Search Results

Search found 16472 results on 659 pages for 'computer scientist'.

Page 579/659 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

• Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

  - by Dylan Yaga

  I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

  Read the article

• Reduce "Metafile" memory usage?

  - by Jay Conrod

  My work computer (Windows 7 64-bit) spends a lot of time swapping memory when I switch between programs. This surprises me since I have 4 GB of RAM, and the programs I use aren't particularly RAM hungry (Outlook, Emacs, p4win, Firefox, various build tools). I downloaded RAMMap, and it shows over a gigabyte of memory used by "Metafile". From the Sysinternals blog: Metafile is part of the system cache and consists of NTFS metadata. NTFS metadata includes the MFT as well as the other various NTFS metadata files. ... In the MFT each file attribute record takes 1k and each file has at least one attribute record. Add to this the other NTFS metadata files and you can see why the Metafile category can grow quite large on servers with lots of files. So I understand what the "Metafile" data is... I work on large builds comprising hundreds of thousands of files (none are that big, but they add up to several gigabytes). My question is how can I reduce the amount of memory used by "Metafile"? I'm not actively using all those files at once, so why does Windows need to keep info in RAM? Restarting my machine every time I sync a new build is really annoying.

  Read the article

• AMD Phenom II X2 555 BE, core unlock suddenly not working?

  - by user328271

  I've had a Phenom II X2 555 BE for around 2 - 3 years. When I got it, I immediately core unlocked it with my ECS A880GM-A3 mobo, which makes it turn into a Phenom II X4 B55. A few days ago, I installed Windows 7 64 bit to compensate for my 4 gigs of ram. When I start my system with its cores unlocked, it will restart after the BIOS screen. If I disable the core unlock, it boots to OS just fine. My question is: Does 64 bit OS makes a difference in core unlocking? Does my 3rd and 4th core burnt out? Also extra info: I tried core unlocking but keeping the 3rd and 4th core disabled and it still won't boot into OS. Could it be motherboard problems? Sorry for bad English. I will try to give additional information if needed. Thanks! Also it is worth mentioning I'm no computer expert but I tried to make my explanation as short as possible. I also asked my question on TomsHardware, but I had no answer till now so I decided to ask here too. anyone...?

  Read the article

• Rate limiting bandwidth per IP

  - by Yohan

  First, I am not that good with computer. I even had problem with Windows PC. Right now I own a restaurant which happened to offer free internet. My ISP has my connection setup using a Ubuntu 11.1 box. IP Address is 192.168.1.16 with netmask 255.255.0.0, dns is 192.168.1.1 and gateway is 192.168.1.1. My problem is that my customers complains all day about slow network. When I received that kind of complain, the first thing came to my mind is to scout my area and find out who is the culprit, and ask him not to waste our bandwidth. Now, it is getting bored scouting people around, and I need to implement to my Linux box to limit bandwidth. I don't care if their provider can't be faster, but I want to limit 70kbit for each person. More annoying are people who use flashget and torrents. Usually they consume the biggest bandwidth. My question, how can I limit that? Please guide me in easy way. I've spent few days reading tc documents but doesn't understand a thing. I am using Ubuntu 11.10 Basically, I want all my customer get 70kbps each, no matter what.

  Read the article

• Arch Linux: eth0 no carrier - network fails at boot

  - by user905686

  The problem My computer is connected to a network where dhcp is required. So my network configuration in /etc/rc.conf looks like interface=eth0 address= netmask= broadcast= gateway= My deamons are DAEMONS=(!hwclock syslog-ng network netfs crond ntpd) With this configuration, Arch hangs at boot a long time at "Network" (Still it says "[done]", but after boot I have no connection). I found out two workaround: Workaround 1 remove network from deamons run mii-tool --reset eth0 and dhcpcd eth0 after boot (somehow it does not work when placing these commands in /etc/rc.local. Then dhcp work very quickly (because of the reset!). Before executing the first command, ip link show eth0 has "NO CARRIER" in output. Afterwards, it doesn´t. (Also, mii-tool first shows "no link", afterwards eth0: 10 Mbit, half duplex, link ok. Workaround 2 Change network configuration to interface=eth0 address=x.y.z.21 netmask=255.255.255.0 broadcast=xxx.y.z.255 gateway=x.y.z.254 whereas x, y, z build the specific adresses of the network (Though dhcp is used, I get a static ip). Add the commands mii-tool --reset eth0 and dhcpcd eth0 to /etc/rc.local Now network starts quickly at boot (though I don´t know if successfully), the commands in /etc/rc.local are executed and the connection is fine after login. What to do? So the problem seems to be that dhcpcd stucks at "wating for carrier" or sth. I do not like the workaround, because some deamons need network (though they seem to start). What can I do to have eth0 ready for dhcp at boot? Or is there another problem?

  Read the article

• Windows Server 2008 R2 running at a snail's pace

  - by Django Reinhardt

  Really weird problem here. Our main web server has started running at a snail's pace, for absolutely no reason we can discern. Even after restarting the machine, when there's no little or no ram usage and CPU usage is fluctuating between 0 and 30%, simple tasks, like opening Internet Explorer, or waiting for My Computer to open, take forever. There are no processes hogging system resources that we can see... the machine itself is just exhibiting extremely slow behaviour. I've never seen a machine do this. A lot of security updates had built up, so we decided to let Windows install them. When we looked through the history upon restarting, though, they had failed with error code 800706BA. I don't know if this could be related or not. Any help in this matter would be greatly appreciated. As mentioned in the title, we're running a Windows Server 2008 R2 machine. It's also running SQL Server and IIS. It has 16GB of RAM and a decent Quad Core processor. It's also been fine until now -- and we haven't changed a thing. Thanks for any help.

  Read the article

• Weird problem with Visual C++ 2010 Express

  - by Robert Vella

  This has happened before on my Vista Premium installation, and now it's happening on my Windows 7 Home Premium installation. Basically everytime I install Visual Studio Express 2010, it works fine for a random amount of time but then suddenly starts to hide from my sight -- that's the best way I can explain it. VS does not crash, and from what I can tell it does not freeze either; It continues to work, I can even "minimize" and "maximize" it; I simply cannot see it nor can I interact with it any meaningful way. Also: After the "crash" there are no logs in: Root\Program Files (x86)\Microsoft Visual Studio 10.0\Microsoft Visual C++ 2010 Express - ENU. Nor any other files created at the time of the crash. There are no traces in the event viewer. The program seems to be functioning perfectly in the process manager. If I reinstall Visual C++, it works normally for a seemingly random period of time before going cookoo again. I am stumped. This has never happened to me before, with any other program. And yet I doubt it really is a problem with Visual C++; More like something general that seems to have picked on it for some reason. Still, after a clean install with a new OS, I'm kinda thinking there's something wrong here. Any help would be appreciated, altough I suspect that the answer to this question will make me feel embarassed. P.S. Not sure if it helps, but I think around the same time I started having problems (On both installations) with windows turning off the display when I leave the computer, and then seemingly crashing when it turns it on again -- in fact when I interact with it it seems to be responding to my commands without actually display anything.

  Read the article

• Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

  - by Kristopher Johnson

  I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and Apple wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message: Adding this device to this computer failed Adding the device failed resulting in an unknown error. The reported error code is 0x80070015. Contact your device manufacturer for assistance. I've run Windows Update and Apple Software Update. I've also tried reinstalling the drivers from the Snow Leopard DVD. The mouse and keyboard both work fine when I boot into Mac OS X. FWIW, after many, many repeated tries, I eventually got it to work. I don't know why. So while my problem is solved, I'd still like to get an "answer" as to why trial-and-error seems to be the only approach. The keyboard, in particular, was hard to get set up. A few times, Windows would apparently recognize it and prompt me to enter the pairing code, but then it would time out after a couple of seconds (not long enough to enter the code). Grrrr.

  Read the article

• Anonymous file sharing without login window, from Windows 7 server to XP clients

  - by Niten

  I'm trying to provide machines on a small LAN with read-only, anonymous access to files shared from a Windows 7 workstation (let's call it WIN7SVR). In particular, I don't want clients to have to deal with a login window when they navigate to, e.g., \\WIN7SVR in Windows Explorer, but we do not have a domain and synchronizing accounts between the server and clients would be intractable. There are both Windows 7 and Windows XP clients that need access to these shares. I got this working for Windows 7 clients by just enabling the Guest account on WIN7SVR and setting appropriate share permissions. Other Windows 7 machines automatically try logging in as Guest, it seems, so their users don't have to deal with the login window. The problem is with the XP clients--they can access the server if the user enters "Guest" in the login window, but I don't want users to have to do that. So from what I gather, in my limited understanding of Windows file sharing, this boils down to granting null sessions access to file shares on WIN7SVR. But I've had no success so far on that front. I've tried all the following in the local group policy editor on the Windows 7 server: Set Network access: Let Everyone permissions apply to anonymous users to Enabled Set Network access: Restrict anonymous access to Named Pipes and Shares to Disabled Added the names of corresponding shares to Network access: Shares that can be accessed anonymously Added "ANONYMOUS LOGON" to Access this computer from the network under User Rights Assignment Any advice would be highly appreciated... I'm mostly a Unix guy, so I feel somewhat out of my league with Windows file sharing. I do understand that any sort of anonymous access to file shares isn't generally ideal from a security standpoint, but it's the most practical solution for us in this case, and access to our network is well enough controlled that share-level security isn't a concern.

  Read the article

• Is this normal or does my AVG anitivirus have a virus? [closed]

  - by user390480

  Possible Duplicate: Computer is infected by a virus or a malware, what do I do now? [Note: This is not a duplicate and should not be closed as a duplicate as this is nothing like the other question. I am not asking if I have a virus, nor am I asking "what do I do now". I know that I have a virus and I know what to do. However, I am asking if these are normal AVG ads or if it has been taken over.] My Windows XP PC started acting strange and I am right now actually in Linux running off of a USB drive. I am running Avast under Linux and it has discovered some viruses on my XP drive. Some of the strange things happening in XP were: I could not get to Google.com My Hosts file was set to hidden and read only My Hosts file had an entry of ::1 And AVG had ads in it I've never seen before. Maybe it is normal but I Binged for AVG anti-virus and become.com but found no information. (The red lines and question mark are by me) Any thoughts?

  Read the article

• What does this example bash startup script do?

  - by Dimitri

  I am trying to set up GNU Octave on my computer (Mac OS X 10.7.4). I am newbie in using Terminal and I need help to understand what the following script actually does: if [ -f ~/.bashrc ];then<br> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;. ~/.bashrc<br> fi<br> PATH=$PATH:/usr/local/bin<br> BASH_ENV=~/.bashrc<br> export BASH_ENV PATH<br> export GNUTERM=aqua<br> alias octave="/Applications/Octave.app/Contents/Resources/bin/octave"<br> alias gnuplot="/Applications/Gnuplot.app/Contents/Resources/bin/gnuplot"<br> (taken from here: http://wikibox.stanford.edu/me112/index.php/Main/OctaveMatlabNotes) So this script begins with the simple conditional if statement. I don't understand the conditional expression - what is -f and .bashrc? What the statement . ~/.bashrc actually does? Then 2 variables are defined PATH and BASH_ENV. Why are they exported? Why GNUTERM=aqua is exported even if it's not defined anywhere? All I need is a script that would allow me to run Octave by simply typing octave in the terminal. I don't need an alias for the gnu plot. Thanks

  Read the article

• What could cause these "failed to authenticate" logs other than failed login attempts (OSX)?

  - by Tom

  I've found this in the Console logs: 10/03/10 3:53:58 PM SecurityAgent[156] User info context values set for tom 10/03/10 3:53:58 PM authorizationhost[154] Failed to authenticate user (tDirStatus: -14090). 10/03/10 3:54:00 PM SecurityAgent[156] User info context values set for tom 10/03/10 3:54:00 PM authorizationhost[154] Failed to authenticate user (tDirStatus: -14090). 10/03/10 3:54:03 PM SecurityAgent[156] User info context values set for tom 10/03/10 3:54:03 PM authorizationhost[154] Failed to authenticate user (tDirStatus: -14090). There are about 11 of these "failed to authenticate" messages logged in quick succession. It looks to me like someone is sitting there trying to guess the password. However, when I tried to replicate this I get the same log messages except that this extra message appears after five attempts: 13/03/10 1:18:48 PM DirectoryService[11] Failed Authentication return is being delayed due to over five recent auth failures for username: tom. I don't want to accuse someone of trying to break into an account without being sure that they were actually trying to break in. My question is this: is it almost definitely someone guessing a password, or could the 11 "failed to authenticate" messages be caused by something else? EDIT: The actual user wasn't logged in, or using a computer at the time of the log in attempts.

  Read the article

• How I can fix the "Display Driver has stopped responding and has recovered"?

  - by Vitor Rangel

  I'm using a GeForce GTX 580, with Windows 7 64-bit. The driver version of the GTX is 301.42. The problem happens after a few minutes, when I'm playing specifc games. It won't happen in all games - And I don't have any idea why these games doesn't work. The games that doesn't work: Battlefield 3, Civilization V, Sniper Elite V2. The games that work: Mass Effect 3, Crysis 2, Team Fortress 2, Left 4 Dead 2, Skyrim, L.A. Noire. As you can see, it's not a problem of "The games that demand more stop working". I've tryed updating the driver of the graphics-card, the bios of the motherboard, even formated my computer (It was needing it) and instaled every driver in the last version possible. This problem happens since I bought my graphics-card, 6 months ago. After a few minutes, from 10 to 20, the pixels in the monitor become strange, with random colors and effects, like it was broken. Then, everything goes black, and the message appears "Display Driver has stopped responding and has recovered". After that, I need to close the game and start again. I am not overclocking, and my temperature never goes higher than 70ºC.

  Read the article

• Daisychain external USB drive to WD My Book World Edition (Blue rings)

  - by d03boy

  I recently bought a new My Book Essential 1TB (WDBACW0010HBK-NESN) to daisychain to my older My Book World Edition 500GB (blue rings) with one of the version 01.xx.xx firmwares. At first when I connected the USB drive to the MBWE, it showed up in the System Summary section of the administration page without any issue. I was able to set up a new share on the new drive. The administration website moved very, very slow though. The administration pages became nearly unresponsive during this setup process. Once the share was set up I could access the new share but again, it was very slow, now through Windows Explorer. I looked around the internet and it seems that this is caused by the USB drive being formatted with NTFS. I tried reformatting it (again, as NTFS) just to double check and the same problem occurred. I then tried FAT32 but realized it would only support files of approximately 2GB and that is not acceptable for me. I decided to try a firmware upgrade on the MBWE to version 02.00.19. The firmware upgrade completed successfully but now the MBWE does not display the USB drive in the System Summary like it did with the earlier firmware version. The USB drive works perfectly fine when connected directly to my computer. Is there a way to solve this issue?

  Read the article

• How to get data from a borked Windows Home Server

  - by harhoo

  Yesterday we had a power surge, followed by a power outage. This left my WHS borked: powering on just gives to a flashing blue light (the led on the power supply also flashes green) - no fan or boot activity, nothing. I urgently needed some files off there in the short term (and the 500GB of photos, music, personal video etc in the long term) so I took the hard drive out and put it in my computer. The files and folders showed up, but I couldn't access them - clicking on an image gave an invalid image error in Picasa, I couldn't play MP3s etc. I changed the ownership and permissions of the files, still nothing. I booted in with a LiveCD, the same: files appear, but won't open. Is there anything else I can do? I'm now wondering if it was just the power cable that's broken, but if so, why can;t I access my files from the hard drive? If it is the power cable, and I replace that and the hard drive, will I have done any harm messing around with ownership and file permissions?

  Read the article

• Windows 7 64 bit Installation freezes after a while durig the setup

  - by vinz243

  I have a windows 7 32 bits on my computer. Because i have 5 gb of ram (kingston) on my asus M2N motherboard and only 3 were able to be used, I bought W7 x64 and install it. It loads the wizard, but after a while, it freezes, and I have to force reboot. It first crashed while unzipping w7 files, but if I wait a while on the terms page for example, it can crash before, which make me think that it is a matter of time. I remember I had the same issue while booting on Ubuntu x64, it crashed randomly but not load completely. No bip or other messages. Configuration: Software OS (before) W7 x86 Pro New OS : W7 x64 Pro Antivirus : avast (bios verification ?) BIOS 03/27/2008 - v08.00.12 Hardware : Motherboard : Asus M2N Processor : AMD Athlon 64 dualcore @ 2.6 GHZ Memory : 5120 MB ((2 + 2) + (1)) NOTES : I ran a memory test using openSUSE cd, though i have not finished it, it ran. EDIT: I tried not to run the setup but wait, and i get the BSOD : A problem... TL;DW IRQL_NOT_LESS_OR_EQUAL If it is.. TL;DW ***STOP: 0x0000000A (0x0000000000000000,0x0000000000000002, 0x0000000000000001, 0xFFFFF8001A49ED1F)

  Read the article

• Wake on LAN Problem

  - by Caley Woods

  I'm working to get wake on lan (wol) working so that we can do some power management at my workplace. I've enabled WOL on a test laptop running Win 7 x64 and put it to sleep and hibernate both with no luck. I'm using a 3rd party utility and I've ran wireshark on the test laptop with it booted up and I can see the WOL packets coming in and the machine refuses to wake from sleep or hibernate. I thought maybe it was the computer I was using so I had another Win 7 x64 laptop nearby and I tried it, same scenario. We're in a cisco environment and I believe I gotten all the pieces in place since I'm seeing the WOL packets come through. I've tested two machines on the same subnet to eliminate the possibility of a misconfiguration on the switch, this also has the same behavior. The laptop models are a Compaq 6510b and 6730b. Is there something I'm missing? I'm trying this across UDP port 50200 since that's the port the actual management system will use after I get it working.

  Read the article

• plesk: how to configure reverse proxy rules properly?

  - by rvdb

  I'm trying to configure reverse proxy rules in vhost.conf. I have Apache-2.2.8 on Ubuntu-8.04, monitored by Plesk-10.4.4. What I'm trying to achieve is defining a reverse proxy rule that defers all traffic to -say- http://mydomain/tomcat/ to the Tomcat server running on port 8080. I have mod_rewrite and mod_proxy loaded in Apache. As far as I understand mod_proxy docs, entering following rules in /var/www/vhosts/mydomain/conf/vhost.conf should work: <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests off RewriteRule ^/tomcat/(.*)$ http://mydomain:8080/$1 [P] Yet, I am getting a HTTP 500: internal server error when requesting above URL. (Note: I decided to use a rewrite rule in order to at least get some information logged.) I have made mod_rewrite log extensively, and find following entries in the logs [note: due to a limitation of max. 2 URLs in posts of new users, I have modified all following URLs so that they only contain 1 slash after http:. In case you're suspecting typos: this was done on purpose): 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) init rewrite engine with requested uri /tomcat/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (3) applying pattern '^/tomcat/(.*)$' to uri '/tomcat/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) rewrite '/tomcat/testApp/' - 'http:/mydomain:8080/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) forcing proxy-throughput with http:/mydomain:8080/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (1) go-ahead with proxy request proxy:http:/mydomain:8080/testApp/ [OK] This suggests that the rewrite and proxy part is processed ok; still the proxied request produces a 500 error. Yet: Addressing the testApp directly via http:/mydomain:8080/testApp does work. The same setup does work on my local computer. Is there something else (Plesk-related, perhaps?) I should configure? Many thanks for any pointers! Ron

  Read the article

• Codecs, Premiere Pro & Quicktime: Import or Play Error

  - by Nchpmn

  Original Question I've been using a FS-H200 (not the Pro variant) recorder with a JVC ProHD camera. I have been shooting with the DTE FORMAT to Quicktime (.mov). I copied the files to an external hard drive and am now trying to edit. The files will play back in VLC, as they would be expected to. However they will not import into Adobe Premiere CS5.5, instead giving an error: Unsupported format or damaged file. Quicktime gives the following error when attempting to play the files: Error -2002: a bad public movie atom was found in the movie (Filename) To try and fix this, I have installed the following codec packs: K-Lite Codec Pack 64-bit Full (version 5.9, latest) K-Lite Codec Pack 32-bit Full (version 8.4, latest) MainConcept Codec Suite (Broadcast) v5.1 for Adobe CS5 Reinstalled Quicktime with new download from Apple The same errors and problems still exist. From this I can assume that there is an issue with Quicktime and that is what Premiere is using as an encoder/decoder for the codec. Is there any way to fix this? From looking at the "Codec Information" from VLC: Stream 0 Type: Video Codec: MPEG-1/2 (mpgv) Language: English Resolution: 1280 x 720 Frame Rate: 25 Stream 1 Type: Audio Codec: PCM S16 BE (twos) Language: English Channels: Stereo Sample Rate: 48000 Hz Bits per sample: 16 Other computer specs: Windows 7 Professional 64-bit (SP1) Gigabyte Z68X-UD3-B3 Intel i7-2600K 16GB DDR3 2TB WD 7200RPM SATA 6Gb/s LaCie d2 Quadra 2TB v3 7200RPM (External HDD) NVIDIA GeForce GTX 560 Ti Golden Sample Updates 2012-03-11 @ 2050 AEDT MPEG Steamclip doesn't recognise, play or convert the footage. File open error: unrecognised file type. [Open Anyway] File open error: can't find video or audio tracks. 2012-03-24 @ 1920 AEDT Had to transcode the footage. :(

  Read the article

• Hard Drive that was used before not detected or accessible in Windows 7

  - by Anders

  Hello SU: My PC crashed for some unknown reason, and I am still working on what caused that. However, I pulled my main (windows) drive from my computer and hooked it up to my roommate's machine and was able to pull the data I needed off of it (i.e. the drive is good). I hook up his drives as they were, I had to turn off his machine and unplug his secondary drive to hook mine up, boot his machine and there is no second drive available in windows explorer. I opened Device Manager to see if for some reason it's drive letter got un-assigned, but there is nothing listed in there except his primary hard drive, his optical drive and one other optical drive which I believe is the virtual drive Daemon Tools made. The drive shows up in the BIOS, however after I restarted his machine again it sits on the "Entering setup....." screen at the load window. The only thing I can think of is that may have messed with stuff is I used this tutorial to create a bootable XP install on a USB drive to install XP on my machine (I am 99% certain that the optical drive in my PC is broken) and maybe it used the other hard drive's letter for the USB drive for some reason, which doesn't make much sense since it was recognized it as a different drive letter before I started the process. It is possible that it used the secondary hard drive's letter for it's work, but once again I am uncertain. Where should I go from here? He his bound to wake up within the next several hours and will probably flip a lid if I cannot get some sort of handle on this. Any and all help is greatly appreciated. PS: Anyone who helps me get this situated has a beer or two on me, as long as you are in the greater metro Detroit area, or don't mind traveling a bit!

  Read the article

• Two different subwoofers aren't working on my machine or my phone

  - by Philluminati

  I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

  Read the article

• Weirdly high ping on direct ethernet connection?

  - by Antriel

  I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

  Read the article

• Getting 0xc00000e windows 7 "Boot device inaccessible" after random crashes

  - by Dynde

  I've been having some weird random crashes that I can't seem to locate, and I'm unsure if it's windows or hardware related. It's a brand new computer and very powerful. I've run into a couple of these random crashes, now I don't know what causes them, as it happens during the night, when I'm sleeping. When I wake up, all I see is a boot manager screen that says Exception: 0xc00000e "Boot device inaccessible". A simple restart doesn't fix the problem - it seems to struggle locating my primary hdd - but a complete shutdown works, it'll just fly straight into windows again. The event viewer doesn't tell me much. The most reason incident just gives me this: "The previous system shutdown at 08:55:44 on ?11-?12-?2011 was unexpected." And also a kernel power event: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. and I can see only two application event entries around that time at 8.47 (about 8 minutes prior to the crash): The Windows Modules Installer service entered the running state. The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. Can anyone tell me anything about this, or direct me to a forum or something that might know what's wrong? I can supply the extra details of the events too if needed. The hdd is an SSD - could that have anything to do with it? I ran a few diagnostics and memory and hdd should be okay - at least the diagnostics report is clean. Is it a faulty drive?

  Read the article

• Setting up virtualbox for outside access

  - by Morgan Green

  I have a computer running a server that my subdomain on my shared hosting account points to. IE subdomain.mydomain.org goes to my home server. Now then; what I'm wanting to do is be able to access my VirtualBox servers through that subdomain and a different port. E.G Ubuntu Virtual Box Server 1 Username:Ubuntuhost1 Password:MyUbuntuHost1 Port:4000 Internal IP: 192.168.1.60 External IP: 24.29.138.45 Ubuntu Virtual Box Server 2 Username:UbuntuHost2 Password:MyUbuntuHost2 Port:4001 Internal IP: 192.168.1.61 External IP: 24.29.138.45 Now I want to be able to access RDP number 1 through Port 4000, but if I access Port 4001 it will connect to the server on port 4001; both using the same subdomain. The next issue is the fact that even though I know what the IP addresses are on the router for the virtualbox hosts through ifconfig it doesn't change the fact that they don't show up on the router. If anyone knows how to configure this to work please help me out because I've been racking my brain to the highest extent I can. Alright; here's an edit to clarify more; Sorry. My ports on the router are edited to forward Port 4000 on Internal IP 192.168.1.63 (My Ubuntu Internal IP address) Now when I go to my Router Home Page my VirtualBox Internal IP Address doesn't show on the attached device listings, so I set up port forwarding anyways to the VirtualBox Internal IP. My end goal is when I connect to mydomain.org and I connect through port 3389 it takes me to my host computers server, but if I put in mydomain.org and go through port 4000 it's going to redirect to my VirtualBox server; Is this even possible? Sorry; I'm trying to clarify the most I think I can I just don't know how else to explain my issue.

  Read the article

• server 2008 r2 stuck on installing updates

  - by volody

  I have 2008 r2 64bit server that is stuck on installing updates. It shows message "Please do not power off or unplug your machine. Installing 57 of 61.." This message is shown for 3 hours now. I was trying to connect to this server using mmc. runas /user:AdministratorAccountName@ComputerName "mmc %windir%\system32\compmgmt.msc" RUNAS ERROR: Unable to run - mmc C:\Windows\system32\compmgmt.msc 1311: There are currently no logon servers available to service the logon request. What else can I do? Update: Remote Desktop does not work. It just disappear after entering username and password from Win7-64 computer Update: I have disconected server. Now Server Manager in Roles Summary shows message "Unexpected error refreshing Server Manager: The remote procedure call failed." Event log shows Could not discover the state of the system. An unexpected exception was found: System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Windows.ServerManager.ComponentInstaller.ThrowHResult(Int32 hr) at Microsoft.Windows.ServerManager.ComponentInstaller.CreateSessionAndPackage(IntPtr& session, IntPtr& package) at Microsoft.Windows.ServerManager.ComponentInstaller.InitializeUpdateInfo() at Microsoft.Windows.ServerManager.ComponentInstaller.Initialize() at Microsoft.Windows.ServerManager.Common.Provider.RefreshDiscovery() at Microsoft.Windows.ServerManager.LocalResult.PerformDiscovery() at Microsoft.Windows.ServerManager.ServerManagerModel.CreateLocalResult(RefreshType refreshType) at Microsoft.Windows.ServerManager.ServerManagerModel.InternalRefreshModelResult(Object state) Update: Manual update hangs on (Installing update 58 of 62...) Seurity Update for Windows Server 2008 R2 x64 Edition (KB979309) Update: It could be an issue with that admin user was renamed

  Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >