Search Results

Search found 17406 results on 697 pages for 'option explicit'.

Page 579/697 | < Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >

• Windows 7 Icons, Buttons, and Tabs corrupted...Professional 32-bit

  - by xhyperx

  The other day, about two or three ago, I was simply typing in a Microsoft Word document when my screen froze. After a few moments, it went black...I thought it was my vid hardware (dual nVidia 9800 GTs). Anyway, I did a hard reboot, and chose to Start Normally. The system blue screened telling me there was a failure in the Memory Manager. So then I thought maybe a RAM failure or vid memory failure. I attempted reboot again, this time I got presented with the option to repair windows...so I went with that. The repair app finished and did an auto reboot. This time I got all the way back to my desktop where in a matter of a about 30 seconds, the system blue screened again and pointed to the Memory Manager as the area of cause. Again I rebooted, the repair thingy came up again and I allowed it to do its thing. Deciding if the same failure occured I'd begin pulling hardware to see at what point I may have found the possibly defective party. However, this time it rebooted, I got back to desktop and no crash. All looked well, untill I looked at the baloon messages when hovering over the System Bar icons. Also when I opened any of my browsers, the tabs had no text, and any window that pops up that has regular buttons (OK, Cancel, etc., etc.) looks weird. The buttons are really really long and have no text. So it seems like the system is once again running smoothly, however something has gotten corrupted.. something relating to drawing basic windows user interface objects. Help...all ideas are respected and appreciated. Have a great day everyone!

  Read the article

• Renaming VLAN Interfaces in Linux

  - by rhololkeolke

  I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

  Read the article

• Huge discrepancy in Inkscape file size

  - by Keyran

  When using Inkscape to create many pictures with common elements across them, I tend to copy the first SVG file I have created as many times as I need pictures, and then edit the copies. If I reuse files across projects, it can result in a file being copied and modified tens to hundreds of files. I have recently realized that the latest copies have a size between 29 and 60 MB, slowing my computer down significatively. My pictures are very simple, nothing that would normally go over 1 MB in size. As an experiment, I copied the entire content of one of the latest files into a new Inkscape file. I am certain that I have copied the content of the file entirely (I have only one layer and I used the "Select All" option). The new file has a size of 102,2 KB. This would indicate that about 30 MB of data per file is irrelevant to me. What could be the cause of this size difference ? Is there a way to reduce the size of a file without having to copy the content into a new file ? I am using Inkscape 0.48.4 on Debian Unstable. Thanks for any input you might be able to provide !

  Read the article

• p410i Mirror failed couldnt find same disk

  - by Heishiro Mitsurugi

  I have an HP server with an P410i RAID Card installed. I had two SATA Drives connected (250GB each). The RAID was configured as a Mirror. A few days ago the drive one (1) failed, and i had to remove it. Tried to find the same part number here in Venezuela, but i couldn't. So, i bought a 500GB SATA Drive, and connected it to the same bay where the 250GB failed drive was. When the server booted, it asked me if i wanted to rebuild the data. I selected the option for that, and Windows Server restarted properly. When i got into the ACU (Array Configuration Utility) it told me that it was rebuilding the data. Today the warning went away, and according to the ACU everything is just fine. My question is... What i did was right? Can i create a mirror from a 250GB disk in a 500GB disk using the p410i? I have done that before, but only using software RAID in Windows, and it just uses the space it needs. As a matter of fact, when did that using Windows i was able to use the remaining space in the bigger drive, but in the p410i i can't use it. Should i be worried? Thanks a lot in advance for any pointers or info that you could give on this. Heishiro

  Read the article

• Where can I legally obtain the 64bit version of Windows 8?

  - by Harsha K

  No, I am not looking to pirate. I bought a key through the Upgrade assistant (for just $15 due to the upgrade offer), but it downloaded an iso file that was between 2.3 and 2.5 GB. Which doesn't make sense to me, because the Evaluation version of Windows 8 x64 is closer to 3.4 GB in size. I assumed the Upgrade Assistant would be intelligent enough to realize that it is being run on a Windows 7 x64 machine and by extension, download the x64 code. Previously, I was able to legally download the ISOs (sans the keys, of course) from the Digital River host. I do not see an option to do that. I'm not interested in risking downloading a tampered ISO. I want to do it through Microsoft channels, but I just don't see how. As you may imagine, search terms such as "Windows 8 official download link" result in a plethora of obviously spyware infested piracy sites. If there's any non-exposing way for me to prove that I have legally purchased Windows and I'm genuinely looking for this answer, please let me know. For reference to what I am looking for it is similar to the answer given in this question for Windows 7: Where do I download Windows 7 (legally from Microsoft)?

  Read the article

• Duplicate monitor on highest resolution in Windows 7

  - by AlexanderMP

  I have a monitor with a native resolution of 2560x1440, connected through display port. I also have an AV Receiver connected to the video card via HDMI, to have surround sound in games. All using Radeon HD 5670 (will upgrade soon to HD 7850). The problem is that my computer detects the receiver as a separate monitor, with the highest available resolution of 1920x1080. I have 3 options: Disconnect the second display. But then the sound (digital audio output through video card) also disappears. Duplicate displays. But then my primary monitor resolution is reduced to a maximum of just 1920x1080, that being the maximum of the second monitor. Extend desktop. This is the solution I picked so far, it being the least evil. The problems I face in this situations are 2: I have a blank part of the desktop where I sometimes lose my mouse pointer, so I made the extension small, 640x480, and placed it in a corner; when I turn off the main display, all windows resize to 640x480. In Kubuntu I had the option to duplicate the displays, while keeping the higher resolution. Which was great. I tried overriding using the Win7 netbook hack, but it's not available on non-netbooks. Is there a similar solution for this problem in Windows 7?

  Read the article

• Concatenating gziped Apache logs

  - by markdrayton

  We rotate and compress our Apache logs each day but it's become apparent that this isn't frequently enough. An uncompressed log is about 6G, which is getting close to filling our log partition (yep, we'll make it bigger in the future!) as well as taking a lot of time and CPU to compress each day. We have to produce a gziped log for each day for our stats processing. Obviously we could move our logs to a partition with more space but I also want to spread the compression overhead throughout the day. Using Apache's rotatelogs we can rotate and compress the log more often -- hourly, say -- but how can I concatenate all the hourly compressed logs into a running compressed log for the day, without decompressing the previous logs? I don't want to uncompress 24 hours' worth of data and recompress it because that has all the disadvantages of our current solution. Gzip doesn't seem to offer any append or concatenate option but perhaps I've missed something obvious. This question suggests straight shell concatenation "works" in that the archive can be decompressed but that gzip -l doesn't work seems a bit dodgy. Alternatively, perhaps this is still a bad way to do things. Other suggestions are welcome -- our only constraints are our relatively small log partitions and the need to provide a daily compressed log.

  Read the article

• What is the best time to set the IP address for a server headed to a server colocation facility?

  - by jim_m_somewhere

  What is the best time to set the IP address for a server? I have a server that I am going to install the OS on and then I am going to send it to a server colocation facility. The server is going to have Internet facing services (www, email, etc.) I can set up a "fake" IP address during install (by fake I mean private as in RFC 1918) and change the "fake" IPs to the real IPs once I set up the colocation service. The other option is to set up the colocation service...wait for them to give me the "real" IPs and use them during the OS install. The ramification are that...if I use "fake" IPs during install...I will have to wait before I set up things like SSL certs. If I wait for IPs from the colocation provider...then I can set up SSL certs that use the "correct" (as in "real") IP addresses...no changes to the certs until they expire. Do the "gotchas" of changing an IP address on a server outweigh the benefits of a quick install? The other danger with using "fake" IPs is that I could make a mistake when I go through the various files to change the IP address to the "live" IP address. Server OS: CentOS 6.2 or CentOS 6.3, 64 bit. Apps: Apache 2.4.X httpd, MySQL 5.X (will eventually use replication)

  Read the article

• Centos 5.5 install PearDB

  - by John Gardeniers

  Disclaimer: I use Linux for some jobs but I am not a Linux admin. I have a Centos 5.4 machine which performs some server duties and doubles as a web site development machine. PHP 5.3.3 was installed from RPM with the --without-pear option. I now wish to use PearDB but can't figure out how to install it. If I run yum install php-pear-db, it comes back with Error: Missing Dependency: php = 5.1.6-27.el5_5.3 is needed by package php-devel-5.1.6-27.el5_5.3.i386 (updates). The only RPM I've found that looks like it might be close currently has a dead link, so I can't even try that. What would be the best way to go about this? Is there a way to reinstall from the RPM and include pear? Can I install the dependency without breaking the current installation? Should I try to uninstall the original PHP and reinstall it from source, complete with pear? I thought this might have been an SU question but the FAQ over there suggests otherwise.

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

• How can I extend / create a new partition from the following setup?

  - by Kiada

  I'm a little unsure what to do in this situation. When I try to create a new simple volume from the unallocated space I get an error because I already have 4 partitions. I have no option to extend either my C:\ primary partition or the E:\ logical drive. C:\ - Gaming Win7 install. D:\ - Storage Unallocated Space - Would somehow like to install OSX on a partition from this space. E:\ - Software Development Win7 install. I:\ - Ignore this. It's an external 1TB HDD. Do I have any options that do not involve formatting / losing information on either C:\ or E:\? Thank you. Link to visual disk partitioning setup image. Edit: A bit more information regarding partitions. Firstly, the image linked above is a screenshot of Windows 7 partitioning tool, easier to read than text I guess! H:\ System Reserved: 100MB NTFS C:\ 244 GB NTFS Healthy (Page File, Primary Partition) D:\ 294 GB NTFS Healthy (Primary Partition) E:\ 100 GB NTFS Healthy (Boot, Page File, Crash Dump, Logical Drive) Unallocated 292 GB Hope this helps :)

  Read the article

• Downloading Emails locally with Thunderbird

  - by r_honey

  I am using Gmail (web interface) for sometime now, and have well over 20 labels and some thousand mails there archived to different labels in Gmail. Now I want to have a local copy of all my mails and following points are important in the context: The Primary mail access mechanism would continue to be Gmail web for me. I just want a backup of my mail account locally. Ideally the mails should download locally in folders named after Gmail labels (I know this is possible via IMAP but probably not by POP) After all my mails are available locally, I will delete most of them in Gmail to free up space and because I want to archive them. The mails should continue to exist locally and should not be deleted when I delete when from Gmail web interface. I would be syncing my gmail account locally let's say every month. So, the new mails that I have sent/received during this period should come over to my local mailbox in the folders named after Gmail labels. I do understand that Gmail maintains a single copy of email having 2 different labels and such email would get duplicated locally in the 2 folders and I am okay with that. Essentially you can see I just want to archive my mails from the Gmail server to a local backup and then sync (one way from Gmail to locally) new mails at regular intervals. For some points above, POP seems to be the option while IMAP seems for the others. I am really confused and need help in deciding which of POP or IMAP would suit me best. I have currently chosen Thunderbird to be my local email client but would not have a problem switching to Outlook or anything else as long as I get my desired archiving functionality.

  Read the article

• Windows 7 just deleted 4 days of work

  - by Mat

  Hey! I'm just a bit about to freak out. I just finished a project and rebooted my computer. It didn't want to boot anymore so I had to use the Windows 7 system repair option. It ran for a minute and then booted up. Now most of my source code from the last 4 days of work is gone! Background: sometimes (most often after installing new software) my notebook won't boot up anymore. It will just show the little Windows 7 flag, but not read from the hard disk anymore. If I hard-abort and reboot then, it asks me whether to start Windows normally (which won't work) or to run "Windows startup repair". If I run it, it does some stuff for about two or three minutes and then I can boot Windows again. Usually after this, .exe files I added to the computer during previous days are gone - but other files so far were not touched. But now, after this happened, a whole bunch of ".as" (ActionScript source files) from my project are gone! Does anyone know where and whether there's a way to recover them?

  Read the article

• Cannot browse Visual SVN Repositories

  - by user1783560

  I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

  Read the article

• Trouble Starting MySL Community Server on Windows 7

  - by CodeAngel

  I have installed Netbeans 7 on my Windows 7. In addition, the MySQL Community Server 5.6.12 is installed with the MSI installer on thesame 7 PC. The MySQL server is integrated with the Netbeans IDE. However , it is not possible to start or stop the MySQL server from the command prompt or the Netbeans IDE. I am only able to start or stop the server from the Windows 7 services tool. Also , it is difficult running SQL queries from the Netbeans IDE even though it shows there is connection with the MySQL server. I have added the my.ini file to the installed directory of the MySQL server , that is : C:\Program Files\MySQL\MySQL Server 5.6 below is the my.ini file : # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... port = 3306 # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Any suggestion is welcomed.

  Read the article

• Display on secondary video card (Nvidia 8400 GS): horrible refresh, bogs system

  - by minameismud

  This is my work computer, but it's a small shop. We do business software development. The most hardcore thing we create is some web animations with html5 and fancy javascript/css. The base machine is a Dell Precision T3500 - Xeon W3550 (3.07GHz quad), 6GB ram, pair of 500GB harddrives, and Win 7 x64 Enterprise SP1. My primary video card is an ATI FirePro V4800 1GB in a PCIe slot of some speed driving a pair of 23s at 1920x1080 through DisplayPort-HDMI adapters. The secondary card is an NVidia GeForce 8400GS in a PCI slot driving a single 17" at 1280x1024 through DVI. On either of the 23" monitors, windows move smoothly, scroll quickly, and are generally very responsive. On the 17", it's slow, chunky, and when I'm trying to scroll a ton of content, Windows will occasionally suggest I drop to the Windows Basic theme. I've updated drivers for both cards, and I've gotten every Windows update relating to video. Specifically: ATI FirePro Provider: Advanced Micro Devices, Inc Date: 6/22/2014 Version: 13.352.1014.0 NVidia 8400 GS Provider: NVIDIA Date: 7/2/2014 Version: 9.18.13.4052 Unfortunately, new hardware isn't really an option. Is there anything I can do software-wise to speed up the NVidia-driven monitor?

  Read the article

• What is the alternative of Apache's global Alias in IIS? (e.g. Alias /phpMyAdmin "c:/AppServ/www/phpMyAdmin")

  - by Sk8erPeter

  I know there's an "Add Virtual Directory..." option in every given sites in IIS with which I can set up e.g. phpMyAdmin's path to be reached with prepending /phpmyadmin to the address (e.g. http://example.com/phpmyadmin), but isn't there a "global" setting similar to Apache's Alias? For example, in Apache this setting looks like this: <IfModule mod_alias.c> Alias /phpMyAdmin "c:/AppServ/www/phpMyAdmin" Alias /phpmyadmin "c:/AppServ/www/phpMyAdmin" </IfModule> This way I reach phpmyadmin with every hosts. (http://example1.com/phpmyadmin, http://example2.com/phpmyadmin also does work) But in IIS, do I have to add a virtual directory to every sites? I'm just curious, because we would like to serve some domain's content, so there would be multiple sites. It would be more comfortable to do it once (or have the opportunity to remove it once), but if I have to, I do add a virtual directory for each sites. (I know, maybe it's the better solution, because I can have a site where I don't want phpmyadmin to be available, but I was just curious.) Thanks in advance!

  Read the article

• Where is SQLite on Nokia N810? How to get?

  - by klausnrooster

  I need SQLite3 with the TCL interface for a simple command-line app I use on all my PCs and want to use on my new (to me) Nokia N810. But "find" does not find any SQLite on the Nokia N810. Several apps use it, supposedly, like the maps/gps (poi.db), and others. I got sudo gainroot before using find, tried with wildcards * and dot . No luck. I guess it's embedded in the apps that use it? The N810's app manager doesn't offer SQLite. Apt-get has it and then fails with error: "Unable to fetch some archives, ..." The "update" and "--fix-missing" options do not help. I don't really want to get scratchbox and compile SQLite and TCL extension for it from sources. I looked at README and it seems like it might be straightforward. However [1] it's not clear what scratchbox download I would need (there are dozens in the Index of /download/files/sbox-releases/hathor/deb/i386), [2] I've never compiled any C sources successfully before, [3] and the whole mess entails a lot of learning curve for what is a very small one-off personal project. http://www.gronmayer.com/ has a few (sqlite (v. 2.8.17-4), libsqlite0 (v. 2.8.17-4), and libsqlite0-dev (v. 2.8.17-4)) but they appear to part of some huge package, may or may not include the TCL interface, ... and no I don't want to port my tiny app to Python. Is there some option I've overlooked? Must I get scratchbox and compile for ARM myself? Thanks for your time.

  Read the article

• SATA disks boot order?

  - by kire

  I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

  Read the article

• I just deleted my backup file! How do I save it?

  - by Sammy

  I just accidentally deleted a backup file that I need to restore my system. It's an Acronis True Image TIB file. It was stored at H:\My backups and the name of the file was File_backup_2012-10-18.tib. I did a quick scan with Recuva 1.43.623 and it found the file using the recovery wizard, but it was unable to recover it. The "state" of the file is "unrecoverable". So the resulting file is 0 byte. I am trying to do a deep scan with Recuva right now but it takes a lot of time. If it should fail, what other recovery option do I have? Is there any other good file recovery software that's free to use for home users? I do have a second copy of the whole system partition, but I needed this file backup copy because it is more up to date. That's the file, right there! But why is Recuva unable to recover it?

  Read the article

• MacMini transmit rate stuck at 11, every other device can connect at full 54Mbit/s?

  - by chum of chance

  I have a MacMini circa 2007 that's getting very low transmit rates via wifi, 8-11. I have other devices that are getting full 54, including a MacBook Air. With everything else off, the MacMini doesn't want to seem to go any faster. Since it has been previously connected to ethernet its entire life, I was wondering if there were some settings I can change to speed up the connection. Option-clicking the network icon gives this read out: PHY Mode: 802.11g Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -73 Transmit Rate: 11 My new MacBook Air has the following readout: PHY Mode: 802.11n Channel: 1 (2.4 Ghz) Security: WPA2 Personal RSSI: -66 Transmit Rate: 79 Both have full bars and the wireless router is in the same room to eliminate any obstructions from the equation. Could the MacMini be connecting at an older protocol, like 802.11b and be reporting erroneously that it is connected at 802.11g? This would explain why I haven't seen a transmit rate above 11. Any further trouble shooting I can try before buying a new USB 802.11n device? The WiFi router is a DLink DIR-615. I can see other devices, and none, even the other g connected devices, are getting below 30-40 MBit/s. What's going on here?

  Read the article

• Running two graphics cards (non-SLI) to power 3D on two different monitors?

  - by Delameko

  Hi, I'm a bit clueless about this, so excuse my naivety. I have two video cards, a Nvidia 8800 and a GT120, powering three monitors. I run two 3D game instances (two Everquest 2 clients), one on each of my first two monitors. It's been running fine, although sometimes it sounds like the computer is trying to take off. Today I realised that I was actually playing them on the two monitors that are both powered by the 8800. Thinking that I might as well make use of the power of both cards I tried switching the monitor cables over so that each card would be "powering" one of the clients. (Is it silly to assume this is how it works?) This doesn't seem to have had the desired effect, as the client running on the 8800 screen is running worse than it was before. Is it even possible to run two clients on separate GPUs? Is SLI the only way to utilise 2 GPUs? Is there something special I have to do? Or do I have to set the client to use a particular GPU (an option I can't seem to find in EQ2)? I run the clients in window mode if that makes any difference, and I'm running Win 7. Thanks.

  Read the article

• Restore only one partition of Windows Backup

  - by VitoShadow

  I have a MacBook Pro with an HD partitioned. This HD was divided in two partitions: the first was about 650 GB, with OS X installed, and the second one (created with BootCamp Assistant) was about 100 GB, with Windows 7 installed. I needed more space for Windows, so I decided to backup the Windows partition using the Windows backup tool, from Control Panel. I created an image of my partition, stored it in an external HD, and now I'm trying to use it. In order to give more space to Windows, I formatted the HD, and recreate a new partition table, with the first partition of about 250 GB (with OS X) and the second of the exactly size of the previous partition in which was installed Windows (about 100 GB); thre rest was empty space. In the second, I tried to restore the Windows backup. I plugged in the Windows Installation CD (with the HD with the backup connected to the computer), and select the option "Repair your computer". Then, I choose the image of the backup (automatically recognized), and I try to restore it. The problem is that now the System Recovery Tool wants to format all the HD, in order to install only Windows! In this way, I should lose everything, also the MacOS partition! Is there a way to install the backup only in the Windows partition?

  Read the article

• Allocating More Than 4 GB Of Memory

  - by TPatti

  I am facing an issue with memory allocation. I have: Host OS: Microsoft Windows XP - Professional x64 Edition - Version 2003 - Service Pack 2. Host Physical Memory: 8 GB Guest OS: Red Hat Enterprise Linux WS release 4 (Nahant Update 5). I am not sure if it is 32 or 64 bits. The lsb_release -a command says that argument LSB Version: core-3.0-ia32, so I guess that would be 32 bits... VMware Player Version: 2.5.2 build-156735 I would like that VMware Player could allocate more that 4 GB, but when I go to the setting, it only lists 4 GB. If I choose the "About" option, it actually says that I have 8 GB installed in the host machine. This VMware image created by someone else and provided to me, apparently done with VMware Workstation 5. Why can't I allocate 8 GB? Where is the problem? In the WMware Player Version, Guest OS or Host OS? How can I solve this? I understand that for this version of player there isn't one version for 32 and another for 64 bits.

  Read the article

• Is it possible (and how if it is) dump two concatenaded disks in a new disk using DD?

  - by pedromarce

  Hi, I have a Lacie enclosure that has a setup with 2 500gb disks configured as 1 drive of 1TB, the only partition created for the whole drive is HFS+ journaled, but the controller in the enclosure is gone and so the drive refuses to mount anymore. I have been able to remove those two disks from the enclosure and connect them using USB ports and a program called R-studio (Raid recovery program) check that the setup the controller in the enclosure was using was both disks concatenated (Not Striped). And so configuring that option in R-studio I could be able to get back all the information. But before I got a license for r-studio for just one use, I would rather buying a new 1TB disk and try to write all the information of those two disks in this new one. I can use Mac or linux machines to do it, and I think it should be ok use DD command in linux to concatenate those two drives into the new one in the right order to get it working again in the new disk and I will reformat the old ones, but I am not sure. So, is it possible in this scenario to write both disks into a new one using DD? Any hints how the command would look? Thanks,

  Read the article

< Previous Page | 575 576 577 578 579 580 581 582 583 584 585 586  | Next Page >