protected mode - Page 567

How to Use RDA to Generate WLS Thread Dumps At Specified Intervals?

- by Daniel Mortimer

Introduction There are many ways to generate a thread dump of a WebLogic Managed Server. For example, take a look at: Taking Thread Dumps - [an excellent blog post on the Middleware Magic site]or Different ways to take thread dumps in WebLogic Server (Document 1098691.1) There is another method - use Remote Diagnostic Agent! The solution described below is not documented, but it is relatively straightforward to execute. One advantage of using RDA to collect the thread dumps is RDA will also collect configuration, log files, network, system, performance information at the same time. Instructions 1. Not familiar with Remote Diagnostic Agent? Take a look at my previous blog "Resolve SRs Faster Using RDA - Find the Right Profile" 2. Choose a profile, which includes the WebLogic Server data collection modules (for example the profile "WebLogicServer"). At RDA setup time you should see the prompt below: ------------------------------------------------------------------------------- S301WLS: Collects Oracle WebLogic Server Information ------------------------------------------------------------------------------- Enter the location of the directory where the domains to analyze are located (For example in UNIX, <BEA Home>/user_projects/domains or <Middleware Home>/user_projects/domains) Hit 'Return' to accept the default (/oracle/11AS/Middleware/user_projects/domains) > For a successful WLS connection, ensure that the domain Admin Server is up and running. Data Collection Type: 1 Collect for a single server (offline mode) 2 Collect for a single server (using WLS connection) 3 Collect for multiple servers (using WLS connection) Enter the item number Hit 'Return' to accept the default (1) > 2 Choose option 2 or 3. Note: Collect for a single server or multiple servers using WLS connection means that RDA will attempt to connect to execute online WLST commands against the targeted server(s). The thread dumps are collected using the WLST function - "threadDumps()". If WLST cannot connect to the managed server, RDA will proceed to collect other data and ignore the request to collect thread dumps. If in the final output you see no Thread Dump menu item, then it's likely that the managed server is in a state which prevents new connections to it. If faced with this scenario, you would have to employ alternative methods for collecting thread dumps. 3. The RDA setup will create a setup.cfg file in the RDA_HOME directory. Open this file in an editor. You will find the following parameters which govern the number of thread dumps and thread dump interval. #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=5000 The example lines above show the default settings. In other words, RDA will collect 10 thread dumps at 5000 millisecond (5 second) intervals. You may want to change this to something like: #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=30000 However, bear in mind, that such change will increase the total amount of time it takes for RDA to complete its run. 4. Once you are happy with the setup.cfg, run RDA. RDA will collect, render, generate and package all files in the output directory. 5. For ease of viewing, open up the RDA Start html file - "xxxx__start.htm". The thread dumps can be found under the WLST Collections for the target managed server(s). See screenshots belowScreenshot 1:RDA Start Page - Main Index Screenshot 2: Managed Server Sub Index Screenshot 3: WLST Collections Screenshot 4: Thread Dump Page - List of dump file links Screenshot 5: Thread Dump Dat File Link Additional Comment: A) You can view the thread dump files within the RDA Start Page framework, but most likely you will want to download the dat files for in-depth analysis via thread dump analysis tools such as: Thread Dump Analyzer - Samurai - a GUI based tail , thread dump analysis tool If you are new to thread dump analysis - take a look at this recorded Support Advisor Webcast Oracle WebLogic Server: Diagnosing Performance Issues through Java Thread Dumps[Slidedeck from webcast in PDF format]B) I have logged a couple of enhancement requests for the RDA Development Team to consider: Add timestamp to dump file links, dat filename and at the top of the body of the dat file Package the individual thread dumps in a zip so all dump files can be conveniently downloaded in one go.

Read the article

Common usecases and techniques when integrating a 3rd party application with Oracle Sales Cloud

- by asantaga

Over the last year or so I've see a lot of partners migrating and integrate their applications with Oracle Sales Cloud. Interestingly I'd say 60% of the partners use the same set of design patterns over and over again. Most of the time I see that they want to embed their application into Oracle Sales Cloud, within a tab usually, perhaps click on a link to their application (passing some piece of data + credentials) and then within their application update sales cloud again using webservices. Here are some examples of the different use-cases I've seen , and how partners are embedding their applications into Sales Cloud, NB : The following examples use the "Desktop" User Interface rather than the Newer "Simplified User Interface", I'll update the sample application soon but the integration patterns are precisely the same Use Case 1 : Navigator "Link out" to third party application This is an example of where the developer has added a link to the global navigator and this links out to the 3rd Party Application. Typically one doesn't pass any contextual data with the exception of perhaps user credentials, or better still JWT Token. Techniques Used Adding Link to Menu Item Using JWT Token in Sales Cloud Use Case 2 : Application Embedded within the Sales Cloud Dashboard Within the Oracle Sales Cloud application there is a tab called "Sales", within this tab its possible to embed a SubTab and embed a iFrame pointing to your application. To do this the developer simply needs to edit the page in customization mode, add the tab and then add the iFrame, simples! The developer can pass credentials/JWT Token and some other pieces of data but not object data (ie the current OpportunityID etc) Techniques Used Adding a page to the dashboard Using JWT Token in Sales Cloud Use Case 3 : Embedding a Tab and Context Linking out from a Sales Cloud object to the 3rd party application In this usecase the developer embeds two components into Oracle Sales Cloud. The first is a SubTab showing summary data to the user (a quote in our case) and then secondly a hyperlink, (although it could be a button) which when clicked navigates the user to the 3rd party application. In this case the developer almost always passes context specific data (i.e. the opportunityId) and a security token (username password combo or JWT Token). The third party application usually takes the data, perhaps queries more data using the Sales Cloud SOAP/WebService interface and then displays the resulting mashup to the user for further processing. When the user has finished their work in the 3rd party application they normally navigate back to Oracle Sales Cloud using what's called a "DeepLink", ie taking them back to the object [opportunity in our case] they came from. This image visually shows a "Happy Path" a user may follow, and combines linking out to an application , webservice calls and deep linking back to Sales Cloud. Techniques Used Extending a SalesCloud application with a custom button Using JWT Token in Sales Cloud Extending Oracle Sales Cloud [Opportnity] with a custom tab exposing External Content Retrieving Data from Oracle Sales cloud using WebServices Coding some groovy script to generate the URLs required (Doc 1571200.1 on MyOracle Support) DeepLinking to specific Oracle Sales Cloud Pages (Doc 1516151.1 on My Oracle Support) Use-Case 4 : Server Side processing/synchronization This usecase focuses on the Server Side processing of data, in this case synchronizing data. Here the 3rd party application is running on a "timer", e.g. cron or similar, and when triggered it queries data from Oracle Sales Cloud, then it queries data from the 3rd party application, determines the deltas and then inserts the data where required. Specifically here we are calling Oracle Sales Cloud using SOAP/WebServices and the 3rd party application is being communicated to using the REST API, for Oracle Sales Cloud one would use standard JAX-WS WebService calls and for REST one would use the JAX-RS api and perhap the Jackson api for managing JSON objects.. This is a very common use case and one which specifically lends itself to using the Oracle Java Cloud Service as the ideal application server where to host the mediator between the two applications. Techniques Used Using JWT Token in Sales Cloud Integrating with the Oracle Java Cloud Service Retrieving Data from Oracle Sales cloud using WebServices General Resources The above is just a small set of techniques and use-cases which are used today. There are plenty of other sources of documentation and resources available on the internet but to get you started here are a few of my favourite places Sales Cloud General Documentation Sales Cloud Customize Tab is useful for general customization of Sales Cloud Sales Cloud Integration Tab focuses on the 3rd party integration techniques Official Oracle Fusion Developer Relations Blog Official Oracle Fusion Developer Relations YouTube Channel Enjoy integrating!

Read the article

ASP.NET WebAPI Security 3: Extensible Authentication Framework

- by Your DisplayName here!

In my last post, I described the identity architecture of ASP.NET Web API. The short version was, that Web API (beta 1) does not really have an authentication system on its own, but inherits the client security context from its host. This is fine in many situations (e.g. AJAX style callbacks with an already established logon session). But there are many cases where you don’t use the containing web application for authentication, but need to do it yourself. Examples of that would be token based authentication and clients that don’t run in the context of the web application (e.g. desktop clients / mobile). Since Web API provides a nice extensibility model, it is easy to implement whatever security framework you want on top of it. My design goals were: Easy to use. Extensible. Claims-based. ..and of course, this should always behave the same, regardless of the hosting environment. In the rest of the post I am outlining some of the bits and pieces, So you know what you are dealing with, in case you want to try the code. At the very heart… is a so called message handler. This is a Web API extensibility point that gets to see (and modify if needed) all incoming and outgoing requests. Handlers run after the conversion from host to Web API, which means that handler code deals with HttpRequestMessage and HttpResponseMessage. See Pedro’s post for more information on the processing pipeline. This handler requires a configuration object for initialization. Currently this is very simple, it contains: Settings for the various authentication and credential types Settings for claims transformation Ability to block identity inheritance from host The most important part here is the credential type support, but I will come back to that later. The logic of the message handler is simple: Look at the incoming request. If the request contains an authorization header, try to authenticate the client. If this is successful, create a claims principal and populate the usual places. If not, return a 401 status code and set the Www-Authenticate header. Look at outgoing response, if the status code is 401, set the Www-Authenticate header. Credential type support Under the covers I use the WIF security token handler infrastructure to validate credentials and to turn security tokens into claims. The idea is simple: an authorization header consists of two pieces: the schema and the actual “token”. My configuration object allows to associate a security token handler with a scheme. This way you only need to implement support for a specific credential type, and map that to the incoming scheme value. The current version supports HTTP Basic Authentication as well as SAML and SWT tokens. (I needed to do some surgery on the standard security token handlers, since WIF does not directly support string-ified tokens. The next version of .NET will fix that, and the code should become simpler then). You can e.g. use this code to hook up a username/password handler to the Basic scheme (the default scheme name for Basic Authentication). config.Handler.AddBasicAuthenticationHandler( (username, password) => username == password); You simply have to provide a password validation function which could of course point back to your existing password library or e.g. membership. The following code maps a token handler for Simple Web Tokens (SWT) to the Bearer scheme (the currently favoured scheme name for OAuth2). You simply have to specify the issuer name, realm and shared signature key: config.Handler.AddSimpleWebTokenHandler( "Bearer", http://identity.thinktecture.com/trust, Constants.Realm, "Dc9Mpi3jaaaUpBQpa/4R7XtUsa3D/ALSjTVvK8IUZbg="); For certain integration scenarios it is very useful if your Web API can consume SAML tokens. This is also easily accomplishable. The following code uses the standard WIF API to configure the usual SAMLisms like issuer, audience, service certificate and certificate validation. Both SAML 1.1 and 2.0 are supported. var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri(Constants.Realm)); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from configuration section) adfsConfig.ServiceTokenResolver = FederatedAuthentication.ServiceConfiguration.CreateAggregateTokenResolver(); config.Handler.AddSaml11SecurityTokenHandler("SAML", adfsConfig); Claims Transformation After successful authentication, if configured, the standard WIF ClaimsAuthenticationManager is called to run claims transformation and validation logic. This stage is used to transform the “technical” claims from the security token into application claims. You can either have a separate transformation logic, or share on e.g. with the containing web application. That’s just a matter of configuration. Adding the authentication handler to a Web API application In the spirit of Web API this is done in code, e.g. global.asax for web hosting: protected void Application_Start() { AreaRegistration.RegisterAllAreas(); ConfigureApis(GlobalConfiguration.Configuration); RegisterGlobalFilters(GlobalFilters.Filters); RegisterRoutes(RouteTable.Routes); BundleTable.Bundles.RegisterTemplateBundles(); } private void ConfigureApis(HttpConfiguration configuration) { configuration.MessageHandlers.Add( new AuthenticationHandler(ConfigureAuthentication())); } private AuthenticationConfiguration ConfigureAuthentication() { var config = new AuthenticationConfiguration { // sample claims transformation for consultants sample, comment out to see raw claims ClaimsAuthenticationManager = new ApiClaimsTransformer(), // value of the www-authenticate header, // if not set, the first scheme added to the handler collection is used DefaultAuthenticationScheme = "Basic" }; // add token handlers - see above return config; } You can find the full source code and some samples here. In the next post I will describe some of the samples in the download, and then move on to authorization. HTH

Read the article

How to use ULS in SharePoint 2010 for Custom Code Exception Logging?

- by venkatx5

What is ULS in SharePoint 2010? ULS stands for Unified Logging Service which captures and writes Exceptions/Logs in Log File(A Plain Text File with .log extension). SharePoint logs Each and every exceptions with ULS. SharePoint Administrators should know ULS and it's very useful when anything goes wrong. but when you ask any SharePoint 2007 Administrator to check log file then most of them will Kill you. Because read and understand the log file is not so easy. Imagine open a plain text file of 20 MB in NotePad and go thru line by line. Now Microsoft developed a tool "ULS Viewer" to view those Log files in easily readable format. This tools also helps to filter events based on exception priority. You can read on this blog to know in details about ULS Viewer . Where to get ULS Viewer? ULS Viewer is developed by Microsoft and available to download for free. URL : http://code.msdn.microsoft.com/ULSViewer/Release/ProjectReleases.aspx?ReleaseId=3308 Note: Eventhought this tool developed by Microsoft, it's not supported by Microsoft. Means you can't support for this tool from Microsoft and use it on your own Risk. By the way what's the risk in viewing Log Files?! How to use ULS in SharePoint 2010 Custom Code? ULS can be extended to use in user solutions to log exceptions. In Detail, Developer can use ULS to log his own application errors and exceptions on SharePoint Log files. So now all in Single Place (That's why it's called "Unified Logging"). Well in this article I am going to use Waldek's Code (Reference Link). However the article is core and am writing container for that (Basically how to implement the code in Detail). Let's see the steps. Open Visual Studio 2010 -> File -> New Project -> Visual C# -> Windows -> Class Library -> Name : ULSLogger (Make sure you've selected .net Framework 3.5) In Solution Explorer Panel, Rename the Class1.cs to LoggingService.cs Right Click on References -> Add Reference -> Under .Net tab select "Microsoft.SharePoint" Right Click on the Project -> Properties. Select "Signing" Tab -> Check "Sign the Assembly". In the below drop down select <New> and enter "ULSLogger", uncheck the "Protect my key with a Password" option. Now copy the below code and paste. (Or Just refer.. :-) ) using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.SharePoint; using Microsoft.SharePoint.Administration; using System.Runtime.InteropServices; namespace ULSLogger { public class LoggingService : SPDiagnosticsServiceBase { public static string vsDiagnosticAreaName = "Venkats SharePoint Logging Service"; public static string CategoryName = "vsProject"; public static uint uintEventID = 700; // Event ID private static LoggingService _Current; public static LoggingService Current { get { if (_Current == null) { _Current = new LoggingService(); } return _Current; } }private LoggingService() : base("Venkats SharePoint Logging Service", SPFarm.Local) {}protected override IEnumerable<SPDiagnosticsArea> ProvideAreas() { List<SPDiagnosticsArea> areas = new List<SPDiagnosticsArea> { new SPDiagnosticsArea(vsDiagnosticAreaName, new List<SPDiagnosticsCategory> { new SPDiagnosticsCategory(CategoryName, TraceSeverity.Medium, EventSeverity.Error) }) }; return areas; }public static string LogErrorInULS(string errorMessage) { string strExecutionResult = "Message Not Logged in ULS. "; try { SPDiagnosticsCategory category = LoggingService.Current.Areas[vsDiagnosticAreaName].Categories[CategoryName]; LoggingService.Current.WriteTrace(uintEventID, category, TraceSeverity.Unexpected, errorMessage); strExecutionResult = "Message Logged"; } catch (Exception ex) { strExecutionResult += ex.Message; } return strExecutionResult; }public static string LogErrorInULS(string errorMessage, TraceSeverity tsSeverity) { string strExecutionResult = "Message Not Logged in ULS. "; try { SPDiagnosticsCategory category = LoggingService.Current.Areas[vsDiagnosticAreaName].Categories[CategoryName]; LoggingService.Current.WriteTrace(uintEventID, category, tsSeverity, errorMessage); strExecutionResult = "Message Logged"; } catch (Exception ex) { strExecutionResult += ex.Message; } return strExecutionResult; } } } Just build the solution and it's ready to use now. This ULS solution can be used in SharePoint Webparts or Console Application. Lets see how to use it in a Console Application. SharePoint Server 2010 must be installed in the same Server or the application must be hosted in SharPoint Server 2010 environment. The console application must be set to "x64" Platform target. Create a New Console Application. (Visual Studio -> File -> New Project -> C# -> Windows -> Console Application) Right Click on References -> Add Reference -> Under .Net tab select "Microsoft.SharePoint" Open Program.cs add "using Microsoft.SharePoint.Administration;" Right Click on References -> Add Reference -> Under "Browse" tab select the "ULSLogger.dll" which we created first. (Path : ULSLogger\ULSLogger\bin\Debug\) Right Click on Project -> Properties -> Select "Build" Tab -> Under "Platform Target" option select "x64". Open the Program.cs and paste the below code. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.SharePoint.Administration; using ULSLogger; namespace ULSLoggerClient { class Program { static void Main(string[] args) { Console.WriteLine("ULS Logging Started."); string strResult = LoggingService.LogErrorInULS("My Application is Working Fine."); Console.WriteLine("ULS Logging Info. Result : " + strResult); string strResult = LoggingService.LogErrorInULS("My Application got an Exception.", TraceSeverity.High); Console.WriteLine("ULS Logging Waring Result : " + strResult); Console.WriteLine("ULS Logging Completed."); Console.ReadLine(); } } } Just build the solution and execute. It'll log the message on the log file. Make sure you are using Farm Administrator User ID. You can play with Message and TraceSeverity as required. Now Open ULS Viewer -> File -> Open From -> ULS -> Select First Option to open the default ULS Log. It's Uls RealTime and will show all log entries in readable table format. Right Click on a row and select "Filter By This Item". Select "Event ID" and enter value "700" that we used in the application. Click Ok and now you'll see the Exceptions/Logs which logged by our application. If you want to see High Priority Messages only then Click Icons except Red Cross Icon on the Toolbar. The tooltip will tell what's the icons used for.

Read the article

LIMBO fails on startup with Internal errors - invalid parameters received

- by user61262

I installed LIMBO from the Humble Bundle V and as far as I am aware, this has wine packaged with it (I also installed the latest from the repo's in case is was because of that). However the game doesn't even start and fails with the message: Wine Program Error Internal errors - invalid parameters received. Is there a way to log the error or does anyone know why this happens? This question was asked previously but it seems to have disappeared. My Graphics cards is a Geforece GT 250 Cheers ice. [edit: Wine outputs the following error: wine /opt/limbo/support/limbo/drive_c/Program\ Files/limbo/limbo.exe fixme:system:SystemParametersInfoW Unimplemented action: 59 (SPI_SETSTICKYKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 53 (SPI_SETTOGGLEKEYS) fixme:system:SystemParametersInfoW Unimplemented action: 51 (SPI_SETFILTERKEYS) fixme:win:EnumDisplayDevicesW ((null),0,0x32f580,0x00000000), stub! err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 1920x1080x32 @60! (XRandR) err:xrandr:X11DRV_XRandR_SetCurrentMode Resolution change not successful -- perhaps display has changed? wine: Unhandled page fault on read access to 0x00000000 at address 0x48213e (thread 0009), starting debugger... The debugger has the following output: Unhandled exception: page fault on read access to 0x00000000 in 32-bit code (0x0048213e). Register dump: CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b EIP:0048213e ESP:0032f9f4 EBP:0037cdd0 EFLAGS:00010202( R- -- I - - - ) EAX:00000000 EBX:00000000 ECX:00000000 EDX:0037cf4c ESI:0037cda8 EDI:0037cdcc Stack dump: 0x0032f9f4: 0037cda8 0034c708 7bc35120 00000000 0x0032fa04: 0037cda8 0032fa38 0079fc58 00000000 0x0032fa14: 0048b7d4 00000001 0037cdcc 00000001 0x0032fa24: 00000780 00000438 0034c620 00000000 0x0032fa34: 0034c708 0032fa78 007a04e2 00000002 0x0032fa44: 0048c4bc 00000780 00000438 0037cda8 Backtrace: =>0 0x0048213e in limbo (+0x8213e) (0x0037cdd0) 0x0048213e: movl 0x0(%eax),%edx Modules: Module Address Debug info Name (103 modules) PE 400000- 926000 Export limbo PE 10000000-101ff000 Deferred d3dx9_43 ELF 79bb3000-7b800000 Deferred libnvidia-glcore.so.295.53 ELF 7b800000-7ba15000 Deferred kernel32<elf> \-PE 7b810000-7ba15000 \ kernel32 ELF 7bc00000-7bcc3000 Deferred ntdll<elf> \-PE 7bc10000-7bcc3000 \ ntdll ELF 7bf00000-7bf04000 Deferred <wine-loader> ELF 7d7e0000-7d7e4000 Deferred libnvidia-tls.so.295.53 ELF 7d7e4000-7d8bc000 Deferred libgl.so.1 ELF 7d9d0000-7d9d9000 Deferred librt.so.1 ELF 7d9d9000-7d9de000 Deferred libgpg-error.so.0 ELF 7d9de000-7d9f6000 Deferred libresolv.so.2 ELF 7d9f6000-7d9fa000 Deferred libkeyutils.so.1 ELF 7d9fa000-7da43000 Deferred libdbus-1.so.3 ELF 7da43000-7da55000 Deferred libp11-kit.so.0 ELF 7da55000-7dada000 Deferred libgcrypt.so.11 ELF 7dada000-7daec000 Deferred libtasn1.so.3 ELF 7daec000-7daf5000 Deferred libkrb5support.so.0 ELF 7daf5000-7dafa000 Deferred libcom_err.so.2 ELF 7dafa000-7db22000 Deferred libk5crypto.so.3 ELF 7db22000-7dbf1000 Deferred libkrb5.so.3 ELF 7dbf1000-7dc03000 Deferred libavahi-client.so.3 ELF 7dc03000-7dc11000 Deferred libavahi-common.so.3 ELF 7dc11000-7dcd5000 Deferred libgnutls.so.26 ELF 7dcd5000-7dd13000 Deferred libgssapi_krb5.so.2 ELF 7dd13000-7dd66000 Deferred libcups.so.2 ELF 7dd94000-7ddc8000 Deferred uxtheme<elf> \-PE 7dda0000-7ddc8000 \ uxtheme ELF 7ddc8000-7ddd3000 Deferred libxcursor.so.1 ELF 7ddd4000-7dde7000 Deferred gnome-keyring-pkcs11.so ELF 7de47000-7de4d000 Deferred libxfixes.so.3 ELF 7deac000-7ded6000 Deferred libexpat.so.1 ELF 7ded6000-7df0a000 Deferred libfontconfig.so.1 ELF 7df0a000-7df1a000 Deferred libxi.so.6 ELF 7df1a000-7df1e000 Deferred libxcomposite.so.1 ELF 7df1e000-7df27000 Deferred libxrandr.so.2 ELF 7df27000-7df31000 Deferred libxrender.so.1 ELF 7df31000-7df37000 Deferred libxxf86vm.so.1 ELF 7df37000-7df3b000 Deferred libxinerama.so.1 ELF 7df3b000-7df5d000 Deferred imm32<elf> \-PE 7df40000-7df5d000 \ imm32 ELF 7df5d000-7df64000 Deferred libxdmcp.so.6 ELF 7df64000-7df85000 Deferred libxcb.so.1 ELF 7df85000-7df9f000 Deferred libice.so.6 ELF 7df9f000-7e0d3000 Deferred libx11.so.6 ELF 7e0d3000-7e0e5000 Deferred libxext.so.6 ELF 7e0e5000-7e178000 Deferred winex11<elf> \-PE 7e0f0000-7e178000 \ winex11 ELF 7e178000-7e18e000 Deferred libz.so.1 ELF 7e18e000-7e228000 Deferred libfreetype.so.6 ELF 7e228000-7e247000 Deferred libtinfo.so.5 ELF 7e247000-7e269000 Deferred libncurses.so.5 ELF 7e27d000-7e292000 Deferred xinput1_3<elf> \-PE 7e280000-7e292000 \ xinput1_3 ELF 7e292000-7e2a6000 Deferred psapi<elf> \-PE 7e2a0000-7e2a6000 \ psapi ELF 7e2a6000-7e304000 Deferred dbghelp<elf> \-PE 7e2b0000-7e304000 \ dbghelp ELF 7e304000-7e391000 Deferred msvcrt<elf> \-PE 7e320000-7e391000 \ msvcrt ELF 7e391000-7e4c5000 Deferred wined3d<elf> \-PE 7e3a0000-7e4c5000 \ wined3d ELF 7e4c5000-7e4fe000 Deferred d3d9<elf> \-PE 7e4d0000-7e4fe000 \ d3d9 ELF 7e4fe000-7e573000 Deferred rpcrt4<elf> \-PE 7e510000-7e573000 \ rpcrt4 ELF 7e573000-7e67b000 Deferred ole32<elf> \-PE 7e590000-7e67b000 \ ole32 ELF 7e67b000-7e697000 Deferred dinput8<elf> \-PE 7e680000-7e697000 \ dinput8 ELF 7e697000-7e6d1000 Deferred winspool<elf> \-PE 7e6a0000-7e6d1000 \ winspool ELF 7e6d1000-7e7c9000 Deferred comctl32<elf> \-PE 7e6e0000-7e7c9000 \ comctl32 ELF 7e7c9000-7e833000 Deferred shlwapi<elf> \-PE 7e7e0000-7e833000 \ shlwapi ELF 7e833000-7ea44000 Deferred shell32<elf> \-PE 7e840000-7ea44000 \ shell32 ELF 7ea44000-7eb23000 Deferred comdlg32<elf> \-PE 7ea50000-7eb23000 \ comdlg32 ELF 7eb23000-7eb3c000 Deferred version<elf> \-PE 7eb30000-7eb3c000 \ version ELF 7eb3c000-7eb9c000 Deferred advapi32<elf> \-PE 7eb50000-7eb9c000 \ advapi32 ELF 7eb9c000-7ec59000 Deferred gdi32<elf> \-PE 7ebb0000-7ec59000 \ gdi32 ELF 7ec59000-7ed99000 Deferred user32<elf> \-PE 7ec70000-7ed99000 \ user32 ELF 7ef99000-7efa6000 Deferred libnss_files.so.2 ELF 7efa6000-7efc0000 Deferred libnsl.so.1 ELF 7efc0000-7efec000 Deferred libm.so.6 ELF 7efee000-7eff4000 Deferred libuuid.so.1 ELF 7eff4000-7f000000 Deferred libnss_nis.so.2 ELF b7411000-b7415000 Deferred libxau.so.6 ELF b7415000-b741e000 Deferred libnss_compat.so.2 ELF b741f000-b7424000 Deferred libdl.so.2 ELF b7424000-b75ca000 Deferred libc.so.6 ELF b75cb000-b75e6000 Deferred libpthread.so.0 ELF b75e9000-b75f2000 Deferred libsm.so.6 ELF b75fa000-b773c000 Dwarf libwine.so.1 ELF b773e000-b7760000 Deferred ld-linux.so.2 ELF b7760000-b7761000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 00000008 (D) Z:\opt\limbo\support\limbo\drive_c\Program Files\limbo\limbo.exe 00000009 0 <== 0000000e services.exe 00000020 0 0000001f 0 00000019 0 00000018 0 00000017 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001d 0 0000001a 0 00000014 0 00000013 0 0000001b plugplay.exe 00000021 0 0000001e 0 0000001c 0 00000022 explorer.exe 00000023 0 System information: Wine build: wine-1.4 Platform: i386 Host system: Linux Host version: 3.2.0-24-generic-pae

Read the article

.NET 4: “Slim”-style performance boost!

- by Vitus

RTM version of .NET 4 and Visual Studio 2010 is available, and now we can do some test with it. Parallel Extensions is one of the most valuable part of .NET 4.0. It’s a set of good tools for easily consuming multicore hardware power. And it also contains some “upgraded” sync primitives – Slim-version. For example, it include updated variant of widely known ManualResetEvent. For people, who don’t know about it: you can sync concurrency execution of some pieces of code with this sync primitive. Instance of ManualResetEvent can be in 2 states: signaled and non-signaled. Transition between it possible by Set() and Reset() methods call. Some shortly explanation: Thread 1 Thread 2 Time mre.Reset(); mre.WaitOne(); //code execution 0 //wating //code execution 1 //wating //code execution 2 //wating //code execution 3 //wating mre.Set(); 4 //code execution //… 5 Upgraded version of this primitive is ManualResetEventSlim. The idea in decreasing performance cost in case, when only 1 thread use it. Main concept in the “hybrid sync schema”, which can be done as following: internal sealed class SimpleHybridLock : IDisposable { private Int32 m_waiters = 0; private AutoResetEvent m_waiterLock = new AutoResetEvent(false); public void Enter() { if (Interlocked.Increment(ref m_waiters) == 1) return; m_waiterLock.WaitOne(); } public void Leave() { if (Interlocked.Decrement(ref m_waiters) == 0) return; m_waiterLock.Set(); } public void Dispose() { m_waiterLock.Dispose(); } } It’s a sample from Jeffry Richter’s book “CLR via C#”, 3rd edition. Primitive SimpleHybridLock have two public methods: Enter() and Leave(). You can put your concurrency-critical code between calls of these methods, and it would executed in only one thread at the moment. Code is really simple: first thread, called Enter(), increase counter. Second thread also increase counter, and suspend while m_waiterLock is not signaled. So, if we don’t have concurrent access to our lock, “heavy” methods WaitOne() and Set() will not called. It’s can give some performance bonus. ManualResetEvent use the similar idea. Of course, it have more “smart” technics inside, like a checking of recursive calls, and so on. I want to know a real difference between classic ManualResetEvent realization, and new –Slim. I wrote a simple “benchmark”: class Program { static void Main(string[] args) { ManualResetEventSlim mres = new ManualResetEventSlim(false); ManualResetEventSlim mres2 = new ManualResetEventSlim(false); ManualResetEvent mre = new ManualResetEvent(false); long total = 0; int COUNT = 50; for (int i = 0; i < COUNT; i++) { mres2.Reset(); Stopwatch sw = Stopwatch.StartNew(); ThreadPool.QueueUserWorkItem((obj) => { //Method(mres, true); Method2(mre, true); mres2.Set(); }); //Method(mres, false); Method2(mre, false); mres2.Wait(); sw.Stop(); Console.WriteLine("Pass {0}: {1} ms", i, sw.ElapsedMilliseconds); total += sw.ElapsedMilliseconds; } Console.WriteLine(); Console.WriteLine("==============================="); Console.WriteLine("Done in average=" + total / (double)COUNT); Console.ReadLine(); } private static void Method(ManualResetEventSlim mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } } private static void Method2(ManualResetEvent mre, bool value) { for (int i = 0; i < 9000000; i++) { if (value) { mre.Set(); } else { mre.Reset(); } } } } I use 2 concurrent thread (the main thread and one from thread pool) for setting and resetting ManualResetEvents, and try to run test COUNT times, and calculate average execution time. Here is the results (I get it on my dual core notebook with T7250 CPU and Windows 7 x64): ManualResetEvent ManualResetEventSlim Difference is obvious and serious – in 10 times! So, I think preferable way is using ManualResetEventSlim, because not always on calling Set() and Reset() will be called “heavy” methods for working with Windows kernel-mode objects. It’s a small and nice improvement! ;)

Read the article

Changing the sequencing strategy for File/Ftp Adapter

- by [email protected]

The File/Ftp Adapter allows the user to configure the outbound write to use a sequence number. For example, if I choose address-data_%SEQ%.txt as the FileNamingConvention, then all my files would be generated as address-data_1.txt, address-data_2.txt,...and so on. But, where does this sequence number come from? The answer lies in the "control directory" for the particular adapter project(or scenario). In general, for every project that use the File or Ftp Adapter, a unique directory is created for book keeping purposes. And since this control directory is required to be unique, the adapter uses a digest to make sure that no two control directories are the same. For example, for my FlatStructure sample, the control information for my project would go under FMW_HOME/user_projects/domains/soainfra/fileftp/controlFiles/[DIGEST]/outbound where the value of DIGEST would differ from one project to another. If you look under this directory, you will see a file control_ob.properties and this is where the sequence number is maintained. Please note that the sequence number is maintained in binary form and you hence you might need a hex editor to view its content. You will also see another zero byte file, SEQ_nnn, but, ignore that for now. We'll get to it some other time. For now, please remember that this extra file is maintained as a backup. One of the challenges faced by the adapter runtime is to guard all writes to the control files so no two threads inadverently try to update them at the same time. And, it does so with the help of a "Mutex". For now, please remember that the mutex comes in different flavors: In-memory DB-based Coherence-based User-defined Again, we will talk about these mutexes some other time. Please note that there might be scenarios, particularly under heavy load, where the mutex might become a bottleneck. The adapter, however, allows you to change the configuration so that the adapter sequence value comes from a database sequence or a stored procedure and in such situation, the mutex is acually by-passed and thereby resulting in better throughputs. In later releases, the behavior of the adapter would be defaulted to use a db-sequence. The simplest way to achieve this is by switching your JNDI for the outbound JCA file to use "eis/HAFileAdapter" as shown But, what does this do? Internally, the adapter runtime creates a sequence on the oracle database. For example, if you do a "select * from user_sequences" in your soa-infra schema, you will see a new sequence being created with name as SEQ_<GUID>__ where the GUID will differ from one project to another. However, if you want to use your own sequence, then it would require you to add a new property to your JCA file called SequenceName as shown below. Please note that you will need to create this sequence on your soainfra schema beforehand. But, what if we use DB2 or MSSQL Server as the dehydration support? DB2 supports sequences natively but MSSQL Server does not. So, the adapter runtime uses a natively generated sequence for DB2, but, for MSSQL server, the adapter relies on a stored procedure that ships with the product. If you wish to achieve the same result for SOA Suite running DB2 as the dehydration store, simply change your connection factory JNDI name in the JCA file to eis/HAFileAdapterDB2 and for MSSQL, please use eis/HAFileAdapterMSSQL. And, if you wish to use a stored procedure other than the one that ships with the product, you will need to rely on binding properties to override the adapter behavior. Particularly, you will need to instruct the adapter that you wish to use a stored procedure as shown: Please note that if you're using the File/Ftp Adapter in Append mode, then the adapter runtime degrades the mutex to use pessimistic locks as we don't want writers from different nodes to append to the same file at the same time.

Read the article

Running a Mongo Replica Set on Azure VM Roles

- by Elton Stoneman

Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/15/running-a-mongo-replica-set-on-azure-vm-roles.aspxSetting up a MongoDB Replica Set with a bunch of Azure VMs is straightforward stuff. Here’s a step-by-step which gets you from 0 to fully-redundant 3-node document database in about 30 minutes (most of which will be spent waiting for VMs to fire up). First, create yourself 3 VM roles, which is the minimum number of nodes you need for high availability. You can use any OS that Mongo supports. This guide uses Windows but the only difference will be the mechanism for starting the Mongo service when the VM starts (Windows Service, daemon etc.) While the VMs are provisioning, download and install Mongo locally, so you can set up the replica set with the Mongo shell. We’ll create our replica set from scratch, doing one machine at a time (if you have a single node you want to upgrade to a replica set, it’s the same from step 3 onwards): 1. Setup Mongo Log into the first node, download mongo and unzip it to C:. Rename the folder to remove the version – so you have c:\MongoDB\bin etc. – and create a new folder for the logs, c:\MongoDB\logs. 2. Setup your data disk When you initialize a node in a replica set, Mongo pre-allocates a whole chunk of storage to use for data replication. It will use up to 5% of your data disk, so if you use a Windows VM image with a defsault 120Gb disk and host your data on C:, then Mongo will allocate 6Gb for replication. And that takes a while. Instead you can create yourself a new partition by shrinking down the C: drive in Computer Management, by say 10Gb, and then creating a new logical disk for your data from that spare 10Gb, which will be allocated as E:. Create a new folder, e:\data. 3. Start Mongo When that’s done, start a command line, point to the mongo binaries folder, install Mongo as a Windows Service, running in replica set mode, and start the service: cd c:\mongodb\bin mongod -logpath c:\mongodb\logs\mongod.log -dbpath e:\data -replSet TheReplicaSet –install net start mongodb 4. Open the ports Mongo uses port 27017 by default, so you need to allow access in the machine and in Azure. In the VM, open Windows Firewall and create a new inbound rule to allow access via port 27017. Then in the Azure Management Console for the VM role, under the Configure tab add a new rule, again to allow port 27017. 5. Initialise the replica set Start up your local mongo shell, connecting to your Azure VM, and initiate the replica set: c:\mongodb\bin\mongo sc-xyz-db1.cloudapp.net rs.initiate() This is the bit where the new node (at this point the only node) allocates its replication files, so if your data disk is large, this can take a long time (if you’re using the default C: drive with 120Gb, it may take so long that rs.initiate() never responds. If you’re sat waiting more than 20 minutes, start another instance of the mongo shell pointing to the same machine to check on it). Run rs.conf() and you should see one node configured. 6. Fix the host name for the primary – *don’t miss this one* For the first node in the replica set, Mongo on Windows doesn’t populate the full machine name. Run rs.conf() and the name of the primary is sc-xyz-db1, which isn’t accessible to the outside world. The replica set configuration needs the full DNS name of every node, so you need to manually rename it in your shell, which you can do like this: cfg = rs.conf() cfg.members[0].host = ‘sc-xyz-db1.cloudapp.net:27017’ rs.reconfig(cfg) When that returns, rs.conf() will have your full DNS name for the primary, and the other nodes will be able to connect. At this point you have a working database, so you can start adding documents, but there’s no replication yet. 7. Add more nodes For the next two VMs, follow steps 1 through to 4, which will give you a working Mongo database on each node, which you can add to the replica set from the shell with rs.add(), using the full DNS name of the new node and the port you’re using: rs.add(‘sc-xyz-db2.cloudapp.net:27017’) Run rs.status() and you’ll see your new node in STARTUP2 state, which means its initializing and replicating from the PRIMARY. Repeat for your third node: rs.add(‘sc-xyz-db3.cloudapp.net:27017’) When all nodes are finished initializing, you will have a PRIMARY and two SECONDARY nodes showing in rs.status(). Now you have high availability, so you can happily stop db1, and one of the other nodes will become the PRIMARY with no loss of data or service. Note – the process for AWS EC2 is exactly the same, but with one important difference. On the Azure Windows Server 2012 base image, the MongoDB release for 64-bit 2008R2+ works fine, but on the base 2012 AMI that release keeps failing with a UAC permission error. The standard 64-bit release is fine, but it lacks some optimizations that are in the 2008R2+ version.

Read the article

Securing an ADF Application using OES11g: Part 1

- by user12587121

Future releases of the Oracle stack should allow ADF applications to be secured natively with Oracle Entitlements Server (OES). In a sequence of postings here I explore one way to achive this with the current technology, namely OES 11.1.1.5 and ADF 11.1.1.6. ADF Security Basics ADF Bascis The Application Development Framework (ADF) is Oracle’s preferred technology for developing GUI based Java applications. It can be used to develop a UI for Swing applications or, more typically in the Oracle stack, for Web and J2EE applications. ADF is based on and extends the Java Server Faces (JSF) technology. To get an idea, Oracle provides an online demo to showcase ADF components. ADF can be used to develop just the UI part of an application, where, for example, the data access layer is implemented using some custom Java beans or EJBs. However ADF also has it’s own data access layer, ADF Business Components (ADF BC) that will allow rapid integration of data from data bases and Webservice interfaces to the ADF UI component. In this way ADF helps implement the MVC approach to building applications with UI and data components. The canonical tutorial for ADF is to open JDeveloper, define a connection to a database, drag and drop a table from the database view to a UI page, build and deploy. One has an application up and running very quickly with the ability to quickly integrate changes to, for example, the DB schema. ADF allows web pages to be created graphically and components like tables, forms, text fields, graphs and so on to be easily added to a page. On top of JSF Oracle have added drag and drop tooling with JDeveloper and declarative binding of the UI to the data layer, be it database, WebService or Java beans. An important addition is the bounded task flow which is a reusable set of pages and transitions. ADF adds some steps to the page lifecycle defined in JSF and adds extra widgets including powerful visualizations. It is worth pointing out that the Oracle Web Center product (portal, content management and so on) is based on and extends ADF. ADF Security ADF comes with it’s own security mechanism that is exposed by JDeveloper at development time and in the WLS Console and Enterprise Manager (EM) at run time. The security elements that need to be addressed in an ADF application are: authentication, authorization of access to web pages, task-flows, components within the pages and data being returned from the model layer. One typically relies on WLS to handle authentication and because of this users and groups will also be handled by WLS. Typically in a Dev environment, users and groups are stored in the WLS embedded LDAP server. One has a choice when enabling ADF security (Application->Secure->Configure ADF Security) about whether to turn on ADF authorization checking or not: In the case where authorization is enabled for ADF one defines a set of roles in which we place users and then we grant access to these roles to the different ADF elements (pages or task flows or elements in a page). An important notion here is the difference between Enterprise Roles and Application Roles. The idea behind an enterprise role is that is defined in terms of users and LDAP groups from the WLS identity store. “Enterprise” in the sense that these are things available for use to all applications that use that store. The other kind of role is an Application Role and the idea is that a given application will make use of Enterprise roles and users to build up a set of roles for it’s own use. These application roles will be available only to that application. The general idea here is that the enterprise roles are relatively static (for example an Employees group in the LDAP directory) while application roles are more dynamic, possibly depending on time, location, accessed resource and so on. One of the things that OES adds that is that we can define these dynamic membership conditions in Role Mapping Policies. To make this concrete, here is how, at design time in Jdeveloper, one assigns these rights in Jdeveloper, which puts them into a file called jazn-data.xml: When the ADF app is deployed to a WLS this JAZN security data is pushed to the system-jazn-data.xml file of the WLS deployment for the policies and application roles and to the WLS backing LDAP for the users and enterprise roles. Note the difference here: after deploying the application we will see the users and enterprise roles show up in the WLS LDAP server. But the policies and application roles are defined in the system-jazn-data.xml file. Consult the embedded WLS LDAP server to manage users and enterprise roles by going to the domain console and then Security Realms->myrealm->Users and Groups: For production environments (or in future to share this data with OES) one would then perform the operation of “reassociating” this security policy and application role data to a DB schema (or an LDAP). This is done in the EM console by reassociating the Security Provider. This blog posting has more explanations and references on this reassociation process. If ADF Authentication and Authorization are enabled then the Security Policies for a deployed application can be managed in EM. Our goal is to be able to manage security policies for the applicaiton rather via OES and it's console. Security Requirements for an ADF Application With this package tour of ADF security we can see that to secure an ADF application with we would expect to be able to take care of at least the following items: Authentication, including a user and user-group store Authorization for page access Authorization for bounded Task Flow access. A bounded task flow has only one point of entry and so if we protect that entry point by calling to OES then all the pages in the flow are protected. Authorization for viewing data coming from the data access layer In the next posting we will describe a sample ADF application and required security policies. References ADF Dev Guide: Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework: Enabling ADF Security in a Fusion Web Application Oracle tutorial on securing a sample ADF application, appears to require ADF 11.1.2 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Securing WebSocket applications on Glassfish

- by Pavel Bucek

Today we are going to cover deploying secured WebSocket applications on Glassfish and access to these services using WebSocket Client API. WebSocket server application setup Our server endpoint might look as simple as this: @ServerEndpoint("/echo") public class EchoEndpoint { @OnMessage public String echo(String message) { return message + " (from your server)"; } } Everything else must be configured on container level. We can start with enabling SSL, which will require web.xml to be added to your project. For starters, it might look as following: <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee"> <security-constraint> <web-resource-collection> <web-resource-name>Protected resource</web-resource-name> <url-pattern>/*</url-pattern> <http-method>GET</http-method> </web-resource-collection>  <user-data-constraint> <transport-guarantee>CONFIDENTIAL</transport-guarantee> </user-data-constraint> </security-constraint> </web-app> This is minimal web.xml for this task - web-resource-collection just defines URL pattern and HTTP method(s) we want to put a constraint on and user-data-constraint defines that constraint, which is in our case transport-guarantee. More information about these properties and security settings for web application can be found in Oracle Java EE 7 Tutorial. I have some simple webpage attached as well, so I can test my endpoint right away. You can find it (along with complete project) in Tyrus workspace: [webpage] [whole project]. After deploying this application to Glassfish Application Server, you should be able to hit it using your favorite browser. URL where my application resides is https://localhost:8181/sample-echo-https/ (may be different, depends on other configuration). My browser warns me about untrusted certificate (I use what freshly built Glassfish provides - self signed certificates) and after adding an exception for this site, I can see my webpage and I am able to securely connect to wss://localhost:8181/sample-echo-https/echo. WebSocket client Already mentioned demo application also contains test client, but execution of this is skipped for normal build. Reason for this is that Glassfish uses these self-signed "random" untrusted certificates and you are (in most cases) not able to connect to these services without any additional settings. Creating test WebSocket client is actually quite similar to server side, only difference is that you have to somewhere create client container and invoke connect with some additional info. Java API for WebSocket allows you to use annotated and programmatic way to construct endpoints. Server side shows the annotated case, so let's see how the programmatic approach will look. final WebSocketContainer client = ContainerProvider.getWebSocketContainer(); client.connectToServer(new Endpoint() { @Override public void onOpen(Session session, EndpointConfig EndpointConfig) { try { // register message handler - will just print out the // received message on standard output. session.addMessageHandler(new MessageHandler.Whole<String>() { @Override public void onMessage(String message) { System.out.println("### Received: " + message); } }); // send a message session.getBasicRemote().sendText("Do or do not, there is no try."); } catch (IOException e) { // do nothing } } }, ClientEndpointConfig.Builder.create().build(), URI.create("wss://localhost:8181/sample-echo-https/echo")); This client should work with some secured endpoint with valid certificated signed by some trusted certificate authority (you can try that with wss://echo.websocket.org). Accessing our Glassfish instance will require some additional settings. You can tell Java which certificated you trust by adding -Djavax.net.ssl.trustStore property (and few others in case you are using linked sample). Complete command line when you are testing your service might need to look somewhat like: mvn clean test -Djavax.net.ssl.trustStore=$AS_MAIN/domains/domain1/config/cacerts.jks\ -Djavax.net.ssl.trustStorePassword=changeit -Dtyrus.test.host=localhost\ -DskipTests=false Where AS_MAIN points to your Glassfish instance. Note: you might need to setup keyStore and trustStore per client instead of per JVM; there is a way how to do it, but it is Tyrus proprietary feature: http://tyrus.java.net/documentation/1.2.1/user-guide.html#d0e1128. And that's it! Now nobody is able to "hear" what you are sending to or receiving from your WebSocket endpoint. There is always room for improvement, so the next step you might want to take is introduce some authentication mechanism (like HTTP Basic or Digest). This topic is more about container configuration so I'm not going to go into details, but there is one thing worth mentioning: to access services which require authorization, you might need to put this additional information to HTTP headers of first (Upgrade) request (there is not (yet) any direct support even for these fundamental mechanisms, user need to register Configurator and add headers in beforeRequest method invocation). I filed related feature request as TYRUS-228; feel free to comment/vote if you need this functionality.

Read the article

Wireless not working on Dell XPS 17 after installing 12.04

- by user60622

I (linux newbie) have a Dell XPS 17 and tried to install Ubuntu 12.04. After installation all WLAN accesspoints near are detected. But I can not connect (but I am able to connect with other computers as well as with Dell XPS 17 under windows). Outputs: iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:"LerchenPoint" Mode:Managed Frequency:2.412 GHz Access Point: 58:6D:8F:A0:2D:58 Bit Rate=1 Mb/s Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-37 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:19 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:99:98:28 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-24-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:50 memory:f0400000-f0401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:0a:00.0 logical name: eth0 version: 06 serial: f0:4d:a2:56:e3:94 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.123 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:47 ioport:6000(size=256) memory:f0a04000-f0a04fff memory:f0a00000-f0a03fff dmesg | grep iwl [ 10.157531] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 10.157561] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 10.157598] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 10.157599] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 10.157601] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 10.157731] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 10.157834] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 10.157976] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 10.179772] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 10.179775] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 10.179777] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 10.179796] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 10.574728] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 10.726409] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.714132] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 19.777862] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2251.603089] iwlwifi 0000:04:00.0: PCI INT A disabled [ 2266.578350] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2266.578399] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 2266.578435] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 2266.578437] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011090000 [ 2266.578439] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 2266.578704] iwlwifi 0000:04:00.0: irq 50 for MSI/MSI-X [ 2266.578808] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 2266.578916] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.600709] iwlwifi 0000:04:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 2266.600712] iwlwifi 0000:04:00.0: Device SKU: 0X50 [ 2266.600713] iwlwifi 0000:04:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 2266.600727] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 2266.605978] iwlwifi 0000:04:00.0: loaded firmware version 39.31.5.1 build 35138 [ 2266.606331] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 2266.614179] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 2266.681541] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S Solutions I tried: rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. rmmod /lib/modules/3.2.0-24-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.2.0-24-generic/kernel/net/wireless/cfg80211.ko sudo modprobe iwlwifi WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release. replacing iwlwifi-1000-5.ucode (current driver) against iwlwifi-1000-3.ucode sudo jockey-gtk: (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed (jockey-gtk:2493): Gtk-CRITICAL **: gtk_icon_set_render_icon_pixbuf: assertion icon_set != NULL' failed nothing is listet in "Additional drivers" (german: "Zusätzliche Treiber"). gksudo gedit /etc/modprobe.d/blacklist.conf add "blacklist acer_wmi" Any help would be appreciated very much. Thanks!!

Read the article

Oracle VM RAC template - what it took

- by wcoekaer

In my previous posting I introduced the latest Oracle Real Application Cluster / Oracle VM template. I mentioned how easy it is to deploy a complete Oracle RAC cluster with Oracle VM. In fact, you don't need any prior knowledge at all to get a complete production-ready setup going. Here is an example... I built a 4 node RAC cluster, completely configured in just over 40 minutes - starting from import template into Oracle VM, create VMs to fully up and running Oracle RAC. And what was needed? 1 textfile with some hostnames and ip addresses and deploycluster.py. The setup is a 4 node cluster where each VM has 8GB of RAM and 4 vCPUs. The shared ASM storage in this case is 100GB, 5 x 20GB volumes. The VM names are racovm.0-racovm.3. The deploycluster script starts the VMs, verifies the configuration and sends the database cluster configuration info through Oracle VM Manager to the 4 node VMs. Once the VMs are up and running, the first VM starts the actual Oracle RAC setup inside and talks to the 3 other VMs. I did not log into any VM until after everything was completed. In fact, I connected to the database remotely before logging in at all. # ./deploycluster.py -u admin -H localhost --vms racovm.0,racovm.1,racovm.2,racovm.3 --netconfig ./netconfig.ini Oracle RAC OneCommand (v1.1.0) for Oracle VM - deploy cluster - (c) 2011-2012 Oracle Corporation (com: 26700:v1.1.0, lib: 126247:v1.1.0, var: 1100:v1.1.0) - v2.4.3 - wopr8.wimmekes.net (x86_64) Invoked as root at Sat Jun 2 17:31:29 2012 (size: 37500, mtime: Wed May 16 00:13:19 2012) Using: ./deploycluster.py -u admin -H localhost --vms racovm.0,racovm.1,racovm.2,racovm.3 --netconfig ./netconfig.ini INFO: Login password to Oracle VM Manager not supplied on command line or environment (DEPLOYCLUSTER_MGR_PASSWORD), prompting... Password: INFO: Attempting to connect to Oracle VM Manager... INFO: Oracle VM Client (3.1.1.305) protocol (1.8) CONNECTED (tcp) to Oracle VM Manager (3.1.1.336) protocol (1.8) IP (192.168.1.40) UUID (0004fb0000010000cbce8a3181569a3e) INFO: Inspecting /root/rac/deploycluster/netconfig.ini for number of nodes defined... INFO: Detected 4 nodes in: /root/rac/deploycluster/netconfig.ini INFO: Located a total of (4) VMs; 4 VMs with a simple name of: ['racovm.0', 'racovm.1', 'racovm.2', 'racovm.3'] INFO: Verifying all (4) VMs are in Running state INFO: VM with a simple name of "racovm.0" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.1" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.2" is in a Stopped state, attempting to start it...OK. INFO: VM with a simple name of "racovm.3" is in a Stopped state, attempting to start it...OK. INFO: Detected that all (4) VMs specified on command have (5) common shared disks between them (ASM_MIN_DISKS=5) INFO: The (4) VMs passed basic sanity checks and in Running state, sending cluster details as follows: netconfig.ini (Network setup): /root/rac/deploycluster/netconfig.ini buildcluster: yes INFO: Starting to send cluster details to all (4) VM(s)....... INFO: Sending to VM with a simple name of "racovm.0".... INFO: Sending to VM with a simple name of "racovm.1"..... INFO: Sending to VM with a simple name of "racovm.2"..... INFO: Sending to VM with a simple name of "racovm.3"...... INFO: Cluster details sent to (4) VMs... Check log (default location /u01/racovm/buildcluster.log) on build VM (racovm.0)... INFO: deploycluster.py completed successfully at 17:32:02 in 33.2 seconds (00m:33s) Logfile at: /root/rac/deploycluster/deploycluster2.log my netconfig.ini # Node specific information NODE1=db11rac1 NODE1VIP=db11rac1-vip NODE1PRIV=db11rac1-priv NODE1IP=192.168.1.56 NODE1VIPIP=192.168.1.65 NODE1PRIVIP=192.168.2.2 NODE2=db11rac2 NODE2VIP=db11rac2-vip NODE2PRIV=db11rac2-priv NODE2IP=192.168.1.58 NODE2VIPIP=192.168.1.66 NODE2PRIVIP=192.168.2.3 NODE3=db11rac3 NODE3VIP=db11rac3-vip NODE3PRIV=db11rac3-priv NODE3IP=192.168.1.173 NODE3VIPIP=192.168.1.174 NODE3PRIVIP=192.168.2.4 NODE4=db11rac4 NODE4VIP=db11rac4-vip NODE4PRIV=db11rac4-priv NODE4IP=192.168.1.175 NODE4VIPIP=192.168.1.176 NODE4PRIVIP=192.168.2.5 # Common data PUBADAP=eth0 PUBMASK=255.255.255.0 PUBGW=192.168.1.1 PRIVADAP=eth1 PRIVMASK=255.255.255.0 RACCLUSTERNAME=raccluster DOMAINNAME=wimmekes.net DNSIP= # Device used to transfer network information to second node # in interview mode NETCONFIG_DEV=/dev/xvdc # 11gR2 specific data SCANNAME=db11vip SCANIP=192.168.1.57 last few lines of the in-VM log file : 2012-06-02 14:01:40:[clusterstate:Time :db11rac1] Completed successfully in 2 seconds (0h:00m:02s) 2012-06-02 14:01:40:[buildcluster:Done :db11rac1] Build 11gR2 RAC Cluster 2012-06-02 14:01:40:[buildcluster:Time :db11rac1] Completed successfully in 1779 seconds (0h:29m:39s) From start_vm to completely configured : 29m:39s. The other 10m was the import template and create 4 VMs from template along with the shared storage configuration. This consists of a complete Oracle 11gR2 RAC database with ASM, CRS and the RDBMS up and running on all 4 nodes. Simply connect and use. Production ready. Oracle on Oracle.

Read the article

Consuming the Amazon S3 service from a Win8 Metro Application

- by cibrax

As many of the existing Http APIs for Cloud Services, AWS also provides a set of different platform SDKs for hiding many of complexities present in the APIs. While there is a platform SDK for .NET, which is open source and available in C#, that SDK does not work in Win8 Metro Applications for the changes introduced in WinRT. WinRT offers a complete different set of APIs for doing I/O operations such as doing http calls or using cryptography for signing or encrypting data, two aspects that are absolutely necessary for consuming AWS. All the I/O APIs available as part of WinRT are asynchronous, and uses the TPL model for .NET applications (HTML and JavaScript Metro applications use a model based in promises, which is similar concept). In the case of S3, the http Authorization header is used for two purposes, authenticating clients and make sure the messages were not altered while they were in transit. For doing that, it uses a signature or hash of the message content and some of the headers using a symmetric key (That's just one of the available mechanisms). Windows Azure for example also uses the same mechanism in many of its APIs. There are three challenges that any developer working for first time in Metro will have to face to consume S3, the new WinRT APIs, the asynchronous nature of them and the complexity introduced for generating the Authorization header. Having said that, I decided to write this post with some of the gotchas I found myself trying to consume this Amazon service. 1. Generating the signature for the Authorization header All the cryptography APIs in WinRT are available under Windows.Security.Cryptography namespace. Many of operations available in these APIs uses the concept of buffers (IBuffer) for representing a chunk of binary data. As you will see in the example below, these buffers are mainly generated with the use of static methods in a WinRT class CryptographicBuffer available as part of the namespace previously mentioned. private string DeriveAuthToken(string resource, string httpMethod, string timestamp) { var stringToSign = string.Format("{0}\n" + "\n" + "\n" + "\n" + "x-amz-date:{1}\n" + "/{2}/", httpMethod, timestamp, resource); var algorithm = MacAlgorithmProvider.OpenAlgorithm("HMAC_SHA1"); var keyMaterial = CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(this.secret)); var hmacKey = algorithm.CreateKey(keyMaterial); var signature = CryptographicEngine.Sign( hmacKey, CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(stringToSign)) ); return CryptographicBuffer.EncodeToBase64String(signature); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The algorithm that determines the information or content you need to use for generating the signature is very well described as part of the AWS documentation. In this case, this method is generating a signature required for creating a new bucket. A HmacSha1 hash is computed using a secret or symetric key provided by AWS in the management console. 2. Sending an Http Request to the S3 service WinRT also ships with the System.Net.Http.HttpClient that was first introduced some months ago with ASP.NET Web API. This client provides a rich interface on top the traditional WebHttpRequest class, and also solves some of limitations found in this last one. There are a few things that don't work with a raw WebHttpRequest such as setting the Host header, which is something absolutely required for consuming S3. Also, HttpClient is more friendly for doing unit tests, as it receives a HttpMessageHandler as part of the constructor that can fake to emulate a real http call. This is how the code for consuming the service with HttpClient looks like, public async Task<S3Response> CreateBucket(string name, string region = null, params string[] acl) { var timestamp = string.Format("{0:r}", DateTime.UtcNow); var auth = DeriveAuthToken(name, "PUT", timestamp); var request = new HttpRequestMessage(HttpMethod.Put, "http://s3.amazonaws.com/"); request.Headers.Host = string.Format("{0}.s3.amazonaws.com", name); request.Headers.TryAddWithoutValidation("Authorization", "AWS " + this.key + ":" + auth); request.Headers.Add("x-amz-date", timestamp); var client = new HttpClient(); var response = await client.SendAsync(request); return new S3Response { Succeed = response.StatusCode == HttpStatusCode.OK, Message = (response.Content != null) ? await response.Content.ReadAsStringAsync() : null }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You will notice a few additional things in this code. By default, HttpClient validates the values for some well-know headers, and Authorization is one of them. It won't allow you to set a value with ":" on it, which is something that S3 expects. However, that's not a problem at all, as you can skip the validation by using the TryAddWithoutValidation method. Also, the code is heavily relying on the new async and await keywords to transform all the asynchronous calls into synchronous ones. In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can use this handler for injecting any response while you are unit testing the code.

Read the article

Consuming the Amazon S3 service from a Win8 Metro Application

- by cibrax

As many of the existing Http APIs for Cloud Services, AWS also provides a set of different platform SDKs for hiding many of complexities present in the APIs. While there is a platform SDK for .NET, which is open source and available in C#, that SDK does not work in Win8 Metro Applications for the changes introduced in WinRT. WinRT offers a complete different set of APIs for doing I/O operations such as doing http calls or using cryptography for signing or encrypting data, two aspects that are absolutely necessary for consuming AWS. All the I/O APIs available as part of WinRT are asynchronous, and uses the TPL model for .NET applications (HTML and JavaScript Metro applications use a model based in promises, which is similar concept). In the case of S3, the http Authorization header is used for two purposes, authenticating clients and make sure the messages were not altered while they were in transit. For doing that, it uses a signature or hash of the message content and some of the headers using a symmetric key (That's just one of the available mechanisms). Windows Azure for example also uses the same mechanism in many of its APIs. There are three challenges that any developer working for first time in Metro will have to face to consume S3, the new WinRT APIs, the asynchronous nature of them and the complexity introduced for generating the Authorization header. Having said that, I decided to write this post with some of the gotchas I found myself trying to consume this Amazon service. 1. Generating the signature for the Authorization header All the cryptography APIs in WinRT are available under Windows.Security.Cryptography namespace. Many of operations available in these APIs uses the concept of buffers (IBuffer) for representing a chunk of binary data. As you will see in the example below, these buffers are mainly generated with the use of static methods in a WinRT class CryptographicBuffer available as part of the namespace previously mentioned. private string DeriveAuthToken(string resource, string httpMethod, string timestamp) { var stringToSign = string.Format("{0}\n" + "\n" + "\n" + "\n" + "x-amz-date:{1}\n" + "/{2}/", httpMethod, timestamp, resource); var algorithm = MacAlgorithmProvider.OpenAlgorithm("HMAC_SHA1"); var keyMaterial = CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(this.secret)); var hmacKey = algorithm.CreateKey(keyMaterial); var signature = CryptographicEngine.Sign( hmacKey, CryptographicBuffer.CreateFromByteArray(Encoding.UTF8.GetBytes(stringToSign)) ); return CryptographicBuffer.EncodeToBase64String(signature); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The algorithm that determines the information or content you need to use for generating the signature is very well described as part of the AWS documentation. In this case, this method is generating a signature required for creating a new bucket. A HmacSha1 hash is computed using a secret or symetric key provided by AWS in the management console. 2. Sending an Http Request to the S3 service WinRT also ships with the System.Net.Http.HttpClient that was first introduced some months ago with ASP.NET Web API. This client provides a rich interface on top the traditional WebHttpRequest class, and also solves some of limitations found in this last one. There are a few things that don't work with a raw WebHttpRequest such as setting the Host header, which is something absolutely required for consuming S3. Also, HttpClient is more friendly for doing unit tests, as it receives a HttpMessageHandler as part of the constructor that can fake to emulate a real http call. This is how the code for consuming the service with HttpClient looks like, public async Task<S3Response> CreateBucket(string name, string region = null, params string[] acl) { var timestamp = string.Format("{0:r}", DateTime.UtcNow); var auth = DeriveAuthToken(name, "PUT", timestamp); var request = new HttpRequestMessage(HttpMethod.Put, "http://s3.amazonaws.com/"); request.Headers.Host = string.Format("{0}.s3.amazonaws.com", name); request.Headers.TryAddWithoutValidation("Authorization", "AWS " + this.key + ":" + auth); request.Headers.Add("x-amz-date", timestamp); var client = new HttpClient(); var response = await client.SendAsync(request); return new S3Response { Succeed = response.StatusCode == HttpStatusCode.OK, Message = (response.Content != null) ? await response.Content.ReadAsStringAsync() : null }; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You will notice a few additional things in this code. By default, HttpClient validates the values for some well-know headers, and Authorization is one of them. It won't allow you to set a value with ":" on it, which is something that S3 expects. However, that's not a problem at all, as you can skip the validation by using the TryAddWithoutValidation method. Also, the code is heavily relying on the new async and await keywords to transform all the asynchronous calls into synchronous ones. In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, In case you would want to unit test this code and faking the call to the real S3 service, you should have to modify it to inject a custom HttpMessageHandler into the HttpClient. The following implementation illustrates this concept, public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } You can use this handler for injecting any response while you are unit testing the code.

Read the article

Getting App.config to be configuration specific in VS2010

- by MarkPearl

I recently wanted to have a console application that had configuration specific settings. For instance, if I had two configurations “Debug” and “Release”, depending on the currently selected configuration I wanted it to use a specific configuration file (either debug or config). If you are wanting to do something similar, here is a potential solution that worked for me. Setting up a demo app to illustrate the point First, let’s set up an application that will demonstrate the most basic concept. using System; using System.Configuration; namespace ConsoleSpecificConfiguration { class Program { static void Main(string[] args) { Console.WriteLine("Config"); Console.WriteLine(ConfigurationManager.AppSettings["Example Config"]); Console.ReadLine(); } } } This does a really simple thing. Display a config when run. To do this, you also need a config file set up. My default looks as follows… <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="Example Config" value="Default"/> </appSettings> </configuration> Your entire solution will look as follows… Running the project you will get the following amazing output… Let’s now say instead of having one config file we want depending on whether we are running in “Debug” or “Release” for the solution configuration we want different config settings to be propagated across you can do the following… Step 1 – Create alternate config Files First add additional config files to your solution. You should have some form of naming convention for these config files, I have decided to follow a similar convention to the one used for web.config, so in my instance I am going to add a App.Debug.config and a App.Release.config file BUT you can follow any naming convention you want provided you wire up the rest of the approach to use this convention. My files look as follows.. App.Debug.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="Example Config" value="Debug"/> </appSettings> </configuration> App.Release.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="Example Config" value="Release"/> </appSettings> </configuration> Your solution will now look as follows… Step 2 – Create a bat file that will overwrite files The next step is to create a bat file that will overwrite one file with another. If you right click on the solution in the solution explorer there will be a menu option to add new items to the solution. Create a text file called “copyifnewer.bat” which will be our copy script. It’s contents should look as follows… @echo off echo Comparing two files: %1 with %2 if not exist %1 goto File1NotFound if not exist %2 goto File2NotFound fc %1 %2 /A if %ERRORLEVEL%==0 GOTO NoCopy echo Files are not the same. Copying %1 over %2 copy %1 %2 /y & goto END :NoCopy echo Files are the same. Did nothing goto END :File1NotFound echo %1 not found. goto END :File2NotFound copy %1 %2 /y goto END :END echo Done. Your solution should now look as follows… Step 3 – Customize the Post Build event command line We now need to wire up everything – which we will do using the post build event command line in VS2010. Right click on your project and go to it’s properties We are now going to wire up the script so that when we build our project it will overwrite the default App.config with whatever file we want. The syntax goes as follows… call "$(SolutionDir)copyifnewer.bat" "$(ProjectDir)App.$(ConfigurationName).config" "$(ProjectDir)$(OutDir)\$(TargetFileName).config" Testing it If I now change my project configuration to Release And then run my application I get the following output… Toggling between Release and Debug mode will show that the config file is changing each time. And that is it!

Read the article

Caveat utilitor - Can I run two versions of Microsoft Project side-by-side?

- by Martin Hinshelwood

A number of out customers have asked if there are any problems in installing and running multiple versions of Microsoft Project on a single client. Although this is a case of Caveat utilitor (Let the user beware), as long as the user understands and accepts the issues that can occur then they can do this. Although Microsoft provide the ability to leave old versions of Office products (except Outlook) on your client when you are installing a new version of the product they certainly do not endorse doing so. Figure: For Project you can choose to keep the old stuff That being the case I would have preferred that they put a “(NOT RECOMMENDED)” after the options to impart that knowledge to the rest of us, but they did not. The default and recommended behaviour is for the newer version installer to remove the older versions. Of course this does not apply in the revers. There are no forward compatibility packs for Office. There are a number of negative behaviours (or bugs) that can occur in this configuration: There is only one MS Project In Windows a file extension can only be associated with a single program. In this case, MPP files can be associated with only one version of winproj.exe. The executables are in different folders so if a user double-clicks a Project file on the desktop, file explorer, or Outlook email, Windows will launch the winproj.exe associated with MPP and then load the MPP file. There are problems associated with this situation and in some cases workarounds. The user double-clicks on a Project 2010 file, Project 2007 launches but is unable to open the file because it is a newer version. The workaround is for the user to launch Project 2010 from the Start menu then open the file. If the file is attached to an email they will need to first drag the file to the desktop. All your linked MS Project files need to be of the same version There are a number of problems that occur when people use on Microsoft’s Object Linking and Embedding (OLE) technology. The three common uses of OLE are: for inserted projects where a Master project contains sub-projects and each sub-project resides in its own MPP file shared resource pools where multiple MPP files share a common resource pool kept in a single MPP file cross-project links where a task or milestone in one MPP file has a predecessor/successor relationship with a task or milestone in a different MPP file What I’ve seen happen before is that if you are running in a version of Project that is not associated with the MPP extension and then try and activate an OLE link then Project tries to launch the other version of Project. Things start getting very confused since different MPP files are being controlled by different versions of Project running at the same time. I haven’t tried this in awhile so I can’t give you exact symptoms but I suspect that if Project 2010 is involved the symptoms will be different then in a Project 2003/2007 scenario. I’ve noticed that Project 2010 gives different error messages for the exact same problem when it occurs in Project 2003 or 2007. -Anonymous The recommendation would be either not to use this feature if you have to have multiple versions of Project installed or to use only a single version of Project. You may get unexpected negative behaviours if you are using shared resource pools or resource pools even when you are not running multiple versions as I have found that they can get broken very easily. If you need these thing then it is probably best to use Project Server as it was created to solve many of these specific issues. Note: I would not even allow multiple people to access a network copy of a Project file because of the way Windows locks files in write mode. This can cause write-locks that get so bad a server restart is required I’ve seen user’s files get write-locked to the point where the only resolution is to reboot the server. Changing the default version to run for an extension So what if you want to change the default association from Project 2007 to Project 2010? Figure: “Control Panel | Folder Options | Change the file associated with a file extension” Windows normally only lists the last version installed for a particular extension. You can select a specific version by selecting the program you want to change and clicking “Change program… | Browse…” and then selecting the .exe you want to use on the file system. Figure: You will need to select the exact version of “winproj.exe” that you want to run Conclusion Although it is possible to run multiple versions of Project on one system in the main it does not really make sense.

Read the article

Inheritance Mapping Strategies with Entity Framework Code First CTP5: Part 2 – Table per Type (TPT)

- by mortezam

In the previous blog post you saw that there are three different approaches to representing an inheritance hierarchy and I explained Table per Hierarchy (TPH) as the default mapping strategy in EF Code First. We argued that the disadvantages of TPH may be too serious for our design since it results in denormalized schemas that can become a major burden in the long run. In today’s blog post we are going to learn about Table per Type (TPT) as another inheritance mapping strategy and we'll see that TPT doesn’t expose us to this problem. Table per Type (TPT)Table per Type is about representing inheritance relationships as relational foreign key associations. Every class/subclass that declares persistent properties—including abstract classes—has its own table. The table for subclasses contains columns only for each noninherited property (each property declared by the subclass itself) along with a primary key that is also a foreign key of the base class table. This approach is shown in the following figure: For example, if an instance of the CreditCard subclass is made persistent, the values of properties declared by the BillingDetail base class are persisted to a new row of the BillingDetails table. Only the values of properties declared by the subclass (i.e. CreditCard) are persisted to a new row of the CreditCards table. The two rows are linked together by their shared primary key value. Later, the subclass instance may be retrieved from the database by joining the subclass table with the base class table. TPT Advantages The primary advantage of this strategy is that the SQL schema is normalized. In addition, schema evolution is straightforward (modifying the base class or adding a new subclass is just a matter of modify/add one table). Integrity constraint definition are also straightforward (note how CardType in CreditCards table is now a non-nullable column). Another much more important advantage is the ability to handle polymorphic associations (a polymorphic association is an association to a base class, hence to all classes in the hierarchy with dynamic resolution of the concrete class at runtime). A polymorphic association to a particular subclass may be represented as a foreign key referencing the table of that particular subclass. Implement TPT in EF Code First We can create a TPT mapping simply by placing Table attribute on the subclasses to specify the mapped table name (Table attribute is a new data annotation and has been added to System.ComponentModel.DataAnnotations namespace in CTP5): public abstract class BillingDetail { public int BillingDetailId { get; set; } public string Owner { get; set; } public string Number { get; set; } } [Table("BankAccounts")] public class BankAccount : BillingDetail { public string BankName { get; set; } public string Swift { get; set; } } [Table("CreditCards")] public class CreditCard : BillingDetail { public int CardType { get; set; } public string ExpiryMonth { get; set; } public string ExpiryYear { get; set; } } public class InheritanceMappingContext : DbContext { public DbSet<BillingDetail> BillingDetails { get; set; } } If you prefer fluent API, then you can create a TPT mapping by using ToTable() method: protected override void OnModelCreating(ModelBuilder modelBuilder) { modelBuilder.Entity<BankAccount>().ToTable("BankAccounts"); modelBuilder.Entity<CreditCard>().ToTable("CreditCards"); } Generated SQL For QueriesLet’s take an example of a simple non-polymorphic query that returns a list of all the BankAccounts: var query = from b in context.BillingDetails.OfType<BankAccount>() select b; Executing this query (by invoking ToList() method) results in the following SQL statements being sent to the database (on the bottom, you can also see the result of executing the generated query in SQL Server Management Studio): Now, let’s take an example of a very simple polymorphic query that requests all the BillingDetails which includes both BankAccount and CreditCard types: projects some properties out of the base class BillingDetail, without querying for anything from any of the subclasses: var query = from b in context.BillingDetails select new { b.BillingDetailId, b.Number, b.Owner }; -- var query = from b in context.BillingDetails select b; This LINQ query seems even more simple than the previous one but the resulting SQL query is not as simple as you might expect: -- As you can see, EF Code First relies on an INNER JOIN to detect the existence (or absence) of rows in the subclass tables CreditCards and BankAccounts so it can determine the concrete subclass for a particular row of the BillingDetails table. Also the SQL CASE statements that you see in the beginning of the query is just to ensure columns that are irrelevant for a particular row have NULL values in the returning flattened table. (e.g. BankName for a row that represents a CreditCard type) TPT ConsiderationsEven though this mapping strategy is deceptively simple, the experience shows that performance can be unacceptable for complex class hierarchies because queries always require a join across many tables. In addition, this mapping strategy is more difficult to implement by hand— even ad-hoc reporting is more complex. This is an important consideration if you plan to use handwritten SQL in your application (For ad hoc reporting, database views provide a way to offset the complexity of the TPT strategy. A view may be used to transform the table-per-type model into the much simpler table-per-hierarchy model.) SummaryIn this post we learned about Table per Type as the second inheritance mapping in our series. So far, the strategies we’ve discussed require extra consideration with regard to the SQL schema (e.g. in TPT, foreign keys are needed). This situation changes with the Table per Concrete Type (TPC) that we will discuss in the next post. References ADO.NET team blog Java Persistence with Hibernate book a { text-decoration: none; } a:visited { color: Blue; } .title { padding-bottom: 5px; font-family: Segoe UI; font-size: 11pt; font-weight: bold; padding-top: 15px; } .code, .typeName { font-family: consolas; } .typeName { color: #2b91af; } .padTop5 { padding-top: 5px; } .padTop10 { padding-top: 10px; } p.MsoNormal { margin-top: 0in; margin-right: 0in; margin-bottom: 10.0pt; margin-left: 0in; line-height: 115%; font-size: 11.0pt; font-family: "Calibri" , "sans-serif"; }

Read the article

Odd company release cycle: Go Distributed Source Control?

- by MrLane

sorry about this long post, but I think it is worth it! I have just started with a small .NET shop that operates quite a bit differently to other places that I have worked. Unlike any of my previous positions, the software written here is targetted at multiple customers and not every customer gets the latest release of the software at the same time. As such, there is no "current production version." When a customer does get an update, they also get all of the features added to he software since their last update, which could be a long time ago. The software is highly configurable and features can be turned on and off: so called "feature toggles." Release cycles are very tight here, in fact they are not on a shedule: when a feature is complete the software is deployed to the relevant customer. The team only last year moved from Visual Source Safe to Team Foundation Server. The problem is they still use TFS as if it were VSS and enforce Checkout locks on a single code branch. Whenever a bug fix gets put out into the field (even for a single customer) they simply build whatever is in TFS, test the bug was fixed and deploy to the customer! (Myself coming from a pharma and medical devices software background this is unbeliveable!). The result is that half baked dev code gets put into production without being even tested. Bugs are always slipping into release builds, but often a customer who just got a build will not see these bugs if they don't use the feature the bug is in. The director knows this is a problem as the company is starting to grow all of a sudden with some big clients coming on board and more smaller ones. I have been asked to look at source control options in order to eliminate deploying of buggy or unfinished code but to not sacrifice the somewhat asyncronous nature of the teams releases. I have used VSS, TFS, SVN and Bazaar in my career, but TFS is where most of my experience has been. Previously most teams I have worked with use a two or three branch solution of Dev-Test-Prod, where for a month developers work directly in Dev and then changes are merged to Test then Prod, or promoted "when its done" rather than on a fixed cycle. Automated builds were used, using either Cruise Control or Team Build. In my previous job Bazaar was used sitting on top of SVN: devs worked in their own small feature branches then pushed their changes to SVN (which was tied into TeamCity). This was nice in that it was easy to isolate changes and share them with other peoples branches. With both of these models there was a central dev and prod (and sometimes test) branch through which code was pushed (and labels were used to mark builds in prod from which releases were made...and these were made into branches for bug fixes to releases and merged back to dev). This doesn't really suit the way of working here, however: there is no order to when various features will be released, they get pushed when they are complete. With this requirement the "continuous integration" approach as I see it breaks down. To get a new feature out with continuous integration it has to be pushed via dev-test-prod and that will capture any unfinished work in dev. I am thinking that to overcome this we should go down a heavily feature branched model with NO dev-test-prod branches, rather the source should exist as a series of feature branches which when development work is complete are locked, tested, fixed, locked, tested and then released. Other feature branches can grab changes from other branches when they need/want, so eventually all changes get absorbed into everyone elses. This fits very much down a pure Bazaar model from what I experienced at my last job. As flexible as this sounds it just seems odd to not have a dev trunk or prod branch somewhere, and I am worried about branches forking never to re-integrate, or small late changes made that never get pulled across to other branches and developers complaining about merge disasters... What are peoples thoughts on this? A second final question: I am somewhat confused about the exact definition of distributed source control: some people seem to suggest it is about just not having a central repository like TFS or SVN, some say it is about being disconnected (SVN is 90% disconnected and TFS has a perfectly functional offline mode) and others say it is about Feature Branching and ease of merging between branches with no parent-child relationship (TFS also has baseless merging!). Perhaps this is a second question!

Read the article

career advice for PhD scientist seeking to program?

- by C SD

I'm largely a self-taught programmer. In fact, I first started programming about half way through biophysics grad school, and even though I think I've done some pretty nice work, I've never worked as part of a 'serious' development team that had more than one or two other developers (and I wouldn't hesitate to call them equally inexperienced in software development as a profession). After finishing my PhD I applied to Google, on a lark, since I had some confidence in my abilities, if not necessarily my experience, and I was hoping to maybe slip in and absorb all the experience and talent I'd be surrounded with and become productive enough, quickly enough, that they wouldn't immediately regret their decision. I was excited to actually get invited to interview up at Mountain View (this was ~ mid 2008). Overall, my memory of the interview was very positive, but after close to a three month wait (is that normal?) they ended up turning me down. I wasn't too surprised or disappointed (aside from the uncomfortably long wait) given my unusual background and admitted lack of experience. I decided to continue as a postdoc, but focus on improving my skills rather than doing research. I've done about three years of that, and my honest assessment is that I've learned a ton more, but I really need more of a peer group to maintain or accelerate my growth. Google invited me to interview again about eight months ago, and the interview process went even better than the first time around (I thought), though they again declined to give me an offer. I have to admit this second rejection was much more discouraging. They had insisted I interview even after I mentioned to them that a move on my part was unlikely given that I had bought a house, gotten married, etc. since the first interview. I guess I was hoping they'd at least give me an offer that I could parlay into a more conventional, but still interesting, programming position close to home. So here I am, going on my third year out of grad school, a glorified postdoc and I'm starting to get pretty discouraged. Even though I could technically get 'back-on-track' for a career in science, I have been focusing the vast majority of this time on gaining programming experience rather than on research and publications. The problem is, whenever I look, most job listings have requirements that seem impossibly grandiose and I hesitate to apply. That, or the job/project seems incredibly dull. Ironically, applying to Google struck me as less intimidating. I suspect that either most people are just a lot less realistic than I am when it comes to assessing how long it will take for them to get up to speed, or they don't care; my fear is that I'm just woefully unqualified for any interesting, well paying work. IE: I'm confident I could switch fully back into C++ mode with a couple weeks work (I mostly use C,Python,C# daily) but I don't list myself as being 'proficient' in C++ on my CV, or applying for jobs that 'require' such knowledge. The few applications for which I did feel I was a legitimately good match have not elicited a response. I suspect the following things are potential problems with my application/CV and I would like feedback on: I don't have a CS degree. My BS was in biochemistry and molecular biology, my PhD in biophysics. I took a undergrad and grad level CS course at UCSD and completely killed them, but I don't know how to translate that to my CV effectively. I have a PhD, but it's not in CS... I've been debating if I should remove it from my CV, and wether or not it would then be misleading to list at least some of those years as some kind of 'programming' job (in many respects it was). I think there are sometimes strong stigmas associated with 'self-taught' programmers. I am certainly one of those. I even recognize that some of those stigmas hold a hint of truth, but I really do want to be an asset to a team. How do I communicate that even though I have been largely self-directing for ~8 years I can still take marching orders when needed? Do I just say so outright? Should I just become a lot less scrupulous about the whole process? anecdote: I have a friend who applied for positions where he completely fudged his qualifications to get past the first culling. He was much more honest and forthcoming about his actual qualifications when contacted and he still managed to get invited to a couple of interviews and even got some offers. His balls are larger than mine though.

Read the article

Use a Fake Http Channel to Unit Test with HttpClient

- by Steve Michelotti

Applications get data from lots of different sources. The most common is to get data from a database or a web service. Typically, we encapsulate calls to a database in a Repository object and we create some sort of IRepository interface as an abstraction to decouple between layers and enable easier unit testing by leveraging faking and mocking. This works great for database interaction. However, when consuming a RESTful web service, this is is not always the best approach. The WCF Web APIs that are available on CodePlex (current drop is Preview 3) provide a variety of features to make building HTTP REST services more robust. When you download the latest bits, you’ll also find a new HttpClient which has been updated for .NET 4.0 as compared to the one that shipped for 3.5 in the original REST Starter Kit. The HttpClient currently provides the best API for consuming REST services on the .NET platform and the WCF Web APIs provide a number of extension methods which extend HttpClient and make it even easier to use. Let’s say you have a client application that is consuming an HTTP service – this could be Silverlight, WPF, or any UI technology but for my example I’ll use an MVC application: 1: using System; 2: using System.Net.Http; 3: using System.Web.Mvc; 4: using FakeChannelExample.Models; 5: using Microsoft.Runtime.Serialization; 6: 7: namespace FakeChannelExample.Controllers 8: { 9: public class HomeController : Controller 10: { 11: private readonly HttpClient httpClient; 12: 13: public HomeController(HttpClient httpClient) 14: { 15: this.httpClient = httpClient; 16: } 17: 18: public ActionResult Index() 19: { 20: var response = httpClient.Get("Person(1)"); 21: var person = response.Content.ReadAsDataContract<Person>(); 22: 23: this.ViewBag.Message = person.FirstName + " " + person.LastName; 24: 25: return View(); 26: } 27: } 28: } On line #20 of the code above you can see I’m performing an HTTP GET request to a Person resource exposed by an HTTP service. On line #21, I use the ReadAsDataContract() extension method provided by the WCF Web APIs to serialize to a Person object. In this example, the HttpClient is being passed into the constructor by MVC’s dependency resolver – in this case, I’m using StructureMap as an IoC and my StructureMap initialization code looks like this: 1: using StructureMap; 2: using System.Net.Http; 3: 4: namespace FakeChannelExample 5: { 6: public static class IoC 7: { 8: public static IContainer Initialize() 9: { 10: ObjectFactory.Initialize(x => 11: { 12: x.For<HttpClient>().Use(() => new HttpClient("http://localhost:31614/")); 13: }); 14: return ObjectFactory.Container; 15: } 16: } 17: } My controller code currently depends on a concrete instance of the HttpClient. Now I *could* create some sort of interface and wrap the HttpClient in this interface and use that object inside my controller instead – however, there are a few why reasons that is not desirable: For one thing, the API provided by the HttpClient provides nice features for dealing with HTTP services. I don’t really *want* these to look like C# RPC method calls – when HTTP services have REST features, I may want to inspect HTTP response headers and hypermedia contained within the message so that I can make intelligent decisions as to what to do next in my workflow (although I don’t happen to be doing these things in my example above) – this type of workflow is common in hypermedia REST scenarios. If I just encapsulate HttpClient behind some IRepository interface and make it look like a C# RPC method call, it will become difficult to take advantage of these types of things. Second, it could get pretty mind-numbing to have to create interfaces all over the place just to wrap the HttpClient. Then you’re probably going to have to hard-code HTTP knowledge into your code to formulate requests rather than just “following the links” that the hypermedia in a message might provide. Third, at first glance it might appear that we need to create an interface to facilitate unit testing, but actually it’s unnecessary. Even though the code above is dependent on a concrete type, it’s actually very easy to fake the data in a unit test. The HttpClient provides a Channel property (of type HttpMessageChannel) which allows you to create a fake message channel which can be leveraged in unit testing. In this case, what I want is to be able to write a unit test that just returns fake data. I also want this to be as re-usable as possible for my unit testing. I want to be able to write a unit test that looks like this: 1: [TestClass] 2: public class HomeControllerTest 3: { 4: [TestMethod] 5: public void Index() 6: { 7: // Arrange 8: var httpClient = new HttpClient("http://foo.com"); 9: httpClient.Channel = new FakeHttpChannel<Person>(new Person { FirstName = "Joe", LastName = "Blow" }); 10: 11: HomeController controller = new HomeController(httpClient); 12: 13: // Act 14: ViewResult result = controller.Index() as ViewResult; 15: 16: // Assert 17: Assert.AreEqual("Joe Blow", result.ViewBag.Message); 18: } 19: } Notice on line #9, I’m setting the Channel property of the HttpClient to be a fake channel. I’m also specifying the fake object that I want to be in the response on my “fake” Http request. I don’t need to rely on any mocking frameworks to do this. All I need is my FakeHttpChannel. The code to do this is not complex: 1: using System; 2: using System.IO; 3: using System.Net.Http; 4: using System.Runtime.Serialization; 5: using System.Threading; 6: using FakeChannelExample.Models; 7: 8: namespace FakeChannelExample.Tests 9: { 10: public class FakeHttpChannel<T> : HttpClientChannel 11: { 12: private T responseObject; 13: 14: public FakeHttpChannel(T responseObject) 15: { 16: this.responseObject = responseObject; 17: } 18: 19: protected override HttpResponseMessage Send(HttpRequestMessage request, CancellationToken cancellationToken) 20: { 21: return new HttpResponseMessage() 22: { 23: RequestMessage = request, 24: Content = new StreamContent(this.GetContentStream()) 25: }; 26: } 27: 28: private Stream GetContentStream() 29: { 30: var serializer = new DataContractSerializer(typeof(T)); 31: Stream stream = new MemoryStream(); 32: serializer.WriteObject(stream, this.responseObject); 33: stream.Position = 0; 34: return stream; 35: } 36: } 37: } The HttpClientChannel provides a Send() method which you can override to return any HttpResponseMessage that you want. You can see I’m using the DataContractSerializer to serialize the object and write it to a stream. That’s all you need to do. In the example above, the only thing I’ve chosen to do is to provide a way to return different response objects. But there are many more features you could add to your own re-usable FakeHttpChannel. For example, you might want to provide the ability to add HTTP headers to the message. You might want to use a different serializer other than the DataContractSerializer. You might want to provide custom hypermedia in the response as well as just an object or set HTTP response codes. This list goes on. This is the just one example of the really cool features being added to the next version of WCF to enable various HTTP scenarios. The code sample for this post can be downloaded here.

Read the article

Lighting get darker when texture is aplied

- by noah

Im using OpenGL ES 1.1 for iPhone. I'm attempting to implement a skybox in my 3d world and started out by following one of Jeff Lamarches tutorials on creating textures. Heres the tutorial: iphonedevelopment.blogspot.com/2009/05/opengl-es-from-ground-up-part-6_25.html Ive successfully added the image to my 3d world but am not sure why the lighting on the other shapes has changed so much. I want the shapes to be the original color and have the image in the background. Before: https://www.dropbox.com/s/ojmb8793vj514h0/Screen%20Shot%202012-10-01%20at%205.34.44%20PM.png After: https://www.dropbox.com/s/8v6yvur8amgudia/Screen%20Shot%202012-10-01%20at%205.35.31%20PM.png Heres the init OpenGL: - (void)initOpenGLES1 { glShadeModel(GL_SMOOTH); // Enable lighting glEnable(GL_LIGHTING); // Turn the first light on glEnable(GL_LIGHT0); const GLfloat lightAmbient[] = {0.2, 0.2, 0.2, 1.0}; const GLfloat lightDiffuse[] = {0.8, 0.8, 0.8, 1.0}; const GLfloat matAmbient[] = {0.3, 0.3, 0.3, 0.5}; const GLfloat matDiffuse[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat matSpecular[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat lightPosition[] = {0.0, 0.0, 1.0, 0.0}; const GLfloat lightShininess = 100.0; //Configure OpenGL lighting glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, matSpecular); glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightfv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightfv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightfv(GL_LIGHT0, GL_POSITION, lightPosition); // Define a cutoff angle glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 40.0); // Set the clear color glClearColor(0, 0, 0, 1.0f); // Projection Matrix config glMatrixMode(GL_PROJECTION); glLoadIdentity(); CGSize layerSize = self.view.layer.frame.size; // Swapped height and width for landscape mode gluPerspective(45.0f, (GLfloat)layerSize.height / (GLfloat)layerSize.width, 0.1f, 750.0f); [self initSkyBox]; // Modelview Matrix config glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // This next line is not really needed as it is the default for OpenGL ES glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glDisable(GL_BLEND); // Enable depth testing glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LESS); glDepthMask(GL_TRUE); } Heres the drawSkybox that gets called in the drawFrame method: -(void)drawSkyBox { glDisable(GL_LIGHTING); glDisable(GL_DEPTH_TEST); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); static const SSVertex3D vertices[] = { {-1.0, 1.0, -0.0}, { 1.0, 1.0, -0.0}, {-1.0, -1.0, -0.0}, { 1.0, -1.0, -0.0} }; static const SSVertex3D normals[] = { {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0} }; static const GLfloat texCoords[] = { 0.0, 0.5, 0.5, 0.5, 0.0, 0.0, 0.5, 0.0 }; glLoadIdentity(); glTranslatef(0.0, 0.0, -3.0); glBindTexture(GL_TEXTURE_2D, texture[0]); glVertexPointer(3, GL_FLOAT, 0, vertices); glNormalPointer(GL_FLOAT, 0, normals); glTexCoordPointer(2, GL_FLOAT, 0, texCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glEnable(GL_LIGHTING); glEnable(GL_DEPTH_TEST); } Heres the init Skybox: -(void)initSkyBox { // Turn necessary features on glEnable(GL_TEXTURE_2D); glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_SRC_COLOR); // Bind the number of textures we need, in this case one. glGenTextures(1, &texture[0]); // create a texture obj, give unique ID glBindTexture(GL_TEXTURE_2D, texture[0]); // load our new texture name into the current texture glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); NSString *path = [[NSBundle mainBundle] pathForResource:@"space" ofType:@"jpg"]; NSData *texData = [[NSData alloc] initWithContentsOfFile:path]; UIImage *image = [[UIImage alloc] initWithData:texData]; GLuint width = CGImageGetWidth(image.CGImage); GLuint height = CGImageGetHeight(image.CGImage); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); void *imageData = malloc( height * width * 4 ); // times 4 because will write one byte for rgb and alpha CGContextRef cgContext = CGBitmapContextCreate( imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big ); // Flip the Y-axis CGContextTranslateCTM (cgContext, 0, height); CGContextScaleCTM (cgContext, 1.0, -1.0); CGColorSpaceRelease( colorSpace ); CGContextClearRect( cgContext, CGRectMake( 0, 0, width, height ) ); CGContextDrawImage( cgContext, CGRectMake( 0, 0, width, height ), image.CGImage ); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); CGContextRelease(cgContext); free(imageData); [image release]; [texData release]; } Any help is greatly appreciated.

Read the article

Polite busy-waiting with WRPAUSE on SPARC

- by Dave

Unbounded busy-waiting is an poor idea for user-space code, so we typically use spin-then-block strategies when, say, waiting for a lock to be released or some other event. If we're going to spin, even briefly, then we'd prefer to do so in a manner that minimizes performance degradation for other sibling logical processors ("strands") that share compute resources. We want to spin politely and refrain from impeding the progress and performance of other threads — ostensibly doing useful work and making progress — that run on the same core. On a SPARC T4, for instance, 8 strands will share a core, and that core has its own L1 cache and 2 pipelines. On x86 we have the PAUSE instruction, which, naively, can be thought of as a hardware "yield" operator which temporarily surrenders compute resources to threads on sibling strands. Of course this helps avoid intra-core performance interference. On the SPARC T2 our preferred busy-waiting idiom was "RD %CCR,%G0" which is a high-latency no-nop. The T4 provides a dedicated and extremely useful WRPAUSE instruction. The processor architecture manuals are the authoritative source, but briefly, WRPAUSE writes a cycle count into the the PAUSE register, which is ASR27. Barring interrupts, the processor then delays for the requested period. There's no need for the operating system to save the PAUSE register over context switches as it always resets to 0 on traps. Digressing briefly, if you use unbounded spinning then ultimately the kernel will preempt and deschedule your thread if there are other ready threads than are starving. But by using a spin-then-block strategy we can allow other ready threads to run without resorting to involuntary time-slicing, which operates on a long-ish time scale. Generally, that makes your application more responsive. In addition, by blocking voluntarily we give the operating system far more latitude regarding power management. Finally, I should note that while we have OS-level facilities like sched_yield() at our disposal, yielding almost never does what you'd want or naively expect. Returning to WRPAUSE, it's natural to ask how well it works. To help answer that question I wrote a very simple C/pthreads benchmark that launches 8 concurrent threads and binds those threads to processors 0..7. The processors are numbered geographically on the T4, so those threads will all be running on just one core. Unlike the SPARC T2, where logical CPUs 0,1,2 and 3 were assigned to the first pipeline, and CPUs 4,5,6 and 7 were assigned to the 2nd, there's no fixed mapping between CPUs and pipelines in the T4. And in some circumstances when the other 7 logical processors are idling quietly, it's possible for the remaining logical processor to leverage both pipelines. Some number T of the threads will iterate in a tight loop advancing a simple Marsaglia xor-shift pseudo-random number generator. T is a command-line argument. The main thread loops, reporting the aggregate number of PRNG steps performed collectively by those T threads in the last 10 second measurement interval. The other threads (there are 8-T of these) run in a loop busy-waiting concurrently with the T threads. We vary T between 1 and 8 threads, and report on various busy-waiting idioms. The values in the table are the aggregate number of PRNG steps completed by the set of T threads. The unit is millions of iterations per 10 seconds. For the "PRNG step" busy-waiting mode, the busy-waiting threads execute exactly the same code as the T worker threads. We can easily compute the average rate of progress for individual worker threads by dividing the aggregate score by the number of worker threads T. I should note that the PRNG steps are extremely cycle-heavy and access almost no memory, so arguably this microbenchmark is not as representative of "normal" code as it could be. And for the purposes of comparison I included a row in the table that reflects a waiting policy where the waiting threads call poll(NULL,0,1000) and block in the kernel. Obviously this isn't busy-waiting, but the data is interesting for reference. _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } _td { border: 1px green solid; } _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } Aggregate progress T = #worker threads Wait Mechanism for 8-T threadsT=1T=2T=3T=4T=5T=6T=7T=8 Park thread in poll() 32653347334833483348334833483348 no-op 415 831 124316482060249729303349 RD %ccr,%g0 "pause" 14262429269228623013316232553349 PRNG step 412 829 124616702092251029303348 WRPause(8000) 32443361333133483349334833483348 WRPause(4000) 32153308331533223347334833473348 WRPause(1000) 30853199322432513310334833483348 WRPause(500) 29173070315032223270330933483348 WRPause(250) 26942864294930773205338833483348 WRPause(100) 21552469262227902911321433303348

Read the article

OpenGL (glx) not working with ubuntu 12.10

- by user26766

It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

Read the article

Moving from Tortoise to TFS

- by MarkPearl

The Past A few years ago my small software company made the jump from storing code on a shared folder to source code control. At the time we had evaluated a few of the options and settled on Tortoise SVN. The main motivation for going the SVN route was that we found a great plugin for Visual Studio that allowed us to avoid the command prompt for uploading changes (like I said we are windows programmers… command prompt bad!! ) and it was free. Up to now we have been pretty happy with SVN as it removed many of the worries that I had about how safe my code was on a shared folder and also gave us the opportunity to safely have several developers work on the same project at the same time. The only times when we have been unhappy has been when we have had SVN hell days – which pretty much occur when you are doing something out of the norm and suddenly SVN just won’t resolve conflicts or something along those lines. This happens once every 4 or 5 months and is not necessarily a problem caused directly by SVN – but a problem augmented by SVN. When you have SVN hell days you want to curse SVN! With that in mind I recently have been relooking at our source code control. I have explored using GIT and was very impressed by it and have also looked at TFS. From a source code control perspective I don’t want to get into a heated discussion on which one is better – but I do want to mention that I wear two hats in my organization – software developer & manager, and with the manager hat on I tend to sway the TFS route. So when I was given a coupon to test DiscountASP.Net Team Foundation Server Service for a year, I thought it was the perfect opportunity to try TFS in a distributed environment and also make the first step towards having an integrated development management system. Some of the things that appeal to me about DiscountASP’s offering are the following… Basic management / planning facilities like to do lists inside Visual Studio Daily backup of data on the server – we are developers, not IT managers and so the more of this I could outsource the better Distributed solution – all of us work remotely and so this was a big one as well. Registering and Setting Up with DiscountASP.NET The whole registration process was simple and intuitive. The web interface is not the most visually impressive one, but it is functional and a few seconds after I clicked the last submit button a email was sitting in my inbox giving me my control panel username and suggesting that I read the “Getting Started” article. The getting started article was easy to read and understand so no complaints there either. Next to set my dev environment to work. With a few references to the getting started article I had completed the whole setup process in a matter of minutes. Ten minutes after initiating the whole thing I was logged into VS2010 and creating my first TFS project. With the service that I signed up for, I have access for 5 users – which is sufficient for my internal needs. So from what I can tell, to set the rest of us up on the system I just need to supply them with their user credentials and url. My Concerns Resolved 1) Security So, a few concerns I had about the service. First and foremost – is it secure? I would hate for someone to get access to our code and the whole idea of putting it up on the internet is a concern for me. Turning to the Knowledge Base on the DiscountASP website this is one of the first question I can see answered. According to them it is secure. I have extracted their comment below regarding this. Our TFS hosting service is secure. We only accept HTTPS connections ensuring that any client-server data transmission is encrypted. At the network level, all of our systems are protected by multiple Juniper firewalls, Tipping Point's Intrusion Detection System (see Tipping Point's case study of our use here), and we also employ DDoS mitigation to add extra layers of security. Additionally, physical access to the servers is tightly restricted. Please see the security section of this Knowledge Base article for further details. 2) Web Portal Access The other big concern I have is regarding web portal access. In the ideal world I would like to be able to give my end users access to a web portal for reporting bugs etc. When I initially read through the FAQ of the site it mentioned that there was web portal access – but from what I can see this is just for “users”. Since I am limited to 5 users for the account, it would not be practical to set up external users that we could get feedback from on bugs etc. I would be interested if this is possible – and if so if someone could post it in the comments it would be much appreciated. If this isn’t possible, it is a slight let down as we rely heavily on end user feedback to get feedback and it would have been ideal to have gotten this within the service. Other than those two items, I didn’t have any real concerns that were unresolved. So where do I go from here? So time passed by from the initial writing of this post and as work whirred in and out of my inbox I have still not had a proper opportunity to give the service a test run. Recently though things have began to slow down and then surprise surprise I had another SVN Hell day. With that experience I had a new found resolve to get our team on TFS and so today we are going to start to use the service as a team. I am hoping that I do not have TFS hell days – but if I do, I will be sure to write about them. In short - the verdict is still out on whether this service is going to be invaluable to my business or whether it will create more headaches than it is worth BUT I am hopping it will be an invaluable service. I will only really be able to determine that in a few months… till then!

Read the article

HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

- by Marek L.

I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

Search Results

Search found 15661 results on 627 pages for 'protected mode'.

Page 567/627 | < Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574 | Next Page >

- by Daniel Mortimer

- by asantaga

- by Your DisplayName here!

- by venkatx5

- by user61262

- by Vitus

- by [email protected]

- by Elton Stoneman

- by user12587121

- by Pavel Bucek

- by user60622

- by wcoekaer

- by cibrax

- by cibrax

- by MarkPearl

- by Martin Hinshelwood

- by mortezam

- by MrLane

- by C SD

- by Steve Michelotti

- by noah

- by Dave

- by user26766

- by MarkPearl

- by Marek L.

< Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574 | Next Page >