Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 59/315 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• ssh login information

  - by bob

  As the admin of my machine, I want users to be able to log into my computer with ssh, but I'm looking for a graphical way to be notified that a user is connected at the moment. If multiple users are connected, I want a list of connected users, their location, name, etc. This could be in the form of a forceCommand and 'alert' command when someone logs in, plus a icon saying how many people are connected right now in the notification bar, with the option to click on it to have more information about these users. Is there such a tool available in ubuntu, and if not, how to do it (I'm guessing it's not that difficult and could be done with under ten bash command lines) ?

  Read the article

• Wireless network disabled

  - by neil delmonte

  After installing Ubuntu 11.04, my network has become disabled. Here is the output oflshw in terminal: *-network DISABLED description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: 00:21:00:58:65:5f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:d4600000-d4603fff

  Read the article

• Using two ethernet connections (Internet enabled) simultaneously

  - by vedarthk

  I have searched and read over the Internet and also on askubuntu. i am using Ubuntu 11.04 and my question or the thing that I want to achieve is efficient use of both the connections and thus increasing my browsing and downloading speed. I want my system to decide which packet should be routed over which interface. I want to know if this is possible. For example, Is it possible to route alternate packets over the two interfaces ? Please let me know any Internet resource or If I would have to insert any code into the network drivers etc. ?

  Read the article

• How can an application (like Firefox) be forced to use a certain network interface?

  - by Lekensteyn

  I've two interfaces: eth0 and wlan0 on a notebook. Possible use cases: eth0 grants me Internet access, and wlan0 is currently connected to a router which does not have Internet-connectivity. For development purposes, I need to connect to the wlan0 by default, but use eth0 for surfing eth0 and wlan0 are both connected to the Internet. For a torrent application, eth0 should be used for speed, but for portability of the notebook, SSH should have a connection over wlan0 eth0 is a wire connection, wlan0 is a wireless one. Sensible data should be transferred over eth0, but other traffic can go over wlan0 as well. Is there a way to force applications (like nc.traditional or firefox) to use a certain network interface? A wrapper like example-wrapper eth0 program is fine too if such program exist. It would be nice if it could configured within Firefox (in runtime). I'd like to avoid IPTables solutions if possible.

  Read the article

• How do I create a wireless ad-hoc network?

  - by Vinaychalluru

  Hello., Whenever i need to copy some files and couldnt find a pen drive, [ i dont have bluetooth enabled in my lap], I create a new ad hoc (wireless) network in windows and share the necessary files on the network and share files with the other system. Now, i want to do the same with Ubuntu. But, i couldn't. I could create a new network, but i am not able to chare or send or even dont know how to access the system connected to the network. So, how can i do this? Thanks

  Read the article

• lshw not showing network

  - by triunenature

  Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

  Read the article

• how to congest a link using iperf

  - by navaz

  I have setup like below. Switch1-------------------- Switch2 | | | | | | | | | | | | PC1 PC2 PC3 PC4 I have a video traffic is flowing between PC1 and PC4. I have configured PC2 as iperf server. ( iperf -s ) and PC3 as client . (iperf -c 10.10.10.2 -P 20 -t 10000) where 10.10.10.2 is PC2 IP. now I am seeing most of the traffic in a link (switch1---switch2) is iperf. (TCP). I have observed from the logs that 1 out of 300 packet is UDP. Still I am not seeing any difference in the quality of video streaming in PC4. It looks similar compared to the case with no iperf. I am checking QOS, I have tried many options with iperf, couldnt succeed. I want to diminish the quality of video streaming in PC4. Could you please tell me what options can be used along with iperf to do it. Bandwidth between Switch1---switch2 is 1Gbits/sec. Thanks in advance

  Read the article

• eth0 not working on startup

  - by user4106

  Hi to all, This might sound strange but, working with my Lubuntu 10.04 i've experienced troubles when connecting to my eth0 newtwork. After some googling, i've found out that by writting in the CLI the following command: mii-tool eth0 -F 10baseT-FD and activating the eth0 in the toolbar (by clicking "activate eth0") everything works just fine. Well, up to now, i did not have any problem, because every time i turned on the computer i had to do this, but it was very little effort.But now, i would like to use the machine as a file server, accesing it by ssh, without monitor or keyboard. So, i won't be able to make this actions, and can't do this at startup because mii-tool needs root permissions. So, the question is: Do you know what does that command do, and how can id make that change permanent? Or do you know any other solution for my problem? I hope i was clear! If not, tell me and i'll try to be as clearer as possible. Thanks in advance!

  Read the article

• problems establishing ssh connection

  - by Superbyte

  since two days I am facing a really weird problem. I have receantly installed ubuntu server 14.04 LTS on a workstation. It has a fix IP address, which I can successfully ping from other computers in the network. But when I try to establish a ssh connection from a windows computer via putty I get some strange errors, which I cannot fix. The Problem is that putty takes a really long time trying to establish a connection. After about 10 seconds I get the following error: Network error: Software caused connection abort But when I click the Restart Session option a several times after putty shows the error message, I can login in. But now comes the other problem. When the login appears on the putty console I type in the user, but it really takes a long time until I can type in the password to login. This is what I already tried: sshd: ALL in etc/hosts.allow commented line session optional pam_motd.so in etc/pam.d/login and etc/pam.d/sshd configured the firewall with: sudo iptables -A INPUT -p tcp --dport ssh -j ACCEPT checked if ssh server is listening on port 22 UseDNS no in etc/ssh/sshd_config I hope someone can help me, because this problem is really annoying. Thanks in regard

  Read the article

• A tinkered PC resets its nameserver (resolv.conf) on each boot

  - by aitchnyu

  The Ubuntu 11.10 PC resets resolv.conf on each boot, only with a comment remaining. How do I fix this by setting the persistent storage? It was tinkered by somebody else and I (and him!) cant trace his actions. The graphical connection manager also refuses to work thanks to the tinkering. Content of interfaces file: root@technovia-3:~/dev/spectrum/spectrum# cat /etc/network/interfaces auto lo iface lo inet loopback

  Read the article

• Techniques to prevent non-official clients in network gaming?

  - by UpTheCreek

  In multi-player network games, what techniques exist to try to ensure that users are connecting with the official client application, and not some hacked client app? I realise there is probably no sure-fire way to do this, but rather I'm interested in techniques that can be employed to mitigate the problem. I'm especially interested in any techniques that can be used for web based games, but I imagine most can be applied generally. Thank you!

  Read the article

• How to run just one application over ethernet while others on wifi

  - by db42

  I normally connect my laptop via wifi. However, I would like to use synergy to share my workplace desktop machine with my laptop. But the problem is that my desktop machine doesn't have wireless support. So, I have no other options except using ethernet to connect them. My first question is - Is it possible to use ethernet for synergy and keep using wifi for all other application. If the answer is yes, can somebody please guide me how to achieve this. Thanks,

  Read the article

• why does our network printer not show up on some of our macs, but does show up on others? [on hold]

  - by peter

  We lost power in our building and now cannot get our HP laser jet 5200 to be recognized by half of our computers. We are all Macs, some running OS 10.7.5 can see the printer, others running 10.7.5 cannot, and those running 10.8.5 and 10.9 cannot. We've re-booted the router, turned off and on printer and macs—no go. The printer displays an IP address (dynamically assigned) but we can't access it. Tried to see it using CUPS—same story, can see it on some systems, not on others. Any thoughts?

  Read the article

• How to make my proxy settings change depending on the network I connect to?

  - by Little Jawa

  My company's corporate network requires me to set a network proxy to access the net, but when I am anywhere else, I don't need it. The proxy settings in Ubuntu (System - Preferences - Proxy server) allowed me to create "locations" that I can manually select. Then I have a "default" location (with no proxy) and a "work" location (with my company's proxy in it). Is there a way to make Ubuntu automatically select the "work" location based on the connection I'm using? I thought I could use the IP subnet (very specific) to detect where I am, but I have no idea how to set it up... Edit: I really need to have the proxy settings set at the system level. All my network connections (IMAP, SMTP, chat, etc) need to go through the proxy. Not only the web browser.

  Read the article

• How to write the path to a Windows shared folders address in terminal?

  - by user206996

  I want to permanently mount a few Windows shared folders. I googled that topic and found a lot of good answers, but with all the solutions I have a little problem: I believe I can't properly give an address of shared folder. I can find it following way: "Network" - "Windows Network" - "WORKGROUP_name" - "Computer_name" - and there is some folder i would like to mount. How can I write the path to the folders in terminal? UPD i can access needed folder throw address in location bar smb://server/ro/, but i try mount it by editing /etc/fstab file (using guide https://wiki.ubuntu.com/MountWindowsSharesPermanently) i get error mount error: could not resolve address for server: Unknown error PS in /etc/fstab : //SERVER/RO /media/server cifs username=user,password=pwd, uid=1000,iocharset=utf8 0 0

  Read the article

• How to join a Windows Domain an Map NEtwork Drives on Ubuntu Partition

  - by AgainstClint

  I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

  Read the article

• WiFi, No ping, other works fine

  - by Linux Mom

  I installed Ubuntu 12.04 LTS for my mom, this runs OK. However recently, I switched back and forth between encryptions on our WiFi Router from WPA-PSK to WEP and back again to WPA-PSK, same password. Now this old laptop won't even ping the gateway on the router, although the nm-applet shows connected. I tried re-adding the network and putting in the BSSID. I did this over again sometimes just to verify. I tried with my 3G Tethering on my phone, it works fine, can go online too. My other Linux laptop can go on the same wifi as well as my phone. And this laptop used to been online on the same network, same password, same encryption (WPA-PSK) What can be wrong ? Does it need a serious kick in the butt or removing some cached authorisation somewhere?

  Read the article

• Connected to Access Point but no internet connection?

  - by ReaZem

  I am trying to use my school's WPA Enterprise network to access the internet with my Three-OS laptop. I currently have Windows7, Ubuntu11.10 and Backtrack5 installed. I can use my home's WPA2 network without any issues with the 3 OS. I can successfully connect to my school's network with the 3 OS but I can only browse the internet with windows7. Ubuntu network-manager and Backtrack WICD both say that I am connected to the Acces Point but I cannot browse the internet. I have tried uninstalling network-manager and installing WICD but it did not solve the problem. Every time I connect to the Access Point, I am able to browse the internet for about 10 seconds. I have tried disabling IPV6 I have tried changing DNS.

  Read the article

• Forti VPN Client not connecting to a server under Ubuntu 14.04

  - by deonis

  I've just updated to a new version of Ubuntu (14.04 86x64) and I got a very strange problem with Forti VPN Client. It seems running smoothly, but when I try to connect via GUI or terminal it hangs at the connection stage. here is what I see in terminal: STATUS::Setting up the tunnel STATUS::Connecting... #and this takes forever I know that it's not the problem with the server, the client works no problem on windows. Thank in advance ...

  Read the article

• Problem with connect to server using FTP(with login)

  - by Sourav Chattopadhyay

  I am unable connect to my remote account using Ubuntu's "Connect to Server" option after moving on to Ubuntu 12.04 LTS. In Ubuntu 10.10 I used to connect to my FTP server by going to Places-Connect to server-FTP (with login) After giving the userid and password the remote folder would mount immediately but now it is showing a busy icon at top until I close the window after some time. I have also tried to connect using Ctrl + L from a Nautilus window using sftp://user@server but result is the same. Even though I could connect to my FTP server using gFTP, the default one from Nautilus is a better option to me.

  Read the article

• How to connect Ethernet via a Huawei Smart AXMT880s modem (with auto-detection)?

  - by user12285

  It's been well over six months but I have the same router SmartAX MT880d with Ethernet, and the exact same problem : no internet, even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. I'm a total beginner with Ubuntu. My internet works great in Windows but does not work in Ubuntu. Sorry if I don't use the right (technical) terminology to explain my issue. English is not my mother tongue. For 2 weeks, I've been doing reading on the web and forums and the ubuntuguide.org to name a few, but to no avail. Now I see no other solution but to ask for help. My problem is that I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files. E.g.: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm concerned that I might put figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem? Is the subnet 255.255.255.0? Gateway 192.168.1.1? I'm confused as I can also see a different IP starting with 155131*** (is it an account number?) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

  Read the article

• MAC filtering after DHCP

  - by user1655161

  How to manage filtering by MAC in Ubuntu? Scenario: Ubuntu DHCP is configured and working (network 192.168.1.0) a) Laptop 1 is set in configuration on Ubuntu as static IP Laptop 1 is configured for automatic IP and when is connected to server everything works. I'm taking laptop 2 which is configured as static IP 192.168.1.10 and his configuration is not set in Ubuntu dhcpd.conf After laptop 2 is connected internet working. It is possible to do MAC filtering which disallow to connect PCs with address IP set as static but MAC address is not configured in Ubuntu (something like: intruder in network)?

  Read the article

• Why does Ubuntu really slow down the rest of my home network?

  - by tympaniplayer

  I have a ubuntu Dekstop and a Windows 7 Desktop. The windows 7 is connected via wireless adapter and the ubuntu dekstop is connected via ethernet. The wireless adapter is capable of 300Mbps link speed. When my ubuntu is connected to the interet, the network becomes very very slow. I have a 15 Mbps cable broadband connection. I have had many devices connected at one with no problem, yet this one connection seems to be wreaking havoc.

  Read the article

• Backup networks

  - by MegaBrutal

  My USB Wi-Fi adapter tends to overheat and when it happens, it stops working until I pull it out and plug it in again. Since I often access my machine remotely from other places, when it happens, my machine gets inaccessible for me until I get home to fix it. I'm thinking, I have another USB Wi-Fi adapter in spare. Would it be possible to plug it in that too but tell Ubuntu to only use it when the primary Wi-Fi adapter becomes off-line? (I won't use the other Wi-Fi adapter as primary because it provides significantly less quality.)

  Read the article

• Connect to wifi ubuntu 14.04 (new ubuntu user)

  - by user289168

  I have recently changed my operating system from windows 8 to ubuntu 14.04, when trying to connect to the network via wifi the system just keeps asking for my password over and over without connecting. The connectivity through an Ethernet cable is perfectly fine however and my wifi worked fine through windows 8, I have very little ubuntu knowledge so i apologise if the right information is not shown in this question. Just wondering if there was any known problems or if anyone has seen this before? Thanks in advance for any help, Tom

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >