ask - Page 57 - Developer IT

how to install nginx after removed it manually

- by april

I have installed nginx using app sudo apt-get install software-properties-common sudo add-apt-repository ppa:nginx/stable sudo apt-get install software-properties-common sudo apt-get update apt -get install nginx Than I use whereis "nginx" and remove all files manually (rm) now i wanna re-install nginx but its not work it was return error awk: cannot open /etc/nginx/nginx.conf (No such file or directory) i create /etc/nginx/nginx.conf then use apt-get install nginx its complete install but not work

Read the article

help! corrupt file recovery

- by TheBumpper

My supervisor computer crashed last night, and I'm trying to help him out. He made an R script but when he tried to open it, it was empty. But for some reason the file is 7.9kb so it should not be empty i think... anyway when i tried to open it, Gedit gave this error: "The file you opened has some invalid characters. If you continue editing this file you could corrupt this document. You can also choose another character encoding and try again." and the options to encode the characters. It looked like this(with a red background): \00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\ My question is, is there a way to restore the file? i hope someone has a brilliant idea

Read the article

Can't make AWUS036H work in Ubuntu 12.10

- by sfrj

I am using 64 bit Ubuntu 12.10. This is my kernel version: Linux 3.5.0-19-generic #30-Ubuntu SMP Tue Nov 13 17:48:01 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux My wireless card is an AWUSU36H The first thing I do to install the driver is copy the driver from the CD to the Downloads folder. cd /media/me/AWUS036H/Drivers/RTL8187L/Unix (Linux)/Linux driver for kernel 2.6.X$ cp rtl8187_linux_26.1025.0328.2007.tar.gz ~/Downloads/ Then I extract the tar tar xvfz rtl8187_linux_26.1025.0328.2007.tar.gz I navigate into the extracted folder, and I try to follow the instructions in the Readme.txt cd rtl8187_linux_26.1025.0328.2007 This are the contents of the folder: drv.tar.gz makedrv stack.tar.gz wlan0rmv ieee80211 ReadMe.txt wlan0dhcp wlan0up ifcfg-wlan0 rtl8187 wlan0down wpa_supplicant-0.4.9 This is what the Readme.txt says: Release Date: 2006-02-09, ver 1.2^M RTL8187 Linux driver version 1.2^M ^M --This driver supports RealTek RTL8187 Wireless LAN driver for ^M Fedora Core 2/3/4/5, Debian 3.1, Mandrake 10.2/Mandriva 2006, ^M SUSE 9.3/10.1/10.2, Gentoo 3.1, etc.^M - Support Client mode for either infrastructure or adhoc mode^M - Support WEP and WPAPSK connection^M ^M < Component >^M The driver is composed of several parts:^M 1. Module source code^M stack.tar.gz^M drv.tar.gz^M ^M 2. Script ot build the modules^M makedrv^M ^M 3. Script to load/unload modules^M wlan0up^M wlan0down ^M ^M 4. Script and configuration for DHCP^M "ReadMe.txt" [readonly] 140 lines, 4590 characters So what I do know is extract both of the compressed files: sudo tar xvfz drv.tar.gz sudo tar xvfz stack.tar.gz This 2 commands will add some data to the folders ieee80211 and rtl8187 At this point I get lost, and I don't know what to do. If I go in each of this 2 folders and I run the sudo make command then I get errors like this one: sudo makemake -C /lib/modules/3.5.0-19-generic/build M=/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187 modules make[1]: Entering directory `/usr/src/linux-headers-3.5.0-19-generic' CC [M] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187_core.o In file included from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187_core.c:64:0: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187.h:29:26: fatal error: linux/config.h: No such file or directory compilation terminated. make[2]: *** [/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187_core.o] Error 1 make[1]: *** [_module_/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-19-generic' make: *** [modules] Error 2 If I try to run any of the script ./makedrv that the instructions describe, then I also get an error: ~/Downloads/rtl8187_linux_26.1025.0328.2007$ sudo ./makedrv [sudo] password for me: ieee80211/ ieee80211/license ieee80211/ieee80211_crypt.c ieee80211/ieee80211_tx.c ieee80211/ieee80211_softmac.c ieee80211/ieee80211_softmac_wx.c ieee80211/ieee80211_module.c ieee80211/ieee80211_crypt_ccmp.c ieee80211/ieee80211_rx.c ieee80211/tags ieee80211/ieee80211_crypt_tkip.c ieee80211/Makefile ieee80211/readme ieee80211/.tmp_versions/ ieee80211/.tmp_versions/ieee80211-rtl.mod ieee80211/.tmp_versions/ieee80211_crypt_wep-rtl.mod ieee80211/.tmp_versions/ieee80211_crypt_tkip-rtl.mod ieee80211/.tmp_versions/ieee80211_crypt-rtl.mod ieee80211/.tmp_versions/ieee80211_crypt_ccmp-rtl.mod ieee80211/ieee80211_crypt_wep.c ieee80211/ieee80211.h ieee80211/ieee80211_wx.c ieee80211/ieee80211_crypt.h rtl8187/ rtl8187/license rtl8187/r8180_rtl8225z2.c rtl8187/r8180_rtl8225.h rtl8187/r8187_led.c rtl8187/r8180_93cx6.h rtl8187/r8180_wx.h rtl8187/r8180_hw.h rtl8187/copying rtl8187/r8187_led.h rtl8187/r8180_pm.h rtl8187/tags rtl8187/r8187.h rtl8187/Makefile rtl8187/r8180_rtl8225.c rtl8187/readme rtl8187/install rtl8187/.tmp_versions/ rtl8187/.tmp_versions/r8187.mod rtl8187/changes rtl8187/r8180_wx.c rtl8187/r8180_pm.c rtl8187/r8187_core.c rtl8187/r8180_93cx6.c rtl8187/authors rtl8187/ieee80211.h rtl8187/ieee80211_crypt.h rm -f *.mod.c *.mod *.o .*.cmd *.ko *~ rm -rf /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/tmp make -C /lib/modules/3.5.0-19-generic/build M=/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211 modules make[1]: Entering directory `/usr/src/linux-headers-3.5.0-19-generic' CC [M] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.o In file included from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17:0: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:1019:24: error: field ‘ps_task’ has incomplete type /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_softmac_scan_wq’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:421:2: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type [enabled by default] In file included from include/linux/srcu.h:32:0, from include/linux/notifier.h:15, from /usr/src/linux-headers-3.5.0-19-generic/arch/x86/include/asm/uprobes.h:26, from include/linux/uprobes.h:35, from include/linux/mm_types.h:15, from include/linux/kmemcheck.h:4, from include/linux/skbuff.h:18, from include/linux/if_ether.h:134, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:26, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17: include/linux/workqueue.h:371:12: note: expected ‘struct delayed_work *’ but argument is of type ‘struct work_struct *’ /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_softmac_stop_scan’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:495:3: warning: passing argument 1 of ‘cancel_delayed_work’ from incompatible pointer type [enabled by default] In file included from include/linux/srcu.h:32:0, from include/linux/notifier.h:15, from /usr/src/linux-headers-3.5.0-19-generic/arch/x86/include/asm/uprobes.h:26, from include/linux/uprobes.h:35, from include/linux/mm_types.h:15, from include/linux/kmemcheck.h:4, from include/linux/skbuff.h:18, from include/linux/if_ether.h:134, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:26, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17: include/linux/workqueue.h:410:20: note: expected ‘struct delayed_work *’ but argument is of type ‘struct work_struct *’ /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_associate_abort’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:915:2: warning: passing argument 2 of ‘queue_delayed_work’ from incompatible pointer type [enabled by default] In file included from include/linux/srcu.h:32:0, from include/linux/notifier.h:15, from /usr/src/linux-headers-3.5.0-19-generic/arch/x86/include/asm/uprobes.h:26, from include/linux/uprobes.h:35, from include/linux/mm_types.h:15, from include/linux/kmemcheck.h:4, from include/linux/skbuff.h:18, from include/linux/if_ether.h:134, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:26, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17: include/linux/workqueue.h:371:12: note: expected ‘struct delayed_work *’ but argument is of type ‘struct work_struct *’ /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_rx_frame_softmac’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:1527:3: error: implicit declaration of function ‘tasklet_schedule’ [-Werror=implicit-function-declaration] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_stop_protocol_rtl’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2120:2: warning: passing argument 1 of ‘cancel_delayed_work’ from incompatible pointer type [enabled by default] In file included from include/linux/srcu.h:32:0, from include/linux/notifier.h:15, from /usr/src/linux-headers-3.5.0-19-generic/arch/x86/include/asm/uprobes.h:26, from include/linux/uprobes.h:35, from include/linux/mm_types.h:15, from include/linux/kmemcheck.h:4, from include/linux/skbuff.h:18, from include/linux/if_ether.h:134, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:26, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17: include/linux/workqueue.h:410:20: note: expected ‘struct delayed_work *’ but argument is of type ‘struct work_struct *’ /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_softmac_init’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2229:78: error: macro "INIT_WORK" passed 3 arguments, but takes just 2 /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2229:2: error: ‘INIT_WORK’ undeclared (first use in this function) /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2229:2: note: each undeclared identifier is reported only once for each function it appears in /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2230:88: error: macro "INIT_WORK" passed 3 arguments, but takes just 2 /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2231:94: error: macro "INIT_WORK" passed 3 arguments, but takes just 2 /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2232:96: error: macro "INIT_WORK" passed 3 arguments, but takes just 2 /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2233:82: error: macro "INIT_WORK" passed 3 arguments, but takes just 2 /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2234:82: error: macro "INIT_WORK" passed 3 arguments, but takes just 2 /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2244:2: error: implicit declaration of function ‘tasklet_init’ [-Werror=implicit-function-declaration] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_softmac_free’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2255:2: warning: passing argument 1 of ‘cancel_delayed_work’ from incompatible pointer type [enabled by default] In file included from include/linux/srcu.h:32:0, from include/linux/notifier.h:15, from /usr/src/linux-headers-3.5.0-19-generic/arch/x86/include/asm/uprobes.h:26, from include/linux/uprobes.h:35, from include/linux/mm_types.h:15, from include/linux/kmemcheck.h:4, from include/linux/skbuff.h:18, from include/linux/if_ether.h:134, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:26, from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17: include/linux/workqueue.h:410:20: note: expected ‘struct delayed_work *’ but argument is of type ‘struct work_struct *’ /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: In function ‘ieee80211_wpa_set_encryption’: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2489:3: error: implicit declaration of function ‘request_module’ [-Werror=implicit-function-declaration] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2518:3: error: implicit declaration of function ‘try_module_get’ [-Werror=implicit-function-declaration] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c: At top level: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2663:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2663:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2663:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2664:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2664:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2664:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2665:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2665:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2665:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2666:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2666:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2666:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2667:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2667:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2667:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2668:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2668:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2668:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2669:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2669:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2669:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2670:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2670:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2670:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2671:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2671:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2671:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2672:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2672:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2672:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2673:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2673:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2673:1: warning: parameter names (without types) in function declaration [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2674:1: warning: data definition has no type or storage class [enabled by default] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2674:1: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ [-Wimplicit-int] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:2674:1: warning: parameter names (without types) in function declaration [enabled by default] In file included from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.c:17:0: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211.h:1212:37: warning: ‘netdev_priv’ is static but used in inline function ‘ieee80211_priv’ which is not static [enabled by default] cc1: some warnings being treated as errors make[2]: *** [/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211/ieee80211_softmac.o] Error 1 make[1]: *** [_module_/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/ieee80211] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-19-generic' make: *** [modules] Error 2 rm -f *.mod.c *.mod *.o .*.cmd *.ko *~ rm -rf /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/tmp make -C /lib/modules/3.5.0-19-generic/build M=/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187 modules make[1]: Entering directory `/usr/src/linux-headers-3.5.0-19-generic' CC [M] /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187_core.o In file included from /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187_core.c:64:0: /home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187.h:29:26: fatal error: linux/config.h: No such file or directory compilation terminated. make[2]: *** [/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187/r8187_core.o] Error 1 make[1]: *** [_module_/home/me/Downloads/rtl8187_linux_26.1025.0328.2007/rtl8187] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-19-generic' make: *** [modules] Error 2 Can somebody give me a hand finding out what I need to do to make my wifi card work? Update This is the output of the lsusb command lsusb Bus 003 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Read the article

Ubuntu 13.10 unity won't load from this morning

- by user287957

I turned on my pc this morning and unity will not load at all. I have tried loading it manually using ctrl+alt+f1 and all i got from it was the following:- compiz (core) - Info: Loading plugin: core compiz (core) - Info: Starting plugin: core compiz (core) - Info: Loading plugin: ccp compiz (core) - Info: Starting plugin: ccp compizconfig - Info: Backend : gsettings compizconfig - Info: Integration : true compizconfig - Info: Profile : unity compiz (core) - Info: Loading plugin: composite compiz (core) - Info: Starting plugin: composite compiz (core) - Info: Loading plugin: opengl compiz (core) - Info: Starting plugin: opengl libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/r600_dri.so failed (/usr/lib/x86_64- linux-gnu/dri/r600_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/r600_dri.so failed (${ORIGIN}/dri/r600_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/r600_dri.so failed (/usr/lib/dri/r600_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: r600_dri.so libGL error: driver pointer missing libGL error: failed to load driver: r600 libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/swrast_dri.so failed (${ORIGIN}/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast compiz (core) - Info: Loading plugin: compiztoolbox compiz (core) - Info: Starting plugin: compiztoolbox compiz (core) - Info: Loading plugin: decor compiz (core) - Info: Starting plugin: decor compiz (core) - Info: Loading plugin: copytex compiz (core) - Info: Starting plugin: copytex compiz (core) - Info: Loading plugin: snap compiz (core) - Info: Starting plugin: snap compiz (core) - Info: Loading plugin: resize compiz (core) - Info: Starting plugin: resize compiz (core) - Info: Loading plugin: gnomecompat compiz (core) - Info: Starting plugin: gnomecompat compiz (core) - Info: Loading plugin: move compiz (core) - Info: Starting plugin: move compiz (core) - Info: Loading plugin: place compiz (core) - Info: Starting plugin: place compiz (core) - Info: Loading plugin: mousepoll compiz (core) - Info: Starting plugin: mousepoll compiz (core) - Info: Loading plugin: regex compiz (core) - Info: Starting plugin: regex compiz (core) - Info: Loading plugin: imgpng compiz (core) - Info: Starting plugin: imgpng compiz (core) - Info: Loading plugin: vpswitch compiz (core) - Info: Starting plugin: vpswitch compiz (core) - Info: Loading plugin: grid compiz (core) - Info: Starting plugin: grid compiz (core) - Info: Loading plugin: animation compiz (core) - Info: Starting plugin: animation compiz (core) - Info: Loading plugin: expo compiz (core) - Info: Starting plugin: expo compiz (core) - Info: Loading plugin: session compiz (core) - Info: Starting plugin: session compiz (core) - Info: Loading plugin: wall compiz (core) - Info: Starting plugin: wall compiz (core) - Info: Loading plugin: fade compiz (core) - Info: Starting plugin: fade compiz (core) - Info: Loading plugin: unitymtgrabhandles compiz (core) - Info: Starting plugin: unitymtgrabhandles compiz (core) - Info: Loading plugin: ezoom compiz (core) - Info: Starting plugin: ezoom compiz (core) - Info: Loading plugin: workarounds compiz (core) - Info: Starting plugin: workarounds compiz (core) - Info: Loading plugin: scale compiz (core) - Info: Starting plugin: scale compiz (core) - Info: Loading plugin: unityshell compiz (core) - Info: Starting plugin: unityshell WARN 2014-06-03 10:55:31 unity.glib.dbus.server GLibDBusServer.cpp:586 Can't register object 'com.canonical.Autopilot.Introspection' yet as we don't have a connection, waiting for it... WARN 2014-06-03 10:55:31 unity.glib.dbus.server GLibDBusServer.cpp:586 Can't register object 'com.canonical.Unity.Debug.Logging' yet as we don't have a connection, waiting for it... compiz (unityshell) - Error: GL_ARB_vertex_buffer_object not supported compiz (core) - Error: Plugin initScreen failed: unityshell compiz (core) - Error: Failed to start plugin: unityshell compiz (core) - Info: Unloading plugin: unityshell X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 18 (X_ChangeProperty) Resource id in failed request: 0x4000006 Serial number of failed request: 9909 Current serial number in output stream: 9913 It was all working fine yesterday but this morning there was nothing. Please help Many Thanks

Read the article

Boot failure on installation from a burned iso image

- by jdamae

I'm encountering boot failure while trying to install a Linux distro from a CD. I'm using an older PC; here are its specs: HP Pavilion a255c 2.66GHz CPU, 512MB RAM with a BIOS revision of 6/30/2003 I reclaimed an older drive (Seagate ST340810A) that seems to be working, as it's recognized in the BIOS (auto-detected). So this is not the original HDD, but a replacement. I downloaded a mini.iso of Ubuntu 10.10 that I want to install, and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM]. I disabled devices 2-4 so I can just force it to read first from the CD-ROM. This old PC also has a separate CD writer which is a Sec.Slave. The Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned Linux CD. With these settings I cannot get it to boot. I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" when I start the pc with the cd (burned iso image). Would I be able to boot off a usb flash drive? Would that work?

Read the article

system overrides my mount parameters in /etc/fstab

- by valya

[.../~]$ mount /dev/sda4 on / type ext4 (rw,commit=60,commit=0) [.../~]$ cat /etc/fstab # UNCONFIGURED FSTAB FOR BASE SYSTEM UUID=70739c04-fcb6-4747-803c-824f9c894f41 / ext4 defaults,commit=60 0 1 What can I do about it? It seems strange. I want to be able to set any commit time I want Edit: added /proc/mounts contents [.../~]$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=886332k,nr_inodes=221583,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/disk/by-uuid/70739c04-fcb6-4747-803c-824f9c894f41 / ext4 rw,relatime,barrier=1,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 /dev/sda3 /media/megahard fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 cgroup /dev/cgroup/cpu cgroup rw,relatime,cpu,release_agent=/usr/local/sbin/cgroup_clean 0 0 gvfs-fuse-daemon /home/va1en0k/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0

Read the article

Blender has weird fuzzy misbehaving icon in launcher

- by TreefrogInc

I got Blender 2.58 (stable) from blender.org (downloaded the package, extracted it). Everything works fine, but the only thing that bugs me is that the icon in the launcher (when I open it) is really fuzzy. I guess that's no big deal, but when I select "Keep in Launcher" and close Blender, the icon doesn't work when I try to open it again. Then, I created a Launcher on my desktop with the path to the blender executable, slapped on a shiny new non-fuzzy .svg icon that came with the package, and dragged the (desktop) Launcher to my (Unity) Launcher. Now, when I click on the new launcher, it keeps showing the flashing thing that says it's opening the program, and then the old fuzzy icon comes back but doesn't replace the new icon. Even after Blender opens, the new icon is still flashing. What is wrong with my launcher?

Read the article

Can't add Fedora 14 to grub.

- by Dananjaya

Today I installed Fedora 14 in a different partition in the same hard drive as Ubuntu. At the Fedora 14 installation, I chose not to install Boot-loader in the MBR, and instead chose to install it in the Fedora partition itself, which is according to my HD layout /sda3. After the Fedora 14 installation I booted in to Ubuntu and ran sudo update-grub but 'grub.cfg' fails to add Fedora 14 in to the OS list. Here is the output of boot-info script. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sda3: __________________________________________________________________________ File system: ext4 Boot sector type: Grub Legacy Boot sector info: Grub Legacy (v0.97) is installed in the boot sector of sda3 and looks at sector 49897340 on boot drive #1 for the stage2 file. A stage2 file is at this location on /dev/sda. Stage2 looks on partition #3 for /grub/grub.conf. Operating System: Boot files: /grub/menu.lst /grub/grub.conf sda4: __________________________________________________________________________ File system: LVM2_member Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 49,865,759 49,863,712 83 Linux /dev/sda2 74,866,686 78,163,967 3,297,282 5 Extended /dev/sda5 74,866,688 78,163,967 3,297,280 82 Linux swap / Solaris /dev/sda3 49,866,752 50,890,751 1,024,000 83 Linux /dev/sda4 50,890,752 74,864,639 23,973,888 8e Linux LVM "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 03e2a8da-171f-49e9-b24d-434e66cd1140 ext4 /dev/sda3 dea81d77-a375-4d0e-954e-1829f6b91f10 ext4 /dev/sda4 mzVoj0-GHJu-DJr4-0G2Y-SzZ0-LTfW-F01yf9 LVM2_member /dev/sda5 3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,user_xattr,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="2" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=1024x768 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sda,msdos1)' search --no-floppy --fs-uuid --set=root 03e2a8da-171f-49e9-b24d-434e66cd1140 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation # Commented out by Dropbox # UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3e89ba8e-7754-4ee4-aca1-e2a82bffb7a7 none swap sw 0 0 UUID=03e2a8da-171f-49e9-b24d-434e66cd1140 / ext4 errors=remount-ro,user_xattr 0 1 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 0.065803528 = 0.070656000 boot/grub/core.img 1 21.263332367 = 22.831329280 boot/grub/grub.cfg 1 0.771381378 = 0.828264448 boot/initrd.img-2.6.31-wl 1 2.054199219 = 2.205679616 boot/initrd.img-2.6.32-21-generic 3 2.893260956 = 3.106615296 boot/initrd.img-2.6.35-28-generic 2 6.833232880 = 7.337127936 boot/initrd.img-2.6.38-8-generic 2 1.772453308 = 1.903157248 boot/vmlinuz-2.6.32-21-generic 2 2.068012238 = 2.220511232 boot/vmlinuz-2.6.35-28-generic 1 5.532531738 = 5.940510720 boot/vmlinuz-2.6.38-8-generic 1 6.833232880 = 7.337127936 initrd.img 2 2.893260956 = 3.106615296 initrd.img.old 2 5.532531738 = 5.940510720 vmlinuz 1 2.068012238 = 2.220511232 vmlinuz.old 1 ============================= sda3/grub/grub.conf: ============================= -------------------------------------------------------------------------------- # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,2) # kernel /vmlinuz-version ro root=/dev/mapper/VolGroup-lv_root # initrd /initrd-[generic-]version.img #boot=/dev/sda3 default=0 timeout=0 splashimage=(hd0,2)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.35.6-45.fc14.i686) root (hd0,2) kernel /vmlinuz-2.6.35.6-45.fc14.i686 ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet initrd /initramfs-2.6.35.6-45.fc14.i686.img -------------------------------------------------------------------------------- =================== sda3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 23.792903900 = 25.547436032 grub/grub.conf 1 23.792903900 = 25.547436032 grub/menu.lst 1 23.793020248 = 25.547560960 grub/stage2 1 23.817364693 = 25.573700608 initramfs-2.6.35.6-45.fc14.i686.img 2 23.787566185 = 25.541704704 initrd-plymouth.img 1 23.791228294 = 25.545636864 vmlinuz-2.6.35.6-45.fc14.i686 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda2 00000000 81 71 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.qb.....MC:.....| 00000010 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000020 5d 56 50 ff a1 94 89 ff 81 70 62 ff 81 70 62 ff |]VP......pb..pb.| 00000030 81 70 62 ff 81 70 62 ff 81 70 62 ff a1 94 89 ff |.pb..pb..pb.....| 00000040 4d 43 3a ff fa f2 ec ff fb f6 f1 ff fc f8 f4 ff |MC:.............| 00000050 fc f8 f4 ff fc f8 f4 ff 5d 56 50 ff a1 94 89 ff |........]VP.....| 00000060 81 70 62 ff 81 70 62 ff 81 70 62 ff 81 70 62 ff |.pb..pb..pb..pb.| 00000070 81 70 62 ff a1 94 89 ff 4d 43 3a ff fa f2 ec ff |.pb.....MC:.....| 00000080 fb f6 f1 ff fc f8 f4 ff fc f8 f4 ff fc f8 f4 ff |................| 00000090 5d 56 50 ff a0 93 89 ff 80 6f 61 ff 80 6f 61 ff |]VP......oa..oa.| 000000a0 80 6f 61 ff 80 6f 61 ff 80 6f 61 ff a0 93 89 ff |.oa..oa..oa.....| 000000b0 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000000c0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9f 93 88 ff |........]VP.....| 000000d0 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff |.o`..o`..o`..o`.| 000000e0 7f 6f 60 ff 9f 93 88 ff 4d 43 3a ff fa f2 ed ff |.o`.....MC:.....| 000000f0 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000100 5d 56 50 ff 9f 93 88 ff 7f 6f 60 ff 7f 6f 60 ff |]VP......o`..o`.| 00000110 7f 6f 60 ff 7f 6f 60 ff 7f 6f 60 ff 9f 93 88 ff |.o`..o`..o`.....| 00000120 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 00000130 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 00000140 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff 7e 6e 60 ff |~n`.~n`.~n`.~n`.| 00000150 7e 6e 60 ff 9e 92 88 ff 4d 43 3a ff fa f2 ed ff |~n`.....MC:.....| 00000160 fb f6 f2 ff fc f8 f5 ff fc f8 f5 ff fc f8 f5 ff |................| 00000170 5d 56 50 ff 9e 92 88 ff 7d 6d 5f ff 7d 6d 5f ff |]VP.....}m_.}m_.| 00000180 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 9e 92 88 ff |}m_.}m_.}m_.....| 00000190 4d 43 3a ff fa f2 ed ff fb f6 f2 ff fc f8 f5 ff |MC:.............| 000001a0 fc f8 f5 ff fc f8 f5 ff 5d 56 50 ff 9e 92 88 ff |........]VP.....| 000001b0 7d 6d 5f ff 7d 6d 5f ff 7d 6d 5f ff 7d 6d 00 fe |}m_.}m_.}m_.}m..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 32 00 00 00 |...........P2...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== unlzma: Decoder error According to this Fedora 14 is visible in sda3. Does anybody know a way to add Fedora 14 to grub.cfg of Ubuntu so I can choose which OS to boot? Thanks in advance.

Read the article

Ubuntu 12.04, Can hear the sound but Sound option in settings shows no sound card

- by Vivek Srivastava

I have weired issue. I did a fresh installation of Ubuntu 12.04. Then I installed Nvidia drives for my graphics card. I executed the command "modprobe nvidia" after installing the Nvidia drivers and rebooted. After reboot, sound indicator in top panel is disabled and I can't control the volume from there. I opened Settings Sound and it does not show any sound card installed. However, I can hear the sound. Please help. Output of lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 01:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1) Output of lsmod | grep snd snd_hda_codec_hdmi 32191 4 snd_hda_codec_realtek 73851 1 snd_hda_intel 33367 0 snd_hda_codec 134156 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_timer 29990 1 snd_pcm snd 78855 7 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm

Read the article

Ubuntu, User Accounts messed up

- by Vor

I need to fix Ubuntu Accounts some how but don't really see how it could be done. The problem is: files /etc/passwd and /etc/hostname and /etc/hosts where changed. /etc/passwd After John:x:1000:1000:John,,,:/home/serg:/bin/bash Befoure serg:x:1000:1000:John,,,:/home/serg:/bin/bash /etc/hosts After 127.0.0.1 localhost 127.0.1.1 John-The-Rippe Befoure 127.0.0.1 localhost 127.0.1.1 serg-Protege /etc/hostname After John-The-Ripper Befoure serg-PORTEGE-Z835 I was trying to simply changed this files but can not do this because permission denied. When I'm trying to login as a root I got this message: John@John-The-Ripper:~$ sudo -s [sudo] password for John: John is not in the sudoers file. This incident will be reported The file sudoers is empty: John@John-The-Ripper:~$ vi /etc/sudoers When I type users in cp: John@John-The-Ripper:~$ users John John When I type id, I got this: John@John-The-Ripper:~$ id uid=1000(John) gid=1000(serg) groups=1000(serg) This doesn't work eather: John@John-The-Ripper:~$ usermod -l John serg usermod: user 'serg' does not exist John@John-The-Ripper:~$ adduser serg adduser: Only root may add a user or group to the system. ater. Then I tried to go to the GRUB menu and from there log in as a root. I did this, but however When I tryed to create user serg, It gave me an error that group already exist. When I tried to change /etc/passwd it said 'permission denied' And this doens't do the trick: John@John-The-Ripper:~$ visudo visudo: /etc/sudoers: Permission denied visudo: /etc/sudoers: Permission denied Also The last thing I tried to do is to create a bootable USB and reinstall ubuntu, however I can not open USB-Creator because it asked me a root passwd. But it doesn't work. HELP ME PLEASE =)))

Read the article

Lenovo Thinkpad L430 overheating due to fan problems

- by Dirk B.

This is the same question as Fan not working on thinkpad L430, laptop overheating, but that question has been marked as a duplicate, which it is not, and I cannot reopen it. I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. update: If you need it, lspci is available here

Read the article

How to recover dpkg from corrupted downloads?

- by rocker9455

I just upgraded to the 10.10 RC earlier and had a few problems with graphic drivers (x didnt start) But i have remedied that now. When i run 'sudo apt-get install -f' i get this: will@UbuntuBox:/mnt/slax$ sudo apt-get install -f [sudo] password for will: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libmono-wcf3.0-cil openoffice.org-calc openoffice.org-core The following NEW packages will be installed: libmono-wcf3.0-cil The following packages will be upgraded: openoffice.org-calc openoffice.org-core 2 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. 16 not fully installed or removed. Need to get 0B/32.5MB of archives. After this operation, 1,929kB disk space will be freed. Do you want to continue [Y/n]? Y (Reading database ... 201565 files and directories currently installed.) Preparing to replace openoffice.org-calc 1:3.2.1-6ubuntu2~10.04.1 (using .../openoffice.org-calc_1%3a3.2.1-7ubuntu1_i386.deb) ... Unpacking replacement openoffice.org-calc ... xz: (stdin): Compressed data is corrupt dpkg-deb: subprocess <decompress> returned error exit status 1 dpkg: error processing /var/cache/apt/archives/openoffice.org-calc_1%3a3.2.1-7ubuntu1_i386.deb (--unpack): short read on buffer copy for backend dpkg-deb during `./usr/lib/openoffice/basis3.2/program/libscfiltli.so' dpkg: regarding .../openoffice.org-core_1%3a3.2.1-7ubuntu1_i386.deb containing openoffice.org-core: openoffice.org-core conflicts with openoffice.org-calc (<< 1:3.2.1-7ubuntu1) openoffice.org-calc (version 1:3.2.1-6ubuntu2~10.04.1) is present and installed. dpkg: error processing /var/cache/apt/archives/openoffice.org-core_1%3a3.2.1-7ubuntu1_i386.deb (--unpack): conflicting packages - not installing openoffice.org-core Unpacking libmono-wcf3.0-cil (from .../libmono-wcf3.0-cil_2.6.7-3ubuntu1_all.deb) ... dpkg-deb (subprocess): data: internal gzip read error: '<fd:0>: data error' dpkg-deb: subprocess <decompress> returned error exit status 2 dpkg: error processing /var/cache/apt/archives/libmono-wcf3.0-cil_2.6.7-3ubuntu1_all.deb (--unpack): subprocess dpkg-deb --fsys-tarfile returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/openoffice.org-calc_1%3a3.2.1-7ubuntu1_i386.deb /var/cache/apt/archives/openoffice.org-core_1%3a3.2.1-7ubuntu1_i386.deb /var/cache/apt/archives/libmono-wcf3.0-cil_2.6.7-3ubuntu1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Any idea how i can get the broken packages fixed? Cheers, Will

Read the article

What filesystem for an external Harddrive (Linux/Mac/Windows)

- by Marcel

What Filesystem should I use for an external USB harddrive (500GB), with possibility to share with a Mac and Windows systems, for example at the office. Now it is NTFS but back in the day the NTFS support was not stable under Linux and I think it is not supported on a Mac. I would just use FAT32, but it has 4GB file size limitation, do I overlooked any other option? I looked here: filesystem types for partitions but a Mac is not mentioned. edit Windows is the least important, I am not sure if I need Windows support at all. So what would I use just for Linux and Mac?

Read the article

Psychonauts crashes right after entering load save door

- by user67974

Psychonauts crashes right after entering the 'Load Save' door. Here is the terminal output: Shader assembly time: 0.88 seconds Found OpenAL device: 'Simple Directmedia Layer' Found OpenAL device: 'ALSA Software' Found OpenAL device: 'OSS Software' Found OpenAL device: 'PulseAudio Software' Opened OpenAL Device: '(null)' ERROR: CAudioDrv::CAudioDrv->alGenSources reports AL_INVALID_VALUE error. PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfx.isb' to 'WorkResource/Sounds/commonfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonvoice.isb' to 'WorkResource/Sounds/commonvoice.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmusic.isb' to 'WorkResource/Sounds/commonmusic.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmentalfx.isb' to 'WorkResource/Sounds/commonmentalfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmenfxmem.isb' to 'WorkResource/Sounds/commonmenfxmem.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfxmem.isb' to 'WorkResource/Sounds/commonfxmem.isb' GameApp::StartUp InitSoundFiles() completed in 0.15 seconds GameApp::StartUp Load some common textures completed in 0.00 seconds WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb GameApp::StartUp InitEntities() completed in 0.02 seconds PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' GameApp::StartUp m_pSaveLoadInterface->Startup() completed in 0.00 seconds GameApp::StartUp m_UserInterface.Setup() completed in 0.00 seconds STUBBED: multisample at EDisplayOptionsWidget (/home/icculus/projects/psychonauts/Source/game/luatest/Game/UIPCDisplayOptions.cpp:97) STUBBED: VK_* at CheckVirtualKey (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:1443) Game: Engine Running hook startup Game: Engine -> SetupGlobalObjects Game: Engine -> SetupLevelMenu Game: Engine -> InitMath GameApp::StartUp InitLua2() completed in 0.00 seconds GameApp::StartUp SetupLevelMenu() completed in 0.00 seconds STUBBED: do we even use this? at InitSocket (/home/icculus/projects/psychonauts/Source/game/luatest/Game/Gameplaylogger.cpp:210) GameApp::StartUp Post-Install total completed in 0.20 seconds Start Up completed in 1.57 seconds UnixMain: StartUp successful.. Working directory: /opt/psychonauts STUBBED: dispatch SDL events at PCMainHandleAnyWindowsMessages (/home/icculus/projects/psychonauts/Source/game/luatest/UnixMain.cpp:56) STUBBED: write me at GetJoystickInput (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:428) STUBBED: write me at GetJoystickActionValue (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:613) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' Prerender subtitle file: workresource\cutScenes\prerendered\dflogo.dfs not found PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' STUBBED: fixed function pipeline? at setColorOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2097) STUBBED: fixed function pipeline? at setColorArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2106) STUBBED: fixed function pipeline? at setColorArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2115) STUBBED: fixed function pipeline? at setAlphaOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2124) STUBBED: fixed function pipeline? at setAlphaArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2133) STUBBED: fixed function pipeline? at setAlphaArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2142) STUBBED: fixed function pipeline? at setProjected (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2223) LOC WARN: Could not open Localization file 'Localization/English/_StringTable.lub' STUBBED: memory status at UpdateMemoryTracking (/home/icculus/projects/psychonauts/Source/game/luatest/Game/GameApp.cpp:4884) WARN: Couldn't resize array to 128; out-of-bounds elements are still in use: Vertex Pool, 188 Loading new level 'STMU' STUBBED: Need multithreaded GL at DisplayLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:83) ========================= Memory post unload level ========================= ========================= LOC WARN: Could not open Localization file 'Localization/English/ST_StringTable.lub' DaveD: Info: Texture pack file contains 137 textures Doing a texture readback for locking! Game: Engine Saved[GLOBAL]: InstaHintFord_HostileRecord = [table] Game: Engine Saved[GLOBAL]: InstaHintFord_HostileOrder = [table] WARN: Redundant packfile read: anims\thought_bubble\bubblefirestarting.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleintothemind.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleinvisibility.jan WARN: Redundant packfile read: anims\thought_bubble\bubblepopperfill.jan WARN: Redundant packfile read: anims\thought_bubble\bubbletelekinesis.jan Initializing level script (if there is one) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/stfx.isb' to 'WorkResource/Sounds/stfx.isb' Game: Engine Reloading goals: Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: bUsedSalts = 0 Game: Engine Saved[GLOBAL]: bSTEntered = 1 Game: Engine Saved[GLOBAL]: memoriesST = 1 Game: Engine Saved[GLOBAL]: PsiBallColor = 'red' Game: Engine Saved[ST]: lastSubLevel = 'STMU' Game: Engine LOADING LEVEL st.STMU Game: Engine Saved[CA]: CALevelState = 1 Game: Engine Cutscene progression: CS Script moving from state nil to state nil, resultant state nil. Time: 0.124746672809124. * Stack Trace 1: (null) (line -1, file '(none)) () 2: SpawnScript (line -1, file 'C) (global) 3: onBeginLevel (line -1, file '(none)) (field) 4: (null) (line -1, file '(none)) () WARN: Cannot call GetDirectoryListing when running from the DVD Game: Engine Raz spawning at DartStart startpoint VM : LevelScript could not find script 'doorrimlight1' * Stack Trace 1: (null) (line -1, file '(none)) () WARN: (none(-1) SetEntityAlpha LevelScript: NULL script object passed Game: Engine Saved[GLOBAL]: bLoadedFromMainMenu = 1 Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: NeedRankIncrement = 0 STUBBED: Need multithreaded GL at HideLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:110) WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb Game: Engine Saved[GLOBAL]: SplineFigmentTVSizex = 4.51434326171875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizey = 46.38104248046875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizez = 47.08810424804688 WARN: (none(-1) SetNewAction LevelScript: no string passed ====================== Asset load progression ====================== Initial: 2.518 MB Vertex, 8.688 MB Texture Level : 3.719 MB Vertex, 22.535 MB Texture Scripts: 3.747 MB Vertex, 22.848 MB Texture ====================== ====================== Memory post level load ====================== ====================== WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb DaveD: Level loaded in 0.14 seconds Anim: anims\objects\tk_arrow_idle.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdn.jan: loaded (1 frames latency) Anim: anims\thought_bubble\shieldloop.jan: loaded (1 frames latency) Anim: anims\dartnew\standready.jan: loaded (1 frames latency) Anim: anims\dartnew\walkmove.jan: loaded (1 frames latency) Anim: anims\janitor\hint_end.jan: loaded (1 frames latency) Anim: anims\thought_bubble\ballstatic.jan: loaded (1 frames latency) Anim: anims\dartnew\actionfall.jan: loaded (1 frames latency) Anim: anims\dartnew\standstill.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_lf_rt.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_up_dn.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdefpose.jan: loaded (1 frames latency) 1: 1 (number) 1: 1 (number) STUBBED: This is probably wrong at GetDt (/home/icculus/projects/psychonauts/Source/CommonLibs/DFUtil/Profiler.cpp:181) STUBBED: set specular highlights at setSpecularEnable (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Renderer.cpp:2035) Anim: anims\dartnew\trnrtcycle.jan: loaded (1 frames latency) Anim: anims\dartnew\run.jan: loaded (1 frames latency) Anim: anims\dartnew\walk.jan: loaded (1 frames latency) Anim: anims\thought_bubble\bubbledoublejump.jan: loaded (1 frames latency) Anim: anims\dartnew\longjump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door1closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\180.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door3closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslide45angle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslideflat.jan: loaded (1 frames latency) Anim: anims\dartnew\trnlfcycle.jan: loaded (1 frames latency) WARN: (none(-1) SetNewAction LevelScript: no string passed Anim: anims\dartnew\mainmenu_jump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1open.jan: loaded (1 frames latency) ERROR: Assert in /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Encountered Error: Psychonauts has encountered an error /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Please contact technical support at http://www.doublefine.com. I am currently using Bumblebee for hybrid graphics, if that helps in any way.

Read the article

Installing XULrunner, adding mozilla daily ppa doesn't help

- by Lester Peabody

I need to install xulrunner so I can use Redcar, but am unable to do so. I followed the steps in this question verbatim Install XULRunner 2.0. Here's the output from adding the Mozilla PPA: lpeabody@ubuntu:/var/www/drupal-7.8$ sudo add-apt-repository ppa:ubuntu-mozilla-daily/ppa You are about to add the following PPA to your system: Official PPA for Firefox and Thunderbird daily builds daily (or even multiple builds per day) for various mozilla projects and branches. For questions and bugs with software in this archive, please contact <email address hidden> or visit #ubuntu-mozillateam on freenode. More info: https://launchpad.net/~ubuntu-mozilla-daily/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.n2JGd679HN --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv B34505EA326FEAEA07E3618DEF4186FE247510BE gpg: requesting key 247510BE from hkp server keyserver.ubuntu.com gpg: key 247510BE: "Launchpad PPA for Ubuntu Mozilla Daily Build Team" not changed gpg: Total number processed: 1 gpg: unchanged: 1 lpeabody@ubuntu:/var/www/drupal-7.8$ sudo apt-get update Ign http://us.archive.ubuntu.com oneiric InRelease Ign http://extras.ubuntu.com oneiric InRelease Ign http://us.archive.ubuntu.com oneiric-updates InRelease Ign http://us.archive.ubuntu.com oneiric-backports InRelease Get:1 http://extras.ubuntu.com oneiric Release.gpg [72 B] Hit http://us.archive.ubuntu.com oneiric Release.gpg Hit http://extras.ubuntu.com oneiric Release Hit http://us.archive.ubuntu.com oneiric-updates Release.gpg Hit http://us.archive.ubuntu.com oneiric-backports Release.gpg Hit http://extras.ubuntu.com oneiric/main Sources Hit http://extras.ubuntu.com oneiric/main i386 Packages Ign http://extras.ubuntu.com oneiric/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric Release Hit http://us.archive.ubuntu.com oneiric-updates Release Hit http://us.archive.ubuntu.com oneiric-backports Release Ign http://extras.ubuntu.com oneiric/main Translation-en_US Hit http://us.archive.ubuntu.com oneiric/main Sources Hit http://us.archive.ubuntu.com oneiric/restricted Sources Hit http://us.archive.ubuntu.com oneiric/universe Sources Ign http://extras.ubuntu.com oneiric/main Translation-en Hit http://us.archive.ubuntu.com oneiric/multiverse Sources Hit http://us.archive.ubuntu.com oneiric/main i386 Packages Hit http://us.archive.ubuntu.com oneiric/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric/universe TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/main Sources Hit http://us.archive.ubuntu.com oneiric-updates/restricted Sources Hit http://us.archive.ubuntu.com oneiric-updates/universe Sources Hit http://us.archive.ubuntu.com oneiric-updates/multiverse Sources Hit http://us.archive.ubuntu.com oneiric-updates/main i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/universe TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/main Sources Hit http://us.archive.ubuntu.com oneiric-backports/restricted Sources Hit http://us.archive.ubuntu.com oneiric-backports/universe Sources Hit http://us.archive.ubuntu.com oneiric-backports/multiverse Sources Hit http://us.archive.ubuntu.com oneiric-backports/main i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/universe TranslationIndex Hit http://us.archive.ubuntu.com oneiric/main Translation-en Hit http://us.archive.ubuntu.com oneiric/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric/universe Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/main Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/universe Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/main Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/universe Translation-en Ign http://security.ubuntu.com oneiric-security InRelease Ign http://ppa.launchpad.net oneiric InRelease Ign http://ppa.launchpad.net oneiric InRelease Hit http://security.ubuntu.com oneiric-security Release.gpg Hit http://ppa.launchpad.net oneiric Release.gpg Hit http://security.ubuntu.com oneiric-security Release Get:2 http://ppa.launchpad.net oneiric Release.gpg [316 B] Hit http://ppa.launchpad.net oneiric Release Hit http://security.ubuntu.com oneiric-security/main Sources Get:3 http://ppa.launchpad.net oneiric Release [9,788 B] Hit http://security.ubuntu.com oneiric-security/restricted Sources Hit http://security.ubuntu.com oneiric-security/universe Sources Hit http://security.ubuntu.com oneiric-security/multiverse Sources Hit http://security.ubuntu.com oneiric-security/main i386 Packages Hit http://security.ubuntu.com oneiric-security/restricted i386 Packages Hit http://security.ubuntu.com oneiric-security/universe i386 Packages Hit http://security.ubuntu.com oneiric-security/multiverse i386 Packages Hit http://security.ubuntu.com oneiric-security/main TranslationIndex Hit http://security.ubuntu.com oneiric-security/multiverse TranslationIndex Hit http://security.ubuntu.com oneiric-security/restricted TranslationIndex Hit http://security.ubuntu.com oneiric-security/universe TranslationIndex Hit http://ppa.launchpad.net oneiric/main Sources Hit http://ppa.launchpad.net oneiric/main i386 Packages Ign http://ppa.launchpad.net oneiric/main TranslationIndex Hit http://security.ubuntu.com oneiric-security/main Translation-en Get:4 http://ppa.launchpad.net oneiric/main Sources [1,650 B] Get:5 http://ppa.launchpad.net oneiric/main i386 Packages [12.6 kB] Hit http://security.ubuntu.com oneiric-security/multiverse Translation-en Hit http://security.ubuntu.com oneiric-security/restricted Translation-en Ign http://ppa.launchpad.net oneiric/main TranslationIndex Hit http://security.ubuntu.com oneiric-security/universe Translation-en Ign http://ppa.launchpad.net oneiric/main Translation-en_US Ign http://ppa.launchpad.net oneiric/main Translation-en Ign http://ppa.launchpad.net oneiric/main Translation-en_US Ign http://ppa.launchpad.net oneiric/main Translation-en Fetched 24.5 kB in 5s (4,853 B/s) Reading package lists... Done After running the update, I attempted to install xulrunner, but get the following back: lpeabody@ubuntu:/var/www/drupal-7.8$ sudo apt-get install xulrunner-2.0 xulrunner-2.0-dev xulrunner-2.0-gnome-support xulrunner-dev Reading package lists... Done Building dependency tree Reading state information... Done Package xulrunner-2.0-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source Package xulrunner-2.0 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'xulrunner-2.0' has no installation candidate E: Package 'xulrunner-2.0-dev' has no installation candidate E: Unable to locate package xulrunner-2.0-gnome-support E: Couldn't find any package by regex 'xulrunner-2.0-gnome-support' E: Unable to locate package xulrunner-dev If you need to know anything else please specify, I will be prompt with my answers if asked during the next 2 hours... so 2am EDT.

Read the article

Unable to set background image using python (2.7.3), bash and gnome3

- by malon

#!/usr/bin/env python import os bashCommand = "gsettings set org.gnome.desktop.background picture-uri file:///home/malon/autowallpaperchanger/" + pic_name print bashCommand os.system(bashCommand) Print result: gsettings set org.gnome.desktop.background picture-uri file:///home/malon/autowallpaperchanger/wallpaper-1252048.jpg Copying and pasting the print result into a terminal makes the change successfully, so the command is correct, but os.system isn't processing the request correctly for some reason. In the full script (posted below), I use os.system for a different reason immediately before (wget) and that works fine. Thank you! Full script: http://pastebin.com/R90GTmBZ

Read the article

How to (un)dock IBM Thinkpad X41 from X4 Dock(ing station) successfully?

- by nutty about natty

I'd like to start using my docking station again; however, it still doesn't work as it should, see the following bug descriptions (with special focus on Thinkpad X41 & the X4 Dock). Given that it still doesn't work (effective April 2012), my hope is fading that it will start working all of a sudden with Precise Pangolin at the end of the month. This issue is VERY important to me and I would be MOST grateful to anyone being able to sieve through the following links (some of which are actually quite recent) and translate their meaning into reliable and concrete simple (?) steps. I've read briefly about hal and udev, and can imagine that they are somewhat related to this, see links below. I don't want to fire at random. I don't want to tinker around with bash scripts if avoidable... Problem description (more or less ;-) Pressing the undock button on a "ThinkPad X4 Dock" with a ThinkPad X40 does not cause any udev events. And the lights on the dock never change to indicate it is safe to undock. and IBM Thinkpad X41 & docking station no joy :-( ... when pressing the blue undock button on the docking station: - The screen goes blank (with backlight remaining on), - with some SSD/HDD activity; - ctrl alt del causes a shut down after ... seconds, indicating that the system itself hasn't "crashed" but is still (somewhat ?) responsive. and With recent distributions, docking and undocking should function out of the box. You can monitor this by running # udevadm monitor and when you dock or press the undock button you should see a flurry of events. There are some issues though: No event on undock. - In some cases you may not get any events on undock. This is due to the ACPI dock drivers only registering the first logical Dock port they encounter and in some rare cases there may be more then one, such as on a ThinkPad X40 with ThinkPad X4 Dock. Patches are available, and are merged in 2.6.34. Now, if patches are available and merged into 2.6.34 - why isn't (un)docking simply working / fully supported in the latest version of Natty (which to my humble understanding has surpassed kernel version 2.6.34 a while ago)? More relevant links: ThinkPad X41 Docking Station issues and [HOWTO] Run scripts for laptop lid open/close and dock/undock events and finally Symptoms corrected by the latest BIOS Update - ThinkPad X41 - (Fix) USB devices connected to UltraBase X4 or ThinkPad X4 Dock may not be recognized in Boot Menu by pressing F12 during POST. Thanks!!

Read the article

How can I change mouse keymapping

- by zuberuber

I have Razer DeathAdder(left handed edition) and A4Tech wireless mouse. My problem is I don't know how to change wireless mouse keymapping(swaping left/right click). Can somebody guide me how to do such thing? List of my devices: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech Unifying Device. Wireless PID:4004 id=8 [slave pointer (2)] ? ? Razer Razer DeathAdder id=11 [slave pointer (2)] ? ? A4TECH USB Device id=12 [slave pointer (2)] ? ? A4TECH USB Device id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Logitech USB Keyboard id=9 [slave keyboard (3)] ? Logitech USB Keyboard id=10 [slave keyboard (3)] This is my Razer xinput: Device 'Razer Razer DeathAdder': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 5.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 5426, 22 Device Node (241): "/dev/input/event4" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0 And this is my wireless mouse xinput: Device 'A4TECH USB Device': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 2522, 1359 Device Node (241): "/dev/input/event16" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Horiz Wheel" (245), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0

Read the article

dpkg: error: parsing file '/var/lib/dpkg/updates/0045' near line 0:

- by ??????

I am getting this error in Ubuntu 12.04 , while doing the below operation. frank@august:~$ sudo apt-get install ttf-mscorefonts-installer [sudo] password for frank: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. frank@august:~$ sudo dpkg --configure -a dpkg: error: parsing file '/var/lib/dpkg/updates/0045' near line 0: newline in field name `#padding' frank@august:~$ & frank@august:~$ head /var/lib/dpkg/updates/0045 #padding #padding #padding #padding #padding #padding #padding #padding #padding #padding frank@august:~$ I can't see where is the error , help me to solve this. Thank you.

Read the article

Macbook pro 8,1 ubuntu 12.04 sd card reader doesnt work

- by mandy

THe built in sd card reader on the macbook pro 8,1 (2011, early or mid i think) doesnt work AT ALL. However i read here.... https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801034 that someone plugged in ethernet and it works. How the hell does that make a difference? There has to be some kind of better workaround? I take my laptop on the go, thats why i bought a LAPTOP. I dont want to be tethered down. Please help?

Read the article

Display particular data into a file

- by Avinash K G

I'm new to Ubuntu and have been using it for a couple of weeks now. Recently I encountered a problem where in I had to display a particular data on to a file. Here is the output displayed on the terminal. Potential vulnerability found (CVE-2009-4028) CVSS Score is 6.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2009-4030) CVSS Score is 4.4 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2009-5026) CVSS Score is 6.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0075) CVSS Score is 1.7 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0087) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0101) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0102) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0112) CVSS Score is 3.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0113) CVSS Score is 5.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0114) CVSS Score is 3.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0115) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0116) CVSS Score is 4.9 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0118) CVSS Score is 4.9 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0119) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0120) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0484) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0485) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0490) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0492) CVSS Score is 2.1 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0540) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0553) CVSS Score is 7.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0574) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0583) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1492) CVSS Score is 7.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1506) CVSS Score is 2.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1521) CVSS Score is 6.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) I intend to display the Potential vulnerability found field and the corresponding score alone. There seems to be about 9995 entries and I would like to display all of them. I have been using this command as of now awk '/CVSS Score is/ < /Potential vulnerability found/' output.txt but this seems to display only the name of the vulnerability or the score. How do I display this in file(text,excel) such that all the vulnerability and the corresponding score willbe displayed. Any help would be appreciated Thank you.

Read the article

How do I prevent directories mounted with 'bind' from appearing on 'Devices' on nautilus?

- by Can

I have these lines in the fstab # binds /media/DataNtfs/Music /home/can/Music none rw,bind /media/DataNtfs/Pictures /home/can/Pictures none rw,bind /media/DataNtfs/Downloads /home/can/Downloads none rw,bind /media/DataNtfs/Documents /home/can/Documents none rw,bind /media/DataNtfs/Backups /home/can/Backups none rw,bind /media/DataNtfs/Notes /home/can/Notes none rw,bind /media/DataNtfs/Other /home/can/Other none rw,bind /media/DataNtfs/Packages /home/can/Packages none rw,bind /media/DataNtfs/Photos /home/can/Photos none rw,bind /media/DataNtfs/Videos /home/can/Videos none rw,bind /media/DataNtfs/WorkSpace /home/can/WorkSpace none rw,bind

Read the article

Software location after installing via Ubuntu Software Center

- by Anh Tuan

Let me tell you my problem: I just move from Windows 7 to Ubuntu and I'm trying to setup my programming environment. I installed Eclipse via Ubuntu Software Center, then opened it and installed additional plugins. Problem came up when I tried to install Subclipse: according to the official guide, I installed JavaHL, but that damned library wasn't automatically linked by Eclipse, so I was told to "Note that JavaHL does not install in a location that is on Eclipse's default path, so eclipse must be launched with -vmargs -Djava.library.path=/usr/lib/jni". Yes I know I have to modify eclipse.ini and add that vmargs line, but where is eclipse.ini??? I opened /usr/bin, the eclipse.exe is there but I can't found the rest. I really don't want to remove this Eclipse and download another from Eclipse download page, because I will have to reinstall every plugins again. Please can anyone tell me how to find the directory which contains software which installed via USC? Any help will be appreciated.

Read the article

How to use crontab, .netrc, and git push?

- by Jon

Hi all, I am in the process of automating the backups from various servers to a central point then pushing those config changes into a git repo so i can track any changes over time. The rest of the scripts are working well, I can copy / rsync the files across the network to a central point. The last script is to get the config files to be put into / updated in repository. The script is as follows: #!/bin/bash clear SERVERNAME="betty" SCRIPTDIR="/home/jon" GITROOT="/tmp/git" TEMPROOT="/tmp/backups" BACKUPROOTDIR="/mnt/backups" echo " - running as user: $UID" echo "backingup git config on $SERVERNAME" echo "" # check to see if root backup folder exists, otherwise create it. if [ -d $GITROOT ]; then rm -rf $GITROOT fi mkdir $GITROOT cd $GITROOT echo " - testing if home is where I think it should be!" echo $HOME echo " - testing if it can see netrc" tail $HOME/.netrc git clone http://192.168.10.97:8000/repositories/HOH-config-backups.git cd HOH-config-backups echo " - copy Configuration Folders across" cp -r $BACKUPROOTDIR/Configuration/* $GITROOT/HOH-config-backups/ cp -r $BACKUPROOTDIR/scripts $GITROOT/HOH-config-backups/ git add . git commit -a -m "committing any new configuration changes!" git push origin master echo "" echo "Git repo updated" echo "" echo " - backing up this script" FIREWIGSCRIPTLOC="$BACKUPROOTDIR/scripts/$SERVERNAME" if [ ! -d $FIREWIGSCRIPTLOC ]; then mkdir $FIREWIGSCRIPTLOC fi cp /home/jon/gitConfig.sh $FIREWIGSCRIPTLOC The git repo is on a different machine in the network using Apache and HTTP-backend.exe (smart HTTP protocol). If I run this script as me "jon" it works. If I run it in crontab it fails. git uses the /home/jon/.netrc file for authentication: machine 192.168.10.97 login gitconfig password 1234579 The log from crontab is: TERM environment variable not set. - running as user: 1000 backingup git config on betty - testing if home is where I think it should be! /home/jon - testing if it can see netrc machine 192.168.10.97 login gitconfig password 1234579 got 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd walk 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd got be880f2d306778a538d592e7a02eb19f416612f7 got bd387e8def9f77aafa798bf53e80d949aba443e8 got 1bc1a59e12775841d4c59d77c63b8a73823138c2 walk bd387e8def9f77aafa798bf53e80d949aba443e8 Getting alternates list for http://192.168.10.97:8000/repositories/HOH-config-backups.git got 030512237bca72faf211e0e8ec2906164eac34f6 got 9bc2f575240bc1f61ff7d69777ce1a165d06b184 got b8400f7f01429104a9d4786a6bb1a16d293e37c1 got 2403b5bf611010e0b401f776f0e23b09ce744838 got 1a27944c48269ef3608a8f2466e43402d06faac0 got b686f45b7d57af4fa8ca0d528bb85216d6247e19 Getting pack list for http://192.168.10.97:8000/repositories/HOH-config-backups.git Getting index for pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff Getting pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff which contains ff84d6d48e9326066438d167a10251218d612b3d walk b686f45b7d57af4fa8ca0d528bb85216d6247e19 got 364e30daec17814073e668f490bb84af891fe1f7 got 23f6497e7f9b80e0d90adad73bd0407a0e5ac6ce got 9e77c47574b5e23ea669afe0c23ab235e4917ee1 got 6654e0d328a216b3783e98c47206cb2d01b3353d got 28821ffd437d2689ffb82c6e4b9c3f5372c95c4b got 8c384a24f645389e4d4b08013c79e9e73a658342 got d203be0123736ee025ce20c081f1489098648dfc got 1852603bf7709e71417d8ccec02390279d533642 got fb753a26b20b04694419fce8ecdaa8dbec105cf1 got 736028997cd84dd1c135f57e9d246674b9cd0b9d got 7af836249e20096d0476a548d5be702a071cdd4b got 240dc39d9db50df63073fc7927b2d002dfa0f54c got 93abd36e3935a01011eb753b635a1a0e984bf31e got c6269e28fecf4d8d0d98b9358aecb3acff02df44 got b0aa29432f73e64032682a351d436c24b14078ab walk 240dc39d9db50df63073fc7927b2d002dfa0f54c got 58fb66d9f35f8a5e32ff4683309c5f0c2a3a03c5 got 0da2def4de0565483cdbe6b87418ee2beb122e58 got 0f6a86c6f87ed52ad2ed01e5c6edd661d364930c got 437a93d27b5bb89c739a0564a34a616e832c3ebe got fe0385abe5c0acd8462268dac330bae00e934f1b got 24259f8f5c5c9ee974a75fe3d1e07c02e3e20fe9 got d29f624bf1a5eceedaa86c10fee35f62747c7d04 got 0154e4c987132585ea7a92b77d02dba285512d6b got eda8bf526567c25ee70addb2ad3c3c6aa57eac77 got 9f3d9d7262d66f9fa4f6a13b7c86199953f4bc4e got 8e20881e19667aa22245d0598646991067455a4d got abb1123145689b35eb19519952c71253ee45fa98 got dfeff593c79b4156ce2ce1adf043d0e80356488c got e20c5b48b1d360e0bcf34189e3f3d2bbf23e92cc got b13eb81cc274780322ecf786372320343926bec9 walk 8de83868b3fac748b0a55eba16c8f668ec852abb got b5961421bbc42afe7a07cc1c8b615aba26ba74d7 got 2650ba819019df4193b482733e29ca79b29f3f2c got b3111e1be8103e91803a97a817ed81f28025aca1 got b060be934d709684f5eb5dad3c03932a3589e864 got cf70d2043f081d7a4438e9d5a290a9f986c84060 got 80bf0f1cc836feab86d6935bb7968d8555a8d531 got da318d167920e34bc6573e4fc236249ccbbee316 got d82ac853d387b760149599e6e1ab96403f6ec672 got 0005f691d1f46550fdb4e56025f52e30a5b18cc2 Initialized empty Git repository in /tmp/git/HOH-config-backups/.git/ - copy Configuration Folders across Created commit 424df2f: committing any new configuration changes! 3 files changed, 55 insertions(+), 1 deletions(-) create mode 100755 scripts/betty/gitConfig.sh error: Cannot access URL http://192.168.10.97:8000/repositories/HOH-config-backups.git/, return code 22 error: failed to push some refs to 'http://192.168.10.97:8000/repositories/HOH-config-backups.git' Git repo updated - backing up this script cp: cannot create regular file `/mnt/backups/scripts/betty/gitConfig.sh': Permission denied my crontab is: # m h dom mon dow command 04 * * * * /home/jon/gitConfig.sh > /tmp/gitconfig.log 2>&1 I open it by doing: $crontab -e i.e. not as root. I am a bit confused as to why it is not running as my user (or what user id 1000 is). Not sure what I need to do to get the push with git to work within crontab. edit: found out about the userid: jon@betty:~$ id uid=1000(jon) gid=1000(jon) groups=4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),114(lpadmin),115(admin),1000(jon) here is my $HOME/.gitconfig file: [user] name = Jon Hawkins email = [email protected] Thanks

Read the article

How to Install vaio-control-center from source?

- by KasiyA

I have a problem about turning off keyboard backlight that I asked here with no useful answers. After searching on internet I find a package for vaio control center and downloaded it from here, I don't know how to install it. This is the output of trying one solution: USER@XXXXpc:~/vaio-control-center-0.1$ ls compile Makefile run vaio-control-center vcc COPYING moc_main_window.cpp ui_main_window.h vaio-control-center.pro USER@XXXXpc:~/vaio-control-center-0.1$ ./compile make: *** No rule to make target `/usr/share/qt/mkspecs/linux-g++-64/qmake.conf', needed by `Makefile'. Stop. USER@XXXXpc:~/vaio-control-center-0.1$ ./run ./run: 3: ./run: ./vaio-control-center: not found USER@XXXXpc:~/vaio-control-center-0.1$ Updated I tried also with @pandya's suggestion from here. and the output is as follows: root@user-pc:/# cd /home/user/vaio-f11-linux.control-center root@user-pc:/home/user/vaio-f11-linux.control-center# ls compile COPYING resource.qrc run sony-acpid vaio-control-center.pro vcc root@user-pc:/home/user/vaio-f11-linux.control-center# ./compile -su: ./compile: Permission denied root@user-pc:/home/user/vaio-f11-linux.control-center# sudo ./compile sudo: ./compile: command not found root@user-pc:/home/user/vaio-f11-linux.control-center# gksudo ./compile root@user-pc:/home/user/vaio-f11-linux.control-center# <----- nothing happened here root@user-pc:/home/user/vaio-f11-linux.control-center# ./run -su: ./run: Permission denied root@user-pc:/home/user/vaio-f11-linux.control-center# sudo ./run sudo: ./run: command not found root@user-pc:/home/user/vaio-f11-linux.control-center# gksudo ./run root@user-pc:/home/user/vaio-f11-linux.control-center# <----- nothing happened here root@user-pc:/home/user/vaio-f11-linux.control-center# and after running that I didn't see any affect on keyboard backlight.

Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 57/1008 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64 | Next Page >

- by april

- by TheBumpper

- by sfrj

- by user287957

- by jdamae

- by valya

- by TreefrogInc

- by Dananjaya

- by Vivek Srivastava

- by Vor

- by Dirk B.

- by rocker9455

- by Marcel

- by user67974

- by Lester Peabody

- by malon

- by nutty about natty

- by zuberuber

- by ??????

- by mandy

- by Avinash K G

- by Can

- by Anh Tuan

- by Jon

- by KasiyA

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64 | Next Page >