Search Results

Search found 60456 results on 2419 pages for 'windows embedded compact'.

Page 590/2419 | < Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >

  • Shrink NTFS Windows 7 Partition with GParted

    - by user15961
    I am running a dual-boot system with Windows 7 and Ubuntu 10.10. Initially I allocated about 20GB for my Ubuntu partition; however, I quickly ran out of that space and am now looking to expand my partition. Currently my NTFS partition (450GB) has about 130GB of free space. I tried using GParted to shrink the partition but encountered the following error. I booted into windows so I could run chkdsk but the countdown freezes at 1 upon reboot. I tried multiple methods to resolve that issue but nothing seems to work. Finally I gave up, and now I just want to know what is the best way for me to force GParted to shrink the partition regardless of the errors. I don't really have anything important and I don't mind risking the data. I just don't want to wipe the entire NTFS partition because I don't have a Windows install CD and might require Windows later on for some programs. I tried using sudo ntfsresize but that spews out the same error as GParted... Any ideas? Check and repair file system (ntfs) on /dev/sda2 00:00:09 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 36944325 end: 976771119 size: 939826795 (448.14 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:09 ( ERROR ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2.0.0 (libntfs 10:0:0) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 481191318016 bytes (481192 MB) Current device size: 481191319040 bytes (481192 MB) Checking for bad sectors ... Checking filesystem consistency ... Cluster 63468 is referenced multiple times! Cluster 63469 is referenced multiple times! Cluster 63465 is referenced multiple times! Cluster 63466 is referenced multiple times! Cluster 63467 is referenced multiple times! Cluster 165621 is referenced multiple times! Cluster 165622 is referenced multiple times! Cluster 165623 is referenced multiple times! Cluster 165624 is referenced multiple times! ERROR: Filesystem check failed! ERROR: 9 clusters are referenced multiply times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired.

    Read the article

  • Best way to remote restart Ubuntu from Windows machine

    - by robsoft
    Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

    Read the article

  • Remote Graphics Diagnostics with Windows RT 8.1 and Visual Studio 2013

    - by Michael B. McLaughlin
    Originally posted on: http://geekswithblogs.net/mikebmcl/archive/2013/11/12/remote-graphics-diagnostics-with-windows-rt-8.1-and-visual-studio.aspxThis blog post is a brief follow up to my What’s New in Graphics and Game Development in Visual Studio 2013 post on the MVP Award blog. While writing that post I was testing out various features to try to make sure everything worked as expected. I had some trouble getting Remote Graphics Diagnostics (a/k/a remote graphics debugging) working on my first generation Surface RT (upgraded to Windows RT 8.1). It was more strange since I could use remote debugging when doing CPU debugging; it was just graphics debugging that was causing trouble. After some discussions with the great folks who work on the graphics tools in Visual Studio, they were able to repro the problem and recommend a solution. My Surface RT needed the ARM Kits policy installed on it. Once I followed the instructions on the previous link, I could successfully use Remote Graphics Diagnostics on my Surface RT. Please note that this requires Windows RT 8.1 RTM (i.e. not Preview) and that Remote Graphics Diagnostics on ARM only works when you are using Visual Studio 2013 as it is a new feature (it should work just fine using the Express for Windows version). Also, when I installed the ARM Kits policy I needed to do two things to get it to work properly. First, when following the “How to install the Kits policy” instructions, I needed to copy the SecureBoot folder into Program Files on my Surface RT (specifically, I copied the SecureBoot folder to “C:\Program Files\Windows Kits\8.1\bin\arm\” on my Surface RT, creating any necessary directories). It may work if it’s in any system folder; I didn’t test any others after I got it working. I had initially put it in my Downloads folder and tried installing it from there. When the machine restarted it displayed a worrisome error message. I repeatedly pressed the button that would allow me to retry and eventually the machine rebooted and managed to recover itself to its previous state. Second, I needed to install it as an Administrator. The instructions say that this might be necessary. For me it was. This is a Remote Graphics Diagnostics is a great new feature in Visual Studio 2013 so I definitely encourage all of you to check it out!

    Read the article

  • Project compile perfectly but i get unhandled exception and have no idea why??? any clues?

    - by JB
    get unhandled exception that says: System.NullReferenceException: Object reference not set to an instance of an object. at Eagle_Eye_Class_Finder.GetSchedule.GetDataFromNumber(String ID) in C:\Users\Joshua Banks\Desktop\EET Project\Eagle Eye Class Finder\GetSchedule.cs:line 24 at Eagle_Eye_Class_Finder.Form1.button2_Click(Object sender, EventArgs e) in C:\Users\Joshua Banks\Desktop\EET Project\Eagle Eye Class Finder\Form1.cs:line 196 at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.PerformClick() at System.Windows.Forms.Form.ProcessDialogKey(Keys keyData) at System.Windows.Forms.Control.ProcessDialogKey(Keys keyData) at System.Windows.Forms.TextBoxBase.ProcessDialogKey(Keys keyData) at System.Windows.Forms.Control.PreProcessMessage(Message& msg) at System.Windows.Forms.Control.PreProcessControlMessageInternal(Control target, Message& msg) at System.Windows.Forms.Application.ThreadContext.PreTranslateMessage(MSG& msg) Here is my Get Schedule Class: using System; using System.IO; using System.Data; using System.Text; using System.Drawing; using System.Data.OleDb; using System.Collections; using System.ComponentModel; using System.Windows.Forms; using System.Drawing.Printing; using System.Collections.Generic; namespace Eagle_Eye_Class_Finder { public class GetSchedule { public string GetDataFromNumber(string ID) { IDnumber[] IDnumbers = new IDnumber[3]; foreach (IDnumber IDCandidateMatch in IDnumbers) { if (IDCandidateMatch.ID == ID) { StringBuilder myData = new StringBuilder(); myData.AppendLine(IDCandidateMatch.Name); myData.AppendLine(": "); myData.AppendLine(IDCandidateMatch.ID); myData.AppendLine(IDCandidateMatch.year); myData.AppendLine(IDCandidateMatch.class1); myData.AppendLine(IDCandidateMatch.class2); myData.AppendLine(IDCandidateMatch.class3); myData.AppendLine(IDCandidateMatch.class4); //return myData; return myData.ToString(); } } return ""; } public GetSchedule() { IDnumber[] IDnumbers = new IDnumber[3]; IDnumbers[0] = new IDnumber() { Name = "Joshua Banks", ID = "900456317", year = "Senior", class1 = "TEET 4090", class2 = "TEET 3020", class3 = "TEET 3090", class4 = "TEET 4290" }; IDnumbers[1] = new IDnumber() { Name = "Sean Ward", ID = "900456318", year = "Junior", class1 = "ENGNR 4090", class2 = "ENGNR 3020", class3 = "ENGNR 3090", class4 = "ENGNR 4290" }; IDnumbers[2] = new IDnumber() { Name = "Terrell Johnson", ID = "900456319", year = "Sophomore", class1 = "BUS 4090", class2 = "BUS 3020", class3 = "BUS 3090", class4 = "BUS 4290" }; } public class IDnumber { public string Name { get; set; } public string ID { get; set; } public string year { get; set; } public string class1 { get; set; } public string class2 { get; set; } public string class3 { get; set; } public string class4 { get; set; } public static void ProcessNumber(IDnumber myNum) { StringBuilder myData = new StringBuilder(); myData.AppendLine(myNum.Name); myData.AppendLine(": "); myData.AppendLine(myNum.ID); myData.AppendLine(myNum.year); myData.AppendLine(myNum.class1); myData.AppendLine(myNum.class2); myData.AppendLine(myNum.class3); myData.AppendLine(myNum.class4); MessageBox.Show(myData.ToString()); } } } } Here is my Form 1 class: using System; using System.IO; using System.Data; using System.Text; using System.Drawing; using System.Data.OleDb; using System.Collections; using System.Windows.Forms; using System.ComponentModel; using System.Drawing.Printing; using System.Collections.Generic; namespace Eagle_Eye_Class_Finder { /// This form is the entry form, it is the first form the user will see when the app is run. /// public class Form1 : System.Windows.Forms.Form { private System.Windows.Forms.TextBox textBox1; private System.Windows.Forms.ProgressBar progressBar1; private System.Windows.Forms.PictureBox pictureBox1; private System.Windows.Forms.Button button2; private System.Windows.Forms.DateTimePicker dateTimePicker1; private IContainer components; private Timer timer1; private BindingSource form1BindingSource; public static Form Mainform = null; // creates new instance of second form YOURCLASSSCHEDULE SecondForm = new YOURCLASSSCHEDULE(); public Form1() { InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { this.components = new System.ComponentModel.Container(); System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(Form1)); this.textBox1 = new System.Windows.Forms.TextBox(); this.progressBar1 = new System.Windows.Forms.ProgressBar(); this.pictureBox1 = new System.Windows.Forms.PictureBox(); this.button2 = new System.Windows.Forms.Button(); this.dateTimePicker1 = new System.Windows.Forms.DateTimePicker(); this.timer1 = new System.Windows.Forms.Timer(this.components); this.form1BindingSource = new System.Windows.Forms.BindingSource(this.components); ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).BeginInit(); ((System.ComponentModel.ISupportInitialize)(this.form1BindingSource)).BeginInit(); this.SuspendLayout(); // // textBox1 // this.textBox1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.textBox1.DataBindings.Add(new System.Windows.Forms.Binding("Text", this.form1BindingSource, "Text", true, System.Windows.Forms.DataSourceUpdateMode.OnValidation, null, "900456317")); this.textBox1.Location = new System.Drawing.Point(328, 280); this.textBox1.Name = "textBox1"; this.textBox1.Size = new System.Drawing.Size(208, 20); this.textBox1.TabIndex = 2; this.textBox1.TextChanged += new System.EventHandler(this.textBox1_TextChanged); // // progressBar1 // this.progressBar1.Location = new System.Drawing.Point(258, 410); this.progressBar1.MarqueeAnimationSpeed = 10; this.progressBar1.Name = "progressBar1"; this.progressBar1.Size = new System.Drawing.Size(344, 8); this.progressBar1.TabIndex = 3; this.progressBar1.Click += new System.EventHandler(this.progressBar1_Click); // // pictureBox1 // this.pictureBox1.BackColor = System.Drawing.SystemColors.ControlLightLight; this.pictureBox1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.pictureBox1.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox1.Image"))); this.pictureBox1.Location = new System.Drawing.Point(680, 400); this.pictureBox1.Name = "pictureBox1"; this.pictureBox1.Size = new System.Drawing.Size(120, 112); this.pictureBox1.TabIndex = 4; this.pictureBox1.TabStop = false; this.pictureBox1.Click += new System.EventHandler(this.pictureBox1_Click); // // button2 // this.button2.Font = new System.Drawing.Font("Mistral", 15.75F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.button2.Image = ((System.Drawing.Image)(resources.GetObject("button2.Image"))); this.button2.Location = new System.Drawing.Point(699, 442); this.button2.Name = "button2"; this.button2.Size = new System.Drawing.Size(78, 28); this.button2.TabIndex = 5; this.button2.Text = "OK"; this.button2.Click += new System.EventHandler(this.button2_Click); // // dateTimePicker1 // this.dateTimePicker1.Location = new System.Drawing.Point(336, 104); this.dateTimePicker1.Name = "dateTimePicker1"; this.dateTimePicker1.Size = new System.Drawing.Size(200, 20); this.dateTimePicker1.TabIndex = 6; this.dateTimePicker1.ValueChanged += new System.EventHandler(this.dateTimePicker1_ValueChanged); // // timer1 // this.timer1.Tick += new System.EventHandler(this.timer1_Tick); // // form1BindingSource // this.form1BindingSource.DataSource = typeof(Eagle_Eye_Class_Finder.Form1); // // Form1 // this.AcceptButton = this.button2; this.AutoScaleBaseSize = new System.Drawing.Size(5, 13); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(856, 556); this.Controls.Add(this.dateTimePicker1); this.Controls.Add(this.button2); this.Controls.Add(this.pictureBox1); this.Controls.Add(this.progressBar1); this.Controls.Add(this.textBox1); this.Name = "Form1"; this.Text = "Eagle Eye Class Finder"; this.Load += new System.EventHandler(this.Form1_Load); ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).EndInit(); ((System.ComponentModel.ISupportInitialize)(this.form1BindingSource)).EndInit(); this.ResumeLayout(false); this.PerformLayout(); } #endregion /// The main entry point for the application. [STAThread] static void Main() { Application.Run(new Form1()); } public void Form1_Load(object sender, System.EventArgs e) { } public void textBox1_TextChanged(object sender, System.EventArgs e) { //allows only numbers to be entered in textbox string Str = textBox1.Text.Trim(); double Num; bool isNum = double.TryParse(Str, out Num); if (isNum) Console.ReadLine(); else MessageBox.Show("Enter A Valid ID Number!"); } public void button2_Click(object sender, System.EventArgs e) { string text = textBox1.Text; Mainform = this; this.Hide(); GetSchedule myScheduleFinder = new GetSchedule(); string result = myScheduleFinder.GetDataFromNumber(text); if (!string.IsNullOrEmpty(result)) { MessageBox.Show(result); } else { MessageBox.Show("Enter A Valid ID Number!"); } } public void dateTimePicker1_ValueChanged(object sender, System.EventArgs e) { } public void pictureBox1_Click(object sender, System.EventArgs e) { } public void progressBar1_Click(object sender, EventArgs e) { //this.progressBar1 = new System.progressBar1(); //progressBar1.Maximum = 200; //progressBar1.Minimum = 0; //progressBar1.Step = 20; } private void timer1_Tick(object sender, EventArgs e) { //if (progressBar1.Value >= 200 ) //{ //progressBar1.Value = 0; //} //return; //} //progressBar1.Value != 20; } } } here is my form 2 class: using System; using System.Drawing; using System.Collections; using System.ComponentModel; using System.Windows.Forms; namespace Eagle_Eye_Class_Finder { /// /// Summary description for Form2. /// public class YOURCLASSSCHEDULE : System.Windows.Forms.Form { public System.Windows.Forms.LinkLabel linkLabel1; public System.Windows.Forms.LinkLabel linkLabel2; public System.Windows.Forms.LinkLabel linkLabel3; public System.Windows.Forms.LinkLabel linkLabel4; private Button button1; /// Required designer variable. public System.ComponentModel.Container components = null; public YOURCLASSSCHEDULE() { // InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(YOURCLASSSCHEDULE)); this.linkLabel1 = new System.Windows.Forms.LinkLabel(); this.linkLabel2 = new System.Windows.Forms.LinkLabel(); this.linkLabel3 = new System.Windows.Forms.LinkLabel(); this.linkLabel4 = new System.Windows.Forms.LinkLabel(); this.button1 = new System.Windows.Forms.Button(); this.SuspendLayout(); // // linkLabel1 // this.linkLabel1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel1.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel1.LinkArea = new System.Windows.Forms.LinkArea(0, 7); this.linkLabel1.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel1.Location = new System.Drawing.Point(41, 123); this.linkLabel1.Name = "linkLabel1"; this.linkLabel1.Size = new System.Drawing.Size(288, 32); this.linkLabel1.TabIndex = 1; this.linkLabel1.TabStop = true; this.linkLabel1.Text = "Class 1"; this.linkLabel1.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel1.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel1_LinkClicked); // // linkLabel2 // this.linkLabel2.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel2.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel2.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel2.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel2.Location = new System.Drawing.Point(467, 123); this.linkLabel2.Name = "linkLabel2"; this.linkLabel2.Size = new System.Drawing.Size(288, 32); this.linkLabel2.TabIndex = 2; this.linkLabel2.TabStop = true; this.linkLabel2.Text = "Class 2"; this.linkLabel2.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel2.VisitedLinkColor = System.Drawing.Color.Navy; this.linkLabel2.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel2_LinkClicked); // // linkLabel3 // this.linkLabel3.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel3.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel3.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel3.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel3.Location = new System.Drawing.Point(41, 311); this.linkLabel3.Name = "linkLabel3"; this.linkLabel3.Size = new System.Drawing.Size(288, 32); this.linkLabel3.TabIndex = 3; this.linkLabel3.TabStop = true; this.linkLabel3.Text = "Class 3"; this.linkLabel3.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel3.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel3_LinkClicked); // // linkLabel4 // this.linkLabel4.BackColor = System.Drawing.SystemColors.ActiveCaption; this.linkLabel4.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.linkLabel4.Font = new System.Drawing.Font("Times New Roman", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.linkLabel4.LinkBehavior = System.Windows.Forms.LinkBehavior.HoverUnderline; this.linkLabel4.Location = new System.Drawing.Point(467, 311); this.linkLabel4.Name = "linkLabel4"; this.linkLabel4.Size = new System.Drawing.Size(288, 32); this.linkLabel4.TabIndex = 4; this.linkLabel4.TabStop = true; this.linkLabel4.Text = "Class 4"; this.linkLabel4.TextAlign = System.Drawing.ContentAlignment.MiddleCenter; this.linkLabel4.LinkClicked += new System.Windows.Forms.LinkLabelLinkClickedEventHandler(this.linkLabel4_LinkClicked); // // button1 // this.button1.BackColor = System.Drawing.SystemColors.ActiveCaptionText; this.button1.FlatAppearance.BorderColor = System.Drawing.Color.FromArgb(((int)(((byte)(0)))), ((int)(((byte)(0)))), ((int)(((byte)(64))))); this.button1.FlatStyle = System.Windows.Forms.FlatStyle.Popup; this.button1.Font = new System.Drawing.Font("Pristina", 12F, System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.button1.ForeColor = System.Drawing.SystemColors.ActiveCaption; this.button1.ImageAlign = System.Drawing.ContentAlignment.TopCenter; this.button1.Location = new System.Drawing.Point(358, 206); this.button1.Name = "button1"; this.button1.Size = new System.Drawing.Size(101, 25); this.button1.TabIndex = 5; this.button1.Text = "Go Back"; this.button1.UseVisualStyleBackColor = false; this.button1.Click += new System.EventHandler(this.button1_Click); // // YOURCLASSSCHEDULE // this.AutoScaleBaseSize = new System.Drawing.Size(6, 15); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(790, 482); this.Controls.Add(this.button1); this.Controls.Add(this.linkLabel4); this.Controls.Add(this.linkLabel3); this.Controls.Add(this.linkLabel2); this.Controls.Add(this.linkLabel1); this.Font = new System.Drawing.Font("OldDreadfulNo7 BT", 8.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.Name = "YOURCLASSSCHEDULE"; this.Text = "Your Classes"; this.Load += new System.EventHandler(this.Form2_Load); this.ResumeLayout(false); } #endregion public void Form2_Load(object sender, System.EventArgs e) { // if (text == "900456317") // { //} } public void linkLabel1_LinkClicked(object sender, System.Windows.Forms.LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel2_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel3_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void linkLabel4_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e) { System.Diagnostics.Process.Start("http://www.georgiasouthern.edu/map/"); } private void button1_Click(object sender, EventArgs e) { Form1 form1 = new Form1(); form1.Show(); this.Hide(); } } }

    Read the article

  • Running a custom VirtualPathProvider with a PreCompiled website

    - by epilog
    Hi, currently I have a custom VirtualPathProvider in a Asp.net MVC web application. This VirtualPathProvider checks the Area from the route "/{Area}/{Controller}/..." and uses the NameSpace.{Area}.Main.dll module to return the views that are contained in that assembly as Embedded Resources. This works great and I don't have to deploy any ascx, js, css files. Now my problem is this: I would like to precompile the aspx and ascx files in the assembly and instead of having the views as embedded resources I would have the view class with all the Response.Write and dings and dongs. I can precompile the views using the aspnet_compiler but I keep getting an error when ever the ViewEngine tries to find the view and fails. My main goal is to have a way for the first time usage of a certain view/usercontrol would be faster and don't wait for the compilation to happen. This is a requirement since the application could be grouped into plugins and this plugins be deployed into the Bin directory. Any thoughts? With best regards Carlos Sobrinho

    Read the article

  • AS3 Font embedding problem in ComboBox on a loaded movie clip

    - by Arafat
    Hi all, I have three movie clips, say, LoaderMC, ChildMC1, and ChildMC2. ChildMC1 has TLFTextfields in it with embedded fonts. ChildMC2 has both TLFTextfields as well as combo boxes.(with embedded fonts) When I compile those movieclips separately, I can view the combo box texts without any problem. If I load the ChildMC1 and ChildMC2 into the LoaderMC, the texts doesn't appear at all on both TLFtextfields and Combo Boxes. I tried embedding the fonts in the LoaderMC, then, TLFTextfields was able to show the texts but still the ComboBoxes couldn't display the text. If I don't embed the fonts in the combo box, I can able to view the texts. What could be the problem? I read an article which says, "No one has completely understood the font embedding in flash AS3, we just have to do trial and error, to get it done" I don't know how far it is true, but in my case it seems, I should agree! Please help me...

    Read the article

  • How to recover data files from xampp-windows to xampp-linux after crash?

    - by David Buehler
    My Windows box died after I developed a database in xampp on it; fortunately I have a backup of the entire F:/TestWeb/Xampp partition. Unfortunately, I did not do an Export (nor dump) of the "Lws2" database before the crash. I have replaced the defunct machine with one running Mint7 (based on Ubuntu 9.04 "Jaunty Jackalope") and installed xampp-linux into the /opt partition, so the new xampp now runs fine in /opt/lampp, and says all the elements are secured by passwords (which I just assigned during this installation.) I assumed that Xamp-Windows installed in November would migrate easily to xampp-linux installed iin February -- a bad assumption. It apparently would have been simple if I had known enough to do an Export or a Dump before the crash, but.... The backup was done to a Network Attached Storage drive, which is formatted as "vfat" so the backup does not carry with it any valid ownership permissions from MySql on NTFS. I now see from my backup that the old data resided in \TestWeb\Xampp\Mysql\Data\Lws2\ and consists of 7 ".frm" files which define my tables. The actual data -- I suppose a ".sql" file or files -- has disappeared, and I am resigning myself to two days of retyping it. But I do not wish to do the table layouts all over again. So I copied Data tree to /opt/lampp/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/Lws2 -- PhpMyAdmin does not see it. So I copied Data tree to /opt/lampp/var/mysql/Data -- PhpMyAdmin does not see it. So I copied Lws2 tree to /opt/lampp/var/mysql/Lws2 -- PhpMyAdmin does not see it. So I adjusted all the permissions to stop saying owner "nobody" to owner "root" and gave full permissions to all groups and to all others, with permissions percolating down, in all 4 trees. You guessed it -- PhpMyAdmin does not see any database named Lws2, only its 4 default ones. I double-checked the permissions and rebooted Linux and repeated the tests. At some point in that process I did see PhpMyAdmin showing "lws2(7)" but when I clicked on it I saw a "no table found" message. I have not been able to recreate that experience. Apparently there are some setup files for MySql and for PhpMyAdmin which need to be set up by running a wizard or two or by editing the files directly. I grepped the TestWeb tree and found an old "ldir = "C:TestWeb\Xampp\MySql\" and a "DataDir = C:TestWeb\Xampp\MySql\" in a .php file and in a .bat file, but I cannot find the corresponding config file names on the /opt partition/ -- so it looks as if these wizards have not been run to create them. What config files files does Linux use to setup MySql config files for PhpMyAdmin? What wizards do I need to run to point the MySql engine and the PhpMyAdmin at the folder /opt/lampp/data/ with its lws2 folder inside it? Or which files do I need to edit, with a sample of what it normally says under Linux? Incidentally, I remember I converted from MyISAM with its .MYD and .MYI files to InnoDB after entering only a small amount of the data -- and I do not know what file types to look for -- perhaps my data is still there but under another guise or in another place? Is it something as simple as linux needing to see "/data/" instead of /Data? I will check that out while waiting for a response. If anyone can point me to documentation that discusses this level of detail -- I will read it avidly! In any case, thanks for any clarification you can give on this thorny problem. wizdum

    Read the article

  • What some good books on software testing/quality?

    - by mjh2007
    I'm looking for a good book on software quality. It would be helpful if the book covered: The software development process (requirements, design, coding, testing, maintenance) Testing roles (who performs each step in the process) Testing methods (white box and black box) Testing levels (unit testing, integration testing, etc) Testing process (Agile, waterfall, spiral) Testing tools (simulators, fixtures, and reporting software) Testing of embedded systems The goal here is to find an easy to read book that summarizes the best practices for ensuring software quality in an embedded system. It seems most texts cover the testing of application software where it is simpler to generate automated test cases or run a debugger. A book that provided solutions for improving quality in a system where the tests must be performed manually and therefore minimized would be ideal.

    Read the article

  • CF Framework Targeting.

    - by En
    Hi if a smart device project is set to target CF 2.0, Windoes CE 5.0. Should this same application run on Windows Mobile 6 with CF 3.5 installed? I was able to install it (the CF 2 app), but when running receive an error stating that the assemblies could not be loaded and that CF might not be installed. This has led me to belive that smart device projects wil ONLY work on the framework they target, not any versions lower or greater. Any help would be greatly appreciated.

    Read the article

  • Strange behaviour with Microsoft.WindowsCE.Forms

    - by Mohammadreza
    I have a Windows Mobile application in which I want to check the device orientation. Therefore I wrote the following property in one of my forms: internal static Microsoft.WindowsCE.Forms.ScreenOrientation DeviceOriginalOrientation { get; private set; } The strange thing is that after that whenever I open a UserControl, the designer shows this warning even if that UserControl doesn't use the property: Could not load file or assembly 'Microsoft.WindowsCE.Forms, Version=3.5.0.0, Culture=neutral, PublicKeyToken=969db8053d3322ac' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) Commenting the above property will dismiss the warning and shows the user control again. The application is built successfully and runs without any problems in both cases. Does anybody know why this happens and how can I fix it?

    Read the article

  • How can I embed firefox in a GUI application?

    - by PeniWize
    Has anyone ever embedded the firefox web browser technology in their own [unmanaged] C/C++ GUI application in the same way that IE can be embedded as a COM object? (I would like to do this on Linux, not Windows). Are there "better" alternatives to firefox? I'm open to anything as long as I can use it with non-GPL code. My needs are fairly basic; I only need fundamental HTML parsing and display of static local files, but I'd take advantage of more sophisticated technology, if I can get it. I'd like to be able to use JavaScript, but I can get by without it.

    Read the article

  • Compressing three individual jpeg pics containing temporal redundancy?

    - by michael
    I am interfacing and embedded device with a camera module that returns a single jpeg compressed frame each time I trigger it. I would like to take three successive shots (approx 1 frame per 1/4 second) and further compress the images into a single file. The assumption here is that there is a lot of temporal redundancy, therefore lots of room for more compression across the three frames (compared to sending three separate jpeg images). I will be implementing the solution on an embedded device in C without any libraries and no OS. The camera will be taking pics in an area with very little movement (no visitors or screens in the background, maybe a tree with swaying branches), so I think my assumption about redundancy is pretty solid. When the file is finally viewed on a pc/mac, I don't mind having to write something to extract the three frames (so it can be a nonstandard cluge) So I guess the actual question is: What is the best way to compress these three images together given the fact that they are already in JPEG format (it is a possibly to convert back to a raw image, but if i dont have too...)

    Read the article

  • What are some good books on software testing/quality?

    - by mjh2007
    I'm looking for a good book on software quality. It would be helpful if the book covered: The software development process (requirements, design, coding, testing, maintenance) Testing roles (who performs each step in the process) Testing methods (white box and black box) Testing levels (unit testing, integration testing, etc) Testing process (Agile, waterfall, spiral) Testing tools (simulators, fixtures, and reporting software) Testing of embedded systems The goal here is to find an easy to read book that summarizes the best practices for ensuring software quality in an embedded system. It seems most texts cover the testing of application software where it is simpler to generate automated test cases or run a debugger. A book that provided solutions for improving quality in a system where the tests must be performed manually and therefore minimized would be ideal.

    Read the article

  • Problem with launching JAGUAR in R

    - by Gerry
    Windows XP, R 2.11.1, Java JRE6 I just installed the Jaguar package. From an R console, I can do this: > library(JGR) Loading required package: rJava Loading required package: JavaGD Loading required package: iplots Please use the corresponding JGR launcher to start JGR. Run JGR() for details. You can also use JGR(update=TRUE) to update JGR. and so JGR appears to be correctly installed. JGR() yields On Windows JGR must be started using the JGR.exe launcher. Please visit http://www.rosuda.org/JGR/ to download it. > I'm not sure how to run Jaguar - I know I have to run jgr.exe - but should R be already open? If so, should the JGR library be already loaded? I've tried all of these, and what seems to happen regardless is a console window opens briefly, then disappears. I've run jrg --debug, with no apparent error message: (same file regardless of choice made above). What should I be doing? Thanks! System: Version 5.1 (build 2600), platform 2 [Service Pack 3] JGR loader version 1.61 (build Jul 23 2008) parseParams> 1 parameters parsed. parseParams par 10> "--debug" > rhome="C:\Program Files\R\R-2.11.1" > srhome="C:\PROGRA~1\R\R-211~1.1" getPkgVersion(JGR): 010702 getPkgVersion(rJava): 000805 getPkgVersion(JavaGD): 000503 getPkgVersion(iplots): 010103 Loading preferences from "C:\Documents and Settings\gblais\.JGRprefsrc" > javakey="Software\JavaSoft\Java Runtime Environment\1.6" > javah="C:\Program Files\Java\jre6" > tp="C:\Perl\site\bin;C:\Perl\bin;C:\PHP\;C:\Program Files\MiKTeX 2.8\miktex\bin;C:\Python26\Lib\site-packages\PyQt4;C:\Program Files\Tcl\bin;C:\oracle\product\10.2.0\client_2\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;c:\belfry;c:\belfry\usr\local\wbin;C:\WINDOWS;C:\WINDOWS\System32;C:\WINDOWS\System32\WBEM;c:\Program Files\QuickTime\QTSystem\;C:\Program Files\SlikSvn\bin\;c:\progra~1\Microsoft Visual Studio 9.0\VC\bin\" Got RuntimeLib from registry, using "C:\Program Files\Java\jre6\bin\client;" PATH prefix. Java home: "C:\Program Files\Java\jre6" R home: "C:\Program Files\R\R-2.11.1" JAR files: "-Drjava.class.path=C:\PROGRA~1\R\R-211~1.1\library\rJava\jri\JRI.jar;C:\PROGRA~1\R\R-211~1.1\library\iplots\java\iplots.jar;C:\PROGRA~1\R\R-211~1.1\library\JGR\java\JGR.jar;C:\PROGRA~1\R\R-211~1.1\etc\classes;C:\PROGRA~1\R\R-211~1.1\etc\classes.jar" desired PATH: "C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin;C:\Program Files\R\R-2.11.1\bin;C:\PROGRA~1\R\R-211~1.1\library\rJava\jri;C:\Perl\site\bin;C:\Perl\bin;C:\PHP\;C:\Program Files\MiKTeX 2.8\miktex\bin;C:\Python26\Lib\site-packages\PyQt4;C:\Program Files\Tcl\bin;C:\oracle\product\10.2.0\client_2\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;c:\belfry;c:\belfry\usr\local\wbin;C:\WINDOWS;C:\WINDOWS\System32;C:\WINDOWS\System32\WBEM;c:\Program Files\QuickTime\QTSystem\;C:\Program Files\SlikSvn\bin\;c:\progra~1\Microsoft Visual Studio 9.0\VC\bin\" actual PATH: "C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin;C:\Program Files\R\R-2.11.1\bin;C:\PROGRA~1\R\R-211~1.1\library\rJava\jri;C:\Perl\site\bin;C:\Perl\bin;C:\PHP\;C:\Program Files\MiKTeX 2.8\miktex\bin;C:\Python26\Lib\site-packages\PyQt4;C:\Program Files\Tcl\bin;C:\oracle\product\10.2.0\client_2\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;c:\belfry;c:\belfry\usr\local\wbin;C:\WINDOWS;C:\WINDOWS\System32;C:\WINDOWS\System32\WBEM;c:\Program Files\QuickTime\QTSystem\;C:\Program Files\SlikSvn\bin\;c:\progra~1\Microsoft Visual Studio 9.0\VC\bin\" getenv PATH: "C:\Perl\site\bin;C:\Perl\bin;C:\PHP\;C:\Program Files\MiKTeX 2.8\miktex\bin;C:\Python26\Lib\site-packages\PyQt4;C:\Program Files\Tcl\bin;C:\oracle\product\10.2.0\client_2\BIN;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;c:\belfry;c:\belfry\usr\local\wbin;C:\WINDOWS;C:\WINDOWS\System32;C:\WINDOWS\System32\WBEM;c:\Program Files\QuickTime\QTSystem\;C:\Program Files\SlikSvn\bin\;c:\progra~1\Microsoft Visual Studio 9.0\VC\bin\" argv[0]:C:\PROGRA~1\Java\jre6\bin\java.exe argv[1]:-Drjava.class.path=C:\PROGRA~1\R\R-211~1.1\library\rJava\jri\JRI.jar;C:\PROGRA~1\R\R-211~1.1\library\iplots\java\iplots.jar;C:\PROGRA~1\R\R-211~1.1\library\JGR\java\JGR.jar;C:\PROGRA~1\R\R-211~1.1\etc\classes;C:\PROGRA~1\R\R-211~1.1\etc\classes.jar argv[2]:-Xmx512m argv[3]:-cp argv[4]:C:\PROGRA~1\R\R-211~1.1\library\rJava\java\boot argv[5]:-Drjava.path=C:\PROGRA~1\R\R-211~1.1\library\rJava argv[6]:-Dmain.class=org.rosuda.JGR.JGR argv[7]:-Djgr.load.pkgs=yes argv[8]:-Djgr.loader.ver=1.61 argv[9]:RJavaClassLoader argv[10]:--debug

    Read the article

  • "Service Unavailable" when browsing to static HTML page in non-application IIS website on Windows 2003 (possibly SharePoint WSS 2.0 related?)

    - by Jordan Rieger
    Background: My client has an old Pentium III Windows 2003 server whose 16/36 GB disks are dying. On it he has a database-driven web site and email application that needs further customization by a developer (me). First we need to get it working on the new server. The original developer is no longer available to provide a system setup guide. So my client got a tech who imaged the old drives over to the new server and managed to get it booting. But the IIS-driven site no longer works. In fact it seems that IIS itself does not work. Problem: Service Unavailable when attempting to browse from the server itself to the URL for a local Web Site called test which I setup in IIS to serve a single static index.htm file. This I did to isolate the problem, and eliminate the client's application from the equation. The site is setup on port 80 with the host header "test.myclientsdomain.com", and I used the etc\hosts file to point that host at the local IP. I know the host entry took effect because I can ping it. When doing an iisreset, I get: Attempting start... Restart attempt failed. IIS Admin Service or a service dependent on IIS Admin is not active. It most likely failed to start, which may mean that it's disabled. Despite this message, the services all stay in the Started state. The only relevant System event logs I found are: Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1002 Date: 11/4/2012 Time: 11:04:47 PM User: N/A Computer: ALPHA1 Description: Application pool 'DefaultAppPool' is being automatically disabled due to a series of failures in the process(es) serving that application pool. Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1039 Date: 11/4/2012 Time: 11:13:12 PM User: N/A Computer: ALPHA1 Description: A process serving application pool 'DefaultAppPool' reported a failure. The process id was '5636'. The data field contains the error number. Data: 0000: 7e 00 07 80 ~.. And one Application event log: Event Type: Error Event Source: Windows SharePoint Services 2.0 Event Category: None Event ID: 1000 Date: 11/4/2012 Time: 11:34:04 PM User: N/A Computer: ALPHA1 Description: #50070: Unable to connect to the database STS_Config on ALPHA2\SharePoint. Check the database connection information and make sure that the database server is running. That last log tells me that the tech may have initially tried to have both the old and the new server running, by renaming the new server from ALPHA1 to ALPHA2. And perhaps SharePoint grabbed onto that change, and now can't tell that the machine name has been switched back to the old ALPHA1. But why would SharePoint interfere with a static IIS web site serving a single HTML file? The test site is not even within an Application pool (I clicked the Remove button.) What I have tried/eliminated: No relevant services seem to be disabled: IIS Admin, WWW Publishing, Sharepoint Timer Giving Full Control to All Users/Everyone on the c:\inetpub\test folder serving my test site. I can connect to and query the local SharePoint config database (ALPHA1\SHAREPOINT\STS_CONFIG) from SSMS. But when I try to do stsadm -o setconfigdb -connect -databaseserver ALPHA1\SHAREPOINT it tells me The SharePoint admininstration port does not exist. Please use stsadm.exe to create it. And when I do that, using the port 9487 specified in the IIS SharePoint Admin site config, it tells me the port is already in use. Needless to say, simply browsing to the admin site gives me a similar error about being unable to reach the config database. I didn't want to go further down the SharePoint path as it may be completed unrelated to my IIS issue, and I don't even know yet if SharePoint is required for this application to work. The app itself is ASP.Net/C#/Silverlight and a little MS Word integration (maybe that's where the SharePoint stuff comes in.)

    Read the article

  • Visual Studio - how to create two projects using the same sources

    - by mack369
    My solution consists of 2 executable projects and a couple dlls. Project1 is a Smart Device Project, Project2 is a Windows Forms Project. Both projects use the same libraries, the reason of that is I want to test my libraries on PC before I deploy it on the device. The problem is that the DLL project type can be Smart Device Class Library or Class Library, not both. I cannot add a reference from SD project to WF and vice versa. I was able to add reference from SD project to a dll file (generated from Class Library project) instead of the project itself, but for some reason I got the message "cannot load XXX type from YYY assembly". It doesn't depend on my code, because when I created separate project for the same sources, everything was fine. The only solution I've found is to create 2 types of projects for each library, but I don't know how to make 2 projects based on the same sources.

    Read the article

  • How to know from a bash script if the user abruptly closes ssh session

    - by Figo
    I have a bash script that acts as the default shell for a user loging in trough ssh. It provides a menu with several options one of wich is sending a file using netcat. The netcat of the embedded linux I'm using lacks the -w option, so if the user closes the ssh connection without ever sending the file, the netcat command waits forever. I need to know if the user abruptly closes the connection so the script can kill the netcat command and exit gracefully. Things I've tried so far: Trapping the SIGHUP: it is not issued. The only signal issued i could find is SIGCONT, but I don't think it's reliable and portable. Playing with the -t option of the read command to detect a closed stdin: this would work if not for a silly bug in the embedded read command (only times out on the first invocation)

    Read the article

  • Insert takes too long, code optimization needed

    - by Pentium10
    I have some code I use to transfer a table1 values to another table2, they are sitting in different database. It's slow when I have 100.000 records. It takes forever to finish, 10+ minutes. (Windows Mobile smartphone) What can I do? cmd.CommandText = "insert into " + TableName + " select * from sync2." + TableName+""; cmd.ExecuteNonQuery(); EDIT The problem is not resolved. I am still after answers.

    Read the article

  • SSL_accept hangs... sometimes ( C, linux, openssl )

    - by zbigh
    I'm currently working on an embedded linux system. There are two crucial client applications on the system that connect to an external server ( on another embedded system, all written in C ). The two apps use different certificates. The ssl connection works... At least usually, but from time to time an error occures: the server hangs on SSL_accept() when accepting connection from one of the applications - the one using older certificates. Restarting the server application does not help, nor does restarting the client - the only way is to reboot the server system, unless I create a symbilic link to the new certificates used by the other app - only then will restarting the server app work. Never does the error occur when both applications use the same, new certificate. Could this happen due to some strange openssl cache or something like that?

    Read the article

  • How do I connect my Windows XP laptop to the internet?

    - by rubysiddhi
    Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

    Read the article

  • linux permission for windows mounted partition

    - by monucool
    I have installed windows 7 and linux opensuse in my laptop. In linux the windows is mounted under /windows/A OR B OR C OR D When ever i write or do a touch in any of this location it says permission denied The permission for /windows on running ls -l on root partition is as follows : drwxr-xr-x 1 root users 32768 Nov 12 11:00 Windows what should i do to get the permissions for writing or deleting a file?

    Read the article

  • Running Windows Phone Developers Tools CTP under VMWare Player - Yes you can! - But do you want to?

    - by Liam Westley
    This blog is the result of a quick investigation of running the Windows Phone Developer Tools CTP under VMWare Player.  In the release notes for Windows Phone Developer Tools CTP it mentions that it is not supported under VirtualPC or Hyper-V.  Some developers have policies where ‘no non-production code’ can be installed on their development workstation and so the only way they can use a CTP like this is in a virtual machine. The dilemma here is that the emulator for Windows Phone itself is a virtual machine and running a virtual machine within another virtual machine is normally frowned upon.  Even worse, previous Windows Mobile emulators detected they were in a virtual machine and refused to run.  Why VMWare? I selected VMWare as a possible solution as it is possible to run VMWare ESXi under VMWare Workstation by manually setting configuration options in the VMX configuration file so that it does not detect the presence of a virtual environment. I actually found that I could use VMWare Player (the free version, that can now create VM images) and that there was no need for any editing of the configuration file (I tried various switches, none of which made any difference to performance). So you can run the CTP under VMWare Player, that’s the good news. The bad news is that it is incredibly slow, bordering on unusable.  However, if it’s the only way you can use the CTP, at least this is an option. VMWare Player configuration I used the latest VMWare Player, 3.0, running under Windows x64 on my HP 6910p laptop with an Intel T7500 Dual Core CPU running at 2.2GHz, 4Gb of memory and using a separate drive for the virtual machines. I created a machine in VMWare Player with a single CPU, 1536 Mb memory and installed Windows 7 x64 from an ISO image.  I then performed a Windows Update, installed VMWare Tools, and finally the Windows Phone Developer Tools CTP After a few warnings about performance, I configured Windows 7 to run with Windows 7 Basic theme rather than use Aero (which is available under VMWare Player as it has a WDDM driver). Timings As a test I first launched Microsoft Visual Studio 2010 Express for Windows Phone, and created a default Windows Phone Application project.  I then clicked the run button, which starts the emulator and then loads the default application onto the emulator. For the second test I left the emulator running, stopped the default application, added a single button to change the page title and redeployed to the already running emulator by clicking the run button.   Test 1 (1st run) Test 2 (emulator already running)   VMWare Player 10 minutes  1 minute   Windows x64 native 1 minute  < 10 seconds   Conclusion You can run the Windows Phone Developer Tools CTP under VMWare Player, but it’s really, really slow and you would have to have very good reasons to try this approach. If you need to keep a development system free of non production code, and the two systems aren’t required to run simultaneously, then I’d consider a boot from VHD option.  Then you can completely isolate the Windows Phone Developer Tools CTP and development environment into a single VHD separate from your main development system.

    Read the article

  • What are some techniques to monitor multiple instances of a piece of software?

    - by Geo Ego
    It was recommended that I ask this question here by a member of StackOverflow. I have a piece of self-serve kiosk software that will be running at multiple sites. I'd like to monitor their status remotely. The kiosk application itself is pretty much finished. I am now in the process of creating a piece of software that will monitor all of the kiosks from a central location so that the customer can view particular details remotely (for instance, how many bills are in the acceptor's cash cartridge, what customer is currently logged in, etc.). Because I am in such an early stage of development, my options are quite open. I understand that I'm not giving very many qualifications, but I'd like to try to get a good variety of potential solutions. Some details: Kiosk software is a VB6 app running on Windows Embedded Monitoring software will be run on a modern desktop version of Windows (either XP, Vista, or 7) Database is SQL Server 2008 My initial idea was to develop a .NET app that would simply report the last database transaction for each kiosk at a set interval (say every second or so) but I'd really like for the kiosk software to report its status in real-time. I'm not exactly sure where to begin in terms of what modifications may need to be made to the kiosk software, and what the monitoring software will require. Links to articles on these topics would be most welcome.

    Read the article

  • How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

    - by jdt141
    I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

    Read the article

  • Python: how do I install SciPy on 64 bit Windows?

    - by Peter Mortensen
    How do I install SciPy on my system? Update 1: for the NumPy part (that SciPy depends on) there is actually an installer for 64 bit Windows: numpy-1.3.0.win-amd64-py2.6.msi (is direct download URL, 2310144 bytes). Running the SciPy superpack installer results in this message in a dialog box: "Cannot install. Python version 2.6 required, which was not found in the registry." I already have Python 2.6.2 installed (and a working Django installation in it), but I don't know about any Registry story. The registry entries seems to already exist: REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Python] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\Help] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\Help\Main Python Documentation] @="D:\\Python262\\Doc\\python262.chm" [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\InstallPath] @="D:\\Python262\\" [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\InstallPath\InstallGroup] @="Python 2.6" [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\Modules] [HKEY_LOCAL_MACHINE\SOFTWARE\Python\PythonCore\2.6\PythonPath] @="D:\\Python262\\Lib;D:\\Python262\\DLLs;D:\\Python262\\Lib\\lib-tk" What I have done so far: Step 1 Downloaded the NumPy superpack installer numpy-1.3.0rc2-win32-superpack-python2.6.exe (direct download URL, 4782592 bytes). Running this installer resulted in the same message, "Cannot install. Python version 2.6 required, which was not found in the registry.". Update: there is actually an installer for NumPy that works - see beginning of the question. Step 2 Tried to install NumPy in another way. Downloaded the zip package numpy-1.3.0rc2.zip (direct download URL, 2404011 bytes), extracted the zip file in a normal way to a temporary directory, D:\temp7\numpy-1.3.0rc2 (where setup.py and README.txt is). I then opened a command line window and: d: cd D:\temp7\numpy-1.3.0rc2 setup.py install This ran for a long time and also included use of cl.exe (part of Visual Studio). Here is a nearly 5000 lines long transcript (230 KB). This seemed to work. I can now do this in Python: import numpy as np np.random.random(10) with this result: array([ 0.35667511, 0.56099423, 0.38423629, 0.09733172, 0.81560421, 0.18813222, 0.10566666, 0.84968066, 0.79472597, 0.30997724]) Step 3 Downloaded the SciPy superpack installer, scipy-0.7.1rc3- win32-superpack-python2.6.exe (direct download URL, 45597175 bytes). Running this installer resulted in the message listed in the beginning Step 4 Tried to install SciPy in another way. Downloaded the zip package scipy-0.7.1rc3.zip (direct download URL, 5506562 bytes), extracted the zip file in a normal way to a temporary directory, D:\temp7\scipy-0.7.1 (where setup.py and README.txt is). I then opened a command line window and: d: cd D:\temp7\scipy-0.7.1 setup.py install This did not achieve much - here is a transcript (about 95 lines). And it fails: >>> import scipy as sp2 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named scipy Platform: Python 2.6.2 installed in directory D:\Python262, Windows XP 64 bit SP2, 8 GB RAM, Visual Studio 2008 Professional Edition installed. The startup screen of the installed Python is: Python 2.6.2 (r262:71605, Apr 14 2009, 22:46:50) [MSC v.1500 64 bit (AMD64)] on win32 Type "help", "copyright", "credits" or "license" for more information. >>> Value of PATH, result from SET in a command line window: Path=D:\Perl64\site\bin;D:\Perl64\bin;C:\Program Files (x86)\PC Connectivity Solution\;D:\Perl\site\bin;D:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;d:\Program Files (x86)\WinSCP\;D:\MassLynx\;D:\Program Files (x86)\Analyst\bin;d:\Python262;d:\Python262\Scripts;D:\Program Files (x86)\TortoiseSVN\bin;D:\Program Files\TortoiseSVN\bin;C:\WINDOWS\system32\WindowsPowerShell\v1.0;D:\Program Files (x86)\IDM Computer Solutions\UltraEdit\

    Read the article

< Previous Page | 586 587 588 589 590 591 592 593 594 595 596 597  | Next Page >