object oriented modeling - Page 588

.Net Reflector 6.5 EAP now available

- by CliveT

With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

Read the article

Implementing Search for BlogReader Windows 8 Sample

- by Harish Ranganathan

The BlogReader sample is an excellent place to start speeding up your Windows 8 development skills. The tutorial is available here and the complete source code is available here Create a project called WindowsBlogReader and create pages for ItemsPage.xaml, SplitPage.xaml and DetailPage.xaml and copy the corresponding code blocks from the sample listed above. Created a class file FeedData.cs and copy the code. Finally, create a class DateConverter.cs and copy the code associated with it. With that you should be able to build and run the project. There seems to be one issue in the sample feeds listed that the first week (feed1) doesn’t seem to expose it. So you can skip that and use the second feed as first feed. You will end up with one feed less but it works. I had demonstrated this in the recent TechDays at Chennai. How we can use the Search Contract and implement Search for within the Blog Titles. First off, we need to declare that the App will be using Search Contract, in the Package.appmanifest file Next, we would need a handle of the Search Contract when user types on the search window in Charms Menu. If you had completed the code sample from the link above, you would have ItemsPage.xaml and ItemsPage.xaml.cs. Open the ItemsPage.xaml.cs. Import the namespaces using System.Collections.ObjectModel and System.Linq. in the ItemsPage() constructor, right after this.InitializeComponent(); add the following code Windows.ApplicationModel.Search.SearchPane.GetForCurrentView().QuerySubmitted += ItemsPage_QuerySubmitted; This event is fired when users open up the Search Panel from Charms Menu, type something and hit enter. We need to handle this event declared in the delegate. For that we need to pull the FeedDataSource instantiation to the root of the class to make it global. So, add the following as the first line within the partial class FeedDataSource feedDataSource; Also, modify the LoadState method, as follows:- protected override void LoadState(Object navigationParameter, Dictionary<String, Object> pageState) { feedDataSource = (FeedDataSource)App.Current.Resources["feedDataSource"]; if (feedDataSource != null) { this.DefaultViewModel["Items"] = feedDataSource.Feeds; } } Next is to implement the ItemsPage_QuerySubmitted method void ItemsPage_QuerySubmitted(Windows.ApplicationModel.Search.SearchPane sender, Windows.ApplicationModel.Search.SearchPaneQuerySubmittedEventArgs args) { this.DefaultViewModel["Items"] = from dynamic item in feedDataSource.Feeds where item.Title.Contains(args.QueryText) select item; } As you can see we are almost using the same defaultviewmodel with the change that we are using a linq query to do a search on feeds which has the Title that matches QueryText. With this we are ready to run the app. Run the App. Hit the Charms Menu with Windows + C key combination and type a text to search within the blog. You can see that it filters the Blogs which has the matching text. We can modify the above Linq query to do a search for the Text in other attributes like description, actual blog content etc., I have uploaded the complete code since the original WindowsBlogReader Code is not available for download. You can download it from here note: this code is provided as-is without any warranties. Cheers!!!

Read the article

Closing the gap between strategy and execution with Oracle Business Intelligence 11g

- by manan.goel(at)oracle.com

Wikipedia defines strategy as a plan of action designed to achieve a particular goal. An example of this is General Electric's acquisitions and divestiture strategy (plan) designed to propel GE to number 1 or 2 place (goal) in every business segment that it operated in. Execution on the other hand can be defined as the actions taken to getting things done. In GE's case execution will be steps followed for mergers/acquisitions or divestiture. Business press has written extensively about the importance of both strategy and execution in achieving desired business objectives. Perhaps the quote from Thomas Edison says it best - "vision without execution is hallucination". Conversely, it can be said that "execution without vision" is well may be "wishful thinking". Research overwhelmingly point towards the wide gap between strategy and execution. According to a published study, 49% of surveyed executives perceive a gap between their organizations' ability to develop and communicate sound strategies and their ability to implement those strategies. Further, of these respondents, 64% don't have full confidence that their companies will be able to close the gap. Having established the severity and importance of the problem let's talk about the reasons for the strategy-execution gap. The common reasons include: - Lack of clearly defined goals - Lack of consistent measure of success - Lack of ownership - Lack of alignment - Lack of communication - Lack of proper execution - Lack of monitoring There are multiple approaches to solving the problem including organizational development practices, technology enablement etc. In most cases a combination of approaches is required to achieve the desired result. For the purposes of this discussion, I'll focus on technology. Imagine an integrated closed loop technology platform that automates the entire management cycle from defining strategy to assigning ownership to communicating goals to achieving alignment to collaboration to taking actions to monitoring progress and achieving mid course corrections. Besides, for best ROI and lowest TCO such a system should also have characteristics like: Complete - Full functionality - Rich end user access Open - Any data source - Any business application - Any technology stack Integrated - Common metadata - Common security - Common system management From a capabilities perspective the system should provide the following capabilities: Define - Strategy - Objectives - Ownership - KPI's Communicate - Pervasive - Collaborative - Role based - Secure Execute - Integrated - Intuitive - Secure - Ubiquitous Monitor - Multiple styles and formats - Exception based - Push & Pull Having talked about the business problem and outlined the blueprint for a technology solution, let's talk about how Oracle Business Intelligence 11g can help. Oracle Business Intelligence is a comprehensive business intelligence solution for reporting, ad hoc query and analysis, OLAP, dashboards and scorecards. Oracle's best in class BI platform is based on an architecturally integrated technology foundation that provides a unified end user experience and features a Common Enterprise Information Model, with common security, query request generation and optimization, and system management. The BI platform is · Complete - meaning it delivers all modes and styles of BI including reporting, ad hoc query and analysis, OLAP, dashboards and scorecards with a rich end user experience that includes visualization, collaboration, alerts and notifications, search and mobile access. · Open - meaning the BI platform integrates with any data source, ETL tool, business application, application server, security infrastructure, portal technology as well as any ODBC compliant third party analytical tool. The suite accesses data from multiple heterogeneous sources--including popular relational and multidimensional data sources and major ERP and CRM applications from Oracle and SAP. · Integrated - meaning the BI platform is based on an architecturally integrated technology foundation built on an open, standards based service oriented architecture. The platform features a common enterprise information model, common security model and a common configuration, deployment and systems management framework. To summarize, Oracle Business Intelligence is a comprehensive, integrated BI platform that lets you define strategy, identify objectives, assign ownership, define KPI's, collaborate, take action, monitor, report and do course corrections all form a single interface and a single system. The platform's integrated metadata model and task based design ensures that the entire workflow from defining strategy to execution to monitoring is completely integrated delivering end to end visibility, transparency and agility. Click here to learn more about Oracle BI 11g.

Read the article

HTTP Module in detail

- by Jalpesh P. Vadgama

I know this post may sound like very beginner level. But I have already posted two topics regarding HTTP Handler and HTTP module and this will explain how http module works in the system. I have already posted What is the difference between HttpModule and HTTPHandler here. Same way I have posted about an HTTP Handler example here as people are still confused with it. In this post I am going to explain about HTTP Module in detail. What is HTTP Module As we all know that when ASP.NET Runtimes receives any request it will execute a series of HTTP Pipeline extensible objects. HTTP Module and HTTP handler play important role in extending this HTTP Pipelines. HTTP Module are classes that will pre and post process request as they pass into HTTP Pipelines. So It’s one kind of filter we can say which will do some procession on begin request and end request. If we have to create HTTP Module we have to implement System.Web.IHttpModule interface in our custom class. An IHTTP Module contains two method dispose where you can write your clean up code and another is Init where your can write your custom code to handle request. Here you can your event handler that will execute at the time of begin request and end request. Let’s create an HTTP Module which will just print text in browser with every request. Here is the code for that. using System; using System.Collections.Generic; using System.Linq; using System.Web; namespace Experiment { public class MyHttpModule:IHttpModule { public void Dispose() { //add clean up code here if required } public void Init(HttpApplication context) { context.BeginRequest+=new EventHandler(context_BeginRequest); context.EndRequest+=new EventHandler(context_EndRequest); } public void context_BeginRequest(object o, EventArgs args) { HttpApplication app = (HttpApplication)o; if (app != null) { app.Response.Write("<h1>Begin Request Executed</h1>"); } } public void context_EndRequest(object o, EventArgs args) { HttpApplication app = (HttpApplication)o; if (app != null) { app.Response.Write("<h1>End Request Executed</h1>"); } } } } Here in above code you can see that I have created two event handler context_Beginrequest and context_EndRequest which will execute at begin request and end request when request are processed. In this event handler I have just written a code to print text on browser. Now In order enable this HTTP Module in HTTP pipeline we have to put a settings in web.config HTTPModules section to tell which HTTPModule is enabled. Below is code for HTTPModule. <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> <httpModules> <add name="MyHttpModule" type="Experiment.MyHttpModule,Experiment"/> </httpModules> </system.web> </configuration> Now I just have created a sample webform with following code in HTML like following. <form id="form1" runat="server"> <B>test of HTTP Module</B> </form> Now let’s run this web form in browser and you can see here it the output as expected. Technorati Tags: HTTPModule,ASP.NET,Request

Read the article

Folders in SQL Server Data Tools

- by jamiet

Recently I have begun a new project in which I am using SQL Server Data Tools (SSDT) and SQL Server Integration Services (SSIS) 2012. Although I have been using SSDT & SSIS fairly extensively while SQL Server 2012 was in the beta phase I usually find that you don’t learn about the capabilities and quirks of new products until you use them on a real project, hence I am hoping I’m going to have a lot of experiences to share on my blog over the coming few weeks. In this first such blog post I want to talk about file and folder organisation in SSDT. The predecessor to SSDT is Visual Studio Database Projects. When one created a new Visual Studio Database Project a folder structure was provided with “Schema Objects” and “Scripts” in the root and a series of subfolders for each schema: Apparently a few customers were not too happy with the tool arbitrarily creating lots of folders in Solution Explorer and hence SSDT has gone in completely the opposite direction; now no folders are created and new objects will get created in the root – it is at your discretion where they get moved to: After using SSDT for a few weeks I can safely say that I preferred the older way because I never used Solution Explorer to navigate my schema objects anyway so it didn’t bother me how many folders it created. Having said that the thought of a single long list of files in Solution Explorer without any folders makes me shudder so on this project I have been manually creating folders in which to organise files and I have tried to mimic the old way as much as possible by creating two folders in the root, one for all schema objects and another for Pre/Post deployment scripts: This works fine until different developers start to build their own different subfolder structures; if you are OCD-inclined like me this is going to grate on you eventually and hence you are going to want to move stuff around so that you have consistent folder structures for each schema and (if you have multiple databases) each project. Moreover new files get created with a filename of the object name + “.sql” and often people like to have an extra identifier in the filename to indicate the object type: The overall point is this – files and folders in your solution are going to change. Some version control systems (VCSs) don’t take kindly to files being moved around or renamed because they recognise the renamed/moved file simply as a new file and when they do that you lose the revision history which, to my mind, is one of the key benefits of using a VCS in the first place. On this project we have been using Team Foundation Server (TFS) and while it pains me to say it (as I am no great fan of TFS’s version control system) it has proved invaluable when dealing with the SSDT problems that I outlined above because it is integrated right into the Visual Studio IDE. Thus the advice from this blog post is: If you are using SSDT consider using an Visual-Studio-integrated VCS that can easily handle file renames and file moves I suspect that fans of other VCSs will counter by saying that their VCS weapon of choice can handle renames/file moves quite satisfactorily and if that’s the case…great…let me know about them in the comments. This blog post is not an attempt to make people use one particular VCS, only to make people aware of this issue that might rise when using SSDT. More to come in the coming few weeks! @jamiet

Read the article

How many developers before continuous integration becomes effective for us?

- by Carnotaurus

There is an overhead associated with continuous integration, e.g., set up, re-training, awareness activities, stoppage to fix "bugs" that turn out to be data issues, enforced separation of concerns programming styles, etc. At what point does continuous integration pay for itself? EDIT: These were my findings The set-up was CruiseControl.Net with Nant, reading from VSS or TFS. Here are a few reasons for failure, which have nothing to do with the setup: Cost of investigation: The time spent investigating whether a red light is due a genuine logical inconsistency in the code, data quality, or another source such as an infrastructure problem (e.g., a network issue, a timeout reading from source control, third party server is down, etc., etc.) Political costs over infrastructure: I considered performing an "infrastructure" check for each method in the test run. I had no solution to the timeout except to replace the build server. Red tape got in the way and there was no server replacement. Cost of fixing unit tests: A red light due to a data quality issue could be an indicator of a badly written unit test. So, data dependent unit tests were re-written to reduce the likelihood of a red light due to bad data. In many cases, necessary data was inserted into the test environment to be able to accurately run its unit tests. It makes sense to say that by making the data more robust then the test becomes more robust if it is dependent on this data. Of course, this worked well! Cost of coverage, i.e., writing unit tests for already existing code: There was the problem of unit test coverage. There were thousands of methods that had no unit tests. So, a sizeable amount of man days would be needed to create those. As this would be too difficult to provide a business case, it was decided that unit tests would be used for any new public method going forward. Those that did not have a unit test were termed 'potentially infra red'. An intestesting point here is that static methods were a moot point in how it would be possible to uniquely determine how a specific static method had failed. Cost of bespoke releases: Nant scripts only go so far. They are not that useful for, say, CMS dependent builds for EPiServer, CMS, or any UI oriented database deployment. These are the types of issues that occured on the build server for hourly test runs and overnight QA builds. I entertain that these to be unnecessary as a build master can perform these tasks manually at the time of release, esp., with a one man band and a small build. So, single step builds have not justified use of CI in my experience. What about the more complex, multistep builds? These can be a pain to build, especially without a Nant script. So, even having created one, these were no more successful. The costs of fixing the red light issues outweighed the benefits. Eventually, developers lost interest and questioned the validity of the red light. Having given it a fair try, I believe that CI is expensive and there is a lot of working around the edges instead of just getting the job done. It's more cost effective to employ experienced developers who do not make a mess of large projects than introduce and maintain an alarm system. This is the case even if those developers leave. It doesn't matter if a good developer leaves because processes that he follows would ensure that he writes requirement specs, design specs, sticks to the coding guidelines, and comments his code so that it is readable. All this is reviewed. If this is not happening then his team leader is not doing his job, which should be picked up by his manager and so on. For CI to work, it is not enough to just write unit tests, attempt to maintain full coverage, and ensure a working infrastructure for sizable systems. The bottom line: One might question whether fixing as many bugs before release is even desirable from a business prespective. CI involves a lot of work to capture a handful of bugs that the customer could identify in UAT or the company could get paid for fixing as part of a client service agreement when the warranty period expires anyway.

Read the article

Responding to the page unload in a managed bean

- by frank.nimphius

Though ADF Faces provides an uncommitted data warning functionality, developers may have the requirement to respond to the page unload event within custom application code, programmed in a managed bean. The af:clientListener tag that is used in ADF Faces to listen for JavaScript and ADF Faces client component events does not provide the option to listen for the unload event. So this often recommended way of implementing JavaScript in ADF Faces does not work for this use case. To send an event from JavaScript to the server, ADF Faces provides the af:serverListener tag that you use to queue a CustomEvent that invokes method in a managed bean. While this is part of the solution, during testing, it turns out, the browser native JavaScript unload event itself is not very helpful to send an event to the server using the af:serverListener tag. The reason for this is that when the unload event fires, the page already has been unloaded and the ADF Faces AdfPage object needed to queue the custom event already returns null. So the solution to the unload page event handling is the unbeforeunload event, which I am not sure if all browsers support them. I tested IE and FF and obviously they do though. To register the beforeunload event, you use an advanced JavaScript programming technique that dynamically adds listeners to page events. <af:document id="d1" onunload="performUnloadEvent" clientComponent="true"> <af:resource type="javascript"> window.addEventListener('beforeunload', function (){performUnloadEvent()},false) function performUnloadEvent(){ //note that af:document must have clientComponent="true" set //for JavaScript to access the component object var eventSource = AdfPage.PAGE.findComponentByAbsoluteId('d1'); //var x and y are dummy variables obviously needed to keep the page //alive for as long it takes to send the custom event to the server var x = AdfCustomEvent.queue(eventSource, "handleOnUnload", {args:'noargs'},false); //replace args:'noargs' with key:value pairs if your event needs to //pass arguments and values to the server side managed bean. var y = 0; } </af:resource> <af:serverListener type="handleOnUnload" method="#{UnloadHandler.onUnloadHandler}"/> // rest of the page goes here … </af:document> The managed bean method called by the custom event has the following signature: public void onUnloadHandler(ClientEvent clientEvent) { } I don't really have a good explanation for why the JavaSCript variables "x" and "y" are needed, but this is how I got it working. To me it ones again shows how fragile custom JavaScript development is and why you should stay away from using it whenever possible. Note: If the unload event is produced through navigation in JavaServer Faces, then there is no need to use JavaScript for this. If you know that navigation is performed from one page to the next, then the action you want to perform can be handled in JSF directly in the context of the lifecycle.

Read the article

Build 2012, some thoughts..

- by Dennis Vroegop

I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

Read the article

Restrict number of characters to be typed for af:autoSuggestBehavior

- by Arunkumar Ramamoorthy

When using AutoSuggestBehavior for a UI Component, the auto suggest list is displayed as soon as the user starts typing in the field. In this article, we will find how to restrict the autosuggest list to be displayed till the user types in couple of characters. This would be more useful in the low latency networks and also the autosuggest list is bigger. We could display a static message to let the user know that they need to type in more characters to get a list for picking a value from. Final output we would expect is like the below image Lets see how we can implement this. Assuming we have an input text for the users to enter the country name and an autosuggest behavior is added to it. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior /> </af:inputText> Also, assuming we have a VO (we'll name it as CountryView for this example), with a view criteria to filter out the VO based on the bind variable passed. Now, we would generate View Impl class from the java node (including bind variables) and then expose the setter method of the bind variable to client interface. In the View layer, we would create a tree binding for the VO and the method binding for the setter method of the bind variable exposed above, in the pagedef file As we've already added an input text and an autosuggestbehavior for the test, we would not need to build the suggested items for the autosuggest list.Let us add a method in the backing bean to return us List of select items to be bound to the autosuggest list. padding: 5px; background-color: #fbfbfb; min-height: 40px; width: 544px; height: 168px; overflow: auto;"> public List onSuggest(String searchTerm) { ArrayList<SelectItem> selectItems = new ArrayList<SelectItem>(); if(searchTerm.length()>1) { //get access to the binding context and binding container at runtime BindingContext bctx = BindingContext.getCurrent(); BindingContainer bindings = bctx.getCurrentBindingsEntry(); //set the bind variable value that is used to filter the View Object //query of the suggest list. The View Object instance has a View //Criteria assigned OperationBinding setVariable = (OperationBinding) bindings.get("setBind_CountryName"); setVariable.getParamsMap().put("value", searchTerm); setVariable.execute(); //the data in the suggest list is queried by a tree binding. JUCtrlHierBinding hierBinding = (JUCtrlHierBinding) bindings.get("CountryView1"); //re-query the list based on the new bind variable values hierBinding.executeQuery(); //The rangeSet, the list of queries entries, is of type //JUCtrlValueBndingRef. List<JUCtrlValueBindingRef> displayDataList = hierBinding.getRangeSet(); for (JUCtrlValueBindingRef displayData : displayDataList){ Row rw = displayData.getRow(); //populate the SelectItem list selectItems.add(new SelectItem( (String)rw.getAttribute("Name"), (String)rw.getAttribute("Name"))); } } else{ SelectItem a = new SelectItem("","Type in two or more characters..","",true); selectItems.add(a); } return selectItems; } So, what we are doing in the above method is, to check the length of the search term and if it is more than 1 (i.e 2 or more characters), the return the actual suggest list. Otherwise, create a read only select item new SelectItem("","Type in two or more characters..","",true); and add it to the list of suggested items to be displayed. The last parameter for the SelectItem (boolean) is to make it as readOnly, so that users would not be able to select this static message from the displayed list. Finally, bind this method to the input text's autosuggestbehavior's suggestedItems property. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior suggestedItems="#{AutoSuggestBean.onSuggest}"/> </af:inputText>

Read the article

DataContractSerializer: type is not serializable because it is not public?

- by Michael B. McLaughlin

I recently ran into an odd and annoying error when working with the DataContractSerializer class for a WP7 project. I thought I’d share it to save others who might encounter it the same annoyance I had. So I had an instance of ObservableCollection<T> that I was trying to serialize (with T being a class I wrote for the project) and whenever it would hit the code to save it, it would give me: The data contract type 'ProjectName.MyMagicItemsClass' is not serializable because it is not public. Making the type public will fix this error. Alternatively, you can make it internal, and use the InternalsVisibleToAttribute attribute on your assembly in order to enable serialization of internal members - see documentation for more details. Be aware that doing so has certain security implications. This, of course, was malarkey. I was trying to write an instance of MyAwesomeClass that looked like this: [DataContract] public class MyAwesomeClass { [DataMember] public ObservableCollection<MyMagicItemsClass> GreatItems { get; set; } [DataMember] public ObservableCollection<MyMagicItemsClass> SuperbItems { get; set; } public MyAwesomeClass { GreatItems = new ObservableCollection<MyMagicItemsClass>(); SuperbItems = new ObservableCollection<MyMagicItemsClass>(); } } That’s all well and fine. And MyMagicItemsClass was also public with a parameterless public constructor. It too had DataContractAttribute applied to it and it had DataMemberAttribute applied to all the properties and fields I wanted to serialize. Everything should be cool, but it’s not because I keep getting that “not public” exception. I could tell you about all the things I tried (generating a List<T> on the fly to make sure it wasn’t ObservableCollection<T>, trying to serialize the the Collections directly, moving it all to a separate library project, etc.), but I want to keep this short. In the end, I remembered my the “Debug->Exceptions…” VS menu option that brings up the list of exception-related circumstances under which the Visual Studio debugger will break. I checked the “Thrown” checkbox for “Common Language Runtime Exceptions”, started the project under the debugger, and voilà: the true problem revealed itself. Some of my properties had fairly elaborate setters whose logic I wanted to ignore. So for some of them, I applied an IgnoreDataMember attribute to them and applied the DataMember attribute to the underlying fields instead. All of which, in line with good programming practices, were private. Well, it just so happens that WP7 apps run in a “partial trust” environment and outside of “full trust”-land, DataContractSerializer refuses to serialize or deserialize non-public members. Of course that exception was swallowed up internally by .NET so all I ever saw was that bizarre message about things that I knew for certain were public being “not public”. I changed all the private fields I was serializing to public and everything worked just fine. In hindsight it all makes perfect sense. The serializer uses reflection to build up its graph of the object in order to write it out. In partial trust, you don’t want people using reflection to get at non-public members of an object since there are potential security problems with allowing that (you could break out of the sandbox pretty quickly by reflecting and calling the appropriate methods and cause some havoc by reflecting and setting the appropriate fields in certain circumstances. The fact that you cannot reflect your own assembly seems a bit heavy-handed, but then again I’m not a compiler writer or a framework designer and I have no idea what sorts of difficulties would go into allowing that from a compilation standpoint or what sorts of security problems allowing that could present (if any). So, lesson learned. If you get an incomprehensible exception message, turn on break on all thrown exceptions and try running it again (it might take a couple of tries, depending) and see what pops out. Chances are you’ll find the buried exception that actually explains what was going on. And if you’re getting a weird exception when trying to use DataContractSerializer complaining about public types not being public, chances are you’re trying to serialize a private or protected field/property.

Read the article

WPF: Running code when Window rendering is completed

- by Ilya Verbitskiy

WPF is full of surprises. It makes complicated tasks easier, but at the same time overcomplicates easy task as well. A good example of such overcomplicated things is how to run code when you’re sure that window rendering is completed. Window Loaded event does not always work, because controls might be still rendered. I had this issue working with Infragistics XamDockManager. It continued rendering widgets even when the Window Loaded event had been raised. Unfortunately there is not any “official” solution for this problem. But there is a trick. You can execute your code asynchronously using Dispatcher class. Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); This code should be added to your Window Loaded event handler. It is executed when all controls inside your window are rendered. I created a small application to prove this idea. The application has one window with a few buttons. Each button logs when it has changed its actual size. It also logs when Window Loaded event is raised, and, finally, when rendering is completed. Window’s layout is straightforward. 1: <Window x:Class="OnRendered.MainWindow" 2: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" 3: xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" 4: Title="Run the code when window rendering is completed." Height="350" Width="525" 5: Loaded="OnWindowLoaded"> 6: <Window.Resources> 7: <Style TargetType="{x:Type Button}"> 8: <Setter Property="Padding" Value="7" /> 9: <Setter Property="Margin" Value="5" /> 10: <Setter Property="HorizontalAlignment" Value="Center" /> 11: <Setter Property="VerticalAlignment" Value="Center" /> 12: </Style> 13: </Window.Resources> 14: <StackPanel> 15: <Button x:Name="Button1" Content="Button 1" SizeChanged="OnSizeChanged" /> 16: <Button x:Name="Button2" Content="Button 2" SizeChanged="OnSizeChanged" /> 17: <Button x:Name="Button3" Content="Button 3" SizeChanged="OnSizeChanged" /> 18: <Button x:Name="Button4" Content="Button 4" SizeChanged="OnSizeChanged" /> 19: <Button x:Name="Button5" Content="Button 5" SizeChanged="OnSizeChanged" /> 20: </StackPanel> 21: </Window> SizeChanged event handler simply traces that the event has happened. 1: private void OnSizeChanged(object sender, SizeChangedEventArgs e) 2: { 3: Button button = (Button)sender; 4: Trace.WriteLine("Size has been changed", button.Name); 5: } Window Loaded event handler is slightly more interesting. First it scheduler the code to be executed using Dispatcher class, and then logs the event. 1: private void OnWindowLoaded(object sender, RoutedEventArgs e) 2: { 3: Dispatcher.BeginInvoke(new Action(() => Trace.WriteLine("DONE!", "Rendering")), DispatcherPriority.ContextIdle, null); 4: Trace.WriteLine("Loaded", "Window"); 5: } As the result I had seen these trace messages. 1: Button5: Size has been changed 2: Button4: Size has been changed 3: Button3: Size has been changed 4: Button2: Size has been changed 5: Button1: Size has been changed 6: Window: Loaded 7: Rendering: DONE! You can find the solution in GitHub.

Read the article

Updated Agenda for OTN Architect Day Los Angeles (Oct 25)

- by Bob Rhubart

Here's the latest information on the session schedule and content for Oracle Technology Network Architect Day in Los Angeles on October 25, 2012. Registration is open, but seating is limited. When: Thursday October 25 12, 2012 8:30am – 5:00pm Where: Sofitel Los Angeles 8555 Beverly Boulevard Los Angeles, CA 90048 Agenda Time Session Title Room 8:30 am - 9:00 am Registration and Continental Breakfast 9:00 am - 9:15 am Welcome and Opening Comments | Bob Rhubart Beverly Ballroom 9:15 am - 10:00 am Engineered Systems: Oracle's Vision for the Future | Ralf Dossmann Oracle's Exadata and Exalogic are impressive products in their own right. But working in combination they deliver unparalleled transaction processing performance with up to a 30x increase over existing legacy systems, with the lowest cost of ownership over a 3 or 5 year basis than any other hardware. In this session you'll learn how to leverage Oracle's Engineered Systems within your enterprise to deliver record-breaking performance at the lowest TCO. Beverly Ballroom 10:00 am - 10:30 am Monitoring and Managing Applications in the Cloud | Basheer Khan Oracle offers a broad portfolio of software and hardware products and services to enable public, private and hybrid clouds to power the enterprise. However, enterprise cloud computing presents new management challenges, that need to be addressed to realize the economic benefits of cloud computing. In this session you will learn about the methods and tools you can use to proactively monitor your end-to-end Oracle Applications environment in the cloud, define service-level objectives, gain insight into your end users, and troubleshoot performance problems from a single console. Beverly Ballroom 10:30 am - 10:45 am Break 10:45 am - 11:30 am Breakout Sessions (pick one) Cloud Computing - Making IT Simple | Dr. James Baty The road to Cloud Computing is not without a few bumps. This session will help to smooth out your journey by tackling some of the potential complications. We'll examine whether standardization is a prerequisite for the Cloud. We'll look at why refactoring isn't just for application code. We'll check out deployable entities and their simplification via higher levels of abstraction. And we'll close out the session with a look at engineered systems and modular clouds. Beverly Ballroom Innovations in Grid Computing with Oracle Coherence | Ashok Aletty Learn how Oracle Coherence can increase the availability, scalability and performance of your existing applications with its advanced low-latency data-grid technologies. Also hear some interesting industry-specific use cases that customers had implemented and how Oracle is integrating Coherence into its Enterprise Java stack. Hollywood Room 11:30 am - 12:15 pm Breakout Sessions (pick one) Enterprise Strategy for Cloud Security | Dave Chappelle Security is high on the list of concerns for many organizations as they evaluate their cloud computing options. This session will examine security in the context of the various forms of cloud computing. We'll consider technical and non-technical aspects of security, and discuss several strategies for cloud computing, from both the consumer and producer perspectives. Beverly Ballroom Oracle Enterprise Manager | Perren Walker This session examines new Oracle Enterprise Manager monitoring, administration, and management features for Oracle Exalogic. It focuses on two management themes: cloud management related to virtualization and applications-to-disk management. For private cloud management, it discusses virtualization management features providing an enhanced set of application deployment capabilities enabling IaaS as well as PaaS interactions. Then from an end-to-end perspective, it covers the specific capabilities and—where applicable—best practices for machine, cloud, middleware, and application administration. Hollywood Room 12:15 pm - 1:15 pm Lunch Beverly Ballroom Lounge 1:15 pm - 2:00 pm Panel Discussion - Q&A with session speakers Beverly Ballroom 2:00 pm - 2:45 pm Breakout Sessions (pick one) Oracle Cloud Reference Architecture | Anbu Krishnaswamy Cloud initiatives are beginning to dominate enterprise IT roadmaps. Successful adoption of Cloud and the subsequent governance challenges warrant a Cloud reference architecture that is applied consistently across the enterprise. This presentation will answer the important questions: What exactly is a Cloud, why you need it, what changes it will bring to the enterprise, and what are the key capabilities of a Cloud infrastructure are - using Oracle's Cloud Reference Architecture, which is part of the IT Strategies from Oracle (ITSO) Cloud Enterprise Technology Strategy ETS). Beverly Ballroom 21st Century SOA | Jeff Davies Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite's orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. We'll also take a special look at the convergence of SOA & BPM using Oracle's Unified technology stack. Hollywood Room 2:45 pm - 3:00 pm Break 3:00 pm - 4:00 pm Roundtable Discussion Beverly Ballroom 4:00 pm - 4:15 pm Closing Comments & Readouts from Roundtables Beverly Ballroom 4:15 pm - 5:00 pm Networking / Reception Beverly Ballroom Lounge Note: Session schedule and content subject to change.

Read the article

Session and Pop Up Window

- by imran_ku07

Introduction : Session is the secure state management. It allows the user to store their information in one page and access in another page. Also it is so much powerful that store any type of object. Every user's session is identified by their cookie, which client presents to server. But unfortunately when you open a new pop up window, this cookie is not post to server with request, due to which server is unable to identify the session data for current user. In this Article i will show you how to handle this situation, Description : During working in a application, i was getting an Exception saying that Session is null, when a pop window opens. After seeing the problem more closely i found that ASP.NET_SessionId cookie for parent page is not post in cookie header of child (popup) window. Therefore for making session present in both parent and child (popup) window, you have to present same cookie. For cookie sharing i passed parent SessionID in query string, window.open('http://abc.com/s.aspx?SASID=" & Session.SessionID &','V'); and in Application_PostMapRequestHandler application Event, check if the current request has no ASP.NET_SessionId cookie and SASID query string is not null then add this cookie to Request before Session is acquired, so that Session data remain same for both parent and popup window. Private Sub Application_PostMapRequestHandler(ByVal sender As Object, ByVal e As EventArgs) If (Request.Cookies("ASP.NET_SessionId") Is Nothing) AndAlso (Request.QueryString("SASID") IsNot Nothing) Then Request.Cookies.Add(New HttpCookie("ASP.NET_SessionId", Request.QueryString("SASID"))) End If End Sub Now access Session in your parent and child window without any problem. How this works : ASP.NET (both Web Form or MVC) uses a cookie (ASP.NET_SessionId) to identify the user who is requesting. Cookies are may be persistent (saved permanently in user cookies ) or non-persistent (saved temporary in browser memory). ASP.NET_SessionId cookie saved as non-persistent. This means that if the user closes the browser, the cookie is immediately removed. This is a sensible step that ensures security. That's why ASP.NET unable to identify that the request is coming from the same user. Therefore every browser instance get it's own ASP.NET_SessionId. To resolve this you need to present the same parent ASP.NET_SessionId cookie to the server when open a popup window. You can confirm this situation by using some tools like Firebug, Fiddler, Summary : Hopefully you will enjoy after reading this article, by seeing that how to workaround the problem of sharing Session between different browser instances by sharing their Session identifier Cookie.

Read the article

How views are changing in future versions of SQL

- by Rob Farley

April is here, and this weekend, SQL v11.0 (previous known as Denali, now known as SQL Server 2012) reaches general availability. And so I thought I’d share some news about what’s coming next. I didn’t hear this at the MVP Summit earlier this year (where there was lots of NDA information given, but I didn’t go), so I think I’m free to share it. I’ve written before about CTEs being query-scoped views. Well, the actual story goes a bit further, and will continue to develop in future versions. A CTE is a like a “temporary temporary view”, scoped to a single query. Due to globally-scoped temporary objects using a two-hashes naming style, and session-scoped (or ‘local’) temporary objects a one-hash naming style, this query-scoped temporary object uses a cunning zero-hash naming style. We see this implied in Books Online in the CREATE TABLE page, but as we know, temporary views are not yet supported in the SQL Server. However, in a breakaway from ANSI-SQL, Microsoft is moving towards consistency with their naming. We know that a CTE is a “common table expression” – this is proving to be a more strategic than you may have appreciated. Within the Microsoft product group, the term “Table Expression” is far more widely used than just CTEs. Anything that can be used in a FROM clause is referred to as a Table Expression, so long as it doesn’t actually store data (which would make it a Table, rather than a Table Expression). You can see this is not just restricted to the product group by doing an internet search for how the term is used without ‘common’. In the past, Books Online has referred to a view as a “virtual table” (but notice that there is no SQL 2012 version of this page). However, it was generally decided that “virtual table” was a poor name because it wasn’t completely accurate, and it’s typically accepted that virtualisation and SQL is frowned upon. That page I linked to says “or stored query”, which is slightly better, but when the SQL 2012 version of that page is actually published, the line will be changed to read: “A view is a stored table expression (STE)”. This change will be the first of many. During the SQL 2012 R2 release, the keyword VIEW will become deprecated (this will be SQL v11 SP1.5). Three versions later, in SQL 14.5, you will need to be in compatibility mode 140 to allow “CREATE VIEW” to work. Also consistent with Microsoft’s deprecation policy, the execution of any query that refers to an object created as a view (rather than the new “CREATE STE”), will cause a Deprecation Event to fire. This will all be in preparation for the introduction of Single-Column Table Expressions (to be introduced in SQL 17.3 SP6) which will finally shut up those people waiting for a decent implementation of Inline Scalar Functions. And of course, CTEs are “Common” because the Table Expression definition needs to be repeated over and over throughout a stored procedure. ...or so I think I heard at some point. Oh, and congratulations to all the new MVPs on this April 1st. @rob_farley

Read the article

How to display Sharepoint Data in a Windows Forms Application

- by Michael M. Bangoy

In this post I'm going to demonstrate how to retrieve Sharepoint data and display it on a Windows Forms Application. 1. Open Visual Studio 2010 and create a new Project. 2. In the project template select Windows Forms Application. 3. In order to communicate with Sharepoint from a Windows Forms Application we need to add the 2 Sharepoint Client DLL located in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI. 4. Select the Microsoft.Sharepoint.Client.dll and Microsoft.Sharepoint.Client.Runtime.dll. (Your solution should look like the one below) 5. Open the Form1 in design view and from the Toolbox menu Add a Button, TextBox, Label and DataGridView on the form. 6. Next double click on the Load Button, this will open the code view of the form. Add Using statement to reference the Sharepoint Client Library then create two method for the Load Site Title and LoadList. See below: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Security; using System.Windows.Forms; using SP = Microsoft.SharePoint.Client; namespace ClientObjectModel { public partial class Form1 : Form { // url of the Sharepoint site const string _context = "theurlofthesharepointsite"; public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { } private void getsitetitle() { SP.ClientContext context = new SP.ClientContext(_context); SP.Web _site = context.Web; context.Load(_site); context.ExecuteQuery(); txttitle.Text = _site.Title; context.Dispose(); } private void loadlist() { using (SP.ClientContext _clientcontext = new SP.ClientContext(_context)) { SP.Web _web = _clientcontext.Web; SP.ListCollection _lists = _clientcontext.Web.Lists; _clientcontext.Load(_lists); _clientcontext.ExecuteQuery(); DataTable dt = new DataTable(); DataColumn column; DataRow row; column = new DataColumn(); column.DataType = Type.GetType("System.String"); column.ColumnName = "List Title"; dt.Columns.Add(column); foreach (SP.List listitem in _lists) { row = dt.NewRow(); row["List Title"] = listitem.Title; dt.Rows.Add(row); } dataGridView1.DataSource = dt; } } private void cmdload_Click(object sender, EventArgs e) { getsitetitle(); loadlist(); } } } 7. That’s it. Hit F5 to run the application then click the Load Button. Your screen should like the one below. Hope this helps.

Read the article

VirtualBox appliance for the Oracle Communications Service Delivery Platform (SDP) Products

- by chlander

It's been quite awhile since we last blogged. This blog is written by Leif Lourie, a Curriculum Developer for the Oracle Communications Service Delivery Platform (SDP) products. For the last 8 years, Leif has worked as a Curriculum Developer for many of the telecom-oriented products that Oracle offers. He has been working in the telecom industry for about 25 years and has also worked as a software developer, project manager, and solutions architect. He is currently working on courseware for an upcoming release for one of the Service Delivery Platform products. Thanks to Leif not only for this blog, but for making the VM described in the blog available. Cheryl Lander, Oracle Communications InfoDev Senior Director To be able to download, install and test a product within a day is many times very important for people that are doing the primary evaluation of a software product. If it takes longer, it will require a bigger effort, like a proof-of-concept project with many people involved. Of course, if the product is chosen for a more thorough test, it will probably happen anyway, but then maybe with focus on integration instead of product features. We have a long tradition of creating complex software that is easy to install and test and we have often been praised for the ease of getting our products up and running. One key for this has been that there has always been an installer for Windows, as well as for the production environments that usually are Unix and Linux. And, the windows installer has, in most cases, been released for developing and testing purposes. Lately, this has changed. Our products are very seldom released for the Windows platform, at all. And even the Linux versions are almost always released for 64-bit systems. This is creating problems for many of the people that want to try out our products, since few have access to a 64-bit Linux system of the right platform. Most of us are using a laptop with Windows or Mac OS. Some of us are using Linux or Solaris, but probably a non certified distribution for the product you want to test. My job, among other things, is to develop hands-on practices for our products. For me, it is crucial to have access to environments for installing and using our products. For this reason I have been using virtual machines for many years.I have a ready-made base system, with the necessary tools installed for all the products I create hands-on practices for. Whenever I start working on hands-on practices for a new product or a new version, I just copy the base system and start working with a clean slate. This saves me a lot of time! Now, I would like to start saving time for my favorite student: You! If you are using our products and regularly test new versions you might benefit from the virtual machine that is now available on Oracle Technology Network: The Virtual Machine for the Oracle Communications Service Delivery Platform (SDP) Products. This virtual machine contains an installation of the 64-bit version of Oracle Enterprise Linux, version 6. It also has Oracle Database Express Edition (XE), Oracle Java and Oracle Enterprise Pack for Eclipse installed. By using Oracle VM VirtualBox you may use Windows, OS X, Linux or Solaris on your laptop. VirtualBox can be installed on top of any of these platforms and give you the ability to run virtual machines in your laptop. After downloading and starting the virtual machine you will also need to download the installation files for the product you want to test; for example Oracle Communications Services Gatekeeper or Oracle Communications Online Mediation Controller. In some cases there are lessons and practices available for the products. The freely available courses are listed in Oracle Learning Library as a Collection of Oracle Communications Service Delivery Platform Courses. As time goes by, we will make this list collection bigger. Also, the goal is to update the virtual machine about one to two times per year. So you will always be able to get a well maintained virtual machine for the Service Delivery Platform products from us. We Value Your Feedback If you would like to suggest improvements or report issues on any of the product documentation, curriculum, or training produced by the Oracle Communications Information Development team, you can use these channels: Email [email protected]. Post a comment on this blog. Thanks for reading!

Read the article

C++ OpenGL wireframe cube rendering blank

- by caleb.breckon

I'm just trying to draw a bunch of lines that make up a "cube". I can't for the life of me figure out why this is producing a black screen. The debugger does not break at any point. I'm sure it's a problem with my pointers, as I'm only decent at them in regular c++ and in OpenGL it gets even worse. const char* vertexSource = "#version 150\n" "in vec3 position;" "void main() {" " gl_Position = vec4(position, 1.0);" "}"; const char* fragmentSource = "#version 150\n" "out vec4 outColor;" "void main() {" " outColor = vec4(1.0, 1.0, 1.0, 1.0);" "}"; int main() { initializeGLFW(); // Initialize GLEW glewExperimental = GL_TRUE; glewInit(); // Create Vertex Array Object GLuint vao; glGenVertexArrays(1, &vao); glBindVertexArray(vao); // Create a Vertex Buffer Object and copy the vertex data to it GLuint vbo; glGenBuffers( 1, &vbo ); float vertices[] = { 1.0f, 1.0f, 1.0f, // Vertex 0 (X, Y, Z) -1.0f, 1.0f, 1.0f, // Vertex 1 (X, Y, Z) -1.0f, -1.0f, 1.0f, // Vertex 2 (X, Y, Z) 1.0f, -1.0f, 1.0f, // Vertex 3 (X, Y, Z) 1.0f, 1.0f, -1.0f, // Vertex 4 (X, Y, Z) -1.0f, 1.0f, -1.0f, // Vertex 5 (X, Y, Z) -1.0f, -1.0f, -1.0f, // Vertex 6 (X, Y, Z) 1.0f, -1.0f, -1.0f // Vertex 7 (X, Y, Z) }; GLuint indices[] = { 0, 1, 1, 2, 2, 3, 3, 0, 4, 5, 5, 6, 6, 7, 7, 4, 0, 4, 1, 5, 2, 6, 3, 7 }; glBindBuffer( GL_ARRAY_BUFFER, vbo ); glBufferData( GL_ARRAY_BUFFER, sizeof( vertices ), vertices, GL_STATIC_DRAW ); //glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vbo); //glBufferData( GL_ELEMENT_ARRAY_BUFFER, sizeof( indices ), indices, GL_STATIC_DRAW ); // Create and compile the vertex shader GLuint vertexShader = glCreateShader( GL_VERTEX_SHADER ); glShaderSource( vertexShader, 1, &vertexSource, NULL ); glCompileShader( vertexShader ); // Create and compile the fragment shader GLuint fragmentShader = glCreateShader( GL_FRAGMENT_SHADER ); glShaderSource( fragmentShader, 1, &fragmentSource, NULL ); glCompileShader( fragmentShader ); // Link the vertex and fragment shader into a shader program GLuint shaderProgram = glCreateProgram(); glAttachShader( shaderProgram, vertexShader ); glAttachShader( shaderProgram, fragmentShader ); glBindFragDataLocation( shaderProgram, 0, "outColor" ); glLinkProgram (shaderProgram); glUseProgram( shaderProgram); // Specify the layout of the vertex data GLint posAttrib = glGetAttribLocation( shaderProgram, "position" ); glEnableVertexAttribArray( posAttrib ); glVertexAttribPointer( posAttrib, 3, GL_FLOAT, GL_FALSE, 0, 0 ); // Main loop while(glfwGetWindowParam(GLFW_OPENED)) { // Clear the screen to black glClearColor( 0.0f, 0.0f, 0.0f, 1.0f ); glClear( GL_COLOR_BUFFER_BIT ); // Draw lines from 2 vertices glDrawElements(GL_LINES, sizeof(indices), GL_UNSIGNED_INT, indices ); // Swap buffers glfwSwapBuffers(); } // Clean up glDeleteProgram( shaderProgram ); glDeleteShader( fragmentShader ); glDeleteShader( vertexShader ); //glDeleteBuffers( 1, &ebo ); glDeleteBuffers( 1, &vbo ); glDeleteVertexArrays( 1, &vao ); glfwTerminate(); exit( EXIT_SUCCESS ); }

Read the article

Doubts about several best practices for rest api + service layer

- by TheBeefMightBeTough

I'm going to be starting a project soon that exposes a restful api for business intelligence. It may not be limited to a restful api, so I plan to delegate requests to a service layer that then coordinates multiple domain objects (each of which have business logic local to the object). The api will likely have many calls as it is a long-term project. While thinking about the design, I recalled a few best practices. 1) Use command objects at the controller layer (I'm using Spring MVC). 2) Use DTOs at the service layer. 3) Validate in both the controller and service layer, though for different reasons. I have my doubts about these recommendations. 1) Using command objects adds a lot of extra single-purpose classes (potentially one per request). What exactly is the benefit? Annotation based validation can be done using this approach, sure. What if I have two requests that take the same parameters, but have different validation requirements? I would have to have two different classes with exactly the same members but different annotations? Bleh. 2) I have heard that using DTOs is preferable to parameters because it makes for more maintainable code down the road (say, e.g., requirements change and the service parameters need to be altered). I don't quite understand this. Shouldn't an api be more-or-less set in stone? I would understand that in the early phases of a project (or, especially, an entire company) the domain itself will not be well understood, and thus core domain objects may change along with the apis that manipulate these objects. At this point however the number of api methods should be small and their dependents few, so changes to the methods could easily be tolerated from a maintainability standpoint. In a large api with many methods and a substantial domain model, I would think having a DTO for potentially each domain object would become unwieldy. Am I misunderstanding something here? 3) I see validation in the controller and service layer as redundant in most cases. Why would I validate that parameters are not null and are in general well formed in the controller if the service is going to do exactly the same (and more). Couldn't I just do all the validation in the service and throw a runtime exception with a list of bad parameters then catch that in the controller to make the error messages more presentable? Better yet, couldn't I just make the error messages user-friendly in the service and let the exception trickle up to a global handler (ControllerAdvice in spring, for example)? Is there something wrong with either of these approaches? (I do see a use case for controller validation if the input does not map one-to-one with the service input, but since the controllers are for a rest api and not forms, the api parameters will probably map directly to service parameters.) I do also have a question about unchecked vs checked exceptions. Namely, I'm not really sure why I'd ever want to use a checked exception. Every time I have seen them used they just get wrapped into general exceptions (DomainException, SystemException, ApplicationException, w/e) to reduce the signature length of methods, or devs catch Exception rather than dealing with the App1Exception, App2Exception, Sys1Exception, Sys2Exception. I don't see how either of these practices is very useful. Why not just use unchecked exceptions always and catch the ones you actually do care about? You could just document what unchecked exceptions the method throws.

Read the article

Myths about Coding Craftsmanship part 2

- by tom

Myth 3: The source of all bad code is inept developers and stupid people When you review code is this what you assume? Shame on you. You are probably making assumptions in your code if you are assuming so much already. Bad code can be the result of any number of causes including but not limited to using dated techniques (like boxing when generics are available), not following standards (“look how he does the spacing between arguments!” or “did he really just name that variable ‘bln_Hello_Cats’?”), being redundant, using properties, methods, or objects in a novel way (like switching on button.Text between “Hello World” and “Hello World “ //clever use of space character… sigh), not following the SOLID principals, hacking around assumptions made in earlier iterations / hacking in features that should be worked into the overall design. The first two issues, while annoying are pretty easy to spot and can be fixed so easily. If your coding team is made up of experienced professionals who are passionate about staying current then these shouldn’t be happening. If you work with a variety of skills, backgrounds, and experience then there will be some of this stuff going on. If you have an opportunity to mentor such a developer who is receptive to constructive criticism don’t be a jerk; help them and the codebase will improve. A little patience can improve the codebase, your work environment, and even your perspective. The novelty and redundancy I have encountered has often been the use of creativity when language knowledge was perceived as unavailable or too time consuming. When developers learn on the job you get a lot of this. Rather than going to MSDN developers will use what they know. Depending on the constraints of their assignment hacking together what they know may seem quite practical. This was not stupid though I often wonder how much time is actually “saved” by hacking. These issues are often harder to untangle if we ever do. They can also grow out of control as we write hack after hack to make it work and get back to some development that is satisfying. Hacking upon an existing hack is what I call “feeding the monster”. Code monsters are anti-patterns and hacks gone wild. The reason code monsters continue to get bigger is that they keep growing in scope, touching more and more of the application. This is not the result of dumb developers. It is probably the result of avoiding design, not taking the time to understand the problems or anticipate or communicate the vision of the product. If our developers don’t understand the purpose of a feature or product how do we expect potential customers to do so? Forethought and organization are often what is missing from bad code. Developers who do not use the SOLID principals should be encouraged to learn these principals and be given guidance on how to apply them. The time “saved” by giving hackers room to hack will be made up for and then some. Not as technical debt but as shoddy work that if not replaced will be struggled with again and again. Bad code is not the result of dumb developers (usually) it is the result of trying to do too much without the proper resources and neglecting the right thing that needs doing with the first thoughtless thing that comes into our heads. Object oriented code is all about relationships between objects. Coders who believe their coworkers are all fools tend to write objects that are difficult to work with, not eager to explain themselves, and perform erratically and irrationally. If you constantly find you are surrounded by idiots you may want to ask yourself if you are being unreasonable, if you are being closed minded, of if you have chosen the right profession. Opening your mind up to the idea that you probably work with rational, well-intentioned people will probably make you a better coder and it might even make you less grumpy. If you are surrounded by jerks who do not engage in the exchange of ideas who do not care about their customers or the durability of the code you are building together then I suggest you find a new place to work. Myth 4: Customers don’t care about “beautiful” code Craftsmanship is customer focused because it means that the job was done right, the product will withstand the abuse, modifications, and scrutiny of our customers. Users can appreciate a predictable timeline for a release, a product delivered on time and on budget, a feature set that does not interfere with the task(s) it is supporting, quick turnarounds on exception messages, self healing issues, and less issues. These are all hindered by skimping on craftsmanship. When we write data access and when we write reusable code. What do you think? Does bad code come primarily from low IQ individuals? Do customers care about beautiful code?

Read the article

Handling Configuration Changes in Windows Azure Applications

- by Your DisplayName here!

While finalizing StarterSTS 1.5, I had a closer look at lifetime and configuration management in Windows Azure. (this is no new information – just some bits and pieces compiled at one single place – plus a bit of reality check) When dealing with lifetime management (and especially configuration changes), there are two mechanisms in Windows Azure – a RoleEntryPoint derived class and a couple of events on the RoleEnvironment class. You can find good documentation about RoleEntryPoint here. The RoleEnvironment class features two events that deal with configuration changes – Changing and Changed. Whenever a configuration change gets pushed out by the fabric controller (either changes in the settings section or the instance count of a role) the Changing event gets fired. The event handler receives an instance of the RoleEnvironmentChangingEventArgs type. This contains a collection of type RoleEnvironmentChange. This in turn is a base class for two other classes that detail the two types of possible configuration changes I mentioned above: RoleEnvironmentConfigurationSettingsChange (configuration settings) and RoleEnvironmentTopologyChange (instance count). The two respective classes contain information about which configuration setting and which role has been changed. Furthermore the Changing event can trigger a role recycle (aka reboot) by setting EventArgs.Cancel to true. So your typical job in the Changing event handler is to figure if your application can handle these configuration changes at runtime, or if you rather want a clean restart. Prior to the SDK 1.3 VS Templates – the following code was generated to reboot if any configuration settings have changed: private void RoleEnvironmentChanging(object sender, RoleEnvironmentChangingEventArgs e) { // If a configuration setting is changing if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange)) { // Set e.Cancel to true to restart this role instance e.Cancel = true; } } This is a little drastic as a default since most applications will work just fine with changed configuration – maybe that’s the reason this code has gone away in the 1.3 SDK templates (more). The Changed event gets fired after the configuration changes have been applied. Again the changes will get passed in just like in the Changing event. But from this point on RoleEnvironment.GetConfigurationSettingValue() will return the new values. You can still decide to recycle if some change was so drastic that you need a restart. You can use RoleEnvironment.RequestRecycle() for that (more). As a rule of thumb: When you always use GetConfigurationSettingValue to read from configuration (and there is no bigger state involved) – you typically don’t need to recycle. In the case of StarterSTS, I had to abstract away the physical configuration system and read the actual configuration (either from web.config or the Azure service configuration) at startup. I then cache the configuration settings in memory. This means I indeed need to take action when configuration changes – so in my case I simply clear the cache, and the new config values get read on the next access to my internal configuration object. No downtime – nice! Gotcha A very natural place to hook up the RoleEnvironment lifetime events is the RoleEntryPoint derived class. But with the move to the full IIS model in 1.3 – the RoleEntryPoint methods get executed in a different AppDomain (even in a different process) – see here.. You might no be able to call into your application code to e.g. clear a cache. Keep that in mind! In this case you need to handle these events from e.g. global.asax.

Read the article

Using Resources the Right Way

- by BuckWoody

It’s an interesting time in computing technology. At one point there was a dearth of information available for solving a given problem, or educating ourselves on broader topics so that we can solve problems in the future. With dozens, perhaps hundreds or thousands of web sites and content available (for free, in many cases) from vendors, peers, even colleges and universities, it seems like there is actually too much information. Who has the time to absorb all this information and training? Even if you had the inclination, where to start? In fact, it seems so overwhelming that I often hear people saying that they can’t find the training they need, or that vendor X or Y “doesn’t help their users”. On questioning these folks, however, I often find that they – and sometimes I - haven’t put in the effort to learn what resources we have. That’s where blogs, like this one, can help. If you follow a blog, either by checking it often or perhaps subscribing to the Really Simple Syndication (RSS) feed, you’ll be able to spread out the search or create a mental filter for the information you need. But it’s not enough just read a blog or a web page. The creators need real feedback – what doesn’t work, and what does. Yes, you’re allowed to tell a vendor or writer “This helped me because…” so that you reinforce the positives. To be sure, bring up what doesn’t work as well – that’s fine. But be specific, and be constructive. You’d be surprised at how much it matters. I know for a fact at Microsoft we listen – there is a real live person that reads your comments. I’m sure this is true of other vendors, and I also know that most blog authors – yours truly most especially – wants to know what you think. In this blog entry I’d to call your attention to three resources you have at your disposal, and how you can use them to help. I’ll try to bring up things like this from time to time that I find useful, and cover in them in more depth like this. Think of this as a synopsis of a longer set of resources that you can use to filter whether you want to research further, bookmark, or forward on to a circle of friends where you think it might help them. Data Driven Design Concepts http://msdn.microsoft.com/en-us/library/windowsazure/jj156154 I’ll start with a great site that walks you through the process of designing a solution from a data-first perspective. As you know, I believe all computing is merely re-arranging data. If you follow that logic as well, you’ll realize that whenever you create a solution, you should start at the data-end of the application. This resource helps you do that. Even if you don’t use the specific technologies the instructions use, the concepts hold for almost any other technology that deals with data. This should be a definite bookmark for a developer, DBA, or Data Architect. When I mentioned my admiration for this resource here at Microsoft, the team that created it contacted me and asked if I’d share an e-mail address to my readers so that you can comment on it. You’re guaranteed to be heard – you can suggest changes, talk about how useful – or not – it is, and so on. Here’s that address: [email protected] End-to-End Example of a complete Hybrid Application – with Live Demo https://azurestocktrader.cloudapp.net/Default.aspx I learn by example. I also like having ready-made, live, functional demos that show the completed solution at work. If you’ve ever wanted to learn how a complex, complete, hybrid application that bridges on-premises systems with cloud-based databases, code, functions and more, this is it. It’s a stock-trading simulator, and you can get everything from the design to the code itself, or you can just play with the application. It’s running on Windows Azure, the actual production servers we use for everything else. Using a Cloud-Based Service https://azureconfigweb.cloudapp.net/Default.aspx Along with that stock-trading application, you have a full demonstration and usable code sample of a web-based service available. If you’re a developer, this is a style of code you need to understand for everything from iPhone development to a full Service-Oriented Architecture (SOA) environment. So check out these resources. I’ll post more from time to time as I run across them. Hopefully they’ll be as useful to you as they are to me. Oh, and if you have a comment on any of the resources, let them know. And if you have any comments about these or any of my entries, feel free to post away. To quote a famous TV Show: “Hello Seattle – I’m listening…”

Read the article

How to retrieve Sharepoint data from a Windows Forms Application.

- by Michael M. Bangoy

In this demo I'm going to demonstrate how to retrieve Sharepoint data and display it on a Windows Forms Application. 1. Open Visual Studio 2010 and create a new Project. 2. In the project template select Windows Forms Application. 3. In order to communicate with Sharepoint from a Windows Forms Application we need to add the 2 Sharepoint Client DLL located in c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\ISAPI. 4. Select the Microsoft.Sharepoint.Client.dll and Microsoft.Sharepoint.Client.Runtime.dll. That's it we're ready to write our codes. Note: In this example I've added to controls on the form, the controls are Button, TextBox, Label and DataGridView. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Data.Objects; using System.Drawing; using System.Linq; using System.Text; using System.Security; using System.Windows.Forms; using SP = Microsoft.SharePoint.Client; namespace ClientObjectModel { public partial class Form1 : Form { // declare string url of the Sharepoint site string _context = "theurlofyoursharepointsite"; public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { } private void getsitetitle() { SP.ClientContext context = new SP.ClientContext(_context); SP.Web _site = context.Web; context.Load(_site); context.ExecuteQuery(); txttitle.Text = _site.Title; context.Dispose(); } private void loadlist() { using (SP.ClientContext _clientcontext = new SP.ClientContext(_context)) { SP.Web _web = _clientcontext.Web; SP.ListCollection _lists = _clientcontext.Web.Lists; _clientcontext.Load(_lists); _clientcontext.ExecuteQuery(); DataTable dt = new DataTable(); DataColumn column; DataRow row; column = new DataColumn(); column.DataType = Type.GetType("System.String"); column.ColumnName = "List Title"; dt.Columns.Add(column); foreach (SP.List listitem in _lists) { row = dt.NewRow(); row["List Title"] = listitem.Title; dt.Rows.Add(row); } dataGridView1.DataSource = dt; } private void cmdload_Click(object sender, EventArgs e) { getsitetitle(); loadlist(); } } That's it. Running the application and clicking the Load Button will retrieve the Title of the Sharepoint site and display it on the TextBox and also it will retrieve ALL of the Sharepoint List on that site and populate the DataGridView with the List Title. Hope this helps. Thank you.

Read the article

Utility to Script SQL Server Configuration

- by Bill Graziano

I wrote a small utility to script some key SQL Server configuration information. I had two goals for this utility: Assist with disaster recovery preparation Identify configuration changes I’ve released the application as open source through CodePlex. You can download it from CodePlex at the Script SQL Server Configuration project page. The application is a .NET 2.0 console application that uses SMO. It writes its output to a directory that you specify. Disaster Planning ScriptSqlConfig generates scripts for logins, jobs and linked servers. It writes the properties and configuration from the instance to text files. The scripts are designed so they can be run against a DR server in the case of a disaster. The properties and configuration will need to be manually compared. Each job is scripted to its own file. Each linked server is scripted to its own file. The linked servers don’t include the password if you use a SQL Server account to connect to the linked server. You’ll need to store those somewhere secure. All the logins are scripted to a single file. This file includes windows logins, SQL Server logins and any server role membership. The SQL Server logins are scripted with the correct SID and hashed passwords. This means that when you create the login it will automatically match up to the users in the database and have the correct password. This is the only script that I programmatically generate rather than using SMO. The SQL Server configuration and properties are scripted to text files. These will need to be manually reviewed in the event of a disaster. Or you could DIFF them with the configuration on the new server. Configuration Changes These scripts and files are all designed to be checked into a version control system. The scripts themselves don’t include any date specific information. In my environments I run this every night and check in the changes. I call the application once for each server and script each server to its own directory. The process will delete any existing files before writing new ones. This solved the problem I had where the scripts for deleted jobs and linked servers would continue to show up. To see any changes I just need to query the version control system to show many any changes to the files. Database Scripting Utilities that script database objects are plentiful. CodePlex has at least a dozen of them including one I wrote years ago. The code is so easy to write it’s hard not to include that functionality. This functionality wasn’t high on my list because it’s included in a database backup. Unless you specify the /nodb option, the utility will script out many user database objects. It will script one object per file. It will script tables, stored procedures, user-defined data types, views, triggers, table types and user-defined functions. I know there are more I need to add but haven’t gotten around it yet. If there’s something you need, please log an issue and get it added. Since it scripts one object per file these really aren’t appropriate to recreate an empty database. They are really good for checking into source control every night and then seeing what changed. I know everyone tells me all their database objects are in source control but a little extra insurance never hurts. Conclusion I hope this utility will help a few of you out there. My goal is to have it script all server objects that aren’t contained in user databases. This should help with configuration changes and especially disaster recovery.

Read the article

A more elegant way of embedding a SOAP security header in Silverlight 4

- by Your DisplayName here!

The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector { RequestSecurityTokenResponse _rstr; public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr) { _rstr = rstr; } public void AfterReceiveReply(ref Message reply, object correlationState) { } public object BeforeSendRequest(ref Message request, IClientChannel channel) { request.Headers.Add(new IssuedTokenHeader(_rstr)); return null; } } public class IssuedTokenHeaderBehavior : IEndpointBehavior { RequestSecurityTokenResponse _rstr; public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr) { if (rstr == null) { throw new ArgumentNullException(); } _rstr = rstr; } public void ApplyClientBehavior( ServiceEndpoint endpoint, ClientRuntime clientRuntime) { clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr)); } // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient(); var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) { AppliesTo = new EndpointAddress("https://rp/") }; client.IssueCompleted += (s, args) => { _proxy = new StarterServiceContractClient(); _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result)); }; client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

Read the article

Documentation and Test Assertions in Databases

- by Phil Factor

When I first worked with Sybase/SQL Server, we thought our databases were impressively large but they were, by today’s standards, pathetically small. We had one script to build the whole database. Every script I ever read was richly annotated; it was more like reading a document. Every table had a comment block, and every line would be commented too. At the end of each routine (e.g. procedure) was a quick integration test, or series of test assertions, to check that nothing in the build was broken. We simply ran the build script, stored in the Version Control System, and it pulled everything together in a logical sequence that not only created the database objects but pulled in the static data. This worked fine at the scale we had. The advantage was that one could, by reading the source code, reach a rapid understanding of how the database worked and how one could interface with it. The problem was that it was a system that meant that only one developer at the time could work on the database. It was very easy for a developer to execute accidentally the entire build script rather than the selected section on which he or she was working, thereby cleansing the database of everyone else’s work-in-progress and data. It soon became the fashion to work at the object level, so that programmers could check out individual views, tables, functions, constraints and rules and work on them independently. It was then that I noticed the trend to generate the source for the VCS retrospectively from the development server. Tables were worst affected. You can, of course, add or delete a table’s columns and constraints retrospectively, which means that the existing source no longer represents the current object. If, after your development work, you generate the source from the live table, then you get no block or line comments, and the source script is sprinkled with silly square-brackets and other confetti, thereby rendering it visually indigestible. Routines, too, were affected. In our system, every routine had a directly attached string of unit-tests. A retro-generated routine has no unit-tests or test assertions. Yes, one can still commit our test code to the VCS but it’s a separate module and teams end up running the whole suite of tests for every individual change, rather than just the tests for that routine, which doesn’t scale for database testing. With Extended properties, one can get the best of both worlds, and even use them to put blame, praise or annotations into your VCS. It requires a lot of work, though, particularly the script to generate the table. The problem is that there are no conventional names beyond ‘MS_Description’ for the special use of extended properties. This makes it difficult to do splendid things such ensuring the integrity of the build by running a suite of tests that are actually stored in extended properties within the database and therefore the VCS. We have lost the readability of database source code over the years, and largely jettisoned the use of test assertions as part of the database build. This is not unexpected in view of the increasing complexity of the structure of databases and number of programmers working on them. There must, surely, be a way of getting them back, but I sometimes wonder if I’m one of very few who miss them.

Search Results

Search found 30780 results on 1232 pages for 'object oriented modeling'.

Page 588/1232 | < Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595 | Next Page >

- by CliveT

- by Harish Ranganathan

- by manan.goel(at)oracle.com

- by Jalpesh P. Vadgama

- by jamiet

- by Carnotaurus

- by frank.nimphius

- by Dennis Vroegop

- by Arunkumar Ramamoorthy

- by Michael B. McLaughlin

- by Ilya Verbitskiy

- by Bob Rhubart

- by imran_ku07

- by Rob Farley

- by Michael M. Bangoy

- by chlander

- by caleb.breckon

- by TheBeefMightBeTough

- by tom

- by Your DisplayName here!

- by BuckWoody

- by Michael M. Bangoy

- by Bill Graziano

- by Your DisplayName here!

- by Phil Factor

< Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595 | Next Page >