Search Results

Search found 46295 results on 1852 pages for 'system messaging'.

Page 586/1852 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >

• Is there way to scan a registry hive on an attached USB drive?

  - by johnny

  I have a hard drive with a virus that I removed from a PC. I can scan the file system of it as an attached USB drive. But how do I scan the registry of that USB drive since it is not booted up like a regular hard drive? Thank you EDIT: To clarify, the USB drive was a regular hard drive in a PC that got infected. I cannot boot into the OS to run a scan. I removed it to attach it to a working PC so I can scan its file system. But, I cannot scan the registry of that hard drive because that drive is not booted up. The hard drive was a regular XP hard drive install that I removed to scan as an attached drive (with an adapter to make it a USB drive.)

  Read the article

• Resizing mysterious partition written by DDing an ISO file

  - by Jon

  I downloaded clonezilla and then wrote it to a USB flash drive with this: dd if=clonezilla.iso of=/dev/sdb I've confirmed that the system boots and clonezilla runs from the flash drive. I want to store a clonezilla backup on the same flash drive clonezilla is running on, but I tried it and ran out of space, so I started looking at how to resize the mysterious partition type that was generated from the ISO. fdisk -l /dev/sdb .... Device Boot Start End Blocks Id System /dev/sdb1 * 1 111 113664 17 Hidden HPFS/NTFS .... I've tried using ntfsresize from the Debian ntfsprogs package. I'm trying gparted next, but thought I'd ask here if anyone knows a neat way to resize a partition created on flash from a liveCD image. Thanks in advance Jon ps. Assume Debian 6 please.

  Read the article

• Possible capacitor plague - need help identifying

  - by cornjuliox

  I've been having some PC power issues lately, and I think I've tracked it down to a bad power supply. Lately, when I'm on my PC it will often restart without warning, displaying "Hypertransport sync flood error occurred last boot." once POST finishes. I've googled the error, but can't come to a definitive conclusion as to what's causing it. I've seen posts suggesting that it might be a power supply issue, but nothing conclusive. Here's what I've done so far: -I haven't installed anything suspect within the last 3 months. -I do overclock just a tiny bit, so I tried raising the voltages a little. That didn't work so I brought both CPU multiplier and voltages all back to their default settings, but that didn't solve the problem either. The problem still occurs. -AV scanned the whole system, nothing suspect. -I suspected that it might be a bad power supply so I cracked that open and found the following: I think it might be cap plague, but I'm not sure. It looks more like glue TBH. Could someone help me figure out what might be wrong with this PC? EDIT: Sometimes, after these restarts, I noticed that the GPU fan doesn't spin up, and the single rear case fan that just happens to be connected to the same molex Y-cable as the GFX card doesn't spin up either. Anything to that? EDIT 2: I do use the system quite heavily, but I don't know how that will factor into this. I often play Diablo 3 and EVE Online at the same time, frequently alt-tabbing between the two. I also have Firefox open in the background, sometimes with several tabs, and if I feel like it, I'll mute the in-game sound and open foobar2000 for better music. Could it be that I'm just pushing this thing too hard? EDIT 3: I also noticed something odd. Right before I experience these restarts, my monitor would suffer from very faint lines of static moving across the screen. The monitor is still very much useable, but it is very annoying. Following the restart it disappears, and then would gradually re-appear over the next few days, and then restarts again. I find it to be very odd. System specs for good measure: Orion 600 W PSU AMD Athlon II X3 440 (overclocked to 3.14 ghZ, raised the CPU multiplier to x13 from x10) MSI G40-775 motherboard 1 GB inno3D GTX 550 ti 4 GB DDR3 RAM 500 GB Samsung SATA HD

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Modifying %HOME% on Emacs 24.3 on Windows causes .emacs to not be found

  - by David

  In order for magit to read my git settings on Emacs 24.3.1 for Windows, I added the following configuration from a stack overflow post: (when (string-equal system-type "windows-nt") (setenv "HOME" (concat (getenv "HOMEDRIVE") (getenv "HOMEPATH"))) Interestingly, after this is added to my .emacs, Emacs thinks .emacs doesn't exist anymore. If I do M-x cd to ~ and then do M-x pwd it says ~ is located at C:\Users\Me\AppData\Roaming. It appears that emacs is reading the .emacs settings file because it loads my custom theme. However, if I try to find ~/.emacs Emacs doesn't see it. The file has all permissions on the file system for any user.

  Read the article

• Rail's FileStore with Linux Disk Caching or RAMdisk?

  - by Yo Ludke

  I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

  Read the article

• Ubuntu: disable udev's persistent-net-generator.rules

  - by Luke404

  I'm using Ubuntu 12.04 LTS server edition and I am modifying /etc/udev/rules.d/70-persistent-net.rules to define my own mappings of ethernet interfaces to MAC addresses; that file is initially generated by rules in /lib/udev/rules.d/75-persistent-net-generator.rules at system installation time (or at the first boot, I actually don't know and it doesn't matter here). How can I be sure that my edited version will never ever be overwritten by anything? Removing the persistent-net-generator, as suggested on some websites, is not the Right Thing™ to do as told by comments in the file itself: it will be overwritten by any update of the udev package. I'm looking for a more formally correct way to disable it. Is it enough to just make sure that /etc/udev/rules.d/70-persistent-net.rules does exist? Maybe there are other events that could trigger its regeneration? (eg. adding or removing ethernet interfaces to the system?)

  Read the article

• OS X Snow Leopard, change file permissions on copy

  - by Francesco K

  I work with OS X, Snow Leopard and need to allow users to make copies of files (templates) located in a read-only repository for subsequent editing. The repository is located on a separate physical drive mounted to the OS X boot volume. As this is a shared computer in a school environment, all users access the machine via a single login ("user_local"). Whether using POSIX permissions or ACLs, the use case requires the file permissions to change from "read" to "read write" as they get copied to the "user_local" home directory. Googling around has not yielded anything that would indicate that this is possible via the Snow Leopard permission system. Question 1: Is this in fact possible via the permission system? If so, how? Question 2: If not possible, how would one go about solving this problem? I imagine this to be a fairly common use case so there must be a workable solution for it out there. Thanks.

  Read the article

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

  - by William Hooper

  My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

  Read the article

• Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

  - by Pro Backup

  In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

  Read the article

• How can I make gitosis distinguish between two users with the same username

  - by bryan kennedy

  I have a gitosis system that seems to be working correctly except for a common problem we run into where I can't distingush permissions between two users who have the same username, but different hosts. For example: [email protected] 's SSH key is in the key folder. And so is [email protected] 's SSH is also in the key folder. These two jsmith's are two different people on two different computers. However, when I configure them in the gitosis.conf file with the usernames jsmith@computer or jsmith@machine, it seems like each user just gets the same permission. Can gitosis not distinguish the full username (name and host)? If not, how do I deal with multiple users accessing our system with common usernames? Thanks for any help.

  Read the article

• How to read a Text File Hidden Characters?

  - by balexandre

  I've created a text file from an application that I developed. When I send the text file to a SYSTEM Validation, they (3rd Party System) say that the file is invalid and that the file contains 3 characters in the beginning of the file that are not allowed as well special characters are not correct. They also say I need to use either ISO 8859-1 or PC850 Well, I'm using Notepad++ and I can't see that at all! What is the best text file reader for this kind of problems? EDITED I also have a Mac and just thought I remembered opening in TextMate ... WOW! Now I know what they are talking about! How can I have the same in Windows?

  Read the article

• Allow users to view Word documents only and not be able to edit, copy or save them.

  - by Alexander

  Hello In a traditional Windows Server 2003 environment with AD, we have shared a folder for our policy documents (MS Word). These documents get edited/updated now and then by the administrator(principal of college). Users only have read-only access to the folder, but they can still save-as and then change the content. Sharepoint is a possible solution but not easy to implement. We also thought of using a CMS on Linux and installing Joomla to let users only view the docs with a document management system... but is it possible to automatically retrieve the policy folder on the network and convert or put it in a format that users can only view and not copy? We also thought of saving the docs to secure pdf format but the principal wants an automated system. Basically she just wants to work in Word and the policies must be available to staff members on the network. Any ideas? Much appreciated.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• WCF WebService: Client can't connect, as soon as request client cerficate is activated.

  - by Hinek

  I have an .NET 3.5 WCF WebService hostet in IIS 6 and using a SSL certificate. The communication between client and server works. Then I activate "request client certificate" and the client can't connect anymore Exception: System.ServiceModel.Security.SecurityNegotiationException: Could not establish secure channel for SSL/TLS with authority 'polizei-bv.stadt.hamburg.de'. Inner Exception: System.Net.WebException: The request was aborted: Could not create SSL/TLS secure channel. The certificate, the client uses is in the certificate store (local computer), the root ca is int the trusted root certification authorities store. Where can I check for an explanation on the server side? How can I check if the client really supplies it's certificate (client is not on my side)?

  Read the article

• Is it safe to enable forced ASLR via EMET on Windows?

  - by D.W.

  I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

  Read the article

• Can I uninstall Qmail when I switch to Gmail Apps

  - by Saif Bechan

  I am not going to run a mail server anymore on my system. I am going to switch to Gmail. Can I then just uninstall Qmail or my previous mail server programm. I want to be able to send email from PHP. And I also want to get the email that Logwatch sends me from within the system. Basically, to have your server send email do you need an email server? Or will Gmail cover all of this.

  Read the article

• flashcache with mdadm and LVM

  - by Backtogeek

  I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• Disabling networkmanager for a specific interface

  - by bdonlan

  I'd like to do some experimentation with hostap without disabling my primary wireless interface. How do I tell networkmanager to keep its hands off a specific interface or interfaces while allowing it to continue managing all other interfaces normally? I'm using Ubuntu 9.04. (Wasn't sure if this should go on superuser or serverfault, as networkmanager isn't much of a 'server' tool - if it belongs on serverfault please feel free to move it) Edit: I've tried adding this to /etc/network/interfaces: allow-hotplug wlan2 iface wlan2 inet static address 192.168.49.1 netmask 255.255.255.0 But this has no apparent effect, even after restarting NetworkManager. Here's my /etc/NetworkManager/nm-system-settings.conf: [main] plugins=ifupdown,keyfile [ifupdown] managed=false Edit[2]: Looks like I needed to restart nm-system-settings, then NetworkManager.

  Read the article

• Applescript Adobe Updater

  - by Alex

  So, I am new to Applescript editor and I am trying to write code to automatically update computers. For some odd reason I can not seem to get Adobe to update successfully. I tried using Accessibility Inspector, but nothing appeared like AXButton So is there even a way of writing code for Adobe when there is not an AXButton option? This is the code: tell application "Adobe Application Manager" activate end tell delay 7.0 tell application "System Events" tell process "Adobe Application Manager" click button "Update" of window "Adobe Application Manager" end tell end tell and this is the error message: error "System Events got an error: Can’t get button \"Update\" of window \"Adobe Application Manager\" of process \"Adobe Application Manager\"." number -1728 from button "Update" of window "Adobe Application Manager" of process "Adobe Application Manager

  Read the article

• GNU Screen and Finch Not Playing Nicely

  - by Sean M

  I use finch for instant messaging, and for persistence, finch is one of the things that runs in my screen session. There are three main computers that I access my screen session from, and each works at a different screen resolution. Because of the different resolutions, when I switch computers, I use screen -rd to attach to my screen session. Using screen -x results in problems. When I attach to the session, though, finch experiences display problems. I have to wait up to several minutes for finch to become responsive - it doesn't redraw properly at all. Trying to switch between chats just writes ^n and ^p, or ^(1-9) for numbers. It fixes itself after some time. Using ctrl-l does not help. Switching back and forth between screen windows does not help. This is an annoying behavior that I don't experience with any other applications running in screen. Is this a bug in screen or finch, and if not, what can I change about my configuration to correct it ? (would appreciate it if "finch" could be used as a tag for this instead of or in addition to "pidgin")

  Read the article

• unable to install oracle

  - by Mohamed Saligh

  I have installed oracle few months back. I was running fine in my local system. Unfortunately my friend has removed all the directories in safe mode. meaning to say it was not properly un-installed from my system. I tried to remove all the Registry keys, Services associated with oracle. Now, I can install it. Unable to use any sqlplus services or anything. How to completely remove my hidden old files and services if any. Need to install and use it. Any help indeed

  Read the article

• need recommendation for running PHP/Zend based optimizer

  - by senorsmile

  Firstly, I must admit that I don't know much about setting up PHP beyond the basics. I have an Ubuntu 10.04 server system (hosted) running primarily as an FTP store for a commercial store software. The server that the commercial store is installed on is unfortunately not very reliable, and would like to move that to this Ubuntu 10.04 server. (We've already received permission from the store vendor to do this.) My problem is that they use Zend optimizer which is only compatible with PHP 5.2. I have tried a couple of "hacks" to downgrade PHP to 5.2, but it breaks so many other things that it doesn't seem worth it. My idea is to install some sort of container of Ubuntu 8.04 (like OpenVZ) on the server to house a native install of PHP 5.2 to meet the dependency of the store software. However, it appears that OpenVZ is no longer supported on Ubuntu. Is there another solution similar that I could run on a hosted server to installed a separate "container-like" 8.04 system?

  Read the article

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >