a look at what Microsoft recommends as a “private cloud design” and what I will make of it. Whilst my own solution is based of the reference architecture, it is quite different indeed! An important thing to know is that, whilst I am using the private cloud as a reference, I am skipping most of the steps in designing a private cloud. If that is why you are here, please read the links at the end of the article and skim through my own content. A private cloud is much more process driven than just building a virtual infrastructure… The architecture of it all… So imagine for a minute that you have unlimited funds to build this lab of yours… You’d want redundancy on all levels and separation of each network where possible! Unfortunately we don’t have that luxury and, as you saw me hinting at in the previous article, our own design will be more limited but still quite capable! Networking From the networking perspective I will not have a fully redundant network, after all, this is but a lab environment! Thanks to Server 2012 I will be able to use bonding on my NIC’s and use LACP to improve the performance on that part. Storage As I mentioned in the previous article a Synology DS1218+ will be used for iSCSI provisioning. This device has 2 NICs on-board which can be bonded in to one 2 Gbps interface giving me a decent throughput and making the disks the most limiting factor in the storage design. Domain controllers and extra infrastructure Server 2012 completely supports running domain controllers virtualized and has no need to actually have a reachable DC when booting… That being said I need a remote access machine to power on the hosts (I have no need for them running 24/7) and a possible System Center VMM 2012 box (although server 2012 is not supported until SP1 :( ). Undecided on if I am to install those boxes separately or as a virtual machine… Which amounts to… Something like this pretty picture!                   Sources Microsoft Private Cloud Solutions Repository (en-US) http://social.technet.microsoft.com/wiki/contents/articles/12131.microsoft-private-cloud-solutions-repository-en-us.aspx Reference  Architecture: http://social.technet.microsoft.com/wiki/contents/articles/3819.reference-architecture-for-private-cloud.aspx Private Cloud Reference Model: http://social.technet.microsoft.com/wiki/contents/articles/4399.private-cloud-reference-model.aspx

  Read the article

• Cloud service and IM protocol advice, for a backend to group chat mobile app

  - by Jonathan

  Overview I’m going to develop an app on Android and iOS. It will allow users to set up group ‘chat rooms’ and talk on chat rooms set up by other users. The service needs to be highly scalable, such that it could accommodate a massive increase in users overnight (we can only dream). Chat requirements The chat protocol used should be flexible: it should allow me to determine who can view/post on ‘chat rooms’ based on certain other factors, as determined by the first poster/creator of the particular ‘chat room’. It should also allow for users to simply install the app and begin using the service, after only providing a simple nickname (which could be changed later). Chat protocol plans Having looked around I think the XMPP protocol is the best candidate. In particular the Multi-user chat extension looks like what I’ll need. Would this be most suited to my requirements, or do you know another potential solution? Cloud service I have been deciding between Amazon Web Services, Google App Engine and Windows Azure. I’m coming to the conclusion that Azure will be best, as it is easier to manage than AWS (ease of scalability will be a key factor in the design), I think it may be less restricted than GAE, plus Azure will soon have toolkits to allow easy interfacing with both Android and iOS phones. Is this the decision you would have made, or would you recommend/look into other cloud services? General project philosophy I have only recently started looking into this project’s feasibility, and am no expert on any of its aspects. So wherever possible I will leave the actual implementations to experts, i.e. choosing a higher-level cloud service, using a well-documented plugin of a, proven reliable, group chat protocol etc. My background I have some programming knowledge from a computer science degree. Main languages I’ve used have been Java and Python, but I don’t want this to affect design decisions for the project. The most appropriate languages for the task should be used, i.e. I don’t mind learning a lot of new skills (my current programming levels are relatively basic anyway). Thank you Thanks for reading, and any advice you have about any aspect would be greatly appreciated :-)

  Read the article

• I need to move an entity to the mouse location after i rightclick

  - by I.Hristov

  Well I've read the related questions-answers but still cant find a way to move my champion to the mouse position after a right-button mouse-click. I use this code at the top: float speed = (float)1/3; And this is in my void Update: //check if right mouse button is clicked if (mouse.RightButton == ButtonState.Released && previousButtonState == ButtonState.Pressed) { // gets the position of the mouse in mousePosition mousePosition = new Vector2(mouse.X, mouse.Y); //gets the current position of champion (the drawRectangle) currentChampionPosition = new Vector2(drawRectangle.X, drawRectangle.Y); // move champion to mouse position: //handles the case when the mouse position is really close to current position if (Math.Abs(currentChampionPosition.X - mousePosition.X) <= speed && Math.Abs(currentChampionPosition.Y - mousePosition.Y) <= speed) { drawRectangle.X = (int)mousePosition.X; drawRectangle.Y = (int)mousePosition.Y; } else if (currentChampionPosition != mousePosition) { drawRectangle.X += (int)((mousePosition.X - currentChampionPosition.X) * speed); drawRectangle.Y += (int)((mousePosition.Y - currentChampionPosition.Y) * speed); } } previousButtonState = mouse.RightButton; What that code does at the moment is on a click it brings the sprite 1/3 of the distance to the mouse but only once. How do I make it move consistently all the time? It seems I am not updating the sprite at all. EDIT I added the Vector2 as Nick said and with speed changed to 50 it should be OK. I tried it with if ButtonState.Pressed and it works while pressing the button. Thanks. However I wanted it to start moving when single mouse clicked. It should be moving until reaches the mousePosition. The Edit of Nick's post says to create another Vector2, But I already have the one called mousePosition. Not sure how to use another one. //gets a Vector2 direction to move *by Nick Wilson Vector2 direction = mousePosition - currentChampionPosition; //make the direction vector a unit vector direction.Normalize(); //multiply with speed (number of pixels) direction *= speed; // move champion to mouse position if (currentChampionPosition != mousePosition) { drawRectangle.X += (int)(direction.X); drawRectangle.Y += (int)(direction.Y); } } previousButtonState = mouse.RightButton;

  Read the article

• Test your internet connection - Emtel Mobile Internet

  After yesterday's report on Emtel Fixed Broadband (I'm still wondering where the 'fixed' part is), I did the same tests on Emtel Mobile Internet. For this I'm using the Huawei E169G HSDPA USB stick, connected to the same machine. Actually, this is my fail-safe internet connection and the system automatically switches between them if a problem, let's say timeout, etc. has been detected on the main line. For better comparison I used exactly the same servers on Speedtest.net. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 31.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Mobile Internet) Speedtest.net result of 31.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Mobile Internet) As you might easily see, there is a big difference in speed between national and international connections. More interestingly are the results related to the download and upload ratio. I'm not sure whether connections over Emtel Mobile Internet are asymmetric or symmetric like the Fixed Broadband. Might be interesting to find out. The first test result actually might give us a clue that the connection could be asymmetric with a ratio of 3:1 but again I'm not sure. I'll find out and post an update on this. It depends on network coverage Later today I was on tour with my tablet, a Samsung Galaxy Tab 10.1 (model GT-P7500) running on Android 4.0.4 (Ice Cream Sandwich), and did some more tests using the Speedtest.net app. The results are actually as expected and in areas with better network coverage you will get better results after all. At least, as long as you stay inside the national networks. For anything abroad, it doesn't really matter. But see for yourselves: Speedtest.net result of 31.05.2013 between Cascavelle and servers in Rose Hill, Mauritius (Emtel - Mobile Internet), Port Louis, Mauritius and Kuala Lumpur, Malaysia It's rather shocking and frustrating to see how the speed on international destinations goes down. And the full capability of the tablet's integrated modem (HSDPA: 21 Mbps; HSUPA: 5.76 Mbps) isn't used, too. I guess, this demands more tests in other areas of the island, like Ebene, Pailles or Port Louis. I'll keep you updated... The question remains: Alternatives? After the publication of the test results on Fixed Broadband I had some exchange with others on Facebook. Sadly, it seems that there are really no alternatives to what Emtel is offering at the moment. There are the various internet packages by Mauritius Telecom feat. Orange, like ADSL, MyT and Mobile Internet, and there is Bharat Telecom with their Bees offer which is currently limited to Ebene and parts of Quatre Bornes.

  Read the article

• 2011 - ALMs for your development team and the people they work with.

  - by David V. Corbin

  Welcome to 2011, it is already shaping up to be a very exciting year. The title of the post is not about charitable giving, although that is also a great topic. Application Lifecycle Management and the Systems that support the environment is, and 2011 will be a year where I expect many teams to invest heavily in this area. For those not familiar with ALM, it can be simplified down to "A comprehensive view of all of the iteas, requirements, activities and artifacts that impact an application over the course of its lifecycle, from concept until decommissioning". Obviously, this encompases a large number of different areas even for relatively small and medium sized projects. In recent years, many teams have adapted methodoligies which address individual aspects of this; but the majority of this adoption has resulted in "islands of improvement" rather than the desired comprehensive outcome...Until now! Last year Microsoft released Team Foundation Server 2010 along with Visual Studio 2010 Ultimate Edition, and with these two in combination the situation has drastically changed. At last there is a single environment that is capable of handling all aspects of ALM, and is also capable of dealing with migration and integration with existing systems to make the transition to a single solution much easier. Thse possibilities (and practicalities) are nothing short of amazing, Architecture thru Testing integration? YES. Being able to correlate specific requirement items (and their history) to actual code (and code history)? YES. Identification of which tests will be potentially impacted by a given code change? YES. Resiliant Automated Testing of User Interfaces? YES. Automatic Deployment Management? YES. Integraton Level testing as part of (designated) Builds? YES. I could easily double or triple the above list, but these items should be enough to get you thinking about the "pain points" your team and organization currently face and the fact that there IS a way to relieve the pain. Over the course of the year, I am hoping to bring together some of the "best of breed" information, along with hosting (and participating in) discussions with various experts in the field. There are already a number of groups (including many on LinkedIn) that have an ALM focus, and I encourage everyone out to check them out. I will be posting a list of the ones I find most helpful in the not too distant future. As I said at the beginning, 2011 is shaping up to be a very interesting (and productive) year. Why wait to start investigating and adopting ALM? ps: For those interested in becoming an "Alms Giver" in the charitable sense, I highly recommend checking out GiveCamp. A group of developers, designers and others get together to create a solution for a charity in just under 48 hours. I will be attending the GiveCamp in New York City on Jan 14-16, more information is available at nycgivecamp.org/

  Read the article

• Using INotifyPropertyChanged in background threads

  - by digitaldias

  Following up on a previous blog post where I exemplify databinding to objects, a reader was having some trouble with getting the UI to update. Here’s the rough UI: The idea is, when pressing Start, a background worker process starts ticking at the specified interval, then proceeds to increment the databound Elapsed value. The problem is that event propagation is limeted to current thread, meaning, you fire an event in one thread, then other threads of the same application will not catch it. The Code behind So, somewhere in my ViewModel, I have a corresponding bethod Start that initiates a background worker, for example: public void Start( ) { BackgroundWorker backgroundWorker = new BackgroundWorker( ); backgroundWorker.DoWork += IncrementTimerValue; backgroundWorker.RunWorkerAsync( ); } protected void IncrementTimerValue( object sender, DoWorkEventArgs e ) { do { if( this.ElapsedMs == 100 ) this.ElapsedMs = 0; else this.ElapsedMs++; }while( true ); } Assuming that there is a property: public int ElapsedMs { get { return _elapsedMs; } set { if( _elapsedMs == value ) return; _elapsedMs = value; NotifyThatPropertyChanged( "ElapsedMs" ); } } The above code will not work. If you step into this code in debug, you will find that INotifyPropertyChanged is called, but it does so in a different thread, and thus the UI never catches it, and does not update. One solution Knowing that the background thread updates the ElapsedMs member gives me a chance to activate BackgroundWorker class’ progress reporting mechanism to simply alert the main thread that something has happened, and that it is probably a good idea to refresh the ElapsedMs binding. public void Start( ) { BackgroundWorker backgroundWorker = new BackgroundWorker( ); backgroundWorker.DoWork += IncrementTimerValue; // Listen for progress report events backgroundWorker.WorkerReportsProgress = true; // Tell the UI that ElapsedMs needs to update backgroundWorker.RunWorkerCompleted += ( sender, e ) => { NotifyThatPropertyChanged( "ElapsedMs" ) }; backgroundWorker.RunWorkerAsync( ); } protected void IncrementTimerValue( object sender, DoWorkEventArgs e ) { do { if( this.ElapsedMs == 100 ) this.ElapsedMs = 0; else this.ElapsedMs++; // report any progress ( sender as BackgroundWorker ).ReportProgress( 0 ); }while( true ); } What happens above now is that I’ve used the BackgroundWorker cross thread mechanism to alert me of when it is ok for the UI to update it’s ElapsedMs field. Because the property itself is being updated in a different thread, I’m removing the NotifyThatPropertyChanged call from it’s Set method, and moving that responsability to the anonymous method that I created in the Start method. This is one way of solving the issue of having a background thread update your UI. I would be happy to hear of other cross-threading mechanisms for working in a MCP/MVC/MVVM pattern.

  Read the article

• Skyrim Creation Kit with Xbox 360

  - by funseiki

  I posted this on stackoverflow but was advised to post here (here is a link to the stackoverflow question). I'm hoping for constructive feedback on its plausibility. Update on progress: It looks like there are ways to stuff files back onto the console (horizon, modio, xplorer360, etc) and they do require some form of signing. As of now, though, I've had no luck. I was hoping I could get away with just placing the ".esp" into the directory containing marketplace downloads for Skyrim, along with the signed ".bsa" file (basically a zipped up file containing any extra content the .esp will need to refer that doesn't exist in the basic game). This doesn't work, at least not in the ways I've tried, so next I'm going to try install the entire game to my flash drive (if possible) and attempt to traverse through the game's directory (this is probably unlikely). If anyone else has suggestions or luck or wants more detail on my failures comment/answer away. Here is the question: I'm thinking about buying the PC version of Skyrim to get the Creation Kit (I already own a copy for the Xbox). I have read the faq and scoured plenty of forums to see if there was some way to mod Skyrim for a console (Xbox 360, in particular), but they are generally coming up negative. I realize the CreationKit is on the PC, but I was wondering if there was a way to set up the '.esp' (hopefully I'm interpreting this correctly) files to be placed on the Xbox 360 file system in a similar manner to how game add-ons are downloaded from the Xbox Live Marketplace. I believe it is possible to transfer saves between the console and the PC (e.g. google: 'skyrim mod xbox360'), but these are referencing items that already exist in the game (e.g. a console command for maximum carry weight does not require reference to new animations or models). It would probably be easier if one could navigate through the xbox's file system to see where the games' files are placed, but with the current setup, the file system is abstracted away. Any help or insight on the matter would be much appreciated. I would love to work on a project that would make it possible to let console gamers experience and enjoy all the great mods available to the PC community.

  Read the article

• Solution for developers wanting to run a standalone WLS 10.3.6 server against JDev 11.1.1.6.0

  - by Chris Muir

  In my previous post I discussed how to install the 11.1.1.6.0 ADF Runtimes into a standalone WLS 10.3.6 server by using the ADF Runtime installer, not the JDeveloper installer.  Yet there's still a problem for developers here because JDeveloper 11.1.1.6.0 comes coupled with a WLS 10.3.5 server.  What if you want to develop, deploy and test with a 10.3.6 server?  Have we lost the ability to integrate the IDE and the WLS server where we can run and stop the server, deploy our apps automatically the server and more? JDeveloper actually solved this issue sometime back but not many people will have recognized the feature for what it does as it wasn't needed until now. Via the Application Server Navigator you can create 2 types of connections, one to a remote "standalone WLS" and another to an "integrated WLS".  It's this second option that is useful because what we can do is install a local standalone WLS 10.3.6 server on our developer PC, then create a separate "integrated WLS" connection to the standalone server.  Then by accessing your Application's properties through the Application menu -> Application Properties -> Run -> Bind to Integration Application Server option we can choose the newly created WLS server connection to work with our application. In this way JDeveloper will now treat the new server as if it was the integrated WLS.  It will start when we run and deploy our applications, terminate it at request and so on.  Of course don't forget you still need to install the ADF Runtimes for the server to be able to work with ADF applications. Note there is bug 13917844 lurking in the Application Server Navigator for at least JDev 11.1.1.6.0 and earlier.  If you right click the new connection and select "Start Server Instance" it will often start one of the other existing connections instead (typically the original IntegratedWebLogicServer connection).  If you want to manually start the server you can bypass this by using the Run menu -> Start Server Instance option which works correctly.

  Read the article

• ArchBeat Link-o-Rama for 2012-10-11

  - by Bob Rhubart

  Whiteboards, not red carpets. OTN Architect Day Los Angeles. Oct 25. Free event. Yes, it's TinselTown, but the stars at this event are experts in the use of Oracle technologies in today's architectures. This free event includes a full slate of technical sessions and peer interaction covering cloud computing, SOA, and engineered systems—and lunch is on us. Register now. Thursday October 25, 2012, 8:00 a.m. – 5:00 p.m. Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048 JDeveloper extensions where? | Peter Paul van de Beek "Where does the downloaded stuff go after you installed JDeveloper extensions, like SOA Composite Editor, Oracle BPM Studio, or AIA Service Constructor?" Peter Paul van de Beek has the answer. Using Apache Derby Database with WebLogic (the express way) | Frank Munz Another technical how-to video from Dr. Frank Munz. Compensation Hello World | Ronald van Luttikhuizen Oracle ACE Director Ronald van Luttikhuizen's post addresses several question that came up during the "Effective Fault Handling in SOA Suite 11g" session that he and fellow Oracle ACE Guido Schmutz presented at Oracle OpenWorld. Oracle Fusion Middleware Security: OAM and OIM 11g Academies Looking for technical how-to content covering Oracle Access Manager and Oracle Identity Manager? The people behind the Oracle Middleware Security blog have indexed relevant blog posts into what they call "Academies." "These indexes," the blog explains, "contain the articles we've written that we believe provide long lasting guidance on OAM and OIM. Posts covered in these series include articles on key aspects of OAM and OIM 11g, best practice architectural guidance, integrations, and customizations." Maximum Availability Whitepaper for IDM 11gR2 | Oracle Fusion Middleware Security The Oracle Fusion Middelware A-Team shares an overview of and a link to a new white paper: "Identity Management 11.1.2 Enterprise Deployment Blueprint." Thought for the Day "The trouble with the world is that the stupid are sure and the intelligent are full of doubt." — Bertrand Russell (May 18, 1872 – February 2, 1970) Source: SoftwareQuotes.com

  Read the article

• WebAPI and MVC4 and OData

  - by Aligned

  I was looking closer into WebAPI, specificially how to use OData to avoid writing GetCustomerByCustomerId(int id) methods all over the place. I had problems just returning IQueryable<T> as some sites suggested in the WebpAPI (Assembly System.Web.Http.dll, v4.0.0.0).  I think things changed in the release version and the blog posts are still out of date. There is no [Queraable] as the answer to this question suggests. Once I get WebAPI.Odata Nuget package, and added the [Queryable] to the method http://localhost:57146/api/values/?$filter=Id%20eq%201 worked (don’t forget the ‘$’). Now the main question is whether I should do this and how to stop logged in users from sniffing the url and getting data for other users. I John V. Peterson has a post on securing WebAPI with headers and intercepting the call at that point. He had an update to use HttpMessageHandlers instead. I think I’ll use this to force the call to contain some kind of unique code for the user, but I’m still thinking about this. I will not expose this to the public, just to my calls with-in my Forms Authentication areas. Other links: http://robbincremers.me/2012/02/16/building-and-consuming-rest-services-with-asp-net-web-api-and-odata-support/ ~lots of good information John V Peterson example: https://github.com/johnvpetersen/ASPWebAPIExample ~ all data access goes through the WebApi and the web client doesn’t have a connection string ~ There is code library for calling the WebApi from MVC using the HttpClient. It’s a great starting point http://blogs.msdn.com/b/alexj/archive/2012/08/15/odata-support-in-asp-net-web-api.aspx ~ Beta (9/18/2012) Nuget package to help with what I want to do? ~ has a sample code project with examples http://blogs.msdn.com/b/alexj/archive/2012/08/15/odata-support-in-asp-net-web-api.aspx http://blogs.msdn.com/b/alexj/archive/2012/08/21/web-api-queryable-current-support-and-tentative-roadmap.aspx http://stackoverflow.com/questions/10885868/asp-net-mvc4-rc-web-api-odata-filter-not-working-with-iqueryable JSON, pass the correct format in the header (Accept: application/json). $format=JSON doesn’t appear to be working. Async methods built into WebApi! Look for the GetAsync methods.

  Read the article

• TFS Hosting: discountasp.net TFS

  - by Enrique Lima

  In the last month or so I have been able to test and experience first hand the offering from discountasp.net for hosted TFS 2010. This first part is a description of the setup process for the account itself and getting some additional information on what you will find through the portal on their site. Not long ago, I posted a little tidbit on hosting TFS.  Through it I also did a shameless plug to my employer, our services and the type of hosting we recommend.  So, wouldn’t me running on discountasp.net be an issue?  Actually? NO. Ok, enough rambling.  Let’s get some details here. It is a Software as a Service model.  Through it we get Source Control, Version Control, Work Item Tracking and such.  What about Build?  If your need includes Build Management and such, you may need to look at some other options.  But, still this is a great offering for those that are moving from SourceSafe.  Or organizations who have 3 to 5 developers on staff, and do not foresee getting larger anytime soon.  Can it support more than 5 developers?  Yes, but then we need to get into how are you using TFS.  Do you need more than just Basic?  For example, SharePoint and Reporting Services integration. The signup process was seamless! Very easy to follow, complete and transition to Visual Studio to start working. An email followed the signup process, it contained details on how to get to the Team Foundation Server Control Panel login.  Once there, here is what I saw after the initial setup process of naming my Team Project Collection: So, moving on … once I clicked the area to get my server info, I got the following: Then it was a matter of getting the first user in there: Then on to connecting Visual Studio to my hosted TFS. Getting the server information, and the user account created I will configure those options in Visual Studio. Using Team Explorer, I am adding a new server configuration. Once this is provided, click OK, I will be challenged for a username and password, provide them and you will land on the following screen. Then Click Close. You will now be connected to your server and Team Project Collection. Since this will likely be the first time connecting, you will have no Projects (I already have 2 going). Click Connect, and you will be back in Team Explorer. My next post in the topic will be on Creating your First Team Project and uploading a Project Template to the server.

  Read the article

• Random thoughts on Monday

  - by user10760339

  I know that it has been a long time since my last post, just though that I would update you my latest thoughts of Governance. I just recently completed an executive round table series on EA and Cloud in Singapore, Indonesia and Malaysia. The response was phenomenal. The key point of the session was that Enterprise is the key enabler of innovation - All companies want to drive to be market leaders, EA can lay the foundation for the path to deliver that at innovation. When it comes to innovation, I see two distinct types: (a) Passive innovation is where a company creates innovation thought increments improvement over time. A great example is when airlines went from paper tickets to electronic ticket. Next logical progression is to do the same with boarding passes. There are a lot of examples to choose from, thought the thing to keep in mind, is that passive innovation will only keep you in the lead, it won’t allow you to create new markets or jump from #3 to #1 in one go. For that we need another type of innovation. (b) Disruptive innovation is where you create market where none existed before. Thought very difficult to do and requires significant investment in research, product and software development and not least of all, visionary thinking and timing, if done correctly, can turn the world on it’s ear. A great example is Apple iTunes. Some might say that this is incremental innovation, but only in one aspect, the downloading of music. Other then that, it’s all disruptive innovation. Being able to buy a single song rather then the album fundamentally changed the way we get out music. Behind all of these types of innovation is Enterprise Architecture. EA creates the infrastructure foundation, then delivery systems and the end-user experience to deliver this innovation. At Oracle, we are driving that EA innovation with our private cloud offerings from “bolt-to-glass” as I like to say. For more on what Oracle has to offer in EA and cloud, have a look at Cloud Computing | Oracle and Enterprise Architecture - OracleI am working on new material that I will be posting in a couple of weeks, so check back regularly for new updates or feel free to subscript for updates.

  Read the article

< Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >