Search Results

Search found 71513 results on 2861 pages for 'file extension'.

Page 574/2861 | < Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >

• How does the EFI partition work and can I boot an x86 OS with a bootx64.efi file?

  - by Ian

  I have a Thinkpad X230 laptop and I want to install Linux Mint Debian Edition along side Windows 7 on my GPT formatted SSD with the BIOS in UEFI mode. The problem is that I don't understand how EFI booting works. There seems to be an EFI partition involved with some folders and binary files in it. GRUB 2 seems to be able to make more folders in it (I followed this guide http://www.thinkwiki.org/wiki/UEFI_Firmware), but it appears that the only file that does anything is the bootx64.efi file in the /efi/boot folder of the EFI partition (I am not sure if this is always the case, but it appears to be the case for my laptop http://www.thinkwiki.org/wiki/Category:X220). Here is what I have been able to do: I can install Linux Mint Debian Edition x86 with the BIOS in BIOS mode on my SSD. I can then install grub-efi and follow the guide linked above. The problem is that I don't get a GRUB prompt when I switch the BIOS to UEFI mode. It just boots Windows. It appears that I can either boot from the SSD or something called "Windows Boot Manager". If I replace the bootx64.efi with the file created by GRUB, I can no longer boot directly from the SSD. Booting from "Windows Boot Manager" still works fine. I realize that the guide says to use x64 Linux, but Linux Mint Debian Edition x64 hangs during the install process. I am really confused. What should I do? Can anyone explain how the EFI boot partition works? Can a bootx64.efi boot an x86 OS? Should I just give up with using UEFI? I haven't been able to find very much useful information about using Debian based operating systems with UEFI. Thanks, Ian

  Read the article

• Migrating Windows 2003 File Server Cluster to Windows 2008 R2 Standalone?

  - by Tatas

  We have a situation where we have an aging Windows 2003 File Server Cluster that we'd like to move to a standalone Windows Server 2008 R2 VM that resides in our Hyper-V R2 installation. We see no need to keep the Clustering as Hyper-V is now providing our Failover/Redundancy. Usually, in a standalone file server migration we migrate the data, preserving NTFS permissions and then export the sharing permissions from the registry and import them on the new server. This does not appear possible in this instance, as the 2003 cluster stores the sharing permissions quite differently. My question is, how would one perform this type of migration? Is it even possible? My current lead is the File Server Migration Toolkit, however I can find no information on the net about migrating from cluster to standalone, only the opposite. Please help. UPDATE: We ended up getting the data copied over (permissions intact), but had to recreate the shares manually by hand. It was a bit of a pain but it did in the end work out.

  Read the article

• Why does the file date always change to the current date?

  - by Marshall

  We are a programming shop, but this i snot a programming question. My boss has put an external HD on the network. It contains the 'home' folders for users on the network. He uses it to place VB projects that he wants me to work on. But no matter what date and time he places a project on the drive, the file dates(modified) always shows the current date, though nothing in the files have changed. It makes it very hard to confirm that he has given me the latest versions. (He is not a fan of version control and nothing I do will convince him different.) Any ideas why this happens and how to prevent it from happening? P.S. As I wrote this I decided to add the last accessed date to the file display, and those dates happen to show the dates I expect to see. Why is the modified date getting changed, but not the accessed date. Does the accessed date change only when the files are opened or read, changed or not? Note: I use Directory Opus 9, a replacement for windows file browser. Thanks, Marshall

  Read the article

• How can I use varnish to generate a robots.txt file even for subdomain of the same site?

  - by Sam

  I want to generate a robots.txt file using Varnish 2.1. That means that domain.com/robots.txt is served using Varnish and also subdomain.domain.com/robots.txt is also served using Varnish. The robots.txt must be hardcoded into default.vcl file. is that possible? I know Varnish can generate a maintenance page on error. I'm trying to make it generate a robots.txt file. Can anyone help? sub vcl_error { set obj.http.Content-Type = "text/html; charset=utf-8"; synthetic {" <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <title>Maintenance in progress</title> </head> <body> <h1>Maintenance in progress</h1> </body> </html> "}; return (deliver); }

  Read the article

• How to "swap in" again memory from page file to physical memory in Windows at once (like linux swap-off)

  - by Arnout

  Is there a way to swap back in (to put back all the memory data that was put into the page file (or swap, whatever you prefer)) memory on a windows PC? On linux, one can easily do this with the swapoff /dev/sdaX, where X is the swap partition. On windows, it seems to ask me to reboot each time.. The reason I'd like to do this, is that, even though swapping out the data to the swap file allows me to play a resource-hungry game fully in physical ram, when I stop the game, all the rest of my programs run slow. This is or course normal; all the programs were pushed into the page file because my RAM was too small, and all memory access to those programs after gaming bumps into hard page faults, with major delays and some frustration as a consequence. However, that frustration could easily be avoided, by simply allowing the PC to copy all data back into the physical memory for a minute or so, and then resume working on a fast working PC! (rather than having to endure the slowness -while- working) Thanks in advance for any advice on this! Kind regards

  Read the article

• Can't make Dovecot communicate with Postfix using SASL (warning: SASL: Connect to private/auth failed: No such file or directory)

  - by Fred Rocha

  Solved. I will leave this as a reference to other people, as I have seen this error reported often enough on line. I had to change the path smtpd_sasl_path = private/auth in my /etc/postfix/main.cf to relative, instead of absolute. This is because in Debian Postfix runs chrooted (and how does this affect the path structure?! Anyone?) -- I am trying to get Dovecot to communicate with Postfix for SMTP support via SASL. the master plan is to be able to host multiple e-mail accounts on my (Debian Lenny 64 bits) server, using virtual users. Whenever I test my current configuration, by running telnet server-IP smtp I get the following error on mail.log warning: SASL: Connect to /var/spool/postfix/private/auth failed: No such file or directory Now, Dovecot is supposed to create the auth socket file, yet it doesn't. I have given the right privileges to the directory private, and even tried creating a auth file manually. The output of postconf -a is cyrus dovecot Am I correct in assuming from this that the package was compiled with SASL support? My dovecot.conf also holds client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } I have tried every solution out there, and am pretty much desperate after a full day of struggling with the issue. Can anybody help me, pretty please?

  Read the article

• Best way to 'harden' embedded ext4 file server against unexpected loss of power?

  - by Jeremy Friesner

  Hi all, First, a little background: my company makes an audio streaming device that is a headless, rack-mounted Linux box with a couple of SSDs attached. Each SSD is formatted with ext4. The users can connect to the system using Samba/CIFS to upload new audio files or access existing ones. There is also custom software for streaming out audio over the network. This is all fine. The only problem is that the users are audio people, not computer people, and see the system as a 'black box', not as a computer. Which means that at the end of the day, they aren't going to ssh in to the box and enter "/sbin/shutdown -h"; they are just going to cut power to the rack and leave, and expect things to still work properly the next day. Since ext4 has journalling, journal checksumming, etc, this mostly works. The only time it doesn't work is when someone uploads a new file via Samba and then cuts power to the system before the uploaded data has been fully flushed to the disk. In that case, they come in the next day and find that their new file has been truncated or is missing entirely, and are unhappy. My question is, what is the best way to avoid this problem? Is there a way to get smbd to call "sync" at the end of every upload? (Performance on uploads isn't so important, since they only happen occasionally). Or is there a way to tell ext4 to automatically flush within a few seconds of any change to a file? (Again, performance can be sacrificed for safety here) Should I set a particular write-ordering mode, activate barriers, etc?

  Read the article

• Using Windows Explorer, how to find file names starting with a dot (period), in 7 or Vista?

  - by Chris W. Rea

  I've got a MacBook laptop in the house, and when Mac OS X copies files over the network, it often brings along hidden "dot-files" with it. For instance, if I copy "SomeUtility.zip", there will also be copied a hidden ".SomeUtility.zip" file. I consider these OS X dot-files as useless turds of data as far as the rest of my network is concerned, and don't want to leave them on my Windows file server. Let's assume these dot-files will continue to happen. i.e. Think of the issue of getting OS X to stop creating those files, in the first place, to be another question altogether. Rather: How can I use Windows Explorer to find files that begin with a dot / period? I'd like to periodically search my file server and blow them away. I tried searching for files matching ".*" but that yielded – and not unexpectedly – all files and folders. Is there a way to enter more specific search criteria when searching in Windows Explorer? I'm referring to the search box that appears in the upper-right corner of an Explorer window. Please tell me there is a way to escape my query to do what I want? (Failing that, I know I can map a drive letter and drop into a cygwin prompt and use the UNIX 'find' command, but I'd prefer a shiny easy way.)

  Read the article

• xargs -I replace-str option difference

  - by foresightyj

  From my understanding, the following should mean exactly the same: ls -1 | xargs file {} ls -1 | xargs -I{} file {} if -I option is not specified, it is default to -I{}. I want to list all files in the current directory and run file command on each of them. Some have spaces in their names. However, I noticed the difference. See below: $ ls -1 Hello World $ ls -1 | xargs file {} {}: ERROR: cannot open `{}' (No such file or directory) Hello: ERROR: cannot open `Hello' (No such file or directory) World: ERROR: cannot open `World' (No such file or directory) $ ls -1 | xargs -I{} file {} Hello World: directory With -I{} explicitly specified, blanks in file names are treated as expected.

  Read the article

• Uploading file > 1 MB on Django admin gives 400 Bad Request response.

  - by ayaz

  I have a small Django (1.2.x) project deployed on Apache (2.x) via mod_wsgi (2.x). In the admin, if I upload a file < 1MB, I can get it through; however, for a file, say, 1.2MB in size, I get a 400 response from the server with "Error 400" in the body only. I am wondering why this is happening. As far as I can see, there is no LimitRequestBody set in Apache configuration. I have tried uploading with several browsers including: Firefox, Chrome, and Safari. In the log file for Apache, there is apparently no entry for requests that gave the 400 error response. This is strange. I should point out that the scenario where this is happening is thus: The project in question is deployed on two identical Apache servers (completely identical setup) that are behind a load balancer. On my development setup, of course, the problem does not surface. Any help with this will be very much appreciated.

  Read the article

• Is there a way to bundle pdf tiles to a Kindle friendly file?

  - by Maciej Swic

  I'm downloading PDF approach plates from Navigraph, and i have a folder per airport with files named after their corresponding approach / departure etc. Now I'd like to take such a folder with a bunch of PDF files, automatically generate an index and combine them to a single .mobi file that i can send to my Kindle. The index created can be very simple and consist of the file name (without the extension). Tapping an index item should jump to the correct page for that chart. I know there is a host of apps that combine comic book jpg's to ebooks, but is there anything that does the above please?

  Read the article

• RTNETLINK answers: File exists... maybe because assigned a new mac adress

  - by steven

  I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

  Read the article

• Confirm that two filesystems are identical, ignoring special files

  - by endolith

  /media/A and /media/B should be identical, but I want to confirm before deleting one. Duplicate file finders don't work, because they'll find two copies of the same file within B, for instance. I only want to confirm that every file in one is identical to the other. diff -qr /media/A/ /media/B/ seems to work, but the output is cluttered with garbage like diff: /media/A//etc/alternatives/ControlPanel: No such file or directory and File /media/A//dev/tty8 is a character special file while file /media/B//dev/tty8 is a character special file I can suppress the former with 2> /dev/null, but I don't know about the latter. rsync -avn /media/A/ /media/B/ also produces a bunch of clutter, like "skipping non-regular file". How can I compare the two trees and just make sure that all the real files exist in both and are identical?

  Read the article

• How can I delete a specific file from a set of results using the find command in Linux?

  - by PeanutsMonkey

  I have the following command that lists all files with the extension doc, docx, etc. find . -maxdepth 1 -iname \*.doc\* The command returns numerous files some of which I would like to delete. So for example the results returned are Example.docx Dummydata.doc Sample.doc I would like to delete Sample.doc and Dummydata.docx. How do I delete the files using the -exec option. Am I able to pass in the names of the files e.g. rm Dummydata.docx Sample.doc hence the command would look as follows find . -maxdepth 1 -iname \*.doc\* -exec rm Dummydata.docx Sample.doc Can I pass the names of the files within {} afterrm`? e.g. find . -maxdepth 1 -iname \*.doc\* -exec rm {Dummydata.docx} Sample.doc Is there a better way of doing it?

  Read the article

• User not in the sudoers file. This incident will be reported

  - by Sergiy Byelozyorov

  I need to install a package. For that I need root access. However the system says that I am not in sudoers file. When trying to edit one, it complains alike! How I am supposed to add myself to the sudoers file if I don't have the right to edit one? I have installed this system and only administrator. What can I do? Edit: I have tried visudo already. It requires me to be in sudoers in the first place. amarzaya@linux-debian-gnu:/$ sudo /usr/sbin/visudo We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. [sudo] password for amarzaya: amarzaya is not in the sudoers file. This incident will be reported. amarzaya@linux-debian-gnu:/$

  Read the article

• Using Windows Explorer, how to find file names starting with a dot (period), in 7 or Vista?

  - by Chris W. Rea

  I've got a MacBook laptop in the house, and when Mac OS X copies files over the network, it often brings along hidden "dot-files" with it. For instance, if I copy "SomeUtility.zip", there will also be copied a hidden ".SomeUtility.zip" file. I consider these OS X dot-files as useless turds of data as far as the rest of my network is concerned, and don't want to leave them on my Windows file server. Let's assume these dot-files will continue to happen. i.e. Think of the issue of getting OS X to stop creating those files, in the first place, to be another question altogether. Rather: How can I use Windows Explorer to find files that begin with a dot / period? I'd like to periodically search my file server and blow them away. I tried searching for files matching ".*" but that yielded – and not unexpectedly – all files and folders. Is there a way to enter more specific search criteria when searching in Windows Explorer? I'm referring to the search box that appears in the upper-right corner of an Explorer window. Please tell me there is a way to escape my query to do what I want? (Failing that, I know I can map a drive letter and drop into a cygwin prompt and use the UNIX 'find' command, but I'd prefer a shiny easy way.)

  Read the article

• How to define nodes from a Hiera file in Puppet?

  - by Pigueiras

  I am using puppet and the puppet network device management module and I am trying to build my custom type. In the built-in type for the routers configuration, you can specify a list of nodes and then the configuration inside that node: node "c2950.domain.com" { Interface { duplex => auto, speed => auto } interface { "FastEthernet 0/1": description => "--> to end-user workstation", mode => access, native_vlan => 1000 # [...] More configuration } What I am trying to do, is to move the manifest declaration of the nodes and the configuration of my custom type to a Hiera file like this one: nodes: - node1 - node2 config_device: node1: custom_parameter: "whatever1" node2: custom_parameter: "whatever2" And then in the manifest iterate over the hiera file creating the nodes with the configuration of each node with something like (I am taking as reference this question in serverfault): class my_class { $nodes = hiera_array('nodes') define hash_extract() { $conf_hash = hiera_hash("config_device") $custom_paramter = $conf_hash[$name] ## TRICK lies in $name variable node $name { my_custom_device { $name: custom_parameter => $device_conf['custom_parameter'] } } } hash_extract{$pdu_names: } } } But for this solution I have two problems, I can not define a node inside a define and I can not parameterize a node name. So, is there any way to declare nodes from a Hiera file with their configuration inside?

  Read the article

• Doesn't VirtualBox 4.0 support drag-drop file copy yet?

  - by Benjamin

  Version 4.0.0 will be new major release. The following major new features were added: -New settings/disk file layout for VM portability; see the manual for more information. -Open Virtualization Format Archive (OVA) support; see the manual for more information. -VMM: support more than 1.5/2 GB guest RAM on 32-bit hosts -Language bindings: uniform Java bindings for both local (COM/XPCOM) and remote (SOAP) -invocation APIs -Chipset: added support for the Intel ICH9 chipset with 3 PCI buses, PCI express and -Message Signaled Interrupts (MSI) -Audio: Intel HD Audio is now available as guest hardware, for better support with modern -guest operating systems (e.g. 64-bit Windows; bug #2785). -GUI: redesigned user interface with guest window preview -GUI: new display mode with downscaled guest display -Resource control: added support for limiting a VM's CPU time and IO bandwidth. -Storage: support asynchronous I/O for iSCSI, VMDK, VHD and Parallels images -Storage: support for resizing VDI and VHD images -Windows Additions: support for automatically updating the Guest Additions (requires -installed Windows Guest Additions 4.0 or later) -Guest Additions: support for copying files into the guest file system What does the last line mean? I thought this is a drag-drop file copy feature like VMWare. I tried that. But I couldn't copy by drag-drop, ctrl-c ctrl-v either. Edit: I mean VBox 4.0 beta, not 3.x The release note is here. Download link is here.

  Read the article

• Search for files which will open a certain application in Mac OS X

  - by Jacob Palme

  In Mac OS X, when you doubleclick on a file name, that file will open with the application which created the file. So there must be stored, somewhere in the file description on a Mac OS X file, information on which application created this file. Note that this is not the file extension, the file can have any extension, or no extension at all. Two questions regarding this information: (1) How can I search for all files which will open a specific application? (2) How can I see, and change, the application which a certain file will open?

  Read the article

• Strange Windows Server 2008 R2 (FTP Server) Error - Caused by a specific combination of characters in the filename of uploaded file

  - by Steven

  We are running Windows Server 2008 R2, which is setup to be a FTP server. Everything seemed to be working fine until one our our cilents started complaining about their uploads being halted with the message "Connection with server reset". Further diagnosis revealed that a specific combination of characters in the filename will cause a repeatable error. I am hoping that a form expert can confirm the error or perhaps provide a solution. This is an example filename that will always cause the error: REPORT_FILED_000000001 (extension does not matter) Any help would be greatly appreciated! We need files named like this to work properly with our FTP server.

  Read the article

• Hibernation fails; The system cannot find the file specified

  - by GMMan

  Recently I installed Ubuntu 12.04.1 LTS on my Lenovo Y480. Hibernation was working properly after the Ubuntu install, but I was making sure all of the operating systems on my system worked, including OneKey Recovery (recovery partition). It is of note that I installed Windows 7 from scratch with a disk image I downloaded off of my university's DreamSpark program, and further to that I had to image the partition with Paragon Backup & Recovery, repartition to convert the Windows partition to extended, install Ubuntu, and then restore the image. During that process I also used the Windows disc to edit the BCD as to reuse the existing entry for the restored partition. I also used the automated "repair your computer" option. With verification, I noticed that the "repair your computer" option actually wrote to the wrong BCD (the recovery partition), and I mounted the partition and restored the original BCD (from a copy I made earlier), and rebooted. At this point my GRUB broke, and I was able to restore it. At this point hibernation broke. I tried powercfg /h off and powercfg /h on, rebooted, and nothing. Also tried increasing the hibernation file size as directed on this post, but it still doesn't work. Executing shutdown /h yields The system cannot find the file specified.(2). What file? It seems that mounting the system partition sometimes works, but I don't want to keep it mounted in case it gets written to accidentally. How do I permanently fix this?

  Read the article

• How do I speed up and cache mmap file access over NFS on Linux?

  - by Zan Lynx

  The server and client are both 64-bit Ubuntu 10.04 LTS. The application in question is a custom app that uses mmap() for fast random file access. Its ideal state is when the entire file is cached in RAM. The network connections are really fast 10Gb Ethernet. It is a virtual server blade setup. It isn't the network connections slowing things down because everything performs superbly when using a virtual disk (iSCSI to the SAN). But when we run the application on a NFS home directory mount, performance goes to the dogs. It appears that the Linux kernel isn't caching anything. So it is reading every single disk block needed by mmap() accesses over and over and over again. The NFS mount is done through autofs, which has only default settings. /proc/mounts shows the NFS mount is done with the following options: rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.11.52,mountvers=3,mountproto=tcp,addr=192.168.11.52 How can I make Ubuntu 10.04 cache the file instead of reloading it all the time?

  Read the article

• How can I import a CSV file into an SQLite table that doesn't allow null values?

  - by Philip

  I've been using the SQLite Manager extension for Firefox to edit my Chrome web data file in order to restore my keyword searches, and I think I have everything in place except that when I import a CSV file into a table, (a) it won't import into the actual table because the table doesn't allow null values (b) if I import it into a new table that does allow null values, then all the empty strings end up as null and I have to manually edit the row, type and delete a character, and then it's set to empty string and it's fine So: is there either a way to import the CSV so that empty cells are automatically turned into empty strings instead of null, OR is there a way once a table is imported that has null values to convert it into one that doesn't allow null values, where each formerly null value is the empty string? Thanks!

  Read the article

• How is the PHP extensions/modules file structure logic based?

  - by dotpointer

  I'm trying to configure/build PHP 5.3.10 on Linux/Slackware 12 but the extensions appear in the wrong directory when I run make install. In the php.ini file is the extension dir defined: /usr/lib/php/extensions Problem is that when I run "make install" the newly built extensions are copied to a subfolder in extensions directory: /usr/lib/php/extensions/no-debug-non-zts-20090626 What am I supposed to do with this... copy the files down from the no-debug-non-zts-20090626 directory into the extensions directory, create symlinks from extensions to the modules in the no-debug-non-zts-20090626 directory (which will take a lot of time) or what? (I know I can do any of them, but I want to know the correct way...)

  Read the article

• How do I make a PPT file as small as possible?

  - by grunwald2.0

  Currently I am agonizing over several large presentation files, which I happened to reprint to PDFs... One thing I wondered: Do PPT's (from Microsoft Powerpoint) always to have to be that big? And what would be the strategies to make a PPT smaller? (If we say "ceterus paribus" at e.g. 25 slides and assuming that one isn't allowed to use a cloud-based service like GDocs, rocketslide or Prezio.) Of course there are the obvious "bad guys": Images and graphics. But: How about roll-over animations etc, who knows how much space they take? How about "smart arts"? Could one save file size if one would use "Open Office" or "Libre Office" Impress? (I didn't try it yet.) And "what if": What if we need to include e.g. five images (or charts that can't be remade in Excel in time), how would we best reduce the file size impact of those five images, if we needed to? I ask all this from an honest "business" perspective. I am no nerd or "Microsoft MVP" and I don't intend on delving into LATeX or similar yet. But that doesn't mean that I am not curious and very willing to learn. I am basically interested in (proven) best practices. Yes I know this question is lacking "initial research", but I think the perspective of my question is interesting and unique to a lot of people and if we intend to make SE a "Q&A" / Wiki kind-of reference site, this question might be a good way to "collect" advice on a question that has a very defined goal: Minimum file-size.

  Read the article

< Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >