Search Results

Search found 18029 results on 722 pages for 'stripe size'.

Page 574/722 | < Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >

• Sizing Switches for Storage and Production

  - by Untalented

  Couple questions. Should you always completely separate the storage network switches from production switches or are VLANs fine to segment this traffic? Is there a golden rule here? How do you properly size a switch for your environment based on the specifications the manufacturer provide (Throughput, Forwarding Throughput, Stacking Throughput, Max Mac)? If you have two switch options and one has a maximum Mac address of 8,000 vs. another with 16,0000. What does this really mean to me? How do make sure one vs. another is sized properly for me? Besides VLAN and Jumbo Frame support, is there any other "Must" haves for a virtual environments production or storage networks? There is a wealth of knowledge on sizing SANs and such, but this seems equally important and it's quite challenging to find as much information. -- Just to add some tidbits of information for the environment. This setup above is referring to the data centers which supports two different locations which have about 100 users between the two in total. The storage traffic will be iSCSI and will be 3 ESXi Hosts and one SAN housing about 2.7TB of data. Since there is currently no storage network in place (no SAN), I'm having a hard time regarding #2 to really determine what backplane throughput and switch specifications will be sufficient.

  Read the article

• Exchange 2010 UR3 - customizing OWA logon page

  - by STGdb

  I have an Exchange 2010 UR3 deployment that I need to customize the OWA logon page for. I've created a new LGNTOPL.GIF file to replace the existing one in the folder: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.158.1\themes\resources” When I bring up OWA, I still get the original “Outlook Web App” logo. I’ve searched and found a couple of other instances of LGNTOPL.GIF in the directories: “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.123.3\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\14.3.146.0\themes\resources” “C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\Current\themes\resources” I’ve replaced the LGNTOPL.GIF file in each of the above directories but got the same results. I’ve tried clearing my browser cache and even using multiple browsers from multiple PC’s but the same results. I’ve even tried making my GIF file the same pixel size as the original LGNTOPL.GIF logo but still the same results. I’ve tried restarting IIS on the CAS server and restarting the server but same results. Has something changed with Exchange 2010 UR3 when trying to customize OWA? I don't see anything documented about any change to OWA customization. Thanks

  Read the article

• mysql disk io keeps increasing ... is that normal?

  - by trustfundbaby

  So I've been trying to figure out this disk IO problem I have been having with my linode VPS. Over the last day or two I've just left watch -n1 pidstat -d running in a console window and the output looks like this: Monitoring it over the last few days, I've noticed that my problem lies with the init, searchd, and mysql processes. Searchd is sphinx and all its indexes are on disk, so disk io there is inevitable (apparently). What I can't understand is why the disk reads (kB_rd/s) for mysql refuse to stabilize and just keep going up. It started out at 154 yesterday and is up to what you see in that screen shot. but disk writes (kB_wr/s) have remained pretty constant the entire time. My VPS only has 768MB RAM, my mysql db has a size of about 220MB and after running mysqltuner.pl and reading a bit about it, I've been advised to set my innodb_buffer_pool_size to 220MB but I simply cannot afford to do that ... I have it up to 150MB. My question is twofold. Why does the init process have that much disk reading to do? Why is mysql doing so much disk reading?

  Read the article

• Random HTTP 413 error on apach2/php/joomla site

  - by jfab

  I have a Joomla site, and every once in a while when I submit something via a form, I get a HTTP 413 error: Request Entity Too Large The requested resource /index.php does not allow request data with POST requests, or the amount of data provided in the request exceeds the capacity limit. In the error.log file I get: Invalid Content-Length, referer: [site]/index.php It doesn't seem this has anything to do with the actual size of the request, for the following reasons: a) I tinkered with the configuration of both Apache, and PHP. In Apache I tried increasing LimitRequestBody, and in PHP post_max_size, max_input_vars, memory_limit, and even upload_max_filesize. Every value is far beyond what is sent in a typical request that generates an error. b) The error pops up quite randomly, and often just hitting refresh allows me to get through. c) I checked the request in Fiddler to make sure everything is right with the content-length stated in the header, and the content of the request itself. Everything appears to be in order. A curious thing is that when I resent the exact same request via Fiddler, I never got the error. It seems I can only recreate it through a browser. So I'm at my wit's end here. I don't even know where to look for the problem anymore. I don't know if it's Apache or PHP (though I can't find anything in PHP error logs, so maybe that means Apache is the more likely culprit?), or PHP in general, or my Joomla site in particular (my bets were on Joomla until a recreated the error on a test script, with a very basic post form, though it does pop up much more often on the Joomla site). If anyone can give any advice on where to even begin with this, I'll be very grateful!

  Read the article

• FTP timeout but SSH is working?

  - by nmarti

  I have a problem in my server, when I try to connect via FTP to a domain, the connexion is VERY slow, and I get timeouts just listing files in a directory. When I try to connect to the domain folder using the root user account via SSH, it works fine, and I can download the files without problem. What can be wrong? I tried to reboot the server, also the office router, and nothing... It is a fedora core 7 server with proftpd. Can it be a filesystem problem? Thanks. CONNECTION LOG: Cmd: MLST about.php 250: Start of list for about.php modify=20120910092528;perm=adfrw;size=2197;type=file;UNIX.group=505;UNIX.mode=0644;UNIX.owner=10089; about.php End of list Cmd: PASV 227: Entering Passive Mode (***hidden***). Data connection timed out. Falling back to PORT instead of PASV mode. Connection falling back to port (PORT) mode. Cmd: PORT ***hidden*** 200: PORT command successful Cmd: RETR about.php Could not accept a data connection: Operation timed out.

  Read the article

• Can't create system image. 0x80780119 error after upgrade from 8 to 8.1

  - by cichy202

  I have upgraded my Windows 8 PC to 8.1 yesterday and it seemed like everything is working fine until I tried to create System Image. I got an error 0x80780119 saying that there is to little space on one of the partitions. I started looking into this problem and indeed one of the partitions does not meet the requirements. There are following partitions on my drive: DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Recovery 300 MB 1024 KB Partition 2 System 100 MB 301 MB Partition 3 Reserved 128 MB 401 MB Partition 4 Primary 74 GB 529 MB Partition 5 Primary 390 GB 75 GB Partition 1 has only 13MB free space. Partition 2 has 70MB free space, partition 3 is MSFTRES, partition 4 is my C drive with around 35GB free and partition 5 is not included in system image. Partitions were create like this during installation of Windows 8 - clean install from scratch. I am using UEFI so the drive is GPT formatted. So I thought, OK I can resize my C drive a little, move the partitions and expand the 1st one. I tried using GParted but it is not able to move the MSFTRES partition. It does not recognize the file system on it. So the question is: Is it possible to "clean up" the 1st partition in anyway? If not, is there anything special about MSFTRES partition? Or can I just remove it and create it a little further and just flag it as msftres with GParted?

  Read the article

• Get more space for redis in unix server

  - by DevTraveler

  In our app we have only windows servers beside the cases we use redis queues. This case , we use unix server created by amazon. As you can see we do not have a lot of space available and we want to make sure redis has enough space to work without getting stuck. I am little bit new in unix and after reading some data about the unix file system i still was not fully sure how can i give the redis drive (it is in the home directory) more space. I see the mnt that has a lot of space but read it is temporary for cd-rom and network drives. Can you help me figure out how to get more space to my redis ? If it is possible i prefer not to re-install the redis server. Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.7G 880M 89% / udev 7.4G 4.0K 7.4G 1% /dev tmpfs 3.0G 152K 3.0G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.4G 0 7.4G 0% /run/shm /dev/xvdb 414G 30G 364G 8% /mnt Thanks.

  Read the article

• Join multiple consecutive SQLite database dump files into 1 common database? Purpose: Search through ENTIRE Chrome Browsing History

  - by porg

  Google Chrome 's default web browsing history search engine only lets you access the records of the recent 100 days. Nevertheless in your application data, Chrome keeps your entire browsing history in SQLite database files, with the file naming scheme of "History Index YYYY-MM". I am looking for a way to search… …through my entire browsing history, …with sophisticated filters (limit search terms to certain fields such as URL, domain, title, body text; wildcard or regex terms, date ranges). … in … …either some ready-made software. eHistory came close, as it can limit terms to fields, but it lacks wildcards/regexes, and has the same limited time horizon as the default search. Beyond that, I could not find any suited Chrome extension or standalone (Mac) app. …or a command line to join multiple SQLite database files into one database, which I can then query (with the full syntax power). In the spirit of the pseudo code below: Preferred this way: sqlite --targetDatabase ChromeHistoryAll --importFiles /path/to/ChromeAppData/History\ Index* --importOnlyYetUnknownFiles Or if my desired feature --importOnlyYetUnknownFiles is not possible (feature could also be called "avoid duplicate imports by checking UIDs"), then by explicitly only importing files, of which I know, that they have yet not been imported into the ChromeHistoryAll database: cd ChromeAppData; sqlite --databaseTarget ChromeHistoryAll --importFiles YetNotImported1 YetNotImported2 YetNotImported3 All my queries I would then perform in the database "ChromeHistoryAll" P.S.: Additional question of general interest: Is there a way to perform a database query in a temporary database which was created on-the-fly from multiple files? Like: sqlite --query="SQL query" --targetDatabase DbAll --DBtemporaryInRAM --importFiles db1 db2 db3 This is surely not applicable for my Chrome question, as these History Index files have a combined file size of 500MB together, thus such a query would be of bad performance. But it could come handy in other situations.

  Read the article

• SSD won't boot anymore

  - by LordrAider

  Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

  Read the article

• Online FTP or file sharing service [on hold]

  - by Frede

  We need to share large files with clients, e.g. clients upload a large file, we modify it and later make it available for download. Up until now we've used FTP but this has a number of drawbacks. A lot of management of files and setting up accounts etc. We are therefore considering online alternatives. Requirements: Cheap, 8-) Easy to use, ideally just requiring a web browser, but also possible for power users to connect e.g. via FTPS/SFTP No registration requried for users to upload/download files. We ourselves of course need to be able to login an view uploaded files and upload new files. No per user fee High bandwidth. As files may be GBs in size both upload and download speed cannot be too slow Secure. Encryption during upload/download. No way for users to access uploaded files. Once a user has uploaded a file they (or anyone else besides us) should be able to access the file. To download files users get a link with a password. Ideally the link expires after a set time. No software installation We do NOT need any sync features, backup, versioning etc. Just a quick, easy, secure way for us to share files with our clients. Services like JustCloud, DriveHQ etc seems bloated and "too much" for what we need. What other alternatives exist? Thanks!

  Read the article

• Question marks showing in ls of directory. IO errors too.

  - by jaymoo

  Has anyone seen this before? I've got a raid 5 mounted on my server and for whatever reason it started showing this: jason@box2:/mnt/raid1/cra$ ls -alh ls: cannot access e6eacc985fea729b2d5bc74078632738: Input/output error ls: cannot access 257ad35ee0b12a714530c30dccf9210f: Input/output error total 0 drwxr-xr-x 5 root root 123 2009-08-19 16:33 . drwxr-xr-x 3 root root 16 2009-08-14 17:15 .. ?????????? ? ? ? ? ? 257ad35ee0b12a714530c30dccf9210f drwxr-xr-x 3 root root 57 2009-08-19 16:58 9c89a78e93ae6738e01136db9153361b ?????????? ? ? ? ? ? e6eacc985fea729b2d5bc74078632738 The md5 strings are actual directory names and not part of the error. The question marks are odd, and any directory with a question mark throws an io error when you attempt to use/delete/etc it. I was unable to umount the drive due to "busy". Rebooting the server "fixed" it but it was throwing some raid errors on shutdown. I have configured two raid 5 arrays and both started doing this on random files. Both are using the following config: mkfs.xfs -l size=128m -d agcount=32 mount -t xfs -o noatime,logbufs=8 Nothing too fancy, but part of an optimized config for this box. We're not partitioning the drives and that was suggested as a possible issue. Could this be the culprit?

  Read the article

• Determining how all memory is used in Windows Server 2008

  - by Mojah

  I have a Windows Server 2008 system, which has 12GB of RAM. If I list all processes in the Task Manager, and SUM() the memory of each process (Working Set, Memory (Private Working Set), Commit Size, ...), I never reach more than 4-5GB that should be "in use". However, task manager reports this server has 11GB in use via the "Performance" tab. I'm failing in determining where all that used RAM is going. It doesn't seem to be system cache, but I can not be sure. It might be a memory leak in one of the appliances, but I'm struggling to find out which one. The server's memory keeps filing up, and eventually forces us to reboot the device to clear it. I've been reading up on how RAM assignments work on Windows Server: RAM, Virtual Memory, Pagefile and all that stuff: http://support.microsoft.com/kb/2267427 What's the best way to measure? http://www.zdnet.com/blog/bott/windows-7-memory-usage-whats-the-best-way-to-measure/1786 Configure the file system cache in Windows: http://smallvoid.com/article/winnt-system-cache.html But I fear I'm stuck without ideas at the moment.

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• WebSphere hung threads, how can I track then down?

  - by Puzzled

  We have an application running on WebSphere (unfortunately it is 6.1 which is no longer supported, it has not yet been migrated in production to a later version) which becomes entirely unresponsive because of hung threads. As far as I can tell we entirely exhaust one of the thread pools. I have activated hung thread detection and I get a core/thread dump when hung threads are detected. The server can run for several days without problems but has crashed twice this week. When load the core/thread dump in "IBM Thread and Monitor Dump Analyzer for Java", it tells me that there are a certain number of hung threads (this time it was 2, last time 11) and multiple (usually around 40) threads "waiting on condition" and some running threads. I believe one of the thread pool has around that size (50). Now what I see in there are threads waiting for locks, having locks or in wait. Most of them show a stack track which always ends like this: at java/lang/Object.wait(Native Method) at java/lang/Object.wait(Object.java:231) Now, how can I track this down to either a server configuration problem, application issue, WebSphere problem or something else? How is this supposed to help me track down the problem when almost everything in there refers to IBM code? I cannot ask IBM's help as 6.1 is now an unsupported version of WebSphere and while work has been done to make it work under WebSphere 7 we are not yet ready to switch to it in Production yet.

  Read the article

• Web Server slows down (ASP.NET)

  - by mfeingold

  below is a question I posted on stackoverflow . as suggested by Martin Clarke I also post it here. We have a really strange problem. One of the servers in the server farm becomes really slow. We see a number of timeouts in the logs and overall response time is not where it should be (and is on other servers in the farm). What is also strange is that it is not just the web app - Just logging into the server takes up to 1.5 min to show you the desktop. Once you are in, the system is as responsive as ever - unless you try to launch something, i.e. notepad - it takes another minute to launch and after launch it works fine. I checked a number of things - memory utilization is reasonable, CPU is below 15%, windows handles, event logs do not show anything. Recycling the aps.net process does not fix it - it still takes over a minute to log in. Rebooting the server helped, but now it started to slow down again. After a closer look we found out that Windows Temp directory is full of temp files - over 65k files. This is certainly something to take care of. But my question is could it be the root cause of the sluggishness, or there is still something else lurking in the shadows? Edit After more digging I am zeroing in on the issue related to the size of temp directories. This article: (see the original post this thing will not let me include a second link) describes something very similar. It still does not answer the question why the server is still slow even there is no activity.

  Read the article

• Where can I legally obtain the 64bit version of Windows 8?

  - by Harsha K

  No, I am not looking to pirate. I bought a key through the Upgrade assistant (for just $15 due to the upgrade offer), but it downloaded an iso file that was between 2.3 and 2.5 GB. Which doesn't make sense to me, because the Evaluation version of Windows 8 x64 is closer to 3.4 GB in size. I assumed the Upgrade Assistant would be intelligent enough to realize that it is being run on a Windows 7 x64 machine and by extension, download the x64 code. Previously, I was able to legally download the ISOs (sans the keys, of course) from the Digital River host. I do not see an option to do that. I'm not interested in risking downloading a tampered ISO. I want to do it through Microsoft channels, but I just don't see how. As you may imagine, search terms such as "Windows 8 official download link" result in a plethora of obviously spyware infested piracy sites. If there's any non-exposing way for me to prove that I have legally purchased Windows and I'm genuinely looking for this answer, please let me know. For reference to what I am looking for it is similar to the answer given in this question for Windows 7: Where do I download Windows 7 (legally from Microsoft)?

  Read the article

• Best SSD tweak for Windows 7

  - by Nick Berardi

  I have seen many articles about tweaking an SSD, but many of them seem outdated, or too broad (read all Windows XP, Vista, and Windows 7 general tweaks). And I know that Windows 7 has been specifically tweaked for SSD by the Windows team, so I don't want to do something that was written for Windows XP in mind and end up circumventing something the Windows team has specifically designed in to Windows 7. So my question is what are the best SSD tweaks for Windows 7 that you have found to get the performance out of your drive? I hope to make a comprehensive list in the answers below so there won't be so much disinformation in the forums about what to do and what not to do. Here are a few that I see posted up on the forums alot: Disabling Superfetch. Yes or No Disabling Page File or limiting it to a really small size such as 500 MB. Disabling Indexing. Yes or No Disabling Defragmenting. Yes or No What are your thoughts do you have any that have worked for you? When providing an answer please do your best to back it up with a reason and possibly some documentation from MSDN, TechNet, or another credible source.

  Read the article

• Accessing CIFS shares from an OS X machine incredibly slow

  - by Aron Rotteveel

  This is a longshot, because this issue seems over-reported and unanswered on the internet (see references below), but it is about time this issue is permanently solved. The facts: Server: Windows Server 2008, acting as a file server Client: OS X Lion 10.7.3. Method of connecting: directly via IP through Finder: smb://192.168.1.100/share The problem: The initial connection attempt takes about a minute. After the connection is made, it takes one more minute to show the directories in Finder. After navigating to any other directory, it takes several seconds/minutes to parse the directory, seemingly based on the size of the contents. Actually, my entire Finder has this problem after connecting. When using Finder to show my desktop, it can literally take up to a minute to load. Obviously, this is not right. I have no clue how to fix this and would appreciate any help I can get. I am unsure about other relevant information I can provide, but if there is any, please let me know so I can update the post. I seem to be not the only one having this problem: Most importantly, an apple.stackexchange.com entry. Unsolved and unanswered. Several users on the Apple support forums. Users on EduGeek.

  Read the article

• Can I remove the original file while running "sort"?

  - by Spaceman

  I'm sorting a huge file, around 400 gigabytes. I'm running out of the disk space and I must do something quickly. Let's assume the original file is called original_file. So I execute (simplified) it as "sort original_file | gzip -c output_file" I use /home/tmp as a temporary dir. From what I see, there are a lot of intermediate files, like so: tmpA465 tmpB154 ... and so on. The smallest ones have size 12 megabytes. The largest have ~182 megabytes. So, it seems that the "sort" command have already split the original file into small pieces, and have sorted them, and now it is merging them into bigger parts (which will be, eventually, sorted as well). Please correct me if I'm wrong. Can I remove the original file right now without terminating the sort process? I've been waiting for a few days for that and it's important that the "sort" command will not fail and I will get the result file, finally. The OS is Ubuntu server 13.04, x64. Thanks!

  Read the article

• Linux RHEL : Making disk image efficiently

  - by TheProfoundGeek

  I have a linux box having RHEL. Its disk (hda1) is having free space of about 25GB. I have an another disk (hda2) which is of 250GB having another RHEL instance, it's partitioned for 200GB. Data on the disk occupies about 21GB of data. The image of hda2 needs to be taken and restored on other disk of same specs. What is the best way to make image file of the hda2? Ideally the images size should be around 25GBs as the actual data on the disk is just 21GB. I am aware about the following two methods. Method 1 : Raw Image dd if=/dev/hda2 of=/path/to/image dd if=/path/to/image of=/dev/hda3 Question 1 : Will the above method make a gigantic image of 250GBs? Is it efficient? Method 2 : Compressed Image. dd if=/dev/hda2 | gzip > /path/to/image.gz gzip -dc /path/to/image.gz | dd of=/dev/hda2 Question 2 : I tried the method 2, its taking too long. What are the pit falls of this methods? Which of the above method id efficient and why? Is there any other Linux utility which can do the job? Third party tools are no no.

  Read the article

• Restore only one partition of Windows Backup

  - by VitoShadow

  I have a MacBook Pro with an HD partitioned. This HD was divided in two partitions: the first was about 650 GB, with OS X installed, and the second one (created with BootCamp Assistant) was about 100 GB, with Windows 7 installed. I needed more space for Windows, so I decided to backup the Windows partition using the Windows backup tool, from Control Panel. I created an image of my partition, stored it in an external HD, and now I'm trying to use it. In order to give more space to Windows, I formatted the HD, and recreate a new partition table, with the first partition of about 250 GB (with OS X) and the second of the exactly size of the previous partition in which was installed Windows (about 100 GB); thre rest was empty space. In the second, I tried to restore the Windows backup. I plugged in the Windows Installation CD (with the HD with the backup connected to the computer), and select the option "Repair your computer". Then, I choose the image of the backup (automatically recognized), and I try to restore it. The problem is that now the System Recovery Tool wants to format all the HD, in order to install only Windows! In this way, I should lose everything, also the MacOS partition! Is there a way to install the backup only in the Windows partition?

  Read the article

• How to minimize the risk of employees spreading critical information? [closed]

  - by Industrial

  What's common sense when it comes to minimising the risk of employees spreading critical information to rivalling companies? As of today, it's clear that not even the US government and military can be sure that their data stays safely within their doors. Thereby I understand that my question probably instead should be written as "What is common sense to make it harder for employees to spread business critical information?" If anyone would want to spread information, they will find a way. That's the way life work and always has. If we make the scenario a bit more realistic by narrowing our workforce by assuming we only have regular John Does onboard and not Linux-loving sysadmins , what should be good precautions to at least make it harder for the employees to send business-critical information to the competition? As far as I can tell, there's a few obvious solutions that clearly has both pros and cons: Block services such as Dropbox and similar, preventing anyone to send gigabytes of data through the wire. Ensure that only files below a set size can be sent as email (?) Setup VLANs between departments to make it harder for kleptomaniacs and curious people to snoop around. Plug all removable media units - CD/DVD, Floppy drives and USB Make sure that no configurations to hardware can be made (?) Monitor network traffic for non-linear events (how?) What is realistic to do in a real world? How does big companies handle this? Sure, we can take the former employer to court and sue, but by then the damage has already been caused... Thanks a lot

  Read the article

• Seeking faster access/transfer times for accounting application

  - by Markaway

  Our accounting software, Sage 50, has been getting slower to open on workstations and reading the company file. The company file only contains 2 years worth of transactions, and we just cleared out 2011 so the file size has gotten a lot smaller. There are 10 users, 6 of which are on it all day, 4 are on and off throughout the day. Our network is entirely GbE and the switches are set to prioritize traffic on that port number. Watching network traffic, we barely use 40% of the network capability on the workstation, so I don't think that is our bottleneck. Our server contains two older Raptors Sata 2(3GB/s) 150GB in RAID 1. We were considering switching to SSD's, but a lot of what I read says to stay away from MLC's, especially for production environment and definitely avoid putting them in a RAID config. So would upgrading to newer Raptors with SATA 3(6GB/s) offer noticable benefits? What other options are out there that aren't so expensive? Trying to keep it to 200-300 per drive. We need at least 150GB, but going to 250-300GB would be better as it gives us more room to grow. We have about 30% space remaining on what we have now.

  Read the article

• Multiple if functions

  - by user2948699

  I have problem I'm hoping someone could help me with. I have five different text values in 5 cells. I am trying to combine these values into one cell with a comma in between each. However the trick is that if there is no value in (H6) then it must place the word "and" between the cell (F6) and (G6). If there is a value in (H6) then place the word "and" between (G6) and (H6). In the same statement I must also include If there is not value in (G6) then it must place the word "and" between the cell E6 and F6. Please see image attached. I am trying to get the highlighted statements into one cell. So multiple IF statements into one cell. Anyone? =IF(G8=0,(D8)&", "&(E8)&" and "&(F8),(D8)&", "&(E8)&", "&(F8)&" and "&(G8)=IF(H8=0,(D8)&", "&(E8)&", "&(F8)&" and "&(G8),(D8)&", "&(E8)&", "&(F8)&", "&(G8)&" and "&(H8))) I cant figure out the code. Many thanks. Alex Edit: The original image can be found here if size of the inlined is too small.

  Read the article

• How to ensure local file is up-to-date or ahead (dropbox sync) before truecrypt auto-mount it?

  - by user620965

  There are a lot tutorials out there that states that dropbox build-in encryption is not secure enought. That tutorials recommands to sync a truecrypt container file to have all files in it securely encrypted. This setup is know to be limited. You can NOT have that truecrypt container file mounted on the same time on more than one location - if you have inserted changes to the contents of the container in more then one location at a time then this setup produces a conflict on the container file in the dropbox system - resulting in one container file for each location. In my case that issue is not relevant - i do not use my data on more than one location at a time. I want to use the auto-mount feature of truecrypt on startup of windows 7 to have a zero configuration environment - and start working right away. But i want to ensure that the local truecrypt container file is up-to-date before truecrypt mounts it automatically - imagine you updated the contents of the container on your primary location and your secondary location was off for a long time. In that case it can take "a long time" till dropbox sync is complete (e.g. depending on your internet connection and the size of the container file). There is a option in truecrypt that ensures that truecrypt do not update the timestamp of the container file - which speeds up the sync, because dropbox client is doing a differential sync then instead of a time consuming full-sync. That is an improvement to that setup, but this do not fix my issue. The question is how to make the auto-mount function wait for the container file to be up-to-date (updated by dropbox)? In contrast: if the file was changed local, but remote file (in the dropbox cloud system) is still old (not jet updated by the sync process / or process is progress), should not make truecrypt to wait for the sync. Suggestions?

  Read the article

< Previous Page | 570 571 572 573 574 575 576 577 578 579 580 581  | Next Page >