Search Results

Search found 16415 results on 657 pages for 'computer'.

Page 587/657 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• Partition problem tyring to install window 7 starter

  - by ant2009

  Hello HP Mini 210 I am trying to install windows starter 7. Currently I have installed fedora 14 xfce. And I have allocated 24 GB NTFS for hard disk for the windows partition. My current partitions are as follows: /dev/sda2 97G 4.9G 91G 6% / tmpfs 494M 92K 494M 1% /dev/shm /dev/sda1 485M 68M 392M 15% /boot /dev/sda5 169G 26G 135G 16% /home I have created a boot USD to install windows starter 7. When the computer boots into the windows setup and I selected the partition I want to install windows on. I get the following message: "Setup was unable to create a new system partition or locate an existing system partition." This is setup displaying all my partitions: Disk 0 Partition 1 500MB 0 Primary Disk 0 Partition 2 97.7GB 0 Primary Disk 0 Partition 3 4GB 0 Primary Disk 0 Partition 4 171.3GB 0 Logical Disk 0 Partition 5 24.6GB 24.5 Logical <-- Trying install on this partition NTFS I have also tried to delete the partition in setup and create a new one. And also tried to format the partition. However, I still get the same error message. Many thanks for any advice,

  Read the article

• MySQL fault linked to windows shutdown failure?

  - by Roy

  As far as i understand my computer is experiencing a strange coincidence (hopefully it isn't and somebody can enlighten me). Basically i shut down my laptop (Windows 7) (at 17.20, today, to be precise) successfully (and so also did XAMPP and its included components). However upon starting my laptop up again in the last hour i noticed that the MySQL module service in my xampp control panel was not coming on (just a big red tick; incidentally everything else was working fine). Now, i had the exact same problem about two weeks ago, whereby i just reinstalled xampp and got it working again. But rather than doing this straight away i thought i would just restart my laptop first. However it won't restart (or shut down first) to be precise now. I can remember Windows wasn't shutting down properly the last time it happened (about two weeks ago). Just wondered if this coincidence pointed to any specific diagnostic as regards the problem with MYSQL? If so i would appreciate greatly any help. Otherwise sorry for wasting your time.

  Read the article

• Productive Writing Software

  - by Nick Retallack

  What do you guys use to write a personal journal, notes, and reference information that you want to group and search through later? I'm not one of those crazy people who likes to share their journal with the world. Some things I like to keep to myself. It's quite nice to have a reference. Preferences for cross-platform stuff (windows, mac, linux) Some Background For Windows, there's a program called Yeah Write, which really changed my expectations about how easy it should be to start writing something. You don't open or close files -- just click an empty slot and start writing, or click a filled slot to work on another file. And you can organize things into categories by creating tabs. Now that I carry a Macbook, I've just been using TextEdit. I like it because I can't lose my work when my computer crashes: it auto-saves everything and restores it when I launch TextEdit again. But I make a mess, leave thirty open files, and save everything to one directory with no tags for easy grouping. Saving files and selecting the directory they should be in is too clunky to do in the middle of a meeting. And organizing files into folders in the Finder is a pain, since there's no tree view like on Windows. Sure, I'm lazy, but I miss Yeah Write. I'm not going to get a windows laptop just to use it though. Since the laptop I take my notes on is a mac, I'm gonna be biased toward mac solutions.

  Read the article

• OS X Application icons missing after filesystem tampering

  - by dylan

  A while back I installed some Google software, I forget what it was, but it was something that attached itself to Google Chrome and was un-uninstallable short of uninstalling all of Chrome. It was a total pain in the a$$. Anyways, I was trying to put up a fight before going nuclear and just wiping Chrome, and during that fight, something went wrong (i.e., I didn't know what I was doing). I remember messing around with the Applications folder somehow. I don't remember what exactly I did, but it perhaps involved some interchanging between the /Applications and /User/Username/Applications folders? Definitely some tampering in those areas, I'm sure at least about that. Anyways, I've since updated and restarted my computer. Now, while all my apps work fine, many of them have blank icons - not on the Dock, those icons are fine, but in Spotlight search results, etc. Currently, my /Applications folder contains only OS X-cooked-in applications. My ~/Applications folder contains cooked in apps AND post-OS/third-party apps. There hasn't been any functionality deficit so far, but I don't like working on a machine where something isn't how it should be. I know my information was vague, but does anyone know what went wrong / how to fix it? OS X Mavericks 10.9.3

  Read the article

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• Ubuntu Launcher Items Don't Have Correct Environment Vars under NX

  - by ivarley

  I've got an environment variable issue I'm having trouble resolving. I'm running Ubuntu (Karmic, 9.10) and coming in via NX (NoMachine) on a Mac. I've added several environment variables in my .bashrc file, e.g.: export JAVA_HOME=$HOME/dev/tools/Linux/jdk/jdk1.6.0_16/ Sitting at the machine, this environment variable is available on the command line, as well as for apps I launch from the Main Menu. Coming in over NX, however, the environment variable shows up correctly on the command line, but NOT when I launch things via the launcher. As an example, I created a simple shell script called testpath in my home folder: #!/bin/sh echo $PATH && sleep 5 quit I gave it execute privileges: chmod +x testpath And then I created a launcher item in my Main Menu that simply runs: ./testpath When I'm sitting at the computer, this launcher runs and shows all the stuff I put into the $PATH variable in my .bashrc file (e.g. $JAVA_HOME, etc). But when I come in over NX, it shows a totally different value for the $PATH variable, despite the fact that if I launch a terminal window (still in NX), and type export $PATH, it shows up correctly. I assume this has to do with which files are getting loaded by the windowing system over NX, and that it's some other file. But I have no idea how to fix it. For the record, I also have a .profile file with the following in it: # if running bash if [ -n "$BASH_VERSION" ]; then # include .bashrc if it exists if [ -f "$HOME/.bashrc" ]; then . "$HOME/.bashrc" fi fi

  Read the article

• WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

  - by prayingpantis

  So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

  Read the article

• How to disable monitor auto detection in Windows 7?

  - by Jay Yother

  I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• VM load and ping problems after replacing server motherboard

  - by Andre

  Recently, we had to replace the motherboard of one of our servers. The procedure was done by IBM as it had guarantee. The server runs ESXi 5.1, with several virtual machines, including our main mail server (Domino) and a file server. After the replacing the motherboard and staring the VMs, ESXi asked us if we had moved it or copied (different motherboard is like a different computer). We clicked the latter. We started each machine and after some basic reconfiguration, all of them were up. However, we have been having problems with the mail server, it has been acting really slow at times (this could be when it syncs with the secondary mail server) and we have been checking with Centreon (a Nagios frontend) that its CPU load has been a bit high at times and ping response too. There was a moment this morning in which I tried connecting via SSH console and it was really slow to show login and basic commands like ifconfig and top. This particular mail server is a CentOS 4.4.7 64-bit. The little configuring we had to do after restarting it was to configure the network connection as it was resolving through DHCP. Our mail software is Lotus Notes server 9. Do you know of any way in which this replacement may be causing these difficulties, and how to fix it? Thanks.

  Read the article

• Windows 7 boot animation slows down startup by default?

  - by kngofwrld

  I just upgraded my HDD to an SSD drive. I am running a completely fresh install and enjoy the short boot time. I tweaked the startup to be as fast as I could by removing unneeded apps and such. Nor am I running a solid desktop background (which causes a 30-sec startup delay). I have a 2.1ghz 64 bit laptop with 4 gigs of ram, so it's not a liquid-cooled speed monster, but I checked some super high end PC boot vids on YouTube and noticed that they startup in almost the same time as my machine. I also noticed that the glowing Windows 7 animation plays all the way no matter how fast the PC is. I turned off the animation, and the startup time is unchanged. I turned on verbose startup info and noticed that it runs until the very end, where it looks like it just sits there for no reason waiting for something to happen for a few seconds. So now I think that the Windows 7 startup animation has a timer built into it that forces the computer to wait for no other reason than to play the full animation. Super-fast XP boot vids on YouTube seem to start much faster (and not just because they "have less to load"). Am I imagining things? My question is: How can I turn off not just the animation, but the timer for the animation. Here is a vid that tipped me off, I have no relation to the poster. (warning: soundtrack might be loud) http://www.youtube.com/watch?v=T5LkX3xejJ4

  Read the article

• retain last used path to location for saving files in Windows 7

  - by Mark Miller

  I am using Microsoft Office 2010 and Windows 7 on a Dell PC. I am opening a bunch of MSWord files one at a time, copying data tables therein, pasting the data into Excel and saving the Excel files as comma delimited text files. I am creating a separate Excel file for each MSWord file. The path to the folder containing the saved comma-delimited files is quite long, something like this: c:\users\me\aa\bb\cc\dd\ee\ Every time I open Excel and save a new comma-delimited file I have to re-navigate the entire path (c:\users\me\aa\bb\cc\dd\ee). In the past Windows seemed to remember the last used path, saving a lot of tedious key-strokes. In fact, I think Windows did this for me as recently as last week, albeit on a different computer. Can I apply a setting in Windows somewhere asking it to offer the last used path as a default when saving files so I do not have to re-navigate the entire directory structure to save each new comma-delimited file? If I can, how so? Where is the option for specifying that setting? Thank you for any help.

  Read the article

• A switch and router between the printer and PC that want to print but cannot

  - by Robert Memo

  IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

  Read the article

• Periodic internet connection drops

  - by user9647

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• is there a man in the middle attacking to my server machine?

  - by GongT

  My server works well about half a year. But a strange thing happened (several hours before). This server has two IP-address 58.17.85.19 & 117.21.178.19 When I navigate to http://58.17.85.19, nothing different as before. But http://117.21.178.19 will return a "302 Object moved" and become a "redirect loop" I do some test: ($cmd = "wget http://117.21.178.19/?xx=$RANDOM --max-redirect 0 -S --no-cache -O -") Step by step: run $cmd on my PC and my firend's one (we live in two side of China, far away). - got 302 run $cmd on this server - got 200 OK (content is correct result of index.php) run $cmd on another server in same computer room - got 200 OK telnet from my PC and build an HTTP request (type by hand) - got 200 OK shutdown php-fpm, run $cmd on my PC - got 302 run $cmd on server - 502 Bad Gateway shutdown nginx, run $cmd on both the server and my PC - Connection refused. create iptables rule, refuse any connection to 58.17.85.19:80. run nc -l 80 -k -vvv on server and run $cmd on my PC NC show me that.... Server accept connection (Connection from [my ip]) My connection closed ! (Remove fd xx from list) wget dump out response - got 302 I know that, normaly, NC will accept connection, then dump HTTP request from client, and client will wait for response. this connection will open forever(infact client will close connection becouse timeout), becouse NC can't give any response. So... where my request gone? who send an response to the client? some virus on my server system? If so, why 58.17.85.19 didn't has this error? or... I was attacked by a middleman?

  Read the article

• Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

  - by Phaedrus

  We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have everything working correctly except for 2 things: 1) Sometimes the login scripts don't run 2) The user VLAN is sometimes different than the machine vlan, and no DHCP renew occurs after user logon. I am clear that both these problems should be fixable by using the "Single Sign On" Option under the 802.1x Wireless Vista GPO, and setting the wireless to connect immediately before user logon and also by enabling "This network uses different VLAN for authentication with machine and user credentials" If I enable these GPO settings in a lab, the computer does authenticate & gets WIFI before the user logs on, so when the login box is displayed, it says “Windows will try to connect to ”, even though it is already connected (which should be ok?). Enter the user credentials and it goes to a screen saying “Connecting to ”, hangs for 10 seconds, fails with “Unable to connect to , Logging on…”. Desktop fires up and then the user re-authenticates with no problem as himself instead of the machine, but by that point, we defeat the point of the WiFi SSO “before user logon”. Also by that point, no DHCP renew seems to occur, and the user is still stuck with the wrong IP address for the new VLAN. When the “Connecting to ” screen comes up, there’s no indication on the AP or the Radius server that anything whatsoever is happening after credentials are entered until after the domain logon. Also with this policy enabled, sometimes windows hangs on a black screen indefinitely until I disable the Wireless NIC, so something is knackered for sure. What have I missed? Suggestions are much appreciated... /P

  Read the article

• Are email addresses mandatory for Windows 8 login names?

  - by Cedric Martin

  I've got a computer running Windows 8 and in the user accounts I can see four accounts (they're in french, here's a rough translation): [email protected] / administrator Veronique YYY / [email protected] ASP.NET Machine Account / local account guest account / the guest account is desactivated I've got several questions but they're all related to email addresses and login names / accounts. Are email addresses mandatory for Windows 8 login names? Can you mix live and non-live user accounts on a Windows 8 system? Is it possible to have a live Windows 8 user account which is not using a @live.xx email address? Is it possible to have a non-live Windows 8 user account which is using a @live.xx email address? If the gmail.com email address of the admin is not a live Windows 8 account, does this mean I can create a "fake" email and use that as the email of a new Windows 8 account? Basically I don't understand very well why there are email addresses displayed on the login screen and why there are both @live.xx and @gmail.com email addresses on the same system and answer to the questions I asked above may help me understand a bit better what is going on (I'm coming from a Linux / OS X background. I literally haven't used Windows in more than a decade).

  Read the article

• Server Intermittently Inaccessible Externally (but Accessible Internally Continuously)

  - by nicorellius

  I have a CRM on a server on a network. We have a static IP and another server outward facing. We use port-forwarding to map to the CRM, so that when you go to the IP or the FQDN, you get to the CRM: xxx.xxx.xxx.xxx crm.example.com Internally, we can access the CRM by going to crm or crm.example.com Lately, I've been noticing that accessing the server from outside the network times out or gives 503, bad gateway. During that time, I can also SSH (different port, so this works) into the outward facing computer and access the server just fine. I have a robot monitoring the site and indeed via HTTP monitoring the site is going down periodically. I looked through the Apache server access and error logs and nothing stuck out at me so I'm a bit confused as to what could be going on. I also searched the access logs for 503 and found nothing. When I run tracert from outside the network, it appears the packets basically make it through the wider area servers (Comcast city and county servers) and end up dropping at the CRM server's front step. I'm tempted to replace the server because it is older and underpowered but it would be nice to know what is going on. Any ideas what to do next?

  Read the article

• 2 routers at home- how to connect with VNC?

  - by Charles Leviton

  I have two routers at home. First router is upstairs and is connected to the cable modem. 2nd router is downstairs and acts as "signal booster" for the 1st router. Devices connected to the upstairs router have IP addresses of the form 192.168.1.n Devices connected to the upstairs router have IP addresses of the form 192.168.2.n. I blindly followed instructions from a website to do this set up, just glad it works! Upstairs I have a PC running Win 7 64 bit. Its assigned IP is 192.168.1.7. I have a VNC viewer running on this. Downstairs I have a 2nd PC running Vista 32 Home edition bit that is connected to the 2nd router and has IP Address 192.168.2.114. VNC server is running on this. It's listening on 5900. There is no firewall. When I try to connect to this downstairs PC from upstairs it fails with message "Failed to connect to server". I cannot ping to this either. If I try to connect to this downstairs PC using VNC Viewer from another computer that's connected to the same downstairs router then it works like a charm. So what's the work around if the viewer is on a different "network"? I don't have any problems doing remote desktop connection from the downstairs PC to the upstairs PC even if they are connected to different routers. Router information- Upstairs- ASUS RTN13U, downstairs- DD-WRT v24 RC-5 Thanks! P.S. I posted this on the Ultra VNC forum as well but that doesn't seem to have a lot of activity, so taking the liberty to multipost.

  Read the article

• Does anyone know where I could find a 2 input USB voltage meter?

  - by John O

  What we really need is a tiny UPS, of sorts. We'll be hooking up a solar cell and a battery to a single board computer. Currently, that SBC is a custom Pic32 device, and it does it's own UPS and voltage monitoring duties. I've been tasked with trying to replicate all of its features with off the shelf products... and for the most part I've succeeded. But I don't currently have any way to switch between two sources of juice, or monitor when they're getting low. These guys have something: http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system I really like it, the price is well within the budget. We might even work it in though it does 12V and I'll probably be using 5V... there are enough engineers on hand to figure out something. But I'd still have no idea what the voltage was for the PV or battery. I was hoping that there was some simple little USB multimeter thing that I could use to monitor this with, but I can't seem to come up with anything. I've found all sorts of cool hardware, but nothing that will help us. Does anyone know of anything?

  Read the article

• Could 0x800CCC0E in Outlook be caused by bad wireless connection?

  - by AndrejaKo

  I have a computer connected to a WiFi access point/router/modem. Sometimes, I get page not found errors and similar when opening a browser window, sometimes pings fail and it looks like the router's signal isn't very good. On the other hand, I get around 4 bars of signal strength in windows and graph looks good in Inssider. I also never get dropped connection to the router. My main problem is that I often get errors (such as 0x800CCC0E) in Outlook 2010 that after some searching appear to be connected to bad server connection. I'm using GMail over IMAP and all settings are correct. I didn't have similar errors on my previous router, but I'm not 100% sure that they appeared after switching to current one. It may have worked for some time without errors. There are also around 3000 messages on the server and the size of mailbox is around 12 GiB, which may contribute to the problems. On the other hand, there are at least 24 other networks in the 2.4 GHz range which I'm using and the number may have increased since I switched routers. Should I try solving this by getting a router with stronger signal?

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• How do I disable tablet gestures in windows 8?

  - by ???

  I'm using a Wacom Intuos4 and I have recently upgraded to Windows 8. I don't have a problem when using Photoshop however I occasionally draw on flash based online boards. The problem is, when I drag the pen in a direction repetitively (which is basically all I do when drawing) it's detected as a gesture, sometimes causing Chrome to go to the previous page (left drag) and making me lose the entire thing. Is there a way to disable these "gestures"? I believe this is not something caused by Windows 8 (or Charms) because I run Windows in English although it's not the initial language that Windows was installed in. I changed to English long after the installation. When Windows takes a move as a gesture, a small text pops up next to the cursor informing me about what I have just done and those pop ups are not even in English. I'm sorry for failing to be any more specific here but these gestures could be a feature of either Windows (unlikely), the tablet, Chrome or the computer itself. It's an Acer Aspire and it has one of those little stickers on it that specifies some of the features and one of them reads "Multi-Gesture" (referring to the touchpad, I guess). Could it be that this Multi-Gesture feature somehow decided to expand and apply for my tablet as well? If so, how do I disable it?

  Read the article

• Could replacing an old hard drive's circuit board make it work again?

  - by oscilatingcretin

  I have a 12-year-old, 10gb Maxtor drive that died on me around 7 years ago, but I have not had the heart to throw it away. When the computer powers on, it whirrs silently as it tries to spin up and then it stops. So, a few years ago, I sent it off for professional data recovery. They were able to retrieve quite a bit from it, but I know there's a bunch more there. It only cost $700, so I just chalked up the lackluster recovery effort to "you get what you pay for" considering that most companies will charge you several thousands of dollars for this kind of data recovery. When they sent the drive back, I couldn't help but plug it back in just to see if maybe they unjammed something in the process of disassembling/reassembling the drive. To my surprise, the drive had a much healthier spin-up sound and actually stayed spinning for several minutes before winding down to a halt. Windows is even able to detect and interact with the drive, but I get I/O errors after so many minutes of waiting for it to mount. Before I start doing stupid stuff with it like dropping it on the ground, freezing it, crapping on it, etc, I decided to buy the exact same model off Ebay so that I could swap the circuit boards as a last-ditch effort. While it's en route, I thought I'd come here to ask if this is even a worthwhile effort and, if even remotely so, what should I know before ripping off the old board and slapping on the new?

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >