Search Results

Search found 16640 results on 666 pages for 'computer tower'.

Page 582/666 | < Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >

• Wireless card on HP laptop not working

  - by D. Strout

  I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

  Read the article

• "Security Warning" comes up when I run via another program

  - by Alexander Bird

  If I execute vmmap from the command line it works fine. However, if I call some other program and pass vmmap as a paramater for this other program to start the execution, then I get this "security error" popup -- which makes it hard to automate scripts. In other words, I want to wrap vmmap via another program. In my case, I want to wrap vmmap via another program because whenever vmmap runs, it will bring a window up momentarily and then disappear. So I try passing vmmap as an argument to another program which will start the program "headlessly". I tried this program and this program, and in both cases I get the same popup which defeats the purpose of automation. Why does this happen when the program isn't run directly? Does anyone know the internals of what this warning is? And, utlimately, is there a way to stop this from happening, but only for this instance? I don't want to disable this warning-system on my whole computer. EDIT: I am using Windows Server 2003, and I don't necessarily need solutions for other platforms, but I would like to know what they are if they are platform-dependent solutions.

  Read the article

• Can I get a domain controller not to act as DNS for the members?

  - by rsw

  Hi, Let me try to explain my current setup. I have one linux machine acting as DHCP and DNS (dhcpd3 and bind) in my network. This works fine, all computers I hook up to the network gets an IP address and proper DNS servers set. Let's call it 10.12.0.10 However, we also have a Windows Server 2003 Domain Controller in our network to which we add our Windows computers (running XP), let's call it 10.12.0.20. I noticed that when I run 'nslookup' on one of the windows machines, it says that the primary DNS is 10.12.0.20. This have not been much of a problem since: The Windows clients are stationary The Windows server in itself point out my real DHCP/DNS, since I can reach everything specified in it However, this turns out to be a problem when we use Laptops. They connect to the domain here and gets a DNS server, but when the user travels or connect the computer from home, we hit a problem. They are connected to their internet, but their DNS is 10.12.0.20 which they can't reach since they're at home and not at the office network. I solved this by removing the register key called "NameServer" with the value 10.12.0.20, but it gets set again whenever they logon to the domain the next time (when they get back to the office). Can I somehow make the computers take whatever DNS server they are handed when connecting to the internet or a home network, instead of always trying to reach the Domain Controller?

  Read the article

• Intranet Setup for Small business any resources?

  - by Rogue

  Want to setup an intranet for a small business setup. Current Setup 28 computers running Windows ( few older pc's run Windows Xp but most run Windows 7) Spare Dell Pentium 3 which can run as a server. 6 switches spare NIC's and lots of lan cable available for networking. 3 Independent Internet connections Currently we have 3 independent networks which share internet connections, each network uses a different internet connection. Current network is setup solely to share the internet connection. What I need to achieve in this intranet Setup one common network. Instant file transfer via local network (maybe setup a file server?) Local text and voice messenger software Bridge the 3 internet connections and route all the internet connections from the main server Ability to allow or deny internet access to any computer on the network. Remote access from the main server to the client pc's on the network to debug software issues What operating system should I use on the main server? Do I need a hardware firewall? Any setup guides / resources or how-to's on how I can achieve the above requirements.

  Read the article

• Having trouble mapping Sharepoint document library as a Network Place

  - by Sdmfj

  I am using Office 365, Sharepoint Online 2013. Using Internet Explorer these are the steps I have taken: ticked the keep me signed in on the portal.microsoftonline.com page. It redirects me to Godaddy login page because Office 365 was purchased through them. I have added these sites to trusted sites (as well as every page in the process) and chose auto logon in Internet explorer. Once on the document library I open as explorer and copy the address as text. I go to My Computer and right click to add a network place and paste in the document library address. It successfully adds the library as a network place 30% of the time. I can do this same process 3 times in a row and it will fail the first 2 times and then succeeds. It works for a little while and then I get an error that the DNS cannot be found. I need multiple users in our organization to be able to access this document library as if it was a mapped network drive on our local network. Is there an easier way to do this? I may just sync using the One Drive app but thought that direct access to the files without worrying about users keeping their files synced.

  Read the article

• Missing BootMgr in Vista

  - by Selase

  Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

  Read the article

• Fix Video timelines

  - by Josh

  So, I have been going through and riping all of my DVD's and it seems that the way to get the highest quality out of these is to have DVD Shrink de-encrypt, rip, and decompress, the DVD's. After that I usually end up with a high quality (high size) set of .vob files in a classic DVD structure. Then I use a python script that I wrote to automate the process of finding the title sequence and then combining all of the title sequences' .vob files together into one file(similar to the "copy /b" command in windows), and then changing the extension to .mpg (a more widely supported format then .vob). This allows me to get a high quality rip in about 40 min. The problem comes in playing the files. I need all of the ripped dvd's to play on my media computer using windows media center but windows media center (and vlc for that matter) all think that the video files are anywhere from 5 min. to 0 min. which is not a problem (the video will still play all the way through) but if you want to pause it, when it is unpaused the video will start all the way over (Also fast forward and rewind don't work). I suspect that it is something wrong with the way the timeline is encoded in the video file, various forums on the internet recommended using virtualdub to fix the errors. But when I try to open the file virtual dub says that the file is not in mpeg-1 encoding and may be in mpeg-2. Is there any way to fix this? PS: I am aware that there was a similar question but it hasn't had any activity for 2 months and is dealing more with wmv files.

  Read the article

• IIS WebServer CreatesNew file: OwnerShip?

  - by Beaud.

  IIS is configured for Integrated Windows Authentication. web.config is configured as follows: <authentication mode="Windows" /> <identity impersonate="true" /> We are Load balancing between \webserver1 and \webserver2. Windows Server 2003 \\webserverX creates a XML file to \\share1 and access is denied. We got pass through access denial by allowing Everyon to access the share... We would like to have the impersonated user to be the owner of the created file. Instead, \\webserver1's computer account is the owner. How can we make sure that the impersonated user has ownership of the file at creation time? PROGRESSION: I decided to create the file locally on \\webserver1's root directory. File's ownership is NETWORK SERVICES even if impersonate="true". I'm unable to change ownership of the file in C# code. Why when creating a file, IIS won't use the impersonated user's write permissions? If it actually does, what I am doing wrong?

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• My Windows 7 has suddenly stopped displaying Unicode symbols

  - by Felix Dombek

  For some strange reason, my computer suddenly doesn't show certain unicode characters anymore! I have no idea what happened. Affected applications include Windows Explorer (should be Japanese characters), Google Chrome (should be a heart), and Winamp (should be stars): Russian, German etc. characters are displayed normally. Chrome also displays Japanese script on websites, but not in the GUI. How can I fix it? Update: I have tried to use System Restore to fix it. I needed to go back in time quite a while because the most recent restore points didn't solve it so I used one from the middle of November. After that restore, Unicode symbols were displayed again. Then I updated my system with Windows Update again because those were removed during the restore. After that, the error occurred again! I then did a restore to a point before my new updates, but the error persists, and the old restore point (which I used before) is gone and there are currently no other snapshots of the system. Any suggestions on what to do now? Update 2: I could find a workaround: Control Panel ? Region and Language ? Administration ? Change Language for Unicode-incompatible programs to Japanese (Japan). All mentioned programs display their symbols correctly again. However, I don't consider this a fix because these programs are not usually Unicode-incompatible, and it also leads to some (non-serious) artifacts in some programs. I still welcome an answer that tells me what went wrong here and how to fix the issue.

  Read the article

• How to install a desktop environment onto Ubuntu Server -- but without internet access or a CDROM?

  - by James

  I am playing around with a computer which has no CDROM drive or internet access and I have installed Ubuntu Server onto it. I have that all up and running nicely but now I'd like to install Xfce, GNOME or something similar so I can load up a desktop environment from the command line if I wish. Obviously with internet access or a CDROM, this would be a simple task of using apt-get and it finding & retrieving the packages for me, I assume, but I do not have either. I do however have a USB drive and I have used Unetbootin to make it into a bootable drive with the Ubuntu Server disk image files on there. I have mounted the USB drive to /media/usb0 and tried the command "sudo apt-cdrom add -d /media/usb0" to get apt to recognise the USb drive as an "Ubuntu CD" -- a source of package files but apt-get doesn't seem to be finding Xfce.. I try "sudo apt-get install xfce" and "sudo apt-get install xfce4" but neither find the package.. I would prefer to have Xfce but GNOME would be OK too.. My question is, am I doing something wrong? I figured that the Ubuntu Server disk (or rather, my Ubuntu Server USB drive) might not have any desktop environment packages on there so I tried the Xubuntu Desktop disk too (again, from my USB drive). I tried "sudo apt-get install xubuntu-desktop" but it couldn't find the package - even though it is listed under the /casper/ directory in some MANIFEST file. Anyone see where I'm going wrong? Maybe apt-get install is looking somewhere other than my USB drive? Maybe my commands are wrong? Maybe the disks don't even have the desktop environments on!? Thanks in advance guys, any input would be much appreciated. Cheers - James

  Read the article

• Is it possible to download extremely large files intelligently or in parts via SSH from Linux to Windows?

  - by Andrew

  I have a ~35 GB file on a remote Linux Ubuntu server. Locally, I am running Windows XP, so I am connecting to the remote Linux server using SSH (specifically, I am using a Windows program called SSH Secure Shell Client version 3.3.2). Although my broadband internet connection is quite good, my download of the large file often fails with a Connection Lost error message. I am not sure, but I think that it fails because perhaps my internet connection goes out for a second or two every several hours. Since the file is so large, downloading it may take 4.5 to 5 hours, and perhaps the internet connection goes out for a second or two during that long time. I think this because I have successfully downloaded files of this size using the same internet connection and the same SSH software on the same computer. In other words, sometimes I get lucky and the download finishes before the internet connection drops for a second. Is there any way that I can download the file in an intelligent way -- whereby the operating system or software "knows" where it left off and can resume from the last point if a break in the internet connection occurs? Perhaps it is possible to download the file in sections? Although I do not know if I can conveniently split my file into multiple files -- I think this would be very difficult, since the file is binary and is not human-readable. As it is now, if the entire ~35 GB file download doesn't finish before the break in the connection, then I have to start the download over and overwrite the ~5-20 GB chunk that was downloaded locally so far. Do you have any advice? Thanks.

  Read the article

• My processor is running slower than usually it has to run

  - by Soham

  I've Core2Duo E7400 2.80GHz processor on my Intel D945gcnl mobo. From CPU-Z, I've get to know that my processor speed is 1596MHz with X6 multiplier and 266MHz Bus Speed on each core. Why my processor is being operated at 1596 MHz rather than 2.80GHz...!!???? From my side I've tried to disable SpeedStep from my bios by setting EIST to 'Disable' and also tried to change Power Option to 'High Performance' in Windows 7. And also done like suggested in this question:http://superuser.com/questions/119176/processor-not-running-at-max-speed But it gains me nothing. I've also tried to run few massive applications together to check whether it was increasing at that time or not, but it remains same. Should I have to increase my multiplier or overclock to gain that lost speed...??? Should I have to check my power supply for any problem..??? or anything else...??? Please help me on this.... And yeah I've desktop computer so no problem causing by battery. Here's my CPU-Z Screenshot: http://i56.tinypic.com/2lk4mqc.jpg

  Read the article

• Solid State Drive Occasionally Freezes For A Minute While OS Is "Beach Balling"

  - by Boris_yo

  Almost a month ago I bought Intel 330 128GB solid state drive, migrated my data with Intel branded limited-feature Acronis from old HDD to new SSD, optimized with Intel Toolbox and started using it. Occassionally I get close to 1 minute freezes while seeing operating system "beach balls" and animations still work, I can interact and click on something but nothing responds, nothing loads. Recently a couple of such freezes occurred in shorter amount of time in a row. I have noticed that if I stop interacting with laptop, the freeze lasts less time than if I was interacting with laptop. But the bigger problem is when freeze just does not end and computer keeps being stuck unlil it is more than half hour and I run out of patience to keep waiting and feeling I need to restart the system because I am not getting anywhere. Such freeze happened while laptop was cold booting into Windows 7. This is when freeze hang occurred and I had to restart, only later to be greeted with Windows recovery screen stating something about faiure of boot sector and asking to insert Windows repair CD. But after I restarted, Windows booted successfully and all was well. I have filmed video of freeze hang occurring in cold boot which you can see here (on video page look below for description): http://www.youtube.com/watch?v=8b7MQlcDTUs As I have mentioned in the beginning, the SSD is less than a month old but here is S.M.A.R.T statistics just in case (TRIM is enabled btw according to CrystalDiskInfo): I want to emphasize that this SSD is the only drive I have, yet it is working in RAID mode (it was enabled initially in BIOS by previous laptop's owner) on Intel Rapid Storage drivers. I am contemplating about switching to AHCI mode but want to be sure this won't cause data loss. Additionally, the stock firmware is the only firmware available currently, yet Intel does not respond to my posts in their community board. If anyone here has this SSD model or generally has experience with SSD drives, I would love to know your thoughts.

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• Controller Error: Do I need to worry?

  - by Kryten

  I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

  Read the article

• What's the issue with this Samba setup?

  - by Dan Nestor

  I asked this on superuser, but I realized that may be the wrong place. I am duplicating the question here, I hope this is allowed. I am trying to share a directory through samba. In smb.conf I have the following: [global] workgroup = WORKGROUP security = user passdb backend = tdbsam netbios name = <hostname> [share_name] path = </path/to/share> writable = yes valid users = <username> <username>, the user in question, is the owner of directory /path/to/share. Permissions on the directory are 755. If I try to connect from another computer, the connection attempt is unsuccessful (I assume it's an authentication error, because it re-prompts me for the password). The client requires a domain name for authentication, I tried both WORKGROUP and the hostname/netbios name of the samba server. Samba logs on the server have no mention of the failed connection attempt. Firewall on the server is down. What am I doing wrong? Update: have since run smbpasswd -a <username> and now I am getting a clear error message, "not enough permissions to view contents of share".

  Read the article

• Copy UNC network path (not drive letter) for paths on mapped drives from Windows Explorer

  - by Ernest Mueller

  I frequently want to share network paths to files with other folks on my team via email or chat. We have a lot of mapped drives here, both ones we set up ourselves and ones set up by our IT overlords. What I'd like to be able to do is to copy the full real path (not the drive letter) from Windows Explorer to send to folks. Example: I have a file in my "Q:" drive, \cartman\users\emueller, I want to send a link to file foo.doc to everyone. When I copy the file path (shift+right click, "copy as path") it gets the file name "Q:\foo.doc". This is unhelpful to others, who would like to see \cartman\users\emueller\foo.doc, obviously. In Explorer it clearly knows it - in the address bar I see "Computer - emueller (\cartman\users) (Q:) -". Is there a way to say "hey man copy that path as text with the \cartman\users\emueller not the Q: in it?" I know I could just set up mapped network locations instead of the mapped drives for the ones that I set up personally and avoid this problem, but most of the mapped drives like the "users" share come from our IT policy. I could just make a separate network location and then ignore my Q: drive but that's inconvenient (and they do it so they can move accounts across servers). Sure my emailed path might eventually break because I'm losing the drive letter indirection but that's OK with me.

  Read the article

• Determine wifi capabilities of Windows box (with WSUS install rules)

  - by Hagen von Eitzen

  I need to determine if a computer is in fact a laptop with wifi capabilities (with emphasis on wifi rather than laptop). More precisely, I want to distribute a piece of software I wrote via WSUS and Local Update Publisher to those clients. To this end, I want to create appropriate "Package installable rules", that is simple rule used bay the Windows Update Service on the client to decide beforehand whether or not an update/installation package is applicable. Typically, such "installabel rules" are logical combinations of rules of type "File exists", "Registry Key exists", "WMI Query", "MSI Product Installed", so I'd prefer one of those methods. The method I hope someone here can help me find should work with Win 7/Vista, preferably also with XP. My guess is that WMI query is the way to go, but I have little experience in that. I have found that one can e.g. query for EnclosureType and that might detect a laptop. However, I would be much happier if an actually available wifi interface would be detected. Does anyone have an idea how to approach this? If there is anything you need me to clarify, don't hesitate to comment.

  Read the article

• Hardware chose: ASUS Eee Pad Slider or ASUS Eee Pad Transformer for web development?

  - by JamesM

  I was just wondering out of the following Tablets which one seams better to get? I am a web-developer, Always using Unix/Linux/BSD, I want a tablet that has a keyboard. http://gdgt.com/asus/eee/pad/slider/ http://gdgt.com/asus/eee/pad/transformer/ http://www.tweaktown.com/news/18311/asus_eee_pad_slider_transformer_tablets_with_physical_keyboard/index.html I know both are similar, but not sure what one I should get. The Slider seems very nice but again the keyboard is fixed to the tablet unlike the Transformer. P.S: I'm going to use one of the above to showcase my programming work at school, as well as just being used as a cheaper notebook than the $300 Windows.7 locked down notebooks. By Locked down, I mean we pay $300 for them and after 3 years we can do what ever to them, they are Lenovo thinkpad mini-10 and What they have installed is all you get, they don't let us install what ever OS on them. And with the question on both of those links, I think that the transformer would be better but that is only taking in the fact of it being both a tablet and a notebook. What I really care about is power; which one is more powerful? It will be running kFreeBSD-Debian-Squeeze with Linux-Mint theme with several other packages. Though I'm not going to run Windows (which I feel is bloated), I still want power. To help keep my computer from slowing down with cache, I will have a cron.d/hourly script cleaning out the cache memory.

  Read the article

• adding a custom user folder on Ubuntu

  - by Narcolapser

  Question: How do you add a custom folder to the collection of user folders that come with Ubuntu? Info: I just loaded my netbook with Ubuntu Desktop 10.04LTS (Desktop because it is an aspire one and the Apocalypse seems to follow when ever i try to install netbook remix onto it). It comes with standard folders like Documents, Music, Pictures, Downloads(though this one doesn't appear until you actually download something), Videos, etc etc. These are handly little folders because they have little symbols on them and are nicely located in my file browser. it is basically like the folder lay out the windows had in vista. I do a lot of little programing on this computer so i have a folder in which i keep all these single kb code files. Obviously named "Code" that I keep in my home folder. But I would really like to it over listed next to my other user folders. In summary, how do you add a folder to the listing on the file browser. And, if possible, how do you give it an icon? (I understand fully that I will probably have to make said Icon) those two things are what I'm seeking to do. ~n P.s. please correct me if I'm using the wrong name. I just guessed and called them "User Folders" because they were folders the user uses. made sense. but if they have another name like "libraries" please say so. Thanks

  Read the article

• SUSE Linux and Xen on Mac Pro - How best to prepare and configure?

  - by Andrew J. Brehm

  This is a longwinded question, so bear with me please. I have a 2009 Mac Pro with two CPUs and 8 GB of memory which is totally overpowered for Mac OS X. I am also in the process of slowly moving away from Mac OS X as my main platform. Since the Mac Pro is really new and nice I have finally decided to use it for another platform. I am familiar with Linux and SUSE Linux. Ultimately I want to run some version of SUSE Linux (recommend one, doesn't have to be free as in no money) and Xen. Here are the individual questions: Which version of SUSE Linux should I use and how do I install it on a Mac Pro? Note that the distribution must come with usable Xen. I am willing to pay. I assume Xen will work on my computer (it has VT support etc.). Is my assumption correct? I want to run Windows 7 and another instance of SUSE Linux under Xen. Is it possible to run Mac OS X Server under Xen (on a Mac Pro)? Which email client under Linux supports imap is is best-suited for integrating with MobileMe? Does SUSE Linux support the ATI Radeon HD 4870 and the Apple Cinema Display 1920 x 1200 resolution? What else should I take into account?

  Read the article

• FreeBSD's ng_nat stopping pass the packets periodically

  - by Korjavin Ivan

  I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

  Read the article

• Microsoft Mouse and Keyboard Center Needed for Keyboard but Doesn't Support Mouse

  - by eljay

  I recently built a new computer (running Win7 Pro 64-bit) that includes the Microsoft Sidewinder X4 Keyboard. To make use of all the extra features of this keyboard I need the Mouse and Keyboard Center. I just ran Windows Update for the first time on this system and the Mouse and Keyboard Center was included in the update. I'm left-handed and before the update I had the mouse set up for lefty use. Now after the update, it's been set to righty use and the original mouse control panel applet no longer allows the assignment of buttons. For that there's a link to the Mouse and Keyboard Center which does not support my oldish mice. (I have an IntelliMouse Optical and a Creative Mouse Lite Pro.) So I need the new utility for my keyboard, but I have to be right-handed to use my mouse? Really! I tried changing HKCU\Control Panel\Mouse\SwapMouseButtons to 1, but a reboot set it back to 0. Is there some way I can change my mouse back to left-handed? Thanx -eljay

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

< Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >