Search Results

Search found 22835 results on 914 pages for 'applications menu'.

Page 575/914 | < Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• Shutdown issue on persistent LiveUSB

  - by John K

  A) Downloaded Ubuntu to a Windows 7 temp directory from: http://www.ubuntu.com/download/ubuntu/download (Ubuntu 11.10 - Latest version / 32-bit). The output was a .iso file. B) Created a bootable USB stick using Universal USB Installer: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/. Did not select "Persistent file". Result: Tried it in a Dell Latitude D630 Dell laptop: works every time, many startups and shutdowns. C) Repeated B) but with "Persistent file" set. Works once or twice, but then, just locks on the Ubuntu splash screen. E) Downloaded LiveUSB Install from http://live.learnfree.eu/download, which created a file on Windows 7 called live-usb-install-2.3.2.exe. F) Ran the above installer with "Persistent file" to a 4GB ScanDisk (formatted) thumb drive. Result: Worked pretty good for a while. Shutdown and rebooted several times. Changed items like creating a new directories - all worked. Then: Setup an Admin account with a password and no auto login. On next reboot, it required the password and logged in correctly. Tried to shutdown via the top left icon - Shutdown menu option. Key issue: Would not shutdown, but would always go back to the login prompt. Could successfully login. Finally, shutdown (which just put me back to the login window), and hard shutdown with the power switch. Result: On reboot, just locks on the Ubuntu splash screen. Questions (note, very new to Linux): Did I shutdown wrong (I mean prior to the hard power off)? Is the persistence option very unstable, or am I doing something else completely wrong?

  Read the article

• How can I triple boot Xubuntu, Ubuntu and Windows?

  - by ag.restringere

  Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

  Read the article

• Installing 13.04 on an EFI partition - Share with Windows 8?

  - by mengelkoch

  Information I've found here suggests that for my system, I need to install 13.04 into an EFI-type partition, since it needs to boot as UEFI. I also understand it is advisable to have only ONE EFI partition on the disk; I've read here that it is OK for Ubuntu and Windows to share the same partition (please confirm). When I try to install into the existing EFI drive, I get the message "No root file system is defined. Please correct from partitioning menu." Do I change the EFI boot partition to another type? Doesn't that defeat the purpose? If I change it to Ext4 Journaling File System, I am given the opportunity to define the '/' Mount point. I haven't proceeded beyond this point for fear I am going to destroy Windows 8 by altering this partition. BTW, I created three partitions in Windows before installing, per the helpful response to my previous question. But if I try to install into the partition I created for Ubuntu, I get the "No root file system..." error again.

  Read the article

• ProStar gaming laptop, which had Ubuntu 10.10, won't boot past Grub. Thoughts?

  - by Richard Zak

  At work we have some high-end gaming laptops we use for their dual GPUs. The machines have second generation i7 CPUs, and came with Windows 7. On most of them I installed Ubuntu 10.10, and all was fine. There were two laptops that I wanted to repurpose and wanted to reinstall the OS. It boots the CD (burned Ubuntu installation CD, I've tried 10.10, 11.10, and 12.04, as well as CentOS 6), and when Grub tried to boot the kernel, I just get a cursor blinking in the upper left corner of the screen. I tried the disabling of ACPI and the other items in the advanced menu, but nothing works. I could still boot to the current Linux installation though. I was able to install Windows 7 again, and use WUBI, but I think that works because it uses the Windows bootloader and not Grub. How could it have worked before and not now? I have confirmed that the CD is fine, as are the hard drive and CD drive. I also had the same problem with Debian, and had to boot through Windows 7 to install it.

  Read the article

• How to have Windows 7 remember a password for a Domain

  - by Kelly Jones

  About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

  Read the article

• XboxMP Helps You Find Multiplayer Games for the Xbox

  - by Jason Fitzpatrick

  Searching for the perfect versus or cooperative Xbox multiplayer game can be challenging–the game publisher says it plays four but what exactly does that mean? XboxMP catalogs games with detailed breakdowns of what the multiplayer experience actually entails. You can search first generation Xbox games, Xbox 360 games, and Xbox Live Arcade games with a variety of detailed criteria including the number of players it supports for local, system link, and online play (it may be a deal breaker, for example, that the only way to play the game with 4 players is to have two Xboxes or an Xbox live account). In addition to the multiplayer game data each game listing also includes addition information about the general game play including peripheral support and other features. Hit up the link below to check it out and, for more help finding multiplayer cooperative games, make sure to check out previously reviewed Co-Optimus. XBoxMP What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• Launching LibreOffice Files - Unusual Window Behaviour

  - by Mike

  Ubuntu 11.10 Unity. If I launch LibreOffice Files (ODS, ODT, ODP) with a double click in their home folders they launch with the appropriate application (Calc, Writer, Impress) however the application windows do not display the usual Close, Minimize, Restore buttons in the left hand corner. There is just a blank space where they should be. In the Unity launcher on the left there is not the expected white arrow next to the launcher icon and the open app is not seen by the ALT+TAB keystroke when you have multiple windows open. For example: if you have an app open in this way and say Firefox, if you minimize Firefox you are only left with the desktop and you have no way to locate the open LibreOffice app. Clicking the app's icon in the launcher simply opens another instance. A messy workaround is to click [Firefox] to a restored window and the LibreOffice app can be seen behind it allowing a mouse click to bring it forward. If I open the LibreOffice app from the launcher and then Open a file from its menu, it all behaves as expected. I don't find this as convenient; anyone know how to fix the bad behaviour?

  Read the article

• Is it considered poor programming to do this with xna components?

  - by Rob

  I created my own Menu System that is event driven. In order to have a loading screen and multithreaded loading to work, I devised this sort of implementation: //Let's check if the game is done loading. if (_game != null) { _gameLoaded = _game.DoneLoading; } //This means the game is loading still, //therefore the loading screen should be active. if (!_gameLoaded && _gameActive) { _gameScreenList[2].UpdateMenu(); } //The loading screen was selected. if (_gameScreenList[2].CurrentState == GameScreen.State.Shown && !_gameActive) { Components.Add(_game = new ParadoxGame(this)); _game.Initialize(); //Initializes the Game so that the loading can begin. _gameActive = true; } In the XNA Game Component that contains the actual game, in the LoadContent method I simply created a new Thread that calls another method ThreadLoad that has all the actual loading. I also have a boolean variable called DoneLoading in the XNA Game Component that is set to true at the end of the ThreadLoad. I am wondering if this is a poor implementation.

  Read the article

• Ubuntu update deleted entries from grub

  - by Kevin

  My computer currently has Fedora, Ubuntu, and Windows installed. I just updated Ubuntu 12.04, and on restarting, the Fedora entry was gone from GRUB. Ubuntu and Windows remained, though. I have looked at these threads: Fedora login gone after Ubuntu updates on a dual boot http://forums.fedoraforum.org/showthread.php?t=279221 GRUB's menu.lst deleted after a kernel update However, I cannot figure out how to mount the drive as suggested. It does not appear in the list on the left side of nautilus as shown in the links above. I also tried running the following as suggested above: sudo grub-install /dev/sdX sudo update-grub But this gave scary errors: /usr/sbin/grub-setup: warn: Attempting to install GRUB to a partitionless disk or to a partition. This is a BAD idea.. /usr/sbin/grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. /usr/sbin/grub-setup: error: will not proceed with blocklists. The highlighted drive below is where Fedora lives. Thanks for any help reversing Ubuntu's decision to delete this from GRUB.

  Read the article

• Defining formula through user interface in user form

  - by BriskLabs Pakistan

  I am a student and developing a simple assignment - windows form application in visual studio 2010. The application is suppose to construct formulas as per user requirement. The process: It has to pick data from columns of Microsoft Access database and the user should be able to pick the data by column name like we do in a drop down menu. and create reusable formulas in it ( configure it once and can change it again). followings are column titles from database that can be picked for example. e.g Col -1 : Marks in Maths Col -2 : Total Marks in Maths Col -3 : Marks in science Col -4 : Total marks in science Finally we should be able to construct any formula in the UI like (Col 1 + Col 3 ) / ( col 2 + col 4) = Formula 1 once this is formula is set saved and a name is assigned to it by user. he/she can use the formula and results shall appear in a window below. i.e He would be able to calculate his desired figures (formula) by only manipulating underlying data on the UI layer....choose the data for a period and apply the formula and get the answer Problem: It looks like I have to create an app where rules are set through UI....... this means no stored procedures are required in SQL.... please suggest the right approach.

  Read the article

• Installing ubuntu 12.04 on macbook pro9,2

  - by stariz77

  I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

  Read the article

• Are Windows partitions gone?

  - by Gigili

  I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

  Read the article

• Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

  - by Andy

  I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

  Read the article

• NetBeans has broken interface with OpenJDK

  - by Krzysztof Stanislawek

  Sorry for English. Usually (say, at 4/5 of times), when I start NetBeans, interface is partially broken. For example, menu items are appearing and at once disappearing after click; some parts of editor are also blocked for cursor actions. Another issue is broken Options window - I can show it only once for NetBeans execution. There are more similar issues. $ java -version java version "1.7.0_55" OpenJDK Runtime Environment (IcedTea 2.4.7) (7u55-2.4.7-1ubuntu1~0.13.10.1) OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode) Version of NetBeans is 7.0.1. Linux version is Mint 16. I use Mate. I had the same issue at other computer, at the same operating system. I know that installing Sun version of Java could help, but I also know that there shouldn't be such issue with OpenJDK. Also, I had other problem with NetBeans and Sun Java 8 - NetBeans suddenly crashed before he fully started, so I want to stick with OpenJDK. What causes my problem? Should I use other version of NetBeans/OpenJDK?

  Read the article

• Windows 8 Store App Crash Logs

  - by David Paquette

  I was recently working on a Windows 8 app, and the application was crashing occasionally.  When resuming the application, the app would crash and close immediately without providing any feedback or information on what went wrong.  The crash was very difficult to reproduce, and I could never get the crash to occur when I was debugging through Visual Studio.  My app was crashing, and I had no idea what was going wrong!  HELP!!! After doing some digging, I found that when a Windows 8 Store App crashes, an error is logged in Windows Administrative Events.  You can view the details of any app crash by launching the Event Viewer and selecting Administrative Events under Custom Views.  The Source of the error will be listed as AppHost.  AppHost is the process that runs your Windows 8 Store App.  The error details contain all the information you would expect to find, including a stack trace and line numbers.   Windows 8 Tip:  A shortcut for launching the Event Viewer in Windows 8.  Right click on the bottom left corner of your desktop (where you normally click to go to the Start Screen).  A menu will appear with shortcuts to a number of common system tasks such as Event Viewer, Task Manager, Command Prompt, and Device Manager.

  Read the article

• Lost Windows 7 files

  - by Pader

  My intention was to have a dual boot system with Ubuntu and Windows 7. Obviously I did something wrong because although I had a system menu on booting (is it normal to appear DOS-like?) which gave me an option of booting into windows 7, I was unable to do so. Also, when I booted into Ubuntu, my Windows 7 drive was not available. The Windows 7 drive was an internal 1TB drive partitioned into a 200GB (OS) and a second partition making up the remainder. I was still unable to access this Windows 7 drive even after deleting Ubuntu as I kept getting an 'requires an NTFS drive' error, or something similar. I could not even re-install Windows 7 as the disk was not recognised. I did eventually get the drive back by but I cannot for the life of me remember how. I did try to recover my lost W7 data using Ontrack Easy Recovery (which has always been succesfull in the past for post format recovery) but it would not recognise the 1TB although it was now formatted as NTFS. From other posts on this site, I gather that this is considered a 'Windows 7 Site' problem by Linux users. However, I would dearly love to recover some of my lost Windows 7 files. I had resigned myself to a lot of lost personal data but I happened to notice that a 2TB drive I had connected through a USB docking station had been repartitioned. It must have happened when I installed Ubuntu as I can think of no other explanation. I certainly do not remember consciously requiring Ubuntu to do this. The additional two partitions on the 2TB drive, the original Windows

  Read the article

• Graphical glitches on grub and ubuntu desktop

  - by Klyn

  I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

  Read the article

• Cannot Boot, How to recover

  - by Kendor

  Am running 11.10 64-bit with Gnome-shell. Something happened late Friday whereby my machine never gets to the login screen. I do get to an Ubuntu splash logo, after that I get a text screen that it hangs on. The screen is referring to issues with mounting various network resources, including VMWare and also some references to my NAS that are in fstab. If I hit "esc" I can get to the GRUB menu and into recovery console. If I try to do a file system check, I run into a similar error screen that I see when trying to boot normally. A possible clue here is that during my last good session I made some mods to the /etc/hosts file to reference another system which I'm connecting to with Synergy. I don't believe I have hardware issues as I'm able to boot properly with a Live USB and connect to my network/Internet. A few more tidbits. I have regular Dejadups backups on my NAS. I have a good Clonezilla whole drive image which is 4-6 weeks old.. My home is encrypted. I thought I'd try blowing away my hosts file via live USB, but when I mounted the hard drive everything was read-only and I couldn't figure out how to replace it. P.S. I logged in via CLI and modded the host file to remove the entry I'd made, to no avail. System continue to gets stuck on the following: CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel version 3.1s Would love some sober advice on how to attack this.

  Read the article

• Massive Xubuntu desktop malfunction

  - by viktiglemma

  I'm using Xubuntu 11.04. Before everything worked fine, but when booting today the following happened: 1) Window focus does not leave the first-opened program. This means that if I keep Firefox open, and open a terminal, window focus will never be transferred to the terminal. (EDIT: if I open a terminal first, and then open Firefox, Firefox steals focus) 2) Window menus have disappeared. The maximize, minimize, etc., buttons and menu are gone. 3) In Xfce Settings Manager, the "Window Manager" settings window is empty. There is just a gray screen there, so I cannot modify any window settings. 4) The keyboard shortcuts I had previously defined using the Settings Manager do no longer work. Further, ALT-TAB no longer works for cycling between windows. 5) The mouse pointer does not show when I first log in. I have to log out and log in again (with an invisible pointer) before the mouse shows itself. EDIT: 6) I cannot resize or move the Thunderbird window, but I can move the Firefox window What can I do to troubleshoot this?

  Read the article

• GTK app: How do I create a working indicator with Qt/C++?

  - by hakermania

  I've tried in 2 forums, but I had no luck so far. So, I am using Qt IDE in order to build my application so as to participate to the Ubuntu Showdown contest. In my application, I've done the following: void show_app(MainWindow *data) { //this works fine: app_indicator_set_status(appindicator, APP_INDICATOR_STATUS_PASSIVE); //this crashes the application: data->show(); } void MainWindow::make_indicator() { if(appindicator){ //appindicator has already been created return; } appindicator = app_indicator_new("Format Junkie Indicator", "formatjunkie", APP_INDICATOR_CATEGORY_APPLICATION_STATUS); GtkWidget* showapp_option; GtkWidget* indicatormenu = gtk_menu_new(); GtkWidget* item = gtk_menu_item_new_with_label("Format Junkie main menu"); gtk_menu_item_set_submenu(GTK_MENU_ITEM(item), indicatormenu); showapp_option = gtk_menu_item_new_with_label("Show App!"); g_signal_connect(showapp_option, "activate", G_CALLBACK(show_app), this); gtk_menu_shell_append(GTK_MENU_SHELL(indicatormenu), showapp_option); gtk_widget_show_all(indicatormenu); app_indicator_set_status(appindicator, APP_INDICATOR_STATUS_ACTIVE); app_indicator_set_attention_icon(appindicator, "dialog-warning"); app_indicator_set_menu(appindicator, GTK_MENU (indicatormenu)); } So, basically I am trying to make a simple indicator entry, which, on click, it will hide the indicator and display the application. The indicator can be successfully hidden using the PASSIVE thingy over there, but, during the call data-show();, the application crashes. Any help on what I am doing wrong would be appreciated! Also, please help me to correct this problem I'm facing (alternatively, I will migrate to the old and good tray icon (it works fine in 12.04, anyway) which I can handle very easily and efficiently)

  Read the article

• Ubuntu won't start - blank screen with flashing white cursor

  - by loomy

  My laptop is dual-booted with Windows 8 on one partition and Ubuntu 12.04.3 on the other. I've searched for my issue already, but nothing I've found so far has solved the problem. Since last week, when I try to boot Ubuntu from GRUB, I am taken to a purple screen (as usual), but then to a black screen with a blinking white _ cursor. I've tried leaving it, but nothing else happens. When I hold Shift and edit the GRUB entry to change 'quiet slash' to 'text', the back screen instead asks for my login and password. When I put them in, it tells me the date of my last logon, and then waits for further commands. Being very very new to Ubuntu, I have no idea at all what to try out at this point. I tried to launch FailsafeX, but while that was beginning, it said "unable to run server /usr/bin/x" No such file or directory", then shortly after returned to the recovery mode menu. Pressing Ctrl+Alt+Delete goes through an Ubuntu loading screen, then the laptop then restarts. Any suggestions will be very appreciated, and apologies if this is a common issue that has been answered a million times before.

  Read the article

• Have Windows Automatically Login Without Entering Your Password

  - by deadlydog

  If you are like me and don't want to have to enter your password each time Windows loads, you can have Windows start up without prompting you to enter a user name or password.  The simple (and BAD) way to do this is to simply not have a password on your user account, but that’s a big security risk and will allow people to easily remote desktop into your computer. So, first set a password on your windows account if you don’t already have one.  Then select Run... from the start menu (or use Windows Key + R to open the Run window) and type control userpasswords2, which will open the user accounts application.   On the Users tab, clear the box for Users must enter a user name and password to use this computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use to automatically log into Windows.  That's it.    You may also want to make sure your screen saver is not set to prompt you for a password when it exits either. Now your computer is secure without getting in your way.

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

• Dual boot on Hp Envy Ultrabook

  - by phodu_insaan

  I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

  Read the article

< Previous Page | 571 572 573 574 575 576 577 578 579 580 581 582  | Next Page >