Search Results

Search found 12488 results on 500 pages for 'hardware upgrade'.

Page 59/500 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Hardware recommendations / parts list for a modern, quiet ZFS NAS box - 2011-Feb edition [closed]

  - by dandv

  I want to build some really reliable storage for my data, and it seems that ZFS is the only filesystem at the moment that does live checksumming. That rules out DroboPro, so I'm looking to building a quiet ZFS NAS that would start with 4 2TB or larger hard drives. I'd like this system to be very reliable and relatively future-proof for 2-3 years, so I'm willing to invest some $$$ and buy higher end components. I did see questions here and on other forums about low-cost servers, but I'm not looking for those. I'd be super happy to go for an off-the-shelf solution, but I haven't found one that's quiet. I started doing the research (summarized on my wiki), but I realized that it just gets too complicated for what I know as a software dude, and I'm entering the analysis paralysis area. At this point, I'm basically looking for a parts list for a configuration that will work (and is modern), and I know there are folks around here who are way more competent than me. I've built computers and am comfortable assembling one and messing with *nix; I can follow guides; I just want to end the decision process for the hardware and software configuration. What I've researched so far (not that these are very modern components): Case: I think I've settled on the Antec Twelve Hundred case because it cools well, is quiet, and simply has 12 bays that allow elastic mounting. The SilverStone Raven is its counter-candidate, but I find its construction quite odd. For the PSU, I'm torn between Antec CP-850 and Nexus RX-8500, but I did this research more than a year ago. The Nexus has a very uniform power profile, and I'd rather not have the Antec spin up and down based on load. On the other hand, I'm not sure how often my file server will draw more than 400W under use. For the hard drives, I've read that WD Black drives are actually WD RE3 with a software setting changed. I'd also like to buy different drive types, not just 4 WDs. Recommendations? Right now I have a 2TB Hitachi Deskstar 7K300. For the motherboard, CPU and RAM I have no idea, other than the RAM must be ECC. I already asked a question here about ECC RAM, but I was misguided and was looking for a motherboard that would support USB 3.0 as well. I've learned to go with eSATA, or worry about USB later. Then there's the (liquid) cooling, Wi-Fi card, and FreeBSD vs. OpenSolaris Express. Lastly, I'm wondering if I can make this PC into a media server by adding a Blu-ray drive and a good sound card. But support for Blu-Ray is spotty on Linux, and I don't know if Windows 7 on VirtualBox would get sufficient hardware access to output HDMI or SPDIFF signals. (Running OpenSolaris virtualized is not an option because of the reliability risk.) Then there are HDCP concerns. Suggestions on that would be appreciated as well, but I don't want us to get sidetracked. A specific shopping list on the core components would be great, so I can start ordering, and in the meantime educate myself with regards to the other issues. Finally, I think this could become a great FAQ for those technically inclined to build their own ZFS server, but confused by the dizzying array of options out there, and I promise to compile the results and share my experience building and benchmarking the server.

  Read the article

• USB software protection dongle for Java with an SDK which is cross-platform “for real”. Does it exist?

  - by Unai Vivi

  What I'd like to ask is if anybody knows about an hardware USB-dongle for software protection which offers a very complete out-of-the-box API support for cross-platform Java deployments. Its SDK should provide a jar (only one, not one different library per OS & bitness) ready to be added to one's project as a library. The jar should contain all the native stuff for the various OSes and bitnesses From the application's point of view, one should continue to write (api calls) once and run everywhere, without having to care where the end-user will run the software The provided jar should itself deal with loading the appropriate native library Does such a thing exist? With what I've tried so far, you have different APIs and compiled libraries for win32, linux32, win64, linux64, etc (or you even have to compile stuff yourself on the target machine), but hey, we're doing Java here, we don't know (and don't care) where the program will run! And we can't expect the end-user to be a software engineer, tweak (and break!) its linux server, link libraries, mess with gcc, litter the filesystem, etc... In general, Java support (in a transparent cross-platform fashion) is quite bad with the dongle SDKs I've evaluated so far (e.g. KeyLok and SecuTech's UniKey). I even purchased (no free evaluation kit available) SecureMetric SDKs&dongles (they should've been "soooo" straighforward to integrate -- according to marketing material :\ ) and they were the worst ever: SecureDongle X has no 64bit support and SecureDongle SD is not cross-platform at all. So, has anyone out there been through this and found the ultimate Java security usb dongle for cross-platform deployments? Note: software is low-volume, high-value; application is off-line (intranet with no internet access), so no online-activation alternatives and the like. -- EDIT Tried out HASP dongles (used to be called "Aladdin"), and added them to the no-no list: here, too, there is no out-of-the-box (out-of-the-jar) support: e.g. end-linux-user has to manually put the .so library (the specific file for the appropriate bitness) in the right place on his filesystem, and export an env. variable accordingly. -- EDIT 2 I really don't understand all the negativity and all the downvoting: is this a taboo topic? Is it so hard to understand that a freelance developer has to put food on the table everyday to feed its family and pay the bills at the end of the month? Please don't talk about "adding value" as a supplier, because that'd be off-topic. Furthermore I'm not in direct contact with end-customers, but there's an intermediate reselling entity: it's this entity I want to prevent selling copies of the software without sharing the revenue. -- EDIT 3 I'd like to emphasize the fact that the question is looking for a technical answer, not one about opinions concerning business models, philosophical lucubrations on the concept of value, resellers' reliability, etc. I cannot change resellers, because this isn't a "general purpose" kind of sw, but a very vertical one and (for some reasons it's not worth explaining here) I must go through them. I just need to prevent the "we sold 2 copies, here's your share [bwahaha we sold 10]" scenario.

  Read the article

• Microsoft Ergonomic 7000 keyboard + mouse lag

  - by user115210

  I recently bought a new Microsoft Ergonomic 7000 keyboard. I started to use it with my Ubuntu 12.04 and it lags all the time. I try to be more specific: Even on a minor CPU usage the mouse lags. By minor I mean firefox loading a webpage, or opening an application like conky, gnome-terminal etc. When higher CPU usage occurs the keyboard is lagging too, but by this I mean it misses my hits, so what I type won't appear later. What I tried so far (and did not work)? Disable autosuspend (echo -1 to sys/bus/usb.../autosuspend) and at the same place set level to "on". I have tried several video drivers: Vesa, radeon, newest catalyst (and catalyst beta too) When my keyboard and/or mouse lags I tried an other USB keyboard which works perfectly and the same for the mouse. I tried the keyboard and mouse on a different computer with Linux (Ubuntu, Arch, OpenSuse) too, the same problem appears but not on Windows. I tried to replace the battery sets, and to change channel on the dongle. And also tried to use the dongle from other USB ports. On the same time I am able to use any other wireless mouse. I changed the XkbModel to "microsoft7000" but it did not solve anything. About the hardware: AMD A8 3870K - Radeon HD6550D 8 GB of memory 4 GB of swap (which is almost never used) Here are my PC's details: lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 045e:071d Microsoft Corp. Bus 005 Device 002: ID 0461:4ea7 Primax Electronics, Ltd lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6550D] 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -n 150: http://pastebin.com/sGUAAiUe cat /var/log/Xorg.0.log: http://pastebin.com/fny7ZkN4 Note: The Icon7 Twister Evolution is the replacement mouse to use.

  Read the article

• Why did Ubuntu suddenly get so slow?

  - by user101383

  12.10 has been slowing down mysteriously. Normally, in past versions, I can log in, open Firefox, and it will pop up within seconds. 12.10 is like that upon install too, though once I install my old apps, it gets very slow by Ubuntu standards. After login the hard drive will just make noise for a while before the OS will do anything. Hardware: enter description: Desktop Computer product: XPS 8300 () vendor: Dell Inc. serial: B6G2WR1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=desktop uuid=44454C4C-3600-1047-8032-C2C04F575231 core description: Motherboard product: 0Y2MRG vendor: Dell Inc. physical id: 0 version: A00 serial: ..CN7360419G04VQ. slot: To Be Filled By O.E.M. *cpu description: CPU product: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 256KiB capacity: 256KiB capabilities: internal write-through unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-through unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache size: 8MiB capacity: 8MiB capabilities: internal write-back unified *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 8GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 0 serial: 7228183 slot: DIMM3 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 1 serial: 1E28183 slot: DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 2 serial: 9E28183 slot: DIMM4 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NF-CG vendor: Nanya physical id: 3 serial: 5527183 slot: DIMM2 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A05 date: 09/21/2011 size: 64KiB capacity: 4032KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:fe600000-fe6fffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: Juniper [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:44 memory:d0000000-dfffffff memory:fe620000-fe63ffff ioport:e000(size=256) memory:fe600000-fe61ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Advanced Micro Devices [AMD] nee ATI physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:48 memory:fe640000-fe643fff *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:45 memory:fe708000-fe70800f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fe707000-fe7073ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:46 memory:fe700000-fe703fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 memory:fe500000-fe5fffff *-network description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=bcma-pci-bridge latency=0 resources: irq:16 memory:fe500000-fe503fff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 memory:fe400000-fe4fffff *-network description: Ethernet interface product: NetLink BCM57788 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 18:03:73:e1:a7:71 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:47 memory:fe400000-fe40ffff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fe706000-fe7063ff *-isa description: ISA bridge product: H67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:43 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fe705000-fe7057ff *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fe704000-fe7040ff ioport:f000(size=32) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: Hitachi HUA72201 vendor: Hitachi physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: JP4O serial: JPW9J0HD21BTZC size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000641dc *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 4e3d91b7-fd38-4f44-a9e9-ba3c39b926ec size: 585GiB capacity: 585GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-10-21 16:26:50 filesystem=ext4 lastmountpoint=/ modified=2012-10-29 18:12:08 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2012-10-29 18:12:08 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 7823MiB capacity: 7823MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 7823MiB capabilities: nofs *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 84a92aae-347b-7940-a2d1-f4745b885ef2 size: 337GiB capacity: 337GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-10-21 18:43:39 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVDRWBD DH-12E3S vendor: PLDS physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: MD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-scsi:2 physical id: 3 bus info: usb@2:1.8 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdb configuration: sectorsize=512 *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@6:0.0.1 logical name: /dev/sdc configuration: sectorsize=512 *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@6:0.0.2 logical name: /dev/sdd configuration: sectorsize=512 *-disk:3 description: SCSI Disk product: MS/MS-Pro vendor: Generic- physical id: 0.0.3 bus info: scsi@6:0.0.3 logical name: /dev/sde version: 1.03 serial: 3 capabilities: removable configuration: sectorsize=512 *-medium physical id: 0 logical name: /dev/sde

  Read the article

• I have 6 updates that won't install on Ubuntu 12.04?

  - by Taylor

  I'm an Ubuntu novice, so any help here is greatly appreciated! I'm running Ubuntu 12.04, and I have six updates that just won't install. I've tried Update Manger, sudo apt-get upgrade, and sudo apt-get update. Nothing has worked so far. Here are the details I get from Update Manager: installArchives() failed: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... No apport report written because MaxReports is reached already Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3685 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev:No apport report written because MaxReports is reached already fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic-pae linux-image-3.2.0-27-generic-pae linux-image-3.2.0-29-generic-pae udev xserver-xorg-core fglrx fglrx-amdcccle linux-image-generic-pae linux-generic-pae xserver-xorg-video-intel fglrx-dev Error in function: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3782 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured

  Read the article

• Why would GLCapabilities.setHardwareAccelerated(true/false) have no effect on performance?

  - by Luke

  I've got a JOGL application in which I am rendering 1 million textures (all the same texture) and 1 million lines between those textures. Basically it's a ball-and-stick graph. I am storing the vertices in a vertex array on the card and referencing them via index arrays, which are also stored on the card. Each pass through the draw loop I am basically doing this: gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_POINTS, <size>, GL.GL_UNSIGNED_INT, 0); gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_LINES, <size>, GL.GL_UNSIGNED_INT, 0); I noticed that the JOGL library is pegging one of my CPU cores. Every frame, the run method internal to the library is taking quite long. I'm not sure why this is happening since I have called setHardwareAccelerated(true) on the GLCapabilities used to create my canvas. What's more interesting is that I changed it to setHardwareAccelerated(false) and there was no impact on the performance at all. Is it possible that my code is not using hardware rendering even when it is set to true? Is there any way to check? EDIT: As suggested, I have tested breaking my calls up into smaller chunks. I have tried using glDrawRangeElements and respecting the limits that it requests. All of these simply resulted in the same pegged CPU usage and worse framerates. I have also narrowed the problem down to a simpler example where I just render 4 million textures (no lines). The draw loop then just doing this: gl.glEnableClientState(GL.GL_VERTEX_ARRAY); gl.glEnableClientState(GL.GL_INDEX_ARRAY); gl.glClear(GL.GL_COLOR_BUFFER_BIT | GL.GL_DEPTH_BUFFER_BIT); gl.glMatrixMode(GL.GL_MODELVIEW); gl.glLoadIdentity(); <... Camera and transform related code ...> gl.glEnableVertexAttribArray(0); gl.glEnable(GL.GL_TEXTURE_2D); gl.glAlphaFunc(GL.GL_GREATER, ALPHA_TEST_LIMIT); gl.glEnable(GL.GL_ALPHA_TEST); <... Bind texture ...> gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glDrawElements(GL.GL_POINTS, <size>, GL.GL_UNSIGNED_INT, 0); gl.glDisable(GL.GL_TEXTURE_2D); gl.glDisable(GL.GL_ALPHA_TEST); gl.glDisableVertexAttribArray(0); gl.glFlush(); Where the first buffer contains 12 million floats (the x,y,z coords of the 4 million textures) and the second (element) buffer contains 4 million integers. In this simple example it is simply the integers 0 through 3999999. I really want to know what is being done in software that is pegging my CPU, and how I can make it stop (if I can). My buffers are generated by the following code: gl.glBindBuffer(GL.GL_ARRAY_BUFFER, <buffer id>); gl.glBufferData(GL.GL_ARRAY_BUFFER, <size> * BufferUtil.SIZEOF_FLOAT, <buffer>, GL.GL_STATIC_DRAW); gl.glVertexAttribPointer(0, 3, GL.GL_FLOAT, false, 0, 0); and: gl.glBindBuffer(GL.GL_ELEMENT_ARRAY_BUFFER, <buffer id>); gl.glBufferData(GL.GL_ELEMENT_ARRAY_BUFFER, <size> * BufferUtil.SIZEOF_INT, <buffer>, GL.GL_STATIC_DRAW); ADDITIONAL INFO: Here is my initialization code: gl.setSwapInterval(1); //Also tried 0 gl.glShadeModel(GL.GL_SMOOTH); gl.glClearDepth(1.0f); gl.glEnable(GL.GL_DEPTH_TEST); gl.glDepthFunc(GL.GL_LESS); gl.glHint(GL.GL_PERSPECTIVE_CORRECTION_HINT, GL.GL_FASTEST); gl.glPointParameterfv(GL.GL_POINT_DISTANCE_ATTENUATION, POINT_DISTANCE_ATTENUATION, 0); gl.glPointParameterfv(GL.GL_POINT_SIZE_MIN, MIN_POINT_SIZE, 0); gl.glPointParameterfv(GL.GL_POINT_SIZE_MAX, MAX_POINT_SIZE, 0); gl.glPointSize(POINT_SIZE); gl.glTexEnvf(GL.GL_POINT_SPRITE, GL.GL_COORD_REPLACE, GL.GL_TRUE); gl.glEnable(GL.GL_POINT_SPRITE); gl.glClearColor(clearColor.getX(), clearColor.getY(), clearColor.getZ(), 0.0f); Also, I'm not sure if this helps or not, but when I drag the entire graph off the screen, the FPS shoots back up and the CPU usage falls to 0%. This seems obvious and intuitive to me, but I thought that might give a hint to someone else.

  Read the article

• Upgrade using downloaded $40 to Win8 x64 to blank SSD using only retail 32Bit XP install CD

  - by Ron

  Here is my situation. Purchase the downloadable $40 UPGRADE version of Windows 8. Install this upgrade to a new/blank SSD drive WITHOUT prior installation of retail version of XP/service pack 3 (prefered). I have the retail purchased 32Bit XP installation media and I also have a slipstreamed disc that contains service pack 2. This 32bit XP license was installed to a desktop PC that I have NOT used for years (its broke). Questions: Can I upgrade using the $40 download upgrade version from retail 32Bit XP to 64Bit Windows 8 directly to new SSD? without first installing 32bit XP to new SSD? If 32bit XP needs to be installed to perform the upgrade to 64bit Win 8 is service XP service pack 3 still available; likewise, if the boxed retail version of XP 32bit is required to be pre-installed to the new SSD before attempting the downoladed $40 upgrade to 64Bit Win, can a clean install be performed or is a undesired actual upgrade performed? From what I have read this is way to complicated. Ideally, I should be able to install $40 upgrade version Win 64bit directly to new/blank SSD, then during the license verification process enter both the Win8 64Bit upgrade key and retail XP 32bit key (over internet or phone call). Thanks Very Much In Advance for any insight!! Regards, Ron

  Read the article

• Stuck part-way through installation of windows 7, upgrade product key, cannot cancel or finish installation

  - by user326520

  I'm trying to install Windows 7 (to get rid of Windows 8). I started the installation, cleared the minefield Microsoft has put in to stop me uninstalling 8, but forgot that my Windows 7 disk is an upgrade. So now I'm part-way through the 7 install. Can't go back, can't convince Microsoft that I have a valid key; I tried stopping the Windows 7 install and booting XP first, but I can't either - the unfinished Windows 7 install prevents that. Where's the way out? Update: Having spent some time with a Microsoft operative, I know why I can't install XP; this recent computer doesn't support IDE SATA mode, only AHCI. So the problem is: - straight install - key not valid - XP first before upgrade - XP cannot install due to newer HDD interface.

  Read the article

• BIOS upgrade lowers CPU temperature

  - by N.N.

  Setup I've got a system with an Asus P8Z68-V PRO motherboard and an Intel Core i7-2600K CPU running at stock speed (no overlocking) which I cool with a Noctua NH-U12P. On the heatsink I've got the two included fans connected via the included Low-Noise Adapters (L.N.A.) 1100 RPM, 16.9 dB(A). In the BIOS settings I've set the CPU and chassis fan profile to silent. Issue Yesterday I upgraded from BIOS version 0501 to 0606. After the upgrade I checked the temperatures in the BIOS monitor and was surprised to see that the CPU temperature was slightly ~30°C. Before the upgrade the CPU temperature was ~50°C with the same BIOS settings (see the following heading for details on temperatures). How can this be? It seems a bit odd that a BIOS upgrade can lower the CPU temperature by 20°C and it also seems odd that the CPU temperature is lower than the chassis temperature. Temperatures When I've checked temperatures the room temperature has been ~23°C. I haven't changed the placement of the computer nor the hardware or cooling setup between BIOS versions. BIOS version 0501 BIOS monitor: CPU: ~50°C Chassis: ~33°C I haven't got any temperature measures from lm-sensors or the like for version 0501 because I only discovered the issue after upgrading to version 0606 and the BIOS updater utility won't let me downgrade to version 0501 (it says "outdated image" when I try to load version 0501). BIOS version 0606 BIOS monitor: CPU: ~30°C Chassis: ~33°C lm-sensors in Ubuntu 11.04 Desktop 64-bit (sudo sensors after an uptime of 4 h 52 min and a load average of 0.22, 0.18, 0.15): coretemp-isa-0000 Adapter: ISA adapter Core 0: +32.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +29.0°C (high = +80.0°C, crit = +98.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +36.0°C (high = +80.0°C, crit = +98.0°C) The BIOS monitor temperatures was checked directly after the lm-sensors temperatures was checked. BIOS version 0706, 0801, 1101 and 3203 I get the same kind of temperatures both in the BIOS monitor and with lm-sensors in BIOS version 0706, 0801, 1101 and 3203 as in 0606. Information from Asus The 0606 changelog mentions nothing explicitly about CPU temperature (but item 3., as indicated by sidran32, might affect temperatures): P8Z68-V PRO 0606 BIOS with IRST 10.6.0.1002 Enable the support of Intel Rapid Storage Technology version 10.6.0.1002 Release Improve DRAM compatibility Improve System stability Improve compatibility with some Raid card model Increase IGD share memory size to 512MB However the following FAQ might give a hint: FAQs I find that the CPU temperature reading in BIOS is about 10~20 degrees centigrade hotter than the reading in OS. Is it normal? Page Tools Solution That is normal as BIOS does not send idle command to the CPU, making most of the power saving features useless. You should be getting similar reading if you disable EIST/C1E/CPU C3 Report/CPU C6 Report in BIOS.

  Read the article

• upgrade glibc on RHEL4 without breaking anything

  - by SpliFF

  I have a static version of wkhtmltopdf which requires glibc-2.4 wkhtmltopdf: /lib/tls/libc.so.6: version `GLIBC_2.4' not found (required by wkhtmltopdf) I have apt installed with the DAG repos. Other than that the server is pretty stock standard except for Coldfusion MX7. My question is, is it safe to just "apt update glibc"? Will the updated glibc clobber the old one or will they co-exist? Should I "apt upgrade" the whole server? I'm pretty sure everything else (Apache2, Postgres8, etc) will handle the upgrade but Coldfusion concerns me due to its proprietry nature.

  Read the article

• SQL Server 2008 Hardware Recommendation;

  - by Jay

  Hi,I work for a large fortune 500 company. We have several SQL 2005 Servers running on DELL Poweredge 2950 with 8 GB RAM and 4 CPU's. Storage is DMX RAID 10. We are in the process of migrating to sql 2008. We are planning on consolidating multiple sql 2005 into single SQL 2008 Server.If anyone can suggest hardware I would appreciate. We have looked at DELL R710, I was wondering if there are other servers that are good for running SQL 2008. Thanks

  Read the article

• Other user SSHed from my hardware

  - by Alex

  While logged into our HPC cluster I used w to check out who else was logged in. I happened to notice that it looks like there's another user logged in from my (personal) computer; 19:04:47 up 40 days, 6:39, 44 users, load average: 0.10, 0.14, 0.18 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT ME pts/4 zerg.neuron12. 18:55 0.00s 0.09s 0.04s w SOMEONE_ELSE pts/35 zerg.neuron12. Sat14 2:27m 0.08s 0.08s -bash Is this something I should be worried out - I tried to kill the other session but had a permission denied message. Is it possible we just both have the same hardware name? I'd have thought that if this were the case the server would give one of us a different name (e.g. zerg1) when we logged in to prevent confusion. This is not an area I have any experience with, so any advice would be greatly appreciated!

  Read the article

• How to upgrade Mac OS X from 10.4 to 10.6

  - by siva

  How do I upgrade from Mac OS X 10.4 to 10.6? I'm using an iBook G4.

  Read the article

• Automate Windows 8.1 Enterprise upgrade

  - by Ben M.

  I have been trying to find the necessary command line switches for automating the upgrade for my Windows 8 clients to Windows 8.1. I have the ISO extracted and I've run setup.exe /? but that doesn't tell me enough. I can't find any relevant information from search engines. Can anyone point me to some documentation or information on how to automate the upgrade so that it keeps user data, programs, etc? I know how to do it when running the installer manually, but I obviously do not wish to do that with 100+ machines.

  Read the article

• GRUB Problem or Hardware Problem?

  - by Nikit Batale

  I have Windows XP Professional and Ubuntu Karmic Koala 9.10 on dual boot. I often get a GRUB loading failed error during boot-up. Or sometimes, when I try to boot into either Ubuntu or XP, I get a Could not read from source error. Now this is funny. After getting one of the above errors, if I simply unplug the SATA cable from Hard Drive end and plug it again, the problem gets solved. So what and whose problem is it? GRUB or My Hardware ? P.S.: I was suggested on StackOverflow that ServerFault is the right place for this question.

  Read the article

• Database Server Hardware components (order of importance), CPU speed VS CPU cache vs RAM vs DISK

  - by nulltorpedo

  I am new to database world and would like to know what are crucial hardware specs when it comes to database performance. I have searched the internet and found this so far (In order of decreasing importance): 1) Hard Disk: Get an SSD basically (much more IOPS than spinners) 2) Memory: Get as much as you can afford 3) CPU: For the same $ spent, prefer larger cache size over speed. Are these findings sensible? EDIT: I would like to focus on CPU speed VS CPU cache size. EDIT2: The database is used to store some combination of ints and int arrays with few text fields. There are a lot of Select queries looking for existing entries. If entry is not found, then insert it. I would say most of processing would be trying to find a match across a table with 200 columns and 20k rows. The insert statements are very few. EDIT3: Also, we have a lot of views (basically select queries).

  Read the article

• Text Terminal Hardware (for Linux)

  - by DLH

  Is there any way to obtain a hardware text terminal (preferably small in size) with a screen and a keypad to connect to a Linux machine (preferably via usb)? I'd like to be able to log into a command line and do some work there while simultaneously running a graphical environment on the main display. It seems like there should be some kind of lcd screen and qwerty keypad device designed for this purpose. Does this exist, and how do I get one? Edit: I'd be happy with a small networked device as well, as long as I could get a remote terminal into my computer.

  Read the article

• apticron, apt-get dist-upgrade and aptitude

  - by Kai

  I'm confused, on my debian server I've gotten the daily "updates available" message by apticron. I normally then just use aptitude to install the upgrades. Today I got a message which shows two upgrades. But they don't show up in aptitude. When I do a apt-get dist-upgrade they show up as "NEW" packages to be installed. aptitude dist-upgrade seems to ignore them. Can anyone explain to me why this is happening and how to get rid of the messages (It doesn't seem like I really need the new packages)

  Read the article

• Autonegotiate errors between HP and Cisco hardware?

  - by Satanicpuppy

  This is a bit of a specific extension to this question. I've got two ASA's that feed into a Procurve switch, and then into an IPS. All is well except that the procurve absolutely refuses to autonegotiate with the ASA's...The asa's run 100full, and the procurve autonegotiates to 100half. It does it for both ASA's, so it's probably not a failure on one of them, and everything works fine if I force the procurve to 100full. Has anyone else seen this issue? I've been buying more HP hardware, but I'm not keen on getting equipment that's not going to play nice with my Cisco backbone.

  Read the article

• Can't change Hyper Terminal Hardware Settings

  - by Tim

  Anyone here any good with Hyperterminal? Am having a nightmare trying to use it at work to update our telephone extensions. The company who supply our PABX box have told me that XP does strange things to Hyperterminal and that I should use Win2k. Which I did with the same result. I have narrowed the problem dowwn to the Hardware Settings for the connection in Hyper Terminal. No matter what I set (and I need 7E1) it defaults back to 8N1. Has anyone seen this behaviour before and know of a simple way around it? (Apart from buying a more expensive commercial version of Hyper Terminal, as suggested by our support people). Edit: I should point out I have to connect via a phone line so a direct serial connection is not an option. Cheers Tim

  Read the article

• Clonezilla , NLite and PCs with different hardware specs..

  - by r2b2

  Hi, I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

  Read the article

• Alsa hardware volume with PulseAudio

  - by Jan Hudec

  Before installing pulseaudio, I was able to control volume for the front (meaning on the front panel, the "headphone" jack) and rear (meaning on the back panel, the "line out" jack) separately. When I installed pulseaudio, it became possible to control volume for each playing process separately, but the individual controls for outputs disappeared. While the default device in alsa now routes via pulseaudio, the sysdefault device provides access to the hardware. But kmix does not seem to let me show them now. Is there any way to beat kmix into showing the sysdefault device too? Or something else X-based that would not fight with kmix too much? The system is Debian Jessie (testing) amd64, updated, KDE version 4:4.13.3-1.

  Read the article

• upgrade sp2 to sp3 in window xp

  - by Niraj Choubey

  How to upgrade window sp2 xp to window sp3 xp?

  Read the article

• Configure Ubuntu9.10 to see hardware of my laptop

  - by michael

  I have installed Ubuntu 9.10 on my laptop. But it can't see all the hardware of the laptop. I would like some help. my laptop has 8G (in Windows7), but Ubuntu only see 2.9G (I get this value from System Monitor under Resource tab my laptop can have 1600x900 resolution (it works in Windows7), but i can only set to 1280x800 in Ubunutu my wireless card does not work. But my wired connection works. Can you please help me in configuring my Ubuntu environment?

  Read the article

• Windows Server 2008 R2 Upgrade via Remote Desktop

  - by Marko

  Is it possible to do an in-place upgrade of Windows Server 2008 R2 to Windows Server 2012 using only Remote Desktop? My plan is to extract WS 2012 installation iso file to C:\WS2012 and run the setup. After restart Remote Desktop connection will be lost, but will it be restored later? Is setup going to automatically install everything, restart, run WS 2012 and start listening for RDP connections? Server is rented and I would like to save the KVM fee. I read here that it's possible to upgrade WS 2008 to WS 2008 R2 like that. Thanks!

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >