Search Results

Search found 15535 results on 622 pages for 'index buffer'.

Page 588/622 | < Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >

  • Cached ObjectDataSource not firing Select Event even Cache Dependecy Removed

    - by John Polvora
    I have the following scenario. A Page with a DetailsView binded to an ObjectDatasource with cache-enabled. The SelectMethod is assigned at Page_Load event, depending on my User Level Logic. After assigned the selectMethod and Parameters for the ODS, if Cache not exists, then ODS will be cached the first time. The next time, the cache will be applied to the ODS and the select event don't need to be fired since the dataresult is cached. The problem is, the ODS Cache works fine, but I have a Refresh button to clear the cache and rebind the DetailsView. Am I doing correctly ? Below is my code. <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="ObjectDataSource_Summary" EnableModelValidation="True" EnableViewState="False" ForeColor="#333333" GridLines="None"> </asp:DetailsView> <asp:ObjectDataSource ID="ObjectDataSource_Summary" runat="server" SelectMethod="" TypeName="BL.BusinessLogic" EnableCaching="true"> <SelectParameters> <asp:Parameter Name="idCompany" Type="String" /> <SelectParameters> </asp:ObjectDataSource> <asp:ImageButton ID="ImageButton_Refresh" runat="server" OnClick="RefreshClick" ImageUrl="~/img/refresh.png" /> And here is the code behind public partial class Index : Page { protected void Page_Load(object sender, EventArgs e) { ObjectDataSource_Summary.SelectMethod = ""; ObjectDataSource_Summary.SelectParameters[0].DefaultValue = ""; switch (this._loginData.UserLevel) //this is a struct I use for control permissions e pages behaviour { case OperNivel.SysAdmin: case OperNivel.SysOperator: { ObjectDataSource_Summary.SelectMethod = "SystemSummary"; ObjectDataSource_Summary.SelectParameters[0].DefaultValue = "0"; break; } case OperNivel.CompanyAdmin: case OperNivel.CompanyOperator: { ObjectDataSource_Summary.SelectMethod = "CompanySummary"; ObjectDataSource_Summary.SelectParameters[0].DefaultValue = this._loginData.UserLevel.ToString(); break; } default: break; } } protected void Page_LoadComplete(object sender, EventArgs e) { if (Cache[ObjectDataSource_Summary.CacheKeyDependency] == null) { this._loginData.LoginDatetime = DateTime.Now; Session["loginData"] = _loginData; Cache[ObjectDataSource_Summary.CacheKeyDependency] = _loginData; DetailsView1.DataBind(); } } protected void RefreshClick(object sender, ImageClickEventArgs e) { Cache.Remove(ObjectDataSource_Summary.CacheKeyDependency); } } Can anyone help me? The Select() Event of the ObjectDasource is not firing even I Remove the CacheKey Dependency

    Read the article

  • Make Div overlay ENTIRE page (not just viewport)??

    - by Polaris878
    Hello, So I have a problem that I think is quite common but I have yet to find a good solution for. I want to make an overlay div cover the ENTIRE page... NOT just the viewport. I don't understand why this is so hard to do... I've tried setting body, html heights to 100% etc but that isn't working. Here is what I have so far: <html> <head> <style type="text/css"> .OverLay { position: absolute; z-index: 3; opacity: 0.5; filter: alpha(opacity = 50); top: 0; bottom: 0; left: 0; right: 0; width: 100%; height: 100%; background-color: Black; color: White;} body { height: 100%; } html { height: 100%; } </style> </head> <body> <div style="height: 100%; width: 100%; position: relative;"> <div style="height: 100px; width: 300px; background-color: Red;"> </div> <div style="height: 230px; width: 9000px; background-color: Green;"> </div> <div style="height: 900px; width: 200px; background-color: Blue;"></div> <div class="OverLay">TestTest!</div> </div> </body> </html> I'd also be open to a solution in JavaScript if one exists, but I'd much rather just be using some simple CSS.

    Read the article

  • How to count the length (number of lines) of a csv file in Rails?

    - by Mathias
    Hello, I have a form (Rails) which allows me to load a .csv file using the file_field. In the view: <% form_for(:upcsv, :html => {:multipart => true}) do |f| %> <table> <tr> <td><%= f.label("File:") %></td> <td><%= f.file_field(:filename) %></td> </tr> </table> <%= f.submit("Submit") %> <% end %> Clicking Submit redirects me to another page (create.html.erb). The file was loaded fine, and I was able to read the contents just fine in this second page. I am trying to show the number of lines in the .csv file in this second page. My controller (semi-pseudocode): class UpcsvController < ApplicationController def index end def create file = params[:upcsv][:filename] ... #params[:upcsv][:file_length] = file.length # Show number of lines in the file #params[:upcsv][:file_length] = file.size ... end end Both file.length and file.size returns '91' when my file only contains 7 lines. From the Rails documentation that I read, once the Submit button is clicked, Rails creates a temp file of the uploaded file, and the params[:upcsv][:filename] contains the contents of the temp/uploaded file and not the path to the file. And I don't know how to extract the number of lines in my original file. What is the correct way to get the number of lines in the file? My create.html.erb: <table> <tr> <td>File length:</td> <td><%= params[:upcsv][:file_length] %></td> </tr> </table> I'm really new at Rails (just started last week), so please bear with my stupid questions. Thank you!

    Read the article

  • C program using inotify to monitor multiple directories along with sub-directories?

    - by lakshmipathi
    I have program which monitors a directory (/test) and notify me. I want to improve this to monitor another directory (say /opt). And also how to monitor it's subdirectories , current i'll get notified if any changes made to files under /test . but i'm not getting any inotifcation if changes made sub-directory of /test, that is touch /test/sub-dir/files.txt .. Here my current code - hope this will help /* Simple example for inotify in Linux. inotify has 3 main functions. inotify_init1 to initialize inotify_add_watch to add monitor then inotify_??_watch to rm monitor.you the what to replace with ??. yes third one is inotify_rm_watch() */ #include <sys/inotify.h> int main(){ int fd,wd,wd1,i=0,len=0; char pathname[100],buf[1024]; struct inotify_event *event; fd=inotify_init1(IN_NONBLOCK); /* watch /test directory for any activity and report it back to me */ wd=inotify_add_watch(fd,"/test",IN_ALL_EVENTS); while(1){ //read 1024 bytes of events from fd into buf i=0; len=read(fd,buf,1024); while(i<len){ event=(struct inotify_event *) &buf[i]; /* check for changes */ if(event->mask & IN_OPEN) printf("%s :was opened\n",event->name); if(event->mask & IN_MODIFY) printf("%s : modified\n",event->name); if(event->mask & IN_ATTRIB) printf("%s :meta data changed\n",event->name); if(event->mask & IN_ACCESS) printf("%s :was read\n",event->name); if(event->mask & IN_CLOSE_WRITE) printf("%s :file opened for writing was closed\n",event->name); if(event->mask & IN_CLOSE_NOWRITE) printf("%s :file opened not for writing was closed\n",event->name); if(event->mask & IN_DELETE_SELF) printf("%s :deleted\n",event->name); if(event->mask & IN_DELETE) printf("%s :deleted\n",event->name); /* update index to start of next event */ i+=sizeof(struct inotify_event)+event->len; } } }

    Read the article

  • How can I edit an entity in MVC4 with EF5 which has a unique constraint?

    - by Yoeri
    [HttpPost] public ActionResult Edit(Car car) { if (ModelState.IsValid) { db.Entry(car).State = EntityState.Modified; db.SaveChanges(); return RedirectToAction("Index"); } return View(car); } This is a controller method scaffolded by MCV 4 My "car" entity has a unique field: LicensePlate. I have custom validation on my Entity: Validation: public partial class Car { partial void ValidateObject(ref List<ValidationResult> validationResults) { using (var db = new GarageIncEntities()) { if (db.Cars.Any(c => c.LicensePlate.Equals(this.LicensePlate))) { validationResults.Add( new ValidationResult("This licenseplate already exists.", new string[]{"LicensePlate"})); } } } } should it be usefull, my car entity: public partial class Car:IValidatableObject { public int Id { get; set; } public string Color { get; set; } public int Weight { get; set; } public decimal Price { get; set; } public string LicensePlate { get; set; } public System.DateTime DateOfSale { get; set; } public int Type_Id { get; set; } public int Fuel_Id { get; set; } public virtual CarType Type { get; set; } public virtual Fuel Fuel { get; set; } public IEnumerable<ValidationResult> Validate(ValidationContext validationContext) { var result = new List<ValidationResult>(); ValidateObject(ref result); return result; } partial void ValidateObject(ref List<ValidationResult> validationResults); } QUESTION: Everytime I edit a car, it raises an error: Validation failed for one or more entities. See 'EntityValidationErrors' property for more details. The error is the one raised by my validation, saying it can't edit because there is already a car with that license plate. If anyone could point me in the right direction to fix this, that would be great! I searched but couldn't find anything, so even related posts are welcome!

    Read the article

  • Abstract Data Type: Any1 can help me this? thanks..

    - by Aga Hibaya
    Objectives: Implement the Abstract Data Type (ADT) List using dynamically allocated arrays and structures. Description A LIST is an ordered collection of items where items may be inserted anywhere in the list. Implement a LIST using an array as follows: struct list { int *items; // pointer to the array int size; // actual size of the array int count; // number of items in the array }; typedef struct list *List; // pointer to the structure Implement the following functions: a) List newList(int size); - will create a new List and return its pointer. Allocate space for the structure, allocate space for the array, then initialize size and count, return the pointer. b) void isEmpty(List list); c) void display(List list); d) int contains(List list, int item); e) void remove(List list, int i) ; f) void insertAfter(List list,int item, int i); g) void addEnd(List list,int item) - add item at the end of the list – simply store the data at position count, then increment count. If the array is full, allocate an array twice as big as the original. count = 5 size = 10 0 1 2 3 4 5 6 7 8 9 5 10 15 20 30 addEnd(list,40) will result to count = 6 size = 10 0 1 2 3 4 5 6 7 8 9 5 10 15 20 30 40 h) void addFront(List list,int item) - shift all elements to the right so that the item can be placed at position 0, then increment count. Bonus: if the array is full, allocate an array twice as big as the original. count = 5 size = 10 0 1 2 3 4 5 6 7 8 9 5 10 15 20 30 addFront(list,40) will result to count = 6 size = 10 0 1 2 3 4 5 6 7 8 9 40 5 10 15 20 30 i) void removeFront(List list) - shift all elements to the left and decrement count; count = 6 size = 10 0 1 2 3 4 5 6 7 8 9 40 5 10 15 20 30 removeFront(list) will result to count = 5 size = 10 0 1 2 3 4 5 6 7 8 9 5 10 15 20 30 j) void remove(List list,int item) - get the index of the item in the list and then shift all elements to the count = 6 size = 10 0 1 2 3 4 5 6 7 8 9 40 5 10 15 20 30 remove(list,10) will result to count = 5 size = 10 0 1 2 3 4 5 6 7 8 9 40 5 15 20 30 Remarks

    Read the article

  • Simaltaneous connections with PHP and SOAP?

    - by Dov
    I'm new to using SOAP and understanding the utmost basics of it. I create a client resource/connection, I then run some queries in a loop and I'm done. The issue I am having is when I increase the iterations of the loop, ie: from 100 to 1000, it seems to run out of memory and drops an internal server error. How could I possibly run either a) multiple simaltaneous connections or b) create a connection, 100 iterations, close connection, create connection.. etc. "a)" looks to be the better option but I have no clue as to how to get it up and running whilst keeping memory (I assume opening and closing connections) at a minimum. Thanks in advance! index.php <?php // set loops to 0 $loops = 0; // connection credentials and settings $location = 'https://theconsole.com/'; $wsdl = $location.'?wsdl'; $username = 'user'; $password = 'pass'; // include the console and client classes include "class_console.php"; include "class_client.php"; // create a client resource / connection $client = new Client($location, $wsdl, $username, $password); while ($loops <= 100) { $dostuff; } ?> class_console.php <?php class Console { // the connection resource private $connection = NULL; /** * When this object is instantiated a connection will be made to the console */ public function __construct($location, $wsdl, $username, $password, $proxyHost = NULL, $proxyPort = NULL) { if(is_null($proxyHost) || is_null($proxyPort)) $connection = new SoapClient($wsdl, array('login' => $username, 'password' => $password)); else $connection = new SoapClient($wsdl, array('login' => $username, 'password' => $password, 'proxy_host' => $proxyHost, 'proxy_port' => $proxyPort)); $connection->__setLocation($location); $this->connection = $connection; return $this->connection; } /** * Will print any type of data to screen, where supported by print_r * * @param $var - The data to print to screen * @return $this->connection - The connection resource **/ public function screen($var) { print '<pre>'; print_r($var); print '</pre>'; return $this->connection; } /** * Returns a server / connection resource * * @return $this->connection - The connection resource */ public function srv() { return $this->connection; } } ?>

    Read the article

  • CI pagination, POST problem

    - by Gwood
    Okay, I am pretty new in CI and I am stuck on pagination. I am performing this pagination on a record set that is result of a query. Now everything seems to be working fine. But there’s some problem probably with the link. I am displaying 10 results per page. Now if the results are less than 10 then it’s fine. Or If I pull up the entire records in the table it works fine. But in case the result is more than 10 rows, then the first 10 is perfectly displayed, and when I click on the pagination link to get to the next page the next page displays the rest of the results from the query as well as, other records in the table. ??? I am confused.. Any help?? Here’s the model code I am using .... function getTeesLike($field,$param) { $this-db-like($field,$param); $this-db-limit(10, $this-uri-segment(3)); $query=$this-db-get(‘shirt’); if($query-num_rows()0){ return $query-result_array(); } } function getNumTeesfromQ($field,$param) { $this-db-like($field,$param); $query=$this-db-get(‘shirt’); return $query-num_rows(); } And here’s the controller code .... $KW=$this-input-post(‘searchstr’); $this-load-library(‘pagination’); $config[‘base_url’]=‘http://localhost/cit/index.php/tees/show/’; $config[‘total_rows’]=$this-T-getNumTeesfromQ(‘Title’,$KW); $config[‘per_page’]=‘10’; $this-pagination-initialize($config); $data[‘tees’]=$this-T-getTeesLike(‘Title’,$KW); $data[‘title’]=‘Displaying Tees data’; $data[‘header’]=‘Tees List’; $data[‘links’]=$this-pagination-create_links(); $this-load-view(‘tee_res’, $data); //What am I doing wrong here ???? Pls help ... I guess the problem is with the $KW=$this-input-post(‘searchstr’); .. Because if I hard code a value for $KW it works fine. May be I should use POST differently ..but how do I pass the value from the form without POSTING it , its CI so not GET ... ??????

    Read the article

  • QTreeView memory consumption

    - by Eye of Hell
    Hello. I'm testing QTreeView functionality right now, and i was amazed by one thing. It seems that QTreeView memory consumption depends on items count O_O. This is highly unusual, since model-view containers of such type only keeps track for items being displayed, and rest of items are in the model. I have written a following code with a simple model that holds no data and just reports that it has 10 millions items. With MFC, Windows API or .NET tree / list with such model will take no memory, since it will display only 10-20 visible elements and will request model for more upon scrolling / expanding items. But with Qt, such simple model results in ~300Mb memory consumtion. Increasing number of items will increase memory consumption. Maybe anyone can hint me what i'm doing wrong? :) #include <QtGui/QApplication> #include <QTreeView> #include <QAbstractItemModel> class CModel : public QAbstractItemModel { public: QModelIndex index ( int i_nRow, int i_nCol, const QModelIndex& i_oParent = QModelIndex() ) const { return createIndex( i_nRow, i_nCol, 0 ); } public: QModelIndex parent ( const QModelIndex& i_oInex ) const { return QModelIndex(); } public: int rowCount ( const QModelIndex& i_oParent = QModelIndex() ) const { return i_oParent.isValid() ? 0 : 1000 * 1000 * 10; } public: int columnCount ( const QModelIndex& i_oParent = QModelIndex() ) const { return 1; } public: QVariant data ( const QModelIndex& i_oIndex, int i_nRole = Qt::DisplayRole ) const { return Qt::DisplayRole == i_nRole ? QVariant( "1" ) : QVariant(); } }; int main(int argc, char *argv[]) { QApplication a(argc, argv); QTreeView oWnd; CModel oModel; oWnd.setUniformRowHeights( true ); oWnd.setModel( & oModel ); oWnd.show(); return a.exec(); }

    Read the article

  • jQuery: resizing element cuts off parent's background

    - by Justine
    Hi, I've been trying to recreate an effect from this tutorial: http://jqueryfordesigners.com/jquery-look-tim-van-damme/ Unfortunately, I want a background image underneath and because of the resize going on in JavaScript, it gets resized and cut off as well, like so: http://dev.gentlecode.net/dotme/index-sample.html - you can view source there to check the HTML, but basic structure looks like this: <div class="page"> <div class="container"> div.header ul.nav div.main </div> </div> Here is my jQuery code: $('ul.nav').each(function() { var $links = $(this).find('a'), panelIds = $links.map(function() { return this.hash; }).get().join(","), $panels = $(panelIds), $panelWrapper = $panels.filter(':first').parent(), delay = 500; $panels.hide(); $links.click(function() { var $link = $(this), link = (this); if ($link.is('.current')) { return; } $links.removeClass('current'); $link.addClass('current'); $panels.animate({ opacity : 0 }, delay); $panelWrapper.animate({ height: 0 }, delay, function() { var height = $panels.hide().filter(link.hash).show().css('opacity', 1).outerHeight(); $panelWrapper.animate({ height: height }, delay); }); }); var showtab = window.location.hash ? '[hash=' + window.location.hash + ']' : ':first'; $links.filter(showtab).click(); }); In this example, panelWrapper is a div.main and it gets resized to fit the content of tabs. The background is applied to the div.page but because its child is getting resized, it resizes as well, cutting off the background image. It's hard to explain so please look at the link above to see what I mean. I guess what I'm trying to ask is: is there a way to resize an element without resizing its parent? I tried setting height and min-height of .page to 100% and 101% but that didn't work. I tried making the background image fixed, but nada. It also happens if I add the background to the body or even html. Help?

    Read the article

  • HTML5 <audio> Safari live broadcast vs not

    - by Peter Parente
    I'm attempting to embed an HTML5 audio element pointing to MP3 or OGG data served by a PHP file . When I view the page in Safari, the controls appear, but the UI says "Live Broadcast." When I click play, the audio starts as expected. Once it ends, however, I can't start it playing again by clicking play. Even using the JS API on the audio element and setting currentTime to 0 fails with an index error exception. I suspected the headers from the PHP script were the problem, particularly missing a content length. But that's not the case. The response headers include a proper Content- Length to indicate the audio has finite size. Furthermore, everything works as expected in Firefox 3.5+. I can click play on the audio element multiple times to hear the sound replay. If I remove the PHP script from the equation and serve up a static copy of the MP3 file, everything works fine in Safari. Does this mean Safari is treating audio src URLs with query parameters differently than URLs that don't have them? Anyone have any luck getting this to work? My simple example page is: <!DOCTYPE html> <html> <head></head> <body> <audio controls autobuffer> <source src="say.php?text=this%20is%20a%20test&format=.ogg" /> <source src="say.php?text=this%20is%20a%20test&format=.mp3" /> </audio> </body> </html> HTTP Headers from PHP script: HTTP/1.x 200 OK Date: Sun, 03 Jan 2010 15:39:34 GMT Server: Apache X-Powered-By: PHP/5.2.10 Content-Length: 8993 Keep-Alive: timeout=2, max=98 Connection: Keep-Alive Content-Type: audio/mpeg HTTP Headers from direct file access: HTTP/1.x 200 OK Date: Sun, 03 Jan 2010 20:06:59 GMT Server: Apache Last-Modified: Sun, 03 Jan 2010 03:20:02 GMT Etag: "a404b-c3f-47c3a14937c80" Accept-Ranges: bytes Content-Length: 8993 Keep-Alive: timeout=2, max=100 Connection: Keep-Alive Content-Type: audio/mpeg I tried hard-coding the Accept-Ranges header into the script too, but no luck.

    Read the article

  • Passing Variables Along in a Function

    - by John
    Hello, In the function show_commentbox() below, I would like to pass along the variables $_SESSION['loginid'], $submissionid, $submission, $url, $submittor, $submissiondate, $countcomments, $dispurl. With the setup below, it's not working. How could I change it to make show_commentbox() pass the variables along? Thanks in advance, John index.php: <?php $submission = $_GET['submission']; require_once "header.php"; include "login.php"; include "comments.php"; include "commentformonoff.php"; ?> In header.php: require_once ("function.inc.php"); In comments.php: $uid = $_SESSION['loginid']; $submissiondate = mysql_real_escape_string($_GET['submissiondate']); $submittor = mysql_real_escape_string($_GET['submittor']); $countcomments = mysql_real_escape_string($_GET['countcomments']); $dispurl = mysql_real_escape_string($_GET['dispurl']); $url = mysql_real_escape_string($_GET['url']); $submission = mysql_real_escape_string($_GET['submission']); $submissionid = mysql_real_escape_string($_GET['submissionid']); commentformonoff.php: <?php if (!isLoggedIn()) { if (isset($_POST['cmdlogin'])) { if (checkLogin($_POST['username'], $_POST['password'])) { show_commentbox(); } else { echo "Login to comment"; } } else { echo "Login to comment"; } } else { show_commentbox(); } ?> In display.functions.inc.php: function show_commentbox() { echo '<form action="http://www...com/sandbox/comments/comments2.php" method="post"> <input type="hidden" value="'.$_SESSION['loginid'].'" name="uid"> <input type="hidden" value="'.$submissionid.'" name="submissionid"> <input type="hidden" value="'.$submission.'" name="submission"> <input type="hidden" value="'.$url.'" name="url"> <input type="hidden" value="'.$submittor.'" name="submittor"> <input type="hidden" value="'.$submissiondate.'" name="submissiondate"> <input type="hidden" value="'.$countcomments.'" name="countcomments"> <input type="hidden" value="'.$dispurl.'" name="dispurl"> <label class="addacomment" for="title">Add a comment:</label> <textarea class="commentsubfield" name="comment" type="comment" id="comment" maxlength="1000"></textarea> <div class="commentsubbutton"><input name="submit" type="submit" value="Submit"></div> </form> '; }

    Read the article

  • jquery xml slideshow using ajax

    - by Codemaster Snake
    Hi all, I am trying to create a JQuery based slider using ajax to load images url from a xml file and then creating a html li list dynamically. Till now I am able to append and create DOM structure using Jquery. But I am not able to access the dynamically created list. I have also tried custom events using bind but not able to successfully implement it. Following is my jquery plugin code: (function($){ $.fn.genie = function(options) { var genie_dom = "<div class='genie_wrapper'><ul class='genie'></ul></div>"; var o, base; var genie_styles = "<style>.genie_wrapper{overflow:hidden}.genie{position: relative;margin:0;padding:0}.genie li {position: absolute;margin:0;padding:0}</style>"; var defaults = { width : '960px', height : '300px', background_color : '#000000', xml : 'genie.xml', speed : 1000, pause: 1000 }; base = $(this); o = $.extend(defaults, options); return this.each(function() { create_elements(); }); function create_elements() { $(base).html(genie_dom); $('head').append(genie_styles); $('.genie_wrapper').css({'background-color' : o.background_color, width : o.width, height: '300px', overflow: ''}); $.ajax({ type: "GET", url: o.xml, dataType: "xml", success: function(xml) { var slides = $(xml).find('slide'); var count = 0; $(slides).each(function(){ $('.genie').append('<li class="slide" id="slide'+count+'"><img src="' + $(this).text() + '" /></li>'); $('.genie li:last').css({'z-index' : count}); count++; }); } }); } } })(jQuery); In my html file: There is only one empty div to which I am calling my plugin like $(document).ready(function() { $('.slideshow').genie(); }); I have also tried using following everywhere in JS: $(".slide").bind("start_animation", function(e){ $(this).fadeOut(1000); alert($(this).html()); }); $(".slide").trigger("start_animation"); I want to animate li list using animate function, Can anyone please tell me how to implement it... It would be of great help... Regards, Neeraj Kumar EDIT: Can Anyone help me out please????

    Read the article

  • breakpoint inside QComboBox subclass not working

    - by yan bellavance
    I have subclassed QComboBox to customize it for special needs. The subclass is used to promote QComboBoxes in a ui file from QtDesigner. Everything works except that when I put a break point in a slot, the program does not stop at the breakpoint. I do however know that it is being called from the result it generates. I checked other slots in my program and they work fine with breakpoints. Doing a clean and rebuild all did not fix it. What could be causing this and is there anything I can do about it? The slot in question is the only one in the subclass and is called "do_indexChanged()". You can find the slot on line 37 of the class header below and the signal-slot connection on line 10 of the class source file. CLASS HEADER: #ifndef WVQCOMBOBOX_H #define WVQCOMBOBOX_H #include <QWidget> #include <QObject> #include <QComboBox> #include <QVariant> class wvQComboBox : public QComboBox { Q_OBJECT //Q_PROPERTY(bool writeEnable READ writeEnable WRITE setWriteEnable) public: explicit wvQComboBox(QWidget *parent = 0); bool writeEnable() { return this->property("writeEnable").toBool(); } void setWriteEnable(const bool & writeEnable){ this->setProperty("writeEnable",writeEnable); } bool newValReady() { return this->property("newValReady").toBool(); } void setNewValReady(const bool & newValReady){ this->setProperty("newValReady",newValReady); } QString getNewVal(); int getNewValIndex(); int oldVal; //comboBox Index before user edit began private slots: void do_indexChanged(){ this->setWriteEnable(true); if(oldVal!=currentIndex()){ this->setNewValReady(true); oldVal=currentIndex(); } } protected: void focusInEvent ( QFocusEvent * event ); //void focusOutEvent ( QFocusEvent * event );//dont need because of currentIndexChanged(int) }; #endif // WVQCOMBOBOX_H #include "wvqcombobox.h" wvQComboBox::wvQComboBox(QWidget *parent) : QComboBox(parent) { this->setWriteEnable(true); this->setNewValReady(false); oldVal=this->currentIndex(); connect(this,SIGNAL(currentIndexChanged(int)),this,SLOT(do_indexChanged())); } void wvQComboBox::focusInEvent ( QFocusEvent * event ) { this->setWriteEnable(false); oldVal=this->currentIndex(); } QString wvQComboBox::getNewVal(){ setNewValReady(false); return this->currentText(); } int wvQComboBox::getNewValIndex(){ setNewValReady(false); return this->currentIndex(); }

    Read the article

  • Google Maps and Json structure

    - by mark
    I found a great script to plot markers on Google Maps. It uses an Json file to laod it. The problem is I don't know what the structure looks like in this case. Can you help? function loadMarkers() { var bounds = map.getBounds(); var zoomLevel = map.getZoom(); $.post("/gmaps/markers/index.php", {zoom: zoomLevel, swLat: bounds.getSouthWest().lat(), swLon: bounds.getSouthWest().lng(), neLat: bounds.getNorthEast().lat(), neLon: bounds.getNorthEast().lng()}, function(data) { processMarkers(data, _smallMarkerSize); }, "json" ); } function processMarkers(webcams, markerSize) { var marker = null; var markersInView = new Array(); var idsInView = new Array(); // Loop through the new webcams for (var i = 0; i < webcams.length; i++) { var idx = markers.indexOf(webcams[i].id); if (idx == -1) { var info_html = "<table class='infowindow'>"; info_html += "<tr><td class='img'>"; info_html += "<img src='" + webcams[i].smallimg + "' /><td>"; info_html += "<td><p><b>" + webcams[i].loc + "</b>"; info_html += "<br /><a href='/webcam/" + webcams[i].url + "' target='_blank'>Show webcam</a></p></td></tr>"; info_html += "</table>"; marker = new WebcamMarker(new GLatLng(webcams[i].latitude, webcams[i].longitude), {image: "" + webcams[i].smallimg + "", height: markerSize, width: markerSize}); marker.myhtml = info_html; map.addOverlay(marker); markersInView[webcams[i].id] = marker; } else { markersInView[webcams[i].id] = markers[webcams[i].id]; } idsInView.push(webcams[i].id); } // Now remove the markers outside of the viewport for (var i = 0; i < webcamids.length; i++) { var idx = markersInView.indexOf(webcamids[i]); if (idx == -1) { marker = markers[webcamids[i]]; map.removeOverlay(marker); } } markers = markersInView; webcamids = idsInView; }

    Read the article

  • Using jQuery's ajax get request with parameters, returning page content

    - by Stevie Jenowski
    Thank you for looking at my question, as I appreciate your time. Okay, so I'm trying to use jQuery's get function to call my php script which ultimately returns a variable which is a built template of the main content of my page minus my static header/footer, for which I would like to replace the "old" page content without the page reloading. Can anyone point me in the right direction as to where I'm going wrong here? My code is as follows... jQuery: function getData(time, type) { $.ajax({ type: "GET", url: "getData.php", data: "time=" + time + "&type=" + type, success: function(data){ $('#pageContent').fadeOut("slow"); $('#pageContent').html(data); $('#pageContent').fadeIn("slow"); } }); return false; } getData.php(paraphrased): .... $time = empty($_GET['time']) ? '' : $_GET['time']; $type = empty($_GET['type']) ? '' : $_GET['type']; echo getData($time, $type); function getData($time, $type) ...... ..... $tmpl = new Template(); $tmpl->time= $time; $tmpl->type = $type; $builtpage = $tmpl->build('index.tmpl'); return $builtpage; ..... ...... jQuery function call: <a href="#" onclick="getData("<?php print $tmpl->time; ?>", "Orange")">Orange</a> <a href="#" onclick="getData("<?php print $tmpl->time; ?>", "Apple")">Apple</a> <a href="#" onclick="getData("<?php print $tmpl->time; ?>", "Banana")">Banana</a> When I click any link, the ajax seems to run fine, and the page does refuse to reload, but the content still remains unchanged... Anyone happen to know what's up?

    Read the article

  • No form with the requested fields?

    - by FRESHTER
    // #!/usr/bin/perl use WWW::Mechanize; use Compress::Zlib; my $mech = WWW::Mechanize->new(); my $username = ""; #fill in username here my $keyword = ""; #fill in password here my $mobile = $ARGV[0]; my $text = $ARGV[1]; $deb = 1; print length($text)."\n" if($deb); $text = $text."\n\n\n\n\n" if(length($text) < 135); $mech->get("http://wwwl.way2sms.com/content/index.html"); unless($mech->success()) { exit; } $dest = $mech->response->content; print "Fetching...\n" if($deb); if($mech->response->header("Content-Encoding") eq "gzip") { $dest = Compress::Zlib::memGunzip($dest); $mech->update_html($dest); } $dest =~ s/<form name="loginForm"/<form action='..\/auth.cl' name="loginForm"/g; $mech->update_html($dest); $mech->form_with_fields(("username","password")); $mech->field("username",$username); $mech->field("password",$keyword); print "Loggin...\n" if($deb); $mech->submit_form(); $dest= $mech->response->content; if($mech->response->header("Content-Encoding") eq "gzip") { $dest = Compress::Zlib::memGunzip($dest); $mech->update_html($dest); } $mech->get("http://wwwl.way2sms.com//jsp/InstantSMS.jsp?val=0"); $dest= $mech->response->content; if($mech->response->header("Content-Encoding") eq "gzip") { $dest = Compress::Zlib::memGunzip($dest); $mech->update_html($dest); } print "Sending ... \n" if($deb); $mech->form_with_fields(("MobNo","textArea")); $mech->field("MobNo",$mobile); $mech->field("textArea",$text); $mech->submit_form(); if($mech->success()) { print "Done \n" if($deb); } else { print "Failed \n" if($deb); exit; } $dest = $mech->response->content; if($mech->response->header("Content-Encoding") eq "gzip") { $dest = Compress::Zlib::memGunzip($dest); #print $dest if($deb); } if($dest =~ m/successfully/sig) { print "Message sent successfully" if($deb); } exit; *In this code I face with an error saying There is no form with the requested fields at ./sms.pl line 65 Can't call method "value" on an undefined value at /usr/share/perl5/vendor_perl/WWW/Mechanize.pm line* 1348. Could any 1 guide me please

    Read the article

  • MVC Entity Framework Model not returning correct data

    - by quagland
    Hi, Run into a strange problem while writing an ASP.NET MVC site. I have a view in my SQL Server database that returns a few date ranges. The view works fine when running the query in SSMS. When the view data is returned by the Entity Framework Model, It returns the correct number of rows but some of the rows are duplicated. Here is an example of what I have done: SQL Server code: CREATE TABLE [dbo].[A]( [ID] [int] NOT NULL, [PhID] [int] NULL, [FromDate] [datetime] NULL, [ToDate] [datetime] NULL, CONSTRAINT [PK_A] PRIMARY KEY CLUSTERED ([ID] ASC)) ON [PRIMARY] go CREATE TABLE [dbo].[B]( [PhID] [int] NOT NULL, [FromDate] [datetime] NULL, [ToDate] [datetime] NULL, CONSTRAINT [PK_B] PRIMARY KEY CLUSTERED ( [PhID] ASC )) ON [PRIMARY] go CREATE VIEW C as SELECT A.ID, CASE WHEN A.PhID IS NULL THEN A.FromDate ELSE B.FromDate END AS FromDate, CASE WHEN A.PhID IS NULL THEN A.ToDate ELSE B.ToDate END AS ToDate FROM A LEFT OUTER JOIN B ON A.PhID = B.PhID go INSERT INTO B (PhID, FromDate, ToDate) VALUES (100, '20100615', '20100715') INSERT INTO A (ID, PhID, FromDate, ToDate) VALUES (1, NULL, '20100101', '20100201') INSERT INTO A (ID, PhID, FromDate, ToDate) VALUES (1, 100, '20100615', '20100715') INSERT INTO B (PhID, FromDate, ToDate) VALUES (101, '20101201', '20101231') INSERT INTO A (ID, PhID, FromDate, ToDate) VALUES (2, NULL, '20100801', '20100901') INSERT INTO A (ID, PhID, FromDate, ToDate) VALUES (2, 101, '20101201', '20101231') So now, if you select all from C, you get 4 separate date ranges In the Entity Framework Model (which I call 'Core'), the view 'C' is added. in MVC Controller: public class HomeController : Controller { public ActionResult Index() { CoreEntities db = new CoreEntities(); var clist = from c in db.C select c; return View(clist.ToList()); } } in MVC View: @model List<RM.Models.C> @{ foreach (RM.Models.C c in Model) { @String.Format("{0:dd-MMM-yyyy}", c.FromDate) <span>-</span> @String.Format("{0:dd-MMM-yyyy}", c.ToDate) <br /> } } When I run all this, it outputs this: 01-Jan-2010 - 01-Feb-2010 01-Jan-2010 - 01-Feb-2010 01-Aug-2010 - 01-Sep-2010 01-Aug-2010 - 01-Sep-2010 When it should do this (this is what the view returns): 01-Jan-2010 - 01-Feb-2010 15-Jun-2010 - 15-Jul-2010 01-Aug-2010 - 01-Sep-2010 01-Dec-2010 - 31-Dec-2010 Also, I've run the SQL profiler over it and according to that, the query being executed is: SELECT [Extent1].[ID] AS [ID], [Extent1].[FromDate] AS [FromDate], [Extent1].[ToDate] AS [ToDate] FROM (SELECT [C].[ID] AS [ID], [C].[FromDate] AS [FromDate], [C].[ToDate] AS [ToDate] FROM [dbo].[C] AS [C]) AS [Extent1] Which returns the correct data So it seems that the entity framework is doing something to the data in the meantime. To me, everything looks fine! Have I missed something? Cheers, Ben

    Read the article

  • Bandwidth Limit Php Not working

    - by Saxtor
    Hey How are you doing guys, i am trying to limit bandwidth per users not by ipaddress for some reason my code doesnt work i need some help, what i am trying to do is to limit the download of the user that they would only have 10Gb per day to download however it seems to me that my buffer is not working when i use multiple connections it doesnt work, but when i use one connect it works 80% here is my code can you debug the error for me thanks. /** * @author saxtor if you can improve this code email me [email protected] * @copyright 2010 */ /** * CREATE TABLE IF NOT EXISTS `max_traffic` ( `id` int(255) NOT NULL AUTO_INCREMENT, `limit` int(255) NOT NULL, PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=0 ; */ //SQL Connection [this is hackable for testing] date_default_timezone_set("America/Guyana"); mysql_connect("localhost", "root", "") or die(mysql_error()); mysql_select_db("Quota") or die(mysql_error()); function quota($id) { $result = mysql_query("SELECT `limit` FROM max_traffic WHERE id='$id' ") or die(error_log(mysql_error()));; $row = mysql_fetch_array($result); return $row[0]; } function update_quota($id,$value) { $result = mysql_query("UPDATE `max_traffic` SET `limit`='$value' WHERE id='$id'") or die(mysql_error()); return $value; } if ( quota(1) != 0) $limit = quota(1); else $limit = 0; $multipart = false; //was a part of the file requested? (partial download) $range = $_SERVER["HTTP_RANGE"]; if ($range) { $cookie .= "\r\nRange: $range"; $multipart = true; header("X-UR-RANGE-Range: $range"); } $url = 'http://127.0.0.1/puppy.iso'; $filename = basename($url); //octet-stream + attachment => client always stores file header('Content-type: application/octet-stream'); header('Content-Disposition: attachment; filename="'.$filename.'"'); //always included so clients know this script supports resuming header("Accept-Ranges: bytes"); $user_agent = ini_get("user_agent"); ini_set("user_agent", $user_agent . "\r\nCookie: enc=$cookie"); $httphandle = fopen($url, "r"); $headers = stream_get_meta_data($httphandle); $size = $headers["wrapper_data"][6]; $sizer = explode(' ',$size); $size = $sizer[1]; //let's check the return header of rapidshare for range / length indicators //we'll just pass these to the client foreach ($headers["wrapper_data"] as $header) { $header = trim($header); if (substr(strtolower($header), 0, strlen("content-range")) == "content-range") { // _insert($range); header($header); header("X-RS-RANGE-" . $header); $multipart = true; //content-range indicates partial download } elseif (substr(strtolower($header), 0, strlen("Content-Length")) == "content-length") { // _insert($range); header($header); header("X-RS-CL-" . $header); } } if ($multipart) header('HTTP/1.1 206 Partial Content'); flush(); $speed = 4128; $packet = 1; //this is private dont touch. $bufsize = 128; //this is private dont touch/ $bandwidth = 0; //this is private dont touch. while (!(connection_aborted() || connection_status() == 1) && $size > 0) { while (!feof($httphandle) && $size > 0) { if ($limit <= 0 ) $size = 0; if ( $size < $bufsize && $size != 0 && $limit != 0) { echo fread($httphandle,$size); $bandwidth += $size; } else { if( $limit != 0) echo fread($httphandle,$bufsize); $bandwidth += $bufsize; } $size -= $bufsize; $limit -= $bufsize; flush(); if ($speed > 0 && ($bandwidth > $speed*$packet*103)) { usleep(100000); $packet++; //update_quota(1,$limit); } error_log(update_quota(1,$limit)); $limit = quota(1); //if( $size <= 0 ) // exit; } fclose($httphandle); } exit;

    Read the article

  • sorting a doubly linked list with merge sort.

    - by user329820
    Hi I have found this code in the internet and it was for arrays ,I want to change it for doubly linked list(instead of index we should use pointer) would you please help me that how can i change merge method(I have changed sort method by myself) also this is not my home work ,I love working with linked list!! public class MergeSort { private DoublyLinkedList LocalDoublyLinkedList; public MergeSort(DoublyLinkedList list) { LocalDoublyLinkedList = list; } public void sort() { if (LocalDoublyLinkedList.size() <= 1) { return; } DoublyLinkedList listOne = new DoublyLinkedList(); DoublyLinkedList listTwo = new DoublyLinkedList(); for (int x = 0; x < (LocalDoublyLinkedList.size() / 2); x++) { listOne.add(x, LocalDoublyLinkedList.getValue(x)); } for (int x = (LocalDoublyLinkedList.size() / 2) + 1; x < LocalDoublyLinkedList.size`(); x++) {` listTwo.add(x, LocalDoublyLinkedList.getValue(x)); } //Split the DoublyLinkedList again MergeSort sort1 = new MergeSort(listOne); MergeSort sort2 = new MergeSort(listTwo); sort1.sort(); sort2.sort(); merge(listOne, listTwo); } private void merge(DoublyLinkedList a, DoublyLinkedList b) { int x = 0; int y = 0; int z = 0; while (x < first.length && y < second.length) { if (first[x] < second[y]) { a[z] = first[x]; x++; } else { a[z] = second[y]; y++; } z++; } //copy remaining elements to the tail of a[]; for (int i = x; i < first.length; i++) { a[z] = first[i]; z++; } for (int i = y; i < second.length; i++) { a[z] = second[i]; z++; } } }

    Read the article

  • Facebook Like not Pulling Title

    - by matthewb
    I am having some issues with the new facebook like button. It shows up fine, however for some reason it's not pulling the title of the page. I have the and I am using og:title, all are filled in, when I view the source of the iframe created on the load of he button, the in there is blank. I am also trying to put the tweetmeme and that's seeing that title and not the meta, or the normal page title. What am I doing wrong? <html xmlns="http://www.w3.org/1999/xhtml" xmlns:og="http://opengraphprotocol.org/schema/" xmlns:fb="http://developers.facebook.com/schema/"> <fb:like href="<?=$url?>" layout="button_count" show_faces="false" width="100" font="arial"></fb:like> UPDATE: Complete Head <head> <title>Ladder 15 Gets A New Menu!</title> <meta content="Growing up can be hard to do, especially in the Mad River family. But Ladder 15 has come into its own over the winter.&nbsp; With some new cocktails, wine selection, a hefty new beer list and veteran Chef David Ansill in the kitchen, you can check your fist pump at" name="Description"> <meta content="" name="Keywords"> <meta content="cities2night inc." name="author"> <meta content="Cities2Night 2010" name="copyright"> <meta content="en-us" name="language"> <meta content="General" name="rating"> <meta content="index,follow" name="robots"> <meta content="text/html; charset=UTF-8" http-equiv="Content-Type"> <meta content="Ladder 15 gets a new menu!" name="tweetmeme-title"> <meta content="Ladder 15 gets a new menu!" property="og:title"> <meta content="article" property="og:type"> <meta content="http://philly.cities2night.com/articles/show/listing/11/ladder-15-gets-a-new-menu" property="og:url"> <meta content="http://philly.cities2night.com/public/article_images/11.jpg" property="og:image"> <meta content="c0176da0ec38aaf107c0ef6c8cdeee38" property="fb:app_id"> <meta content="Philly2night.com" property="og:site_name"> <meta content="Growing up can be hard to do, especially in the Mad River family. But Ladder" property="og:description"></head>

    Read the article

  • Using pointers, references, handles to generic datatypes, as generic and flexible as possible

    - by Patrick
    In my application I have lots of different data types, e.g. Car, Bicycle, Person, ... (they're actually other data types, but this is just for the example). Since I also have quite some 'generic' code in my application, and the application was originally written in C, pointers to Car, Bicycle, Person, ... are often passed as void-pointers to these generic modules, together with an identification of the type, like this: Car myCar; ShowNiceDialog ((void *)&myCar, DATATYPE_CAR); The 'ShowNiceDialog' method now uses meta-information (functions that map DATATYPE_CAR to interfaces to get the actual data out of Car) to get information of the car, based on the given data type. That way, the generic logic only has to be written once, and not every time again for every new data type. Of course, in C++ you could make this much easier by using a common root class, like this class RootClass { public: string getName() const = 0; }; class Car : public RootClass { ... }; void ShowNiceDialog (RootClass *root); The problem is that in some cases, we don't want to store the data type in a class, but in a totally different format to save memory. In some cases we have hundreds of millions of instances that we need to manage in the application, and we don't want to make a full class for every instance. Suppose we have a data type with 2 characteristics: A quantity (double, 8 bytes) A boolean (1 byte) Although we only need 9 bytes to store this information, putting it in a class means that we need at least 16 bytes (because of the padding), and with the v-pointer we possibly even need 24 bytes. For hundreds of millions of instances, every byte counts (I have a 64-bit variant of the application and in some cases it needs 6 GB of memory). The void-pointer approach has the advantage that we can almost encode anything in a void-pointer and decide how to use it if we want information from it (use it as a real pointer, as an index, ...), but at the cost of type-safety. Templated solutions don't help since the generic logic forms quite a big part of the application, and we don't want to templatize all this. Additionally, the data model can be extended at run time, which also means that templates won't help. Are there better (and type-safer) ways to handle this than a void-pointer? Any references to frameworks, whitepapers, research material regarding this?

    Read the article

  • Quick question regarding this issue, Why doesnt it print out the second value(converted second value

    - by sil3nt
    Quick question, What have I done wrong here. The purpose of this code is to get the input into a string, the input being "12 34", with a space in between the "12" and "32" and to convert and print the two separate numbers from an integer variable known as number. Why doesn't the second call to the function copyTemp, not produce the value 34?. I have an index_counter variable which keeps track of the string index and its meant to skip the 'space' character?? what have i done wrong? thanks. #include <stdio.h> #include <string.h> int index_counter = 0; int number; void copyTemp(char *expr,char *temp); int main(){ char exprstn[80]; //as global? char tempstr[80]; gets(exprstn); copyTemp(exprstn,tempstr); printf("Expression: %s\n",exprstn); printf("Temporary: %s\n",tempstr); printf("number is: %d\n",number); copyTemp(exprstn,tempstr); //second call produces same output shouldnt it now produce 34 in the variable number? printf("Expression: %s\n",exprstn); printf("Temporary: %s\n",tempstr); printf("number is: %d\n",number); return 0; } void copyTemp(char *expr,char *temp){ int i; for(i = index_counter; expr[i] != '\0'; i++){ if (expr[i] == '0'){ temp[i] = expr[i]; } if (expr[i] == '1'){ temp[i] = expr[i]; } if (expr[i] == '2'){ temp[i] = expr[i]; } if (expr[i] == '3'){ temp[i] = expr[i]; } if (expr[i] == '4'){ temp[i] = expr[i]; } if (expr[i] == '5'){ temp[i] = expr[i]; } if (expr[i] == '6'){ temp[i] = expr[i]; } if (expr[i] == '7'){ temp[i] = expr[i]; } if (expr[i] == '8'){ temp[i] = expr[i]; } if (expr[i] == '9'){ temp[i] = expr[i]; } if (expr[i] == ' '){ temp[i] = '\0'; sscanf(temp,"%d",&number); index_counter = i+1; //skips? } } // is this included here? temp[i] = '\0'; }

    Read the article

  • HLSL tex2d sampler seemingly using inconsistent rounding; why?

    - by RJFalconer
    Hello all, I have code that needs to render regions of my object differently depending on their location. I am trying to use a colour map to define these regions. The problem is when I sample from my colour map, I get collisions. Ie, two regions with different colours in the colourmap get the same value returned from the sampler. I've tried various formats of my colour map. I set the colours for each region to be "5" apart in each case; Indexed colour RGB, RGBA: region 1 will have RGB 5%,5%,5%. region 2 will have RGB 10%,10%,10% and so on. HSV Greyscale: region 1 will have HSV 0,0,5%. region 2 will have HSV 0,0,10% and so on. (Values selected in The Gimp) The tex2D sampler returns a value [0..1]. [ I then intend to derive an int array index from region. Code to do with that is unrelated, so has been removed from the question ] float region = tex2D(gColourmapSampler,In.UV).x; Sampling the "5%" colour gave a "region" of 0.05098 in hlsl. From this I assume the 5% represents 5/100*255, or 12.75, which is rounded to 13 when stored in the texture OR when sampled by the sampler; can't tell which. (Reasoning: 0.05098 * 255 ~= 13) By this logic, the 50% should be stored as 127.5. Sampled, I get 0.50196 which implies it was stored as 128. the 70% should be stored as 178.5. Sampled, I get 0.698039, which implies it was stored as 178. What rounding is going on here? (127.5 becomes 128, 178.5 becomes 178 ?!) Edit: OK, http://en.wikipedia.org/wiki/Bankers_rounding#Round_half_to_even Apparently this is "banker's rounding". Is this really what HLSL samplers use? I am using Shader Model 2 and FX Composer. This is my sampler declaration; //Colour map texture gColourmapTexture < string ResourceName = "Globe_Colourmap_Regions_Greyscale.png"; string ResourceType = "2D"; >; sampler2D gColourmapSampler : register(s1) = sampler_state { Texture = <gColourmapTexture>; #if DIRECT3D_VERSION >= 0xa00 Filter = MIN_MAG_MIP_LINEAR; #else /* DIRECT3D_VERSION < 0xa00 */ MinFilter = Linear; MipFilter = Linear; MagFilter = Linear; #endif /* DIRECT3D_VERSION */ AddressU = Clamp; AddressV = Clamp; };

    Read the article

  • Help with C# program design implementation: multiple array of lists or a better way?

    - by Bob
    I'm creating a 2D tile-based RPG in XNA and am in the initial design phase. I was thinking of how I want my tile engine to work and came up with a rough sketch. Basically I want a grid of tiles, but at each tile location I want to be able to add more than one tile and have an offset. I'd like this so that I could do something like add individual trees on the world map to give more flair. Or set bottles on a bar in some town without having to draw a bunch of different bar tiles with varying bottles. But maybe my reach is greater than my grasp. I went to implement the idea and had something like this in my Map object: List<Tile>[,] Grid; But then I thought about it. Let's say I had a world map of 200x200, which would actually be pretty small as far as RPGs go. That would amount to 40,000 Lists. To my mind I think there has to be a better way. Now this IS pre-mature optimization. I don't know if the way I happen to design my maps and game will be able to handle this, but it seems needlessly inefficient and something that could creep up if my game gets more complex. One idea I have is to make the offset and the multiple tiles optional so that I'm only paying for them when needed. But I'm not sure how I'd do this. A multiple array of objects? object[,] Grid; So here's my criteria: A 2D grid of tile locations Each tile location has a minimum of 1 tile, but can optionally have more Each extra tile can optionally have an x and y offset for pinpoint placement Can anyone help with some ideas for implementing such a design (don't need it done for me, just ideas) while keeping memory usage to a minimum? If you need more background here's roughly what my Map and Tile objects amount to: public struct Map { public Texture2D Texture; public List<Rectangle> Sources; //Source Rectangles for where in Texture to get the sprite public List<Tile>[,] Grid; } public struct Tile { public int Index; //Where in Sources to find the source Rectangle public int X, Y; //Optional offsets }

    Read the article

< Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >