Search Results

Search found 16472 results on 659 pages for 'computer scientist'.

Page 569/659 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

• AVCHD MTS h264 1080p file with choppy playback in Linux

  - by marc

  When I'm trying play video files from my camera: Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 50.00 (50/1) Input #0, mpegts, from '00027.MTS': Duration: 00:00:38.88, start: 2.884289, bitrate: 16945 kb/s Program 1 Stream #0.0[0x1011]: Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 50 fps, 50 tbr, 90k tbn, 50 tbc Stream #0.1[0x1100]: Audio: ac3, 48000 Hz, stereo, s16, 256 kb/s … on my Linux computer (Ubuntu 12.04), I get choppy playback. It's completly unusable... I tried: Totem VLC mplayer The result is always same issue. I sent the same video file to a friend who has ubuntu 10.04 to test, and he also has the same issue. He has Windows 7, and confirms that on Windows, the video work well. I have an Intel® Core™2 CPU 6300 @ 1.86GHz × 2 with GF 9600 GT, with closed NVIDIA drivers. This is not any kind of issue with big files playing slow from an HDD issue. I have an SSD drive! I spent the last days and nights, trying hundreds of commands for ffmpeg, handbrake, mencoder... Any of them won't let me create a file with enough quality. I downloaded few movies from YouTube in 1080p, and playback worked well without any big pixels and choppiness. I would like have highest possible quality, I will put following files onto a Blu-ray disk so I don't need to compress them to get a smaller size. I just want smoth playback on my Linux box. On Windows, the same file is working well.

  Read the article

• Acer LCD says "no signal"

  - by Ken

  I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

  Read the article

• 5GHz vs 2.4GHz dual band router, max mbps

  - by Tallboy

  I've done a fair amount of reading before posting this but there are a few things still unclear. I just bought a Netgear WNDR3700 N600. I understand that 5GHz offers more channels, less interference because of more available channels, wont interfere with a microwave and so on, and also has a shorter range. Currently, my router is broadcasting both signals (for my iPhone on 2.4, and my computer on 5) But my question is What is the max speed of 5GHz in mbps? In the router settings, it allows me to set '300mbps', but I keep reading online that the max is 54. Is this true? I noticed when I set up the router the default for 2.4 was set to 300 and the default for 5 was set to 54, so I changed both to 300. Is this fine as well? I don't see why it wouldn't be maxed out for both by default. On the box it says max rate of 300+300 so I assume this is correct, but it's throttled down so the router isn't stressing in case you have something streaming media 24/7 and slowing the internet down too. What is the max range of 5GHz? my apt is 780 square feet, and the router is in the main living room.

  Read the article

• How can I restore "Open With" context menu item in Windows 7?

  - by Izzy Helianthus

  I tried various way to fix this problem but ended up with a dead end. My problem would be the missing "Open With" context menu items (or subitems?). It did not appear even though I hovered it for a minutes or two. Below is a screenshot of the respective right-click menu. Note: The only problem with "Open With" is at the right-click menu (as well as FILE menu). Edited: The "Open With" context submenu that only accessible at the top, while the typical right click menu doesn't work. Repaste from Comment. I don't think it's involved with any windows files because other user in the same computer doesn't affected at all. I can see the "Open With" context submenu. I believe this must have involved with current user's registry. It happens to all files (any file types, except folder). I can only use Open With by clicking at the file and select it manually at the top of Explorer window. (Refer to the link for the screenshot)

  Read the article

• Cannot browse remote networks even with WINS configured

  - by paradroid

  As the NetBIOS protocol acts on Layer 2 and so is not routable, In order to enable network browsing of remote networks, WINS has been installed and configured on two domain controllers, both of which are on different networks. The WINS servers seem to be replicating with eachother, and each has 127.0.0.1 set as the Primary WINS Server in each of their LAN interface properties, with nothing entered for Secondary WINS Server. The DC which holds the PDC Emulator FSMO role has the Computer Browser service running and set to Auto start, and it has the WINS/NBT node type network setting at 0x8 (H-node - Hybrid node). Remote network browsing does not work. Is the WINS/NBT node type correct for this scenario? The reason why I think it may not be the right one is because I set the DHCP Server's 046 WINS/NBT node type option to 0x8 as well, after which the DHCP clients started to disappear from the Network folders. When that option is not set, does it default to B-node (Broadcast node)? Or could it be a problem with the WINS servers setup?

  Read the article

• Can I disable this Windows (XP) Security Warning?

  - by FumbleFingers

  I recently reformatted my hard drive and reinstalled Windows XP (I know I'll have to take the plunge and commit to Win8 "real soon, now", but I'm just not quite ready for the upheaval yet! :) I used to use WinRar (and later, when I got fed up with the "nag" messages, 7-Zip), but I haven't installed either of them in my new configuration, so I must be using the built-in XP facility when I open *.zip files. For years, I've been opening downloaded *.zip archives, and using "drag & drop" to copy to a File Explorer window open on the folder where I want the files to end up (usually, My Documents\Downloads). But now I find that when I "drop" the file(s), I get a pop-up Windows Security Warning saying Are you sure you want to copy or move files to this folder? You should only move or copy files from locations that you trust Can anyone explain why I'm getting this message, and is there any (reasonably easy, please! :) way to suppress it? Since I've already put the *.zip file on my computer, it seems a bit late to ask if I trust it. (Thus far, the files in question have always been plain text, so it's not a matter of dodgy programs, etc.) Apologies for the low quality image - I don't have the appropriate tools or knowledge to do any better, and it doesn't help that my "PrtScr" screen capture has included what would have been on my second monitor (TV) if it had been turned on. If you can't read it, trust me - I have copied the text verbatim.

  Read the article

• How can I uninstall Broadcom Bluetooth software that won't disappear in Windows XP?

  - by T. Webster

  My situation is similar to this question for Windows 7, except my OS is Windows XP SP3. I have recently realized I made the mistake of buying a Bluetooth adapter and installing the Broadcom/Widcomm Bluetooth stack driver software. Now that I know that the software is no good, I want to uninstall it. Then I'll install the Toshiba stack for the Cirago adapter. Right now, when I double-click on the setup.exe file that came with the Cirago driver, nothing happens (it doesn't start setup). I've attempted to uninstall all Bluetooth driver software in Device Manager, and I don't see any remnants of any Bluetooth drivers there. But I do see that the little Bluetooth icon still persists: I don't see anything about Bluetooth, Broadcom, or Widcomm in Add/Remove Programs. I don't see any folder names Broadcom or Widcomm in Program Files folder, either. But I do see that Broadcom does show up in the registry with respect to Bluetooth, as shown here. I also renamed every file in C:\Windows\inf that starts with "bth" so that it ends with ".old". What should I do now to completely wipe this persistent Broadcom Bluetooth software off my computer?

  Read the article

• Why is my global security group being filtered out of my logon token?

  - by Jay Michaud

  While investigating the effects of filtered tokens on my file permissions, I noticed that one of my global security groups is being filtered in addition to the regular system-defined filtered groups. My Active Directory environment is a single-domain forest on the Windows Server 2003 functional level. I'll call the domain "mydomain.example.com". I am logged onto a Windows Server 2008 Enterprise Edition machine (not a domain controller) as a member of the "MYDOMAIN\Domain Admins" group and the "MYDOMAIN\MySecurityGroup" global security group (among others). When I run "whoami /groups" from an elevated command prompt, I see the full list of groups to which my account belongs as expected. When I run "whoami /groups" from a regular, non-elevated command prompt, I see the same list of groups, but the following groups are described as "Group used for deny only". BUILTIN\Administrators MYDOMAIN\Schema Admins MYDOMAIN\Offer Remote Assistance Helpers MYDOMAIN\MySecurityGroup Numbers 1 through 3 above are expected based on Microsoft documentation; number 4 is not. The "MYDOMAIN\MySecurityGroup" global security group is a group that I created. It contains three non-built-in global security groups, and these security groups contain only non-built-in user accounts. (That is, I created all of the accounts and groups that are members of the "MYDOMAIN\MySecurityGroup" global security group.) There are other, similar groups of which my account is a member that are not being filtered out of my logon token, and this group is not granted any specific user rights in the security settings of this computer or in Group Policy. What would cause this one group to be filtered out of my logon token?

  Read the article

• CPU-adaptive compression

  - by liori

  Hello, Let assume I need to send some data from one computer to another, over a pretty fast network... for example standard 100Mbit connection (~10MB/s). My disk drives are standard HDD, so their speed is somewhere between 30MB/s and 100MB/s. So I guess that compressing the data on the fly could help. But... I don't want to be limited by CPU. If I choose an algorithm that is intensive on CPU, the transfer will actually go slower than without compression. This is difficult with compressors like GZIP and BZIP2 because you usually set the compression strength once for the whole transfer, and my data streams are sometimes easy, sometimes hard to compress--this makes the process suboptimal because sometimes I do not use full CPU, and sometimes the bandwidth is underutilized. Is there a compression program that would adapt to current CPU/bandwidth and hit the sweet spot so that the transfer will be optimal? Ideally for Linux, but I am still curious about all solutions. I'd love to see something compatible with GZIP/BZIP2 decompressors, but this is not necessary. So I'd like to optimize total transfer time, not simply amount of bytes to send. Also I don't need real time decompression... real time compression is enough. The destination host can process the data later in its spare time. I know this doesn't change much (compression is usually much more CPU-intensive than decompression), but if there's a solution that could use this fact, all the better. Each time I am transferring different data, and I really want to make these one-time transfers as quick as possible. So I won't benefit from getting multiple transfers faster due to stronger compression. Thanks,

  Read the article

• Why do my backup fail when I target a network share hosted by a Synology DS211 disk station?

  - by Larry

  My backups are failing when I try to use a network share hosted by a Synology DS211 disk station. They work fine if I target a different network share (i.e. \server1\data\larry). When I run the following command: Wbadmin start backup -backupTarget:\\diskstation\backup-larry -include:C: This is what I get: wbadmin 1.0 - Backup command-line tool (C) Copyright 2004 Microsoft Corp. Note: The backed up data cannot be securely protected at this destination. Backups stored on a remote shared folder might be accessible by other people on the network. You should only save your backups to a location where you trust the other users who have access to the location or on a network that has additional security precautions in place. Retrieving volume information... This will back up volume WIN7(C:) to \\diskstation\backup-larry. Do you want to start the backup operation? [Y] Yes [N] No y Note: The list of volumes included for backup does not include all the volumes that contain operating system components. This backup cannot be used to perform a system recovery. However, you can recover other items if the destination media type supports it. The backup operation to \\diskstation\backup-larry is starting. Creating a shadow copy of the volumes specified for backup... Creating a shadow copy of the volumes specified for backup... The backup operation stopped before completing. Summary of the backup operation: ------------------ The backup operation stopped before completing. Detailed error: Access is denied. Windows Backup failed to write the file: '<backup location>\WindowsImageBackup\<Computer Name>\MediaId'. Access is denied. The backup creates the following path \\diskstation\backup-larry\WindowsImageBackup\LARRY-MYDOMAIN\ but its empty. I definitely have read/write access on the target directory (\diskstation\backup-larry). I have verified this by looking at the permission and by actually copying files to this location. Any suggestions?

  Read the article

• Home server hard drive: 186k start-stop cycles in 325 days?

  - by j-g-faustus

  I set up a home server about a year ago, using Ubuntu server (10.04 LTS at the moment), four disks in RAID 5 for storage (WD Green 1.5 TB) and a laptop drive for the OS. Today the output of smartctl, a command line utility for checking the SMART attributes of a hard drive, tells me that the primary OS drive has had no less than 186,000 start-stop cycles in 325 days and may be nearing the end of its lifespan. The smartctl output is in "normalized values", in this case a number between 200 and 000, where 200 is "brand new" and 000 means "worn out". My disk gets 001. So I wonder what happened: 186k start/stop cycles in 7820 hours is about one start/stop per 2.5 minutes around the clock. This seems somewhat excessive for a computer that sees actual use once or twice per day. (The RAID disks are normal, averaging to one start/stop per day, as expected.) Does anyone have similar experiences, or pointers to what might be the issue here? Specifically I'd like to know Why the massive start/stop count? Do I have some sort of configuration issue? Could there be a background service that is causing trouble? Could having a laptop disk as the OS drive be part of the problem? Can anyone confirm or deny this? Here is the /etc/hdparm.conf configuration /dev/sda { apm = 127 spindown_time = 120 } and the most relevant parts of smartctl --attributes /dev/sda: smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 185875 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 7820 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 118 118 000 Old_age Always - 246833 194 Temperature_Celsius 0x0022 107 098 000 Old_age Always - 36 As I generally prefer my drives to last more than a year, any advice is appreciated.

  Read the article

• Question about malware-sites: How can I be in danger?

  - by juanmaflyer

  Hi people!! My english is horrible but i will do the best to be as accurate as posible. I have been reading here (in superuser) some questions about the necessity of antivirus software in Windows and some doubts arise. As far as i know (and imagine) virus software can only be harmful if I download any type of infected executable file and then I RUN IT. I mean that if i have the infected executable in my desktop but i leave it there for years without clicking it, I won't be in danger... My question is: How can i be in danger browsing the so called "malware pages or sites"??. If i am just browsing an "infected site" how could I be affected by a virus. In any moment the browser is asking me for the permission to download "something", so how could it be?? Although i don't give permission to the browser to download 'something' is data being downloaded to my computer?? Its some kind of cookie? I will ask in another way... What is the level of riskiness if i get inffected in a malware site compared with the level of an executable virus?? Thanks a lot!

  Read the article

• What would cause my Windows machine to seize?

  - by Coltin

  I run Windows XP SP2 on a Desktop I built (I know that doesn't provide much, but I can't say "on a Dell X103938R" or something). It has 'seized' about 7 times in its year and a half life. Everything freezes. I can't move the mouse cursor and the keyboard seems unresponsive. I can turn the monitor on and off and it will hold the last image. The light for the mouse is responsive if I move it. The keyboard lights change when pressed (cap locks, etc). I've waited upto ten minutes for a change, nothing. I haven't connected any activity to the seizing. It's happened when all I was "running" were fullscreen programs (games), just checking email, or once when I was sitting at my desktop (I was reading a book and when I tried to use the mouse, nothing). I've never been able to figure it out. I have to hard reset, and then its fine. It doesn't file system check or anything (not sure if Windows does that). No error when I load up the computer, nothing. If I had uTorrent open, it will have to recheck the torrent files to make sure they weren't corrupted though. (It's not always open when it seizes either). I'm using an AMD Athlon 5400+ with a NVidia GeForce 8600 GT, if that helps. I'm using two hard drives, 500Gb Wester Digital with a 1Tb Hitachi.

  Read the article

• Cannot access firewalled jboss server from Internet Explorer

  - by Simon Gibbs

  I've produced a website for a client One Single Menu using JBoss and hosted it on Rackspace Cloud Servers running Ubuntu's Maverick Meerkat. Following advice, I esablished some iptables rule to protect jboss: iptables -I INPUT 1 -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -t nat -A OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -A INPUT -j DROP Now, several versions of IE on several computers on at least two different ISPs cannot access the onesinglemenu.com. Curl from within the datacenter, Firefox, and Safari on the same ISPs can all access the server fine. I even tried IE and Firefox on the same computer and IE failed but Firefox worked. The error behaviour is that IE hangs on connecting without reporting an error, even after a minute or so. No page is displayed at all. I find it quite odd that I'm having a browser specific connection issue, but it appears to be the case. Help!

  Read the article

• Access router set up as a bridge behind another router

  - by Alari Truuts

  I have a problem my ISP is refusing to help me with, even though they put up the whole system. Specifications: There's a Thomson TG784 router through which the internet comes in to the building, Behind that (for some reason) is a Juniper NetScreen 5XT - 105 Firewall/Router? which leads to an AMX nxa-enet24 switch that carries the connections all over the building and a series of Apple AirPorts for wifi. Problem: The first router (Thomson) is required for ipTV (by Elion). The tv or ipTV box has to be connected straight to the Thomson router. My service provider cannot see the Thomson router from their side, but see the Juniper, so we might think the Thomson has been configured as a bridge. I need a way to access the Thomson router and see it's configurations, because currently, when connecting a Samsung tv to that router (with elion app for ipTV viewing) or even a computer, it cannot access the internet and even if it could, it would update the Thomson router software, losing it's configurations which I need to preserve. I'm unable to find out the Thomson routers ip address to connect to it, and when directly conencting with a cat5 cable, it doesn't give me an ip address. Hope someone can show me the correct direction for solving my issue. Thank you all for reading, and I appreciate any help, Alari Truuts

  Read the article

• Download JDK onto a remote server

  - by itsadok

  I want to get the latest JDK onto a server in a remote location. Downloading the JDK from Sun's website requires jumping through all kinds of hoops until you actually get the file. I'm not sure exactly if they use cookies or my IP address, but simply copying the file URL and trying wget on the server doesn't work. Googling for mirrors of the JDK, I could only find old versions. Right now I'm left with the option of downloading it into my computer, then uploading it to the server. This feels slow and stupid. Anyone got a better idea? EDIT: Thanks for all the replies. Just to clarify, as I'm writing this I'm rsyncing the 78MB file to my server. It should be done in about an hour, so it's not such a big deal. However, since this is not the first time I'm doing this, I was hoping for a better solution for next time. Solution: What I ended up doing was sudo aptitude install lynx-cur www-browser http://java.sun.com/javase/downloads/ From there it's mostly using the arrow and enter keys, and answering "Yes" to a lot of lynx security questions (about cookies and certificates). Thanks to resonator.

  Read the article

• Recovering a damaged microSDHC

  - by djechelon

  I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

  Read the article

• Trying to delete directory with "rm -rf", but get message that it's not empty

  - by Ben Hocking

  I've tried deleting a directory using "rm -rf" and I'm getting the message "Directory not empty": Bens-MacBook-Pro:please benjaminhocking$ ls -lart empty_directory/ total 16 drwxr-xr-x 5 benjaminhocking staff 170 Aug 27 14:46 . drwxr-xr-x 3 benjaminhocking staff 102 Aug 27 15:28 .. Bens-MacBook-Pro:please benjaminhocking$ rm -rf empty_directory/ rm: empty_directory/: Directory not empty Bens-MacBook-Pro:please benjaminhocking$ rmdir empty_directory/ rmdir: empty_directory/: Directory not empty If I try the same thing using Finder (dragging the folder to the Trash), I get the message The operation can’t be completed because the item “empty_directory” is in use. I've tried doing xattr -d com.apple.quarantine, purely out of superstition, but it did no good. A probably important piece of context is that this directory was initially in a directory that should've been deleted by a "make clean" command I issued prior to Terminal locking up on me, after which a little over half of the other programs I had running also locked up, including Skype, and eventually the OS itself. I ended up having to reboot the computer by pressing and holding the power key. Edit to add: Another important piece of information I left off was that this was happening in an encrypted folder à la encfs. I was able to track down the corresponding folder in the encrypted side of things and delete it there. I still don't know why I couldn't do it from the decrypted side of things like I normally do. I'll leave this unanswered for now in case anyone has a good answer for that.

  Read the article

• Unable to remove Read-Only attribute from folder in Windows XP

  - by elcuco

  I have this directory which I cannot remove the read only attribute from. The computer is running XP SP2 (or SP3, not sure) and the directory sits in a NTFS file system. Looking into the web I found this: http://support.microsoft.com/kb/256614 which tells that if the directory is "customized" it's treated as a system folder and thus "read only". I don't think this is a scenario in my case, but anyway it's not helping, their recommendation is more or less: attr -r -s /d /s d:\data and this is not working for me. Any other ideas? More info: The directory is served to an HTTP server (wamp) and the directory is an SVN check out. What happens is that the web server cannot write files into the directory (imagechace from drupal is you are really interested). Edit 2: The original post claimed that the directory sits on a VFAT FS, however I booted Fedora 11 from livecd and the partition is marked as NTFS. Edit 3: I left the company which I worked on, on which this situation happened... so I cannot fully close this question. But things get even worse: I tested the "attr -r" answer I put, it did not work for me, and now the developer said that it worked for her. A nice WTF moment. Probably a reboot helped... Sorry for loosing details. If anyone has the same problem, and one of the answers helps him - please comment.

  Read the article

• Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

  - by Matt

  I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

  Read the article

• Bypass proxy authentication [closed]

  - by Diego Queiroz

  My scenario: My network has a proxy that requires interative authentication. When I access any URL, an username and password is requested to enable navigation. I do have a valid username/password (this means I have permissions to access external content). I do not have access to the proxy server (any change to the proxy server is not an option). What I need: I need to bypass the interative authentication process and make it an automated authentication process. What I do NOT need/want: I do not need/want to hack the network. I do not need/want to access unauthorized content. In other words, I just need to find a way to "save" my password in the computer (security is not a problem) to allow application that does not support this kind of interative authentication to access the internet (like non-browser software that also uses HTTP port). My guess: My guess is to develop a new proxy server that will run in the local machine (eg, a proxy for the network proxy). This proxy server will access my network proxy, authenticate and forward the content. Of course this is a last resort. I prefer to not need to develop a proxy server. Does someone know other solution? (any operating system)

  Read the article

• Building a PC for Work and play? [closed]

  - by Derek Organ

  Ok, Its been a long time since I build my own PC so I'm looking to get back into it again and build a new one. First off budget is about €800 excluding the monitor and windows 7 licence and mouse. (just bought a new g500) I plan on using my computer for work, lots of applications open at once but none particularly excessive (photoshop being the most demanding, mostly coding tools) I also use it for some gaming, e.g. COD, Starcraft etc. One thing I do want to do eventually is get a really good monitor with hight resolution and maybe 27" so the graphics card needs to be able to make best use of that. So a few questions 1) Is the bottle neck in performance mostly still the harddrives? 2) Aren't most processors e.g. i5 etc even i3 so far a head of other bottlenecks it makes litte difference the higher you go. Isn't the Graphics card dealing with heavy graphics so what really slows because of a slow CPU? So from this my thinking is to get a SSD drive as my primary drive for OS etc and have loads of memory e.g. 6-8GB and a decent mid level graphics card? It doesn't seem at my level worth spending much on CPU and any other parts really. I basic parts off the top of my head Case, Motherboard CPU SSD Drive SATA Drive Power Supply Memory Cooling (fan?) Graphics Card Network Card Keyboard DVD drive Mouse Windows Monitor Am I missing anything? Any helpful tips or general education much appreciated. Thanks, Derek

  Read the article

• Resotre single users Exchange 2003 mailbox from backup

  - by Campo

  I take weekly backups of exchange in full. I also take complete weekly backups of the entire server. It is a Server 2003 R2 with AD and Exchange 2003 all on one box. One users inbox has disappeared. She has 19000+ junk items now. It is possible the inbox got mixed into the junk. Regardless it is such a huge mess she is not going to go through all of that.... I want to restore he mailbox from the backup. I followed this MS KB http://support.microsoft.com/kb/823176 I had to use Method 3. I have a VM of Server 2003 R2 with exchange but I am having failures on the restore from NT backup. The backup log just states to check the application log.... Application log points to backup log... Only info Is failed to restore Only thing different is the computer name... The only error I can find is in the Applicaiton log. Information Store Database not found All others just say that the backup failed. Any assistance is greatly appreciated.

  Read the article

• SQL Server 2008 Cluster Installation - First network name always fails

  - by boflynn

  I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

  Read the article

• With no password expire notification at logon in Windows 7, how are you configuring password expire

  - by J. L.

  To my understanding, Windows 7 users do not receive password expiration notification during the logon process - it occurs strictly from the system tray. We currently have tray balloon notifications disabled to lessen user distraction, and I expect the password change process is a smoother one during the logon process rather than in an existing session. As a result, users will get prompted to change their passwords at expiration. The users also connect to Terminal Services boxes, but receive the advanced notification for password expiration there. So, Windows 7 is not notifying, but TS/RDS and XP boxes are. Any guidance on configuring this? Personally, I would turn off all expiration notices, but I understand most users would prefer to see the notification. Thoughts? Any GPO or other settings I might be overlooking? The interactive logon setting below is already enabled for our Win7 workstation GPO. My thought is balloon notifications will get turned back on for Windows 7, but I wanted to see if anyone was aware of alternatives. Thanks. Computer Configuration\Windows Settings\Security Settings\Local Policies - Security Options Interactive logon: Prompt user to change password before expiration

  Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >