Search Results

Search found 19768 results on 791 pages for 'hardware programming'.

Page 587/791 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

  - by Bjørnar Kibsgaard

  I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

  Read the article

• Series On Embedded Development (Part 3) - Runtime Optionality

  - by Darryl Mocek

  What is runtime optionality? Runtime optionality means writing and packaging your code in such a way that all of the features are available at runtime, but aren't loaded and used if the feature isn't used. The code is separate, and you can even remove the code to save persistent storage if you know the feature will not be used. In native programming terms, it's splitting your application into separate shared libraries so you only have to load what you're using, which means it only impacts volatile memory when enabled at runtime. All the functionality is there, but if it's not used at runtime, it's not loaded. A good example of this in Java is JVMTI, Java's Virtual Machine Tool Interface. On smaller, embedded platforms, these libraries may not be there. If the libraries are not there, there's no effect on the runtime as long as you don't try to use the JVMTI features. There is a trade-off between size/performance and flexibility here. Putting code in separate libraries means loading that code will take longer and it will typically take up more persistent space. However, if the code is rarely used, you can save volatile memory by including it in a separate library. You can also use this method in Java by putting rarely-used code into one or more separate JAR's. Loading a JAR and parsing it takes CPU cycles and volatile memory. Putting all of your application's code into a single JAR means more processing for that JAR. Consider putting rarely-used code in a separate library/JAR.

  Read the article

• Add copyright notice to a website

  - by PeeHaa

  Not really a programming question, but I find it related. If not (or you find this question too subjective), please tell me, yell at me, swear at me, kick me in the nuts, or just vote to close :) I've read some questions and answers here on SO about adding copyright notices, but not the specific ones I am looking for. I want to add a copyright notice to a website I created. Something like (c) Me 2010. All rights reserved. I am aware that everything written by someone is automatically copyrighted (if I'm not mistaken and perhaps depending on country laws). I see some sites use the following format for this (c) Me 2009-2010. However for me that makes no sense to add an 'end-date' to the notice. I am aware I can code to update the notice every year, but I just find it strange. Or is it just me? Another question is: I also use copyrighted code from others (they are all mentioned in the credits incl. links to their licenses ofc) on my site. Would it still be OK to add the copyright notice to the site with only Me in it? So to sum it up I have 2 questions: What is THE RIGHT WAYTM of adding a copyright notice on a website (or code or whatever)? If there is one. Is it allowed to copyright code with other copyrighted code within it?

  Read the article

• Are there design patterns or generalised approaches for particle simulations?

  - by romeovs

  I'm working on a project (for college) in C++. The goal is to write a program that can more or less simulate a beam of particles flying trough the LHC synchrotron. Not wanting to rush into things, me and my team are thinking about how to implement this and I was wondering if there are general design patterns that are used to solve this kind of problem. The general approach we came up with so far is the following: there is a World that holds all objects you can add objects to this world such as Particle, Dipole and Quadrupole time is cut up into discrete steps, and at each point in time, for each Particle the magnetic and electric forces that each object in the World generates are calculated and summed up (luckily electro-magnetism is linear). each Particle moves accordingly (using a simple estimation approach to solve the differential movement equations) save the Particle positions repeat This seems a good approach but, for instance, it is hard to take into account symmetries that might be present (such as the magnetic field of each Quadrupole) and is this thus suboptimal. To take into account such symmetries as that of the Quadrupole field, it would be much easier to (also) make space discrete and somehow store form of the Quadrupole field somewhere. (Since 2532 or so Quadrupoles are stored this should lead to a massive gain of performance, not having to recalculate each Quadrupole field) So, are there any design patterns? Is the World-approach feasible or is it old-fashioned, bad programming? What about symmetry, how is that generally taken into acount?

  Read the article

• Using a random string to authenticate HMAC?

  - by mrwooster

  I am designing a simple webservice and want to use HMAC for authentication to the service. For the purpose of this question we have: a web service at example.com a secret key shared between a user and the server [K] a consumer ID which is known to the user and the server (but is not necessarily secret) [D] a message which we wish to send to the server [M] The standard HMAC implementation would involve using the secret key [K] and the message [M] to create the hash [H], but I am running into issues with this. The message [M] can be quite long and tends to be read from a file. I have found its very difficult to produce a correct hash consistently across multiple operating systems and programming languages because of hidden characters which make it into various file formats. This is of course bad implementation on the client side (100%), but I would like this webservice to be easily accessible and not have trouble with different file formats. I was thinking of an alternative, which would allow the use a short (5-10 char) random string [R] rather than the message for autentication, e.g. H = HMAC(K,R) The user then passes the random string to the server and the server checks the HMAC server side (using random string + shared secret). As far as I can see, this produces the following issues: There is no message integrity - this is ok message integrity is not important for this service A user could re-use the hash with a different message - I can see 2 ways around this Combine the random string with a timestamp so the hash is only valid for a set period of time Only allow each random string to be used once Since the client is in control of the random string, it is easier to look for collisions I should point out that the principle reason for authentication is to implement rate limiting on the API service. There is zero need for message integrity, and its not a big deal if someone can forge a single request (but it is if they can forge a very large number very quickly). I know that the correct answer is to make sure the message [M] is the same on all platforms/languages before hashing it. But, taking that out of the equation, is the above proposal an acceptable 2nd best?

  Read the article

• How do you plan your asynchronous code?

  - by NullOrEmpty

  I created a library that is a invoker for a web service somewhere else. The library exposes asynchronous methods, since web service calls are a good candidate for that matter. At the beginning everything was just fine, I had methods with easy to understand operations in a CRUD fashion, since the library is a kind of repository. But then business logic started to become complex, and some of the procedures involves the chaining of many of these asynchronous operations, sometimes with different paths depending on the result value, etc.. etc.. Suddenly, everything is very messy, to stop the execution in a break point it is not very helpful, to find out what is going on or where in the process timeline have you stopped become a pain... Development becomes less quick, less agile, and to catch those bugs that happens once in a 1000 times becomes a hell. From the technical point, a repository that exposes asynchronous methods looked like a good idea, because some persistence layers could have delays, and you can use the async approach to do the most of your hardware. But from the functional point of view, things became very complex, and considering those procedures where a dozen of different calls were needed... I don't know the real value of the improvement. After read about TPL for a while, it looked like a good idea for managing tasks, but in the moment you have to combine them and start to reuse existing functionality, things become very messy. I have had a good experience using it for very concrete scenarios, but bad experience using them broadly. How do you work asynchronously? Do you use it always? Or just for long running processes? Thanks.

  Read the article

• Microsoft Lowers Cloud Barrier To Entry

  - by Herve Roggero

  Once in a while, the technology stack changes enough to create a disturbance in the IT industry. Microsoft did just that today and has officially closed the gap with its #1 competitor: Amazon. What is remarkable is that Microsoft is no longer an alternative to Amazon, it is becoming a clear leader in that space. Some of the new features include official support for durable Virtual Machines with high availability (cross-geographic replication), free WebSites to try Azure, MySQL database at no charge, a new distributed low-latency cache feature, Linux support, support with existing VPN hardware for seamless on-premise integration, a new partner ecosystem and much, much more. Amazon had an edge against Windows Azure in the IaaS (Infrastructure as a Service) space, until now. With the latest release from Microsoft Azure, the gap has been filled. In fact, it seems Amazon may now have a gap to fill… This is great news to everyone; it seems that cloud offerings are becoming more standardized with the more mature cloud providers, and the management stack and quality of service of each cloud provider is increasingly becoming the differentiator. With today’s announcements, it is becoming clear that cloud providers are pushing hard to increase their service footprint and lowering typical barriers to entry such as support for open-source operating systems, free trial offers, higher availability, faster deployment times and simpler enterprise integration.

  Read the article

• Inactive JSRs looking for Spec Leads

  - by heathervc

  You may have noticed that some JSRs have a classification of "Inactive" on their JSR page.  The introduction of this term in 2009 was part of an effort to enable and encourage more transparency into the development of JSRs.  You can read more about Inactive JSRs here and also in the JCP FAQ.The following JSR proposals have been Inactive since at least 2009. If you are a JCP Member and are interested in taking over the Specification Lead role for one of these JSRs, please contact the PMO at [email protected] on or before 23 April 2012. With that message, please include the following: the subject line "Spec Lead for JSR ###," where '###' is the JSR number which JCP Member you represent why you wish to take over the Specification lead role Here is the current list of Inactive JSRs for which Members can request to become Specification Leads: JSR 122, JAIN JCAT JSR 161, JAIN ENUM API Specification JSR 182, JPay - Payment API for the Java Platform JSR 210, OSS Service Quality Management API JSR 241, The Groovy Programming Language JSR 251, Pricing API JSR 278, Resource Management API for Java ME JSR 304, Mobile Telephony API v2 JSR 305, Annotations for Software Defect Detection JSR 320, Services Framework

  Read the article

• I cannot boot Ubuntu from WUBI install with windows 7, get an error message every time

  - by Tom

  i have tried several times to install ubuntu using wubi, i can't use a disc as i have a notebook computer and there is no optical drive. the download and installation all seem to work well but whenever i try to boot ubuntu at the windows 7/ubuntu menu it comes up with this error screen. I have used both the C: drive and the D: drive to install Ubuntu several times each, it's always unsuccessful. "Windows has failed to start. a recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer Choose your language settings and then click 'next' Click repair your computer. If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr Status: 0xc000000F Info: The selected entry could not be loaded because the application is missing or corrupt." I use an ASUS x501a with windows 7. What do i do to fix this? I want to be able to dual boot Windows 7 and ubuntu. Thanks a lot :)

  Read the article

• getting started as a web developer [closed]

  - by kmote

  I have over 10 years of programming experience building (Windows-based) desktop applications and utilities (VC++, C#, Python). My goal over the next year is to start transitioning to web application development. I want to teach myself the fundamental tools and technologies that would be considered essential for building professional, online, interactive, visually-stunning, data-driven web apps -- the kind described in Google's recently released "Field Guide: Building Great Web Applications". So my question is, what are the primary, most commonly-used technologies that seasoned professionals will need in their tool belt in the coming years? My plan was to start coming up to speed in Javascript, HTML5, & CSS, and then to do a deep dive into ASP.NET and Ajax, along with SQL DBs. (I was surprised to not be able to find a single book at Amazon with a broad, general scope like this, which caused me to start second-guessing this approach.) So, seasoned professionals: am I on the right track? Are there some glaring omissions in my list? Or some unnecessary inclusions? I would welcome any book suggestions along these lines as well.

  Read the article

• How to identify web development benchmarking questions? [closed]

  - by GenericJam

  I am in my final year of college and I have to put forward some sort of thesis for my final year project. The project is a web based attendance system that I am building for the college. I have it about 70% complete in Java. After completing it in Java, the plan is for me to rewrite the server bit in Erlang and then release the bitter rivals in a head to head cage match. The idea being that there is some sort of grounds for comparison. There are a few hurdles along the way, such as me learning Erlang. I understand that a performance comparison like this isn't strictly scientific as there are many factors such as the programmer (myself); the hardware it runs on; etc... but it is meant to be a reasonable comparison of the merits of using Java vs. Erlang for web development. I need help in identifying what the relevant questions are that my project could address. Even though the project scope is fixed, I am trying to shoehorn in some worthwhile scientific inquiries.

  Read the article

• Mix10 is in history, Windows Phone 7 is here!

  MIX10was really a fantastic conference for Telerik! We had great talks, many customers stopped by our booth and we've got a lot of great feedback for our Silverlight Controls. Thank you for stopping by and sharing your opinion! So now, that the MIX is over, there is one question left: What Telerik will develop for theWindows Phone 7? We had this question on the booth over and over again and it is no doubt that the WP7 development is a hot topic now. All we can sayat this momentis that Yes, we are looking into this and we actually have some of our controls already partially working with WP7 internally :) You know that the Silverlight version for WP7 is Silverlight 3 and it has some very good additions over it in order to support the phone hardware - like webcam, mic, accelerometer, etc. If you missed the conference and the sessions- here is a list of videos thatwill get you started: Building Windows Phone Applications with Silverlight, Part 1 Mike Harsh Building Windows Phone Applications with Silverlight, Part 2 Peter Torr The good thing isthat our controls will needvery few tweaks in order to be *compiled* against the WP7 Silverlight runtime. But, the more interesting part is actually what are the scenarios that our controls will be used in. How different they will be from the desktop version of the SL? This is where we need your feedback - drop as a line and let us know what are your expectations in this area. Do you need something specific, a feature or a new control that you like to use, or maybe you have a specific scenario that you want to share. Nowthe ball is in your hands - write on the forums, send us a ticket, or just leave your comment on WP7 developmentbelow! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Globacom and mCentric Deploy BDA and NoSQL Database to analyze network traffic 40x faster

  - by Jean-Pierre Dijcks

  In a fast evolving market, speed is of the essence. mCentric and Globacom leveraged Big Data Appliance, Oracle NoSQL Database to save over 35,000 Call-Processing minutes daily and analyze network traffic 40x faster.  Here are some highlights from the profile: Why Oracle “Oracle Big Data Appliance works well for very large amounts of structured and unstructured data. It is the most agile events-storage system for our collect-it-now and analyze-it-later set of business requirements. Moreover, choosing a prebuilt solution drastically reduced implementation time. We got the big data benefits without needing to assemble and tune a custom-built system, and without the hidden costs required to maintain a large number of servers in our data center. A single support license covers both the hardware and the integrated software, and we have one central point of contact for support,” said Sanjib Roy, CTO, Globacom. Implementation Process It took only five days for Oracle partner mCentric to deploy Oracle Big Data Appliance, perform the software install and configuration, certification, and resiliency testing. The entire process—from site planning to phase-I, go-live—was executed in just over ten weeks, well ahead of the four months allocated to complete the project. Oracle partner mCentric leveraged Oracle Advanced Customer Support Services’ implementation methodology to ensure configurations are tailored for peak performance, all patches are applied, and software and communications are consistently tested using proven methodologies and best practices. Read the entire profile here.

  Read the article

• Ubuntu 12.04 Fails to Boot after Reboot

  - by Joe

  I have installed Ubuntu 12.04 on several Dell c6220 servers. The install was successful and all hardware is recognized. The problem that I am running into is that when issuing the reboot command or when pressing ctrl-alt-del, the server shuts down, but never comes back up. Instead, the fan revs up to full speed and stays that way until I power the server down. Once the server has been powered down via the power button, Ubuntu will boot just fine -- until the next reboot. I have found that by rebooting the server via the DRAC web interface will reboot the server correctly. I have also found that this problem does not exist with CentOS -- I can press ctrl-alt-del all day long and it always comes back up. I've tried several kernel parameters such as: reboot=bios reboot=pci reboot=acpi reboot=cold acpi=off noapic Nothing seems to work. I have also tried upgrading to kernel 3.4, but no change there, either. Has anyone run into a similar problem or any pointers on troubleshooting? Thanks, Joe

  Read the article

• Find possible variations of one item out of multiple baskets.

  - by tugberk

  I have three baskets of balls and each of them has 10 balls which have the following numbers: Basket 1: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Basket 2: 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 Basket 3: 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 What would be the possible variations If I were to pick one ball from each basket? I guess this is called as Probability in Mathematics but not sure. How would you write this code in C# (or any other programming language) to get the correct results? Edit: Based on @Kilian Foth's comment, here is the solution in C#: class Program { static void Main(string[] args) { IEnumerable<string> basket1 = new List<string> { "1", "2", "3", "4", "5", "6", "7", "8", "9", "10" }; IEnumerable<string> basket2 = new List<string> { "11", "12", "13", "14", "15", "16", "17", "18", "19", "20" }; IEnumerable<string> basket3 = new List<string> { "21", "22", "23", "24", "25", "26", "27", "28", "29", "30" }; foreach (var item1 in basket1) foreach (var item2 in basket2) foreach (var item3 in basket3) { Console.WriteLine("{0}, {1}, {2}", item1, item2, item3); } Console.ReadLine(); } }

  Read the article

• Web dev/programmer with 4.5 yrs experience. Better for career: self-study or master's degree? [closed]

  - by Anonymous Programmer

  I'm a 28 year-old web developer/programmer with 4.5 years of experience, and I'm looking to jump-start my career. I'm trying to decide between self-study and a 1-year master's program in CS at a top school. I'm currently making 65K in a high cost-of-living area that is NOT a hot spot for technology firms. I code almost exclusively in Ruby/Rails, PHP/CodeIgniter, SQL, and JavaScript. I've slowly gained proficiency with Git. Roughly half the time I am architecting/coding, and half the time I am pounding out HTML/CSS for static brochureware sites. I'd like to make more more money while doing more challenging/interesting work, but I don't know where to start. I have an excellent academic record (math major with many CS credits, 3.9+ GPA), GRE scores, and recommendations, so I am confident that I could be admitted to a great CS master's program. On the other hand, there is the tuition and opportunity cost to consider. I feel like there are a number of practical languages/tools/skills worth knowing that I could teach myself - shell scripting, .NET, Python, Node.js, MongoDB, natural language processing techniques, etc. That said, it's one thing to read about a subject and another thing to have experience with it, which structured coursework provides. So, on to the concrete questions: What programming skills/knowledge should I develop to increase my earning potential and make me competitive for more interesting jobs? Will a master's degree in CS from a top school help me develop the above skills/knowledge, and if so, is it preferable to self-study (possibly for other reasons, e.g., the degree's value as a credential)?

  Read the article

• loss of sound in ubuntu 12.04

  - by Leo Simon

  I'm running Linux E6520 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux on a Dell Latitude E6530. (This is a new machine; have run the same version of linux on an older machine for a year, without this happening.) I've been losing sound regularly, though have not been able to isolate the trigger for this. I've scoured the web on this subject, in particular https://help.ubuntu.com/community/SoundTroubleshootingProcedure and Audio stopped working suddenly in 12.04 Nothing from the first site seemed to work for me. From the second site, I learned enough to be able to fix the problem when it happens, but nothing on the web has helped me figure out why the problem is happening in the first place. Patching together stuff from the web, and with some blind luck, I've found that the following steps seem to restore sound pulseaudio --kill pulseaudio --start pavucontrol -> output devices Click on the "Mute audio" icon, which mutes audio Click on the "Mute audio" icon, which unmutes audio. This obviously doesn't make sense: audio wasn't muted in the first place, but somehow, magically, toggling mute audio off and on seems to reset something. Can anybody suggest from this information why sound would be disappearing in the first place (it seems as though something is getting muted at the system level, but I don't know what)? a simpler (command-line/script) way of restoring sound, in particular, is it possible to reset pavucontrol from the commandline? Some other pieces of information that may be of use: The problem is clearly happening at the system level, since I've set up a clean new user, and this user has the same problems that I do. So user fixes like deleting the .pulse directory aren't (and don't) help. Sound works fine in Windows (dual-boot) so it's not a hardware problem Any help/suggestions on this would be most appreciated.

  Read the article

• Basic Mouse Features in Silverlight

  - by Sayre Collado

  Hi Guys, I have basic sample on how to use some features of mouse events in Silverlight. The picture. The Mouse Activity Log is to record the all activity done on the projects. My simple snippets on how to add on the textbox is:         protected void MessageLog(string msg)         {             txtMouseLog.Text += msg;         }   For the Mouse Wheel sample this is the snippets:         private void chkMouseWheel_Checked(object sender, RoutedEventArgs e)         {             image1.MouseWheel += new MouseWheelEventHandler(image1_MouseWheel);         }           void image1_MouseWheel(object sender, MouseWheelEventArgs e)         {             ImgScale.ScaleX = e.Delta > 0 ? ImgScale.ScaleX * 1.5 : ImgScale.ScaleX * 0.8;             ImgScale.ScaleY = e.Delta > 0 ? ImgScale.ScaleY * 1.5 : ImgScale.ScaleY * 0.8;               e.Handled = true;         }    And the XAML:        <Image Height="139" Name="image1" Stretch="Fill" Width="178" Source="/GBLOgs1;component/Images/Sunset.jpg">            <Image.RenderTransform>                 <ScaleTransform x:Name="ImgScale"></ScaleTransform>            </Image.RenderTransform>        </Image     I have also the showing of mouse position:           private void Mouse_MouseMove(object sender, MouseEventArgs e)         {             Point point = e.GetPosition(this);             lblMouseLocation.Content = "X: " + point.X + "and Y: " + point.Y;         }           private void checkBox1_Checked(object sender, RoutedEventArgs e)         {             lblMouseLocation.Visibility = Visibility.Visible;             MessageLog("Mouse Location Visible\n");         }           private void checkBox1_Unchecked(object sender, RoutedEventArgs e)         {             lblMouseLocation.Visibility = Visibility.Collapsed;             MessageLog("Mouse Location Collapsed\n");            And even the counting of clicked event:           int clicked = 0;         private void LayoutRoot_MouseLeftButtonDown(object sender, MouseButtonEventArgs e)         {             Point point = e.GetPosition(this);             clicked++;               string msg = "Mouse Clicked " + clicked.ToString() + " time(s) " +                                     "Mouse Location X and Y: " + point.X + " " + point.Y + "\n";               MessageLog(msg);         }     And now the result of above snippets. Happy Programming.

  Read the article

• Random compositing lag

  - by user1020567

  My laptop specs: 512 mb of RAM, out of which 64 mb are shared with an integrated GPU - ATI Radeon Xpress 200 M. Intel 1,6 Ghz Celeron M single-core processor. I've spent months trying to figure out why compositing and effects sometimes lag on any distro I try. Now I've come to realise that no matter what drivers I try (the default ones work for me on pretty much any linux) compositing lag is random. When I used Ubuntu 10.10, for example, sometimes window compositing would lag and sometimes it wouldn't. The PC is able to render those effects so hardware is not the problem. It's completely random and unpredictable - sometimes when I turn on the computer the effects lag horribly and sometimes it's completely smooth. I've also checked startup items and there doesn't seem to be any unnecessary entries. I also tried building my own OS with Arch Linux and the problem persists there, therefore I can only assume that it's a driver issue of some sort. By default there are lots of drivers supplied with linux distributions. Could it be that they're in the way? The ones that I need are ati/radeon (or both? What's the difference between them?) and there seem to be a lot of others... What should I do?

  Read the article

• Persisting high score table in flash game without a network. (Featuring: HttpListenerException)

  - by bearcdp

  Hi everyone, this question is very programming-centric, but it's for a game so I figured I might as well post it here. I'm doing polishing work on a GGJ '11 game because it will be shown at an indie arcade tomorrow afternoon, and they're expecting our final build in the morning. We'd like to have a high score table that displays during attract mode, but since it's Flash (Flixel) it would require some networking, Mochi, or something to keep a record of these scores. Only problem is the machine we'd be running on probably won't have network access. As a quick solution, I thought I'd just write up a dinky little high score server in C#/.NET that could take basic GET requests for submitting scores and getting the score list. We're talking REAL basic, like blocking while waiting for an incoming request, run & forget console app, etc. There's no guarantee that our .swf won't get reloaded, and we'd like the scores to persist, so this server would pretty much exists to keep a safe copy of the scores that the game can add to and request, and occasionally the server will write the scores to a flat text file. But, HttpListener is giving me Error Code 87 'The parameter is incorrect.' Have any idea what I'm doing wrong? Or better yet, am I barking up the wrong tree and missing an obviously simpler solution? This is all I've got so far in my Main(): HttpListener listener = new HttpListener(); listener.Prefixes.Add("http://localhost:66666/"); listener.Start(); The exception happens at listener.Start(); and the stack trace is: at System.Net.HttpListener.AddAllPrefixes() at System.Net.HttpListener.Start() at WOSEBCE_ScoreServer.Program.Main(String[] args) in C:\Users\Michael\Documents\Visual Studio 2010\VS2010 Projects\WOSEBCE_ScoreServer\WOSEBCE_ScoreServer\Program.cs:line 24 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()

  Read the article

• Engineered Systems and PCI

  - by Joel Weise

  Oracle has a number of different engineered systems.  These are design to be highly integrated, optimized and secure systems.  The Exadata database engineered system and the Exalogic application engineered system are two good examples.  Often I am asked how these comply with different standards and regulations.  Exalogic is the Oracle engineered system that supports applications and the focus of today's blog.  First, we must recognize that as a collection of hardware and software, we cannot simply state that Exalogic is "compliant" with PCI DSS.  This is because Exalogic must be implemented within the context of one's existing IT infrastructure, the security features of that infrastructure, the governance framework that exists, security policies, operational procedures, and other factors.  What we can say though, is that Exalogic has been designed with various security capabilities that can be utilized to support compliance to PCI DSS as well as other standards and regulations (e.g., NIST and HIPAA).  Given that, Exalogic can be an excellant platform for running PCI related payment applications.  Coalfire Systems, a leading QSA in the US, has evaluated Exalogic against PCI DSS and supports this position.  Their evaluation can be found here: Exalogic and PCI Compliance. I hope you find it useful. 

  Read the article

• Cannot connect to wireless network

  - by smr

  I am quite new to using Ubuntu 12.10. All I remember while installing Ubuntu 12.10 was that I didn't check any box specifically to enable wireless connectivity. I tried looking into the various questions posted here - most of them refer to certain commands (redundantly sudo) and things of that sort. I am quite new and wasn't sure of understanding what those commands were trying to do (the network configuration settings - showed up different options, like 'Wireless', 'Wired', 'IPv4', 'IPv6' etc -- I am not sure of what sort of settings are to be made - like for example what sort of 'WEP' settings etc are to be made. Although I wasn't able to connect to the wireless network, I was able to connect to the internet, once I plugged in the ethernet cable. Can someone help me with: 1) Understandng a way to see if Ubuntu is configured to connect to a wireless network. 2) If so - Getting to configure to a wireless network (setting up a new one). 3) Where in ubuntu, should I look for seeing if there are any hardware devices (such as the Broadcom wireless adapter or things of that sort - like the way we use the 'Device manager' in Windows to look into the adapter settings). 4) Reference material to learn and understand the various ubuntu commands. (things like the -lshw etc).

  Read the article

• How do you proactively guard against errors of omission?

  - by Gabriel

  I'll preface this with I don't know if anyone else who's been programming as long as I have actually has this problem, but at the very least, the answer might help someone with less xp. I just stared at this code for 5 minutes, thinking I was losing my mind that it didn't work: var usedNames = new HashSet<string>(); Func<string, string> l = (s) => { for (int i = 0; ; i++) { var next = (s + i).TrimEnd('0'); if (!usedNames.Contains(next)) { return next; } } }; Finally I noticed I forgot to add the used name to the hash set. Similarly, I've spent minutes upon minutes over omitting context.SaveChanges(). I think I get so distracted by the details that I'm thinking about that some really small details become invisible to me - it's almost at the level of mental block. Are there tactics to prevent this? update: a side effect of asking this was fixing the error it would have for i 9 (Thanks!) var usedNames = new HashSet<string>(); Func<string, string> name = (s) => { string result = s; if(usedNames.Contains(s)) for (int i = 1; ; result = s + i++) if (!usedNames.Contains(result)) break; usedNames.Add(result); return result; };

  Read the article

• JavaOne Technology Conference Is Coming to Russia

  - by Tori Wieldt

  JavaOne Russia 17-18 AprilRussian Academy of Sciences, MoscowRegister Now JavaOne and Oracle Develop 2012 Russia offers a wide variety of sessions, hands-on labs, keynotes, demos, and the opportunity to network with developer peers. If you’re looking for in-depth sessions on Java technologies and tools, this is the conference for you. Your registration also gets you into Oracle Develop sessions as well, so you can learn about application servers, cloud development and, of course, database development. The JavaOne Russia tracks are:Client-Side Technologies and Rich User ExperiencesLearn about developments in Java for the desktop and practices for building rich, immersive, and powerful user experiences across multiple hardware platforms and form factors. Core Java PlatformDiscover the latest innovations in Java virtual machines. Get deep technical explanations in security and networking and enhancements that allow dynamic programming languages to drive Java platform adoption. Java EE Web Profile, Platform Technologies, Web Services, and the Cloud Update your knowledge on topics such as Web application development, persistence, security, and transactions. This track will also address modularity, enterprise caching, Web sockets, and internet identity. Mobile, Java Card, Embedded, and DevicesThis track is devoted to Java technology as the ultimate platform for mobile computing. It also covers embedded and device usages of Java technologies, including Java SE, Java ME, Java Card, and JavaFX. Share this event: #oracleRU

  Read the article

• Use a SQL Database for a Desktop Game

  - by sharethis

  Developing a Game Engine I am planning a computer game and its engine. There will be a 3 dimensional world with first person view and it will be single player for now. The programming language is C++ and it uses OpenGL. Data Centered Design Decision My design decision is to use a data centered architecture where there is a global event manager and a global data manager. There are many components like physics, input, sound, renderer, ai, ... Each component can trigger and listen to events. Moreover, each component can read, edit, create and remove data. The question is about the data manager. Whether to Use a Relational Database Should I use a SQL Database, e.g. SQLite or MySQL, to store the game data? This contains virtually all game content like items, characters, inventories, ... Except of meshes and textures which are even more performance related, so I will keep them in memory. Is a SQL database fast enough to use it for realtime reading and writing game informations, like the position of a moving character? I also need to care about cross-platform compatibility. Aside from keeping everything in memory, what alternatives do I have? Advantages Would Be The advantages of using a relational database like MySQL would be the data orientated structure which allows fast computation. I would not need objects for representing entities. I could easily query data of objects near the player needed for rendering. And I don't have to take care about data of objects far away. Moreover there would be no need for savegames since the hole game state is saved in the database. Last but not least, expanding the game to an online game would be relative easy because there already is a place where the hole game state is stored.

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >