Search Results

Search found 49089 results on 1964 pages for 'global address list'.

Page 591/1964 | < Previous Page | 587 588 589 590 591 592 593 594 595 596 597 598  | Next Page >

• network routing between mac & virtual XP

  - by Kevin

  Hi - I have a max laptop running XP inside VirtualBox. The network is setup to be a "Bridged Adapter" so that the IPs for both the host & guest OS's are assigned by my wireless routed. My guest XP has Nortel VPN connecting to corporate lan. When this is connected, I want to allow my host Mac OS to access the corporate network. But I'm struggling. Without Nortel VPN running, I can change routing on the mac so all traffic is sent via the guest XP - this works. But once I activate the VPN, this no longer works. If I try to change the routing on mac to run through the IP address assigned to the Nortel adapter, I get a "Network is unreachable" error. Below is the output from ipconfig /all on the guest XP OS. I'm beginning to believe that what I want to do is not possible because of the way Nortel secure the VPN - but before I give up I thought I'd post the problem here. Thanks, Kevin z:\eclipseworkspace\RESMobileSuite\trunk>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : zzzz-3177b42dd0 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : zzzz.zzz Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapter Physical Address. . . . . . . . . : 08-00-XX-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : 30 April 2010 12:22:02 Lease Expires . . . . . . . . . . : 01 May 2010 12:22:02 Ethernet adapter {8EB7A442-9683-45FB-A602-56110A4B3434}: Connection-specific DNS Suffix . : zzzz.zz Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-YY-YY-YY-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XXX.4.52.62 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.4.52.62 DNS Servers . . . . . . . . . . . : XXX.6.21.36 XXX.6.21.100

  Read the article

• route http and ssh traffic normally, everything else via vpn tunnel

  - by Normadize

  I've read quite a bit and am close, I feel, and I'm pulling my hair out ... please help! I have an OpenVPN cliend whose server sets local routes and also changes the default gw (I know I can prevent that with --route-nopull). I'd like to have all outgoing http and ssh traffic via the local gw, and everything else via the vpn. Local IP is 192.168.1.6/24, gw 192.168.1.1. OpenVPN local IP is 10.102.1.6/32, gw 192.168.1.5 OpenVPN server is at {OPENVPN_SERVER_IP} Here's the route table after openvpn connection: # ip route show table main 0.0.0.0/1 via 10.102.1.5 dev tun0 default via 192.168.1.1 dev eth0 proto static 10.102.1.1 via 10.102.1.5 dev tun0 10.102.1.5 dev tun0 proto kernel scope link src 10.102.1.6 {OPENVPN_SERVER_IP} via 192.168.1.1 dev eth0 128.0.0.0/1 via 10.102.1.5 dev tun0 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 1 This makes all packets go via to the VPN tunnel except those destined for 192.168.1.0/24. Doing wget -qO- http://echoip.org shows the vpn server's address, as expected, the packets have 10.102.1.6 as source address (the vpn local ip), and are routed via tun0 ... as reported by tcpdump -i tun0 (tcpdump -i eth0 sees none of this traffic). What I tried was: create a 2nd routing table holding the 192.168.1.6/24 routing info (copied from the main table above) add an iptables -t mangle -I PREROUTING rule to mark packets destined for port 80 add an ip rule to match on the mangled packet and point it to the 2nd routing table add an ip rule for to 192.168.1.6 and from 192.168.1.6 to point to the 2nd routing table (though this is superfluous) changed the ipv4 filter validation to none in net.ipv4.conf.tun0.rp_filter=0 and net.ipv4.conf.eth0.rp_filter=0 I also tried an iptables mangle output rule, iptables nat prerouting rule. It still fails and I'm not sure what I'm missing: iptables mangle prerouting: packet still goes via vpn iptables mangle output: packet times out Is it not the case that to achieve what I want, then when doing wget http://echoip.org I should change the packet's source address to 192.168.1.6 before routing it off? But if I do that, the response from the http server would be routed back to 192.168.1.6 and wget would not see it as it is still bound to tun0 (the vpn interface)? Can a kind soul please help? What commands would you execute after the openvpn connects to achieve what I want? Looking forward to hair regrowth ...

  Read the article

• Reformatting and version control

  - by l0b0

  Code formatting matters. Even indentation matters. And consistency is more important than minor improvements. But projects usually don't have a clear, complete, verifiable and enforced style guide from day 1, and major improvements may arrive any day. Maybe you find that SELECT id, name, address FROM persons JOIN addresses ON persons.id = addresses.person_id; could be better written as / is better written than SELECT persons.id, persons.name, addresses.address FROM persons JOIN addresses ON persons.id = addresses.person_id; while working on adding more columns to the query. Maybe this is the most complex of all four queries in your code, or a trivial query among thousands. No matter how difficult the transition, you decide it's worth it. But how do you track code changes across major formatting changes? You could just give up and say "this is the point where we start again", or you could reformat all queries in the entire repository history. If you're using a distributed version control system like Git you can revert to the first commit ever, and reformat your way from there to the current state. But it's a lot of work, and everyone else would have to pause work (or be prepared for the mother of all merges) while it's going on. Is there a better way to change history which gives the best of all results: Same style in all commits Minimal merge work ? To clarify, this is not about best practices when starting the project, but rather what should be done when a large refactoring has been deemed a Good Thing™ but you still want a traceable history? Never rewriting history is great if it's the only way to ensure that your versions always work the same, but what about the developer benefits of a clean rewrite? Especially if you have ways (tests, syntax definitions or an identical binary after compilation) to ensure that the rewritten version works exactly the same way as the original?

  Read the article

• How to specialize a c++ variadic template?

  - by Serge

  I'm trying to understand c++ variadic templates. I'm not much aware of the correct language to use to explain what I'd like to achieve, so it might be simpler if I provide a bit of code which illustrate what I'd like to achieve. #include <iostream> #include <string> using namespace std; template<int ...A> class TestTemplate1 { public: string getString() { return "Normal"; } }; template<int T, int ...A> string TestTemplate1<2, A...>::getString() { return "Specialized"; } template<typename ...A> class TestTemplate2 { }; int main() { TestTemplate1<1, 2, 3, 4> t1_1; TestTemplate1<1, 2> t1_2; TestTemplate1<> t1_3; TestTemplate1<2> t1_4; TestTemplate2<> t2_1; TestTemplate2<int, double> t2_2; cout << t1_1.getString() << endl; cout << t1_2.getString() << endl; cout << t1_3.getString() << endl; cout << t1_4.getString() << endl; } This throws several errors. error C2333: 'TestTemplate1<::getString' : error in function declaration; skipping function body error C2333: 'TestTemplate1<1,2,3,4::getString' : error in function declaration; skipping function body error C2333: 'TestTemplate1<1,2::getString' : error in function declaration; skipping function body error C2333: 'TestTemplate1<2::getString' : error in function declaration; skipping function body error C2977: 'TestTemplate1' : too many template arguments error C2995: 'std::string TestTemplate1::getString(void)' : function template has already been defined error C3860: template argument list following class template name must list parameters in the order used in template parameter list How can I have a specialized behavior for every TestTemplate1<2, ...> instances like t1_4?

  Read the article

• "Time Control" in a 2d Platformer

  - by Woody Zantzinger

  I am making a 2d platformer where the player can press a button, and restart the level, only their previous character will also run the level at the same time, like they are traveling back in time. I know other games have done this before, and the way I have thought of doing it is to make the game character have a set of actions (Idle, Jumping, Walking Left etc.) and then detect changes in those actions and log them into a list along with the game time. So then when I need the character to run the level again on its own, I can just go through the list changing its actions at the right time. Is this the best way to do it? Does anyone have any experience in this? Thanks.

  Read the article

• Cisco Aironet 1200 Series AP Configuration

  - by nonterrorist

  I am attempting to configure a new CISCO Aironet 1200 Series Access Point to have a fixed IP. I have been searching online and I have come to the conclusion that the default IP address of this device is 10.0.0.1. These are the steps I have taken: My machine is plugged directly into the Ethernet port (not the Console port) of the AP. My Ethernet adapter is set to 10.0.0.2. I have reset the AP by holding the Mode button while powering up the device. The issue remains that I can not access 10.0.0.1 through the web, nor can I ping that address.

  Read the article

• Is the BCM4306 wireless card ipv6 capable?

  - by horroricane

  I've been trying to connect with ipv6 enabled networks with my Broadcom Wireless card under Ubuntu 12.04. The wireless card model is BCM4306. $lspci $Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03) $Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) I have been unsuccesful to connect through an ipv6 address, but I can still connect to a network when assigned an ipv4 address. While searching for an answer or a solution, I know the kernel can handle dealing with ipv6. So, what's left to question should be the hardware handling the connection. Unfortunately nothing comes up when I specifically try to search for information on BCM4306 ipv6 capabilities. I just tried using a wired connection to establish an ipv6 only connection to the network I'm on right now, but I got the same behavior of constant disconnections. Maybe it's not the hardware? I don't know.. I don't want to disable ipv6 on my machine as relevant networks I'll be connecting to will be using it exclusively, but I'm not sure what is wrong and which parts should I replace/fix to get this working.. Could someone please point me in a fruitful direction to get ipv6 working under Ubuntu 12.04?

  Read the article

• How can I read a portion of one Minecraft world file and write it into another?

  - by RapierMother

  I'm looking to read block data from one Minecraft world and write the data into certain places in another. I have a Minecraft world, let's say "TemplateWorld", and a 2D list of Point objects. I'm developing an application that should use the x and y values of these Points as x and z reference coordinates from which to read constant-sized areas of blocks from the TemplateWorld. It should then write these blocks into another Minecraft world at constant y coordinates, with x & z coordinates determined based on each Point's index in the 2D list. The issue is that, while I've found a decent amount of information online regarding Minecraft world formats, I haven't found what I really need: more of a breakdown by hex address of where/what everything is. For example, I could have the TemplateWorld actually be a .schematic file rather than a world; I just need to be able to read the bytes of the file, know that the actual block data starts always at a certain address (or after a certain instance of FF, etc.), and how it's stored. Once I know that, it's easy as pie to just read the bytes and store them.

  Read the article

• FreeBSD's VPN & Mac OS X IPSecuritas

  - by alexus

  I need to be able to VPN in to my FreeBSD server from my Mac using IPSecuritas. I was wondering if anyone ever done something, I'm reading VPN over IPsec but that mainly covers if you had 2 nodes with 2 public IP address. My endpoint in IPSecuritas configured with MODE_CFG enabled so it'll have the other node to query my address from it's coming from. SSH is out of question, this is not a VPN solution, people who'd end up using VPN wouldn't know what to do, so I need very simple VPN the one that you get to use almost anywhere, you have a client and you have server, client makes a connection to server and boom, you in...

  Read the article

• Farseer Physics: Ways to create a Body?

  - by EdgarT

  I want to create something similar to this using farsser and Kinect: https://vimeo.com/33500649 This is my implementation until now: http://www.youtube.com/watch?v=GlIvJRhco4U I have the outline vertices and the triangulation of the user. And following the Texture to Polygonmsample i used this line to create the shape, where farseerObject is a list of vertices of the triangles: _compound = BodyFactory.CreateCompoundPolygon(World, farseerObject, 1f, BodyType.Dynamic); But I have to update the body each frame (like 30 fps) and this is very slow. I get just 2 or 3 fps. There's another (faster) way to create the Body from a list of triangles or the contour vertices?

  Read the article

• ADD ROUTE command in windows 2008R2

  - by Mehrdad Kamelzadeh

  I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

  Read the article

• Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• Motherboard memory question

  - by JERiv

  I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

  Read the article

• OpenJDK 6 B26 Available

  - by user9158633

  On September 21, 2012 the source bundle for OpenJDK 6 b26 was published at http://download.java.net/openjdk/jdk6/. The main changes in b26 are the latest round of security updates and a number of other fixes. For more information see the detailed list of all the changes in OpenJDK 6 B26. Test Results: All the jdk regression tests run with  make test passed on linux. cd jdk6 make make test For the current list of excluded tests see  jdk6/jdk/test/ProblemList.txt file:  ProblemList.html in B26 |  Latest ProblemList.txt (in the tip revision). Special thanks to Kelly O'Hair for his contributions to the project and Dave Katleman for his Release Engineering work.

  Read the article

• Database structure for various items

  - by XGouchet

  I'm building a sqlite database for an android app which will hold a list of items, each of which have different characteristics. Some of the characteristics are available for all objects, some are only relevant for a subset of objects. For example, all my items have a name, a description, an image. Some items will also have an expiration date, others wont. Some will have a size, some wont. Etc... How should I build my Database, as I don't know how many characteristics may be added in the future, and knowing I should be able to filter the list by any characteristic ?

  Read the article

• Ubuntu 12.04 host lookups extremely slow

  - by tubaguy50035

  I'm having issues with one of my servers taking a long time to look up host names. This is an Ubuntu 12.04 box, so I've tried following the new resolvconf directives. In my /etc/network/interfaces file, I defined my name servers like this: auto eth0 iface eth0 inet static address someaddress netmask 255.255.255.0 gateway 198.58.103.1 dns-nameservers 74.14.179.5 72.14.188.5 In my /etc/resolv.conf, I see these name servers, like this: # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 74.14.179.5 nameserver 72.14.188.5 On another box, I edited the resolv.conf directly as directed by my hosts' setup help files. It looks like this: domain members.linode.com search members.linode.com nameserver 72.14.179.5 nameserver 72.14.188.5 options rotate This second box has no issues with host name look ups and responds quite quickly. Could not having the domain and search directives make my look ups slow? By slow, I mean it's taking anywhere from 5 to 15 seconds to find the IP address of a host.

  Read the article

• OS X server VPN local ip

  - by gbrandt

  Hi all, I have 10.6.2 server on the internet. I want to vpn into it to get access. I start VPN and it gives me an address in the range I have set 192.168.2.100-192.168.2.105. However the server itself does not have a local ip of 192.168.2.x so I cannot ping it or ssh into it or anything. The machine VPNing gets an ifconfig entry that looks like this: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 70.72.xxx.xxx netmask 0xffffff00 Where I think it should get: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 192.168.2.1 netmask 0xffffff00 I can't find anywhere to set the local vpn IP address. And I can't find a pptpd.conf file either. Any help is appreciated.

  Read the article

• Why would one bother marking up properly and semantically?

  - by Madara Uchiha

  Note that I (try) to mark up as semantically as possible because I like they way it looks and feels, but not because I'm aware of any other stunning advantages. The point of my question is to be able to educate others Well, I've seen a lot of articles and tutorials which often state "Let's mark this up in the most semantic possible way". But a strange thought came to me, why? Why would one need (or want) to bother with the specific elements which convey the correct semantic meaning? Specifically, I'm referring to the new HTML5 elements, such as <time>, <output>, or <address>. Especially, if the page "works" (it renders nicely in all browsers). Why would I want to use elements like <time> or <address>, where nothing at all (or at the worst case, a generic <span>) works just as nicely? I'm asking this because I'm seeing a multitude of (very popular) websites (this one included) which does not follow these so-called best practices.

  Read the article

• How do you reset the range of available ports that libvirt autoport can use?

  - by bcmcfc

  Libvirt is using its autoport setting to automatically allocate ports within a range starting at 5900. Example excerpt from an XML configuration for a VM: <graphics type='spice' port='6000' autoport='yes' listen='127.0.0.1' keymap='en-gb'> <listen type='address' address='127.0.0.1'/> </graphics> Currently, there are free ports at various points within the range 5900 to 5999. However, newly booted VMs are picking up ports from 6000 on. I need for it to reuse the available ports in the 59xx range. Is this possible? If so, how do I do this? The problem arose because VMs are being accessed via websockets, and it tried to use 6000 which is a reserved port for X11. A solution that explains how to blacklist ports from being picked up by autport would also be sufficient.

  Read the article

• Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

  - by user207207

  Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• Yahoo toolbar and local sites (e.g. Intranet)

  - by Klaptrap

  We have local sites running on IIS in regular MS Windows network. User base has IE, FireFox and Chrome. Local sites are isolated by host headers and DNS record created for the common IP accordingly. This is a regular set-up. Users without Yahoo Toolbar type http://intranet and the sites resolves. Users with Yahoo toolbar type http://intranet and the toolbar goes off to search for this site in public domain. This is irrespective to whether the address is typed into the browser address bar or the toolbar. All versions of toolbar and IE are affected. I cannot see a setting on the toolbar to switch this "irritating" behaviour off and simply un-installing the toolbar is not an option. Any ideas?

  Read the article

• Setting up the metasploitable in virtualbox

  - by SetSlapShot

  I'm supposed to try and use kali to do exploits on metasploitable, but I'll burn that bridge when I get there. My question right now is: How do I set up a host only network on virtualbox? I heard that it was unsafe to run metasploitable in bridged networking mode, that host only or NAT is better. When I run metasploitable on NAT, the kali box (attacker) has the same ip address as the metasploitable box, and nmap doesn't really return anything except what I can only assume would be a scan of its own ports? I tried to create a host only network in virtual box. I left the adapter settings at the default, and unchecked DHCP server. now when I run ifconfig on the metasploitable box, there is no ip address listed. Am I setting up/connecting to/not configuring the host only network correctly?

  Read the article

• ISP issue browsing "sonos.com" - need to diagnose and prove [closed]

  - by john

  I am unable to browse to a website "sonos.com" with my ISP (virgin). I have ruled out browsers, PCs, macs, routers, wifi, etc. Other ISPs (even other virgin connections in different areas!) supply this site no problem. I am 99% convinced there is a DNS issue lurking here. There is something fishy about the DNS for the site : What I notice is that online DNS sites tell me the right IP address for "sonos.com", but not for "www.sonos.com". Anyway when I type "sonos.com" the browser (any/all of the 4 I tried) fail to display the page. Firefox gives a "connection was reset" error. If I browse to sonos.com using the IP address it works OK. Browsing to www.sonos.com or sonos.com works fine with other ISPs of course. Questions: 1 Does anyone have any idea what might be going on here? 2 Any suggestions as to tools/monitors to help investigate/prove what is going on I can then take this up with virgin and/or sonos. Thanks

  Read the article

• how can I force automatic filling to be enabled on webpages?

  - by thepaulpage

  I'm using the Chrome Browser. I enjoy the "automatic filling" that it uses to fill in things like my address when I'm shopping online. Sometimes I get a message that says: "This webpage has disabled automatic filling for this form" Is there a way that I can tell Chrome to ignore what the webpage wants and just give me what I want? I'm not talking about passwords, I'm talking about Chrome's automatic filling in of things like my email address, zip code, etc. For Example: https://www.kansas.gov/ump/register/account?

  Read the article

< Previous Page | 587 588 589 590 591 592 593 594 595 596 597 598  | Next Page >