Search Results

Search found 20388 results on 816 pages for 'nvidia current'.

Page 582/816 | < Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >

  • GLSL per pixel lighting with custom light type

    - by Justin
    Ok, I am having a big problem here. I just got into GLSL yesterday, so the code will be terrible, I'm sure. Basically, I am attempting to make a light that can be passed into the fragment shader (for learning purposes). I have four input values: one for the position of the light, one for the color, one for the distance it can travel, and one for the intensity. I want to find the distance between the light and the fragment, then calculate the color from there. The code I have gives me a simply gorgeous ring of light that get's twisted and widened as the matrix is modified. I love the results, but it is not even close to what I am after. I want the light to be moved with all of the vertices, so it is always in the same place in relation to the objects. I can easily take it from there, but getting that to work seems to be impossible with my current structure. Can somebody give me a few pointers (pun not intended)? Vertex shader: attribute vec4 position; attribute vec4 color; attribute vec2 textureCoordinates; varying vec4 colorVarying; varying vec2 texturePosition; varying vec4 fposition; varying vec4 lightPosition; varying float lightDistance; varying float lightIntensity; varying vec4 lightColor; void main() { vec4 ECposition = gl_ModelViewMatrix * gl_Vertex; vec3 tnorm = normalize(vec3 (gl_NormalMatrix * gl_Normal)); fposition = ftransform(); gl_Position = fposition; gl_TexCoord[0] = gl_MultiTexCoord0; fposition = ECposition; lightPosition = vec4(0.0, 0.0, 5.0, 0.0) * gl_ModelViewMatrix * gl_Vertex; lightDistance = 5.0; lightIntensity = 1.0; lightColor = vec4(0.2, 0.2, 0.2, 1.0); } Fragment shader: varying vec4 colorVarying; varying vec2 texturePosition; varying vec4 fposition; varying vec4 lightPosition; varying float lightDistance; varying float lightIntensity; varying vec4 lightColor; uniform sampler2D texture; void main() { float l_distance = sqrt((gl_FragCoord.x * lightPosition.x) + (gl_FragCoord.y * lightPosition.y) + (gl_FragCoord.z * lightPosition.z)); float l_value = lightIntensity / (l_distance / lightDistance); vec4 l_color = vec4(l_value * lightColor.r, l_value * lightColor.g, l_value * lightColor.b, l_value * lightColor.a); vec4 color; color = texture2D(texture, gl_TexCoord[0].st); gl_FragColor = l_color * color; //gl_FragColor = fposition; }

    Read the article

  • Help with calculation to steer ship in 3d space

    - by Aaron Anodide
    I'm a beginner using XNA to try and make a 3D Asteroids game. I'm really close to having my space ship drive around as if it had thrusters for pitch and yaw. The problem is I can't quite figure out how to translate the rotations, for instance, when I pitch forward 45 degrees and then start to turn - in this case there should be rotation being applied to all three directions to get the "diagonal yaw" - right? I thought I had it right with the calculations below, but they cause a partly pitched forward ship to wobble instead of turn.... :( Here's current (almost working) calculations for the Rotation acceleration: float accel = .75f; // Thrust +Y / Forward if (currentKeyboardState.IsKeyDown(Keys.I)) { this.ship.AccelerationY += (float)Math.Cos(this.ship.RotationZ) * accel; this.ship.AccelerationX += (float)Math.Sin(this.ship.RotationZ) * -accel; this.ship.AccelerationZ += (float)Math.Sin(this.ship.RotationX) * accel; } // Rotation +Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.J)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * accel; } // Rotation -Z / Yaw if (currentKeyboardState.IsKeyDown(Keys.K)) { this.ship.RotationAccelerationZ += (float)Math.Cos(this.ship.RotationX) * -accel; this.ship.RotationAccelerationY += (float)Math.Sin(this.ship.RotationX) * -accel; this.ship.RotationAccelerationX += (float)Math.Sin(this.ship.RotationY) * -accel; } // Rotation +X / Pitch if (currentKeyboardState.IsKeyDown(Keys.F)) { this.ship.RotationAccelerationX += accel; } // Rotation -X / Pitch if (currentKeyboardState.IsKeyDown(Keys.D)) { this.ship.RotationAccelerationX -= accel; } I'm combining that with drawing code that does a rotation to the model: public void Draw(Matrix world, Matrix view, Matrix projection, TimeSpan elsapsedTime) { float seconds = (float)elsapsedTime.TotalSeconds; // update velocity based on acceleration this.VelocityX += this.AccelerationX * seconds; this.VelocityY += this.AccelerationY * seconds; this.VelocityZ += this.AccelerationZ * seconds; // update position based on velocity this.PositionX += this.VelocityX * seconds; this.PositionY += this.VelocityY * seconds; this.PositionZ += this.VelocityZ * seconds; // update rotational velocity based on rotational acceleration this.RotationVelocityX += this.RotationAccelerationX * seconds; this.RotationVelocityY += this.RotationAccelerationY * seconds; this.RotationVelocityZ += this.RotationAccelerationZ * seconds; // update rotation based on rotational velocity this.RotationX += this.RotationVelocityX * seconds; this.RotationY += this.RotationVelocityY * seconds; this.RotationZ += this.RotationVelocityZ * seconds; Matrix translation = Matrix.CreateTranslation(PositionX, PositionY, PositionZ); Matrix rotation = Matrix.CreateRotationX(RotationX) * Matrix.CreateRotationY(RotationY) * Matrix.CreateRotationZ(RotationZ); model.Root.Transform = rotation * translation * world; model.CopyAbsoluteBoneTransformsTo(boneTransforms); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } }

    Read the article

  • What is the most appropriate testing method in this scenario?

    - by Daniel Bruce
    I'm writing some Objective-C apps (for OS X/iOS) and I'm currently implementing a service to be shared across them. The service is intended to be fairly self-contained. For the current functionality I'm envisioning there will be only one method that clients will call to do a fairly complicated series of steps both using private methods on the class, and passing data through a bunch of "data mangling classes" to arrive at an end result. The gist of the code is to fetch a log of changes, stored in a service-internal data store, that has occurred since a particular time, simplify the log to only include the last applicable change for each object, attach the serialized values for the affected objects and return this all to the client. My question then is, how do I unit-test this entry point method? Obviously, each class would have thorough unit tests to ensure that their functionality works as expected, but the entry point seems harder to "disconnect" from the rest of the world. I would rather not send in each of these internal classes IoC-style, because they're small and are only made classes to satisfy the single-responsibility principle. I see a couple possibilities: Create a "private" interface header for the tests with methods that call the internal classes and test each of these methods separately. Then, to test the entry point, make a partial mock of the service class with these private methods mocked out and just test that the methods are called with the right arguments. Write a series of fatter tests for the entry point without mocking out anything, testing the entire functionality in one go. This looks, to me, more like "integration testing" and seems brittle, but it does satisfy the "only test via the public interface" principle. Write a factory that returns these internal services and take that in the initializer, then write a factory that returns mocked versions of them to use in tests. This has the downside of making the construction of the service annoying, and leaks internal details to the client. Write a "private" initializer that take these services as extra parameters, use that to provide mocked services, and have the public initializer back-end to this one. This would ensure that the client code still sees the easy/pretty initializer and no internals are leaked. I'm sure there's more ways to solve this problem that I haven't thought of yet, but my question is: what's the most appropriate approach according to unit testing best practices? Especially considering I would prefer to write this test-first, meaning I should preferably only create these services as the code indicates a need for them.

    Read the article

  • Is there a factory pattern to prevent multiple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquely define what the object is (what node, what edge etc), and the others that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methods, so all these objects act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approach which accepts a Builder object and constructs the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquely defines the type of object (this is node A to node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows its state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overriding of serialization methods to make it work (ensure that when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in its place), as well as using a weakHashMap as if it was a weakHashSet to know whether an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to its own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state that is different than my memory; to tell my memory when its own state is inconsistent. I believe this is possible despite their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect that I'm posting).

    Read the article

  • Homepage issue on Google [closed]

    - by nico
    We have recently updated our website www.blinds4uk.co.uk with a new homepage containing additional features and more on page content but since then we have lost primary keyword positions and the home page has disappeared completely. The only time it appears is for an exact search ‘blinds4uk’. Today I took snippets of 'unique content' from the homepage and put this into the 'google search' but our homepage was nowhere to be found. When I did the same in ‘Yahoo’ the homepage came up. Are we missing something? We ranked in the top 4 for primary kw terms 'blinds uk' & 'uk blinds' but now we don’t show anywhere for these terms. Our homepage has never ranked well for the primary kw 'blinds' yet our internal pages rank very well with many pages on page 1 of google uk. We employed an SEO firm for 9 months to help us establish issues with the homepage but they never could, so we got rid. We have been trying to get to the root cause of why the homepage ranks so poorly for a number of years and only yesterday we established that we had the meta tag directly below the tag and our title & meta description were further down the page; we have today corrected. Not sure what effect this would have on the way Google reads the homepage but we are trying everything to try and get the homepage ranking fro those primary kw's. Our current developers & ex SEO guys are all part of the same company and cannot pin-point anything other than saying carryon with their SEO team because it will take time but just comes across as a milking exercise. Another thing which I have found very strange is the data from our 'traffic audience'. We are a UK based website yet our traffic stats were showing as;- UK 36.6%, Denmark 35.8% and India 27.6%. – don’t make sense to me! Is there anybody out there that could simply point us in the right direction to the problem(s), so we can fix once and for all? Could there be anything within the code that is causing the home page not to display within google for our primary kw's terms such as blinds, window blinds etc. I would appreciate any advice at all that may help us in our quest to sort this homepage issue once and for all

    Read the article

  • Quickly Copy Movie Files to Individually Named Folders

    - by DigitalGeekery
    Some HTPC media manager applications require movie files to be in stored in separate folders to properly store information such as cover art images and other metadata. Here we look at copying movie files to individual folders. If you already have a large movie collection stored in a single folder, we’ll show you how to quickly move those files into their own individually named folders. File2Folder FIle2folder is a handy portable app that automatically creates and moves movie files into a folder of the same filename. There is no installation needed. Simply download and run the .exe file (link below). Enter the current movie directory, or browse for the folder. File2folder now supports both local and network shares. When you are ready to create the folders and move the files, click Move! You’ll see the move progress displayed in the window. When the process is finished, you’ll have all your movie file in individual folders.   Change your mind? Just click the Undo! button…   …and the move and folder creation process will be undone. If you would like to have the folder monitored for new files, click the Start button. File2folder will process any new files it discovers every 180 seconds. To turn it off, click Stop. This simple little program is a huge timesaver for those looking to organize movie collections for their HTPC. We should also note that this will work with any files, not just videos. Download file2folder Similar Articles Productive Geek Tips Hack: Turn Off Debug Mode in VMWare Workstation 6 BetaAdd Images and Metadata to Windows 7 Media Center Movie LibraryAdd Folders to the Movie Library in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterMove the Public Folder in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician

    Read the article

  • Validation and Error Generation when using the Data Mapper Pattern

    - by AndyPerlitch
    I am working on saving state of an object to a database using the data mapper pattern, but I am looking for suggestions/guidance on the validation and error message generation step (step 4 below). Here are the general steps as I see them for doing this: (1) The data mapper is used to get current info (assoc array) about the object in db: +=====================================================+ | person_id | name | favorite_color | age | +=====================================================+ | 1 | Andy | Green | 24 | +-----------------------------------------------------+ mapper returns associative array, eg. Person_Mapper::getPersonById($id) : $person_row = array( 'person_id' => 1, 'name' => 'Andy', 'favorite_color' => 'Green', 'age' => '24', ); (2) the Person object constructor takes this array as an argument, populating its fields. class Person { protected $person_id; protected $name; protected $favorite_color; protected $age; function __construct(array $person_row) { $this->person_id = $person_row['person_id']; $this->name = $person_row['name']; $this->favorite_color = $person_row['favorite_color']; $this->age = $person_row['age']; } // getters and setters... public function toArray() { return array( 'person_id' => $this->person_id, 'name' => $this->name, 'favorite_color' => $this->favorite_color, 'age' => $this->age, ); } } (3a) (GET request) Inputs of an HTML form that is used to change info about the person is populated using Person::getters <form> <input type="text" name="name" value="<?=$person->getName()?>" /> <input type="text" name="favorite_color" value="<?=$person->getFavColor()?>" /> <input type="text" name="age" value="<?=$person->getAge()?>" /> </form> (3b) (POST request) Person object is altered with the POST data using Person::setters $person->setName($_POST['name']); $person->setFavColor($_POST['favorite_color']); $person->setAge($_POST['age']); *(4) Validation and error message generation on a per-field basis - Should this take place in the person object or the person mapper object? - Should data be validated BEFORE being placed into fields of the person object? (5) Data mapper saves the person object (updates row in the database): $person_mapper->savePerson($person); // the savePerson method uses $person->toArray() // to get data in a more digestible format for the // db gateway used by person_mapper Any guidance, suggestions, criticism, or name-calling would be greatly appreciated.

    Read the article

  • Strategy for avoiding duplicate object ids for data shared across devices using iCloud

    - by rmaddy
    I have a data intensive iOS app that is not using CoreData nor does it support iCloud synching (yet). All of my objects are created with unique keys. I use a simple long long initialized with the current time. Then as I need a new key I increment the value by 1. This has all worked well for a few years with the app running isolated on a single device. Now I want to add support for automatic data sync across devices using iCloud. As my app is written, there is the possibility that two objects created on two different devices could end up with the same key. I need to avoid this possibility. I'm looking for ideas for solving this issue. I have a few requirements that the solution must meet: 1) The key needs to remain a single integral data type. Converting all existing keys to a compound key or to a string or other type would affect the entire code base and likely result in more bugs than it's worth. 2) The solution can't depend on an Internet connection. A user must be able to run the app and add data even with no Internet connection. The data should still resolve properly later when the data syncs through iCloud once a connection is available. I'll accept one exception to this rule. If no other option is available, I may be open to requiring an Internet connection the first time the app's data is initialized. One idea I have been toying around with in my head is logically splitting the integer key into two parts. The high 4 or 5 bits could be used as some sort of device id while the rest represents the actual key. The fuzzy part is figuring out how to come up with non-conflicting device ids that fit in a few bits. This should be viable since I don't need to deal will millions of devices. I just need to deal with the few devices that would be shared by a given iCloud account. I'm open to suggestions. Thanks.

    Read the article

  • Draw images with warped triangles on a web server [migrated]

    - by epologee
    The scenario The Flash front end of my current project produces images that a web server needs to combine into a video. Both frame-rate and frame-resolution are sizeable enough that sending an image sequence to the back end is not feasible (in both time and client bandwidth). Instead, we're trying to recreate the image drawing on the back end as well. Correct and slow, or incorrect and fast The problem is that this involves quite a bit of drawing textured triangles, and two solutions we found in Python (here and there) are so inefficient, that the drawing takes about 60 seconds per frame, resulting in a whopping 7,5 hours of processing time for a 30 second clip. Unacceptable. When using a PHP-module to send commands to ImageMagick for image manipulation, the whole process is super fast (tenths of a second per frame), but ImageMagick seems to be unable to draw triangles the way we do it in the front end, so the final results do not match. Unacceptable. What I'm asking here, is if there's someone who would know a way to solve this issue, by any means necessary that would run on a web server. Warping an image Let me explain the process of the front end: Perform a Delaunay calculation on points in an image to get an evenly distributed mesh of triangles. Offset the points/vertices in the mesh, distorting or warping the image. Draw the warped triangles on a new bitmap. We can send the results (coordinates) of steps 1 and 2 to the back end, to then draw the warped triangles and save it to an image on disk (or append as a frame to the video). But that last step is what I need help with. The Question Is there an alternative to ImageMagick that can draw triangles in a bitmap? Is there some other library, like a C library, that would allow us to do this? Or could we achieve this effect more easily by switching back end technologies, like Ruby? (.Net and Java are, unfortunately, not really options right now) Many thanks. EP. P.S. I'd appreciate re-tagging efforts, I don't quite know what labels to put on this question. Thanks!

    Read the article

  • Good, simple reasons for having multiple environments

    - by smp7d
    Throughout my career I had worked at companies that had a collection of different environments for different purposes. We always had more or less our desktop environment, a test environment, a QA environment, a staging environment and a production environment. This went for both servers/applications and any data sources we were using. When I started at my current company I found that 90% of the apps were either developed on a desktop environment against production data sources or developed directly on the production server depending on the platform. I wasn't fazed because I was hired in part to make changes to improve the way the development team functioned, which was clear from my interview process. We slowly started to turn the philosophy and pretty soon, most of the apps could be run in either a desktop, test or production environment. Not too long after that staging came around as well. Now most of our developers see the benefit of this methodology and defend it vigilantly. However, we have a number of legacy apps that never got migrated. We also have a number of legacy programmers who think of this as a waste of time. Unfortunately, we got lip service but never full buy-in from management. We got what we thought was a commitment to invest substantially in this about a year ago, but nothing materialized despite the considerable planning that we put into it. Now we are finding that we need more and more environments. We need help from the server/network administration teams for setup and we need participation from the business stakeholders to support the release cycle. We are at a place now where a project can function what I consider "normally" only if you have the right people on the project and the time to set up the proper environments. I'd love to present a complete argument, but management really has no time and interest in hearing me out until there is a critical issue. I can't really articulate the benefits simply as it always just seemed second nature to me. I was wondering if there are any good, simple, irrefutable reasons for the separation of environments that would get managers with no development experience to get behind this idea. Are there any good resources/literature on the topic?

    Read the article

  • New RUP Patch for iSupplier Portal, Sourcing and Supplier Lifecycle Management (SLM)

    - by LuciaC
    Just released - the 12.1.3 Rollup (RUP) Patch 17525552:R12.PRC_PF.B for iSupplier Portal, Sourcing and Supplier Lifecycle Management (SLM). Who should apply this patch? Anyone that is on Release 12.1.3 and is using  iSupplier Portal, Sourcing or Supplier Lifecycle Management (SLM) functionality. The following areas have had major fixes: Prospective Supplier Guided Navigation: The train-navigation is introduced for prospective supplier registration so that prospective suppliers can see all steps needed to successfully register themselves. Supplier Registration Workflow Enhancement: With this release, provided the Approval Management Engine (AME) action required notifications for supplier approval, so that all workflow related features can be enabled. Vacation rules can be set, approvals can be forwarded and more information can be requested through the notification itself.  Additionally AME parallel Approval support for Supplier Registration approvals has been added. Reinstate Supplier Request: Allow buyer to reopen/reinstate the rejected supplier. Supplier is able to access their previously rejected registration again and make changes and resubmit request. Contact Address Association: The prospective supplier is allowed to associate addresses with contacts (including Primary) during the prospective supplier registration process. Primary Contact Enhancement: The prospective supplier can be registered without creating a user account for the primary contact. Mandatory Attributes: In the negotiation requirement creation page, the lookup meaning of 'Internal' has been changed to 'Internal Optional', and a new lookup value with meaning as 'Internal Required' has been added. The values available in the 'Type' dropdown now are Display Only, Internal Optional, Internal Required, Supplier Optional and Supplier Required.  So now during supplier evaluations, internal user response can be set as mandatory by using Internal Required type during requirement creation. Notifications to Supplier:  When the supplier saves and submits their supplier registration request, then a notification with a registration status page link will be sent for further access.  When the buyer approves, rejects or returns the request, the supplier will be notified in an email with the current status. There are also 10 major enhancements included in this RUP. For information about this RUP; including, the fixes and enhancements included, how to access and apply the patch, performing an impact analysis on your system, and testing recommendations, see Doc ID 1591198.1.  Don’t delay apply the patch today!

    Read the article

  • Advice on how to build html5 basic tile game (multi player, cross device)

    - by Eric
    I just read http://buildnewgames.com/real-time-multiplayer/ which explains the fundamentals and bets practices to build a massive real time multiplayer html5 game. My question is however given the “simplicity” of the game I need to build (simple kind of scratch game where you find or not something behind a tile), do I really need complex tools (canvas or node.js for example) ? The game The gamestakes place with a picture of our office as a background (tilemap). For HR purpose, we wish to create the following game fore employees: each day they can come to the website and click on a certain number of tiles (3 max per day) and find behind it motivation advice and interesting facts about the company. The constraints and rules the screen is divided into isometric 2D square tiles. There are basically an image (photograph of our office) number of tiles on the screen game: about 10,000 to much more (with scroll , see below) the players can scroll in 4 directions there are only 2 types of tiles: already open and closed player can open tiles that have not been yet open by other players there is no path for players : any player can click on any tile on the screen at any moment (if it’s not already done by another player) 2 players can’t be on the same tile at the same moment (or if they can, I’ll have to manage to see which one clicked on it first) only one type of player (all with similar roles), no weapon, no internal score… very simple game. no complex physics (collision only occurs if 2 players are on the same tile) The target I need to achieve: cross device, cross browsers high performance reaction (subsecond reactions) average nb of players per hour: up to 10K players per hour (quite high indeed but it’s because we aim at proving our case for the game to our business unit) So what I would like to know: 2D Tiled map: Do I need tiledmapeditor or can I enable me split the screen like here ? should I use canvas or plain html/css could be sufficient for my need? do I need a game engine/framework such as melon.js or crafty./js ? (even if the game play is extremely basic, I do need mouse and touché device support, mouse emulations on touch devices…) or ca I easily/quickly do it without? for my constraints and targets, should I use CPU acceleration ? for my constraints and targets, should I use web workers ? for the database, for a massively real time game should I avoid to put the current locations of player in MySQL as i feel it might slow me down. What kind of DB should I implement ? Thanks for your help !

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

  • JavaOne 2013: (Key) Notes of a conference – State of the Java platform and all the roadmaps by Amis

    - by JuergenKress
    Last week’s JavaOne conference provided insights in the roadmap of the Java platform as well as in the current state of things in the Java community. The close relationship between Oracle and IBM concerning Java, the (continuing) lack of such a relationship with Google, the support from Microsoft for Java applications on its Azure cloud and the vibrant developer community – with over 200 different Java User Groups in many countries of the world. There were no major surprises or stunning announcements. Java EE 7 (release in June) was celebrated, the progress of Java 8 SE explained as well as the progress on Java Embedded and ME. The availability of NetBeans 7.4 RC1 and JDK 8 Early Adopters release as well as the open sourcing of project Avatar probably were the only real news stories. The convergence of JavaFX and Java SE is almost complete; the upcoming alignment of Java SE Embedded and Java ME is the next big consolidation step that will lead to a unified platform where developers can use the same skills, development tools and APIs on EE, SE, SE Embedded and ME development. This means that anything that runs on ME will run on SE (Embedded) and EE – not necessarily the reverse because not all SE APIs are part of the compact profile or the ME environment. However, the trimming down of the SE libraries and the increased capabilities of devices mean that a pretty rich JVM runs on many devices – such as JavaFX 8 on the Raspberry PI. The major theme of the conference was Internet of Things. A world of things that are smart and connected, devices like sensors, cameras and equipment from cars, fridges and television sets to printers, security gates and kiosks that all run Java and are all capable of sending data over local network connections or directly over the internet. The number of devices that has these capabilities is rapidly growing. This means that the number of places where Java programs can help program the behavior of devices is growing too. It also means that the volume of data generated is expanding and that we have to find ways to harvest that data, possibly do a local pre-processing (filter, aggregate) and channel the data to back end systems. Terms typically used are edge devices (small, simple, publishing data), gateways (receiving data from many devices, collecting and consolidating, pre-processing, sending onwards to back end – typically using real time event processing) and enterprise services – receiving the data-turned-information from the gateways to further consolidate, distribute and act upon. A cheap device like the Raspberry PI is a perfect way to get started as a Java developer with what embedded (device) programming means and how interaction with physical input and output takes place. Roadmaps The over all progress on Java is visualized in this overview: Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Amis,OOW,Oracle OpenWorld,JavaOne,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Toshiba wireless is blocked

    - by zorrillo
    I have the same problem, a 32 bits toshiba nb255, it first had the windows 7 bu next I installed the ubuntu 11.04. The wifi does not turn on. I used the following issues the commands rfkill unblock wlan0, sudo ifconfig wlan0 down; they were not able. by setting up the bios in advanced menu, the wireless communication sw in ON, but it did not work also. neither the utilities toshiba nor utilities of ubuntu (wicd, wifi radar). by using gedit to file group, nothing. by installing madwifi packet, nothing. by exporting the wifi driver from windows to ubuntu, by means of the NDISwrapper packet, neither. I put the current scripts of the ouput of the cli root@zorrillo:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes root@zorrillo:~# sudo lspci | grep Atheros 07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) root@zorrillo:~# root@zorrillo:~# ifconfig -a eth0 Link encap:Ethernet direcciónHW 88:ae:1d:47:df:e1 ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) Interrupción:43 Dirección base: 0xe000 lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:16436 Métrica:1 Paquetes RX:8 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:8 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:480 (480.0 B) TX bytes:480 (480.0 B) ppp0 Link encap:Protocolo punto a punto Direc. inet:189.203.115.236 P-t-P:192.168.226.1 Másc:255.255.255.255 ACTIVO PUNTO A PUNTO FUNCIONANDO NOARP MULTICAST MTU:1500 Métrica:1 Paquetes RX:6384 errores:30 perdidos:0 overruns:0 frame:0 Paquetes TX:6893 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:3 Bytes RX:5473081 (5.4 MB) TX bytes:974316 (974.3 KB) wlan0 Link encap:Ethernet direcciónHW 00:26:4d:c3:d0:44 DIFUSIÓN MULTICAST MTU:1500 Métrica:1 Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B) note.-it is logical all the counters are cero if the wireless device is down root@zorrillo:/home/zorrillo/Descargas/802BGA# ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill root@zorrillo:/home/zorrillo/Descargas/802BGA# It would seem the wireless switching does not react with whichever ubuntu 11.04 command (I hope to be wrong). The target remains the same, in order of the scripts above. I am worried, I have tried to find any answer for days and nights. Toshiba does not supply drivers or soft support for linux, marketing of course. I only see the device is up by protocols and down phisically, My question is, is it possible to enable or not shutdown physically the device?, because in the toshiba model nb255 the wifi is not set up/down bye means of a physical switch, but by means a combination of Fn + F8 (only for windows 7, no one more), Is there one possibility to configure the hot keys in ubuntu?

    Read the article

  • How can I cleanly and elegantly handle data and dependancies between classes

    - by Neophyte
    I'm working on 2d topdown game in SFML 2, and need to find an elegant way in which everything will work and fit together. Allow me to explain. I have a number of classes that inherit from an abstract base that provides a draw method and an update method to all the classes. In the game loop, I call update and then draw on each class, I imagine this is a pretty common approach. I have classes for tiles, collisions, the player and a resource manager that contains all the tiles/images/textures. Due to the way input works in SFML I decided to have each class handle input (if required) in its update call. Up until now I have been passing in dependencies as needed, for example, in the player class when a movement key is pressed, I call a method on the collision class to check if the position the player wants to move to will be a collision, and only move the player if there is no collision. This works fine for the most part, but I believe it can be done better, I'm just not sure how. I now have more complex things I need to implement, eg: a player is able to walk up to an object on the ground, press a key to pick it up/loot it and it will then show up in inventory. This means that a few things need to happen: Check if the player is in range of a lootable item on keypress, else do not proceed. Find the item. Update the sprite texture on the item from its default texture to a "looted" texture. Update the collision for the item: it might have changed shape or been removed completely. Inventory needs to be updated with the added item. How do I make everything communicate? With my current system I will end up with my classes going out of scope, and method calls to each other all over the place. I could tie up all the classes in one big manager and give each one a reference to the parent manager class, but this seems only slightly better. Any help/advice would be greatly appreciated! If anything is unclear, I'm happy to expand on things.

    Read the article

  • Best way to determine surface normal for a group of pixels?

    - by Paul Renton
    One of my current endeavors is creating a 2D destructible terrain engine for iOS Cocos2D (See https://github.com/crebstar/PWNDestructibleTerrain ). It is in an infant stages no doubt, but I have made significant progress since starting a couple weeks ago. However, I have run into a bit of a performance road block with calculating surface normals. Note: For my destructible terrain engine, an alpha of 0 is considered to not be solid ground. The method posted below works just great given small rectangles, such as n < 30. Anything above 30 causes a dip in the frame rate. If you approach 100x100 then you might as well read a book while the sprite attempts to traverse the terrain. At the moment this is the best I can come up with for altering the angle on a sprite as it roams across terrain (to get the angle for a sprite's orientation just take dot product of 100 * normal * (1,0) vector). -(CGPoint)getAverageSurfaceNormalAt:(CGPoint)pt withRect:(CGRect)area { float avgX = 0; float avgY = 0; ccColor4B color = ccc4(0, 0, 0, 0); CGPoint normal; float len; for (int w = area.size.width; w >= -area.size.width; w--) { for (int h = area.size.height; h >= -area.size.height; h--) { CGPoint pixPt = ccp(w + pt.x, h + pt.y); if ([self pixelAt:pixPt colorCache:&color]) { if (color.a != 0) { avgX -= w; avgY -= h; } // end inner if } // end outer if } // end inner for } // end outer for len = sqrtf(avgX * avgX + avgY * avgY); if (len == 0) { normal = ccp(avgX, avgY); } else { normal = ccp(avgX/len, avgY/len); } // end if return normal; } // end get My problem is I have sprites that require larger rectangles in order for their movement to look realistic. I considered doing a cache of all surface normals, but this lead to issues of knowing when to recalculate the surface normals and these calculations also being quite expensive (also how large should the blocks be?). Another smaller issue is I don't know how to properly treat the case when length is = 0. So I am stuck... Any advice from the community would be greatly appreciated! Is my method the best possible one? Or should I rethink the algorithm? I am new to game development and always looking to learn new tips and tricks.

    Read the article

  • Variable number of GUI Buttons

    - by Wakaka
    I have a generic HTML5 Canvas GUI Button class and a Scene class. The Scene class has a method called createButton(), which will create a new Button with onclick parameter and store it in a list of buttons. I call createButton() for all UI buttons when initializing the Scene. Because buttons can appear and disappear very often during rendering, Scene would first deactivate all buttons (temporarily remove their onclick, onmouseover etc property) before each render frame. During rendering, the renderer would then activate the required buttons for that frame. The problem is that part of the UI requires a variable number of buttons, and their onclick, onmouseover etc properties change frequently. An example is a buffs system. The UI will list all buffs as square sprites for the current unit selected, and mousing over each square will bring up a tooltip with some information on the buff. But the number of buffs is variable thus I won't know how many buttons to create at the start. What's the best way to solve this problem? P.S. My game is in Javascript, and I know I can use HTML buttons, but would like to make my game purely Canvas-based. Create buttons on-the-fly during rendering. Thus I will only have buttons when I require them. After the render frame these buttons would be useless and removed. Create a fixed set of buttons that I'm going to assume the number of buffs per unit won't exceed. During each render frame activate the buttons accordingly and set their onmouseover property. Assign a button to each Buff instance. This sounds wrong as the buff button is a part of the GUI which can only have one unit selected. Assigning a button to every single Buff in the game seems to be overkill. Also, I would need to change the button's position every render frame since its order in the unit's list of buffs matter. Any other solutions? I'm actually quite for idea (1) but am worried about the memory/time issues of creating a new Button() object every render frame. But this is in Javascript where object creation is oh-so-common ({} mainly) due to automatic garbage collection. What is your take on this? Thanks!

    Read the article

  • Developer career feeling like going back in time every new job [closed]

    - by komediant
    Is there a good category for this question? My background is bachelor in ICT and for a hobby I am programming already since I was around twelve I think. Started with QBasic, Pascal, C, Java et cetera. Currently I am working for about eight/nine years. Half academics/medical and half company world. A few years ago I started with frameworks and I began with Grails (underlying Spring/Hibernate), which was a heavenly job, very productive and no hassle. My previous job I developed in pure Spring/Hibernate Java, which was a bit more writing annotations and XML and no conventions like Grails. But still, I did like Spring/Hibernate a lot and the professional setup with a developmentstreet, versioning, Jenkins/Sonar, log4j and a good IDE like IntellIJ. It felt quite 'clear' and organised, although I knew Grails which felt a bit more productive. But...at my current job almost half the code is pure servlet, hard coded JDBC (connections handled by yourself), scriptlets in all JSP pages, no service layer, no versioning, no Maven, HTML in DAO-layer, JAR-hell, no hot swap deployment locally, every change you have to deploy and hope it works fine on the server. All local development needs ugly scriptlet tags to check which environment it is running. Et cetera. Now and then developers work over in the evening - I don't - and still lots of issues are not solved and new projects are waiting. I hear the developers complaining, but somehow they feel like what they have now is "advanced" or they are in a sort of comfore zone. The lead developer seems open for new things, but half of the times he says he can implement MVC-framework features himself instead of using what is already out there. So in short, I currently feel like I miss all the modern framework techniques and that the company is going so slow forward. I just work here for two months now. What I do now is also code some partially ugly stuff, but it goes in completely into my nature and I feel uncomfortable with it. Coding something takes long(er) than estimated and my manager complains about why it takes so long and I feel ashamed for myself needing so much time. Where I was used to just writing a query I now build up whole try catch methods. My manager knows my complaints and the developers do so too. There will come a meeting to line out plans for 2013 on technology and the issues I and the company are facing. I am not looking for another job yet, it's close to wehre I live and the economy is fragile. Does anyone else have had this kind of career, like feeling going backwards witch technology? And how did you cope with it?

    Read the article

  • OSB unit testing, part 1 by Qualogy

    - by JuergenKress
    First you need to implement the simple bpel process like this : In my current project, I inherited a lot of OSB components that have been developed by (former) team members, but they all lack unit tests. This is a situation I really dislike, since this makes it much harder to refactor or bug-fix the existing code base. So, for all newly created components (and components I have to bug-fix) I strive to add unit tests. Of course, the unit tests will be created using my favourite testing tool: soapUI ! Unit of test The unit test should be created for the service composition, which in OSB terms should be the proxy service combination with its business service. Now, since you do not want to rely on any other services, you should provide mock services for all services invoked from your Component-Under-Test. In a previous article, I wrote about mocking your services in soapUI. While this approach would also be valid here, creating a mock service (and certainly deploying it on a separate WebServer) does violate one of the core principles of unit testing: to make your unit tests as self-contained as possible, i.e. not depending on any external components. In this article, I will show you how to achieve this by simply providing a mock response inside your unit test. Scenario The scenario I implement for testing is a simple currency converter; the external request consists of a from and a to currency, and an amount (in currency from). The service will perform an exchange rate lookup using the WebServiceX CurrencyConverter and return a response to the caller consisting of both the source and target currencies and amounts. For the purpose of unit testing, I will implement a mock response for the exchange rate lookup. Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: Qualogy,OSB,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • How can I optimize Apache to use 1GB of RAM on my website? [closed]

    - by Markon
    My VPS plan gives me 1GB of RAM burstable to 2GB. Of course I cannot use 2 GB, nor 1 GB, everyday, so I'm planning to optimize the performance of my webserver. The average of hits-per-hour is about 8'000-10'000. This means about 2 connections-per-second. Max hits-per-hour reached until now is about 60'000. That means about 16 connections-per-second. Unluckily my current apache configuration uses too much memory (when there are not connected clients - usually during the night - it uses about 1GB) so I've tried to customize the apache installation to fit to my needs. I'm using Ubuntu, kernel 2.6.18, with apache2-mpm-worker, since I've read it requires less memory, and fcgid ( + PHP). This is my /etc/apache2/apache2.conf: Timeout 45 KeepAlive on MaxKeepAliveRequests 100 KeepAliveTimeout 10 <IfModule mpm_worker_module> StartServer 2 MinSpareThreads 25 MaxSpareThreads 75 MaxClients 100 MaxRequestsPerChild 0 </IfModule> This is the output of ps aux: www-data 9547 0.0 0.3 423828 7268 ? Sl 20:09 0:00 /usr/sbin/apache2 -k start root 17714 0.0 0.1 76496 3712 ? Ss Feb05 0:00 /usr/sbin/apache2 -k start www-data 17716 0.0 0.0 75560 2048 ? S Feb05 0:00 /usr/sbin/apache2 -k start www-data 17746 0.0 0.1 76228 2384 ? S Feb05 0:00 /usr/sbin/apache2 -k start www-data 20126 0.0 0.3 424852 7588 ? Sl 19:24 0:02 /usr/sbin/apache2 -k start www-data 24260 0.0 0.3 424852 7580 ? Sl 19:42 0:01 /usr/sbin/apache2 -k start while this is ps aux for php5: www-data 7461 2.9 2.2 142172 47048 ? S 19:39 1:39 /usr/lib/cgi-bin/php5 www-data 23845 1.3 1.7 135744 35948 ? S 20:17 0:15 /usr/lib/cgi-bin/php5 www-data 23900 2.0 1.7 136692 36760 ? S 20:17 0:22 /usr/lib/cgi-bin/php5 www-data 27907 2.0 2.0 142272 43432 ? S 20:00 0:43 /usr/lib/cgi-bin/php5 www-data 27909 2.5 1.9 138092 40036 ? S 20:00 0:53 /usr/lib/cgi-bin/php5 www-data 27993 2.4 2.2 142336 47192 ? S 20:01 0:50 /usr/lib/cgi-bin/php5 www-data 27999 1.8 1.4 135932 31100 ? S 20:01 0:38 /usr/lib/cgi-bin/php5 www-data 28230 2.6 1.9 143436 39956 ? S 20:01 0:54 /usr/lib/cgi-bin/php5 www-data 30708 3.1 2.2 142508 46528 ? S 19:44 1:38 /usr/lib/cgi-bin/php5 As you can see it use a lot of memory. How can I reduce it to fit to just 1GB of RAM? PS: I also think about the switch to nginx, if Apache can't fit to my needs...

    Read the article

  • What ever happened to the Defense Software Reuse System (DSRS)?

    - by emddudley
    I've been reading some papers from the early 90s about a US Department of Defense software reuse initiative called the Defense Software Reuse System (DSRS). The most recent mention of it I could find was in a paper from 2000 - A Survey of Software Reuse Repositories Defense Software Repository System (DSRS) The DSRS is an automated repository for storing and retrieving Reusable Software Assets (RSAs) [14]. The DSRS software now manages inventories of reusable assets at seven software reuse support centers (SRSCs). The DSRS serves as a central collection point for quality RSAs, and facilitates software reuse by offering developers the opportunity to match their requirements with existing software products. DSRS accounts are available for Government employees and contractor personnel currently supporting Government projects... ...The DoD software community is trying to change its software engineering model from its current software cycle to a process-driven, domain-specific, architecture-based, repository-assisted way of constructing software [15]. In this changing environment, the DSRS has the highest potential to become the DoD standard reuse repository because it is the only existing deployed, operational repository with multiple interoperable locations across DoD. Seven DSRS locations support nearly 1,000 users and list nearly 9,000 reusable assets. The DISA DSRS alone lists 3,880 reusable assets and has 400 user accounts... The far-term strategy of the DSRS is to support a virtual repository. These interconnected repositories will provide the ability to locate and share reusable components across domains and among the services. An effective and evolving DSRS is a central requirement to the success of the DoD software reuse initiative. Evolving DoD repository requirements demand that DISA continue to have an operational DSRS site to support testing in an actual repository operation and to support DoD users. The classification process for the DSRS is a basic technology for providing customer support [16]. This process is the first step in making reusable assets available for implementing the functional and technical migration strategies. ... [14] DSRS - Defense Technology for Adaptable, Reliable Systems URL: http://ssed1.ims.disa.mil/srp/dsrspage.html [15] STARS - Software Technology for Adaptable, Reliable Systems URL: http://www.stars.ballston.paramax.com/index.html [16] D. E. Perry and S. S. Popovitch, “Inquire: Predicate-based use and reuse,'' in Proceedings of the 8th Knowledge-Based Software Engineering Conference, pp. 144-151, September 1993. ... Is DSRS dead, and were there any post-mortem reports on it? Are there other more-recent US government initiatives or reports on software reuse?

    Read the article

  • PBCS Hyperion Planning in the Cloud Implementation Workshop

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Oracle Planning and Budgeting Cloud Service (PBCS) opens up opportunities for organizations of all sizes to streamline planning and forecasting, accelerate deployment, and reduce costs. This one-day in-person workshop is delivered by Oracle Development (free to OPN member partners), and will cover the handoff from selling-to-implementing of PBCS. Although the basic building blocks are the same as with on-premises Planning, there is a paradigm shift when it comes to selling and implementing a Cloud Service solution. The value proposition behind Oracle Planning and Budgeting Cloud Service is all about the deployment model, how it’s sold and how it gets implemented – simplicity, fast adoption and flexible deployment, without sacrificing first-class functionality. To be successful, the entire cycle from sales to implementation should consistently support this value proposition to your clients. This training event is for OPN member partners whose business roles involve presales, implementation consulting, and support. This workshop briefly reviews the sales approach, as background, with emphasis on partner sales support. The main objective is to learn what is needed to successfully implement Oracle Planning and Budgeting Cloud Service once the sales hand off is made – how to leverage your current Hyperion Planning knowledge and use the features designed specifically to build out a Cloud Service solution. This Workshop is being offered at three locations for partners from all countries in EMEA: June 24, 2014: Kista, Sweden June 26, 2014: Reading, United Kingdom June 29-30, 2014 (split days): Dubaï, United Arab Emirates To get more information, to check pre-requisites, and to register, click here. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • How is fundamental mathematics efficiently evaluated by programming languages?

    - by Korvin Szanto
    As I get more and more involved with the theory behind programming, I find myself fascinated and dumbfounded by seemingly simple things.. I realize that my understanding of the majority of fundamental processes is justified through circular logic Q: How does this work? A: Because it does! I hate this realization! I love knowledge, and on top of that I love learning, which leads me to my question (albeit it's a broad one). Question: How are fundamental mathematical operators assessed with programming languages? How have current methods been improved? Example var = 5 * 5; My interpretation: $num1 = 5; $num2 = 5; $num3 = 0; while ($num2 > 0) { $num3 = $num3 + $num1; $num2 = $num2 - 1; } echo $num3; This seems to be highly inefficient. With Higher factors, this method is very slow while the standard built in method is instantanious. How would you simulate multiplication without iterating addition? var = 5 / 5; How is this even done? I can't think of a way to literally split it 5 into 5 equal parts. var = 5 ^ 5; Iterations of iterations of addition? My interpretation: $base = 5; $mod = 5; $num1 = $base; while ($mod > 1) { $num2 = 5; $num3 = 0; while ($num2 > 0) { $num3 = $num3 + $num1; $num2 = $num2 - 1; } $num1 = $num3; $mod -=1; } echo $num3; Again, this is EXTREMELY inefficient, yet I can't think of another way to do this. This same question extends to all mathematical related functions that are handled automagically.

    Read the article

  • Glm Vector Transformations [duplicate]

    - by Reanimation
    This question already has an answer here: Car-like Physics - Basic Maths to Simulate Steering 2 answers I have a cube rendered on the screen which represents a car (or similar). Using Projection/Model matrices and Glm I am able to move it back and fourth along the axes and rotate it left or right. I'm having trouble with the vector mathematics to make the cube move forwards no matter which direction it's current orientation is. (ie. if I would like, if it's rotated right 30degrees, when it's move forwards, it travels along the 30degree angle on a new axes). I hope I've explained that correctly. This is what I've managed to do so far in terms of using glm to move the cube: glm::vec3 vel; //velocity vector void renderMovingCube(){ glUseProgram(movingCubeShader.handle()); GLuint matrixLoc4MovingCube = glGetUniformLocation(movingCubeShader.handle(), "ProjectionMatrix"); glUniformMatrix4fv(matrixLoc4MovingCube, 1, GL_FALSE, &ProjectionMatrix[0][0]); glm::mat4 viewMatrixMovingCube; viewMatrixMovingCube = glm::lookAt(camOrigin, camLookingAt, camNormalXYZ); vel.x = cos(rotX); vel.y=sin(rotX); vel*=moveCube; //move cube ModelViewMatrix = glm::translate(viewMatrixMovingCube,globalPos*vel); //bring ground and cube to bottom of screen ModelViewMatrix = glm::translate(ModelViewMatrix, glm::vec3(0,-48,0)); ModelViewMatrix = glm::rotate(ModelViewMatrix, rotX, glm::vec3(0,1,0)); //manually turn glUniformMatrix4fv(glGetUniformLocation(movingCubeShader.handle(), "ModelViewMatrix"), 1, GL_FALSE, &ModelViewMatrix[0][0]); //pass matrix to shader movingCube.render(); //draw glUseProgram(0); } keyboard input: void keyboard() { char BACKWARD = keys['S']; char FORWARD = keys['W']; char ROT_LEFT = keys['A']; char ROT_RIGHT = keys['D']; if (FORWARD) //W - move forwards { globalPos += vel; //globalPos.z -= moveCube; BACKWARD = false; } if (BACKWARD)//S - move backwards { globalPos.z += moveCube; FORWARD = false; } if (ROT_LEFT)//A - turn left { rotX +=0.01f; ROT_LEFT = false; } if (ROT_RIGHT)//D - turn right { rotX -=0.01f; ROT_RIGHT = false; } Where am I going wrong with my vectors? I would like change the direction of the cube (which it does) but then move forwards in that direction.

    Read the article

< Previous Page | 578 579 580 581 582 583 584 585 586 587 588 589  | Next Page >