Search Results

Search found 20388 results on 816 pages for 'nvidia current'.

Page 590/816 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597 | Next Page >

Can I have a single solid state drive and a RAID array on the same machine?

- by jaminto

Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

Read the article
Debian 5.0 (lenny) apt sources fail?

- by Tronic

For the past few days, I couldn't update our apt-sources on Debian 5.0 (lenny). I get the following errors. W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/main/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/contrib/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/non-free/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/main/source/Sources 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/contrib/source/Sources 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/non-free/source/Sources 404 Not Found [IP: 130.89.148.12 80] How do I fix this problem? Edit: My current sources are: # Debian Lenny deb http://ftp.de.debian.org/debian/ lenny main non-free contrib deb-src http://ftp.de.debian.org/debian/ lenny main non-free contrib # Debian Lenny Non-US deb http://non-us.debian.org/debian-non-US lenny/non-US main contrib non-free deb-src http://non-us.debian.org/debian-non-US lenny/non-US main contrib non-free # Debian Lenny Security deb http://security.debian.org/ lenny/updates main contrib non-free

Read the article
update all the servers through one virtual servers using Storage are network virtual machine

- by Mr.Calm

Using UBUNTU and Virtal Box by Oracle, and Using this script to start nginx in Virtual Box, and placing it in Virtual box inside~/init.d #!/bin/bash ### BEGIN INIT INFO # Provides: Testinit # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO # RETVAL=0; start() { CurrentTime=$(date +%d/%m/%Y"-"%I:%M:%S) ./usr/local/nginx/sbin/nginx echo "Current Time:"$CurrentTime>>/home/server/Desktop/NginxLogs.txt echo "!Starting nginx!" >>/home/server/Desktop/NginxLogs.txt Like this i want to write auto script (setup.sh file) and place that script in all virtual boxes inside my system, for example 8 virtual boxes and in all Virtual boxes NGINX is installed. Now, The thing is i am facing problem when i want change something in setup.sh i have to go to each and every virtual box, or Communicate each Virtual machine through SSH from my main machine. i am thinking to write another script (ex: Update.sh),and inside that script we give one path of file which is saved and recently edited in main machine (ex: DummySetup.sh). as soon as i run that script all the setup.sh files which are saved in each virtual machines should update the change or replace contents with DummySetup.sh's contents. Hope this is possible thing. Help would be appreciated.Thanking you

Read the article
Cannot set up dual monitors correctly in Fedora15 with KDE.

- by adivasile

I have 2 monitors: 24" LCD connected via DVI(primary) 19" LCD connected via VGA(secondary) Everytime Fedora starts the second display is always set to clone the first one and they both run at 1280x1024 and I always have to disable the 19" monitor, in order for the bigger one to run at 1920x1080. I want to set them up so that my secondary monitor extends the primary one.The problem is that no matter what kind of configuration I choose it has no effect.My secondary monitor remains disabled. I've tried using both the Display manager from KDE and the ATI Control Panel and the behaviour is always the same.The moment I click apply, the screen flickers and nothing changes. I've succesfully used the extended setup in Fedora15 with Gnome3. I have a RadeonHD 4300 series videocard and I'm using the drivers downloaded from the AMD site. This is the output of xrandr -q : Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 1920 x 1920 VGA-0 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.0 70.1 66.0 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 75.0 72.8 66.7 59.9 720x400 70.1 DVI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 60.0 1680x1050 59.9 1600x900 60.0 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1280x720 60.0 1152x720 60.0 1024x768 75.0 60.0 832x624 74.6 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 Later edit: The problem seems to come from the ATI drivers.I managed to set up the monitors like I wanted after I uninstalled the drivers. Unfortunately I'm working on an OpenCL project so I had to reinstall them.The moment I did that, all my previous settings were forgotten and I was back to square one.

Read the article
Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

- by Steve

I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

Read the article
DisableCrossAccountCopy not working on some Outlook installs, working on others, both going against Exchange

- by MikeBaz

As part of a mail migration project from one Exchange organization to another, we need to be able to prevent users from moving/copying messages between their accounts in each organization. (Yes, users will think this is evil; no, it's not my decision; yes, users will hate us.) Luckily, we thought, Outlook 2010 provides the DisableCrossAccountCopy registry value/policy (cf. http://technet.microsoft.com/en-us/library/ff800883.aspx). (Because you can't do multiple Exchange organizations in a single profile before Outlook 2010, this only matters on Outlook 2010. Yes, I'm ignoring for the sake of this question copy/move to/from the filesystem.) In our test lab, in a test forest with a test Exchange organization, with a second Exchange account added to the profile in either of the "real" Exchange organizations, with the value set to "*", everything works as expected. On a workstation in one of the production domains, however, the setting does not seem to work. We have tried it under HKCU, HKLM, HKCU\Software\Policies, and HKLM\Software\Policies. It simply seems to be ignored. The value was set in the OCT on a test machine, but the OCT (and the ADM/ADMX file) have the wrong type for the value. We have located the value in the registry and removed it everywhere it is found, we think, and put it back in HKCU, but it still isn't taking. At the moment, a clean Outlook install is not an option - even if it was, we at this point would need to know what to do to fix the pushed copy (I didn't push the copy out to thousands of machines, I've just been asked to help clean up the current mess). Thoughts?

Read the article
Bash mine script, please

- by HomelyPoet

The script, in and of its self, is fairly self-explanatory. Use if You so desire; any and all criticism wouldst be appreciated, as wouldst any suggestions for improvement. First iteration was writ upon OS X 10.5.8 Leopard, current iteration was run upon OS X 10.6.4 Snow Leopard with Safari 5.0.2 (6533.18.5). Also, any illumination as to why the first line ' if [ -f ] ' works, but ' if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] ' generates an error? [yes, I am a bit of a Noob] Code: #! /bin/bash # SafariClear0.0.6 if [ -f ] then cat /dev/null > ~/Library/Safari/LocalStorage/*.localstorage rm -f ~/Library/Safari/LocalStorage/*.localstorage fi if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] then echo "Oy vey!" fi cd ~/Library/Safari/ cat /dev/null > WebpageIcons.db cat /dev/null > TopSites.plist cat /dev/null > LocationPermissions.plist cat /dev/null > LastSession.plist cat /dev/null > History.plist echo "Clear" exit

Read the article
Cannot connect on TFS 2012 server through SSL with invalid certificate

- by DaveWut

I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

Read the article
is it worth to use load balancer on web server/website

- by user427969

I have a website and a while ago, the web server of the company hosting my website was down for about a day. I consulted the company for a solution on how i can stop this from happening in future and they suggested to have a second machine and which will be connected to my current website/web server by a "load balancer" (at an additional huge cost!!!). The second machine will be replicate of the first one and so if i goes down, the other will always be running. ---- Explanation ----- My hosting company suggested that it will be a good idea to have a second machine running at the same time and both the machines will be connected by a load balancer which reduces the rist of a downtime. The second machine will be a mirror of the first and any changes to first must be replicated in the second. I don't mind spending money if it really saves my website from going down. I want to know is it worth having this "load balancer" for my purpose? My website is a 24/7 service. I cannot afford an outage of 24 hours/1 hour. I don't mind using this "load balancer" as far as it is really worth. I am not sure if its just a marketing trick of my hosting company or really a "best" solution Thanks for help. Regards

Read the article
HTPC/DVR computer won't go into standby

- by Robert

When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

Read the article
PHP extension causes symbol lookup error

- by Christian

Dear, I installed - or better tried to - the NMCryptGate Extension for PHP on my Debian 5.0.8 server. I did this by compiling the sources which came up with no error message. Calling phpinfo() I can see the extension as enabled. BUT, whenever I try calling a method from this extension I get an error logged to the apache error log: /usr/sbin/apache2: symbol lookup error: /usr/lib/php5/20060613+lfs/nmcryptgate.so: undefined symbol: nmlistalloc What is missing? I got two packages from the software company: the php module sources and some files which should - according to their path inside the tar - go to /usr/local/bin|doc|include|lib. I moved them there without any effect. Each of these two packages has its own config file almost looking the same: \# libnmcryptgate.la - a libtool library file \# Generated by ltmain.sh - GNU libtool 1.3.4 (1.385.2.196 1999/12/07 21:47:57) \# \# Please DO NOT delete this file \# It is necessary for linking the library \# The name that we can dlopen(3) dlname='' \# Names of this library library_names='libnmcryptgate.so.1 libnmcryptgate.so libnmcryptgate.so' \# The name of the static archive old_library='' \# Libraries that this one depends upon dependency_libs=' -L. -L/usr/ssl/lib -L/usr/local/ssl/lib -L/usr/local/lib -lssl -lcrypto' \# Version information for libnmcryptgate current=1 age=0 revision=29 \# Is this an already installed library installed=yes \# Directory that this library needs to be installed in libdir='/usr/local/lib' I tried several ways to get it right: moving files, symlinking, changing configurations - always followed by restarting apache - no success. I guess I just have to move the files to the correct location or change the libdir inside the config files but meanwhile I'm totally confused by the two packages: do I need both, which config rules what, do I have to use the libdir variable? And for what? ... Anybody out there hinting me to my source of failure? Thank you in advance, regards, Christian

Read the article
where can I find the user in this IIS error 'Login failed for user 'IIS APPOOL\Web2'

- by Jack

I encounter the following error: Cannot open database "testbase" requested by the login. The login failed. Login failed for user 'IIS APPPOOL\Web2'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot open database "testbase" requested by the login. The login failed. Login failed for user 'IIS APPPOOL\Web2'. So, where can I give this user Web2 permission? (By the way, the server do not have such user Web2 but there is a folder called Web2 located at the wwwroot folder.) I search for answers but all failed as follows: [1] Add the user IUSR to the folder and give it read permission. [2] http://www.codekicks.com/2008/11/cannot-open-database-northwind.html [3] http://blog.sqlauthority.com/2009/08/20/sql-server-fix-error-cannot-open-database-requested-by-the-login-the-login-failed-login-failed-for-user-nt-authoritynetwork-service/

Read the article
Is there a way to "burn" audio to an ISO? (as an audio CD)

- by Sootah

I have an audiobook that I've downloaded via their download manager, and it's loaded into their cutesy little audio program that they force you to use. I can play the book just fine using their proprietary software, and while it's annoying when using my PC, it's utterly UNBEARABLE when I try to listen to it on my Blackberry. The program is INSANELY slow, it literally takes around 30 seconds to switch between tracks, so if I've forgotten where I am in the book it takes me around 15 minutes to finally get to where I was at. I've looked everywhere on how to transcode the book to .MP3, but evidently with their current format it's either extremely convoluted (and I have no desire to dick around with installing some older version of the codec, getting a different transcoding app, and then wrestling with getting it to actually work). Since I'm able to burn a copy of the book to an audio CD, I figure the best way to go about this is to just make the CDs and then rip them off of those to .MP3. In order to avoid wasting two hours, not to mention 14 CD-R's, I was wondering if there's a way to "burn" to an .ISO instead of an actual CD-R. I currently have SlySoft's Virtual CloneDrive installed, so I can mount .ISO's easily enough, but now I want to actually create an ISO via the CD burning process. Just in case I've not explained myself very well, here is an overview of what I intend to do: "Burn" a set of Audio CD .ISOs from the audiobook (hopefully I can do this using Windows Media Player, otherwise I'll be forced to use the audiobook app) Mount an .ISO in Virtual CloneDrive Rip the audio tracks on the mounted .ISO to .MP3s Repeat steps 2-3 until the entire book is in .MP3 format Copy .MP3s to my Blackberry so that I'm not driven insane every time I want to listen to the book in the car, and be able to use Winamp when listening on my computer EDIT: I'd suppose a rather concise way to put it is that I need something that will emulate a CD-R drive, so that you can select it as the output drive in whatever app your burning the audio CD from. (I'd suppose that when you "insert a blank CD-R" the app would then ask you what file to save to)

Read the article
Trying to use Nginx try_files to emulate Apache MultiViews

- by Samuel Bierwagen

I want a request to http://example.com/foobar to return http://example.com/foobar.jpg. (Or .gif, .html, .whatever) This is trivial to do with Apache MultiViews, and it seems like it would be equally easy in Nginx. This question seems to imply that it'd be easy as try_files $uri $uri/ index.php; in the location block, but that doesn't work. try_files $uri $uri/ =404; doesn't work, nor does try_files $uri =404; or try_files $uri.* =404; Moving it between my location / { block and the regexp which matches images has no effect. Crucially, try_files $uri.jpg =404; does work, but only for .jpg files, and it throws a configuration error if I use more than one try_files rule in a location block! The current server { block: server { listen 80; server_name example.org www.example.org; access_log /var/log/nginx/vhosts.access.log; root /srv/www/vhosts/example; location / { root /srv/www/vhosts/example; } location ~* \.(?:ico|css|js|gif|jpe?g|es|png)$ { expires max; add_header Cache-Control public; try_files $uri =404; } } Nginx version is 1.1.14.

Read the article
How to wire 20 computers and 20 phones and 1 server into LAN?

- by John Smith

I have currently 3 switches Two Netgear JFS524 with 24 slots, One Belkin with 16 slots. Server DSL Internet Router. Main question is how to connect switches together, two Netgear's are next to each other, yet one is about 100 feet away and holds about 5 computer and 5 phones. If i connect them with only 1 wire will that limit bandwidth? e.g. all 23 computers will be limited to speed of one CAT5e cable? If i connect switches with 2 cables will this give speed boost? What's the ideal scenario should i just move the third switch next to other two? Will the speed of computer connected to white switch be same as computer connected to top switch? Will moving white switch right next top switch and having 16 wires comming 100 feet instead of 1 wire comming 100 feet make it faster? EDIT 1: I actually have NETGEAR ProSafe GS105 Gigabit switch its only has 4 ports in it though, you think i can have use of it in current setup? Like connect all 3 switches and server into it and keep internet router and phone server on one of the slower switches EDIT 2: Everyone mention gigabit switches, but will they do any difference with 10/100 network cards? I then have to use gigabit cards in every computer too? I could in server perhaps, but users will be 10/100

Read the article
A separate user for each task?

- by Mark Tomlin

I just got a VPS sver the other day, I'm new to server administration, but not that new to Ubuntu (11.04). I use it in my living room as the HTPC, and I had a previous VPS that I used on and off for a team speak server. This one I'm setting up for long term use. So I would like to know the best practice when it comes to websites and tasks that I have the server proforming. I understand that it could be beneficial to separate each website into it's own usergroup or under its own username. I would setup nginx so that it could read all of the users directors (and thus each website) but could not touch anything else. The same with the TeamSpeak, should I make a user for TeamSpeak so that it operates within its own confined area or is this overkill? I do have access to root on the sever and my current plan is to run about 4 websites and a TeamSpeak server. My stack is Linux (Ubuntu 11.04 LTS), nginx, and PHP 5.4.3 (using the PDO SQLite 3 built in driver for the database). Should PHP have it's own user group or is it ok to place it in with nginx?

Read the article
How do I renew a Web Server certificate in Windows Server 2008?

- by Mark Seemann

The SSL certificate for my web site just expired a few days ago, and I would like to renew it. I originally issued it two years ago using my Windows 2008 Certificate Authority, and it's worked without a hitch in all that time, so I would like to renew the certificate as simply as possible to make sure that all the applications relying on that certificate continue to work. I can open an MMC instance and add the Certificates snap-in for the Local Computer. I can find the relevant certificate under Personal, but I can't renew it. When I select Renew certificate with new key I get the following message: Web Server Status: Unavailable The permissions on the certificate template do not allow the current user to enroll for this type of certificate. You do not have permission to request this type of certificate. However, I can't understand this, as I'm logged on as a Domain Admin and I'm running the MMC instance in elevated mode. I've checked the Web Server certificate template, and Domain Admins have the Enroll permission on this template. FWIW, I also tried rebooting the server. How can I renew the certificate?

Read the article
Sharing disk volumes across OpenVZ guests to reduce Package Management Overhead

- by andyortlieb

Is it feasible to create a single "master" OpenVZ guest who would only be used for package management, and use something like mount --bind on several other OpenVZ guests sort of trick them into using the environment installed by the master guest? The point of this would be so that users can maintain their own containers, and yet stay in sync with the master development environment, so they'll always have the latest & greatest requirements without worrying too much about system administration. If they need to install their own packages, could put them in /opt, or /usr/local (or set a path to their home directory)? To rephrase, I would like several (developer's, for example) OpenVZ guests whose /bin, /usr (and so on...) actually refer to the same disk location as that of a master OpenVZ guest who can be started up to install and update common packages for the environment to be shared by all of this group of OpenVZ guests. For what it's worth, we're running Debian 6. Edit: I have tried mounting (bind, and readonly) /bin, /lib, /sbin, /usr in this fashion and it refuses to start the containers stating that files are already mounted or otherwise in use: Starting container ... vzquota : (error) Quota on syscall for id 1102: Device or resource busy vzquota : (error) Possible reasons: vzquota : (error) - Container's root is already mounted vzquota : (error) - there are opened files inside Container's private area vzquota : (error) - your current working directory is inside Container's vzquota : (error) private area vzquota : (error) Currently used file(s): /var/lib/vz/private/1102/sbin /var/lib/vz/private/1102/usr /var/lib/vz/private/1102/lib /var/lib/vz/private/1102/bin vzquota on failed [3] If I unmount these four volumes, and start the guest, and then mount them after the guest has started, the guest never sees them mounted.

Read the article
Managing Apache to Compensate for WebDAV's Security Masking

- by Tohuw

When a user creates a file via WebDAV, the default behavior is that the file is owned by the user and group running the Apache process, with a umask of 022. Unfortunately, this makes it impossible for unprivileged users to write to the files by other means without being a member of the group Apache runs under (which strikes me as a particularly bad idea). My current solution is to set umask 000 in Apache's envvars and remove all world permissions from the webdav parent directory for the user. So, if the WebDAV share is /home/foo/www, then /home/foo/www is owned by www-data:foo with permissions of 770. This keeps other unprivileged users out, more or less, but it's hokey at best and a security disaster awaiting at worst. From my research and poking around at mod_dav and Apache, I cannot find a reasonable solution short of a cron job flipping all the permissions back (I'd rather not have the load and increased complexity on the server). SuExec won't work, either, because WebDAV operations are not going to execute as a different user. Any thoughts on this? Thank you.

Read the article
Variable directory names over SCP

- by nedm

We have a backup routine that previously ran from one disk to another on the same server, but have recently moved the source data to a remote server and are trying to replicate the job via scp. We need to run the script on the target server, and we've set up key-based scp (no username/password required) between the two servers. Using scp to copy specific files and directories works perfectly: scp -r -p -B [email protected]:/mnt/disk1/bsource/filename.txt /mnt/disk2/btarget/ However, our previous routine iterates through directories on the source disk to determine which files to copy, then runs them individually through gpg encryption. Is there any way to do this only by using scp? Again, this script needs to run from the target server, and the user the job runs under only has scp (no ssh) access to the target system. The old job would look something like this: #Change to source dir cd /mnt/disk1 #Create variable to store # directories named by date YYYYMMDD j="20000101/" #Iterate though directories in the current dir # to get the most recent folder name for i in $(ls -d */); do if [ "$j" \< "$i" ]; then j=${i%/*} fi done #Encrypt individual files from $j to target directory cd ./${j%%}/bsource/ for k in $(ls -p | grep -v /$); do sudo /usr/bin/gpg -e -r "Backup Key" --batch --no-tty -o "/mnt/disk2/btarget/$k.gpg" "$/mnt/disk1/$j/bsource/$k" done Can anyone suggest how to do this via scp from the target system? Thanks in advance.

Read the article
Why would Windows use slower network interface despite route metrics?

- by tim11g

On my previous notebook, the Dell/Broadcom wireless adapter had an option to automatically disable wireless when a wired network is connected, so I never dealt with multiple active interfaces. My current system has an Intel wireless adapter, and they apparently haven't figured out how to turn it off when there is a wired connection. Unless I explicitly remember to disable wireless when docked, the connection is active. That shouldn't be a problem (in theory), since the route metric will cause traffic to go over the fastest network (as indicated by the lowest metric in the routing table). Apparently not - I'm running a backup and seeing the throughput at 25Mbps or so (which is consistent with 802.11g) when a perfectly good Gigabit Ethernet interface is also connected. IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.104 10 0.0.0.0 0.0.0.0 192.168.1.254 192.168.1.109 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 Windows has correctly identified the Ethernet interface (.104) and assigned it the lower (preferred) metric. So the Ethernet interface should be used exclusively, right? Why is the Ethernet connection not being used? What other factors are involved? (This is with Windows 7 if it makes a difference)

Read the article
time sync with ntpd

- by guthrie

I run Debian on several systems, and their times do not seem to stay in sync. I can run ntpdate manually, but I thought that I should have an ntpd running that would automate that. I did check with apt and apt-cache but don't find any ntpd (or associated ntpq), not any such names in my system (locate...), but ntp-doc does still describe them. Looking around I see that there is an ntpdate-debian command, and it uses /etc/default/ntpdate for servers (instead of the standard /etc/ntp.conf), but even thought that file is there and has "yes" indicated to use ntp.conf, it fails with "no servers can be used", although ntpdate works fine. Is this just a layer over ntpdate, any reason to use it instead? So, why are they missing, do I need them, how do I automate time updates? Associated, two of my machines are virtualized on a MSoft VM, how is it that their clocks drift, and both to different values? (The underlying Windows machine clock seems stable). I see a few old notes about time & ntp problems on VMware, didn't find anything either current or relating to MSoft VMs. Anything I did see says just to use ntpd, but as above, ...?!

Read the article
Will disabling hyperthreading improve performance on our SQL Server install

- by Sam Saffron

Related to: Current wisdom on SQL Server and Hyperthreading Recently we upgraded our Windows 2008 R2 database server from an X5470 to a X5560. The theory is both CPUs have very similar performance, if anything the X5560 is slightly faster. However, SQL Server 2008 R2 performance has been pretty bad over the last day or so and CPU usage has been pretty high. Page life expectancy is massive, we are getting almost 100% cache hit for the pages, so memory is not a problem. When I ran: SELECT * FROM sys.dm_os_wait_stats order by signal_wait_time_ms desc I got: wait_type waiting_tasks_count wait_time_ms max_wait_time_ms signal_wait_time_ms ------------------------------------------------------------ -------------------- -------------------- -------------------- -------------------- XE_TIMER_EVENT 115166 2799125790 30165 2799125065 REQUEST_FOR_DEADLOCK_SEARCH 559393 2799053973 5180 2799053973 SOS_SCHEDULER_YIELD 152289883 189948844 960 189756877 CXPACKET 234638389 2383701040 141334 118796827 SLEEP_TASK 170743505 1525669557 1406 76485386 LATCH_EX 97301008 810738519 1107 55093884 LOGMGR_QUEUE 16525384 2798527632 20751319 4083713 WRITELOG 16850119 18328365 1193 2367880 PAGELATCH_EX 13254618 8524515 11263 1670113 ASYNC_NETWORK_IO 23954146 6981220 7110 1475699 (10 row(s) affected) I also ran -- Isolate top waits for server instance since last restart or statistics clear WITH Waits AS ( SELECT wait_type, wait_time_ms / 1000. AS [wait_time_s], 100. * wait_time_ms / SUM(wait_time_ms) OVER() AS [pct], ROW_NUMBER() OVER(ORDER BY wait_time_ms DESC) AS [rn] FROM sys.dm_os_wait_stats WHERE wait_type NOT IN ('CLR_SEMAPHORE','LAZYWRITER_SLEEP','RESOURCE_QUEUE', 'SLEEP_TASK','SLEEP_SYSTEMTASK','SQLTRACE_BUFFER_FLUSH','WAITFOR','LOGMGR_QUEUE', 'CHECKPOINT_QUEUE','REQUEST_FOR_DEADLOCK_SEARCH','XE_TIMER_EVENT','BROKER_TO_FLUSH', 'BROKER_TASK_STOP','CLR_MANUAL_EVENT','CLR_AUTO_EVENT','DISPATCHER_QUEUE_SEMAPHORE', 'FT_IFTS_SCHEDULER_IDLE_WAIT','XE_DISPATCHER_WAIT', 'XE_DISPATCHER_JOIN')) SELECT W1.wait_type, CAST(W1.wait_time_s AS DECIMAL(12, 2)) AS wait_time_s, CAST(W1.pct AS DECIMAL(12, 2)) AS pct, CAST(SUM(W2.pct) AS DECIMAL(12, 2)) AS running_pct FROM Waits AS W1 INNER JOIN Waits AS W2 ON W2.rn <= W1.rn GROUP BY W1.rn, W1.wait_type, W1.wait_time_s, W1.pct HAVING SUM(W2.pct) - W1.pct < 95; -- percentage threshold And got wait_type wait_time_s pct running_pct CXPACKET 554821.66 65.82 65.82 LATCH_EX 184123.16 21.84 87.66 SOS_SCHEDULER_YIELD 37541.17 4.45 92.11 PAGEIOLATCH_SH 19018.53 2.26 94.37 FT_IFTSHC_MUTEX 14306.05 1.70 96.07 That shows huge amounts of time synchronizing queries involving parallelism (high CXPACKET). Additionally, anecdotally many of these problem queries are being executed on multiple cores (we have no MAXDOP hints anywhere in our code) The server has not been under load for more than a day or so. We are experiencing a large amount of variance with query executions, typically many queries appear to be slower that they were on our previous DB server and CPU is really high. Will disabling Hyperthreading help at reducing our CPU usage and increase throughput?

Read the article
Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

- by Lairsdragon

Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

Read the article
New Windows Server 2008 R2 WIMP running slower than Windows Server 2003

- by starshine531

We recently upgraded a WIMP server from Windows Server 2003 (32 bit) to Windows Server 2008 R2 (64 bit). The new server has significantly better hardware than the old server, yet many processes take much longer than the old box. We have a rather complex web application process that normally takes about 7 seconds on the old box, but on the new one it takes 11-12 seconds. That's down from 15.5 seconds it took before I disabled IPV6. This process involves some queries (some of them involve transactions with maybe 3 queries between the start and commit) and creating and emailing some pdfs. Windows updates are current with a more or less fresh machine. This happens consistently even when we have almost no traffic on the site and memory and cpu aren't being hard pressed at all. The only differences between the servers other than the OS and hardware: 1) When available, we used 64 bit versions of programs 2) The new server uses MySQL 5.5 rather than MySQL 5.1 (I did run the mysql_upgrade program and we use InnoDB for the engine) 3) The new server uses PHP Version 5.3.18 rather than PHP Version 5.3.1 4) With the new OS came IIS7 rather than IIS6 of course. What could be causing better hardware to run so much slower? Let me know if you need more details. Thank you.

Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597 | Next Page >