Search Results

Search found 31882 results on 1276 pages for 'mailing list'.

Page 589/1276 | < Previous Page | 585 586 587 588 589 590 591 592 593 594 595 596  | Next Page >

  • Adaptec 5805 not recognized after reboot

    - by Rakedko ShotGuns
    After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

    Read the article

  • The Tab1.java from API Demo has exception.

    - by Kooper
    I don't know why.All my Tab programs have exception.Even from API Demo. Here is the code: package com.example.android.apis.view; import android.app.TabActivity; import android.os.Bundle; import android.widget.TabHost; import android.widget.TabHost.TabSpec; import android.view.LayoutInflater; import android.view.View; public class Tab1 extends TabActivity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); TabHost tabHost = getTabHost(); LayoutInflater.from(this).inflate(R.layout.main,tabHost.getTabContentView(), true); tabHost.addTab(tabHost.newTabSpec("tab1") .setIndicator("tab1") .setContent(R.id.view1)); tabHost.addTab(tabHost.newTabSpec("tab2") .setIndicator("tab2") .setContent(R.id.view2)); tabHost.addTab(tabHost.newTabSpec("tab3") .setIndicator("tab3") .setContent(R.id.view3)); } } Here is the log: 06-13 17:24:38.336: WARN/jdwp(262): Debugger is telling the VM to exit with code=1 06-13 17:24:38.336: INFO/dalvikvm(262): GC lifetime allocation: 2511 bytes 06-13 17:24:38.416: DEBUG/Zygote(30): Process 262 exited cleanly (1) 06-13 17:24:38.456: INFO/ActivityManager(54): Process com.example.android.apis.view (pid 262) has died. 06-13 17:24:38.696: INFO/UsageStats(54): Unexpected resume of com.android.launcher while already resumed in com.example.android.apis.view 06-13 17:24:38.736: WARN/InputManagerService(54): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@44dc4b38 06-13 17:24:48.337: DEBUG/AndroidRuntime(269): AndroidRuntime START <<<<<<<<<<<<<< 06-13 17:24:48.346: DEBUG/AndroidRuntime(269): CheckJNI is ON 06-13 17:24:48.856: DEBUG/AndroidRuntime(269): --- registering native functions --- 06-13 17:24:49.596: DEBUG/ddm-heap(269): Got feature list request 06-13 17:24:50.576: DEBUG/AndroidRuntime(269): Shutting down VM 06-13 17:24:50.576: DEBUG/dalvikvm(269): DestroyJavaVM waiting for non-daemon threads to exit 06-13 17:24:50.576: DEBUG/dalvikvm(269): DestroyJavaVM shutting VM down 06-13 17:24:50.576: DEBUG/dalvikvm(269): HeapWorker thread shutting down 06-13 17:24:50.586: DEBUG/dalvikvm(269): HeapWorker thread has shut down 06-13 17:24:50.586: DEBUG/jdwp(269): JDWP shutting down net... 06-13 17:24:50.586: INFO/dalvikvm(269): Debugger has detached; object registry had 1 entries 06-13 17:24:50.596: ERROR/AndroidRuntime(269): ERROR: thread attach failed 06-13 17:24:50.606: DEBUG/dalvikvm(269): VM cleaning up 06-13 17:24:50.676: DEBUG/dalvikvm(269): LinearAlloc 0x0 used 628628 of 5242880 (11%) 06-13 17:24:51.476: DEBUG/AndroidRuntime(278): AndroidRuntime START <<<<<<<<<<<<<< 06-13 17:24:51.486: DEBUG/AndroidRuntime(278): CheckJNI is ON 06-13 17:24:51.986: DEBUG/AndroidRuntime(278): --- registering native functions --- 06-13 17:24:52.746: DEBUG/ddm-heap(278): Got feature list request 06-13 17:24:53.716: DEBUG/ActivityManager(54): Uninstalling process com.example.android.apis.view 06-13 17:24:53.726: INFO/ActivityManager(54): Starting activity: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=com.example.android.apis.view/.Tab1 } 06-13 17:24:53.876: DEBUG/AndroidRuntime(278): Shutting down VM 06-13 17:24:53.886: DEBUG/dalvikvm(278): DestroyJavaVM waiting for non-daemon threads to exit 06-13 17:24:53.916: DEBUG/dalvikvm(278): DestroyJavaVM shutting VM down 06-13 17:24:53.926: DEBUG/dalvikvm(278): HeapWorker thread shutting down 06-13 17:24:53.936: DEBUG/dalvikvm(278): HeapWorker thread has shut down 06-13 17:24:53.936: DEBUG/jdwp(278): JDWP shutting down net... 06-13 17:24:53.936: INFO/dalvikvm(278): Debugger has detached; object registry had 1 entries 06-13 17:24:53.957: DEBUG/dalvikvm(278): VM cleaning up 06-13 17:24:54.026: ERROR/AndroidRuntime(278): ERROR: thread attach failed 06-13 17:24:54.146: DEBUG/dalvikvm(278): LinearAlloc 0x0 used 638596 of 5242880 (12%) 06-13 17:24:54.286: INFO/ActivityManager(54): Start proc com.example.android.apis.view for activity com.example.android.apis.view/.Tab1: pid=285 uid=10054 gids={1015} 06-13 17:24:54.676: DEBUG/ddm-heap(285): Got feature list request 06-13 17:24:55.006: WARN/ActivityThread(285): Application com.example.android.apis.view is waiting for the debugger on port 8100... 06-13 17:24:55.126: INFO/System.out(285): Sending WAIT chunk 06-13 17:24:55.186: INFO/dalvikvm(285): Debugger is active 06-13 17:24:55.378: INFO/System.out(285): Debugger has connected 06-13 17:24:55.386: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:55.586: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:55.796: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:55.996: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:56.196: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:56.406: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:56.606: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:56.806: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:57.016: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:57.216: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:57.416: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:57.626: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:57.836: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:58.039: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:58.246: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:58.451: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:58.656: INFO/System.out(285): waiting for debugger to settle... 06-13 17:24:58.866: INFO/System.out(285): debugger has settled (1367) 06-13 17:24:59.126: ERROR/gralloc(54): [unregister] handle 0x129980 still locked (state=40000001) 06-13 17:25:03.816: WARN/ActivityManager(54): Launch timeout has expired, giving up wake lock! 06-13 17:25:04.906: WARN/ActivityManager(54): Activity idle timeout for HistoryRecord{44d60e10 com.example.android.apis.view/.Tab1}

    Read the article

  • LUNs disappear after rebooting the ESX/ESXi host

    - by mariolos
    A single LUN among from a group disappeared. Neither the host nor the Vcenter can see it. Four virtual machines on the LUN now are unknown. The strange thing is the LUN is now available in the list when you try to ADD datastore from configuration == storage == Add Datastore But this cannot help me since i need the vms on the lun and i do not get options to add the lun without formating it to VMFS How can i get the lun back or atleast be able to copy the vms from it

    Read the article

  • Which Twitter app do you use?

    - by Jeff Fritz
    It seems like everyone is writing their own Twitter front-end application nowadays. So I must ask: What is your preferred Twitter front-end management application? Please discuss: Form Factor: Desktop, Mobile, Web based OS Support: Windows, Mac, Linux, iPhone, BlackBerry, etc Killer Feature that made you convert Please try to format your responses using the bullet points above. This way, we can all easily compare features. Please list 1 app per response

    Read the article

  • How do I re-enable the IPMI temperature sensors?

    - by NobleUplift
    I've never had a problem reading temperature sensors with ipmitool on my server, but recently the temperature readings started showing up as disabled: # ipmitool sdr list Temp | disabled | ns Temp | disabled | ns Ambient Temp | 21 degrees C | ok CMOS Battery | 0x00 | ok VCORE | 0x00 | ok VDDIO | 0x00 | ok VDDA | 0x00 | ok VTT | 0x00 | ok VCORE | 0x00 | ok VDDIO | 0x00 | ok VDDA | 0x00 | ok VTT | 0x00 | ok VDD 1.2V PG | 0x00 | ok Linear PG | 0x00 | ok I am using OpenIPMI 2.0.19 and ipmitool 1.8.12. How can I re-enable my temperature sensors?

    Read the article

  • My external hard drive letter is increasing each time i plugin it to my laptop, how to solve this pr

    - by Amr ElGarhy
    I have a strange problem, everytime i plugin my external hard drive, its letter increase, "g,h,i,j,k,l,m, then n, and now o" I went to computer manager and did what is described in this question: http://superuser.com/questions/76165/windows-changing-an-external-hard-drives-drive-letter To change the drive letter, but i found that the letters from h to n are all missed and not in the list. How to solve this problem? I am using windows 7 ultimate edition 32. 2GB Ram.

    Read the article

  • Which external USB drives are compatable with 2003 server?

    - by Tony
    I have been using Seagate free agent GO drives on a windows 2003 server for backup. Sometimes I get a "Delayed Write Failed : Windows was unable to save all the data for the file F:\$Mft." error. I emailed Seagate technical support and the reply was "The product is not supported on Windows 2003 server." The WD elements external USB does not list 2003 as a supported OS. What is a good support external USB drive to use with Windows 2003 server?

    Read the article

  • Upgrading disks in WD My Book Studio Edition II

    - by Bryan
    About 18 months ago, I purchased a 1Tb Western Digital My Book Studio Edition II for backup of my home system. It has 2x 500Gb drives in it, which I had configured as RAID 1. One of the disks has now died, and rather than replace like for like, I'd like to replace both drives to increase the capacity (2 x 2Tb would be nice). I'm struggling to find a list of compatible drives, has anyone else upgraded theirs?

    Read the article

  • Batch movie frame extractor?

    - by yegor
    Can anyone suggest a windows applications that will extract x amount of frames from a list of movies that are imported into it. It needs to operate in batch mode. Image Grabber II .net would be perfect... but it wont work under Vista or Windows 7 (64bit) for me.... so Im looking for an alternative.

    Read the article

  • Run Tomcat Service as Different User on Windows 7

    - by sdoca
    I have installed Tomcat6 using the 32-bit/64-bit Windows Service Installer download version. In the setup instructions, it is recommended that "For optimal security, the service should be run as a separate user, with reduced permissions". I created a new local/standard user (Tomcat) to run the service. The Tomcat service is listed in my list of Services and it's running under my user profile. However, I can't figure out how to set/change which user to start it as.

    Read the article

  • Arrow keys don't work in htop on OS X in Terminal

    - by Daniel Huckstep
    Not sure when it happened, or what I did (if anything), but my arrow keys don't work in htop anymore to scroll around. You should be able to press up and down to scroll up and down the process list, but they don't work. Some keys tend to be the equivalent of 'go back' or something. If I'm on the settings screen, left, up and down all go back to the main screen. htop seems to be the only affected program.

    Read the article

  • rsync -c -i flags identical files as different

    - by Scott
    My goal: given a list of files on local server, show any differences to the files with the same absolute path on remote server; e.g. compare local /etc/init.d/apache to same file on remote server. "Difference" for me means different checksum. I don't care about file modification times. I also do not want to sync the files (yet); only show the diffs. I have rsync 3.0.6 on both local and remote servers, which should be able to do what I want. However, it is claiming that local and remote files, even with identical checksums, are still different. Here's the command line: $ rsync --dry-run -avi --checksum --files-from=/home/me/test.txt --rsync-path="cd / && rsync" / me@remote:/ where: "me" = my username; "remote" = remote server hostname current working directory is '/' test.txt contains one line reading "/etc/init.d/apache" OS: Linux 2.6.9 Running cksum on /etc/init.d/apache on both servers yields the same result. The files are the same. However, rsync output is: me@remote's password: building file list ... done .d..t...... etc/ cd+++++++++ etc/init.d/ <f+++++++++ etc/init.d/apache sent 93 bytes received 21 bytes 20.73 bytes/sec total size is 2374 speedup is 20.82 (DRY RUN) The output codes (see http://www.samba.org/ftp/rsync/rsync.html) mean that rsync thinks /etc is identical except for mod time /etc/init.d needs to be changed /etc/init.d/apache will be sent to the remote server I don't understand how, with --checksum option, and the files having identical checksums, that rsync should think they're different. (I've tried with other files having identical mod times, and those files are not flagged as different.) I did run this in /, and made sure (AFAIK) that it's run remotely in /, so even relative pathnames will still be correct. I ran rsync with -avvvi for more debug info, but saw nothing remarkable. I'm wondering: is rsync still looking at file mod times, even with --checksum? am I somehow not setting up the path(s) right? what am I doing wrong?

    Read the article

  • hosts.allow and hosts.deny WHM Host Access Control - what if my IP changes?

    - by beingalex
    I want to use WHM/Cpanel's Host Access Control interface to change some settings in hosts.allow and hosts.deny. I want to block all access to our SSH exept from the IP we have from our office. Daemon Access List Action Comment sshd ALL EXCEPT x.x.x.x deny Deny access from all other IPs apart from ours But I am worried about what happens if our IP changes, which it does about twice a week. How would I get back in to edit the hosts.allow / hosts.deny files?

    Read the article

  • What is the best place to setup system wide environment variables on Linux?

    - by Sorin Sbarnea
    I just want to setup a system wide environment variable, JAVA_HOME for all users, including root user. Requirements: accessible to normal users accessible to root always loaded, not only for bash (gnome-terminal does not start a bash by default) to work on Ubuntu, Debian and optionally Red Hat great if addition could be easily scripted So far here is the no-list: /etc/profile.d/java.sh - not executed if you start a new console from gnome-terminal /etc/profile - same as above ~/.profile - current user only, also any solution assuming ~ would not be acceptable because home directory could be on NIS, and JAVA_HOME could be different.

    Read the article

  • installing a linux iso from within a university network

    - by pepperdreamteam
    In order to install gentoo, I need to connect to a university wireless internet network. It requires a username and password login/authentication. I'm wondering if anyone has any advice in terms of how to configure the internet connection. The Gentoo installation documentation recommends the use of net-setup, pppoe, pptp, dhcp and iwconfig. I can't figure out how to configure this connection, as the only way I understand is to select the network from a list and enter in authentication data from within a browser.

    Read the article

  • iptables : how to correctly allow incoming and outgoing traffic for certain ports?

    - by Rubytastic
    Im trying to get incoming and outgoing traffic to be enabled on specific ports, because I block everything at the end of the iptables rules. INPUT and FORWARD reject. What would be the appropiate way to open certain ports for all traffic incoming and outgoing? From docs I found below but one has to really define both lines? iptables -A INPUT -i eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT I try to open ports for xmpp service and some other deamons running on server. Rules: *filter # Allow all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT -d 127.0.0.0/8 -j REJECT # Accept all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow all outbound traffic - you can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allow HTTP # Prevent DDOS attacks (http://blog.bodhizazen.net/linux/prevent-dos-with-iptables/) # Disallow HTTPS -A INPUT -p tcp --dport 80 -m state --state NEW -m limit --limit 50/minute --limit-burst 200 -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -m limit --limit 50/second --limit-burst 50 -j ACCEPT -A INPUT -p tcp --dport 443 -j DROP # Allow SSH connections # The -dport number should be the same port number you set in sshd_config -A INPUT -p tcp -s <myip> --dport ssh -j ACCEPT -A INPUT -p tcp -s <myip> --dport 5984 -j ACCEPT -A INPUT -p tcp --dport ssh -j REJECT # Attempt to block portscans # Anyone who tried to portscan us is locked out for an entire day. -A INPUT -m recent --name portscan --rcheck --seconds 86400 -j DROP -A FORWARD -m recent --name portscan --rcheck --seconds 86400 -j DROP # Once the day has passed, remove them from the portscan list -A INPUT -m recent --name portscan --remove -A FORWARD -m recent --name portscan --remove # These rules add scanners to the portscan list, and log the attempt. -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A INPUT -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j LOG --log-prefix "Portscan:" -A FORWARD -p tcp -m tcp --dport 139 -m recent --name portscan --set -j DROP # Stop smurf attacks -A INPUT -p icmp -m icmp --icmp-type address-mask-request -j DROP -A INPUT -p icmp -m icmp --icmp-type timestamp-request -j DROP -A INPUT -p icmp -m icmp -j DROP # Drop excessive RST packets to avoid smurf attacks -A INPUT -p tcp -m tcp --tcp-flags RST RST -m limit --limit 2/second --limit-burst 2 -j ACCEPT # Don't allow pings through -A INPUT -p icmp -m icmp --icmp-type 8 -j DROP # Log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

    Read the article

  • How do you stop an FTP Service resetting?

    - by Jenski
    While using an FTP service through the command line, I try to retrieve a directory listing. I get: ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. > ftp: get :Connection reset by peer Any ideas how I should go about resolving this problem? Thanks in advance.

    Read the article

  • Remember Snow Leopard Firewall settings

    - by revelator
    I've got the firewall enabled on my Snow Leopard installation, and it works just fine, except for with EyeTV. Every time I run this app, a popup appears asking if I want to allow it access to the network, even though I've got it added in the application list for allowed apps. Any ideas how I can stop this from asking and just let it be given access?

    Read the article

  • Output iTunes library to HTML or PDF

    - by Brandon
    I'm looking for a piece of software or a script that will take my iTunes library and give me an output (either as HTML or PDF) of simply a list of all the albums I have, preferably as Artist - Album format. Working with iTunes 9 on a Mac.

    Read the article

  • Sorting/Paginating/Filtering Complex Multi-AR Object Tables in Rails

    - by Matt Rogish
    I have a complex table pulled from a multi-ActiveRecord object array. This listing is a combined display of all of a particular user's "favorite" items (songs, messages, blog postings, whatever). Each of these items is a full-fledged AR object. My goal is to present the user with a simplified search, sort, and pagination interface. The user need not know that the Song has a singer, and that the Message has an author -- to the end user both entries in the table will be displayed as "User". Thus, the search box will simply be a dropdown list asking them which to search on (User name, created at, etc.). Internally, I would need to convert that to the appropriate object search, combine the results, and display. I can, separately, do pagination (mislav will_paginate), sorting, and filtering, but together I'm having some problems combining them. For example, if I paginate the combined list of items, the pagination plugin handles it just fine. It is not efficient since the pagination is happening in the app vs. the DB, but let's assume the intended use-case would indicate the vast majority of the users will have less than 30 favorited items and all other behavior, server capabilities, etc. indicates this will not be a bottleneck. However, if I wish to sort the list I cannot sort it via the pagination plugin because it relies on the assumption that the result set is derived from a single SQL query, and also that the field name is consistent throughout. Thus, I must sort the merged array via ruby, e.g. @items.sort_by{ |i| i.whatever } But, since the items do not share common names, I must first interrogate the object and then call the correct sort by. For example, if the user wishes to sort by user name, if the sorted object is a message, I sort by author but if the object is a song, I sort by singer. This is all very gross and feels quite un-ruby-like. This same problem comes into play with the filter. If the user filters on the "parent item" (the message's thread, the song's album), I must translate that to the appropriate collection object method. Also gross. This is not the exact set-up but is close enough. Note that this is a legacy app so changing it is quite difficult, although not impossible. Also, yes there is some DRY that can be done, but don't focus on the style or elegance of the following code. Style/elegance of the SOLUTION is important, however! :D models: class User < ActiveRecord::Base ... has_and_belongs_to_many :favorite_messages, :class_name => "Message" has_and_belongs_to_many :favorite_songs, :class_name => "Song" has_many :authored_messages, :class_name => "Message" has_many :sung_songs, :class_name => "Song" end class Message < ActiveRecord::Base has_and_belongs_to_many :favorite_messages belongs_to :author, :class_name => "User" belongs_to :thread end class Song < ActiveRecord::Base has_and_belongs_to_many :favorite_songs belongs_to :singer, :class_name => "User" belongs_to :album end controller: def show u = User.find 123 @items = Array.new @items << u.favorite_messages @items << u.favorite_songs # etc. etc. @items.flatten! @items = @items.sort_by{ |i| i.created_at } @items = @items.paginate :page => params[:page], :per_page => 20 end def search # Assume user is searching for username like 'Bob' u = User.find 123 @items = Array.new @items << u.favorite_messages.find( :all, :conditions => "LOWER( author ) LIKE LOWER('%bob%')" ) @items << u.favorite_songs.find( :all, :conditions => "LOWER( singer ) LIKE ... " ) # etc. etc. @items.flatten! @items = @items.sort_by{ |i| determine appropriate sorting based on user selection } @items = @items.paginate :page => params[:page], :per_page => 20 end view: #index.html.erb ... <table> <tr> <th>Title (sort ASC/DESC links)</th> <th>Created By (sort ASC/DESC links))</th> <th>Collection Title (sort ASC/DESC links)</th> <th>Created At (sort ASC/DESC links)</th> </tr> <% @items.each |item| do %> <%= render { :partial => "message", :locals => item } if item.is_a? Message %> <%= render { :partial => "song", :locals => item } if item.is_a? Song %> <%end%> ... </table> #message.html.erb # shorthand, not real ruby print out message title, author name, thread title, message created at #song.html.erb # shorthand print out song title, singer name, album title, song created at

    Read the article

< Previous Page | 585 586 587 588 589 590 591 592 593 594 595 596  | Next Page >