query output - Page 586

KVM/Libvirt bridged/routed networking not working on newer guest kernels

- by SharkWipf

I have a dedicated server running Debian 6, with Libvirt (0.9.11.3) and Qemu-KVM (qemu-kvm-1.0+dfsg-11, Debian). I am having a problem getting bridged/routed networking to work in KVM guests with newer kernels (2.6.38). NATted networking works fine though. Older kernels work perfectly fine as well. The host kernel is at version 3.2.0-2-amd64, the problem was also there on an older host kernel. The contents of the host's /etc/network/interfaces (ip removed): # Loopback device: auto lo iface lo inet loopback # bridge auto br0 iface br0 inet static address 176.9.xx.xx broadcast 176.9.xx.xx netmask 255.255.255.224 gateway 176.9.xx.xx pointopoint 176.9.xx.xx bridge_ports eth0 bridge_stp off bridge_maxwait 0 bridge_fd 0 up route add -host 176.9.xx.xx dev br0 # VM IP post-up mii-tool -F 100baseTx-FD br0 # default route to access subnet up route add -net 176.9.xx.xx netmask 255.255.255.224 gw 176.9.xx.xx br0 The output of ifconfig -a on the host: br0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 inet addr:176.9.xx.xx Bcast:176.9.xx.xx Mask:255.255.255.224 inet6 addr: fe80::5604:a6ff:fe8a:6613/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20216729 errors:0 dropped:0 overruns:0 frame:0 TX packets:19962220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14144528601 (13.1 GiB) TX bytes:7990702656 (7.4 GiB) eth0 Link encap:Ethernet HWaddr 54:04:a6:8a:66:13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26991788 errors:0 dropped:12066 overruns:0 frame:0 TX packets:19737261 errors:270082 dropped:0 overruns:0 carrier:270082 collisions:1686317 txqueuelen:1000 RX bytes:15459970915 (14.3 GiB) TX bytes:6661808415 (6.2 GiB) Interrupt:17 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6240133 errors:0 dropped:0 overruns:0 frame:0 TX packets:6240133 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6081956230 (5.6 GiB) TX bytes:6081956230 (5.6 GiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:79:e4:5a inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:225016 errors:0 dropped:0 overruns:0 frame:0 TX packets:412958 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16284276 (15.5 MiB) TX bytes:687827984 (655.9 MiB) virbr0-nic Link encap:Ethernet HWaddr 52:54:00:79:e4:5a BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vnet0 Link encap:Ethernet HWaddr fe:54:00:93:4e:68 inet6 addr: fe80::fc54:ff:fe93:4e68/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:607670 errors:0 dropped:0 overruns:0 frame:0 TX packets:5932089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:83574773 (79.7 MiB) TX bytes:1092482370 (1.0 GiB) vnet1 Link encap:Ethernet HWaddr fe:54:00:ed:6a:43 inet6 addr: fe80::fc54:ff:feed:6a43/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:922132 errors:0 dropped:0 overruns:0 frame:0 TX packets:6342375 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:251091242 (239.4 MiB) TX bytes:1629079567 (1.5 GiB) vnet2 Link encap:Ethernet HWaddr fe:54:00:0d:cb:3d inet6 addr: fe80::fc54:ff:fe0d:cb3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9461 errors:0 dropped:0 overruns:0 frame:0 TX packets:665189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4990275 (4.7 MiB) TX bytes:49229647 (46.9 MiB) vnet3 Link encap:Ethernet HWaddr fe:54:cd:83:eb:aa inet6 addr: fe80::fc54:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1649 errors:0 dropped:0 overruns:0 frame:0 TX packets:12177 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:77233 (75.4 KiB) TX bytes:2127934 (2.0 MiB) The guest's /etc/network/interfaces, in this case running Ubuntu 12.04 (ip removed): # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 176.9.xx.xx netmask 255.255.255.248 gateway 176.9.xx.xx # Host IP pointopoint 176.9.xx.xx # Host IP dns-nameservers 8.8.8.8 8.8.4.4 The output of ifconfig -a on the guest: eth0 Link encap:Ethernet HWaddr 52:54:cd:83:eb:aa inet addr:176.9.xx.xx Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: fe80::5054:cdff:fe83:ebaa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14190 errors:0 dropped:0 overruns:0 frame:0 TX packets:1768 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2614642 (2.6 MB) TX bytes:82700 (82.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:954 errors:0 dropped:0 overruns:0 frame:0 TX packets:954 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:176679 (176.6 KB) TX bytes:176679 (176.6 KB) Output of ping -c4 on the guest: PING google.nl (173.194.35.151) 56(84) bytes of data. 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=1 ttl=55 time=14.7 ms From static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx): icmp_seq=2 Redirect Host(New nexthop: static.161.82.9.176.clients.your-server.de (176.9.82.161)) 64 bytes from muc03s01-in-f23.1e100.net (173.194.35.151): icmp_req=2 ttl=55 time=15.1 ms From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=3 Destination Host Unreachable From static.198.170.9.176.clients.your-server.de (176.9.170.198) icmp_seq=4 Destination Host Unreachable --- google.nl ping statistics --- 4 packets transmitted, 2 received, +2 errors, 50% packet loss, time 3002ms rtt min/avg/max/mdev = 14.797/14.983/15.170/0.223 ms, pipe 2 The static.174.82.xx.xx.clients.your-server.de (176.9.xx.xx) is the host's IP. I have encountered this problem with every guest OS I've tried, that being Fedora, Ubuntu (server/desktop) and Debian with an upgraded kernel. I've also tried compiling the guest kernel myself, to no avail. I have no problem with recompiling a kernel, though the host cannot afford any downtime. Any ideas on this problem are very welcome. EDIT: I can ping the host from inside the guest.

Read the article

C#: Why Decorate When You Can Intercept

- by James Michael Hare

We've all heard of the old Decorator Design Pattern (here) or used it at one time or another either directly or indirectly. A decorator is a class that wraps a given abstract class or interface and presents the same (or a superset) public interface but "decorated" with additional functionality. As a really simplistic example, consider the System.IO.BufferedStream, it itself is a descendent of System.IO.Stream and wraps the given stream with buffering logic while still presenting System.IO.Stream's public interface: 1: Stream buffStream = new BufferedStream(rawStream); Now, let's take a look at a custom-code example. Let's say that we have a class in our data access layer that retrieves a list of products from a database: 1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: ... 5: 6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: var results = new List<Product>(); 10: 11: // must create the connection 12: using (var con = _factory.CreateConnection()) 13: { 14: con.ConnectionString = _productsConnectionString; 15: con.Open(); 16: 17: // create the command 18: using (var cmd = _factory.CreateCommand()) 19: { 20: cmd.Connection = con; 21: cmd.CommandText = _getAllProductsStoredProc; 22: cmd.CommandType = CommandType.StoredProcedure; 23: 24: // get a reader and pass back all results 25: using (var reader = cmd.ExecuteReader()) 26: { 27: while(reader.Read()) 28: { 29: results.Add(new Product 30: { 31: Name = reader["product_name"].ToString(), 32: ... 33: }); 34: } 35: } 36: } 37: } 38: 39: return results; 40: } 41: } Yes, you could use EF or any myriad other choices for this sort of thing, but the germaine point is that you have some operation that takes a non-trivial amount of time. What if, during the production day I notice that my application is performing slowly and I want to see how much of that slowness is in the query versus my code. Well, I could easily wrap the logic block in a System.Diagnostics.Stopwatch and log the results to log4net or other logging flavor of choice: 1: // a class that handles our CRUD operations for products 2: public class ProductDao 3: { 4: private static readonly ILog _log = LogManager.GetLogger(typeof(ProductDao)); 5: ... 6: 7: // a method that would retrieve all available products 8: public IEnumerable<Product> GetAvailableProducts() 9: { 10: var results = new List<Product>(); 11: var timer = Stopwatch.StartNew(); 12: 13: // must create the connection 14: using (var con = _factory.CreateConnection()) 15: { 16: con.ConnectionString = _productsConnectionString; 17: 18: // and all that other DB code... 19: ... 20: } 21: 22: timer.Stop(); 23: 24: if (timer.ElapsedMilliseconds > 5000) 25: { 26: _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 27: timer.ElapsedMillseconds); 28: } 29: 30: return results; 31: } 32: } In my eye, this is very ugly. It violates Single Responsibility Principle (SRP), which says that a class should only ever have one responsibility, where responsibility is often defined as a reason to change. This class (and in particular this method) has two reasons to change: If the method of retrieving products changes. If the method of logging changes. Well, we could “simplify” this using the Decorator Design Pattern (here). If we followed the pattern to the letter, we'd need to create a base decorator that implements the DAOs public interface and forwards to the wrapped instance. So let's assume we break out the ProductDAO interface into IProductDAO using your refactoring tool of choice (Resharper is great for this). Now, ProductDao will implement IProductDao and get rid of all logging logic: 1: public class ProductDao : IProductDao 2: { 3: // this reverts back to original version except for the interface added 4: } 5: And we create the base Decorator that also implements the interface and forwards all calls: 1: public class ProductDaoDecorator : IProductDao 2: { 3: private readonly IProductDao _wrappedDao; 4: 5: // constructor takes the dao to wrap 6: public ProductDaoDecorator(IProductDao wrappedDao) 7: { 8: _wrappedDao = wrappedDao; 9: } 10: 11: ... 12: 13: // and then all methods just forward their calls 14: public IEnumerable<Product> GetAvailableProducts() 15: { 16: return _wrappedDao.GetAvailableProducts(); 17: } 18: } This defines our base decorator, then we can create decorators that add items of interest, and for any methods we don't decorate, we'll get the default behavior which just forwards the call to the wrapper in the base decorator: 1: public class TimedThresholdProductDaoDecorator : ProductDaoDecorator 2: { 3: private static readonly ILog _log = LogManager.GetLogger(typeof(TimedThresholdProductDaoDecorator)); 4: 5: public TimedThresholdProductDaoDecorator(IProductDao wrappedDao) : 6: base(wrappedDao) 7: { 8: } 9: 10: ... 11: 12: public IEnumerable<Product> GetAvailableProducts() 13: { 14: var timer = Stopwatch.StartNew(); 15: 16: var results = _wrapped.GetAvailableProducts(); 17: 18: timer.Stop(); 19: 20: if (timer.ElapsedMilliseconds > 5000) 21: { 22: _log.WarnFormat("Long query in GetAvailableProducts() took {0} ms", 23: timer.ElapsedMillseconds); 24: } 25: 26: return results; 27: } 28: } Well, it's a bit better. Now the logging is in its own class, and the database logic is in its own class. But we've essentially multiplied the number of classes. We now have 3 classes and one interface! Now if you want to do that same logging decorating on all your DAOs, imagine the code bloat! Sure, you can simplify and avoid creating the base decorator, or chuck it all and just inherit directly. But regardless all of these have the problem of tying the logging logic into the code itself. Enter the Interceptors. Things like this to me are a perfect example of when it's good to write an Interceptor using your class library of choice. Sure, you could design your own perfectly generic decorator with delegates and all that, but personally I'm a big fan of Castle's Dynamic Proxy (here) which is actually used by many projects including Moq. What DynamicProxy allows you to do is intercept calls into any object by wrapping it with a proxy on the fly that intercepts the method and allows you to add functionality. Essentially, the code would now look like this using DynamicProxy: 1: // Note: I like hiding DynamicProxy behind the scenes so users 2: // don't have to explicitly add reference to Castle's libraries. 3: public static class TimeThresholdInterceptor 4: { 5: // Our logging handle 6: private static readonly ILog _log = LogManager.GetLogger(typeof(TimeThresholdInterceptor)); 7: 8: // Handle to Castle's proxy generator 9: private static readonly ProxyGenerator _generator = new ProxyGenerator(); 10: 11: // generic form for those who prefer it 12: public static object Create<TInterface>(object target, TimeSpan threshold) 13: { 14: return Create(typeof(TInterface), target, threshold); 15: } 16: 17: // Form that uses type instead 18: public static object Create(Type interfaceType, object target, TimeSpan threshold) 19: { 20: return _generator.CreateInterfaceProxyWithTarget(interfaceType, target, 21: new TimedThreshold(threshold, level)); 22: } 23: 24: // The interceptor that is created to intercept the interface calls. 25: // Hidden as a private inner class so not exposing Castle libraries. 26: private class TimedThreshold : IInterceptor 27: { 28: // The threshold as a positive timespan that triggers a log message. 29: private readonly TimeSpan _threshold; 30: 31: // interceptor constructor 32: public TimedThreshold(TimeSpan threshold) 33: { 34: _threshold = threshold; 35: } 36: 37: // Intercept functor for each method invokation 38: public void Intercept(IInvocation invocation) 39: { 40: // time the method invocation 41: var timer = Stopwatch.StartNew(); 42: 43: // the Castle magic that tells the method to go ahead 44: invocation.Proceed(); 45: 46: timer.Stop(); 47: 48: // check if threshold is exceeded 49: if (timer.Elapsed > _threshold) 50: { 51: _log.WarnFormat("Long execution in {0} took {1} ms", 52: invocation.Method.Name, 53: timer.ElapsedMillseconds); 54: } 55: } 56: } 57: } Yes, it's a bit longer, but notice that: This class ONLY deals with logging long method calls, no DAO interface leftovers. This class can be used to time ANY class that has an interface or virtual methods. Personally, I like to wrap and hide the usage of DynamicProxy and IInterceptor so that anyone who uses this class doesn't need to know to add a Castle library reference. As far as they are concerned, they're using my interceptor. If I change to a new library if a better one comes along, they're insulated. Now, all we have to do to use this is to tell it to wrap our ProductDao and it does the rest: 1: // wraps a new ProductDao with a timing interceptor with a threshold of 5 seconds 2: IProductDao dao = TimeThresholdInterceptor.Create<IProductDao>(new ProductDao(), 5000); Automatic decoration of all methods! You can even refine the proxy so that it only intercepts certain methods. This is ideal for so many things. These are just some of the interceptors we've dreamed up and use: Log parameters and returns of methods to XML for auditing. Block invocations to methods and return default value (stubbing). Throw exception if certain methods are called (good for blocking access to deprecated methods). Log entrance and exit of a method and the duration. Log a message if a method takes more than a given time threshold to execute. Whether you use DynamicProxy or some other technology, I hope you see the benefits this adds. Does it completely eliminate all need for the Decorator pattern? No, there may still be cases where you want to decorate a particular class with functionality that doesn't apply to the world at large. But for all those cases where you are using Decorator to add functionality that's truly generic. I strongly suggest you give this a try!

Read the article

Visual Studio 2010 Productivity Tips and Tricks-Part 2: Key Shortcuts

- by ToStringTheory

Ask anyone that knows me, and they will confirm that I hate the mouse. This isn’t because I deny affection to objects that don’t look like their mammalian-named self, but rather for a much more simple and not-insane reason: I have terrible eyesight. Introduction Thanks to a degenerative eye disease known as Choroideremia, I have learned to rely more on the keyboard which I can feel digital/static positions of keys relative to my fingers, than the much more analog/random position of the mouse. Now, I would like to share some of the keyboard shortcuts with you now, as I believe that they not only increase my productivity, but yours as well once you know them (if you don’t already of course)... I share one of my biggest tips for productivity in the conclusion at the end. Visual Studio Key Shortcuts Global Editor Shortcuts These are shortcuts that are available from almost any application running in Windows, however are many times forgotten. Shortcut Action Visual Studio 2010 Functionality Ctrl + X Cut This shortcut works without a selection. If nothing is selected, the entire line that the caret is on is cut from the editor. Ctrl + C Copy This shortcut works without a selection. If nothing is selected, the entire line that the caret is on is copied from the editor. Ctrl + V Paste If you copied an entire line by the method above, the data is pasted in the line above the current caret line. Ctrl + Shift + V Next Clipboard Element Cut/Copy multiple things, and then hit this combo repeatedly to switch to the next clipboard item when pasting. Ctrl + Backspace Delete Previous Will delete the previous word from the editor directly before the caret. If anything is selected, will just delete that. Ctrl + Del Delete Next Word Will delete the next word/space from the editor directly after the caret. If anything is selected, will just delete that. Shift + Del Delete Focused Line Will delete the line from the editor that the caret is on. If something is selected, will just delete that. Ctrl + ? or Ctrl + ? Left/Right by Word This will move the caret left or right by word or special character boundary. Holding Shift will also select the word. Ctrl + F Quick Find Either the Quick Find panel, or the search bar if you have the Productivity Power Tools installed. Ctrl + Shift + F Find in Solution Opens up the 'Find in Files' window, allowing you to search your solution, as well as using regex for pattern matching. F2 Rename File... While not debugging, selecting a file in the solution explorer\navigator and pressing F2 allows you to rename the selected file. Global Application Shortcuts These are shortcuts that are available from almost any application running in Windows, however are many times forgotten... Again... Shortcut Action Visual Studio 2010 Functionality Ctrl + N New File dialog Opens up the 'New File' dialog to add a new file to the current directory in the Solution\Project. Ctrl + O Open File dialog Opens up the 'Open File' dialog to open a file in the editor, not necessarily in the solution. Ctrl + S Save File dialog Saves the currently focused editor tab back to your HDD/SSD. Ctrl + Shift + S Save All... Quickly save all open/edited documents back to your disk. Ctrl + Tab Switch Panel\Tab Tapping this combo switches between tabs quickly. Holding down Ctrl when hitting tab will bring up a chooser window. Building Shortcuts These are shortcuts that are focused on building and running a solution. These are not usable when the IDE is in Debug mode, as the shortcut changes by context. Shortcut Action Visual Studio 2010 Functionality Ctrl + Shift + B Build Solution Starts a build process on the solution according to the current build configuration manager settings. Ctrl + Break Cancel a Building Solution Will cancel a build operation currently in progress. Good for long running builds when you think of one last change. F5 Start Debugging Will build the solution if needed and launch debugging according to the current configuration manager settings. Ctrl + F5 Start Without Debugger Will build the solution if needed and launch the startup project without attaching a debugger. Debugging Shortcuts These are shortcuts that are used when debugging a solution. Shortcut Action Visual Studio 2010 Functionality F5 Continue Execution Continues execution of code until the next breakpoint. Ctrl + Alt + Break Pause Execution Pauses the program execution. Shift + F5 Stop Debugging Stops the current debugging session. NOTE: Web apps will still continue processing after stopping the debugger. Keep this in mind if working on code such as credit card processing. Ctrl + Shift + F5 Restart Debugging Stops the current debugging session and restarts the debugging session from the beginning. F9 Place Breakpoint Toggles/Places a breakpoint in the editor on the current line. Set a breakpoint in condensed code by highlighting the statement first. F10 Step Over Statement When debugging, executes all code in methods/properties on the current line until the next line. F11 Step Into Statement When debugging, steps into a method call so you can walk through the code executed there (if available). Ctrl + Alt + I Immediate Window Open the Immediate Window to execute commands when execution is paused. Navigation Shortcuts These are shortcuts that are used for navigating in the IDE or editor panel. Shortcut Action Visual Studio 2010 Functionality F4 Properties Panel Opens the properties panel for the selected item in the editor/designer/solution navigator (context driven). F12 Go to Definition Press F12 with the caret on a member to navigate to its declaration. With the Productivity tools, Ctrl + Click works too. Ctrl + K Ctrl + T View Call Hierarchy View the call hierarchy of the member the caret is on. Great for going through n-tier solutions and interface implementations! Ctrl + Alt + B Breakpoint Window View the breakpoint window to manage breakpoints and their advanced options. Allows easy toggling of breakpoints. Ctrl + Alt + L Solution Navigator Open the solution explorer panel. Ctrl + Alt + O Output Window View the output window to see build\general output from Visual Studio. Ctrl + Alt + Enter Live Web Preview Only available with the Web Essential plugin. Launches the auto-updating Preview panel. Testing Shortcuts These are shortcuts that are used for running tests in the IDE. Please note, Visual Studio 2010 is all about context. If your caret is within a test method when you use one of these combinations, the combination will apply to that test. If your caret is within a test class, it will apply to that class. If the caret is outside of a test class, it will apply to all tests. Shortcut Action Visual Studio 2010 Functionality Ctrl + R T Run Test(s) Run all tests in the current context without a debugger attached. Breakpoints will not be stopped on. Ctrl + R Ctrl + T Run Test(s) (Debug) Run all tests in the current context with a debugger attached. This allows you to use breakpoints. Substitute A for T from the preceding combos to run/debug ALL tests in the current context. Substitute Y for T from the preceding combos to run/debug ALL impacted/covering tests for a method in the current context. Advanced Editor Shortcuts These are shortcuts that are used for more advanced editing in the editor window. Shortcut Action Visual Studio 2010 Functionality Shift + Alt + ? Shift + Alt + ? Multiline caret up/down Use this combo to edit multiple lines at once. Not too many uses for it, but once in a blue moon one comes along. Ctrl + Alt + Enter Insert Line Above Inserts a blank line above the line the caret is currently on. No need to be at end or start of line, so no cutting off words/code. Ctrl + K Ctrl + C Comment Selection Comments the current selection out of compilation. Ctrl + K Ctrl + U Uncomment Selection Uncomments the current selection into compilation. Ctrl + K Ctrl + D Format Document Automatically formats the document into a structured layout. Lines up nodes or code into columns intelligently. Alt + ? Alt + ? Code line up/down *Use this combo to move a line of code up or down quickly. Great for small rearrangements of code. *Requires the Productivity Power pack from Microsoft. Conclusion This list is by no means meant to be exhaustive, but these are the shortcuts I use regularly every hour/minute of the day. There are still 100s more in Visual Studio that you can discover through the configuration window, or by tooltips. Something that I started doing months ago seems to have interest in my office.. In my last post, I talked about how I hated a cluttered UI. One of the ways that I aimed to resolve that was by systematically cleaning up the toolbars week by week. First day, I removed ALL icons that I already knew shortcuts to, or would never use them (Undo in a toolbar?!). Then, every week from that point on, I make it a point to remove an icon/two from the toolbar and make an effort to remember its key combination. I gain extra space in the toolbar area, AND become more productive at the same time! I hope that you found this article interesting or at least somewhat informative.. Maybe a shortcut or two you didn't know. I know some of them seem trivial, but I often see people going to the edit menu for Copy/Paste... Thought a refresher might be helpful!

Read the article

CodePlex Daily Summary for Saturday, October 12, 2013

CodePlex Daily Summary for Saturday, October 12, 2013Popular ReleasesTerrariViewer: TerrariViewer v7 [Terraria Inventory Editor]: This is a complete overhaul but has the same core style. I hope you enjoy it. This version is compatible with 1.2.0.3 Please send issues to my Twitter or https://github.com/TJChap2840WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.6.maint: I think this covers all of the issues. new additions: fixed the thumbnail problem for backgrounds. general clean up and error checking. need to get this put through the wringer and all feedback is welcome.Free language translator and file converter: Free Language Translator 3.4: fixe for new version look up.MoreTerra (Terraria World Viewer): MoreTerra 1.11.3: =========== =New Features= =========== New Markers added for Plantera's Bulb, Heart Fruits and Gold Cache. Markers now correctly display for the gems found in rock debris on the floor. =========== =Compatibility= =========== Fixed header changes found in Terraria 1.0.3.1C# Intellisense for Notepad++: Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.Generic Unit of Work and Repositories Framework: v2.0: Async methods for Repostiories - Ivan (@ifarkas) OData Async - Ivan (@ifarkas) Glimpse MVC4 workig with MVC5 Glimpse EF6 Northwind.Repostiory Project (layer) best practices for extending the Repositories Northwind.Services Project (layer), best practices for implementing business facade Live Demo: http://longle.azurewebsites.net/Spa/Product#/list Documentation: http://blog.longle.net/2013/10/09/upgrading-to-async-with-entity-framework-mvc-odata-asyncentitysetcontroller-kendo-ui-gli...Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...Ghostscript.NET: Ghostscript.NET v.1.1.1.: v.1.1.1. fixed problem in GhostscriptRasterizer and GhostscriptViewer when MediaBox contains negative llx or lly values. (problem reported by "Prasenjit Das"). added GhostscriptPngDevice, a friendly output device class with all png devices related switches. (GhostscriptPngDevice supports: png16m, pngalpha, pnggray, png256, png16, pngmono, pngmonod). added GhostscriptJpegDevice, a friendly output device class with all jpeg devices related switches. (GhostscriptJpegDevice supports: jpeg, jp...(Party) DJ Player: DJP.124.12: 124.12 (Feature implementation completed): Changed datatype of HistoryDateInfo from string to DateTime New: HistoryDateInfoConverter for the listbox Improved: HistoryDateInfoDeleter, HistoryDateInfoLoader, HistoryDateInfoAsynchronizer, HistoryItemLoader, HistoryItemsToHistoryDateInfoConverterSmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...Fast YouTube Downloader: Youtube Downloader 2.1: Youtube Downloader 2.1NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themesGhostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionVidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 5819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Vodigi Open Source Interactive Digital Signage: Vodigi Release 6.0: Please note that we have removed the Kinect support in the Vodigi Player for Version 6.0. We are in the process of building a separate Kinect-enabled Player that will support the next generation Kinect sensor. If you are currently using Kinect with the Vodigi Player, you should not upgrade to Version 6.0. The following enhancements and fixes are included in Vodigi 6.0. Vodigi Administrator - New Interface - Timelines that allow you play video and images on the Main Screen Vodigi Player -...Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.New Projects555984402e86: 555984402e86DropBoxClient: DropBoxClient is a .NET library for interacting with the DropBox Core API. EDB to PST Converter-Fastest Method for Exchange Data conversion: Enstella EDB to PST converter software-smart and valuable solution for instant and safe recovery and conversion of EDB file into PST file.How to build an autodialer with PHP using your MySQL database: As the title says we create an autodialer application, which can call multiple phones simultaneously, in the time we set up.HungNm Test: HungNm TestIBANTools: Strumento da riga di comando per il calcolo massivo dell'IBAN a partire da ABI, CAB, nazione e conto.KGitSvn: This is only a project I set up to test git-svn functionality. It will be deleted when my testing is complete.MailboxLogParser: MailboxLogParser works with Exchange ActiveSync mailbox logs to help support engineers debug issue.MiniScrum: MiniScrum is a small MVC based website to collect notes of what the team members have been up to since our last meeting. pescar2013-shop-purecss: Pescar shop, library PureCssSharePoint User Permission Check: A SP2010 webpart for any site of any site collection. Gives info on permissions of a user for: all folders in all docs, every item in all folders of the librarySocksOverHttp: Welcome free internet, kick away HTTP proxy filter.TypeScript component based framework for enterprise web application.: TypeScript component based framework for enterprise web application.ugsf migration (2007/2010/2013): UGSF ( UserGroup SharePoint France) Documentation and Ressources for SharePoint Migration ( 2007/2010/2013)weiqk's project: only test Windows Imaging Component(WIC) Demo App on WEC2013: A sample application to Demo the Windows Imaging Component(WIC) on WEC2013.WPTrakt: wptrakt

Read the article

Building Simple Workflows in Oozie

- by dan.mcclary

Introduction More often than not, data doesn't come packaged exactly as we'd like it for analysis. Transformation, match-merge operations, and a host of data munging tasks are usually needed before we can extract insights from our Big Data sources. Few people find data munging exciting, but it has to be done. Once we've suffered that boredom, we should take steps to automate the process. We want codify our work into repeatable units and create workflows which we can leverage over and over again without having to write new code. In this article, we'll look at how to use Oozie to create a workflow for the parallel machine learning task I described on Cloudera's site. Hive Actions: Prepping for Pig In my parallel machine learning article, I use data from the National Climatic Data Center to build weather models on a state-by-state basis. NCDC makes the data freely available as gzipped files of day-over-day observations stretching from the 1930s to today. In reading that post, one might get the impression that the data came in a handy, ready-to-model files with convenient delimiters. The truth of it is that I need to perform some parsing and projection on the dataset before it can be modeled. If I get more observations, I'll want to retrain and test those models, which will require more parsing and projection. This is a good opportunity to start building up a workflow with Oozie. I store the data from the NCDC in HDFS and create an external Hive table partitioned by year. This gives me flexibility of Hive's query language when I want it, but let's me put the dataset in a directory of my choosing in case I want to treat the same data with Pig or MapReduce code. CREATE EXTERNAL TABLE IF NOT EXISTS historic_weather(column 1, column2) PARTITIONED BY (yr string) STORED AS ... LOCATION '/user/oracle/weather/historic'; As new weather data comes in from NCDC, I'll need to add partitions to my table. That's an action I should put in the workflow. Similarly, the weather data requires parsing in order to be useful as a set of columns. Because of their long history, the weather data is broken up into fields of specific byte lengths: x bytes for the station ID, y bytes for the dew point, and so on. The delimiting is consistent from year to year, so writing SerDe or a parser for transformation is simple. Once that's done, I want to select columns on which to train, classify certain features, and place the training data in an HDFS directory for my Pig script to access. ALTER TABLE historic_weather ADD IF NOT EXISTS PARTITION (yr='2010') LOCATION '/user/oracle/weather/historic/yr=2011'; INSERT OVERWRITE DIRECTORY '/user/oracle/weather/cleaned_history' SELECT w.stn, w.wban, w.weather_year, w.weather_month, w.weather_day, w.temp, w.dewp, w.weather FROM ( FROM historic_weather SELECT TRANSFORM(...) USING '/path/to/hive/filters/ncdc_parser.py' as stn, wban, weather_year, weather_month, weather_day, temp, dewp, weather ) w; Since I'm going to prepare training directories with at least the same frequency that I add partitions, I should also add that to my workflow. Oozie is going to invoke these Hive actions using what's somewhat obviously referred to as a Hive action. Hive actions amount to Oozie running a script file containing our query language statements, so we can place them in a file called weather_train.hql. Starting Our Workflow Oozie offers two types of jobs: workflows and coordinator jobs. Workflows are straightforward: they define a set of actions to perform as a sequence or directed acyclic graph. Coordinator jobs can take all the same actions of Workflow jobs, but they can be automatically started either periodically or when new data arrives in a specified location. To keep things simple we'll make a workflow job; coordinator jobs simply require another XML file for scheduling. The bare minimum for workflow XML defines a name, a starting point, and an end point: <workflow-app name="WeatherMan" xmlns="uri:oozie:workflow:0.1"> <start to="ParseNCDCData"/> <end name="end"/> </workflow-app> To this we need to add an action, and within that we'll specify the hive parameters Also, keep in mind that actions require <ok> and <error> tags to direct the next action on success or failure. <action name="ParseNCDCData"> <hive xmlns="uri:oozie:hive-action:0.2"> <job-tracker>localhost:8021</job-tracker> <name-node>localhost:8020</name-node> <configuration> <property> <name>oozie.hive.defaults</name> <value>/user/oracle/weather_ooze/hive-default.xml</value> </property> </configuration> <script>ncdc_parse.hql</script> </hive> <ok to="WeatherMan"/> <error to="end"/> </action> There are a couple of things to note here: I have to give the FQDN (or IP) and port of my JobTracker and NameNode. I have to include a hive-default.xml file. I have to include a script file. The hive-default.xml and script file must be stored in HDFS That last point is particularly important. Oozie doesn't make assumptions about where a given workflow is being run. You might submit workflows against different clusters, or have different hive-defaults.xml on different clusters (e.g. MySQL or Postgres-backed metastores). A quick way to ensure that all the assets end up in the right place in HDFS is just to make a working directory locally, build your workflow.xml in it, and copy the assets you'll need to it as you add actions to workflow.xml. At this point, our local directory should contain: workflow.xml hive-defaults.xml (make sure this file contains your metastore connection data) ncdc_parse.hql Adding Pig to the Ooze Adding our Pig script as an action is slightly simpler from an XML standpoint. All we do is add an action to workflow.xml as follows: <action name="WeatherMan"> <pig> <job-tracker>localhost:8021</job-tracker> <name-node>localhost:8020</name-node> <script>weather_train.pig</script> </pig> <ok to="end"/> <error to="end"/> </action> Once we've done this, we'll copy weather_train.pig to our working directory. However, there's a bit of a "gotcha" here. My pig script registers the Weka Jar and a chunk of jython. If those aren't also in HDFS, our action will fail from the outset -- but where do we put them? The Jython script goes into the working directory at the same level as the pig script, because pig attempts to load Jython files in the directory from which the script executes. However, that's not where our Weka jar goes. While Oozie doesn't assume much, it does make an assumption about the Pig classpath. Anything under working_directory/lib gets automatically added to the Pig classpath and no longer requires a REGISTER statement in the script. Anything that uses a REGISTER statement cannot be in the working_directory/lib directory. Instead, it needs to be in a different HDFS directory and attached to the pig action with an <archive> tag. Yes, that's as confusing as you think it is. You can get the exact rules for adding Jars to the distributed cache from Oozie's Pig Cookbook. Making the Workflow Work We've got a workflow defined and have collected all the components we'll need to run. But we can't run anything yet, because we still have to define some properties about the job and submit it to Oozie. We need to start with the job properties, as this is essentially the "request" we'll submit to the Oozie server. In the same working directory, we'll make a file called job.properties as follows: nameNode=hdfs://localhost:8020 jobTracker=localhost:8021 queueName=default weatherRoot=weather_ooze mapreduce.jobtracker.kerberos.principal=foo dfs.namenode.kerberos.principal=foo oozie.libpath=${nameNode}/user/oozie/share/lib oozie.wf.application.path=${nameNode}/user/${user.name}/${weatherRoot} outputDir=weather-ooze While some of the pieces of the properties file are familiar (e.g., JobTracker address), others take a bit of explaining. The first is weatherRoot: this is essentially an environment variable for the script (as are jobTracker and queueName). We're simply using them to simplify the directives for the Oozie job. The oozie.libpath pieces is extremely important. This is a directory in HDFS which holds Oozie's shared libraries: a collection of Jars necessary for invoking Hive, Pig, and other actions. It's a good idea to make sure this has been installed and copied up to HDFS. The last two lines are straightforward: run the application defined by workflow.xml at the application path listed and write the output to the output directory. We're finally ready to submit our job! After all that work we only need to do a few more things: Validate our workflow.xml Copy our working directory to HDFS Submit our job to the Oozie server Run our workflow Let's do them in order. First validate the workflow: oozie validate workflow.xml Next, copy the working directory up to HDFS: hadoop fs -put working_dir /user/oracle/working_dir Now we submit the job to the Oozie server. We need to ensure that we've got the correct URL for the Oozie server, and we need to specify our job.properties file as an argument. oozie job -oozie http://url.to.oozie.server:port_number/ -config /path/to/working_dir/job.properties -submit We've submitted the job, but we don't see any activity on the JobTracker? All I got was this funny bit of output: 14-20120525161321-oozie-oracle This is because submitting a job to Oozie creates an entry for the job and places it in PREP status. What we got back, in essence, is a ticket for our workflow to ride the Oozie train. We're responsible for redeeming our ticket and running the job. oozie -oozie http://url.to.oozie.server:port_number/ -start 14-20120525161321-oozie-oracle Of course, if we really want to run the job from the outset, we can change the "-submit" argument above to "-run." This will prep and run the workflow immediately. Takeaway So, there you have it: the somewhat laborious process of building an Oozie workflow. It's a bit tedious the first time out, but it does present a pair of real benefits to those of us who spend a great deal of time data munging. First, when new data arrives that requires the same processing, we already have the workflow defined and ready to run. Second, as we build up a set of useful action definitions over time, creating new workflows becomes quicker and quicker.

Read the article

Trace flags - TF 1117

- by Damian

I had a session about trace flags this year on the SQL Day 2014 conference that was held in Wroclaw at the end of April. The session topic is important to most of DBA's and the reason I did it was that I sometimes forget about various trace flags :). So I decided to prepare a presentation but I think it is a good idea to write posts about trace flags, too. Let's start then - today I will describe the TF 1117. I assume that we all know how to setup a TF using starting parameters or registry or in the session or on the query level. I will always write if a trace flag is local or global to make sure we know how to use it. Why do we need this trace flag? Let’s create a test database first. This is quite ordinary database as it has two data files (4 MB each) and a log file that has 1MB. The data files are able to expand by 1 MB and the log file grows by 10%: USE [master] GO CREATE DATABASE [TF1117] ON PRIMARY ( NAME = N'TF1117', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117.mdf' , SIZE = 4096KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB ), ( NAME = N'TF1117_1', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117_1.ndf' , SIZE = 4096KB , MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB ) LOG ON ( NAME = N'TF1117_log', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\TF1117_log.ldf' , SIZE = 1024KB , MAXSIZE = 2048GB , FILEGROWTH = 10% ) GO Without the TF 1117 turned on the data files don’t grow all up at once. When a first file is full the SQL Server expands it but the other file is not expanded until is full. Why is that so important? The SQL Server proportional fill algorithm will direct new extent allocations to the file with the most available space so new extents will be written to the file that was just expanded. When the TF 1117 is enabled it will cause all files to auto grow by their specified increment. That means all files will have the same percent of free space so we still have the benefit of evenly distributed IO. The TF 1117 is global flag so it affects all databases on the instance. Of course if a filegroup contains only one file the TF does not have any effect on it. Now let’s do a simple test. First let’s create a table in which every row will fit to a single page: The table definition is pretty simple as it has two integer columns and one character column of fixed size 8000 bytes: create table TF1117Tab ( col1 int, col2 int, col3 char (8000) ) go Now I load some data to the table to make sure that one of the data file must grow: declare @i int select @i = 1 while (@i < 800) begin insert into TF1117Tab values (@i, @i+1000, 'hello') select @i= @i + 1 end I can check the actual file size in the sys.database_files DMV: SELECT name, (size*8)/1024 'Size in MB' FROM sys.database_files GO As you can see only the first data file was expanded and the other has still the initial size: name Size in MB --------------------- ----------- TF1117 5 TF1117_log 1 TF1117_1 4 There is also other methods of looking at the events of file autogrows. One possibility is to create an Extended Events session and the other is to look into the default trace file: DECLARE @path NVARCHAR(260); SELECT @path = REVERSE(SUBSTRING(REVERSE([path]), CHARINDEX('\', REVERSE([path])), 260)) + N'log.trc' FROM sys.traces WHERE is_default = 1; SELECT DatabaseName, [FileName], SPID, Duration, StartTime, EndTime, FileType = CASE EventClass WHEN 92 THEN 'Data' WHEN 93 THEN 'Log' END FROM sys.fn_trace_gettable(@path, DEFAULT) WHERE EventClass IN (92,93) AND StartTime >'2014-07-12' AND DatabaseName = N'TF1117' ORDER BY StartTime DESC; After running the query I can see the file was expanded and how long did the process take which might be useful from the performance perspective. Now it’s time to turn on the flag 1117. DBCC TRACEON(1117) I dropped the database and recreated it once again. Then I ran the queries and observed the results. After loading the records I see that both files were evenly expanded: name Size in MB --------------------- ----------- TF1117 5 TF1117_log 1 TF1117_1 5 I found also information in the default trace. The query returned three rows. The last one is connected to my first experiment when the TF was turned off. The two rows shows that first file was expanded by 1MB and right after that operation the second file was expanded, too. This is what is this TF all about J

Read the article

Tutorial: Getting Started with the NoSQL JavaScript / Node.js API for MySQL Cluster

- by Mat Keep

Tutorial authored by Craig Russell and JD Duncan The MySQL Cluster team are working on a new NoSQL JavaScript connector for MySQL. The objectives are simplicity and high performance for JavaScript users: - allows end-to-end JavaScript development, from the browser to the server and now to the world's most popular open source database - native "NoSQL" access to the storage layer without going first through SQL transformations and parsing. Node.js is a complete web platform built around JavaScript designed to deliver millions of client connections on commodity hardware. With the MySQL NoSQL Connector for JavaScript, Node.js users can easily add data access and persistence to their web, cloud, social and mobile applications. While the initial implementation is designed to plug and play with Node.js, the actual implementation doesn't depend heavily on Node, potentially enabling wider platform support in the future. Implementation The architecture and user interface of this connector are very different from other MySQL connectors in a major way: it is an asynchronous interface that follows the event model built into Node.js. To make it as easy as possible, we decided to use a domain object model to store the data. This allows for users to query data from the database and have a fully-instantiated object to work with, instead of having to deal with rows and columns of the database. The domain object model can have any user behavior that is desired, with the NoSQL connector providing the data from the database. To make it as fast as possible, we use a direct connection from the user's address space to the database. This approach means that no SQL (pun intended) is needed to get to the data, and no SQL server is between the user and the data. The connector is being developed to be extensible to multiple underlying database technologies, including direct, native access to both the MySQL Cluster "ndb" and InnoDB storage engines. The connector integrates the MySQL Cluster native API library directly within the Node.js platform itself, enabling developers to seamlessly couple their high performance, distributed applications with a high performance, distributed, persistence layer delivering 99.999% availability. The following sections take you through how to connect to MySQL, query the data and how to get started. Connecting to the database A Session is the main user access path to the database. You can get a Session object directly from the connector using the openSession function: var nosql = require("mysql-js"); var dbProperties = { "implementation" : "ndb", "database" : "test" }; nosql.openSession(dbProperties, null, onSession); The openSession function calls back into the application upon creating a Session. The Session is then used to create, delete, update, and read objects. Reading data The Session can read data from the database in a number of ways. If you simply want the data from the database, you provide a table name and the key of the row that you want. For example, consider this schema: create table employee ( id int not null primary key, name varchar(32), salary float ) ENGINE=ndbcluster; Since the primary key is a number, you can provide the key as a number to the find function. function onSession = function(err, session) { if (err) { console.log(err); ... error handling } session.find('employee', 0, onData); }; function onData = function(err, data) { if (err) { console.log(err); ... error handling } console.log('Found: ', JSON.stringify(data)); ... use data in application }; If you want to have the data stored in your own domain model, you tell the connector which table your domain model uses, by specifying an annotation, and pass your domain model to the find function. var annotations = new nosql.Annotations(); function Employee = function(id, name, salary) { this.id = id; this.name = name; this.salary = salary; this.giveRaise = function(percent) { this.salary *= percent; } }; annotations.mapClass(Employee, {'table' : 'employee'}); function onSession = function(err, session) { if (err) { console.log(err); ... error handling } session.find(Employee, 0, onData); }; Updating data You can update the emp instance in memory, but to make the raise persistent, you need to write it back to the database, using the update function. function onData = function(err, emp) { if (err) { console.log(err); ... error handling } console.log('Found: ', JSON.stringify(emp)); emp.giveRaise(0.12); // gee, thanks! session.update(emp); // oops, session is out of scope here }; Using JavaScript can be tricky because it does not have the concept of block scope for variables. You can create a closure to handle these variables, or use a feature of the connector to remember your variables. The connector api takes a fixed number of parameters and returns a fixed number of result parameters to the callback function. But the connector will keep track of variables for you and return them to the callback. So in the above example, change the onSession function to remember the session variable, and you can refer to it in the onData function: function onSession = function(err, session) { if (err) { console.log(err); ... error handling } session.find(Employee, 0, onData, session); }; function onData = function(err, emp, session) { if (err) { console.log(err); ... error handling } console.log('Found: ', JSON.stringify(emp)); emp.giveRaise(0.12); // gee, thanks! session.update(emp, onUpdate); // session is now in scope }; function onUpdate = function(err, emp) { if (err) { console.log(err); ... error handling } Inserting data Inserting data requires a mapped JavaScript user function (constructor) and a session. Create a variable and persist it: function onSession = function(err, session) { var data = new Employee(999, 'Mat Keep', 20000000); session.persist(data, onInsert); } }; Deleting data To remove data from the database, use the session remove function. You use an instance of the domain object to identify the row you want to remove. Only the key field is relevant. function onSession = function(err, session) { var key = new Employee(999); session.remove(Employee, onDelete); } }; More extensive queries We are working on the implementation of more extensive queries along the lines of the criteria query api. Stay tuned. How to evaluate The MySQL Connector for JavaScript is available for download from labs.mysql.com. Select the build: MySQL-Cluster-NoSQL-Connector-for-Node-js You can also clone the project on GitHub Since it is still early in development, feedback is especially valuable (so don't hesitate to leave comments on this blog, or head to the MySQL Cluster forum). Try it out and see how easy (and fast) it is to integrate MySQL Cluster into your Node.js platforms. You can learn more about other previewed functionality of MySQL Cluster 7.3 here

Read the article

CodePlex Daily Summary for Sunday, November 04, 2012

CodePlex Daily Summary for Sunday, November 04, 2012Popular ReleasesZXMAK2: Version 2.6.8.4: fix tape autostop & tape iconProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...Access 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.2: Release 0.0.2 Created two new users. One belongs to the Administrators group and the other to the Public group. User: admin Pass: admin User: guest Pass: guest Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...mangopollo: Mangopollo 1.1: New classes : CycleTileData, IconicTileData, FlipTileData to mimic Windows Phone 8 API,BCF.Net: BCF.Net: BCF.Net-20121024 source codeAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...DirectX Tool Kit: October 30, 2012 (add WP8 support): October 30, 2012 Added project files for Windows Phone 8MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes NEW: Added Support for the phun.org forum FIXED: Kitty-Kats new Forum UrlLiberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesNew ProjectsAzure Storage Extensions For Storage Client V2.0: This library add LINQ syntax to the method Where on TableQuery<T> This support actually Windows Azure Storage Library V2.0BekkGitTfsDemo: A demo project for a speech on git-tfs.Booky: Booky is a utility bookmarking service which allows you to manage, share and find bookmarks to ultimately store bookmarks online for later use.BSA.Net: BSA.Net bzureC# to C++/CX Converter: Gives you the power of C++ at a cost of the simplicity of C#.Cloud Clipboard Sync: Share the clipboard content via cloud (ex. Dropbox).CricketDataMining: Btech Project on Cricket Data MiningCthulhu Invaders: Estudy project about design patternsDALHelper: Connect to your SQL Server database easily, efficiently, writing minimal code. Dwarf Fortress 2010 Backup Assistant: (Inspired by Minecraft Backup Assistant - http://minecraftbackup.codeplex.com/) Allows quick and easy backup/management of your DF savegames. Planned Features: * Rename saves and autosaves * Backup to zip/7-zip with metadata * Restore backupsInmobiliaria: Proyecto de nosotrosInventário com Código de Barras para Windows CE / Mobile: Aplicativo para inventário de produtos com código de barras. Executa em coletores de dados Windows CE ou Mobile.JQuery MVC in ASP.Net WebForms: The purpose of this project is to try and strip back a lot of the "bloat" in asp.net, use jquery and to build effective MVC in to WebFormsMar3ek's Download Manager 2: Mar3ek's Download Manager 2 - a simple, yet powerful, download manager for windows.Martian Shrimp: A small, simple and modular game making framework for modern browsers.MOJ: Moj is program created to help users organize and browse their virtual movie colectionNetFluid Starter Kit: NetFluid sample collection. Including : - Wallen garden controller - JSON RPC - Background thread web page - Dynamic image generation www.netfluid.orgO Library: The O Library is a SQL Framework to use with SQL Server 2008 & 2012 that enables developer to add a .Net feeling to their T-SQL code.Scanner With WIA2.0: warp implement WIA 2.0 with c#Simplify Workflow: A set of custom activities and templates extending Windows Workflow Foundation to simplify the development process for BPM or Workflow application.T4 C# Constructor Generator: T4 C# Constructor Generator is a T4 template for Visual Studio C# projects that lowers the overhead of the C# compiler by generating constructors.Unity.Mvc.Wcf: Removes the cross-cutting concern of managing WCF service clients used by your MVC controllers.WorkflowCode - Workflow in a Code framework: Intended to use by developers. As useful and simple as possible. It is the Workflow framework for a fast and readable code. With samples and tips.XNeon Netmedia Player: A Media Player, Social Networking Notifier and Internet Browser from the Founder of Aza DOSXooFoo: This project intends sharing tools for the XOOPS communityXoops France: Publications Xoops francophones (traductions noyau xoops, documentations, modules françisés, thèmes, plugin smarty, hacks, ...)Yasher (Yet Another Hasher): Compute hash of files or text. Supported algorithms : * MD5 * SHA1 * SHA256 * SHA384 * SHA512 * RIPEMD160

Read the article

Server Memory with Magento

- by Mohamed Elgharabawy

I have a cloud server with the following specifications: 2vCPUs 4G RAM 160GB Disk Space Network 400Mb/s System Image: Ubuntu 12.04 LTS I am only running Magento CE 1.7.0.2 on this server. Nothing else. Usually, the server has a loading time of 4-5 seconds. Recently, this has dropped to over 30 seconds and sometimes the server just goes away and I get HTTP error reports to my email stating that HTTP requests took more than 20000ms. Running top command and sorting them returns the following: top - 15:29:07 up 3:40, 1 user, load average: 28.59, 25.95, 22.91 Tasks: 112 total, 30 running, 82 sleeping, 0 stopped, 0 zombie Cpu(s): 90.2%us, 9.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31901 www-data 20 0 360m 71m 5840 R 7 1.8 1:39.51 apache2 32084 www-data 20 0 362m 72m 5548 R 7 1.8 1:31.56 apache2 32089 www-data 20 0 348m 59m 5660 R 7 1.5 1:41.74 apache2 32295 www-data 20 0 343m 54m 5532 R 7 1.4 2:00.78 apache2 32303 www-data 20 0 354m 65m 5260 R 7 1.6 1:38.76 apache2 32304 www-data 20 0 346m 56m 5544 R 7 1.4 1:41.26 apache2 32305 www-data 20 0 348m 59m 5640 R 7 1.5 1:50.11 apache2 32291 www-data 20 0 358m 69m 5256 R 6 1.7 1:44.26 apache2 32517 www-data 20 0 345m 56m 5532 R 6 1.4 1:45.56 apache2 30473 www-data 20 0 355m 66m 5680 R 6 1.7 2:00.05 apache2 32093 www-data 20 0 352m 63m 5848 R 6 1.6 1:53.23 apache2 32302 www-data 20 0 345m 56m 5512 R 6 1.4 1:55.87 apache2 32433 www-data 20 0 346m 57m 5500 S 6 1.4 1:31.58 apache2 32638 www-data 20 0 354m 65m 5508 R 6 1.6 1:36.59 apache2 32230 www-data 20 0 347m 57m 5524 R 6 1.4 1:33.96 apache2 32231 www-data 20 0 355m 66m 5512 R 6 1.7 1:37.47 apache2 32233 www-data 20 0 354m 64m 6032 R 6 1.6 1:59.74 apache2 32300 www-data 20 0 355m 66m 5672 R 6 1.7 1:43.76 apache2 32510 www-data 20 0 347m 58m 5512 R 6 1.5 1:42.54 apache2 32521 www-data 20 0 348m 59m 5508 R 6 1.5 1:47.99 apache2 32639 www-data 20 0 344m 55m 5512 R 6 1.4 1:34.25 apache2 32083 www-data 20 0 345m 56m 5696 R 5 1.4 1:59.42 apache2 32085 www-data 20 0 347m 58m 5692 R 5 1.5 1:42.29 apache2 32293 www-data 20 0 353m 64m 5676 R 5 1.6 1:52.73 apache2 32301 www-data 20 0 348m 59m 5564 R 5 1.5 1:49.63 apache2 32528 www-data 20 0 351m 62m 5520 R 5 1.6 1:36.11 apache2 31523 mysql 20 0 3460m 576m 8288 S 5 14.4 2:06.91 mysqld 32002 www-data 20 0 345m 55m 5512 R 5 1.4 2:01.88 apache2 32080 www-data 20 0 357m 68m 5512 S 5 1.7 1:31.30 apache2 32163 www-data 20 0 347m 58m 5512 S 5 1.5 1:58.68 apache2 32509 www-data 20 0 345m 56m 5504 R 5 1.4 1:49.54 apache2 32306 www-data 20 0 358m 68m 5504 S 4 1.7 1:53.29 apache2 32165 www-data 20 0 344m 55m 5524 S 4 1.4 1:40.71 apache2 32640 www-data 20 0 345m 56m 5528 R 4 1.4 1:36.49 apache2 31888 www-data 20 0 359m 70m 5664 R 4 1.8 1:57.07 apache2 32511 www-data 20 0 357m 67m 5512 S 3 1.7 1:47.00 apache2 32054 www-data 20 0 357m 68m 5660 S 2 1.7 1:53.10 apache2 1 root 20 0 24452 2276 1232 S 0 0.1 0:01.58 init Moreover, running free -m returns the following: total used free shared buffers cached Mem: 4003 3919 83 0 118 901 -/+ buffers/cache: 2899 1103 Swap: 0 0 0 To investigate this further, I have installed apache buddy, it recommeneded that I need to reduce the maxclient connections. Which I did. I also installed MysqlTuner and it suggests that I need to set my innodb_buffer_pool_size to = 3.0G. However, I cannot do that, since the whole memory is 4G. Here is the output from apache buddy: ### GENERAL REPORT ### Settings considered for this report: Your server's physical RAM: 4003MB Apache's MaxClients directive: 40 Apache MPM Model: prefork Largest Apache process (by memory): 73.77MB [ OK ] Your MaxClients setting is within an acceptable range. Max potential memory usage: 2950.8 MB Percentage of RAM allocated to Apache 73.72 % And this is the output of MySQLTuner: -------- Performance Metrics ------------------------------------------------- [--] Up for: 47m 22s (675K q [237.552 qps], 12K conn, TX: 1B, RX: 300M) [--] Reads / Writes: 45% / 55% [--] Total buffers: 2.1G global + 2.7M per thread (151 max threads) [OK] Maximum possible memory usage: 2.5G (64% of installed RAM) [OK] Slow queries: 0% (0/675K) [OK] Highest usage of available connections: 26% (40/151) [OK] Key buffer size / total MyISAM indexes: 36.0M/18.7M [OK] Key buffer hit rate: 100.0% (245K cached / 105 reads) [OK] Query cache efficiency: 92.5% (500K cached / 541K selects) [!!] Query cache prunes per day: 302886 [OK] Sorts requiring temporary tables: 0% (1 temp sorts / 15K sorts) [!!] Joins performed without indexes: 12135 [OK] Temporary tables created on disk: 25% (8K on disk / 32K total) [OK] Thread cache hit rate: 90% (1K created / 12K connections) [!!] Table cache hit rate: 17% (400 open / 2K opened) [OK] Open file limit used: 12% (123/1K) [OK] Table locks acquired immediately: 100% (196K immediate / 196K locks) [!!] InnoDB buffer pool / data size: 2.0G/3.5G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: query_cache_size ( 64M) join_buffer_size ( 128.0K, or always use indexes with joins) table_cache ( 400) innodb_buffer_pool_size (= 3G) Last but not least, the server still has more than 60% of free disk space. Now, based on the above, I have few questions: Are these numbers normal? Do they make sense? Do I need to upgrade the server? If I don't need to upgrade and my configuration is not correct, how do I optimize it?

Read the article

Linux policy routing - packets not coming back

- by Bugsik

i am trying to set up policy routing on my home server. My network looks like this: Host routed VPN gateway Internet link through VPN 192.168.0.35/24 ---> 192.168.0.5/24 ---> 192.168.0.1 DSL router 10.200.2.235/22 .... .... 10.200.0.1 VPN server The traffic from 192.168.0.32/27 should be and is routed through VPN. I wanted to define some routing policies to route some traffic from 192.168.0.5 through VPN as well - for start - from user with uid 2000. Policy routing is done using iptables mark target and ip rule fwmark. The problem: When connecting using user 2000 from 192.168.0.5 tcpdump shows outgoing packets, but nothing comes back. Traffic from 192.168.0.35 works fine (here I am not using fwmark but src policy). Here is my VPN gateway setup: # uname -a Linux placebo 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:49:02 UTC 2012 i686 i686 i386 GNU/Linux # iptables -V iptables v1.4.12 # ip -V ip utility, iproute2-ss111117 IPtables rules (all policies in table filter are ACCEPT) # iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 770K packets, 314M bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 767K packets, 312M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 5520 packets, 1920K bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 782K packets, 901M bytes) pkts bytes target prot opt in out source destination 74 4707 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner UID match 2000 MARK set 0x3 Chain POSTROUTING (policy ACCEPT 788K packets, 903M bytes) pkts bytes target prot opt in out source destination # iptables -t nat -nvL Chain PREROUTING (policy ACCEPT 996 packets, 51172 bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 7 packets, 432 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1364 packets, 112K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 2302 packets, 160K bytes) pkts bytes target prot opt in out source destination 119 7588 MASQUERADE all -- * vpn 0.0.0.0/0 0.0.0.0/0 Routing: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master lan state UNKNOWN qlen 1000 link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff valid_lft forever preferred_lft forever 3: lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff inet 192.168.0.5/24 brd 192.168.0.255 scope global lan inet6 fe80::240:63ff:fef9:c38f/64 scope link valid_lft forever preferred_lft forever 4: vpn: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 10.200.2.235/22 brd 10.200.3.255 scope global vpn # ip rule show 0: from all lookup local 32764: from all fwmark 0x3 lookup VPN 32765: from 192.168.0.32/27 lookup VPN 32766: from all lookup main 32767: from all lookup default # ip route show table VPN default via 10.200.0.1 dev vpn 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 # ip route show default via 192.168.0.1 dev lan metric 100 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 TCP dump showing no traffic coming back when connection is made from 192.168.0.5 user 2000 # tcpdump -i vpn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vpn, link-type RAW (Raw IP), capture size 65535 bytes ### Traffic from user 2000 on 192.168.0.5 ### 10:19:05.629985 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6887764 ecr 0,nop,wscale 4], length 0 10:19:21.678001 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6891776 ecr 0,nop,wscale 4], length 0 ### Traffic from 192.168.0.35 ### 10:23:12.066174 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [S], seq 2294159276, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 557451322 ecr 0,sackOK,eol], length 0 10:23:12.265640 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [S.], seq 2521908813, ack 2294159277, win 14480, options [mss 1367,sackOK,TS val 388565772 ecr 557451322,nop,wscale 1], length 0 10:23:12.276573 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [.], ack 1, win 8214, options [nop,nop,TS val 557451534 ecr 388565772], length 0 10:23:12.293030 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [P.], seq 1:480, ack 1, win 8214, options [nop,nop,TS val 557451552 ecr 388565772], length 479 10:23:12.574773 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [.], ack 480, win 7776, options [nop,nop,TS val 388566081 ecr 557451552], length 0

Read the article

Row Number Transformation

The Row Number Transformation calculates a row number for each row, and adds this as a new output column to the data flow. The column number is a sequential number, based on a seed value. Each row receives the next number in the sequence, based on the defined increment value. The final row number can be stored in a variable for later analysis, and can be used as part of a process to validate the integrity of the data movement. The Row Number transform has a variety of uses, such as generating surrogate keys, or as the basis for a data partitioning scheme when combined with the Conditional Split transformation. Properties Property Data Type Description Seed Int32 The first row number or seed value. Increment Int32 The value added to the previous row number to make the next row number. OutputVariable String The name of the variable into which the final row number is written post execution. (Optional). The three properties have been configured to support expressions, or they can set directly in the normal manner. Expressions on components are only visible on the hosting Data Flow task, not at the individual component level. Sometimes the data type of the property is incorrectly set when the properties are created, see the Troubleshooting section below for details on how to fix this. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Number transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Number Transformation for SQL Server 2005 Row Number Transformation for SQL Server 2008 Row Number Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.2.0.34 – Updated installer. (25 Jun 2008) Version 1.2.0.7 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Added the ability to reuse an existing column to hold the generated row number, as an alternative to the default of adding a new column to the output. (18 Jun 2006) Version 1.2.0.7 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. Added the ability to reuse an existing column to hold the generated row number, as an alternative to the default of adding a new column to the output. (18 Jun 2006) Version 1.0.0.0 - Public Release for SQL Server 2005 IDW 15 June CTP (29 Aug 2005) Screenshot Code Sample The following code sample demonstrates using the Data Generator Source and Row Number Transformation programmatically in a very simple package. Package package = new Package(); package.Name = "Data Generator & Row Number"; // Add the Data Flow Task Executable taskExecutable = package.Executables.Add("STOCK:PipelineTask"); // Get the task host wrapper, and the Data Flow task TaskHost taskHost = taskExecutable as TaskHost; MainPipe dataFlowTask = (MainPipe)taskHost.InnerObject; // Add Data Generator Source IDTSComponentMetaData100 componentSource = dataFlowTask.ComponentMetaDataCollection.New(); componentSource.Name = "Data Generator"; componentSource.ComponentClassID = "Konesans.Dts.Pipeline.DataGenerator.DataGenerator, Konesans.Dts.Pipeline.DataGenerator, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"; CManagedComponentWrapper instanceSource = componentSource.Instantiate(); instanceSource.ProvideComponentProperties(); instanceSource.SetComponentProperty("RowCount", 10000); // Add Row Number Tx IDTSComponentMetaData100 componentRowNumber = dataFlowTask.ComponentMetaDataCollection.New(); componentRowNumber.Name = "FlatFileDestination"; componentRowNumber.ComponentClassID = "Konesans.Dts.Pipeline.RowNumberTransform.RowNumberTransform, Konesans.Dts.Pipeline.RowNumberTransform, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b2ab4a111192992b"; CManagedComponentWrapper instanceRowNumber = componentRowNumber.Instantiate(); instanceRowNumber.ProvideComponentProperties(); instanceRowNumber.SetComponentProperty("Increment", 10); // Connect the two components together IDTSPath100 path = dataFlowTask.PathCollection.New(); path.AttachPathAndPropagateNotifications(componentSource.OutputCollection[0], componentRowNumber.InputCollection[0]); #if DEBUG // Save package to disk, DEBUG only new Application().SaveToXml(String.Format(@"C:\Temp\{0}.dtsx", package.Name), package, null); #endif package.Execute(); foreach (DtsError error in package.Errors) { Console.WriteLine("ErrorCode : {0}", error.ErrorCode); Console.WriteLine(" SubComponent : {0}", error.SubComponent); Console.WriteLine(" Description : {0}", error.Description); } package.Dispose(); Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed. ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component? Please also make sure you have installed a minimum of SP1 for SQL 2005. The IDtsPipelineEnvironmentService was added in SQL Server 2005 Service Pack 1 (SP1) (See http://support.microsoft.com/kb/916940). If you get an error Could not load type 'Microsoft.SqlServer.Dts.Design.IDtsPipelineEnvironmentService' from assembly 'Microsoft.SqlServer.Dts.Design, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'. when trying to open the user interface, it implies that your development machine has not had SP1 applied. Very occasionally we get a problem to do with the properties not being created with the correct data type. Since there is no way to programmatically to define the data type of a pipeline component property, it can only infer it. Whilst we set an integer value as we create the property, sometimes SSIS decides to define it is a decimal. This is often highlighted when you use a property expression against the property and get an error similar to Cannot convert System.Int32 to System.Decimal. Unfortunately this is beyond our control and there appears to be no pattern as to when this happens. If you do have more information we would be happy to hear it. To fix this issue you can manually edit the package file. In Visual Studio right click the package file from the Solution Explorer and select View Code, which will open the package as raw XML. You can now search for the properties by name or the component name. You can then change the incorrect property data types highlighted below from Decimal to Int32. <component id="37" name="Row Number Transformation" componentClassID="{BF01D463-7089-41EE-8F05-0A6DC17CE633}" … > <properties> <property id="38" name="UserComponentTypeName" …> <property id="41" name="Seed" dataType="System.Int32" ...>10</property> <property id="42" name="Increment" dataType="System.Decimal" ...>10</property> ... If you are still having issues then contact us, but please provide as much detail as possible about error, as well as which version of the the task you are using and details of the SSIS tools installed.

Read the article

Oracle Enterprise Manager 12c Configuration Best Practices (Part 3 of 3)

- by Bethany Lapaglia

<span id="XinhaEditingPostion"></span>&lt;span id=&quot;XinhaEditingPostion&quot;&gt;&lt;/span&gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; This is part 3 of a three-part blog series that summarizes the most commonly implemented configuration changes to improve performance and operation of a large Enterprise Manager 12c environment. A “large” environment is categorized by the number of agents, targets and users. See the Oracle Enterprise Manager Cloud Control Advanced Installation and Configuration Guide chapter on Sizing for more details on sizing your environment properly. Part 1 of this series covered recommended configuration changes for the OMS and Repository Part 2 covered recommended changes for the Weblogic server Part 3 covers general configuration recommendations and a few known issues The entire series can be found in the My Oracle Support note titled Oracle Enterprise Manager 12c Configuration Best Practices [1553342.1]. Configuration Recommendations Configure E-Mail Notifications for EM related Alerts In some environments, the notifications for events for different target types may be sent to different support teams (i.e. notifications on host targets may be sent to a platform support team). However, the EM application administrators should be well informed of any alerts or problems seen on the EM infrastructure components. Recommendation: Create a new Incident rule for monitoring all EM components and setup the notifications to be sent to the EM administrator(s). The notification methods available can create or update an incident, send an email or forward to an event connector. To setup the incident rule set follow the steps below. Note that each individual rule in the rule set can have different actions configured. 1. To create an incident rule for monitoring the EM components, click on Setup / Incidents / Incident Rules. On the All Enterprise Rules page, click on the out-of-box rule called “Incident management Ruleset for all targets” and then click on the Actions drop down list and select “Create Like Rule Set…” 2. For the rule set name, enter a name such as MTM Ruleset. Under the Targets tab, select “All targets of types” and select “OMS and Repository” from the drop down list. This target type contains all of the key EM components (OMS servers, repository, domains, etc.) 3. Click on the Rules tab. To edit a rule, click on the rule name and click on Edit as seen below 4. Modify the following rules: a. Incident creation Rule for metric alerts i. Leave the Type set as is but change the Severity to add Warning by clicking on the drop down list and selecting “Warning”. Click Next. ii. Add or modify the actions as required (i.e. add email notifications). Click Continue and then click Next. iii. Leave the Name and description the same and click Next. iv. Click Continue on the Review page. b. Incident creation Rule for target unreachable. i. Leave the Type set as is but change the Target type to add OMS and Repository by clicking on the drop down list selecting “OMS and Repository”. Click Next. ii. Add or modify the actions as required (i.e. add email notifications) Click Continue and then click Next. iii. Leave the Name and description the same and click Next. iv. Click Continue on the Review page. 5. Modify the actions for any other rule as required and be sure to click the “Save” push button to save the rule set or all changes will be lost. Configure Out-of-Band Notifications for EM Agent Out-of-Band notifications act as a backup when there’s a complete EM outage or a repository database issue. This is configured on the agent of the OMS server and can be used to send emails or execute another script that would create a trouble ticket. It will send notifications about the following issues: • Repository Database down • All OMS are down • Repository side collection job that is broken or has an invalid schedule • Notification job that is broken or has an invalid schedule Recommendation: To setup Out-of-Band Notifications, refer to the MOS note “How To Setup Out Of Bound Email Notification In 12c” (Doc ID 1472854.1) Modify the Performance Test for the EM Console Service The EM Console Service has an out-of-box defined performance test that will be run to determine the status of this service. The test issues a request via an HTTP method to a specific URL. By default, the HTTP method used for this test is a GET but for performance reasons, should be changed to HEAD. The URL used for this request is set to point to a specific OMS server by default. If a multi-OMS system has been implemented and the OMS servers are behind a load balancer, then the URL in this section must be modified to point to the load balancer name instead of a specific server name. If this is not done and a portion of the infrastructure is down then the EM Console Service will show down as this test will fail. Recommendation: Modify the HTTP Method for the EM Console Service test and the URL if required following the detailed steps below. 1. To create an incident rule for monitoring the EM components, click on Targets / Services. From the list of services, click on the EM Console Service. 2. On the EM Console Service page, click on the Test Performance tab. 3. At the bottom of the page, click on the Web Transaction test called EM Console Service Test 4. Click on the Service Tests and Beacons breadcrumb near the top of the page. 5. Under the Service Tests section, make sure the EM Console Service Test is selected and click on the Edit push button. 6. Under the Transaction section, make sure the Access Logout page transaction is selected and click on the Edit push button 7) Under the Request section, change the HTTP Method from the default of GET to the recommended value of HEAD. The URL in this section must be modified to point to the load balancer name instead of a specific server name if multi-OMSes have been implemented. Check for Known Issues Job Purge Repository Job is Shown as Down This issue is caused after upgrading EM from 12c to 12cR2. On the Repository page under Setup ? Manage Cloud Control ? Repository, the job called “Job Purge” is shown as down and the Next Scheduled Run is blank. Also, repvfy reports that this is a missing DBMS_SCHEDULER job. Recommendation: In EM 12cR2, the apply_purge_policies have been moved from the MGMT_JOB_ENGINE package to the EM_JOB_PURGE package. To remove this error, execute the commands below: $ repvfy verify core -test 2 -fix To confirm that the issue resolved, execute $ repvfy verify core -test 2 It can also be verified by refreshing the Job Service page in EM and check the status of the job, it should now be Up. Configure the Listener Targets in EM with the Listener Password (where required) EM will report this error every time it is encountered in the listener log file. In a RAC environment, typically the grid home and rdbms homes are owned by different OS users. The listener always runs from the grid home. Only the listener process owner can query or change the listener properties. The listener uses a password to allow other OS users (ex. the agent user) to query the listener process for parameters. EM has a default listener target metric that will query these properties. If the agent is not permitted to do this, the TNS incident (TNS-1190) will be logged in the listener’s log file. This means that the listener targets in EM also need to have this password set. Not doing so will cause many TNS incidents (TNS-1190). Below is a sample of this error from the listener log file: Recommendation: Set a listener password and include it in the configuration of the listener targets in EM For steps on setting the listener passwords, see MOS notes: 260986.1 , 427422.1

Read the article

CodePlex Daily Summary for Friday, October 11, 2013

CodePlex Daily Summary for Friday, October 11, 2013Popular ReleasesStackBuilder: StackBuilder 1.0.17.0: Corrected minor bug in box/case analysisPowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.0.6: Added PersistPrompt parameter to Show-InstallationWelcome and Show-InstallationPrompt. Prompt window is persistently returned to center screen after interval specified in config file (default 10 seconds). For Show-InstallationWelcome, this only takes effect if deferral is not available to user. The user will have no option but to respond to the prompt - resistance is futile! Added example advanced Office 2010 deployment script Asynchronous actions now write to the same log file as synchro...XrmServiceToolkit - A Microsoft Dynamics CRM 2011 & CRM 2013 JavaScript Library: XrmServiceToolkit 2.0.0 for CRM 2011 and CRM 2013: Version: 2.0.0 (beta) Date: October, 2013 Dependency: JSON2, jQuery (latest or 1.7.2 above) ---NOTE---Due to the changes for CRM 2013, please use the attached version of JSON2 and jQuery Tested Platform: IE10, latest Chrome, latest FireFox Tested CRM Server: CRM 2013 on-premise RTM, CRM 2013 online, CRM 2011 with RU15 Changes: New Behavior - XrmServiceTookit.Soap.Fetch parameters change to work with asynchronous callback compared to 1.4.2 beta: XrmS...MoreTerra (Terraria World Viewer): MoreTerra 1.11.3: =========== =New Features= =========== New Markers added for Plantera's Bulb, Heart Fruits and Gold Cache. Markers now correctly display for the gems found in rock debris on the floor. =========== =Compatibility= =========== Fixed header changes found in Terraria 1.0.3.1Dynamics AX 2012 R2 Kitting: First Beta release of Kitting: First Beta release of Kitting Install by using XPO or Models.C# Intellisense for Notepad++: Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.Generic Unit of Work and Repositories Framework: v2.0: Async methods for Repostiories - Ivan (@ifarkas) OData Async - Ivan (@ifarkas) Glimpse MVC4 workig with MVC5 Glimpse EF6 Northwind.Repostiory Project (layer) best practices for extending the Repositories Northwind.Services Project (layer), best practices for implementing business facade Live Demo: http://longle.azurewebsites.net/Spa/Product#/list Documentation: http://blog.longle.net/2013/10/09/upgrading-to-async-with-entity-framework-mvc-odata-asyncentitysetcontroller-kendo-ui-gli...Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...Ghostscript.NET: Ghostscript.NET v.1.1.1.: v.1.1.1. fixed problem in GhostscriptRasterizer and GhostscriptViewer when MediaBox contains negative llx or lly values. (problem reported by "Prasenjit Das"). added GhostscriptPngDevice, a friendly output device class with all png devices related switches. (GhostscriptPngDevice supports: png16m, pngalpha, pnggray, png256, png16, pngmono, pngmonod). added GhostscriptJpegDevice, a friendly output device class with all jpeg devices related switches. (GhostscriptJpegDevice supports: jpeg, jp...xFunc: xFunc 2.7.3: Fixed memory leak. Small fixes.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...Fast YouTube Downloader: Youtube Downloader 2.1: Youtube Downloader 2.1NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themescmdradio: v0.1.1: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionVidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.New ProjectsA fork of the RPG Stendhal: Stendhal is a multiplayer online adventures game developed using the Arianne game development system. Stendhal is written using Java 6 and Java2D environment.Board Game Up: Welcome to the codeplex of the Board Game Up website. This contains the entire source code for www.boardgameup.com, the free board game meet up website.Business Information Organizer System: Goal every aspect of small business: services, inventory, education, finance, and heath. Must support every language and country.CRM 2011 to 2013 Icon Upgrader: This application allows you to automatically upgrade CRM 2011 icons to CRM 2013 icons. This application converts entity icons into grey scale.Data Access: CQRS Highway: Command Query Responsibility Segregation pattern for data access.djtest001: this is a summary Test1DNN Evoq Social Invitation Registration: Invitation and Registration module for DNN Evoq Social.Dynamics AX 2012 R2 Kitting: Dynamics AX 2012 R2 - Kitting. A solution for creating and using Kit's on salesorders.IlluminatiEngine: This is a 3D deferred lighting engine, it has skinned mesh animation as well as instanced mesh (including skinned) and a few post processing effects, DoF, etc..jean1011jabbrchang: wJessWork: for now let us make it emptyKiller Core: Starquake re makeKinect Stream Saver Application: The application allows users to display and save the Kinect data streams. The Kinect Stream Saver application is based on the KinectExplorer-D2D ( C++) sample.LUA for Windows CE: LUA porting to Windows CE devices.OpenDespatch for Peoplevox: OpenDespatch is an add-on for Peoplevox to complete despatch using external carriers such as DPD and RM-DMO. Prontuário Eletrônico: Projeto para cadeira de Projeto de Desenvolvimento de software do curso de sistemas de informação que visa a unificação do prontuário médicoRiver Niles Operating System: The project is a research of C# language program , that will be cover to a full Operating SystemSocketIO4WinRT.Client: This is a port of the SocketIO4Net.Client project, to run on WinRT (Windows 8) for C# users.SQL Data: SQL Data is an ORM for C# without any of the bloat.Task Factory Bug Sample: This project is used to demonstrate a bug in .NET 4.0 Runtime for Task Factory.Team Manticore Student System: Student system applicationVccDryad: VccDryad aims at extending VCC with proof strategies that enable automated verification of C programs that manipulate complex data structures. X0oo0Z: X0oo0ZYT: mouse move

Read the article

My sound stopped working today, how can I fix it?

- by Oli

This seems to be a problem with pulseaudio. I was logged in over VNC on my phone and started playing a video this caused X to crash (as sometimes happens). I restarted and suddenly the sound doesn't work. I have a Intel HDA/Realtek ALC889 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller alsamixer is detecting this just fine. PulseAudio doesn't detect this alsa device so is using auto_null as the default sink (logs below). When I properly kill PulseAudio (tell it not to auto-start) direct ALSA communication with the sound card works just fine. speaker-test, for example, works. So the hardware and ALSA layers are fine IMO. In the logs, it seems that the card might be "busy" but I really don't know how or why it would be now (and never before). Is there an ALSA lock file somewhere that it still there because of my crash? I just ran sudo fuser /dev/snd/* and saw this: oli@bert:~$ sudo fuser /dev/snd/* /dev/snd/controlC0: 1884 /dev/snd/pcmC0D0c: 1884m /dev/snd/timer: 1884 A look at the process list (ps aux | grep 1884) tells me process 1884 is arecord -c 1 -f S16_LE -r 8000 -t raw. No idea what this is or why it's running. When I try and kill arecord (as root), it just respawns and rebinds on the hardware. I'm in a very annoying situation where I don't know what is going on and don't know how to find out. I'm open to all suggestions to get this working again. Fire away. And here's what I get when I stop PA auto-loading, kill it and then start it with -vvvv. oli@bert:~$ pulseaudio -vvvvv I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted I: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted D: core-rtclock.c: Timer slack is set to 50 us. D: core-util.c: RealtimeKit worked. I: core-util.c: Successfully gained nice level -11. I: main.c: This is PulseAudio 0.9.21-63-gd3efa-dirty D: main.c: Compilation host: x86_64-pc-linux-gnu D: main.c: Compilation CFLAGS: -g -O2 -g -Wall -O3 -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option D: main.c: Running on host: Linux x86_64 2.6.38-rc3 #1 SMP Tue Feb 1 10:53:04 GMT 2011 D: main.c: Found 8 CPUs. I: main.c: Page size is 4096 bytes D: main.c: Compiled with Valgrind support: no D: main.c: Running in valgrind mode: no D: main.c: Running in VM: no D: main.c: Optimised build: yes D: main.c: All asserts enabled. I: main.c: Machine ID is 8310740c4729ef474fe5ecec4bbf5a6b. I: main.c: Session ID is 8310740c4729ef474fe5ecec4bbf5a6b-1297338553.571075-1050119523. I: main.c: Using runtime directory /home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-runtime. I: main.c: Using state directory /home/oli/.pulse. I: main.c: Using modules directory /usr/lib/pulse-0.9.21/modules. I: main.c: Running in system mode: no I: main.c: Fresh high-resolution timers available! Enjoy ol' chap! I: cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 I: svolume_mmx.c: Initialising MMX optimized functions. I: remap_mmx.c: Initialising MMX optimized remappers. I: svolume_sse.c: Initialising SSE2 optimized functions. I: remap_sse.c: Initialising SSE2 optimized remappers. I: sconv_sse.c: Initialising SSE2 optimized conversions. D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472 D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes.tdb' I: module-device-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-device-volumes'. I: module.c: Loaded "module-device-restore" (index: #0; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes.tdb' I: module-stream-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-stream-volumes'. I: module.c: Loaded "module-stream-restore" (index: #1; argument: ""). D: database-tdb.c: Opened TDB database '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database.tdb' I: module-card-restore.c: Sucessfully opened database file '/home/oli/.pulse/8310740c4729ef474fe5ecec4bbf5a6b-card-database'. I: module.c: Loaded "module-card-restore" (index: #2; argument: ""). I: module.c: Loaded "module-augment-properties" (index: #3; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards. I: module.c: Loaded "module-udev-detect" (index: #4; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-bluetooth-discover.so': success D: dbus-util.c: Successfully connected to D-Bus system bus ba7c9a1f90b3d49d930bca2100000015 as :1.62 D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired D: bluetooth-util.c: Bluetooth daemon is apparently not available. I: module.c: Loaded "module-bluetooth-discover" (index: #5; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-esound-protocol-unix.so': success I: module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #7; argument: ""). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-gconf.so': success I: module.c: Loaded "module-gconf" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'auto_null' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'auto_null.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). D: module-always-sink.c: Autoloading null-sink as no other sinks detected. I: sink.c: Created sink 0 "auto_null" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: sink.c: device.description = "Dummy Output" I: sink.c: device.class = "abstract" I: sink.c: device.icon_name = "audio-card" D: core-subscribe.c: Dropped redundant event due to change event. I: source.c: Created source 0 "auto_null.monitor" with sample spec s16le 6ch 44100Hz and channel map front-left,front-left-of-center,front-center,front-right,front-right-of-center,rear-center I: source.c: device.description = "Monitor of Dummy Output" I: source.c: device.class = "monitor" I: source.c: device.icon_name = "audio-input-microphone" D: module-null-sink.c: Thread starting up I: module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'"). I: module.c: Loaded "module-always-sink" (index: #12; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #13; argument: ""). D: module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds. I: module.c: Loaded "module-suspend-on-idle" (index: #14; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1" D: module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1 I: module.c: Loaded "module-console-kit" (index: #15; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #16; argument: ""). D: dbus-util.c: Successfully connected to D-Bus session bus efbffc6788fad56cfd64d40c00000018 as :1.182 D: main.c: Got org.pulseaudio.Server! I: main.c: Daemon startup complete. I: client.c: Created 1 "Native client (UNIX socket client)" I: client.c: Created 2 "Native client (UNIX socket client)" D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: protocol-native.c: Protocol version: remote 16, local 16 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1 D: protocol-native.c: SHM possible: yes D: protocol-native.c: Negotiated SHM: yes D: module-augment-properties.c: Looking for .desktop file for gnome-volume-control-applet D: module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon D: core-subscribe.c: Dropped redundant event due to change event. I: module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ... D: sink.c: Suspend cause of sink auto_null is 0x0004, suspending Note the one section that seems to find the hardware but says it's busy (no idea if this is relevant). D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.21/modules/module-udev-detect.so': success D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes D: module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes I: module-udev-detect.c: Found 1 cards.

Read the article

Taking web sites offline for demonstration

While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

Read the article

Why does an error appear every time I try to open the Ubuntu Software Center? [duplicate]

- by askubuntu7639

This question already has an answer here: How do I remove a broken software source? 3 answers There is a glitch on the Ubuntu Software Center and whenever I open it an error appears and it keeps loading and never opens. Why does this happen? I have installed Ubuntu 13.04 on a disk and partitioned it. Please help me and ask for excess information if you need it. If you know of any duplicates please show me them!! This is the output of a question someone asked me. SystemError: E:Type '<!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list This next output is the output of cat /etc/apt/sources.list.d/medibuntu.list </div> <div style="float:left;"> <div class="textwidget"><script type="text/javascript"> </div> Unixmen Archive Select Month September 2013 August 2013 July 2013 June 2013 May 2013 April 2013 March 2013 February 2013 January 2013 December 2012 November 2012 October 2012 September 2012 August 2012 July 2012 June 2012 May 2012 April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011 January 2011 December 2010 November 2010 October 2010 September 2010 August 2010 July 2010 June 2010 May 2010 April 2010 March 2010 February 2010 January 2010 December 2009 November 2009 October 2009 September 2009 August 2009 July 2009 June 2009 May 2009 April 2009 March 2009 February 2009 January 2009 December 2008 Tags Cloudandroid apache browser Centos chrome command line Debian eyecandy Fedora firefox games gaming gnome google karmic koala kde libreoffice Linux linux distribution LinuxMint lucid lynx maverick meerkat mysql news oneiric ocelot openoffice opensource opensuse oracle ppa Precise Pangolin release RHEL security server software themes tools ubuntu unix upgrade virtualbox vlc windows wine Unixmen Twitts Firefox 16, a treat for developers http://t.co/cnd27CzT Ubuntu 12.10 ‘Quantal Quetzal’: Beta 2 Sneak Peek http://t.co/hd4LwDOy Top 5 security Myths about Linux; and their realities http://t.co/zO1LgHST About Us Advertising Sitemap Privacy Contact Us Hire Us Copyright © 2008-2013 Unixmen.com . Maintained by Unixmen . /* */ jQuery(document).on('ready post-load', easy_fancybox_handler ); http://www.w3-edge.com/wordpress-plugins/ Page Caching using apc Database Caching 3/186 queries in 0.035 seconds using apc Content Delivery Network via 180016988.r.cdn77.net Served from: www.unixmen.com @ 2013-09-25 01:38:14 by W3 Total Cache

Read the article

CodePlex Daily Summary for Wednesday, May 21, 2014

CodePlex Daily Summary for Wednesday, May 21, 2014Popular ReleasesSpotify Plugin for Jamcast: Spotify Plugin for Jamcast v2.0: This release works with Jamcast 2.0 API. Implements search. Requires libspotifydotnet 4.0.0.0 and libspotify 12.1.51libspotify.NET - a managed interop library for libspotify: libspotify.NET v4.0 (x86): Bugfixes, API changes.SharpLightReporting: SharpLightReporting 1.0.2: Bug Fix: Picture tag is now able to get the data from the property. NullReferenceException is not being thrown now. Added: addtocolpos and addtorowpos attributes to chat tagWindows Embedded Board Support Package for BeagleBone: WEC7 BeagleBone Black 01.05.00: Demo image. Runs on BeagleBone White and Black. On BeagleBone Black works with uSD or eMMC based images SDK and demo tests included Now with Silverlight and OpenGL (PoweVR) support! Built and maintained in the U.S.A.!MISAO: Ver. 5.4: Fix bugs (Nicovideo viwer add-in) Add Masakari option (Nicovideo viwer add-in)SubVersionOne: SubVersionOne 1.3: Removed reference to old V1 SDK and changed all queries to use REST API. Added status and scopes to the workitem view.VisioAutomation: Visio PowerShell Module (VisioPS) 1.1.26: DocumentationDocumentation is here http://sdrv.ms/11AWkp7 Screencasthttp://vimeo.com/61329170 FilesFor easy installation, download and run the MSI file. If you want to manually install, a ZIP file is provided. ChangeLog *Version 1.1.25 Changed Module name to Visio. So to import the module use Import-Module Visio Replaced Invoke-VisioDraw with Out-Visio *Version 1.1.25 fixed Get-VisioCustomProperties *Version 1.1.23 Fixed a logging bug - was dividing by zero when operations were done ...Extended T-SQL Collector: 1.1.5: Modified to allow collecting system collection sets where the "Generic T-SQL Query collector type" is used. Pick the bitness of your SQL Server installation. If you have a 32 bit SQL Server instance installed on a 64 bit Windows Server, use the x86 setup kit. Both setup kits install the same exact code, but the target directory is different on x64 machines ("Program Files" for x64 and "Program Files (x86)" for x86).EdiFabric: Release 3.1: Fixed parse tree generation for the latest validation schemasCompare .NET Objects: Version 2.03.0.0: Support for System.Drawing.Font type New Option to Ignore Unknown Object TypesQuickMon: Version 3.11: This release adds some major changes to the core monitoring engine. 1. Polling overrides: Each collector entry can specify a minimum time updating is allowed for it and dependent collector entries. 2. Polling frequency sliding: Additional to polling overrides a collector entry can specify 'sliding' polling frequency if the state remains the same. This means the frequency slows down reducing overhead of polling on a stagnant resource. 3. The monitor pack has an overriding frequency. If used...Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.WordMat: WordMat v. 1.06: Check WordMat.blogspot.com for a complete description of new features.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixSEToolbox: SEToolbox 01.030.008 Release 1: Fixed cube editor failing to apply color to cubes. Added to cube editor, replace cube dialog, and Build Percent dialog. Corrected for hidden asteroid ore, allowing rare ore to show when importing an asteroid, or converting a 3d model to an asteroid (still appears to be limitations on rare ore in small asteroids). Allowed ore selection to Asteroid file import. (Can copy/import and convert existing asteroid to another ore). Added progress bars to common long running operations. Fixed ...New Projects.Net Flexport: Library for importing and exporting data from and to csv or text files using attributes to describe the export format.Chess Platform: Simple Chess Platform with basic players and GUI.DMEditor: DMEditor is a "kit librarian" for the Alesis DM10 electronic drum module, allowing you to save and load drum kits, individual instruments, or even full modules.Endomondo Export: Endomondo GPX TCX activity exporter / downloaderHunt for Red October HTW: Hunting the Red October (Wumpus) at Microsoft 2014JuegoIngenio: ALTO JUEGOOrchard Liquid Markup: Orchard module for adding support for templates written in Liquid Markup (http://liquidmarkup.org/). Uses DotLiquid (http://dotliquidmarkup.org/).Panorama: No summaryPunto de Venta TCU: Sistema Punto de VentaString.Format Diagnostic (Roslyn): The aim of the project is to enable "Roslyn" diagnostics for the validation of the formatstring supplied to String.Format.System Layer: Operating System abstraction layer which will enable developers to create applications and device drivers which run on virtually any platform.XiaoQingDao: XiaoQingDao????????-????????【??】????????????: ??????????????,????,??????????? ???? ???? ?????????,???,??,?????! ??????-??????【??】??????????: ?????????? ???? ???? ???? ???? ???? ??????? ?????，????????????????. ??????-??????【??】??????????: ???????????????:?????? ???? ??????,???????,??????,???????。 ??????-??????【??】??????????: ????????,??????:?????,?????,??????,??????????,????????。????????! ??????-??????【??】??????????: ??????????????????、????,??100%????,??????,????????????,???????????! ??????-??????【??】??????????: ????????????????????,??????????,????????、????,??????????,??????????。 ???????-???????【??】???????????: ???????????????????、????、??????、????????,????????????,???????????！ ???????-???????【??】???????????: ????????????????、????、????、??????、????、???????,?????,?????????! ???????-???????【??】???????????: ????????????????????????????,???????????????????????,???????。 ??????-??????【??】??????????: ??????,??,????????。 ... ??????????????????、??????????????????... ??????-??????【??】??????????: ?????????????,??,??,??,??? ?,??,,??,??,??,??,??,??,????????,??????！ ??????-??????【??】??????????: ????????????????????,?????,???????,???????????,??????! ??????-??????【??】??????????: ???????????,?????????????? ??。????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ???????????????????????:????、????、??????????????,????????。????????! ??????-??????【??】??????????: ????????????????????????,??????????,????,????,?????????、??????,??????。 ??????-??????【??】??????????: ???????????、????、????、??????????,???,?????,???????????????. ??????-??????【??】??????????: ???????????????,????,???????、???????????,???????????,????,?????,???????。 ??????-??????【??】??????????: ????????????????,?????????、??、??、????,??????????,?????????????！ ????: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。??????-??????【??】??????????: ?????????????????,???????????????。?????????????,???????,?????????。 ??????-??????【??】??????????: ??????????????????,??:??????,????,????,????,?????,??????????????. ??????-??????【??】??????????: ????????????????????,?????????????,???????????.????????????,????????????! ??????-??????【??】??????????: ??????,?????????,?????????????。?????????????,?????????,???????。 ??????-??????【??】??????????: ??????????????:????,????,????,???????,????????,??????:????????,?????! ??????-??????【??】??????????: ??????????????????????????,???????????????,????????????????！ ??????-??????【??】??????????: ???????????????????,????,????,????,???????,?????,?????.??????。 ??????-??????【??】??????????: ??????????,????????,?????,???,???????????,???????????,?????,??????！ ??????-??????【??】??????????: ????????????????????????????:???????,??????,????,????,????,?????！ ??????-??????【??】??????????: ??????????????????,???????、????、????、??????、???????,??????,???????????。 ??????-??????【??】??????????: ????????????????,???????、???????????,????????,????,?????????,??????,??????! ??????-??????【??】??????????: ?????????????????,????????????,?????????????????,??????,????????! ??????-??????【??】??????????: ??????????????,?????????????,????,?????????,?????????????,?????,?????! ??????-??????【??】??????????: ?????????????????????,????,????,??????????。???????????????,??,??,??????????,??????... ??????-??????【??】??????????: ?????????????????,???????????????。???????????,??????:????、????、???????！ ???????-???????【??】???????????: ?????????????????????,???、???!???????,????????????????,????????????,???! ???????-???????【??】???????????: ????????????、?????、?????、?????、?????、????,???????????,?????,??????！ ???????-???????【??】???????????: ?????????????????,?????????????? ??。??????????、????、????、?????????? ???????。 ??????-??????【??】??????????: ??????????,??????????????????????,???????????????,?????????????！ ??????-??????【??】??????????: ??????????????????????,?????, ... ????????????,????,????,?????,???????。 ??????-??????【??】??????????: ????????????????，?????????/?,,???????????,??????????????! ???? (?????): ???: ????（?????）??????-??????【??】??????????: ?????????????、?????、?????、????、?????,??????????。????????????????! ??????-??????【??】??????????: ??????????????????,???????????,??????????????,??????????，??????????????！ ??????-??????【??】??????????: ??????????????????,????????????,?????、??、????,?????,??????！ ??????-??????【??】??????????: ??????????????????????,???????????????,????????????????????! ??????-??????【??】??????????: ????????????,??????????、??????,??????????、????、????、???????。 ??????-??????【??】??????????: ??????????????????????,???????????????,???????,?????,?????,????? !!! ??????-??????【??】??????????: ?????????????????,????:????,????,????,??????,?????,???????????????! ??????-??????【??】??????????: ?????????????????"????,????"???,????????????????????????,??????????????。 ??????-??????【??】??????????: ???????????????????????????、??????????????,??????????????。 ??????-??????【??】??????????: ????????????????????????、??????,????、?????、????， ?????????，?????????????！ ??????-??????【??】??????????: ????????,??????,?????????????????????,???????????????????????。 ??????-??????【??】??????????: ?????????????????????、????、????、??????、???????,??????、??????。 ??——?????: None

Read the article

Developing a SQL Server Function in a Test-Harness.

- by Phil Factor

/* Many times, it is a lot quicker to take some pain up-front and make a proper development/test harness for a routine (function or procedure) rather than think ‘I’m feeling lucky today!’. Then, you keep code and harness together from then on. Every time you run the build script, it runs the test harness too. The advantage is that, if the test harness persists, then it is much less likely that someone, probably ‘you-in-the-future’ unintentionally breaks the code. If you store the actual code for the procedure as well as the test harness, then it is likely that any bugs in functionality will break the build rather than to introduce subtle bugs later on that could even slip through testing and get into production. This is just an example of what I mean. Imagine we had a database that was storing addresses with embedded UK postcodes. We really wouldn’t want that. Instead, we might want the postcode in one column and the address in another. In effect, we’d want to extract the entire postcode string and place it in another column. This might be part of a table refactoring or int could easily be part of a process of importing addresses from another system. We could easily decide to do this with a function that takes in a table as its parameter, and produces a table as its output. This is all very well, but we’d need to work on it, and test it when you make an alteration. By its very nature, a routine like this either works very well or horribly, but there is every chance that you might introduce subtle errors by fidding with it, and if young Thomas, the rather cocky developer who has just joined touches it, it is bound to break. right, we drop the function we’re developing and re-create it. This is so we avoid the problem of having to change CREATE to ALTER when working on it. */ IF EXISTS(SELECT * FROM sys.objects WHERE name LIKE ‘ExtractPostcode’ and schema_name(schema_ID)=‘Dbo’) DROP FUNCTION dbo.ExtractPostcode GO /* we drop the user-defined table type and recreate it */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘AddressesWithPostCodes’ and schema_name(schema_ID)=‘Dbo’) DROP TYPE dbo.AddressesWithPostCodes GO /* we drop the user defined table type and recreate it */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘OutputFormat’ and schema_name(schema_ID)=‘Dbo’) DROP TYPE dbo.OutputFormat GO /* and now create the table type that we can use to pass the addresses to the function */ CREATE TYPE AddressesWithPostCodes AS TABLE ( AddressWithPostcode_ID INT IDENTITY PRIMARY KEY, –because they work better that way! Address_ID INT NOT NULL, –the address we are fixing TheAddress VARCHAR(100) NOT NULL –The actual address ) GO CREATE TYPE OutputFormat AS TABLE ( Address_ID INT PRIMARY KEY, –the address we are fixing TheAddress VARCHAR(1000) NULL, –The actual address ThePostCode VARCHAR(105) NOT NULL – The Postcode ) GO CREATE FUNCTION ExtractPostcode(@AddressesWithPostCodes AddressesWithPostCodes READONLY) /** summary: > This Table-valued function takes a table type as a parameter, containing a table of addresses along with their integer IDs. Each address has an embedded postcode somewhere in it but not consistently in a particular place. The routine takes out the postcode and puts it in its own column, passing back a table where theinteger key is accompanied by the address without the (first) postcode and the postcode. If no postcode, then the address is returned unchanged and the postcode will be a blank string Author: Phil Factor Revision: 1.3 date: 20 May 2014 example: – code: returns: > Table of Address_ID, TheAddress and ThePostCode. **/ RETURNS @FixedAddresses TABLE ( Address_ID INT, –the address we are fixing TheAddress VARCHAR(1000) NULL, –The actual address ThePostCode VARCHAR(105) NOT NULL – The Postcode ) AS – body of the function BEGIN DECLARE @BlankRange VARCHAR(10) SELECT @BlankRange = CHAR(0)+‘- ‘+CHAR(160) INSERT INTO @FixedAddresses(Address_ID, TheAddress, ThePostCode) SELECT Address_ID, CASE WHEN start>0 THEN REPLACE(STUFF([Theaddress],start,matchlength,”),‘ ‘,‘ ‘) ELSE TheAddress END AS TheAddress, CASE WHEN Start>0 THEN SUBSTRING([Theaddress],start,matchlength-1) ELSE ” END AS ThePostCode FROM (–we have a derived table with the results we need for the chopping SELECT MAX(PATINDEX([matched],‘ ‘+[Theaddress] collate SQL_Latin1_General_CP850_Bin)) AS start, MAX( CASE WHEN PATINDEX([matched],‘ ‘+[Theaddress] collate SQL_Latin1_General_CP850_Bin)>0 THEN TheLength ELSE 0 END) AS matchlength, MAX(TheAddress) AS TheAddress, Address_ID FROM (SELECT –first the match, then the length. There are three possible valid matches ‘%['+@BlankRange+'][A-Z][0-9] [0-9][A-Z][A-Z]%’, 7 –seven character postcode UNION ALL SELECT ‘%['+@BlankRange+'][A-Z][A-Z0-9][A-Z0-9] [0-9][A-Z][A-Z]%’, 8 UNION ALL SELECT ‘%['+@BlankRange+'][A-Z][A-Z][A-Z0-9][A-Z0-9] [0-9][A-Z][A-Z]%’, 9) AS f(Matched,TheLength) CROSS JOIN @AddressesWithPostCodes GROUP BY [address_ID] ) WORK; RETURN END GO ——————————-end of the function———————— IF NOT EXISTS (SELECT * FROM sys.objects WHERE name LIKE ‘ExtractPostcode’) BEGIN RAISERROR (‘There was an error creating the function.’,16,1) RETURN END /* now the job is only half done because we need to make sure that it works. So we now load our sample data, making sure that for each Sample, we have what we actually think the output should be. */ DECLARE @InputTable AddressesWithPostCodes INSERT INTO @InputTable(Address_ID,TheAddress) VALUES(1,’14 Mason mews, Awkward Hill, Bibury, Cirencester, GL7 5NH’), (2,’5 Binney St Abbey Ward Buckinghamshire HP11 2AX UK’), (3,‘BH6 3BE 8 Moor street, East Southbourne and Tuckton W Bournemouth UK’), (4,’505 Exeter Rd, DN36 5RP Hawerby cum BeesbyLincolnshire UK’), (5,”), (6,’9472 Lind St, Desborough Northamptonshire NN14 2GH NN14 3GH UK’), (7,’7457 Cowl St, #70 Bargate Ward Southampton SO14 3TY UK’), (8,”’The Pippins”, 20 Gloucester Pl, Chirton Ward, Tyne & Wear NE29 7AD UK’), (9,’929 Augustine lane, Staple Hill Ward South Gloucestershire BS16 4LL UK’), (10,’45 Bradfield road, Parwich Derbyshire DE6 1QN UK’), (11,’63A Northampton St, Wilmington Kent DA2 7PP UK’), (12,’5 Hygeia avenue, Loundsley Green WardDerbyshire S40 4LY UK’), (13,’2150 Morley St,Dee Ward Dumfries and Galloway DG8 7DE UK’), (14,’24 Bolton St, Broxburn, Uphall and Winchburg West Lothian EH52 5TL UK’), (15,’4 Forrest St, Weston-Super-Mare North Somerset BS23 3HG UK’), (16,’89 Noon St, Carbrooke Norfolk IP25 6JQ UK’), (17,’99 Guthrie St, New Milton Hampshire BH25 5DF UK’), (18,’7 Richmond St, Parkham Devon EX39 5DJ UK’), (19,’9165 laburnum St, Darnall Ward Yorkshire, South S4 7WN UK’) Declare @OutputTable OutputFormat –the table of what we think the correct results should be Declare @IncorrectRows OutputFormat –done for error reporting –here is the table of what we think the output should be, along with a few edge cases. INSERT INTO @OutputTable(Address_ID,TheAddress, ThePostcode) VALUES (1, ’14 Mason mews, Awkward Hill, Bibury, Cirencester, ‘,‘GL7 5NH’), (2, ’5 Binney St Abbey Ward Buckinghamshire UK’,‘HP11 2AX’), (3, ’8 Moor street, East Southbourne and Tuckton W Bournemouth UK’,‘BH6 3BE’), (4, ’505 Exeter Rd,Hawerby cum Beesby Lincolnshire UK’,‘DN36 5RP’), (5, ”,”), (6, ’9472 Lind St,Desborough Northamptonshire NN14 3GH UK’,‘NN14 2GH’), (7, ’7457 Cowl St, #70 Bargate Ward Southampton UK’,‘SO14 3TY’), (8, ”’The Pippins”, 20 Gloucester Pl, Chirton Ward,Tyne & Wear UK’,‘NE29 7AD’), (9, ’929 Augustine lane, Staple Hill Ward South Gloucestershire UK’,‘BS16 4LL’), (10, ’45 Bradfield road, ParwichDerbyshire UK’,‘DE6 1QN’), (11, ’63A Northampton St,Wilmington Kent UK’,‘DA2 7PP’), (12, ’5 Hygeia avenue, Loundsley Green WardDerbyshire UK’,‘S40 4LY’), (13, ’2150 Morley St, Dee Ward Dumfries and Galloway UK’,‘DG8 7DE’), (14, ’24 Bolton St,Broxburn, Uphall and Winchburg West Lothian UK’,‘EH52 5TL’), (15, ’4 Forrest St,Weston-Super-Mare North Somerset UK’,‘BS23 3HG’), (16, ’89 Noon St, Carbrooke Norfolk UK’,‘IP25 6JQ’), (17, ’99 Guthrie St, New Milton Hampshire UK’,‘BH25 5DF’), (18, ’7 Richmond St, Parkham Devon UK’,‘EX39 5DJ’), (19, ’9165 laburnum St, Darnall Ward Yorkshire, South UK’,‘S4 7WN’) insert into @IncorrectRows(Address_ID,TheAddress, ThePostcode) SELECT Address_ID,TheAddress,ThePostCode FROM dbo.ExtractPostcode(@InputTable) EXCEPT SELECT Address_ID,TheAddress,ThePostCode FROM @outputTable; If @@RowCount>0 Begin PRINT ‘The following rows gave ‘; SELECT Address_ID,TheAddress,ThePostCode FROM @IncorrectRows RAISERROR (‘These rows gave unexpected results.’,16,1); end /* For tear-down, we drop the user defined table type */ IF EXISTS(SELECT * FROM sys.types WHERE name LIKE ‘OutputFormat’ and schema_name(schema_ID)=‘Dbo’) DROP TYPE dbo.OutputFormat GO /* once this is working, the development work turns from a chore into a delight and one ends up hitting execute so much more often to catch mistakes as soon as possible. It also prevents a wildly-broken routine getting into a build! */

Read the article

The Return Of FILE And LINE In .NET 4.5

- by Alois Kraus

Good things are hard to kill. One of the most useful predefined compiler macros in C/C++ were __FILE__ and __LINE__ which do expand to the compilation units file name and line number where this value is encountered by the compiler. After 4.5 versions of .NET we are on par with C/C++ again. It is of course not a simple compiler expandable macro it is an attribute but it does serve exactly the same purpose. Now we do get CallerLineNumberAttribute == __LINE__ CallerFilePathAttribute == __FILE__ CallerMemberNameAttribute == __FUNCTION__ (MSVC Extension) The most important one is CallerMemberNameAttribute which is very useful to implement the INotifyPropertyChanged interface without the need to hard code the name of the property anymore. Now you can simply decorate your change method with the new CallerMemberName attribute and you get the property name as string directly inserted by the C# compiler at compile time. public string UserName { get { return _userName; } set { _userName=value; RaisePropertyChanged(); // no more RaisePropertyChanged(“UserName”)! } } protected void RaisePropertyChanged([CallerMemberName] string member = "") { var copy = PropertyChanged; if(copy != null) { copy(new PropertyChangedEventArgs(this, member)); } } Nice and handy. This was obviously the prime reason to implement this feature in the C# 5.0 compiler. You can repurpose this feature for tracing to get your hands on the method name of your caller along other stuff very fast now. All infos are added during compile time which is much faster than other approaches like walking the stack. The example on MSDN shows the usage of this attribute with an example public static void TraceMessage(string message, [CallerMemberName] string memberName = "", [CallerFilePath] string sourceFilePath = "", [CallerLineNumber] int sourceLineNumber = 0) { Console.WriteLine("Hi {0} {1} {2}({3})", message, memberName, sourceFilePath, sourceLineNumber); } When I do think of tracing I do usually want to have a API which allows me to Trace method enter and leave Trace messages with a severity like Info, Warning, Error When I do print a trace message it is very useful to print out method and type name as well. So your API must either be able to pass the method and type name as strings or extract it automatically via walking back one Stackframe and fetch the infos from there. The first glaring deficiency is that there is no CallerTypeAttribute yet because the C# compiler team was not satisfied with its performance. A usable Trace Api might therefore look like enum TraceTypes { None = 0, EnterLeave = 1 << 0, Info = 1 << 1, Warn = 1 << 2, Error = 1 << 3 } class Tracer : IDisposable { string Type; string Method; public Tracer(string type, string method) { Type = type; Method = method; if (IsEnabled(TraceTypes.EnterLeave,Type, Method)) { } } private bool IsEnabled(TraceTypes traceTypes, string Type, string Method) { // Do checking here if tracing is enabled return false; } public void Info(string fmt, params object[] args) { } public void Warn(string fmt, params object[] args) { } public void Error(string fmt, params object[] args) { } public static void Info(string type, string method, string fmt, params object[] args) { } public static void Warn(string type, string method, string fmt, params object[] args) { } public static void Error(string type, string method, string fmt, params object[] args) { } public void Dispose() { // trace method leave } } This minimal trace API is very fast but hard to maintain since you need to pass in the type and method name as hard coded strings which can change from time to time. But now we have at least CallerMemberName to rid of the explicit method parameter right? Not really. Since any acceptable usable trace Api should have a method signature like Tracexxx(… string fmt, params [] object args) we not able to add additional optional parameters after the args array. If we would put it before the format string we would need to make it optional as well which would mean the compiler would need to figure out what our trace message and arguments are (not likely) or we would need to specify everything explicitly just like before . There are ways around this by providing a myriad of overloads which in the end are routed to the very same method but that is ugly. I am not sure if nobody inside MS agrees that the above API is reasonable to have or (more likely) that the whole talk about you can use this feature for diagnostic purposes was not a core feature at all but a simple byproduct of making the life of INotifyPropertyChanged implementers easier. A way around this would be to allow for variable argument arrays after the params keyword another set of optional arguments which are always filled by the compiler but I do not know if this is an easy one. The thing I am missing much more is the not provided CallerType attribute. But not in the way you would think of. In the API above I did add some filtering based on method and type to stay as fast as possible for types where tracing is not enabled at all. It should be no more expensive than an additional method call and a bool variable check if tracing for this type is enabled at all. The data is tightly bound to the calling type and method and should therefore become part of the static type instance. Since extending the CLR type system for tracing is not something I do expect to happen I have come up with an alternative approach which allows me basically to attach run time data to any existing type object in super fast way. The key to success is the usage of generics. class Tracer<T> : IDisposable { string Method; public Tracer(string method) { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public void Dispose() { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public static void Info(string fmt, params object[] args) { } /// <summary> /// Every type gets its own instance with a fresh set of variables to describe the /// current filter status. /// </summary> /// <typeparam name="T"></typeparam> internal class TraceData<UsingType> { internal static TraceData<UsingType> Instance = new TraceData<UsingType>(); public bool IsInitialized = false; // flag if we need to reinit the trace data in case of reconfigured trace settings at runtime public TraceTypes Enabled = TraceTypes.None; // Enabled trace levels for this type } } We do not need to pass the type as string or Type object to the trace Api. Instead we define a generic Api that accepts the using type as generic parameter. Then we can create a TraceData static instance which is due to the nature of generics a fresh instance for every new type parameter. My tests on my home machine have shown that this approach is as fast as a simple bool flag check. If you have an application with many types using tracing you do not want to bring the app down by simply enabling tracing for one special rarely used type. The trace filter performance for the types which are not enabled must be therefore the fasted code path. This approach has the nice side effect that if you store the TraceData instances in one global list you can reconfigure tracing at runtime safely by simply setting the IsInitialized flag to false. A similar effect can be achieved with a global static Dictionary<Type,TraceData> object but big hash tables have random memory access semantics which is bad for cache locality and you always need to pay for the lookup which involves hash code generation, equality check and an indexed array access. The generic version is wicked fast and allows you to add more features to your tracing Api with minimal perf overhead. But it is cumbersome to write the generic type argument always explicitly and worse if you do refactor code and move parts of it to other classes it might be that you cannot configure tracing correctly. I would like therefore to decorate my type with an attribute [CallerType] class Tracer<T> : IDisposable to tell the compiler to fill in the generic type argument automatically. class Program { static void Main(string[] args) { using (var t = new Tracer()) // equivalent to new Tracer<Program>() { That would be really useful and super fast since you do not need to pass any type object around but you do have full type infos at hand. This change would be breaking if another non generic type exists in the same namespace where now the generic counterpart would be preferred. But this is an acceptable risk in my opinion since you can today already get conflicts if two generic types of the same name are defined in different namespaces. This would be only a variation of this issue. When you do think about this further you can add more features like to trace the exception in your Dispose method if the method is left with an exception with that little trick I did write some time ago. You can think of tracing as a super fast and configurable switch to write data to an output destination or to execute alternative actions. With such an infrastructure you can e.g. Reconfigure tracing at run time. Take a memory dump when a specific method is left with a specific exception. Throw an exception when a specific trace statement is hit (useful for testing error conditions). Execute a passed delegate which e.g. dumps additional state when enabled. Write data to an in memory ring buffer and dump it when specific events do occur (e.g. method is left with an exception, triggered from outside). Write data to an output device. …. This stuff is really useful to have when your code is in production on a mission critical server and you need to find the root cause of sporadic crashes of your application. It could be a buggy graphics card driver which throws access violations into your application (ok with .NET 4 not anymore except if you enable a compatibility flag) where you would like to have a minidump or you have reached after two weeks of operation a state where you need a full memory dump at a specific point in time in the middle of an transaction. At my older machine I do get with this super fast approach 50 million traces/s when tracing is disabled. When I do know that tracing is enabled for this type I can walk the stack by using StackFrameHelper.GetStackFramesInternal to check further if a specific action or output device is configured for this method which is about 2-3 times faster than the regular StackTrace class. Even with one String.Format I am down to 3 million traces/s so performance is not so important anymore since I do want to do something now. The CallerMemberName feature of the C# 5 compiler is nice but I would have preferred to get direct access to the MethodHandle and not to the stringified version of it. But I really would like to see a CallerType attribute implemented to fill in the generic type argument of the call site to augment the static CLR type data with run time data.

Read the article

SSH as root using public key still prompts for password on RHEL 6.1

- by Dean Schulze

I've generated rsa keys with cygwin ssh-keygen and copied them to the server with ssh-copy-id -i id_rsa.pub [email protected] I've got the following settings in my /etc/ssh/sshd_config file RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys PermitRootLogin yes When I ssh [email protected] it still prompts for a password. The output below from /usr/sbin/sshd -d says that a matching keys was found in the .ssh/authorized_keys file, but it still requires a password from the client. I've read a bunch of web postings about permissions on files and directories, but nothing works. Is it possible to ssh with keys in RHEL 6.1 or is this forbidden? The debug output from ssh and sshd is below. $ ssh -v [email protected] OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Connecting to my.ip.address [my.ip.address] port 22. debug1: Connection established. debug1: identity file /home/dschulze/.ssh/id_rsa type 1 debug1: identity file /home/dschulze/.ssh/id_rsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_dsa type 2 debug1: identity file /home/dschulze/.ssh/id_dsa-cert type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa type -1 debug1: identity file /home/dschulze/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 9f:00:e0:1e:a2:cd:05:53:c8:21:d5:69:25:80:39:92 debug1: Host 'my.ip.address' is known and matches the RSA host key. debug1: Found key in /home/dschulze/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/dschulze/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Offering DSA public key: /home/dschulze/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Trying private key: /home/dschulze/.ssh/id_ecdsa debug1: Next authentication method: password Here is the server output from /usr/sbin/sshd -d [root@ga2-lab .ssh]# /usr/sbin/sshd -d debug1: sshd version OpenSSH_5.3p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 172.60.254.24 port 53401 debug1: Client protocol version 2.0; client software version OpenSSH_6.1 debug1: match: OpenSSH_6.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user root service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "root" debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 1 failures 0 debug1: test whether pkalg/pkblob are acceptable debug1: PAM: setting PAM_RHOST to "172.60.254.24" debug1: PAM: setting PAM_TTY to "ssh" debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 Postponed publickey for root from 172.60.254.24 port 53401 ssh2 debug1: userauth-request for user root service ssh-connection method publickey debug1: attempt 2 failures 0 debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: trying public key file /root/.ssh/authorized_keys debug1: fd 4 clearing O_NONBLOCK debug1: matching key found: file /root/.ssh/authorized_keys, line 1 Found matching RSA key: db:b3:b9:b1:c9:df:6d:e1:03:5b:57:d3:d9:c4:4e:5c debug1: restore_uid: 0/0 debug1: ssh_rsa_verify: signature correct debug1: do_pam_account: called Accepted publickey for root from 172.60.254.24 port 53401 ssh2 debug1: monitor_child_preauth: root has been authenticated by privileged process debug1: temporarily_use_uid: 0/0 (e=0/0) debug1: ssh_gssapi_storecreds: Not a GSSAPI mechanism debug1: restore_uid: 0/0 debug1: SELinux support enabled debug1: PAM: establishing credentials PAM: pam_open_session(): Authentication failure debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_pty_req: session 0 alloc /dev/pts/1 ssh_selinux_setup_pty: security_compute_relabel: Invalid argument debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 17323 debug1: session_exit_message: session 0 channel 0 pid 17323 debug1: session_exit_message: release channel 0 debug1: session_pty_cleanup: session 0 release /dev/pts/1 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from 172.60.254.24: 11: disconnected by user debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: deleting credentials

Read the article

CodePlex Daily Summary for Saturday, October 20, 2012

CodePlex Daily Summary for Saturday, October 20, 2012Popular ReleasesP1 Port monitoring with Netduino Plus: V0.3 New release with new features: This V0.3 release that is made public on the 20th of October 2012 Third public version V0.3 A lot of work in better code, some parts are documented in the code S0 Pulse counter logic added for logging use or production of electricity Send data to PV Output for production of electricity Extra fields for COSM.com for more information Ability to enable or disable certain functionality before deploying to Netduino PlusMCEBuddy 2.x: MCEBuddy 2.3.3: 1. MCEBuddy now supports PIPE (2.2.15 style) and the newer remote TCP communication. This is to solve problems with faulty Ceton network drivers and some issues with older system related to load. When using LOCALHOST, MCEBuddy uses PIPE communication otherwise it uses TCP based communication. 2. UPnP is now disabled by Default since it interferes with some TV Tuner cards (CETON) that represent themselves as Network devices (bad drivers). Also as a security measure to avoid external connection...Pulse: Pulse 0.6.2.0: This is a roll-up of a bunch of features I've been working on for a while. I wasn't planning to release it but Wallbase.cc is broken in any version earlier then this! - Fixed Wallbase.cc provider - Multi-provider options. Now you can specify multiple input providers with different search options. - Providers have little icons now - More! Check it out and report any bugs! Having issues? Check the Known Errors page for solutions to commonly encountered problems. If you don't see the ...Orchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Common Data Parameters Module: CommonParam0.3H: Common Param has now been updated for VS2012 and NUnit 2.6.1. Conformance with the latest StyleCop has been maintained. If you need a version for VS2010, please use the previous version.????: ???_V2.0.0: ?????????????Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...WPUtils: WPUtils 1.3: Blend SDK for Silverlight provides a HyperlinkAction which is missing in Blend SDK for Windows Phone. This release adds such an action which makes use of WebBrowserTask to show web page. You can also bind the hyperlink to your view model. NOTE: Windows Phone SDK 7.1 or higher is required.Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.New ProjectsADFS 2.0 Attribute Store for SharePoint: ADFS 2.0 Attribute Store for SharePointALM Kickstarter: A simple Application Lifecycle Management Kickstart application written using ASP.NET MVC.Building iOS Apps with Team Foundation Server: An iPad sample project used for building iOS Xcode projects using a Team Foundation Server and the open source Jenkins build system. gyk-note: WTFHello World Fkollike: Test Project for fkollikeInnovacall ASP.net MVC 4 Azure Framework: Windows Azure Version of Innocacall ASP.net MVC 4 Framework. Intercom.Net: Intercom.Net is a C# library that provides easy tracking of customers to integration with the intercom.io CRM application. No need to learn yet another trackingjosephproject1: creating my first projectJust4Test: The project is just created for test.KBCruiser: KBCruiser helps developer to search reference or answers according to different resource categories: Forum/Blog/KB/Engine/Code/Downloadkp: store usernames/passwords from the commandline. ** Semi-secure, but by no means robust enough for production usage ** Troy Hunt would be disgusted.Neuron Operating System: Neuron Operating Systemnewelook: onesearch Pedestrian Simulation: Pedestrian simulationPTE: Using template Excel to generate UI for Prototyping.RequestModel: RequestModel is a simple implementation of typed access to a ASP.NET web forms request parametersSap: Sap is free, open-source web software that you can use to create a blog. Sap is made in ASP.NET MVC 4 (Razor). Sap is still pre-alpha and heavily in developmentSgart SharePoint 2010 Query Viewer: Windows application, based on the client object model of SharePoint 2010, that allows you to see the CAML query of a list view. Silverlight SuperLauncher: The Silverlight SuperLauncher project base on SL8.SL an Micosoft NESL.SL8.SL: The SL8.SL is a set of extension for silverlight. include mvvm,data validate,linq to sql, custom data page,oob helper etc. SL8.SL make easier to develop sl appSPDeployRetract: Easily Deploy and Retract SharePoint solutions using PowerShell. System Center Service Manager API: This API is for System Center Service Manager. It is written in C# and abstracts the more difficult aspects of service manager customization.TestingConf Utilities: This Framework will be helpful for testing and configuration purpose, so it has some methods that will be used as utilities that developers may need.The Veteran's Image Memory: his Project is been built for Educational purposes only . its not our Intention to offend anyone.Viking Effect: Viking Effect is a Brazilian website for the nerd people. We will offer news, tales and the Viking Scream, our take on the Podcast.Weather Report Widget: WPF-based application for displaying temperature, wind direction and speed for the selected city.WorldsCricket: WorldsCricket is a website which gives information on Cricket history with different cricket format, World’s cricketers, International Cricket Teams etc...XendApp - API: XendApp is a eco system for sending messages from a computer/application to a device. A device could be a phone or tablet for example.

Read the article

CodePlex Daily Summary for Thursday, July 05, 2012

CodePlex Daily Summary for Thursday, July 05, 2012Popular ReleasesTaskScheduler ASP.NET: Release 2 - 1.1.0.0: Release 2 - Version 1.1.0.0 In this version the following features were added to the library: Event fired on all tasks end The ASP.NET project takes a example of management of scheduled tasks.Umbraco CMS: Umbraco 4.8.0 Beta: Whats newuComponents in the core Multi-Node Tree Picker, Multiple Textstring, Slider and XPath Lists Easier Lucene searching built in IFile providers for easier file handling Updated 3rd party libraries Applications / Trees moved out of the database SQL Azure support added Various bug fixes Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to...CODE Framework: 4.0.20704.0: See CODE Framework (.NET) Change Log for changes in this version.?????????? - ????????: All-In-One Code Framework ??? 2012-07-04: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ???OneCode??????，??????????10????Microsoft OneCode Sample，????4?Windows Base Sample，2?XML Sample?4?ASP.NET Sample。???????????。 ????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Windows Base Sample CSCheckOSBitness VBCheckOSBitness CSCheckOSVersion VBCheckOSVersion XML Sample CSXPath VBXPath ASP.NET Sample CSASPNETDataPager VBASPNET...sheetengine - Isometric HTML5 JavaScript Display Engine: sheetengine v1.0: The first release of sheetengine. See sheetengine.codeplex.com for a list of features and examples.AssaultCube Reloaded: 2.5.1 Intrepid Fixed: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) If you use the default maprot or any maprot, you need to fix it Well, 2.5 was...xUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net 1.9.1: xUnit.net release 1.9.1Build #1600 Important note for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. Important note for VS2012 users: The VS2012 runner is in the Visual Studio Gallery now, and should be installed via Tools | Extension Manager from insi...NETDeob0: NETDeob 0.2.0: - Big structural changes - Safer signature identification - More accurate signatures - Minor bugs fixed - Minor compability issues fixedMVC Controls Toolkit: Mvc Controls Toolkit 2.2.0: Added Modified all Mv4 related features to conform with the Mvc4 RC Now all items controls accept any IEnumerable<T>(before just List<T> were accepted by most of controls) retrievalManager class that retrieves automatically data from a data source whenever it catchs events triggered by filtering, sorting, and paging controls move method to the updatesManager to move one child objects from a father to another. The move operation can be undone like the insert, update and delete operatio...BlackJumboDog: Ver5.6.6: 2012.07.03 Ver5.6.6 (1) ???????????ftp://?????????、????LIST?????Mini SQL Query: Mini SQL Query (v1.0.68.441): Just a bug fix release for when the connections try to refresh after an edit. Make sure you read the Quickstart for an introduction.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.58: Fix for Issue #18296: provide "ALL" value to the -ignore switch to ignore all error and warning messages. Fix for issue #18293: if encountering EOF before a function declaration or expression is properly closed, throw an appropriate error and don't crash. Adjust the variable-renaming algorithm so it's very specific when renaming variables with the same number of references so a single source file ends up with the same minified names on different platforms. add the ability to specify kno...LogExpert: 1.4 build 4566: This release for the 1.4 version line contains various fixes which have been made some times ago. Until now these fixes were only available in the 1.5 alpha versions. It also contains a fix for: 710. Column finder (press F8 to show) Terminal server issues: Multiple sessions with same user should work now Settings Export/Import available via Settings Dialog still incomple (e.g. tab colors are not saved) maybe I change the file format one day no command line support yet (for importin...View Layout Replicator for Microsoft Dynamics CRM 2011: View Layout Replicator (1.0.1802.65): Add support for OSDP authenticationCommonLibrary.NET: CommonLibrary.NET 0.9.8.5 - Final Release: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. FluentscriptCommonLibrary.NET 0.9.8 contains a scripting language called FluentScript. Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?action=Edit&title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.5 - Final ReleaseApplication: FluentScript Versio...SharePoint 2010 Metro UI: SharePoint 2010 Metro UI8: Please review the documentation link for how to install. Installation takes some basic knowledge of how to upload and edit SharePoint Artifact files. Please view the discussions tab for ongoing FAQsnopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.60: Highlight features & improvements: • Significant performance optimization. • Use AJAX for adding products to the cart. • New flyout mini-shopping cart. • Auto complete suggestions for product searching. • Full-Text support. • EU cookie law support. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).THE NVL Maker: The NVL Maker Ver 3.51: http://download.codeplex.com/Download?ProjectName=nvlmaker&DownloadId=371510 ????：http://115.com/file/beoef05k#THE-NVL-Maker-ver3.51-sim.7z ????：http://www.mediafire.com/file/6tqdwj9jr6eb9qj/THENVLMakerver3.51tra.7z ======================================== ???? ======================================== 3.51 beta ???： ·?????????????????????? ·?????????，?????????0，?????????????????????? ·??????????????????????????? ·?????????????TJS????（EXP??） ·??4:3???，???????????????，??????????? ·?????????...????: ????2.0.3: 1、???????????。 2、????????。 3、????????????。 4、bug??，????。Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.0: User Right Licensing ContentType version 2.0.267.1New Projects$ME: a new kind of javascript library.NET Micro Framework Driver Library: .NET Micro Framework Driver Library This is just a library of classes that I have created that can be used by Micro Framework Devices. aishe: ?????????BoogieTools: The goal of this project is to provide editors and additional tools to improve working with the Microsoft Boogie language and tools.BWAPI-CLI: .NET wrapper for the Broodwar API (BWAPI) and Broodwar Terrain Analyzer (BWTA) written in C++/CLICoffee Survey Framework: Coffee Survey Framework is an extensible, XML-based ASP.NET 4.0 framework for building and maintaining tabular survey pages. Dauphine SmartControls for K2 blackpearl: SmartControls for K2 blackpearl simplifies the integration of K2 blackpearl processes with ASP.NET web forms. It is a collection of ASP.NET web controls with both design-time and run-time capabilities for code-less integration to K2 blackpearl processes. The underlying framework of SmartControls for K2 blackpearl can also be used to extend existing ASP.NET web controls with the same K2 blackpearl integration capabilities that it offers.Easy Full-Text Search Queries: Very lightweight class to convert user-friendly search queries into Microsoft SQL Server Full-Text Search queries. Gracefully handles errors in input query.EnvironmentCheck: A Windows Forms application which will read from an XML config a number of checks which need to be performed to verify that a server meets pre-reqs.Lindeberg edge detector: Just a simple program I wrote for 'Image processing fundamentals' course MesanAnsatte: Prosjekt for utforskning av .net. Multi-Touch Scrum tool: This is a application use to support Scrum software development, based on Microsoft Surface SDK 2.0.MyWCFService: This project is a simple explanation for WCF service, that can help you understand how the WCF works!!race4fun engine: Open source driving simulator. Modable engine for easy use. SchoolManagerMVC: School Management System, written in MVC3 with unity framework, DI unity and unit testsSharePoint Managed Metadata Claims Provider: Custom Claims Provider implementation for SharePoint. Claims Playground.SQL data access: .NET library for accessing a Microsoft SQL Server database.sqlscriptmover: Exports stored procedures, function, views, tables and triggers to individual files or imports same and attempts to create in designated database.

Read the article

CodePlex Daily Summary for Wednesday, November 07, 2012

CodePlex Daily Summary for Wednesday, November 07, 2012Popular ReleasesMetodología General Ajustada - MGA: 03.04.03: Cambios Parmenio: Ajustes al formato F02 de programación para que la sincronización de las grillas no afecte el guardado de los datos. Cambios John: Integración de código con cambios enviados por Parmenio. Generación de instaladores. Soporte técnico por correo electrónico, telefónico y en sitio.nAPI for Windows Phone: Naver Open API Library Assemblies and Source Codes: nAPI (Naver Open API Library) for Windows Family Tested on - Windows 8 (Windows Store App) - Windows Phone 7 - Windows Phone 8 (Emulator)X-tee.NET: Xtee.NET 1.0: Generaator ja teegidFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...PowerComboBox: PowerComboBox VB v1.0: Visual Basic source code class file.Edi: Themable Edi: Completed ExpressionDark theme Improved Error Handling and Reporting feature Refactored all views to be look-less controlsMFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...SSIS Expression Editor & Tester: Expression Editor and Tester v1.0.8.0: Getting Started Download and extract the files, no install required. The ExpressionEditor.zip download contains a folder for each SQL Server version. ExpressionEditor2005 ExpressionEditor2008 ExpressionEditor2012 Changes Fixed issues 32868 and 33291 raised by BIDS Helper users. No functional changes from previous release. Versions There are three versions included, all built from the same code with the same functionality, but each targeting a different release of SQL Server. The downlo...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesDyanamic Reports (RDLC) - SharePoint 2010 Visual WebPart: Initial Release: This is a Initial Release.HTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.ProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...New Projects"On the Fly Zip and Attach" Windows Live Writer Plugin: This is a windows live writer zipping plug-in that allows you to select files/folders and zip them on the fly that will appear as attachment inserts, while you are writing blogs. Find details @ my Blogs Site: [url: Blogs: http://www.geekscafe.net|http://www.geekscafe.net].NET Micro Framework Tools: Collection of tools usefull for creating Netduino and .NET Micro Framework applications.Aktina: Aktina is a game engine written in DirectX 11.AppHub: AppHub??????AppStore???，???????，?????????，?????????，????????????，??，???????，???????????、??、??、??????????????，???????。 ??????????，????。Calcula Calles: Calcula CallesCRM 2011 ASP.NET Membership Provider: The CRM 2011 ASP.NET Membership provider Contains a Membership and Role provider, which can be used in ASP.NET Applications and/or ASP.NET based CMS systems.CSharp Executor: Dynamically execute C# script files in the same way that you might use VB scripts.Deque (by Stephen Cleary): A simple double-ended queue (deque) in C#. Unit tested.DirST: Allows one to replicate a DIRectory STructure without copying files. Written in C#.DNNTaskManager69: Testing DNN Module DevelopmentEchelon OS: an Sister Project to Aza DOS and this one is meant to be as minimilistic as it can with a filesystem and text editorGeek Reader: Lector de noticias para windows 8. Se trata de un template que permite rápidamente construir una aplicación windows 8 store GIII_P2: projekt 2katas-gpa: Codigo de los coding dojo acerca de patrones de diseñoKendoUI: Demonstrations using Kendo UI Complete for ASP.NET MVCLTorrent: C# BitTorrent and peer-to-peer protocol implementation MECopter: A real summary will follow soon...Migrate AD Group Permissions in Sharepoint/WSS: Sharepoint AD Group Migration tool, allows conversion of AD security principals used in Sharepoint ACLs from source domain to destination domainNetSend Manager: NetSend Manager is an Asp.Net console which enables you to send windows popup messages over a domain network. Messages can be send to a single user or to a grouNONAME0: ?? ? ???????-?????? ??? ?????? ???? ?????? ???? ??? ?? ???????????????? ??? ? ?????? ??? ??????????npr2012: Projekt testowy Personal News Assistant: Vision: The Personal News Assistant is an application which collects information from different sources and informs the user either on demand or preventive.PGIrony - Tookit & Examples for AST Generation with Irony: A tool-kit to ease AST generation,, and further ease grammr construction, with Irony.Proboscis: A query provider to work against HBase. Will be developed against HBase on Windows Azure.Project13251106: papaProject13271106: sdgProjet IMA: rtjRenderCraft: This is an editor like a AMD's RenderMonkey. But this supports Direct3D 11.Rx (Reactive Extensions): The Reactive Extensions (Rx) is a library for composing asynchronous and event-based programs using observable sequences and LINQ-style query operators. Sanle: sanle project with c++Screener: Screen sharing software.SemantEx: Adds a validation wrapper around regular expressions, allowing you to automatically apply conditional logic to capture groups.SharePoint CAML Extensions: SharePoint CAML ExtensionsSilentPlace: Turn on silence mode when you are in a silence placeSmartMacros: SmartMacros allows developers to define macros in C# and use them inside other source code. These macros are much stronger and safer than C/C++ macros, therefore they're called "Smart" :-)SoundArea link grabber: Soundarea link grabber the script put a list of links in your clipboard.Time Tracker Kickstart: This project is currently a work-in-progress.TransparentImage: TransparentImage is a console application that converts BMPS into PNG files. TransparentImage is written in VB and supports drop n drag.Travis7: A Travis-CI client for Windows PhoneWindows 8 Accelerator: A set of components and controls to accelerate your Windows 8 and Windows Phone 8 application development.Windows and Windows Phone DNS Library: Simple DNS lookup library for Windows and Windows Phone applicationsWinJS Toolkit - JavaScript Toolkit for Windows 8: The WinJS Toolkit is a set of classes, helper functions and tools that help creating Windows Store applications in HTML5, CSS3 and JavaScript.WPF TB: Study WPF????????: ZJU software project homework,One part of the total stocktrade system.

Read the article

Remote host: can tracert, can telnet, cannot browse: what gives?

- by MacThePenguin

One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

Read the article

Changes to the LINQ-to-StreamInsight Dialect

- by Roman Schindlauer

In previous versions of StreamInsight (1.0 through 2.0), CepStream<> represents temporal streams of many varieties: Streams with ‘open’ inputs (e.g., those defined and composed over CepStream<T>.Create(string streamName) Streams with ‘partially bound’ inputs (e.g., those defined and composed over CepStream<T>.Create(Type adapterFactory, …)) Streams with fully bound inputs (e.g., those defined and composed over To*Stream – sequences or DQC) The stream may be embedded (where Server.Create is used) The stream may be remote (where Server.Connect is used) When adding support for new programming primitives in StreamInsight 2.1, we faced a choice: Add a fourth variety (use CepStream<> to represent streams that are bound the new programming model constructs), or introduce a separate type that represents temporal streams in the new user model. We opted for the latter. Introducing a new type has the effect of reducing the number of (confusing) runtime failures due to inappropriate uses of CepStream<> instances in the incorrect context. The new types are: IStreamable<>, which logically represents a temporal stream. IQStreamable<> : IStreamable<>, which represents a queryable temporal stream. Its relationship to IStreamable<> is analogous to the relationship of IQueryable<> to IEnumerable<>. The developer can compose temporal queries over remote stream sources using this type. The syntax of temporal queries composed over IQStreamable<> is mostly consistent with the syntax of our existing CepStream<>-based LINQ provider. However, we have taken the opportunity to refine certain aspects of the language surface. Differences are outlined below. Because 2.1 introduces new types to represent temporal queries, the changes outlined in this post do no impact existing StreamInsight applications using the existing types! SelectMany StreamInsight does not support the SelectMany operator in its usual form (which is analogous to SQL’s “CROSS APPLY” operator): static IEnumerable<R> SelectMany<T, R>(this IEnumerable<T> source, Func<T, IEnumerable<R>> collectionSelector) It instead uses SelectMany as a convenient syntactic representation of an inner join. The parameter to the selector function is thus unavailable. Because the parameter isn’t supported, its type in StreamInsight 1.0 – 2.0 wasn’t carefully scrutinized. Unfortunately, the type chosen for the parameter is nonsensical to LINQ programmers: static CepStream<R> SelectMany<T, R>(this CepStream<T> source, Expression<Func<CepStream<T>, CepStream<R>>> streamSelector) Using Unit as the type for the parameter accurately reflects the StreamInsight’s capabilities: static IQStreamable<R> SelectMany<T, R>(this IQStreamable<T> source, Expression<Func<Unit, IQStreamable<R>>> streamSelector) For queries that succeed – that is, queries that do not reference the stream selector parameter – there is no difference between the code written for the two overloads: from x in xs from y in ys select f(x, y) Top-K The Take operator used in StreamInsight causes confusion for LINQ programmers because it is applied to the (unbounded) stream rather than the (bounded) window, suggesting that the query as a whole will return k rows: (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) The use of SelectMany is also unfortunate in this context because it implies the availability of the window parameter within the remainder of the comprehension. The following compiles but fails at runtime: (from win in xs.SnapshotWindow() from x in win orderby x.A select win).Take(k) The Take operator in 2.1 is applied to the window rather than the stream: Before After (from win in xs.SnapshotWindow() from x in win orderby x.A select x.B).Take(k) from win in xs.SnapshotWindow() from b in (from x in win orderby x.A select x.B).Take(k) select b Multicast We are introducing an explicit multicast operator in order to preserve expression identity, which is important given the semantics about moving code to and from StreamInsight. This also better matches existing LINQ dialects, such as Reactive. This pattern enables expressing multicasting in two ways: Implicit Explicit var ys = from x in xs where x.A > 1 select x; var zs = from y1 in ys from y2 in ys.ShiftEventTime(_ => TimeSpan.FromSeconds(1)) select y1 + y2; var ys = from x in xs where x.A > 1 select x; var zs = ys.Multicast(ys1 => from y1 in ys1 from y2 in ys1.ShiftEventTime(_ => TimeSpan.FromSeconds(1)) select y1 + y2; Notice the product translates an expression using implicit multicast into an expression using the explicit multicast operator. The user does not see this translation. Default window policies Only default window policies are supported in the new surface. Other policies can be simulated by using AlterEventLifetime. Before After xs.SnapshotWindow( WindowInputPolicy.ClipToWindow, SnapshotWindowInputPolicy.Clip) xs.SnapshotWindow() xs.TumblingWindow( TimeSpan.FromSeconds(1), HoppingWindowOutputPolicy.PointAlignToWindowEnd) xs.TumblingWindow( TimeSpan.FromSeconds(1)) xs.TumblingWindow( TimeSpan.FromSeconds(1), HoppingWindowOutputPolicy.ClipToWindowEnd) Not supported … LeftAntiJoin Representation of LASJ as a correlated sub-query in the LINQ surface is problematic as the StreamInsight engine does not support correlated sub-queries (see discussion of SelectMany). The current syntax requires the introduction of an otherwise unsupported ‘IsEmpty()’ operator. As a result, the pattern is not discoverable and implies capabilities not present in the server. The direct representation of LASJ is used instead: Before After from x in xs where (from y in ys where x.A > y.B select y).IsEmpty() select x xs.LeftAntiJoin(ys, (x, y) => x.A > y.B) from x in xs where (from y in ys where x.A == y.B select y).IsEmpty() select x xs.LeftAntiJoin(ys, x => x.A, y => y.B) ApplyWithUnion The ApplyWithUnion methods have been deprecated since their signatures are redundant given the standard SelectMany overloads: Before After xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count()) xs.GroupBy(x => x.A).SelectMany( gs => from win in gs.SnapshotWindow() select win.Count()) xs.GroupBy(x => x.A).ApplyWithUnion(gs => from win in gs.SnapshotWindow() select win.Count(), r => new { r.Key, Count = r.Payload }) from x in xs group x by x.A into gs from win in gs.SnapshotWindow() select new { gs.Key, Count = win.Count() } Alternate UDO syntax The representation of UDOs in the StreamInsight LINQ dialect confuses cardinalities. Based on the semantics of user-defined operators in StreamInsight, one would expect to construct queries in the following form: from win in xs.SnapshotWindow() from y in MyUdo(win) select y Instead, the UDO proxy method is referenced within a projection, and the (many) results returned by the user code are automatically flattened into a stream: from win in xs.SnapshotWindow() select MyUdo(win) The “many-or-one” confusion is exemplified by the following example that compiles but fails at runtime: from win in xs.SnapshotWindow() select MyUdo(win) + win.Count() The above query must fail because the UDO is in fact returning many values per window while the count aggregate is returning one. Original syntax New alternate syntax from win in xs.SnapshotWindow() select win.UdoProxy(1) from win in xs.SnapshotWindow() from y in win.UserDefinedOperator(() => new Udo(1)) select y -or- from win in xs.SnapshotWindow() from y in win.UdoMacro(1) select y Notice that this formulation also sidesteps the dynamic type pitfalls of the existing “proxy method” approach to UDOs, in which the type of the UDO implementation (TInput, TOuput) and the type of its constructor arguments (TConfig) need to align in a precise and non-obvious way with the argument and return types for the corresponding proxy method. UDSO syntax UDSO currently leverages the DataContractSerializer to clone initial state for logical instances of the user operator. Initial state will instead be described by an expression in the new LINQ surface. Before After xs.Scan(new Udso()) xs.Scan(() => new Udso()) Name changes ShiftEventTime => AlterEventStartTime: The alter event lifetime overload taking a new start time value has been renamed. CountByStartTimeWindow => CountWindow

Search Results

Search found 34207 results on 1369 pages for 'query output'.

Page 586/1369 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593 | Next Page >

- by SharkWipf

- by James Michael Hare

- by ToStringTheory

- by dan.mcclary

- by Damian

- by Mat Keep

- by Mohamed Elgharabawy

- by Bugsik

- by Bethany Lapaglia

- by Oli

- by askubuntu7639

- by Phil Factor

- by Alois Kraus

- by Dean Schulze

- by MacThePenguin

- by Roman Schindlauer

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593 | Next Page >