Search Results

Search found 18489 results on 740 pages for 'which key'.

Page 593/740 | < Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600  | Next Page >

  • NumLock is so weired in Ubuntu

    - by ???
    The NumLock and the keypad is so weired in Ubuntu. I have two computers, A is a desktop, with USB keyboard, B is a laptop, with laptop keyboard and another USB keyboard. On the desktop A, whether the NumLock is on or off, the number keys on the keypad just don't work. Also the NumLock LED is always off. The logs shown in xev: KeyPress event, serial 36, synthetic NO, window 0x6800001, root 0xb0, subw 0x0, time 9541332, (172,-12), root:(1846,452), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x6800001, root 0xb0, subw 0x0, time 9541412, (172,-12), root:(1846,452), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False And on the laptop B, I found that, when the NumLock is on, then many key combinations won't work. For example, generally Ctrl-A is used to select all, but it won't work when NumLock is on. The logs shown in xev: (no log when pressed Fn+NumLock on the laptop keyboard) Logs when pressed the NumLock on the USB keyboard: (Switch On) KeyPress event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187595, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False PropertyNotify event, serial 40, synthetic NO, window 0xb600001, atom 0x1b8 (XKLAVIER_STATE), time 22187601, state PropertyNewValue KeyRelease event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187723, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False (Switch Off) KeyPress event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22187899, (102,107), root:(1198,133), state 0x0, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False PropertyNotify event, serial 40, synthetic NO, window 0xb600001, atom 0x1b8 (XKLAVIER_STATE), time 22187904, state PropertyNewValue KeyRelease event, serial 40, synthetic NO, window 0xb600001, root 0xac, subw 0x0, time 22188003, (102,107), root:(1198,133), state 0x10, keycode 77 (keysym 0xff7f, Num_Lock), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • Windows 7 ignores F6/F8 and will not boot

    - by P.Brian.Mackey
    I have a work PC with sophos safeguard encryption on it. Windows failed to start. When I bootup I receive an error saying a recent hardware or software change might be the cause. File: \Boot\BCD Status: 0xc0000098 Info: The windows boot configuration data file does not contain a valid OS entry. This began after the PC forced me to run a system recovery. My machine had powered down improperly (power outage?) and simply would not respond to my keyboard input to cancel the option to scan my system. After the scan "repaired" a boot file, my system crashed. Now it tells me I can insert my windows 7 disk and run recovery. I can't simply do this because of Safeguard. The system recovery can't see my encrypted drive. I tried hitting F2 to manually login to Safeguard and then selected the option to boot from media. The computer prompts me to hit any key to boot from disk...which I do, but once again it is not reading my keyboard input. I can't get F8/F6 to bypass startup files and get me to a command prompt like the old days. If I could get to a command prompt I might could recover the file windows jacked up from its backup location...though I may need to use the windows recovery disk UI to do this..??? In the past I've been able to slap in a PS/2 keyboard when the USB keyboards stop responding like this. I have no PS/2 keyboard available. Anyone have any idea how I can undo the damage windows system recovery has done with safeguard installed?

    Read the article

  • Best console based text editor not only for programmers [closed]

    - by robo
    I need console based text editor for writing both source codes and human readable texts such as emails. I need it to be user friendly. It mean for me: You can use it the same way as the notepad or gedit. You can use mouse there. If you need your mother of girlfriend or somebody to edit your text they will know what to do, they will not realize it is a console and will have only a feeling it is something like a notepad. copy, paste, undo works as usual with usual key combinations (Ctrl-C, Ctrl-V, Ctrl-Z). shift and arrows works as usual. They select the text. And when I return to the computer I want to use the text editor for programming. I expect: Syntax highliting auto indenting replacing spaces with tabs keyboard shortcuts for compiling possibility to configure it to use a debugger autocompletions for c#, java, c++ and other languages other things I expect from IDE's. I was working and configuring vim for a few years. But It never fulfilled all of my expectations (but it almost did). I thing I could get vim configured perfectly if I had few more weeks time for configurating it. Unfortunately I cannot afford to be configuring vim forever. Is there other alternative? Hopefully some editor I once set up and it will works forever? What do you use? I often hear people are using emacs. Is it worth learning?

    Read the article

  • Only tunnel certain applications via OpenVPN

    - by jinjin
    Hi, I've purchased a VPN solution, it works correctly when I have "redirect-gateway def1" in the configuration file (routing all traffic through the VPN). However when I remove that line from the configuration file, I am still able to ping-out of the machine (ping -I tap0), however I cannot ping the IP assigned to the machine (it's a public ip), i get the error: Destination Host Unreachable. I only want to have certain applications sending traffic through the VPN tunnel (eg: ZNC, irssi), all of which i can select which IP they use. However they can't recieve any data, making the tunnel essentially useless to me when disabling redirect-gateway. Any ideas on how to allow specific applications use the tunnel, without of forcing everything to go through it? My configuration file is as follows: dev tap remote #.#.#.# float #.#.#.# port 5129 comp-lzo ifconfig #.#.#.# 255.255.255.128 route-gateway #.#.#.# #redirect-gateway def1 secret key.txt cipher AES-128-CBC The output of ifconfig -a when the tunnel is connected: tap0 Link encap:Ethernet HWaddr 00:ff:47:d3:6d:f3 inet addr:#.#.#.# Bcast:#.#.#.# Mask:255.255.255.255 inet6 addr: <snip> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:612 errors:0 dropped:0 overruns:0 frame:0 TX packets:35 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:25704 (25.1 KiB) TX bytes:6427 (6.2 KiB) EDIT: the Bcast:#.#.#.# (ifconfig) is different from route-gateway #.#.#.# (openvpn) if that makes any difference.

    Read the article

  • IIS 7 and ASP.NET State Service Configuration

    - by Shawn
    We have 2 web servers load balanced and we wanted to get away from sticky sessions for obvious reasons. Our attempted approach is to use the ASP.NET State service on one of the boxes to store the session state for both. I realize that it's best to have a server dedicated to storing sessions but we don't have the resources for that. I've followed these instructions to no avail. The session still isn't being shared between the two servers. I'm not receiving any errors. I have the same machine key for both servers, and I've set the application ID to a unique value that matches between the two servers. Any suggestions on how I can troubleshoot this issue? Update: I turned on the session state service on my local machine and pointed both servers to the ip address on my local machine and it worked as expected. The session was shared between both servers. This leads me to believe that the problem might be that I'm not using a standalone server as my state service. Perhaps the problem is because I am using the ip address 127.0.0.1 on one server and then using a different ip address on the other server. Unfortunately when I try to use the network ip address as opposed to localhost the connection doesn't seem to work from the host server. Any insight on whether my suspicions are correct would be appreciated.

    Read the article

  • Strange WiFi problem - network is "not connected" but works

    - by GalacticCowboy
    Background I'm using a Windows XP tablet PC connected to my home network. I do broadcast the SSID, but otherwise the wireless network is locked down as tight as I can make it - WPA2 with a strong key, MAC filtering, etc. I've had this computer for about 4 years and the router for about 6 months. Before that, the previous router was set up in the same way, and I've never had any particular problems. Problem This morning - as I type this, as a matter of fact - Windows is reporting that none of my network connections are connected. Yet somehow my Internet connectivity still works! ipconfig reports a valid IP address, domain, etc., even though Windows apparently doesn't know about it. I tried repairing the connection and it had no effect - the repair eventually timed out. I'm pretty sure that I could reboot the computer and/or the router, etc. and it would fix the problem. However, I'm more interested in knowing if any of you have ever seen anything like this, and what might have caused it? Since it works I'm not inclined to mess with it too much. My concern is that it's a precursor to bigger problems.

    Read the article

  • Mail not piping in postfix

    - by user220912
    I have setup a postfix server and wanted to test the piping of mail to my perl script where i can make use of it and filter the mails.I wrote a test script for that which just logs the information in txt file. but i don't see any changes on sending the mail. My postconf-n output: alias_database = hash:/etc/aliases append_dot_mydomain = no command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = yantratech.co.in, localhost.localdomain, localhost myhostname = tcmailer8.in mynetworks = 103.8.128.62, 103.8.128.69/101, 168.100.189.0/28, 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES recipient_delimiter = + relayhost = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/pki/tls/certs/tcmailer8.in.cert smtpd_tls_key_file = /etc/pki/tls/private/localhost.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes transport_maps = hash:/etc/postfix/transport virtual_alias_maps = hash:/etc/postfix/virtual virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = /etc/postfix/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000 here's my transport: [email protected] email_route my main.cf declaration: transport_maps = hash:/etc/postfix/transport my master.cf declaration: email_route unix - n n - - pipe flags=FR user=nobody argv=/etc/postfix/test.php -f $(sender) -- $(recipient) and my php script: #!/usr/bin/php <?php $fh = fopen('/etc/postfix/testmail.txt','a'); fwrite($fh, "Hello it works\n"); fclose($fh); ?> I am sending mails through telnet in localhost.

    Read the article

  • College network - can I point non-domain student computers to our SUS server?

    - by Joel Coel
    Since I started here 3 months ago, one of the things that's really bothered me about the way this network is setup is something that shows up on the daily bandwidth consumption report. I get a list of top-visited sites by hits and by size, and invariably the top site (to the point that it's bigger than all the other top sites combined) is au.download.windowsupdate.com. We're pulling in ~30GB/day in windows updates. This is every day, not just after a patch Tuesday. After a patch day, it jumps closer to 40GB for a couple days. The key here is that almost none if it is by machines that I'm responsible for. My machines are for the most part fully patched, and when they're not they'll pull from a SUS server, so new updates are downloaded only once. It used to be closer to 50GB/day because most of the machines in our computer labs use DeepFreeze and weren't applying updates correctly, but that's fixed now. So the problem is definitely student-owned machines in the dorms, some of which are re-downloading the same updates in background each day, over and over. I'd love to have these machines start pulling from our SUS server. Then, if they don't ever actually install them at least they're not leeching bandwidth from our public internet connection. Any ideas on how to resolve the situation?

    Read the article

  • Why do I need to set up Autologon values in registry twice before it works and can i fix this?

    - by jJack
    Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however.

    Read the article

  • IIS not responding with SSL Server Hello

    - by Damien_The_Unbeliever
    I'm having difficulty getting a particular IIS machine to "do" SSL. This is a test environment (one of many) which we've set up "the same" as we have many times previously, but it just doesn't seem to be working. The server is Windows Server 2003 (Version 5.2 (Build 3790.srv03_sp2_gdr.100216-1301 : Service Pack 2)) IIS is hosting 4 sites (including the default site), but only one site is configured for SSL. We're using the same SSL certificate we use on all of our other servers (it's a wildcard cert). (Don't think this is relevant, but including anyway) We've configured the site to require SSL, it has a subdirectory that doesn't require SSL but has an asp page that redirects into SSL. The 403;4 error page for the site is hooked up to this asp page (this is how we do our non-HTTPS into HTTPS transition). Using Microsoft Network Monitor (3.3), I've just run a session against a server where SSL is working. It can pull apart the SSL exchange as the following messages: SSL: Client Hello SSL: Server Hello. Certificate. Server Hello Done SSL: Client Key Exchange. Change Cipher Spec. Encrypted Handshake Message. SSL: Change Cipher Spec. Encrypted Handshake Message However, on our problem server, I only see: SSL: Client Hello. The next packet from the server (from port 443, so it's listening and responding there) contains only 60 bytes, and just seems to have the Tcp headers and not much else (but I'm by no means an expert at deciphering these things). So, where do I look next? Or what additional information do I need to add to this question, and where do I find it?

    Read the article

  • Certificate revocation check fails for non-domain guest in spite of accessible CRL

    - by 0xFE
    When we try to use certificates on computers that are not part of the domain, Windows complains that The revocation function was unable to check revocation because the revocation server was offline. However, if I manually open the certificate and check the CRL Distribution Point property, I see an ldap:/// URL and an http:// URL that points to externally-accessible IIS site that hosts the CRLs. Of course, the non-domain-joined client cannot access the ldap:/// URL, but it can download the CRL from the http:// link (at least in a browser). I enabled CAPI logging and I see the event that corresponds to this failed revocation check. The RevocationInfo section is: RevocationInfo [ freshnessTime] PT11H27M4S RevocationResult The revocation function was unable to check revocation because the revocation server was offline. [ value] 80092013 CertificateRevocationList [ location] UrlCache [ url] http://the correct URL [fileRef] 6E463C2583E17C63EF9EAC4EFBF2AEAFA04794EB.crl [issuerName] the name of the CA Furthermore, I can see the HTTP request to the correct URL and the server's response (HTTP 304 Not Modified) with Microsoft Network Monitor. I ran certutil -verify -urlfetch, and it seems to show the same thing: the computer recognizes both URLs, tries both, and even though the http:// link succeeds, returns the same error. Is there a way to have non-domain-joined clients skip the ldap:/// link and only check the http:// one? Edit: The ldap:/// URL is ldap:///CN=<name of CA>,CN=<name of server that is running the CA>,CN=CDP,CN=Public Key Services,CN=Services,CN=Configuration,DC=<domain name>?certificateRevocationList?base?objectClass=cRLDistributionPoint The non-domain-joined clients may be on the domain network or on an external network. The http:// CDP is accessible from the public internet.

    Read the article

  • How do I stop linux from trying to mount android phone as usb storage?

    - by user1160711
    When I plug in my Motorola Triumph to my fedora 17 linux box USB port, I get an endless series of errors on the linux box as it desperately attempts to mount the phone as a USB drive. Stuff like this: Jun 23 10:26:00 zooty kernel: [528926.714884] end_request: critical target error, dev sdg, sector 4 Jun 23 10:26:00 zooty kernel: [528926.715865] sd 16:0:0:1: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 23 10:26:00 zooty kernel: [528926.715869] sd 16:0:0:1: [sdg] Sense Key : Illegal Request [current] Jun 23 10:26:00 zooty kernel: [528926.715872] sd 16:0:0:1: [sdg] Add. Sense: Invalid field in cdb Jun 23 10:26:00 zooty kernel: [528926.715876] sd 16:0:0:1: [sdg] CDB: Read(10): 28 20 00 00 00 00 00 00 04 00 If I go ahead and tell the phone to allow linux to mount the USB storage, the messages stop, and I get a mounted drive, but if all I want to do is use the debug bridge, my log on linux will continue to fill with this junk. Is there some udev magic I can do to make the system ignore this particular device as far as usb storage goes? I just noticed that if I tell the phone to enable USB storage, let linux recognize the new disk, then tell the phone to disable USB storage again, I get one additional log message about capacity changing to zero, but the endless spew of messages stops, so I guess one work around is to enable and disable USB right away.

    Read the article

  • Linux Live CD only works when Windows is in Legacy mode?

    - by Vee
    I have asked a similar question before and no one was able to help me but I think it was because I wasn't phrasing it properly. This is a better restatement of the question. I have Windows 8 and Linux Mint dual booted on my pc. When I tried to boot the Linux from a CD ROM only, it would give me the following error: error: failure reading sector 0x0 from 'hd1' error: you need to load the kernel first. Press any key to continue... The Linux Mint works fine but otherwise, but it gives this error when I try to boot from CD. The boot Linux from CD only worked when I changed the Windows to Legacy mode in the BIOS settings. When I changed it back to UEFI, it would give the same error. Why is this? How can I fix it? I am somewhat new so is there anything else I should know about all of this? NOTE: I changed the Linux into UEFI mode using boot-repair but that still did not solve the problem when I tried to boot from CD ROM.

    Read the article

  • Nginx terminate SSL for wordpress

    - by Mike
    I have a bit of a problem. We run a wordpress blog behind a ngnix proxy and looking to terminate the ssl on the nginx side. Our current nginx config is upstream admin_nossl { server 192.168.100.36:80; } server { listen 192.168.71.178:443; server_name host.domain.com; ssl on; ssl_certificate /etc/nginx/wild.domain.com.crt; ssl_certificate_key /etc/nginx/wild.domain.com.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_prefer_server_ciphers on; ssl_session_cache shared:SSL:10m; ssl_ciphers RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; location / { proxy_read_timeout 2000; proxy_next_upstream error; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_max_temp_file_size 0; proxy_pass http://admin_nossl; break; It just does not seem to work. If I can hit https://host.domain.com but it quickly switches back to non-secured from what I can see. Any pointers?

    Read the article

  • How to prevent Gnome-shell's Alt+Tab from grouping windows from similar apps?

    - by wleoncio
    I love pretty much everything about how Gnome Shell handles app-switching through Alt+Tab. My one gripe with it, though, is how it forces the user to use Alt+` to switch between windows of the same app. This is very annoying for me, because now I have to keep in mind if the last window I was using belonged to the same app as the current window or not. Definitely a nuisance for power users who thinks in terms of "windows I'm working with" instead of "applications I'm working on". I've tried the AlternateTab extension ( https://extensions.gnome.org/extension/15/alternatetab/ ), but it's looks way too ugly for me. Not to mention that in the end all I want is to remap Alt+(key above tab) to Alt+Tab on this application. I guess one option would be to just tweak Gnome-shell. My guess is that I should tinker with the altTab.js file at /usr/share/gnome-shell/js/ui/, but the file is too long and overwhelming for someone like me, who doesn't know JavaScript. Does anyone know how I can make Gnome Shell stop grouping windows by applications?

    Read the article

  • Systemd Service Start With Dynamic Port Value From Docker

    - by Sheriffen
    Using CoreOS, Docker and systemd to manage my services I want to properly perform service discovery. Since CoreOS utilizes etcd (distributed key-value) there is a very convenient way to do this. On systemd's ExecStartPost I can just insert the started service into etcd without problems. My usecase needs something like this: ExecStartPost=/usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": 5555 }' which works like a charm. But this is where my idea popped up. Docker has the power to randomly assign a port if I just run docker run -p 5555 which is awesome since I don't have to set it statically in the *.service file and I could possibly run multiple instances on the same host. What if I could get the randomly assigned port and insert instead of the static 5555? Turns out I can use the docker port command to get the port and with some formatting we can get just the port with $(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2) which works if I set it (using bash) like this: /usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": '$(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2)' }' but using systemd I just can't get it to work. This is the code I'm using: ExecStartPost=/usr/bin/etcdctl set /services/myServiceName '{ \"host\": \"%H\", \"port\": '$(echo $(/usr/bin/docker port my-container-name 5555) | cut -d':' -f2)'}' Somehow I got something wrong but it's hard to debug since it works when typed in the terminal.

    Read the article

  • Configuring postfix with Gmail

    - by MultiformeIngegno
    This is what I did.. sudo apt-get install postfix This is my /etc/postfix/main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = tsXXX561.server.topcloud.it alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = [smtp.gmail.com]:587 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only default_transport = smtp relay_transport = smtp inet_protocols = all # SASL Settings smtp_use_tls=yes smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_tls_CAfile = /etc/postfix/cacert.pem Then I created the file /etc/mailname with my hostname as content: tsXXX561.server.topcloud.it Then I created the file /etc/postfix/sasl_passwd: [smtp.gmail.com]:587 [email protected]:gmail_password Then sudo postmap /etc/postfix/sasl/passwd sudo cat /etc/ssl/certs/Thawte_Premium_Server_CA.pem | sudo tee -a /etc/postfix/cacert.pem service postfix restart Still sends nothing... I'm on Ubuntu Server 12.04.

    Read the article

  • Terminal emulation has stopped working. Garbage escape chars

    - by oligofren
    To enable me to do some remote administration of our servers I started using a terminal emulation program called TouchTerm Pro on my iPhone. While not the smoothest experience, it has allowed me to leave my computer behind when going out of town, which makes the slightly painful experience worthwhile. As of late, the app unfortunately no longer works. Pressing up and down keys after logging on via ssh gives me garbage like ^[[A and ^[[B. Combinations with Ctrl - like you can see in the video - no longer works either. Writing full command lines and executing by the enter key works though. Being able to search my bash history was the difference between a usable app and endless frustration, so getting it to work is essential. The app has (of course) met its end of life, not getting updated anymore. I am not quite sure, which side (client or server) that has to be "fixed"/hacked to make the control sequences work again. But is there something I can do to make it work as intended? You can see a video of TouchTerm in operation here.

    Read the article

  • What are the IR codes the new Apple Remote (alu) uses?

    - by index
    I would like to clone the new Apple Remote (infrared, second generation, aluminium) just for fun with a microcontroller. Most codes of the previous model can be found in the LIRC remote control database (all except the key combinations menu + <<,play, which unpair, change ID, pair the remote. I also don't know which bit encodes the battery status. It uses a modified 32 bit NEC protocol (reverse LIRC codes bytewise). But the new Apple remote uses two additional codes for the play and the new select button. I don't have a mac, so I can't brute force test codes either ;-) So if someone possesses such a remote and the ability of recording those two new buttons and three combinations I'd really appreciate it. If you can't run LIRC (or it gets confused by the new codes) and you don't have an oscilloscope or logic analyser, maybe you could hook up a photo diode to your sound input and record the codes with Audacity? Just hit record, hit each button and combo a few times, hit stop, upload the uncompressed WAV file to a sharing site, done. That'd be great!

    Read the article

  • How can laptop keyboard keys be removed and replaced?

    - by Lord Torgamus
    I'm trying to fix a laptop keyboard that has issues with keys on its left side. Just by feel, it's clear that something sticky got under there. There could be something crunchy too, but that might just be the sound of the key's spring releasing itself from the sticky. I don't know the cause because it's not my computer and the owner isn't sure, but I'm guessing soda spill for now. The computer is an HP dv2500. I've removed the keyboard and blown under it but that hasn't helped. I didn't use compressed air because I just don't have any available, but I suspect it wouldn't help with sticky. So, I'd like to pop they keys off and clean with damp cotton swabs or similar. Is there a proper way to remove the keys? I've found some instructions via Google for non-laptop keyboards, but they don't seem like they'd work for me. Alternate solutions to the problem also welcome, but I've been curious about how to remove the keys for some time for other reasons.

    Read the article

  • Debian 6: setting up FTP just for website editing

    - by David Oliver
    I have a VPS using Debian 6.0. Currently, SSH is set to not accept password logins, and only key-based ones. A person who needs to work on one particular website (a vhost) wishes to use FTP. He doesn't need/want SSH. How can I set up FTP access for him, enabling him to have write permissions for all files in the relevant directory, and only the relevant directory? The directory is /srv/www/domainname.com/public_html Currently, all directories and files in that directory belong to www-data:www-data and are 644/755. I've installed vsftpd and have been reading some guides, but they all seem to deal with allowing multiple users to have their own user-named directories which isn't what I'm after. I can't seem to work out how to simply define one FTP user with a password that has access to one directory of my choosing. This is my first experience of setting up an FTP server. Thanks. Edit: have also found this - maybe I should be using ProFTPd, or can vsftpd also do what I want?

    Read the article

  • Connection between Asp.Net and Oracle 10g Express Edition

    - by l3gion
    Hello, I'm struggling to find a way to connect my Asp .Net + C# application with my Oracle 10g Express Edition. Here's my scenario, I'm at Mac OS and I have 2 Virtual machines, one for Win 7 (VS 2010 app) and another with a Parallels Virtual Appliance with Oracle 10g Express Edition 1.1. Which provider (Oledb, ODP.NET, etc..) should I use? How to make the connection to the server in C#? Right now I have this: <appSettings> <add key="conn" value="Data Source=10.211.55.11;Persist Security Info=True;User ID=l3gion;Password=l3gion;" /> </appSettings> And at the .cs file: SqlCommand cmd = new SqlCommand("insert_thing", new SqlConnection(ConfigurationManager.AppSettings["conn"])); cmd.CommandType = CommandType.StoredProcedure; *insert_thing is a stored procedure Using this I got this error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I've searched for some possible solutions. Tried some, including: firewall disabled, allow remote connection at oracle express edition using this cmd line ("EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);").. The error persists. Can anyone guide me into the right direction? I'm a newbie with this type of things. Thank you for your patience. regards

    Read the article

  • Can I format a usb stick on windows xp, in HFS+ format, and make the usb stick mac os x bootable?

    - by user717236
    My Intel Mac OS X computer is corrupt and I feel, at this point, I need to perform a fresh install of the OS. It consistently and automatically logs out, right after I log in. I tried logging in as the root. I tried safe boot and it wouldn't load. Anyway, the point is I want put the Mac OS X installer on a USB thumb drive and have it boot up on the Intel Mac OS X computer. Unfortunately, the computer is inaccessible, as I mentioned above. So, I have a Windows XP machine that I'm using and attempting to create a bootable USB thumb drive that's compatible with Mac OS X. I have tried transmac, macdrive, and paradox for windows -- all of which proved unable to format the usb stick in HFS+. How do I know this? Well, even though the Transmac reports that's been formatted to HFS+, Computer Management in Windows says otherwise: I even put the installer on the usb drive, after transmac reportedly formatted it properly, and the mac os x computer didn't even recognize that a USB thumb drive was inserted, via pressing the option key at boot-up time. I'm not sure what the problem is and how to actually format the drive. Can anybody offer any help? I would appreciate it. Thank you.

    Read the article

  • How can I "filter" postfix-generated bounce messages?

    - by Flimzy
    We are using postfix 2.7 and custom SMTPD (based on qpsmtpd) in highly customized configuration for spam filtering. We have a new requirement to filter postfix-generated bounces through our custom qpsmtpd process (not so much for content filtering, but to process these bounces accordingly). Our current configuration looks (in part) like this: main.cf (only customizations shown): 2526 inet n - - - 0 cleanup pickup fifo n - - 60 1 pickup -o content_filter=smtp:127.0.0.2 Our smtpd injects messages to postfix on port 2526, by speaking directly to the cleanup daemon. And the custom pickup command instructs postfix to hand off all locally-generated mail (from cron, nagios, or other custom scripts) to our custom smtpd. The problem is that this configuration does not affect postfix generated bounce messages, since they do not go through the pickup daemon. I have tried adding the same content_filter option to the bounce daemon commands, but it does not seem to have any effect: bounce unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 defer unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 trace unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 For reference, here is my main.cf file, as well: biff = no # TLS parameters smtpd_tls_loglevel = 0 smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache smtp_tls_security_level = may mydestination = $myhostname alias_maps = proxy:pgsql:/etc/postfix/dc-aliases.cf transport_maps = proxy:pgsql:/etc/postfix/dc-transport.cf # This is enforced on incoming mail by QPSMTPD, so this is simply # the upper possible bound (also enforced in defaults.pl) message_size_limit = 262144000 mailbox_size_limit = 0 # We do our own message expiration, but if we set this to 0, then postfix # will try each mail delivery only once, so instead we set it to 100 days # (which is the max postfix seems to support) maximal_queue_lifetime = 100d hash_queue_depth = 1 hash_queue_names = deferred, defer, hold I also tried adding the internal_mail_filter_classes option to main.cf, but also tono affect: internal_mail_filter_classes = bounce,notify I am open to any suggestions, including handling our current content-filtering-loop in a different way. If it's not clear what I'm asking, please let me know, and I can try to clarify.

    Read the article

  • Shortcut to "printer and faxes" on another computer

    - by Doltknuckle
    I have a print server running windows server 2008 that has about 50 printers on it. In windows XP, I was able to connect to the server using the UNC name and make a shortcut to the "printers and faxes" folder. (For the record, I know that it really isn't a folder, but that's outside the scope of this question.) I have recently switched to windows 7 and I find that the jump lists are really useful. One of the things I want to do is make it easy to connect to that server's "printers and faxes" folder. I would like to use something like a shortcut that I can open and go immediately to that location. The problem is that windows 7 doesn't have a way to create a shortcut like you could in WinXP. They have a button on the toolbar that says "view remote printers" which sends you to the correct folder. I'd like to avoid having to type out the server name. I also can't use the "view network" link in windows explorer. Our organization has over 6,000 machines and viewing the network lists all of them. This is all about saving time by using the minimum number of mouse clicks and key presses in normal operation. Does anyone have any suggestions?

    Read the article

< Previous Page | 589 590 591 592 593 594 595 596 597 598 599 600  | Next Page >