Search Results

Search found 40031 results on 1602 pages for 'command message'.

Page 584/1602 | < Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >

  • Can not connect remotely to MySQL Server on Ubuntu 10.10

    - by BobFranz
    Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

    Read the article

  • Transferring files from ftp to local system

    - by user1056221
    I want to copy a file from FTP and paste it to my local system. I want to run this through a batch file. I am trying this for a week. But I couldn't find the solution. Anyone help me please.... This is my actual work Want to copy a file named "Friday.bat" from ftp://172.16.3.132 (with username and password) So I use the below coding: @echo off @ftp -i -s:"%~f0"&GOTO:EOF open 172.16.3.132 mmftp ((((pasword entered here))))) binary get Friday.bat pause Result: ftp> @echo off ftp> @ftp -i -s:"%~f0"&GOTO:EOF Invalid command. ftp> open 172.16.3.132 Connected to 172.16.3.132. 220 Welcome to ABL FTP service. User (172.16.3.132:(none)): 331 Please specify the password. 230 Login successful. ftp> binary 200 Switching to Binary mode. ftp> get Friday.bat 200 PORT command successful. Consider using PASV. 550 Failed to open file. ftp> pause Finally, a file named Friday.bat is copied to my local system with 0 bytes, but it will not open.

    Read the article

  • Hard Reset USB in Ubuntu 10.04

    - by Cory
    I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

    Read the article

  • JavaScript settings are on but I still have issues with web sites using JavaScript.

    - by Mike
    I have two computers that are the same at home except I have installed Adobe Acrobat 9 Pro Extended on my main computer along with the 2010 Outlook (Beta). I have issues when I log into a website that uses pop up calendars to select the date. I pasted it below. I checked my other computer and it is fine. I've checked the Java setting and they are correct. I am at a loss. Any suggestions? Webpage error details User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; HPDTDF; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; eMusic DLM/4; .NET4.0C) Timestamp: Mon, 26 Jul 2010 22:03:59 UTC Message: 'CalendarPopup' is undefined Line: 390 Char: 2 Code: 0 Message: 'CalendarPopup' is undefined Line: 410 Char: 2 Code: 0

    Read the article

  • Win7 loses connection to network shares after resume unless server specified using FQDN

    - by Szonja Zemkó
    My Win7 client has a connection to a Linux server and its shared folders. The problem occurs when the computer wakes up after a sleep and then one of the shared folders is not accessible. I receive the following message: Error code: 80070035, The network path was not found. I have problem with one specific folder only. When I restart the computer this problematic folder is accessible again. When I log off before sleep the folder is accessible after wakeup. If I try to access the folder by using the FQDN of the server or the server IP it is also accessible. As a temporary solution I mapped the folder to a network drive using the FQDN and it's working fine but it's inconvenient since every other folder is accessible on the server. To summarize: \server\problematicshare no longer works after resume (the Samba server sees my client connect, then disconnects a few seconds later while I receive the above error message) \server\othershare works after resume \fqdn.of.server\problematicshare always works \ip.of.server\problematicshare always works once the problem manifests, I'm no longer able to restart the "Workstation" service (it is not responding) restarting the "Computer Browser" service has no apparent effect the event log doesn't contain anything that seems relevant "ping server" works

    Read the article

  • How To Completely Move Users/Program Files/Program Files (x86)/ProgramData (Folders) To Another Partition(s) On Windows 8?

    - by Enigma83
    I am attempting to move folders Users Program Files Program Files (x86), ProgramData (at the root of the C drive) to at least 2 other partitions, preferably on a fresh install. I have read that there are methods for doing this post-install, but it seems like it would be a bit more tedious to do things that way. I want to move the 2 Program Files folders to another partition on the same HDD, and Users/ProgramData will go to yet another partition on same HDD. I have done a bit of research on this, read up on some things that involved booting into Audit Mode, using the RoboCopy command to copy folders via booting into my Windows 8 USB drive, creating NTFS junctions/symbolic links, Registry edits, as well as accomplishing this automatically by creating an auto-attend file which Windows Setup processes automatically before the user is ever booted in for the 1st time. I tried this morning and now have a basic installation in which programs like Internet Explorer fail to open, certain files can't be found/opened (even if I click on them directly), an example is Regedit. Also, I can't run the Command/DOS (CMD) prompt as Administrator (or otherwise, as any other user), can't activate the real Administrator account or open any of the Administrative Tools (despite having added them to my Start Screen). So far I have only tried RoboCopy-ing Program Files and Program Files (x86) so far, creating junction points for them, and editing the Registry in the relevant locations. This is what I'm left with now. I also found the following blog article which describes how to do this for Windows 7 So, where should I go from here and where can I find more information? And how can this be done without disabling the Metro apps, which I've read will stop working if you move ProgramData. Once I have everything moved, where do I install programs to? Do I tell them to install to C:\Program Files\Program Files (x86) or to the junctioned/symbolic-linked partition/drive? I plan to test in VMware virtual machines from here on until things are working correctly, while using a baseline default install for daily tasks.

    Read the article

  • Multiboot USB (OSX only): How to customize partition name?

    - by wrk2bike
    Trying to deal with all the Mac OSX recovery disks I've got by moving them to bootable USB images. I've got a big USB drive with multiple partitions for each recovery disk, and it's easy to use Disk Utility to "restore" the recovery DVD to a partition. When I boot my target Mac while holding down the Alt key, I can see all my bootable images and they work great. Problem is, they've all got the same name: "Mac OS X Install DVD." I manage Macs of various vintages. If my target Mac needs 10.6.3 for example, my only option seems to be to try each one until I get past the "Mac OSX can't be installed on this computer" message. I originally named my partitions with the OSX revision number, but that name is replaced by the disk image name during Disk Utility restore. Is there any way to customize the name during or after Disk Utility restore? I tried making a new DVD image on disk first and renaming it, but when I restore it to my recovery partition it has the original name. EDIT: After booting to the wrong partition, and getting the "..can't be installed" message, I can open the Startup Disk menu and see the other partitions - and as I select each one, the info at the bottom indicates which OS revision is on that partition. So I know the info is in there! Just want it at the boot screen if possible.

    Read the article

  • How to "open" existing VMs in Hyper-V without importing them?

    - by Borek
    I had a PC with two physical disks: C: containing the host operating system D: containing a folder D:\VMs where all my virtual machines were stored Now, the C: disk died. I bought a new one, reinstalled Windows on it, enabled Hyper-V feature and now I just need to open the VMs from the D:\VMs folder. However, I don't seem to be able to find a menu item or anything that would allow me to do that - the only thing I see is the "import" command which unfortunately requires the VMs to be explicitly exported (my machines weren't). I firmly believe that when I have all the files constituting a VM (the VHD file, some XML files describing the settings etc.) it must be somehow possible to just "open" these existing VMs in Hyper-V, right? What command am I missing? Edit: I know I can create a blank virtual machines and then just point them to use existing VHDs. However, I am not sure about all the different settings I've made to those VMs so I hope there's a way to simply open those existing VMs instead of recreating them.

    Read the article

  • Run a shell script using cron

    - by Blanca
    Hi! I have this FeedIndexer.sh: #!/bin/sh java -jar FeedIndexer.jar Just to run FeedIndexer.jar which is in the same directory as the .sh, I would like to run it using crontab, so I did this: # /etc/crontab: system-wide crontab # Unlike any other crontab you don't have to run the `crontab' # command to install the new version when you edit this file # and files in /etc/cron.d. These files also have username fields, # that none of the other crontabs do. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) 01 01 * * * root run-parts --report /home/slosada/workspace/FeedIndexer/target/FeedIndexer.sh # But I don't know how to run it. Have i made any mistake?? Thank you!

    Read the article

  • Log Problem and bash script

    - by GvWorker
    Hello Guys, I have 11 Debian servers running on rackspace cloud hosting. All running VHCS2 for hosting management. 1 server is used for application and 10 are used for only smtp. My question is regarding smtp servers. Each server hosted 1 domain. My problem is when my client use smtp there's a log created in this directory /var/log/ but within 24 hours drives are full and server refuse all smtp connections. Then I deleted the logs and ran following command to check the disk space. df -h but it shows hdd still full and server is still refusing the smtp connections. Then I ran following command to see the truth du --max-depth=1 -h It shows the truth. The real disk space used. Then I rebooted the server and now server working fine. But after few hours same situation happened. Then I created the following script. #!/bin/sh rm -fr /var/log/* rm -fr /var/log/apache2/*.log rm -fr /var/log/apache2/*.log.* rm -fr /var/log/apache2/users/* rm -fr /var/log/apache2/backup/* reboot It worked for days but after that logs are again filling the hdd. Now I want the following solutions. If anybody can help me. When I delete files from server hdd will free up without rebooting Log should be in specific range. Like a specific size of file where old data overwrite with new data

    Read the article

  • The requested operation has failed! (cannot find answer)

    - by Geoff
    I know this problem is plastered all over the web but I've been searching and trying for hours with no luck. Can someone please give me some help? I originally installed Apache 2.0.64 along with PHP 5.2.17, I went through all of the steps in this tutorial with no luck, I found that the culprit was the LoadModule line. After looking on the internet I found a whole bunch of stuff but a lot of it was referring to PHP 5 and Apache 2.2. Since there seemed to be more info on apache 2.2 I removed apache 2.0.64 and installed 2.2. I added the code to LoadModule in the conf file but I got the same problem. I then followed the steps in this tutorial because it was slightly different with some things I hadn't tried yet but still I get the same problem. If I comment out LoadModule... it works fine but otherwise I get "The requested operation has failed!". This is what I ended up keeping since it works only having to comment one line. LoadModule php5_module "c:/php/php5apache2_2.dll" <IfModule mod_php5.c> AddType application/x-httpd-php .php PHPIniDir "c:/php" DirectoryIndex index.php </IfModule> EDIT: How can I stop getting this error message? UPDATE: Also, please note that I took note of the message in the PHP site that stated if PHP 5.2 was to be run with Apache to use the VC6 and not VC9. I had VC9 so I replaced it with VC6, the file is labeled php-5.2.17-nts-Win32-VC6-x86.zip

    Read the article

  • How to search file for matching whole lines?

    - by WilliamKF
    I have a command which sends to stdout a series of numbers, each on a new line. I need to determine whether a particular number exists in the list. The match needs to be exact, not a subset. For example, a simple way to approach this that does not work would be to do: /run/command/outputing/numbers | grep -c <numberToSearch> My this gives a false positive on the following list when searching for '456': 1234567 98765 23 1771 If the count is non-zero, a match was found or if it was zero, the number is not in the list. The issue with this is that the numberToSearch could match a subsequence of numbers on a line, instead I only want hits on the whole line. I looked at the man page for grep and did not see any way to only match whole lines. Is there a way to do this, or would I be better off using awk or sed or some other tool instead? I need a binary answer as to whether the number being search for is present or not.

    Read the article

  • Can’t connect to SQL Server 2008 - looks like Shared Memory problem

    - by Proposition Joe
    I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

    Read the article

  • Windows 7 : access denied to ONE server from ONE computer

    - by Gregory MOUSSAT
    We have a domain served by some Windows 2003 servers. We have several Windows 7 Pro clients. ONE client computer can't acces ONE member Windows 2003 server. The other computers can acces every servers. And the same computer can access other servers. With explorer, the message says the account is no activated. With the command line, the message says the account is locked. With commande line : net use X: \\server\share --> several seconds delay, then error (says the account is locked) net use X: \\server\share /USER:current_username --> okay net use X: \\server\share /USER:domain_name\current_username --> okay From the same computer, the user can access other servers. From another computer, the same user can access any server, including the one denied from the original computer. Aleady done : unjoin then join the cilent from the domain. check the logs on the server : nothing about the failed attempts (?!) Is their any user mapping I'm not aware of ?

    Read the article

  • Cannot access Domain Controller through VPN

    - by Markus
    In our small network there is a Windows 2008 R2 Domain Controller that also serves as Remote Access Server. For years, we could access this server and the resources in the network over a VPN connection without any problem. Since some time however, I am able to connect to the VPN, but my Windows 8 client (and another one I used for testing purposes) is not able to connect the domain controller afterwards. I can access any other server in the network, but there seems to be a problem regarding the trust between the client(s) and the server. If I connect the client to the network directly over a LAN cable, everything works as expected. Also I can connect to another server over VPN and open a RDP prompt to the DC without a problem. On the client, whenever I try to access the DC, I get an access denied message. I've tried to update the group policies both over VPN and LAN. Also, I've removed the client from the domain and re-added it. The client shows a message that Windows requires valid login information when connected to the VPN - but my credentials are valid. They work when I logon to the client when not connected to the VPN and also when connected to the LAN. Turning off the firewall on the client and the server did not change anything. DNS resolution works both on the server and the client. What else can I do to diagnose and solve the problem?

    Read the article

  • Iptables and system-config-firewall

    - by nivde92
    I had a set of netfilter rules set with iptables, but someone else told me to use system-config-firewall to add a rule for sharing files with Windows. (Samba) This rewrote the iptables rules file and I lost my own custom rules. I have a backup copy, but am having trouble restoring them. Edit: The server is Centos, I already tried to restore the rules with iptables-restore < /root/working.iptables.rules but for some reason the rules don't change. What are you trying to do? Trying to restore the iptable rules that I have in a backup file. What have you tried in order to make it happen? I've tried to modify the iptables file with vim, since the command iptables-restore was no help. What results did you expect? To get the old rules back. What actually happened? Nothing, when I run the command or edit the file by hand the file doesn't change at all. Maybe something else it's overwriting.

    Read the article

  • CentOS 6 and Sun/Oracle Java Issue

    - by user1710563
    I have a OpenVZ VPS running CentOS 6.3 64 bit and when I try to install JRE 7 64bit using the command: rpm -Uvh java.rpm It gives me this error: Preparing... ########################################### [100%] 1:jre ########################################### [100%] Unpacking JAR files... rt.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/rt.pack jsse.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/jsse.pack charsets.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/charsets.pack localedata.jar... Error: Could not open input file: /usr/java/jre1.7.0_09/lib/ext/localedata.pack I then tried the command: java -version And it gives me this error: Error occurred during initialization of VM Could not reserve enough space for object heap Error: Could not create the Java Virtual Machine Error: A fatal exception has occurred. Program will exit. Why does this happen if I have more than enough RAM on the VPS to run this (1GB)? Could it be an issue with the host node of the VPS? Thanks EDIT 1: Link to beancounter screenshot http://puu.sh/1xwxB EDIT 2: Link to htop screenshot http://puu.sh/1xwDl

    Read the article

  • Subversion: Secure connection truncated

    - by Nick
    Hi, I'm trying to set-up a subversion server with apache2/webdav access. I've created the repository and configure Apache according to the official book, and I can see the repository in a webbrowser. The browser shows: conf/ db/ hooks/ locks/ Although clicking any of those links gives an empty xml document like: <D:error> <C:error/> <m:human-readable errcode="2"> Could not open the requested SVN filesystem </m:human-readable> </D:error> I've never used subversion before so I assume this is correct? Anyway, when I try to connect via a command line client, it asks for my password, I give it, then I get the (useless) error message: svn: OPTIONS of 'https://svn.mysite.com': Could not read status line: Secure connection truncated (https://svn.mysite.com) The command I'm using is: svn checkout https://svn.mysite.com/ svn.mysite.com Subversion was installed using Ubuntu's package manager. It's version 1.6.6 on Ubuntu 10.04. My Virtualhost Cofiguration: <VirtualHost 123.123.12.12:443> ServerAdmin [email protected] ServerName svn.mysite.com <Location /> DAV svn SVNParentPath /var/svn/repos SVNListParentPath On AuthType Basic AuthName "Subversion Repository" AuthUserFile /etc/subversion/passwd Require valid-user </Location> # Setup The SSL Certificate Paths SSLEngine On SSLCertificateFile /etc/ssl/certs/mysite.com.crt SSLCertificateKeyFile /etc/ssl/private/dmysite.com.key </VirtualHost>

    Read the article

  • Installing Debian 7.6.0 on Lenovo Y50

    - by Girauder
    I was trying to install Debian on my new laptop: a Lenovo Y50 64bit running Windows 8. I got together with a friend and installed Debian in his computer first and had no problems. However I've tried to install Debian several times using the AMD64 KDE and netinst versions and accomplished nothing. First try: installed the KDE version. Grub would let me choose which operating system I wanted, but when I selected Debian it would only load the command line. Second try: Reinstalled but this time with the netinst version. I only got a black screen where I could type but nothing else. Third Try. Tried the netinst again. This time after making the partitions I got a message that said that no EFI partition was found. I ignored the message and this time it wouldn't even load Grub. only a command like interface with grub rescue or something. Not once did I get an error during the installation. What am I doing wrong? I assume the problem is I need to make an EFI partition or something like that. So why is it that during the first installations I didn't ask me for that. And if that is indeed the problem, How can I solve it? Update So the installation failed again... as predicted. Here you can find the Disk Management picture. http://postimg.org/image/433cpfkjz/ Please somebody help me. I keep getting the grub rescue thing. secure boot is disabled and legacy support is set first.

    Read the article

  • Can I remove the original file while running "sort"?

    - by Spaceman
    I'm sorting a huge file, around 400 gigabytes. I'm running out of the disk space and I must do something quickly. Let's assume the original file is called original_file. So I execute (simplified) it as "sort original_file | gzip -c output_file" I use /home/tmp as a temporary dir. From what I see, there are a lot of intermediate files, like so: tmpA465 tmpB154 ... and so on. The smallest ones have size 12 megabytes. The largest have ~182 megabytes. So, it seems that the "sort" command have already split the original file into small pieces, and have sorted them, and now it is merging them into bigger parts (which will be, eventually, sorted as well). Please correct me if I'm wrong. Can I remove the original file right now without terminating the sort process? I've been waiting for a few days for that and it's important that the "sort" command will not fail and I will get the result file, finally. The OS is Ubuntu server 13.04, x64. Thanks!

    Read the article

  • Can’t connect to SQL Server 2008 - looks like Shared Memory problem

    - by user38556
    I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

    Read the article

  • What Logs / Process Stats to monitor on a Ubuntu FTP server?

    - by Adam Salkin
    I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

    Read the article

  • What is a good replacement for StumbleUpon's Share feature?

    - by Mofoo
    I've been using Firefox + StumbleUpon's Share feature with my friends for years now. It is a perfect way of sharing links directly with your friends. You first need to be Following each other and then on the SU toolbar, you can "Share" with your list of friends. You can even include a personal message. The friend will receive a notification with # of pending shares in their toolbar (bold & red). They click the stumble button and it will navigate to the site plus show a yellow bar with your message. I literally use it daily. But then Chrome came along and beat the tar out of Firefox (and other browsers) in terms of usability and performance. But it doesn't (and never will according to Google) allow toolbars. StumbleUpon's solution in Chrome is a fake toolbar (html) that gets injected into the page you're viewing. It's buggy and performance is low. Overall it's not an acceptable solution. I'm looking for a replacement with something that is just as easy to send/receive links. I was thinking of Twitter DM's and using a bookmarklet, but I wanted to survey the collective for other options Thanks in advance for your input!

    Read the article

  • SATA disks boot order?

    - by kire
    I have a computer with 4 SATA disks connected, 2 to the motherboard and 2 to a PCI-card. I've moved all the disks from other computers so 2 of them already has windows installed, the other 2 has just had data on them. I know one of the windows installations works and i want to use this install. If i only have this disk connected the computer boots fine. The problem is that when i boot with all 4 disks connected i get an error message about not being able to boot. This message is in swedish(the wrong windows installation is swedish) so it has to come from that installation. Ok, that means it is trying to boot from wrong disk, i try to pull out that disk but then i get the same error in english. I pull out the fourth disk instead I get another error about NTLDR not being able to load. If i disconnect all drives except the one with the correct windows installation, windows boots fine and i can also connect the other drives while windows is running and browse around in them without any problems. I have no clue what to do. In my BIOS setup i can only select SATA as boot-option, not the order of the disks. I also tried to remove what's left of windows on the other disk by simply deleting everything in explorer(got hidden- and sytstem-files visible). Both windows installations are XP btw. Edit: I switched the cables around and now it magically works. :)

    Read the article

  • Auto-focus xdvi after running viewdvi in Emacs with AUCTeX.

    - by D Connors
    I've been using emacs with AUCTeX mode to edit my latex documents for a few days now, but there's something that's really bugging me. As it should be, whenever I do C-c C-c RET it compiles the file, and if repeat the command it views the output in xdvi. It's also set to the mini-mode TeX-source-specials-mode, so instead of opening a new window in xdvi it only reloads the window that's already open, brings it to the front, and sends me to wherever the pointer was in emacs (forward search). Now here's the problem: Even though the xdvi window is brought to the front, it's not focused. Instead, the emacs windows stays with focus (and that's where any keyboard input goes). And I keep forgetting about that, which leads me to accidentally editing the source file while trying to navigate in xdvi. Not to mention I'm forced to alt-tab in order to focus xdvi, and alt-tab twice if I just want to get back to emacs. Is there a way around this problem? I just want xdvi to be focused whenever I run the view command from emacs.

    Read the article

< Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >