Search Results

Search found 24353 results on 975 pages for 'test coverage'.

Page 585/975 | < Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >

• htaccess order Deny,Allow rule

  - by aspiringCodeArtisan

  I'd like to dynamically add IPs to a block list via htaccess. I was hoping someone could tell me if the following will work in my case (I'm unsure how to test via localhost). My .htaccess file will have the following by default: order allow,deny allow from all IPs will be dynamically appended: Order Deny,Allow Allow from all Deny from 192.168.30.1 The way I understand this is that it is by default allow all with the optional list of deny rules. If I'm not mistaken Order Deny,Allow will look at the Deny list first, is this correct? And does the Allow from all rule need to be at the end?

  Read the article

• The Correct Usage of DLLs with a DirectX Game?

  - by smoth190

  I'm using DirectX 10 (in C++) to make a game engine, and a test driver program on top of it. Now that I've written many messy rough drafts of an engine, I want to make the final (or sorta final) clean version. I choose to follow how I've seen other engines do it, and that's to have all the core nasty messy crap in a DLL, and then you can create games with just a few functions (well, not really :D). However, I'm unsure of what nasty messy crap to put in that DLL. I don't know about speed restrictions with DLLs. What I've done is put my winproc in the DLL, and have a class that takes the messages, and sends them through to the program using the DLL. Then that program does what it needs to do, and calls a rendering functions back in the DLL that renders everything. Only problem is it gets very low FPS (2, to be exact...). I've looked through everything, and I don't know if the way I'm using DLLs in causing this, or its something different. Whether it's the DLLs or not, I still want to know how to use a DLL correctly with a game engine. I like being neat, I hate having to see all those long names of DirectX classes. I use typedef a lot.

  Read the article

• How do i enable deflate on apache2? debian

  - by acidzombie24

  I looked at the other answers and those solutions did not help. I am completely confused how to do this. I know almost nothing about apache nor how to use it and nearly all the article say write this but doesnt tell me where. So far i have done this # a2enmod deflate Module deflate already enabled Then i tried writing this in httpd.conf AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css Then i wrote a longer version which involved deflate.c. After those didnt work i deleted them all and wrote the AddOutputFilterByType line in apache2/sites-enabled/000-default inside of I used this to test http://www.whatsmyip.org/http_compression/ everytime it says no compression. I used another site but i could never compress. Also i restart the server everytime i save a file so what could be the problem and how do i enable this properly?

  Read the article

• Basic 3D Collision detection in XNA 4.0

  - by NDraskovic

  I have a problem with detecting collision between 2 models using BoundingSpheres in XNA 4.0. The code I'm using i very simple: private bool IsCollision(Model model1, Matrix world1, Model model2, Matrix world2) { for (int meshIndex1 = 0; meshIndex1 < model1.Meshes.Count; meshIndex1++) { BoundingSphere sphere1 = model1.Meshes[meshIndex1].BoundingSphere; sphere1 = sphere1.Transform(world1); for (int meshIndex2 = 0; meshIndex2 < model2.Meshes.Count; meshIndex2++) { BoundingSphere sphere2 = model2.Meshes[meshIndex2].BoundingSphere; sphere2 = sphere2.Transform(world2); if (sphere1.Intersects(sphere2)) return true; } } return false; } The problem I'm getting is that when I call this method from the Update method, the program behaves as if this method always returns true value (which of course is not correct). The code for calling is very simple (although this is only the test code): if (IsCollision(model1, worldModel1, model2, worldModel2)) { Window.Title = "Intersects"; } What is causing this?

  Read the article

• Ubuntu sound volume is 40% lower than in Windows

  - by ncomx

  I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

  Read the article

• Altq limits not being applied to UDP transfers

  - by overkordbaever

  I have a OpenBSD server acting as a router/firewall with yhr packet filter ruleset shown below, a linux server, and a linux client. When transferring files (using netcat) by TCP, the limits are applied (for example the 100mbit limit in the example), though when transferring data by UDP, the limits aren't applied; the file always takes the same amount of time no matter the queue bandwidth limit I set (I can even turn off the queues completely, and will still get the same result). Why aren't the queuing rules applied to UDP packages? The rules used: #queue rules altq on { $int_if, $ext_if } cbq bandwidth 100Mb queue { def, low } queue def bandwidth 0Mb cbq(default) queue low bandwidth 100Mb cbq #Passrules test pass out quick from $int_if to $ext_if queue low pass in quick from $ext_if to $int_if queue low pass out quick from $ext_if to $int_if queue low pass in quick from $int_if to $ext_if queue low I suppose this may be related a question I've previously asked, though since it's more of a separate question, I suppose a separate question should be used for this

  Read the article

• Problems executing check_mysql plugin

  - by Brian

  I'm attempting to test out the check_mysql plugin for Nagios using the command line. It works great when I'm just checking localhost but when I try to specify a different server (using the -H argument) I keep getting the following error message: CRITICAL - Unable to connect to mysql://nagios_user@{remoteServerHostname}/ - Access denied for user 'nagios_user'@'{localServerHostName}' (using password: YES) It looks like it's trying to connect to the database using the localhost server even though I've specified a different host name. I've already set up this user on the remote database and they have correct permissions. I'm just trying to figure out why the script keeps inserting the localhost server name instead of the remote one.

  Read the article

• What is the simplest and fastest way to transfer large file through a Windows network?

  - by Sake

  I have a Window Server 2000 machine running MS SQL Server that stores over 20GB of data. The database is backed-up every day to the second harddrive. I want to transfer those backup files to another computer to build another test server and for recovery practicing. (the backup never actually got restored for almost 5 years. Don't tell my boss about that!) I have trouble transfering that huge file through the network. I've tried plain network copy, apache download, and ftp. Any method I tried end up failing when the amount of data transfered reach 2GB. The last time that I successfully transfered the file, it was through a usb attached external harddrive. But I want to perform this task routinely and preferably automatically. Wonder what is the most pragmatic approach for this situation ?

  Read the article

• SQL server 2000 reporting bad values to ASP.Net Application

  - by Ben

  I have an instance of SQL server 2000 (8.0.2039) with a rather simple table. We recently had users complain about an application I wrote returning bad values for some of the dates in the databse. When I query the table directly via Server Management Studio, it will return the correct values, however the identical queries from my application report the wrong values, but only for a couple of dates. I have been over the code, and it is solid. If the error was in the code, all of the dates reported should be wrong. I have also run the code on an identical test database, and everything is reported properly. I believe the problem may lie in the sql instance itself, which is why I am posting in Server Fault. My question is, has anyone heard of a database reporting bad (incorrect) date values when queried via web application? It should be noted that this particular server was once manually rebuilt after having a cluster clean run on it.

  Read the article

• Can't mount USB devices, shut down etc. as a user

  - by Alok

  I tried gnome3 and gnome3-staging ppas to test running Gnome 3.8. After a while I decided that Gnome 3.8 wasn't for me, so I did a ppa-purge of both the ppas. As described in gnome3-staging ppa page, I also did: $ sudo apt-get purge libpam-systemd $ sudo apt-get install libpam-xdg-support The trouble is, I can't mount my external USB device anymore. When I try to mount it as a user, it fails: $ udisks --mount /dev/sdc1 Mount failed: Not Authorized I am logged in an XFCE session, but the same thing happens in a fallback Gnome session, or from a Unity session. Also, in XFCE, "suspend" and "shut down" menus are grayed out. I can't also open synaptic package manager from XFCE menus (sudo synaptic works). After a lot of searching, it seems like it is a policykit issue. I see the following in my ~/.xsession-errors: (polkit-gnome-authentication-agent-1:5805): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 5805 PID 5805 doesn't exist. If I try to start polkit-dnome-authentication-agent-1 from an xterm, I get the same error (different PID): $ /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 ... (polkit-gnome-authentication-agent-1:15971): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 15971 (the ... lines are warnings from GTK about missing css files etc.). polkitd is running: $ pidof polkitd 1495 Is there something I am missing?

  Read the article

• How to approach scrum task burn down when tasks have multiple peoples involvement?

  - by AgileMan

  In my company, a single task can never be completed by one individual. There is going to be a separate person to QA and Code Review each task. What this means is that each individual will give their estimates, per task, as to how much time it will take to complete. The problem is, how should I approach burn down? If I aggregate the hours together, assume the following estimate: 10 hrs - Dev time 4 hrs - QA 4 hrs - Code Review. Task Estimate = 18hrs At the end of each day I ask that the task be updated with "how much time is left until it is done". However, each person generally just thinks about their part of it. Should they mark the effort remaining, and then ADD the effort estimates to that? How are you guys doing this? UPDATE To help clarify a few things, at my organization each Task within a story requires 3 people. Someone to develop the task. (do unit tests, ect...) A QA specialist to review task (they primarily do integration and regression tests) A Tech lead to do code review. I don't think there is a wrong way or a right way, but this is our way ... and that won't be changing. We work as a team to complete even the smallest level of a story whenever possible. You cannot actually test if something works until it is dev complete, and you cannot review the quality of the code either ... so the best you can do is split things up into small logical slices so that the bare minimum functionality can be tested and reviewed as early into the process as possible. My question to those that work this way would be how to burn down a "task" when they are setup this way. Unless a Task has it's own sub-tasks (which JIRA doesn't allow) ... I'm not sure the best way to accomplish tracking "what's left" on a daily basis.

  Read the article

• iptables: built-in INPUT chain in nat table?

  - by ughmandaem

  I have a Gentoo Linux system running linux 2.6.38-rc8. I also have a machine running Ubuntu with linux 2.6.35-27. I also have a virtual machine running Debian Unstable with linux 2.6.37-2. On the Gentoo and Debian systems I have an INPUT chain built into my nat table in addition to PREROUTING, OUTPUT, and POSTROUTING. On Ubuntu, I only have PREROUTING, OUTPUT, and POSTROUTING. I am able to use this INPUT chain to use SNAT to modify the source of a packet that is destined to the local machine (imagine simulating an incoming spoofed IP to a local application or just to test a virtual host configuration). This is possible with 2 firewall rules on Gentoo and Debian but seemingly not so on Ubuntu. I looked around for documentation on changes to the SNAT target and the INPUT chain of the nat table and I couldn't find anything. Does anyone know if this is a configuration issue or is it something that was just added in more recent versions of linux?

  Read the article

• You don't have permission to access / on this server on centos 5.3

  - by zahid

  hello am using centos 5.3 with kloxo panel everything was fine but last night when i was updating my site i do not know i got first error when i try to access my site script everything is ok www.w3scan.net www.dl4fun.com Forbidden You don't have permission to access / on this server. please help i checked httpd it seems to be ok my httpd.conf #<VirtualHost *:80> # ServerName www.domain.tld # ServerPath /domain # DocumentRoot /home/user/domain # DirectoryIndex index.html index.htm index.shtml default.cgi default.html default.htm #</VirtualHost> i uninstall apache and installed again now i have still now access Index of / i modify apache welcome.conf to remove apache test page help

  Read the article

• Collision detection with non-rectangular images

  - by Adam Smith

  I'm creating a game and I need to detect collisions between a character and some parts of the environment. Since my character's frames are taken from a sprite sheet with a transparent background, I'm wondering how I should go about detecting collisions between a wall and my character only if the colliding parts are non-transparent in both images. I thought about checking only if part of the rectangle the character is in touches the rectangle a tile is in and comparing the alpha channels, but then I have another choice to make... Either I test every single pixel against every single pixel in the other image and if one is true, I detect a collision. That would be terribly ineficient. The other option would be to keep a x,y position of the leftmost, rightmost, etc. non-transparent pixel of each image and compare those instead. The problem with this one might be that, for instance, the character's hand could be above a tile (so it would be in a transparent zone of the tile) but a pixel that is not the rightmost could touch part of the tile without being detected. Another problem would be that in different frames, the rightmost, leftmost, etc. pixels might not be at the same position. Should I not bother with that and just check the collisions on the rectangles? It would be simpler, but I'm afraid people.will feel that there are collisions sometimes that shouldn't happen.

  Read the article

• Windows Embedded Compact 7

  - by Valter Minute

  This will be the official name of the new release of Windows CE. Windows Embedded Compact 7 is available as a public CTP and it already supports a wide range of CPUs and both the device emulator and VirtualPC emulated environments. So I’ll have to learn a new (and longer) name for my favorite OS… but I (and all my two readers!) will be able to test it as soon as the download from connect web site completes (I'm sorry for my readers, but you'll have to download it by yourselves). Here’s a link for the download (it's free but you’ll have to register on connect with a valid LiveId): https://connect.microsoft.com/windowsembeddedce Remember that this is still a beta (or “Community Technology Preview” if you speak marketing language) and so it’s better to not install it on your main development PC (or, at least, backup everything before installation) and that the features and performances you’ll get from this beta may not be the same ones of the final release of the OS. You can discover the new features of Windows Embedded Compact on the new “official” webpage on microsoft website: http://www.microsoft.com/windowsembedded/en-us/products/windowsce/compact7.mspx or on Olivier’s blog: http://blogs.msdn.com/b/obloch/archive/2010/06/01/windows-embedded-compact-7-announced-and-public-ctp-available.aspx I hope to be able to post some interesting content about Windows Embedded Compact 7 soon (and maybe be able to shorten it’s name in CE7 in my blog posts, when I'll ensure that both my readers are not worketing for Microsoft's marketing department …). Technorati Tags: "Windows Embedded Compact 7"

  Read the article

• Is FreeBSD better than CentOS for firing 40k concurrent connections (for Jmeter)?

  - by blacklotus

  Hi, I am trying to run Jmeter to simulate 40k concurrent users and stress test a particular system. Putting aside the possibility that Jmeter may not be able to push such a high number (although I have read that it is at least possible to handle 10k concurrent threads on a very powerful machine), is FreeBSD a better OS as compare to CentOS to be used for my Jmeter machine? Reason for asking this is that, I have found articles on FreeBSD for tuning and optimizing for maximum outbound connections, but seem to have little luck with CentOS. Personally however, I am more familiar with CentOS and would like to stick with it if possible. Any input is greatly appreciated!

  Read the article

• Hurry! See the uncensored OOW videos before they get edited!

  - by rickramsey

  source Uploaded so far: Which Oracle Solaris 11 Technologies Have Sysadmins Been Using Most? Director's Cut - Uncensored - Markus Flierl, VP Solaris Core Engineering, describes how Oracle Solaris 11 customers are taking advantage of the Image Packaging System and the snapshot capability of ZFS to run more frequent updates of not only the OS, but also the applications (agile development, anyone?), and how they're using the network virtualization capabilities in Oracle Solaris 11 to isolate applications and manage workloads on the cloud. Watch How Hybrid Columnar Compression Saves Storage Space Director's Cut - Uncensored - Art Licht shows how hyprid columnar compression (HCC) compresses data 30x without slowing down other queries that the database is performing. First he shows what happens when he runs database queries without HCC, then he shows what happens when he runs the queries with HCC. Security Capabilities and Design in Oracle Solaris 11 Director's Cut - Uncensored - Compliance reporting. Extended policy. Immutable zones. Three of the best minds in Oracle Solaris security explain what they are, what customers are doing with them, and how they were engineered. Filmed at Oracle Open World 2012. Why DTrace and Ksplice Have Made Oracle Linux 6 Popular with Sysadmins Use the DTrace scripts you wrote for Oracle Solaris on Oracle Linux without modification. Wim Coekaerts, VP of Engineering for Oracle Linux, explains how this capability of DTrace, the zero downtime updates enabled by KSplice, and other performance and stability enhancements have made Oracle Linux 6 popular with sysadmins. Why Solaris 11 Is Being Adopted Faster Than Solaris 10 Sneak Preview - Uncut Version - Lynn Rohrer, Director of Oracle Solaris Product Management explains why customers are adopting Oracle Solaris 11 at a faster rate than Oracle Solaris 10, and proves why you should never challenge a Montana woman to a test of strength. What Forsythe Corp Is Helping Its Customers Do With Oracle Solaris 11 Director's Cut - Unedited - Lee Diamante, Solutions Architect for Forsythe Corp, an Oracle Solaris Partner, explains why Forsythe has been recommending Oracle Solaris to its customers, and what those customers have been doing with it. Lots more to come ... - Rick Website Newsletter Facebook Twitter

  Read the article

• how can i use apache log files to recreate usage scenario

  - by daigorocub

  Recently i installed a website that had too many requests and it was too slow. Many improvements have been made to the web site code and we've also bought a new server. I want to test the new server with exactly the same requests that made the old server slow. After that, i will double the requests, make new tests and so on. These requests are logged in the apache log files. So, I can parse those files and make some kind of script to make the same requests. Of course, in this case, the requests will be made only by my computer against the server, but hey, better than nothing. Questions: - is there some app that does this already? - would you use wget? ab? python script? Thanks!

  Read the article

• Generating my own SQL Server SSL Certificate

  - by Haoest

  I hear it's possible to make myself a test certificate with MakeCert from Windows SDK, but the beast is 1.5 GB, which I feel reluctant to download for a half-megabyte program. I do, however, have IIS Resource kit with me, which has selfssl to generate certificate for IIS. Will that work for SQL Server? Is there a more convenient way of generating myself an SSL certificate for SQL Server use? I even tried using CREATE CERTIFICATE with TSQL within SQL Server and then have it BACKUP into a file, but with no success. I must have confused the concept of certificate fundamentally. Any advice?

  Read the article

• Scripting language for filling out web form

  - by ityler22

  I have a job as an intern at a technology company, I was given the unfortunate job of performing some data entry into our web management system. The information entered into the web form is stored in a MySQL DB. Upon receiving the data I realized I would have to submit this online form about 1000 different times all consisting of about 10 different text fields / check boxes per form. (So in other words, would be completely mind numbing and be a ridiculous waste of time and resources, or so I thought...) Having used databases a good bit prior to this, my immediate reaction was to just write a short MySQL script to bulk import all of the data, especially since it was already presented to me in an excel spreadsheet ready to go. Thought it may have been some sort of a test since it seemed too obvious. I wrote the script which consisted of about 10 lines of code but was then informed I couldn't be trusted with MySQL Admin privileges to run said script. So my next thought would be to write a script to just enter the information through the web form (Which will take ten times longer but it's what I have to) Being unfamiliar with scripting of this nature (seems like I would need something similar to a bot, but the good kind) I was unsure of how to proceed to do this. Is there a preferred language to use to enter the data i have into the web form I do have access to? I'm not particularly looking for this to be done for me by any means just a nice point in the right direction as far as what scripting language to use and how to pair that with the data I have that needs to be entered. Thanks for the help/ valuable input! EDIT: Is there a way to perform this using perl without having access to place any files on the server? Would I be able to run some Javascript loops to pull the data out of .csv or just a .txt format with line delimiters and insert it into the web form?

  Read the article

• How do I throttle a command in a terminal window?

  - by To Do

  I needed to run convert with a lot of images at the same time. The command took quite a while but this doesn't bother me. The issue is that this command rendered my computer unusable while the command was running (for about 15 minutes). So is it possible to throttle the command by limiting resources (processor and memory) to the command, directly from the command line? This can only work if I add something to the same line before pressing Enter because once I start the process the computer slows so much that it is impossible for example to switch to "System monitor" and reduce priority. Edit: top and iotop results I managed to run top and sudo iotop >iotop.txt while doing one of these convert operations. (The iotop.txt file produced is difficult to read) Results of top: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 14275 username 20 0 4043m 3.0g 1448 D 7.0 80.4 0:16.45 convert Results of iotop: [?1049h[1;24r(B[m[4l[?7h[?1h=[39;49m[?25l[39;49m(B[m[H[2JTotal DISK READ: 1269.04 K/s | Total DISK WRITE:[59G0.00 B/s (B[0;7m TID PRIO USER DISK READ DISK WRITE SWAPIN(B[0;1;7m IO(B[0;7m COMMAND [3;2H(B[m2516 be/4 username 350.08 K/s 0.00 B/s 0.00 % 0.00 % zeitgeist-datahub 7394 be/4 username 568.88 K/s 0.00 B/s 77.41 % 0.00 % --rendere~.530483991[5;1H14275 idle username 350.08 K/s 0.00 B/s 37.49 % 0.00 % convert S~f test.pdf[6;2H2048 be/4 root[6;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % [kworker/3:2] [5G1 be/4 root[7;24H0.00 B/s 0.00 B/s 0.00 % 0.00 % init Furthermore, even after the process ends, the computer does not return to the previous performance. I found a way around this by running sudo swapoff -a followed by sudo swapon -a

  Read the article

• Need disc image help pronto!

  - by data

  I recently got a job as a junior network administrator. Last week the senior admins did their yearly reinstall of server 2003, exchange, drivers etc on the main server. I've been asked to back up the disc so that next year they can just copy over the pre-made image. What tools can i use to achieve both the creation of the entire servers HDD image and loading it back on (id like to test it in the sandbox.) To impress them, a program that is free is preferable. And maybe a tool that can do it all from booting the program off of a USB drive.

  Read the article

• Subversion for web designer: repository on a network share and ftp to the live server?

  - by ceatus

  My configuration: htdocs on a windows network share (z:) web developers check out with dreamweaver modify and check in back to the drive z LAMP running on a Ubuntu server virtualized on Hyper-V with apache that point on the z drive for dev in order to test the websites Upload by FTP on the live server Now: I need multiple access to the repository, keep them on a network shares and we manage about 200 websites. All the web developers, administrators and IT need to access to the share. I found out that creating a svn server is the best way for me, so I created it on a Ubuntu Server which is virtualized on Hyper-V. Right now I have the repos local on the Ubuntu Server but I'd like them on my network drive and I'd like to have a post-commit, if possible, in order to ftp directly on my live server. Do you guys think that a WebDav solution would be better? Thanks in advance Angelo

  Read the article

• Use DOS batch to move all files up 1 directory

  - by Harminoff

  I have created a batch file to be executed through the right-click menu in Win7. When I right-click on a folder, I would like the batch file to move all files (excluding folders) up 1 directory. I have this so far: PUSHHD %1 MOVE "%1\*.*" ..\ This seems to work as long as the folder I'm moving files from doesn't have any spaces. When the folder does have spaces, I get an error message: "The syntax of the command is incorrect." So my batch works on a folder titled PULLTEST but not on a folder titled PULL TEST. Again, I don't need it to move folders, just files. And I would like it to work in any directory on any drive. There will be no specific directories that I will be working in. It will be random. Below is the registry file I made if needed for reference. Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\Directory\shell\PullFiles] @="PullFilesUP" [HKEY_CLASSES_ROOT\Directory\shell\PullFiles\command] @="\"C:\\Program Files\\MyBatchs\\PullFiles.bat\" \"%1\""

  Read the article

• Frustrated with MythTV 0.26

  - by Mike

  I've been using MythTV for a while now. Until a hardware crash I had a 0.25 box running without problems. Had to get new hardware and am now in the process of setting up 0.26. Every time I pick a menu option, it hangs for 1 minute. Every time I try to start the backend, same thing. I pick a new theme in the frontend, but it never gets used. I try to test audio, but all I get is static (from the proper channels though). I've setup the storage groups in the backend and put a video in /storage/videos but the front end won't see it when I scan for changes. I make changes in the front end configuration and they don't get saved (or get lost randomly 2-3 reloads later). Obviously there is something I am doing catastrophically wrong, but I have no idea what. Are the storage groups not working yet? Maybe I need to delete all the storage group entries and just use the front end override to set the path? I'm currently using lvm across 3 hard disks, and this has worked well for me in the past. I'd like to use storage groups, but frankly I don't see them working yet at all - especially not for videos (which is what we watch 99% of the time). Anyone have any suggestions for me to try before I just call 0.26 bad names and wipe the system?

  Read the article

< Previous Page | 581 582 583 584 585 586 587 588 589 590 591 592  | Next Page >