Search Results

Search found 20021 results on 801 pages for 'software engeneering learner'.

Page 590/801 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

• Trouble dual booting Ubuntu 14.04 & Windows 8

  - by AkBKukU

  My motherboard (MSI G45-Z87) has efi, I still can't figure out how to make stuff work with it. I had Ubuntu working with Windows 8 before 14.04 came out and I did a clean install of Ubuntu when it did to upgrade. Since then I hadn't been able to boot Windows but I don't use it anyway so it didn't effect me. I tried getting it working today so I could use some adobe software. The last time I had tried to do something with the boot it was giving me warnings that my boot files were to far in the drive. So I followed this guide to use gparted and boot-repair to add a boot partition. I was able to reboot Ubuntu after that. I then proceeded to install Windows 8.1 to a different drive. Now the computer will only boot straight into Windows and if I manually select Ubuntu, but not the drive Ubuntu is on, to boot it stops on a black screen during boot after showing the Ubuntu logo. I've run boot-repair in several different ways but have had no luck. Here is the boot summary info from the recommended settings for it. I could really use some help.

  Read the article

• Will my RAID0 stay intact when I move it to a new computer?

  - by Jeremy H

  My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

  Read the article

• Cloning single disk drive to multiple drives simultaneously

  - by mr.b

  I am looking for a way to clone single disk drive to more than one disk drive at the same time. I have prepared system images on 1TB disks, and it takes almost 2 hours to clone one disk to another, and then it goes up exponentially, in order to have say 30 disks cloned. If it was possible to clone one disk to more than single target, it would simplify whole procedure a lot. Also, is there something that prevents this kind of operation? I mean, is there some special reason why every disk cloning software that I know about supports only single target drive? Thanks!

  Read the article

• Logging off does not kill process in Windows Server 2003

  - by user25951

  I have a Windows Server 2003(Enterprise, SP2). My understanding was that any process created by a user will be terminated when the user loggs off the account. But its not happening. I login via Administrator account. Start a simple java process and logoff. But the process is not killed. Is there any configuration for this or something? I am mostly a software programmer and not much in to servers and so I am stuck. I found out that while logging off, 1) Win32 is supposed to send a CTRL_LOGOFF_EVENT to all processes started by that user. 2) JVM is supposed to handle this event and terminate the VM. But I can't understand why my java process is not killed when i logoff. Any idea!!!

  Read the article

• Proper way to partition filesystem with Xen

  - by luckytaxi

  I'm coming from a vmware environment, wanting to play with Xen. I have a server with 2 x 500G SATA drives (no hardware RAID available, have to use software-based RAID1). My partitions are all RAID1 except for swap. I left a little over 400G for my VMs and I would like to use LVM for the disk images. For domU's swap, should I allocate that from the 400G or should that be coming from dom0's partition? I asked because I've seen numerous config options that shows either or.

  Read the article

• Looking for a router with multiple WAN ports and load balancing

  - by Cyrcle

  I'm going to be moving in a few months. The location I'm moving to is great except it's on a road with very few people, so the internet access option is limited to DSL at 1.6Mbps down, 384kbps up. This is much slower than I'm used to. One option is to get at least two of the DSL lines. There's also good possibility that I'll be able to get WiMax or similar. I've been looking around a bit and it seems like what I need is a load balancing router with multiple WAN ports. Can anyone recommend some good ones? I could also go with a small power efficient Linux box with multiple NICs. What would be good software for that? It'd need to be able to handle around 10Mbps. Thanks for any help

  Read the article

• Xnest from Mac OSX to HP UX

  - by Burbas

  Hi, I'm trying to connect to my HP/UX machine from Mac OS X using Xnest. The problem is that I can not get the keyboard to work. I can see the login-prompt, but unable to type in my username. The connection is done by: Xnest :1 -query 192.168.0.193 -geometry 1280x1024 and it gives me some errors: (EE) AIGLX error: dlopen of /usr/X11/lib/dri/swrast_dri.so failed (dlopen(/usr/X11/lib/dri/swrast_dri.so, 5): image not found) (EE) GLX: could not load software renderer (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base (EE) XKB: No components provided for device Virtual core keyboard Couldn't get keyboard. I hope there is someone here who might have the answer :-).

  Read the article

• Host a Debian repository on a Windows Web/Ftp server

  - by Dave

  At the risk of causing a matter vs. antimatter paradox that would end the world as we know it ... Is it possible to host a Debian repository on a Windows server? We have some applications which are available for Windows, Mac OS X, and Linux. Our web site, from where the application can be downloaded, is a Windows Server 2008 box running IIS 7. That is not going to change, and I would like to avoid having to purchase another server and/or domain. I would like to take advantage of the Debian packaging system so that I can just instruct users to add our repository to their software sources, and then they can install, get updates, resolve dependencies (some of which are not yet in the stable/main distributions of my target platforms), etc. The instructions I can find on the internet require linux-specific tools to create a local repository, but are unclear as to whether or not that can be copied to an FTP site as is, or if it requires some local daemons to be running or something.

  Read the article

• View the Time & Date in Chrome When Hiding Your Taskbar

  - by Asian Angel

  Do you prefer keeping your Taskbar hidden but still need to keep watch on what time it is? Now you can keep track of the time without the Taskbar using the Date Today extension for Google Chrome. A Look at Date Today with Different Themes This extension does one thing and does it well…it provides you with an “active icon” clock that will let you view the time and date in two fashions. The first is by hovering your mouse over the “Toolbar Clock Button”… And the second is by clicking on the “Toolbar Clock Button” to view an enlarged version. Here you can see the extension in use with five different themes to get an idea of how it might look with the theme that you are currently using. It does stand out very nicely with brighter or darker colored themes. Conclusion While this extension is obviously not for everyone it will make a nice (and useful) addition to Chrome for those who prefer keeping their Taskbar hidden. Links Download the Date Today extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Set the Date and Time on SolarisView Browser History Based on Host & Date in ChromeQuick Tip: Set a Future Date for a Post in WordPressFuture Date a Post in Windows Live WriterSave Screen Space by Hiding the Bookmarks Toolbar in Safari for Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs

  Read the article

• About the new Microsoft Innovation Center (MIC) in Miami

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/08/21/about-the-new-microsoft-innovation-center-mic-in-miami.aspxLast night I attended a meeting at the new MIC in Miami, run by Blain Barton (@blainbar), Sr IT Pro Evangelist at Microsoft. The meeting was well attended and is meant to be run as a user group format in a casual setting. Many of the local Microsoft MVPs and group leaders were in attendance as well, which allows technical folks to connect with community leaders in the area. If you live in South Florida, I highly recommend to look out for future meetings at the MIC; most meetings will be about the Microsoft Azure platform, either IT Pro or Dev topics. For more information on the MIC, check out this announcement:  http://www.microsoft.com/en-us/news/press/2014/may14/05-02miamiinnovationpr.aspx. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• I am not the most logically-organized person. Do I have any chance at being a good 'low-level' programmer?

  - by user217902

  Background: I am entering college next year. I really enjoy making stuff and solving logical problems, so I'm thinking of majoring in compsci and working in software development. I hope to have the kind of job where I can work with implementing / improving algorithms and data structures on a regular basis.. as opposed to, say, a job that's purely concerned with mashing different libraries together, or 'finding the right APIs for the job'. (Hence the word 'low-level' in the title. No, I don't wish to write assembly all day.) Thing is, I've never been the most logically-sharp person. Thus far I have only worked on hobby projects, but I find that I make the silliest of errors ever so often, and it can take me ages to find it. Like anywhere between three hours to a day to locate a simple segfault, off-by-one error, or other logical mistake. (Of course, I do other things in the meantime, like browsing SO, reddit, and the like..) It's not like I'm 'new' to programming either; I first tried C++ maybe five years ago. My question is: is this normal? Should a programmer with any talent solve it in less time? Having read Spolsky's Smart and gets things done, where he talks about the large variance in programming speed, am I near the bottom of the curve, and therefore destined to work in companies that cannot afford to hire quality programmers? I'd like to think that conceptually I'm okay -- I can grasp algorithms and concepts pretty well, I do fine in math and science, although I probably drop signs in my equations more often than the next guy. Still, grokking concepts makes me happy, and is the reason why I want to work with algorithms. I'm hoping to hear from those of you with real-world programming experience. TL;DR: I make many careless mistakes, should I not consider programming as a career?

  Read the article

• Streaming audio to headless linux box

  - by Ralph

  I have a dual boot (Win 7 + Ubuntu) PC connected via wifi with my music collection on a local HDD. I usually use Rhythmbox on Ubuntu or Winamp on Windows to listen to my music but I'll change if I have to. I also have a Raspberry Pi (low power PC running Debian) in the living room that is usually headless and connected via ethernet. The Raspberry Pi is also connected to my living room speakers via an amp. I would like to be able to stream music from my PC over the network to the linux raspberry pi. What software can I use to do this? Some sort of audio client\server?

  Read the article

• Desktop speakers with headphone port and separate volume controls

  - by Kevin L.

  I currently use the excellent Logitech X-230 desktop speaker/subwoofer set, which I love for the volume dial on the front which gives me a nice, quick, tactile control of my sound without requiring a remote or keyboard buttons or some awkward software slider. Additionally, there's a very convenient headphone jack right next to the volume dial but the volume dial only controls the speakers, leaving the headphones at full volume. The goal is to be able to adjust the sound in my headphones without having to fumble around and find an inline headphone volume control (and my current favorite pair doesn't even have one). Is anyone aware of a desktop speaker set that has convenient volume controls for both levels?

  Read the article

• Mobile development, recommended computer configuration?

  - by MikaelW

  Hi, For the last 4 weeks, I have been trying to get into mobile development. Done a couple of tutorials, read some books, developed a couple of dummy Android apps. The thing is my computer is a 5 years old laptop, it is slow and time has come to replace it and I’m looking at different offers online. Have you got any recommendations? Is there any must-have that should make my developer life easier in the future? Is there anything specific that may be useful at a more advanced stage of development that I just can’t think of right now on the hardware side? (I mean apart from good proc, lots of RAM, many USB ports...) One thing I can think of is to have three OS on the same workstation: Windows, Unix and MacOS (so far I focused on android/java/eclipse but am interested in Iphone/objC/xcode as well) but that’s more on the software side. Anyway, would be grateful for any recommendations. Thanks in advance! Mikael PS: I’m quite free on the budget side of things PPS: I'm aware it's not really a programming question but will still be of interest to some programmers here.

  Read the article

• vps running out of memory, 200MB free

  - by demon

  At the beginning of this year I took a VPS for my website because I was running against the resource limits from a shared hosting. Here are the things I know: 2GB memory, with 1GB swap Debian X64 server ED installed Software running on the webserver: mysql apache postfix pop3 imap amavisd clamd cron fail2ban munin-node pure-ftpd spamd nginx Now for the setup: Nginx listens on port 80 and handles the static files, the php side is done by apache2 running mod_php in combi with apc(no var caching!). Iam using a pretty 'busy' drupal and phpbb stack on the server, for drupal iam using boost and authcache to handle of the server load with a pressflow stack. phpbb is just phpbb3 with some mods installed, but has at max 30 users online at a time.. The problem is that its staring to use the swap after a few days after a reboot and thus the site becomes slower. I'v added pictures of monit and munin, so maybe somebody can help me out... Monit: Munin:

  Read the article

• Standalone server setup for compute capacity

  - by mikera

  I'm developing an application for my company that will require a lot of compute capacity (running some very big mathematical calculations), and looking for some form of server setup to do this. For various reasons, we want to run this on-site in our office rather than hosting it externally. It's been a while since I last had to set up my own servers so I thought I would tap into the collective wisdom of serverfault! My broad requirements are: Budget $30-50k, with an aim to get as much compute capacity as possible for that budget 64-bit servers suitable to run Ubuntu Linux + Java Some relatively standalone rack that can be installed in secure office space Fast/low latency network connections between the servers, but don't really care about connectivity to the outside world Storage capacity shared between the servers - they don't necessarily need their own storage providing they can be booted from a common image Downtime can be tolerated (since the calculations are run in batch mode) The software itself is fault-tolerant, so there is no need for extra resiliency in the server setup (cheap replaceable commodity parts will be fine in general) Given these requirements what kind of setup would you recommend and why?

  Read the article

• Why doesn't Ghost 2003 offer to fill the destination drive?

  - by Neil

  Because it is dangerously low on disk space, I want to upgrade an SBS 2003 server by replacing its existing 72GB drive with a 364GB drive. When I tried to use Norton Ghost 2003 to clone the disk it didn't suggest that I use the entire new drive. I'm worried that I caused the process to fail by overriding its decision - although the cloned drive boots in Safe Mode, if I try booting it normally then none of the SQL Express instances start and something causes the server to reboot before even the Ctrl+Alt+Del screen appears. Does Ghost 2003 know something that I don't? Or should I be using some other software?

  Read the article

• Force snmptrapd to log only v2c traps

  - by dare2be

  Hello, I am in the middle of writing new network management software for my University. However, I need to implement a quickie solution to handle specific traps. Right now, my snmptrapd is configured to accept any traps, i.e.: # /etc/snmp/snmptrapd.conf authCommunity log publicString logOption f /var/log/snmptrapd.log format1 "" format2 "%02.2h:%02.2j %b %N\n" What I basically want to do is to log ONLY v2c traps. I intended to do it with setting the format for v1 traps to null (format 1 "") but snmptrapd keeps sending "" to its log. Does anybody know a workaround for this?

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• Content delivery: Alternatives to SHOUTcast

  - by polemon

  I've been using Icecast and SHOUTcast for several years now, to deliver audio and Video content. I wonder what kind of alternatives do I have to those two, especially when streaming video. On the client side, what software can I choose from to stream to those servers live? Making the streams available with Flash would be great, but that's maybe another story. We're still using EdCast, which is kinda dead by now, Shoutcast DSP plugin is not an option, as this tends to crash, etc. Are there any alternatives to that, when livestreaming video? I'm using Liquidsoap for content generation, mixing, etc. It should work with Icecast, Liquidsoap and if possible SHOUTcast.

  Read the article

• Is it worth moving from Microsoft tech to Linux, NodeJS & other open source frameworks to save money for a start-up?

  - by dormisher

  I am currently getting involved in a startup, I am the only developer involved at the moment, and the other guys are leaving all the tech decisions up to me at the moment. For my day job I work at a software house that uses Microsoft tech on a day to day basis, we utilise .NET, SqlServer, Windows Server etc. However, I realise that as a startup we need to keep costs down, and after having a brief look at the cost of hosting for Windows I was shocked to see some of the prices for a dedicated server. The cheapest I found was £100 a month. Also if the business needs to scale in the future and we end up needing multiple servers, we could end up shelling out £10's of £000's a year in SQL Server / Windows Server licenses etc. I then had a quick look at the price of Linux hosting for a dedicated server and saw the price was waaaaaay lower than windows hosting. One place was offering a machine with 2 cores for less than £20 a month. This got me thinking maybe the way to go is open source on Linux. As I write a lot of Javascript at work (I'm working on a single page backbone app at the moment), I thought maybe NodeJS and a web framework like Express would be cool to use. I then thought that instead of using SQL why not use an open source NoSQL database like MongoDB, which has great support on NodeJS? My only concern is that some of the work the application is going to do is going to be dynamically building images and various other image related stuff, i.e. stuff that is quite CPU heavy - so I'm thinking of maybe writing anything CPU heavy in C++ and consuming it as a module in Node. That's the background - but basically is Linux a good match for: Hosting a NodeJS/Express site? Compiling C++ node modules? Using a NoSQL DB like MongoDB? And is it a good idea to move to these unfamiliar technologies to save money?

  Read the article

• New Certification Exam: "Oracle Database 12c: SQL Fundamentals" Released (1Z0-061)

  - by Brandye Barrington

  Oracle Certification begins testing this week for the new Oracle Database 12c Administrator Certified Associate (OCA) certification.  Testing for the Oracle Database 12c: SQL Fundamentals (1Z0-061) exam is now underway. Visit pearsonvue.com/oracle and register for exam 1Z0-061. You can get all preparation details, including exam objectives, number of questions, time allotments, and pricing on the Oracle Certification Website. Earning the Oracle Database 12c Administrator Certified Associate (OCA) credential demonstrates that you carry the foundational knowledge and skills needed to administer the Oracle Database, and sets the stage for your future progression to Oracle Database 12c Administrator Certified Professional (OCP). With Oracle Database 12c, you will experience the benefits of an Oracle Database that is re-engineered for Cloud computing. Multitenant architecture brings enterprises unprecedented hardware and software efficiencies, performance and manageability benefits, and fast and efficient Cloud provisioning. Oracle Database 12c certifications emphasize the full set of skills that DBAs need in today's competitive marketplace. Be among the first to obtain this ground breaking new Oracle Certified Associate (OCA) certification by registering for this exam today. QUICK LINKS Certification Path: Oracle Database 12c Administrator Certified Associate (OCA) Certification Exam: Oracle Database 12c: SQL Fundamentals (1Z0-061) Registration: pearsonvue.com/oracle

  Read the article

• How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

  - by patricksweeney

  I have a Samsung Series 7 with the Radeon 6750M switchable graphics. The ATI software lets you force programs to use the dedicated card. However, I'm not convinced it is actually ever using it, as the frame rates on some non-taxing games (Portal, TF2) are merely OK. To make matters worse, it looks like the ATI Catalyst Control has vanished from my laptop. To make it even worse, you can't download the driver and ATI CCC from ATI's site, you need to download it from Samsung, and the ZIP they provide is corrupted. How can I ensure my Samsung Series 7 is actually using the Radeon switchable graphics?

  Read the article

• How do I route traffic to website using a spcified network connection on Windows 7

  - by rwetzeler

  I want to route all traffic to a website over my wireless connection while the rest of the traffic using my lan. What I tried was first finding out the IP address of the website I want to go to. For example, lets say pandora.com. I found it resolves to 208.85.40.20. I have entered that entry into my hosts file. I then added that route using route add 208.85.40.20 mask 255.255.255.255 WirelessIP. It doesn't seem to work however. Instead of using the IP address, is there a way that I can just say.. this URL to route over that connection? Does anyone know of a program that I can install that will do this.. possibly some sort of proxy or a software load balancer that can do this?

  Read the article

• Working with Active Directory and Windows Small Business Server 2008

  - by AreYouSerious

  I have to say that in most of my time as a network engineer I have had the opportunity to play with servers, but mostly it's been to put our management software on, and that was about it. I have been a Systems Network Engineer for about three months now, and as such I have been respnosible for the configuration of our test devices... this being said, I have had to start working through how to configure and apply such things as GPO through a new forest, domain and OU. This being said I have configured about three different GPO's and applied them to different locations. The first laptop that I brought into the domain took the default Domain group Policy... this was cool, I got excited... then When I tried to bring in the second Laptop, it didn't take the policy. I looked at the configuration, and the default domain policy was applied to domain computers, however since the laptop resides in the SBS Computers of the OU that was created, SBS created individual policies for XP and Vista for that OU, which I was unaware of. So the default policy for that ou overrode the domain policy and none of the options that were defined in the Domain policy were applied... this being said, I am now working on putting the default Domain as an applicable policy in the OU, thus I won't have to reconfigure another policy to mirror the Domain Policy... here goes nothing!!!.... More to follow Later.

  Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >