Search Results

Search found 24172 results on 967 pages for 'mongodb update'.

Page 569/967 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576 | Next Page >

13.10 doesn't boot on Vaio Pro 13

- by vaioonbuntu

I just installed Ubuntu 13.10 on my new Vaio Pro 13, disabled safe mode, but used UEFI and not legacy mode. I did an encrypted LVM installation and erased the complete SSD. It booted just fine from USB, but after installation it doesn't boot. The Vaio failed boot screen appears. I then tried this advice here: 13.10 on vaio pro with UEFI sadly it fails for me with "/usr/sbin/grub-probe: error: failed to get canonical path of /cow." I then tried mounted the encrypted partition with Nautilus and tried this: Cannot update grub with paramters on live USB With /dev/sda2 and then to install GRUB to /dev/sda. Didn't succeed and warned me that the "GPT partition label contains no BIOS Boot Partition; embedding won't be possible" What do i have to do, go fix GRUB and be able to boot my finished install? Here's my Boot Repair Log: http://paste.ubuntu.com/6386598/ I would really appreciate any help, I'm so happy to finally be able to ditch my big fat Macbook Pro and use Ubuntu on my new, light Vaio Pro, if only I could fix GRUB. best, x

Read the article
If USB is not listed in BIOS as a boot option, does that mean the machine can't boot from USB?

- by Chace Fields

I just purchased an Asus Zenbook Prime UX31A-DH51 with Windows 8. I want to wipe the drive and do a clean install but USB is not listed as a boot option in the BIOS. Does this mean it is not possible? Here is a photo of my BIOS options. This is the only option I get when I click Add New Boot Option. Not sure if I can add USB here. * Update * Asus tech emailed and said: "Unfortunately with Windows 8 you can not boot from bios."

Read the article
HP DL370 G6 expansion

- by user72185

Hi, we are running a HP DL370 server with 6 x 300 gb disks on RAID 5. Due to a Windows update causing our server to fail recently, we couldn't access the data. I now want to separate the data from the OS (Windows server 2008 r2) so that if anything like that happens again, we can route everyone through a separate server. I have seen these HP storageworks enclosures (msa70) and have a couple of questions: Can I just take out our 2.5 inch 10k SAS drives, install them in the new Storageworks NAS and hey presto we would be up and running? If I wanted to then add another drive (I think there are 25 bays), can I just insert a blank but identical drive and the RAID 5 would dynamically expand to incorporate the new drive. Many thanks Adrian

Read the article
How do you manage updates without a staging environment: CentOS 6.3

- by Gregg Leventhal

I am managing about 20 servers, many of them virtual. They are almost all different purpose, and none are clustered. I have a distributed LAMP stack, a few application servers, some build servers, a few KVM hosts. They are CentOS 6.3 mostly with a few Ubuntu (unfortunately). I don't have the resources to setup a staging environment where I can have duplicates of my machines and test updates before rolling them out. I am taking file backups. What I want to know is how you are approaching backing up your Linux systems. I assume you don't just do yum update, but then how are you choosing the packages worthy of updating? When (if ever) are you updating the kernel, etc.. How do you test updates without a staging environment? Snapshot and hope for the best?

Read the article
Account Listings on APress and O'Reilly

- by TATWORTH

Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/20/e-books-from-apress-and-oreilly.aspxIn recent days both APress and O'Reilly have radically improved the way they display items registered against your account with them.APress now show only one line per e-book and the multitude of formats is handled by a drop-down list. The result is that the list of APress books I have bought now requires less paging through. The only things that the APress lacks are:The ability to show all on the page (currently options for 10,20 and 50 per page)The ability to sort on title or date bought or date updatedO'Reilly have always shown the formats available by a series of hyperlinks along one line. They have improved their list as follows:You can sort on title or date bought or date updatedClicking on a line shows full detail of the item (include image, download details, errata link and catalog page). Clicking again collapses the detail.You can select all your purchased items together or just show E-Books or Print or VideosNow why is the date updated important? Updates are issued for various books (particularly those made available whilst still being written) - the publishers very kindly email you when an update is available but finding it in the list to download it again is not as easy as you think, however sort on release date and they are easy to find!

Read the article
Find computer names on a private network (with nmap?)

- by paracaudex

On a LAN, I want to find out the names of all the connected computers using a cross-platform program, preferably nmap. I know I can do nmap -sn xxx.xxx.xxx.xxx/24 (where xxx.xxx.xxx.xxx is a local IP address) to find hosts which are up, but how do I find the computers' hostnames? Do they broadcast this in a way that I can find using nmap? UPDATE: It looks like Angry IP Scanner can do this. How does it do this? Can I replicate it with nmap?

Read the article
Grant account write access to specific attributes on Active Directory User object

- by Patricker

I am trying to allow an account to update very specific attributes on all User objects. I am setting this security on the "User" object. When I add the account on the security tab, go to advanced, edit the accounts permissions, and start going through the list of attributes I am only able to find a few, like First Name, but most of the attributes I want to let them write to are missing. How can I grant the account write access to these attributes? Attributes I need to grant permission for: First Name (givenName) Last Name (sn) Initials (initials) Department (department) Company (company) Title (title) Manager (manager) Location Info (physicalDeliveryOfficeName, streetAddress, postOfficeBox) Work Phone (telephoneNumber) Pager (pager) IP Phone (ipPhone) IP Phone Other (otherIpPhone) ThumbnailLogo (thumbnailLogo) jpegPhoto (jpegPhoto) Description (displayName) Thanks

Read the article
OPN Solutions Catalog Goes Mobile

- by Meghan Fritz-Oracle

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Good news for our partners on this sunny Tuesday! Oracle PartnerNetwork is pleased to announce the launch of a mobile-ready OPN Solutions Catalog. Features include: A fluid search and browse experience regardless of device (phone, tablet, or desktop) Streamlined design and reorganized search facets, making it easier for customers to search and browse for partner profiles and their solutions The OPN Solutions Catalog is a free marketing tool for all active Oracle PartnerNetwork members. If you are an OPN partner… take advantage of it! To learn more about the new catalog, watch the Solutions Catalog Training which includes best practices and a demo on how to update your profile. Spend a few minutes with our experts to learn how you can expand your market reach and showcase your offerings to our customers, partners, and Oracle employees worldwide.Questions? Visit the Solutions Catalog Resource page or contact the Partner Business Center.

Read the article
how to make a continuous machine gun sound-effect

- by Jan

I am trying to make an entity fire one or more machine-guns. For each gun I store the time between shots (1.0 / firing rate) and the time since the last shot. Also I've loaded ~10 different gun-shot sound-effects. Now, for each gun I do the following: function update(deltatime): timeSinceLastShot += deltatime if timeSinceLastShot >= timeBetweenShots + verySmallRandomValue(): timeSinceLastShot -= timeBetweenShots if gunIsFiring: displayMuzzleFlash() spawnBullet() selectRandomSound().play() But now I often get a crackling noise (which I assume is when two or more guns are firing at the same time and confuse the sound-device). My question is whether A) This a common problem and there is a well-known solution, maybe to do with the channels or something, or B) I am using a completely wrong approach to the task. I had a look at some sound-assets for other games and they used complete burst with multiple shots. I suppose I could try that, but I would like to have organic little hickups in the gun-fire (that's what the random value is for) to make the game more gritty and dirty. I am using Panda3D, but I had the exact same problem in PyGame and SDL. [edit] Thanks a lot for the answers so far! One more problem with faking it though: Now how do I stop the sound? Let's say I have an effect with 5 bangs... *bang* *bang* *bang* *bang* *bang* And I magically manage to loop it so that there's no gap or overlap if the player fires more than 5 shots. Now, what do I do if the player stops firing halfway through the third bang? How do I know how long to keep playing the sample so that the third bang is completed and I can start playing the rumbling echo of the last shot? Of course I can look up the shot/pause timing of that sound-sample and code accordingly, but it feels extremely hacky.

Read the article
Choppy USB mice on just one of USB ports

- by user20532

I've got Lenovo b560 laptop with latest, properly updated Kubuntu on it (11.04 natty, kernel 2.6.38-8-generic). It has three USB2.0 ports onboard. I usually plug a mouse into one of them (I've got 3 different mice - in office, at home and for when on the go). Sometimes, usually after laptop awakening from sleep, the mouse still works but cursor movements are choppy, as if the processor was extremely loaded (it's usually not). I found that if I re-plug the mouse cord into the other USB port, it works just fine. If I plug it back to problematic port, it is still choppy and remains choppy until next boot. Of course I want my mice to always work fine. Problem is: I cannot reproduce this behavior for sure, it happens sporadically but regularly. I use different USB ports (problem has ever happened on each of them since), I use different mice (each has failed me this way at least once), I cannot generally find what exactly is going wrong and why plugging to different port fixes the mouse instantly. So I'd like to hear at least clues where to look at, what to try to identify my problem. A bit of update: while beginning this post, I had the issue once again. I have just replugged the mouse back to problematic port and it is not recognized at all. On the other port it works smoothly.

Read the article
How to access a fake raid?

- by maaartinus

I have a fake raid, which I wanted to access using mdadm /dev/md0 -A -c 128 -l stripe --verbose /dev/sda /dev/sdc which should be right, as far as I understand the man page. But I get the message mdadm: option -l not valid in assemble mode leaving the offending option out leads to mdadm: failed to create /dev/md0 and (despite verbose) no more information. I'm assuming that -A requires some mdadm-specific header which is obviously missing. I probably need to use "build" instead of assemble, but from the description I'm really unsure whether this is a non-destructive operation. Is it? What should I exactly do? UPDATE I see I haven't made clear, that the array already exists as a fake-raid (I can't give the details about my mainboard now). It looks like doing nothing except for interleaving blocks, so I hoped it could be easily done using mdadm, too. Maybe I'm completely wrong, but all the info I've found was concerned with booting from fake-raid, what I don't really need. I'd be happy with a read access for now.

Read the article
Safe BIOS upgrade run from external USB-HDD and not native OS

- by ecoologic

I have a Toshiba M200 laptop which came with Windows Vista. After buying it, I replaced the OS with XP and recently I swapped the internal hard disk with a bigger one where I only have Ubuntu. So now I can boot XP from the external USB hard disk. There's a BIOS update available (2.3 against my 1.8) which I'd like to install and there's also a version for XP. Is it "reasonably" safe to install this upgrade for Windows XP (despite the original OS was Vista, the laptop model is the right one) from my external USB hard disk with Win XP?

Read the article
Building own kernel on ubuntu

- by chris

Hi, I'm trying to build my own kernel, as I want to write a kernel program which I need to compile into the kernel. So what did I do? Download from kernel.org, extract, do the make menuconfig and configure everything as needed, do a make, do a make modules_install, do a make install and finally do a update-grub. Result: It doesn't boot at all.... Now I had a look here and it describes a different way of compiling a kernel. Could this be the reason whz my way did not work? Or does anyone else have an idea why my kernel doesn't work? ######## Edit Great answer, ty. Oli. But I tried it the old fashioned way, and after one hour of compiling I got this message: install -p -o root -g root -m 644 ./debian/templates.master /usr/src/linux-2.6.37.3/debian/linux-image-2.6.37.3meinsmeins/DEBIAN/templates dpkg-gencontrol -DArchitecture=i386 -isp \ -plinux-image-2.6.37.3meinsmeins -P/usr/src/linux-2.6.37.3/debian/linux-image-2.6.37.3meinsmeins/ dpkg-gencontrol: error: package linux-image-2.6.37.3meinsmeins not in control info make[2]: *** [debian/stamp/binary/linux-image-2.6.37.3meinsmeins] Error 255 make[2]: Leaving directory `/usr/src/linux-2.6.37.3' make[1]: *** [debian/stamp/binary/pre-linux-image-2.6.37.3meinsmeins] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.37.3' make: *** [kernel-image] Error 2

Read the article
Electricsheep Not Working in Raring 13.04

- by Nhoeh37

I just downloaded Electricsheep four days before I updated my Ubuntu software and I fell in love with it. After I upgraded to 13.04, I'm kind of upset in saying that Electricsheep no longer works. I have no idea how to fix it and I feel helpless with Linux. As I said, it was working completely fine in 12.10, but now with the Raring Ringtail update: I use Xscreensaver to launch Electricsheep. When I open Xscreensaver, "Electricsheep" is one of the options to choose. When I "preview" ES or even launch the "xscreensaver-demo" in the terminal, it doesn't work anymore; I get an error message. The error message says: "detected another electric sheep process. rendering of sheep is disabled using read only access." Damnit, can someone please help me? I want my trippy screensaver back, it shouldn't be this hard! EDIT: I contacted the creator of Electricsheep (Scott Draves) via the link to his email address on his personal website and asked for his assistance. Hopefully the Askubuntu community will be able to fix this problem, I'm sure I am not the only one who is having this problem as I have searched and searched.

Read the article
Likeliness of obtaining same IP address after restarting a router

- by ?affael

My actual objective is to simulate logged IPs of web-site users who are all assumed to use dynamically assigned IPs. There will be two kinds of users: good users who only change IP when the ISP assignes a new one bad users who will restart their router to obtain a new IP So what I would like to understand is what assignment mechanics are usually at work here deciding from what pool of IPs one is chosen and whether the probability is uniformly distributed. I know there is no definite and global answer as this process can be adjusted be the ISP but maybe there is something like a technological frame and common process that allows some plausible assumptions. UPDATE: A bad user will restart the router as often as possible if necessary. So here the central question is how many IP changes on average are necessary to end up with a previously used IP.

Read the article
How to get Visual Studio 2010 Express Edition on Windows 7

- by thanigai

Visual studio 2010 is an amzing release from Microsoft. I have tried the beta 1,2 of Visual Studio 2010 and finally the full version is released. I am also interested in the latest edition of Windows which nothing but our Windows 7. Next to Vista I like this version very much. Out of curiosity I have installed the prebuild version of Windows 7. I tried installing the express edition here and it failed making me disappointed. I tried two or three times and finally I decided to download the trial version of Windows 7. After that I can install the Visual Studio 2010 express edition easily. I have given the link below from where I have downloaded the file. http://www.microsoft.com/express/downloads/ Here the link give is through Web PI Installer. Other option is you can download the ISO image file and burn them to a disc or use a virtual disc This Visual Web developer will provide the Sql Server engine alone. To get a Sql Server Management Studio get from the following link http://www.microsoft.com/express/Database/InstallOptions.aspx That's it all the things necessary for the web application programming is ready. Ah I forget to tell about the Silverlight. Please find the Silverlight 4 latest tools from the below link (WCF RIA services is the main update) http://www.silverlight.net/getstarted/ Silverlight 4 Tools(http://www.microsoft.com/downloads/details.aspx?FamilyID=eff8a0da-0a4d-48e8-8366-6ddf2ecad801&displaylang=en) Expression Blend 4 trial(http://www.microsoft.com/downloads/details.aspx?FamilyID=88484825-1b3c-4e8c-8b14-b05d025e1541&displaylang=en) I think the reader would have enjoyed on how to get these things. Please let me know if you are not clear with any of these things. Thanks, Thani

Read the article
GeoTrust SSL brand name used by re-sellers

- by Christopher

I feel like a I got the bait-and-switch from my web host provider since they advertise "GeoTrust SSL" for $99. I purchased it, thinking the certificate is issued from geotrust.com, but then I get an email from Comodo saying they are providing it. My host provider says they get a discount by using Comodo. I purchased the certificate with the understanding it would be issued by GeoTrust. I called the host provider and they said they usually expect it from GeoTrust, but someone from email support responded saying the product name is "GeoTrust SSL" but they use Comodo to get a discount. I think this is bogus and unfair trade practice. However, searching for "GeoTrust" on google brings up a ton of websites selling "GeoTrust" certificates. How can companies get away with this? Since the host provider is part of BBB I plan to inform my host to update the purchase page on their website to state clearly that... "This certicate is provided at a discount and may be issued by a provider other than GeoTrust.com, such as Comodo.com" Any feedback on this is appreciated.

Read the article
Count function on tree structure (non-binary)

- by Spevy

I am implementing a tree Data structure in c# based (largely on Dan Vanderboom's Generic implementation). I am now considering approach on handling a Count property which Dan does not implement. The obvious and easy way would be to use a recursive call which Traverses the tree happily adding up nodes (or iteratively traversing the tree with a Queue and counting nodes if you prefer). It just seems expensive. (I also may want to lazy load some of my nodes down the road). I could maintain a count at the root node. All children would traverse up to and/or hold a reference to the root, and update a internally settable count property on changes. This would push the iteration problem to when ever I want to break off a branch or clear all children below a given node. Generally less expensive, and puts the heavy lifting what I think will be less frequently called functions. Seems a little brute force, and that usually means exception cases I haven't thought of yet, or bugs if you prefer. Does anyone have an example of an implementation which keeps a count for an Unbalanced and/or non-binary tree structure rather than counting on the fly? Don't worry about the lazy load, or language. I am sure I can adjust the example to fit my specific needs. EDIT: I am curious about an example, rather than instructions or discussion. I know this is not technically difficult...

Read the article
How can I copy the output from a remote command into the local clipboard?

- by cwd

I use iTerm2 as my terminal client in Mac OS X. On the local system I can use pbcopy and pbpaste to transfer data between the system clipboard and the terminal, but of course this doesn't work when you're ssh'ed to another machine. Is there some way which I can take the result of a command and copy it to the clipboard automatically? Perhaps an applescript to grab the text on the iTerm windows, then get the next to last line? For instance, if I wanted to copy the current working directory: I run pwd, then use the mouse to select the text, and then press command + c. Is there any better / faster / automatic way of doing this? I'm not looking for a bulletproof solution that would work for every command (eg: might not work when there is a huge scrollback) - I'm just looking for something to make this task that I do quite often a little less tedious. Update I'm looking into using screen to do this, but I'm still not sure if it is possible.

Read the article
Terminal/Putty showing control characters (^M) after updating

- by jaycee48

I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

Read the article
Ubuntu 10.04 hung on unattended apt-get upgrade?

- by hafichuk

I'm looking into why our ubuntu web server hung this morning and see that there was some package upgrades a few hours prior to the problem. I was able to ssh into the system and get a snapshot from top: top - 08:13:54 up 210 days, 8:25, 2 users, load average: 433.30, 422.40, 375.70 Tasks: 1192 total, 381 running, 810 sleeping, 0 stopped, 1 zombie Cpu(s): 0.5%us, 6.1%sy, 0.0%ni, 93.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 49549772k total, 48518392k used, 1031380k free, 960152k buffers Swap: 11595768k total, 279368k used, 11316400k free, 39355664k cached This is a 16 processor system, so I would typically expect a load in the low teens. I tried to restart apache, which didn't work, and subsequently had to do a hard reboot to get it working again (which it is). One thing I found was that the server did an unattended package update. Is it possible that upgrading php or curl (which our web sites use) might have caused apache to stop responding? Here is the snip from the unattended-upgrades.log from this morning: 2012-09-18 06:48:30,076 INFO Initial blacklisted packages: 2012-09-18 06:48:30,076 INFO Starting unattended upgrades script 2012-09-18 06:48:30,077 INFO Allowed origins are: ["['Ubuntu', 'lucid-security']"] 2012-09-18 06:49:37,017 INFO Packages that are upgraded: gnupg-curl php5-dev linux-server dhcp3-common linux-libc-dev php5-curl gpgv gnupg linux-headers-server linux-image-server php5 php5-mysql php-pear php5-cli php5-common libapache2-mod-php5 dhcp3-client 2012-09-18 06:49:37,018 INFO Writing dpkg log to '/var/log/unattended-upgrades/unattended-upgrades-dpkg_2012-09-18_06:49:37.017909.log'

Read the article
Why is my DB read-only when attached to SQL Express, but not with SQL Web?

- by David Rubin

I have an .mdf/.ldf pair, originally created in 2008 R2 Standard, and well under 10GB, with ACLs: d:\db snapshot\DB_NAME.mdf SERVERNAME\SQLServerMSSQLUser$ACCOUNT$MSSQLSERVER:F OWNER RIGHTS:F BUILTIN\Administrators:F d:\db snapshot\DB_NAME_log.ldf SERVERNAME\SQLServerMSSQLUser$ACCOUNT$MSSQLSERVER:F OWNER RIGHTS:F BUILTIN\Administrators:F When I attach the database to an instance of SQL Express 2008 R2, it comes up as read-only. When exactly the same acls and user-accounts and SQLCMD statements are set up with SQL Web 2008 R2, it comes up writable. I looked at MSDN's comparison page but nothing jumped out at me. Why on earth is this happening? Thanks! UPDATE I just noticed that the name of the attached databases are different. On SQL Express (read-only) it matches the filename (e.g. DB_NAME); on SQL Web (writable) it matches the CUSTOM_NAME that I gave it in the attach command: CREATE DATABASE [CUSTOM_NAME] ON (FILENAME = 'PATH_TO_MDF'), (FILENAME = 'PATH_TO_LDF') FOR ATTACH

Read the article
Antenna Aligner Part 6: Little Robots

- by Chris George

A week ago I took temporary ownership of a HTC Desire S so that I could start testing my app under Android. Support for Android was not in my original plan, but when Nomad added support for it recently, I starting thinking why not! So with some trepidation, I clicked the Build for Android button on the Nomad toolbar... nothing. Hmm... that's not right, I was expecting something to build. After a bit of faffing around I finally realised that I hadn't read the text on the Android setup page properly (yes that's right, RTFM!), and I needed a two-part application identifier, separated by a dot. I did this (not sure what the two part thing is all about, that one my list to investigate!) After making the change, the Android build worked and created the apk file. I uploaded this to the device and nervously ran it... it worked!!! Well, more or less! So, there was not splash screen, but this was no surprise because I only have the iOS icons and splash screen in my project at the moment. What was more concerning was the compass update didn't seem to be working. I suspect this is a result of using an iOS specific option in the Phonegap compass watcher. Another thing to investigate. I've also just noticed that the css gradient background hasn't worked either... These issues aside, it was actually more successful than I was expecting, so happy days! Right, lets get Googling... Next time: Preparing for submission to the App Store! :-)

Read the article
First Shard for SQL Azure and SQL Server

- by Herve Roggero

That's it!!!!! It's ready to go and be tested, abused and improved! It requires .NET 4.0 and uses some cool technologies, like caching (the new System.Runtime.Caching) and the Task Parallel Library (System.Threading.Tasks). With this library you can: Define a shard of 1, 2 or 100 SQL databases (a mix of SQL Server and SQL Azure) Read from the shard in parallel or sequentially, and cache resultsets Update, Delete a record from the shard Insert records quickly in the shard with a round-robin load Reset the cache You can download the source code and a sample application here: http://enzosqlshard.codeplex.com/ Note about the breadcrumbs: I had to add a connection GUID in order for the library to know which database a record came from. The GUID is currently calculated on the fly in the library using some of the parameters of the connection string. The GUID is also dynamically added to the result set so the client can pass it back to the library. I am curious to get your feedback on this approach. ** Correction from my previous post: this is a library for a Horizontal Partition Shard (HPS): tables are split across databases horizontally. So in essence, the tables need to have the same schema across the databases.

Read the article
How do I prevent home folder files and folder from showing on the desktop as icons in Linux Mint 15?

- by N Rahl

I have a fresh install of Mint 15 with Cinnamon and I can't find an option to hide all icons on the desktop. In settings-Desktop there are only options to show/hide the home folder, trash, etc, but no option to hide the contents of the "Desktop" folder. How do I hide the $HOME folder contents from appearing on the desktop in Linux Mint 15? UPDATE: It actually looks like the icons on the desktop are the contents of the $HOME folder, not $HOME/Desktop. ** Question was edited to reflect the fact that it was the user's home folder icons showing, not just "my computer", "trash", etc.

Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576 | Next Page >