Search Results

Search found 20582 results on 824 pages for 'double array'.

Page 594/824 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

  • Optimal Configuration for five 300 GB 15K SAS Drives

    - by Bob
    I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

    Read the article

  • Problem setting up DL360G5 with scsi RAID

    - by ernelli
    I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

    Read the article

  • The Social Enterprise: Gangnam Style

    - by Mike Stiles
    Are only small and medium businesses able to put social strategies in place, generate consistent, compelling content for customers, and be nimble enough to listen and respond to the social communities they build? Or are enterprise organizations eagerly and effectively adopting social as well? It depends on whom inside the organization you ask. A study from Attensity looked at who “gets” social inside enterprise organizations. The results were unsurprising. Mostly, Generation X and Y employees who came of age with social as part of their lives and as a key communications vehicle understand it. Imagine being a 25-year-old at a company that bans employees from accessing Facebook at work. You may as well tell them they can’t use phones and must do all calculations on an abacus. To them, such policy is absent of real-world logic and signals to them the organization is destined to be the victim of an up-and-comer. After that, it’s senior management that gets social. You don’t get to be in senior management without reading a few things and paying attention. Most senior managers are well aware of the impact social has had and will have, though they may be unsure of what to do about it. The better ones will utilize those on the inside who do inherently know how to communicate and build virtual relationships using social. The very best will get the past out of the way for these social innovators, so the new communications can be enacted minus counterproductive dictums, double-clutching, meeting-creep, and all the other fading internal practices that water down content and impede change. Organizationally, the Attensity study found 81% of enterprise companies believe failing to embrace social will result in their being left behind. Yet our old friend fear still has many captive in its clutches. 79% feel overwhelmed by the volume of social data available, something a social technology partner with goal-oriented analytics expertise could go a long way toward alleviating. Then there’s the fear of social having a negative impact. This comes from a lack of belief in the product, the customer service, or both. The public uses social not to go out and slay brands. They’re using it to be honest. If the fear is that honesty will reflect badly on the brand, the brand has much bigger, broader problems than what happens on Facebook. Sadly, most enterprise organizations still see social as a megaphone, a one-way channel with which to hit people with ads. They either don’t understand social relationships, or don’t want any. The truly unenlightened manager will always say, “We help them by selling them our stuff.” “Brand affinity” is a term, it’s just not one assigned much value in enterprise organizations. Which brings us to Psy, the Korean performer whose Internet video phenom “Gangnam Style,” as of this writing, has been viewed 438,550,238 times on YouTube. It’s bigger than anything a brand will probably ever publish. Most brands would never have seen the point of making or publishing it. But a funny thing happened on the way to Internet success. The video literally doubled the stock price of Psy’s father’s software firm. NH Investment and Securities said, "The positive sentiment has attracted investors just because of the fact the company is owned by Psy's father and uncle.” The company wasn’t mentioned or seen in the video in any way, yet reaped tangible rewards just for being tangentially associated with it. Imagine your brand being visibly and directly responsible for such a smash and tell me it’s worthless. When enterprise organizations embrace the value of igniting passions, making people happier, solving their problems, informing them, helping them have fun, etc., then they will have fully embraced social, and will reap the brand affinity rewards of heightened awareness, brand loyalty and yes, sales.

    Read the article

  • How do I implement SkyBox in xna 4.0 Reach Profile (for Windows Phone 7)?

    - by Biny
    I'm trying to Implement SkyBox in my phone game. Most of the samples in the web are for HiDef profile, and they are using custom effects (that not supported on Windows Phone). I've tried to follow this guide. But for some reason my SkyBox is not rendered. This is my SkyBox class: using System; using System.Collections.Generic; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Graphics; using Rocuna.Core; using Rocuna.GameEngine.Graphics; using Rocuna.GameEngine.Graphics.Components; namespace Rocuna.GameEngine.Extension.WP7.Graphics { /// <summary> /// Sky box element for phone games. /// </summary> public class SkyBox : SkyBoxBase { /// <summary> /// Initializes a new instance of the <see cref="SkyBoxBase"/> class. /// </summary> /// <param name="game">The Game that the game component should be attached to.</param> public SkyBox(TextureCube cube, Game game) : base(game) { Cube = cube; CubeFaces = new Texture2D[6]; PositionOffset = new Vector3(20, 20, 20); CreateGraphic(512); StripTexturesFromCube(); InitializeData(Game.GraphicsDevice); } #region Properties /// <summary> /// Gets or sets the position offset. /// </summary> /// <value> /// The position offset. /// </value> public Vector3 PositionOffset { get; set; } /// <summary> /// Gets or sets the position. /// </summary> /// <value> /// The position. /// </value> public Vector3 Position { get; set; } /// <summary> /// Gets or sets the cube. /// </summary> /// <value> /// The cube. /// </value> public TextureCube Cube { get; set; } /// <summary> /// Gets or sets the pixel array. /// </summary> /// <value> /// The pixel array. /// </value> public Color[] PixelArray { get; set; } /// <summary> /// Gets or sets the cube faces. /// </summary> /// <value> /// The cube faces. /// </value> public Texture2D[] CubeFaces { get; set; } /// <summary> /// Gets or sets the vertex buffer. /// </summary> /// <value> /// The vertex buffer. /// </value> public VertexBuffer VertexBuffer { get; set; } /// <summary> /// Gets or sets the index buffer. /// </summary> /// <value> /// The index buffer. /// </value> public IndexBuffer IndexBuffer { get; set; } /// <summary> /// Gets or sets the effect. /// </summary> /// <value> /// The effect. /// </value> public BasicEffect Effect { get; set; } #endregion protected override void LoadContent() { } public override void Update(GameTime gameTime) { var camera = Game.GetService<GraphicManager>().CurrentCamera; this.Position = camera.Position + PositionOffset; base.Update(gameTime); } public override void Draw(GameTime gameTime) { DrawOrder = int.MaxValue; var graphics = Effect.GraphicsDevice; graphics.DepthStencilState = new DepthStencilState() { DepthBufferEnable = false }; graphics.RasterizerState = new RasterizerState() { CullMode = CullMode.None }; graphics.BlendState = new BlendState(); graphics.SamplerStates[0] = SamplerState.AnisotropicClamp; graphics.SetVertexBuffer(VertexBuffer); graphics.Indices = IndexBuffer; Effect.Texture = CubeFaces[0]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 0, 2); Effect.Texture = CubeFaces[1]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 6, 2); Effect.Texture = CubeFaces[2]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 12, 2); Effect.Texture = CubeFaces[3]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 18, 2); Effect.Texture = CubeFaces[4]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 24, 2); Effect.Texture = CubeFaces[5]; Effect.CurrentTechnique.Passes[0].Apply(); graphics.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, _vertices.Count, 30, 2); base.Draw(gameTime); } #region Fields private List<VertexPositionNormalTexture> _vertices = new List<VertexPositionNormalTexture>(); private List<ushort> _indices = new List<ushort>(); #endregion #region Private methods private void InitializeData(GraphicsDevice graphicsDevice) { VertexBuffer = new VertexBuffer(graphicsDevice, typeof(VertexPositionNormalTexture), _vertices.Count, BufferUsage.None); VertexBuffer.SetData<VertexPositionNormalTexture>(_vertices.ToArray()); // Create an index buffer, and copy our index data into it. IndexBuffer = new IndexBuffer(graphicsDevice, typeof(ushort), _indices.Count, BufferUsage.None); IndexBuffer.SetData<ushort>(_indices.ToArray()); // Create a BasicEffect, which will be used to render the primitive. Effect = new BasicEffect(graphicsDevice); Effect.TextureEnabled = true; Effect.EnableDefaultLighting(); } private void CreateGraphic(float size) { Vector3[] normals = { Vector3.Right, Vector3.Left, Vector3.Up, Vector3.Down, Vector3.Backward, Vector3.Forward, }; Vector2[] textureCoordinates = { Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, Vector2.UnitY, Vector2.Zero, Vector2.UnitX, Vector2.One, }; var index = 0; foreach (var normal in normals) { var side1 = new Vector3(normal.Z, normal.X, normal.Y); var side2 = Vector3.Cross(normal, side1); AddIndex(CurrentVertex + 0); AddIndex(CurrentVertex + 1); AddIndex(CurrentVertex + 2); AddIndex(CurrentVertex + 0); AddIndex(CurrentVertex + 2); AddIndex(CurrentVertex + 3); AddVertex((normal - side1 - side2) * size / 2, normal, textureCoordinates[index++]); AddVertex((normal - side1 + side2) * size / 2, normal, textureCoordinates[index++]); AddVertex((normal + side1 + side2) * size / 2, normal, textureCoordinates[index++]); AddVertex((normal + side1 - side2) * size / 2, normal, textureCoordinates[index++]); } } protected void StripTexturesFromCube() { PixelArray = new Color[Cube.Size * Cube.Size]; for (int s = 0; s < CubeFaces.Length; s++) { CubeFaces[s] = new Texture2D(Game.GraphicsDevice, Cube.Size, Cube.Size, false, SurfaceFormat.Color); switch (s) { case 0: Cube.GetData<Color>(CubeMapFace.PositiveX, PixelArray); CubeFaces[s].SetData<Color>(PixelArray); break; case 1: Cube.GetData(CubeMapFace.NegativeX, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 2: Cube.GetData(CubeMapFace.PositiveY, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 3: Cube.GetData(CubeMapFace.NegativeY, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 4: Cube.GetData(CubeMapFace.PositiveZ, PixelArray); CubeFaces[s].SetData(PixelArray); break; case 5: Cube.GetData(CubeMapFace.NegativeZ, PixelArray); CubeFaces[s].SetData(PixelArray); break; } } } protected void AddVertex(Vector3 position, Vector3 normal, Vector2 textureCoordinates) { _vertices.Add(new VertexPositionNormalTexture(position, normal, textureCoordinates)); } protected void AddIndex(int index) { if (index > ushort.MaxValue) throw new ArgumentOutOfRangeException("index"); _indices.Add((ushort)index); } protected int CurrentVertex { get { return _vertices.Count; } } #endregion } }

    Read the article

  • How to access a fake raid?

    - by maaartinus
    I have a fake raid, which I wanted to access using mdadm /dev/md0 -A -c 128 -l stripe --verbose /dev/sda /dev/sdc which should be right, as far as I understand the man page. But I get the message mdadm: option -l not valid in assemble mode leaving the offending option out leads to mdadm: failed to create /dev/md0 and (despite verbose) no more information. I'm assuming that -A requires some mdadm-specific header which is obviously missing. I probably need to use "build" instead of assemble, but from the description I'm really unsure whether this is a non-destructive operation. Is it? What should I exactly do? UPDATE I see I haven't made clear, that the array already exists as a fake-raid (I can't give the details about my mainboard now). It looks like doing nothing except for interleaving blocks, so I hoped it could be easily done using mdadm, too. Maybe I'm completely wrong, but all the info I've found was concerned with booting from fake-raid, what I don't really need. I'd be happy with a read access for now.

    Read the article

  • Optimal Configuration for five 300 GB 15K SAS Drives

    - by Bob
    I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

    Read the article

  • Should I use a config file or database for storing business rules?

    - by foiseworth
    I have recently been reading The Pragmatic Programmer which states that: Details mess up our pristine code—especially if they change frequently. Every time we have to go in and change the code to accommodate some change in business logic, or in the law, or in management's personal tastes of the day, we run the risk of breaking the system—of introducing a new bug. Hunt, Andrew; Thomas, David (1999-10-20). The Pragmatic Programmer: From Journeyman to Master (Kindle Locations 2651-2653). Pearson Education (USA). Kindle Edition. I am currently programming a web app that has some models that have properties that can only be from a set of values, e.g. (not actual example as the web app data confidential): light-type = sphere / cube / cylinder The light type can only be the above three values but according to TPP I should always code as if they could change and place their values in a config file. As there are several incidents of this throughout the app, my question is: Should I store possibly values like these in: a config file: 'light-types' = array(sphere, cube, cylinder), 'other-type' = value, 'etc = etc-value a single table in a database with one line for each config item a database with a table for each config item (e.g. table: light_types; columns: id, name) some other way? Many thanks for any assistance / expertise offered.

    Read the article

  • Turn Based Event Algorithm

    - by GamersIncoming
    I'm currently working on a small roguelike in XNA, which sees the player in a randomly generated series of dungeons fending off creeps, as you might expect. As with most roguelikes, the player makes a move, and then each of the creeps currently active on screen will make a move in turns, until all creeps have updated, and it return's to the player's go. On paper, the simple algorithm is straightforward: Player takes turn Turn Number increments For each active creep, update Position Once all active creeps have updated, allow player to take next turn However, when it comes to actually writing this in more detail, the concept becomes a bit more tricky for me. So my question comes as this: what is the best way to handle events taking turns to trigger, where the completion of each last event triggers the next, when dealing with a large number of creeps (probably stored as an array of an enemy object), and is there an easier way to create some kind of engine that just takes all objects that need updating and chains them together so their updates follow suit? I'm not asking for code, just algorithms and theory in the direction of objects triggering updates one after the other, in a turn based manner. Thanks in advance. Edited: Here's the code I currently have that is horrible :/ if (player.getTurnOver() && updateWait == 0) { if (creep[creepToUpdate].getActive()) { creep[creepToUpdate].moveObject(player, map1); updateWait = 10; } if (creepToUpdate < creep.Length -1) { creepToUpdate++; } else { creepToUpdate = 0; player.setTurnOver(false); } } if (updateWait > 0) { updateWait--; }

    Read the article

  • breaking mdadm raid and moving to NTFS

    - by daveyt
    I'm running Ubuntu 8 something and my data is on a mirrored pair of 1TB disks formatted as ext3, and the RAID is via mdadm. I want to move to Windows 7 (yeah yeah I know but Linux aint doing it for me at the moment) and migrate the disks to NTFS. My plan is: Break the MDADM RAID (by failing one disk logically) Format the 'failed' disk as NTFS Copy data from the RAID array to the NTFS disk (dont care about perms) Install Windows, (new separate non RAid disk) and my data disk is available. I've researched this and it seems the easiest way. I dont have another disk to back up to so I think this is my only way. Can anyone see a better/easier way?

    Read the article

  • Identify SATA hard drive

    - by Rob Nicholson
    Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

    Read the article

  • Switching mdadm to an external bitmap

    - by Oli
    I've just read this in another post about improving RAID5/6 write speeds: After increasing stripe cache & switching to external bitmap, my speeds are 160 Mb/s writes, 260 Mb/s reads. :-D I've already found out how to increase the stripe cache and this worked pretty well but I'd like to know more about an external bitmap. I have an incredibly fast (540MB/s) RAID0 SSD that would do well if a bitmap does what I think it does but I'm still very unsure. I've only known about them as long as I've known this post. A few questions: What is a bitmap (in terms of mdadm)? What are the advantages of an internal bitmap (over external)? What are the advantages of an external bitmap (over internal)? How do I switch between the two? I should add that while this is a I'm-bored-let's-break-something thread, I do value the data stored on the RAID array. If doing this is going to put data at significant risk, please let me know.

    Read the article

  • Collision checking problem on a Tiled map

    - by nosferat
    I'm working on a pacman styled dungeon crawler, using the free oryx sprites. I've created the map using Tiled, separating the floor, walls and treasure in three different layers. After importing the map in libGDX, it renders fine. I also added the player character, for now it just moves into one direction, the player cannot control it yet. I wanted to add collision and I was planning to do this by checking if the player's new position is on a wall tile. Therefore as you can see in the following code snippet, I get the tile type of the appropriate tile and if it is not zero (since on that layer there is nothing except the wall tile) it is a collision and the player cannot move further: final Vector2 newPos = charController.move(warrior.getX(), warrior.getY()); if(!collided(newPos)) { warrior.setPosition(newPos.x, newPos.y); warrior.flip(charController.flipX(), charController.flipY()); } [..] private boolean collided(Vector2 newPos) { int row = (int) Math.floor((newPos.x / 32)); int col = (int) Math.floor((newPos.y / 32)); int tileType = tiledMap.layers.get(1).tiles[row][col]; if (tileType == 0) { return false; } return true; } The character only moves one tile with this code: If I reduce the col value by two it two more tiles. I think the problem will be around indexing, but I'm totally confused because the zero in the coordinate system of libGDX is in the bottom left corner of the screen, and I don't know the tiles array's indexing is similair or not. The size of the map is 19x21 tiles and looks like the following (the starting position of the player is marked with blue:

    Read the article

  • Help with converting an XML into a 2D level (Actionscript 3.0)

    - by inzombiak
    I'm making a little platformer and wanted to use Ogmo to create my level. I've gotten everything to work except the level that my code generates is not the same as what I see in Ogmo. I've checked the array and it fits with the level in Ogmo, but when I loop through it with my code I get the wrong thing. I've included my code for creating the level as well as an image of what I get and what I'm supposed to get. EDIT: I tried to add it, but I couldn't get it to display properly Also, if any of you know of better level editors please let me know. xmlLoader.addEventListener(Event.COMPLETE, LoadXML); xmlLoader.load(new URLRequest("Level1.oel")); function LoadXML(e:Event):void { levelXML = new XML(e.target.data); xmlFilter = levelXML.* for each (var levelTest:XML in levelXML.*) { crack = levelTest; } levelArray = crack.split(''); trace(levelArray); count = 0; for(i = 0; i <= 23; i++) { for(j = 0; j <= 35; j++) { if(levelArray[i*36+j] == 1) { block = new Platform; s.addChild(block); block.x = j*20; block.y = i*20; count++; trace(i); trace(block.x); trace(j); trace(block.y); } } } trace(count);

    Read the article

  • Can someone explain the physical architecture of RAID 10 in complete layman's terms?

    - by Hank
    I am a newbie in the world of storage and I am having a hard time digesting the physical architecture of some of the RAID levels. I am particularly interested in RAID 10, and 50. I asked the question specifically about RAID 10, because I feel if I understand that, I'll understand the other. So, I get the definition of RAID 10 - "minimum 4 disks, a striped array whose segments are mirrored". If I've got 4 disks and Disks 1 and 2 are a mirrored pair, and Disks 3 and 4 are a mirrored pair - where does the data get striped? Thanks.

    Read the article

  • how to solve ArrayList outOfBoundsExeption?

    - by iQue
    Im getting: 09-02 17:15:39.140: E/AndroidRuntime(533): java.lang.IndexOutOfBoundsException: Invalid index 1, size is 1 09-02 17:15:39.140: E/AndroidRuntime(533): at java.util.ArrayList.throwIndexOutOfBoundsException(ArrayList.java:251) when Im killing enemies using this method: private void checkCollision() { Rect h1 = happy.getBounds(); for (int i = 0; i < enemies.size(); i++) { for (int j = 0; j < bullets.size(); j++) { Rect b1 = bullets.get(j).getBounds(); Rect e1 = enemies.get(i).getBounds(); if (b1.intersect(e1)) { enemies.get(i).damageHP(5); bullets.remove(j); Log.d("TAG", "HERE: LOLTHEYTOUCHED"); } if (h1.intersect(e1)){ happy.damageHP(5); } if(enemies.get(i).getHP() <= 0){ enemies.remove(i); } if(happy.getHP() <= 0){ //end-screen !!!!!!! } } } } using this ArrayList: private ArrayList<Enemy> enemies = new ArrayList<Enemy>(); and adding to array like this: public void createEnemies() { Bitmap bmp = BitmapFactory.decodeResource(getResources(), R.drawable.female); if (enemyCounter < 24) { enemies.add(new Enemy(bmp, this, controls)); } enemyCounter++; } I dont really understand what the problem is, Ive been looking around for a while but cant really find anything that helps me. If you know or if you can link me someplace where they have a solution for a similar problem Ill be a very happy camper! Thanks for ur time.

    Read the article

  • T-SQL select where and group by date

    - by bconlon
    T-SQL has never been my favorite language, but I need to use it on a fairly regular basis and every time I seem to Google the same things. So if I add it here, it might help others with the same issues, but it will also save me time later as I will know where to look for the answers!! 1. How do I SELECT FROM WHERE to filter on a DateTime column? As it happens this is easy but I always forget. You just put the DATE value in single quotes and in standard format: SELECT StartDate FROM Customer WHERE StartDate >= '2011-01-01' ORDER BY StartDate 2. How do I then GROUP BY and get a count by StartDate? Bit trickier, but you can use the built in DATEADD and DATEDIFF to set the TIME part to midnight, allowing the GROUP BY to have a consistent value to work on: SELECT DATEADD (d, DATEDIFF(d, 0, StartDate),0) [Customer Creation Date], COUNT(*) [Number Of New Customers] FROM Customer WHERE StartDate >= '2011-01-01' GROUP BY DATEADD(d, DATEDIFF(d, 0, StartDate),0) ORDER BY [Customer Creation Date] Note: [Customer Creation Date] and [Number Of New Customers] column alias just provide more readable column headers. 3. Finally, how can you format the DATETIME to only show the DATE part (after all the TIME part is now always midnight)? The built in CONVERT function allows you to convert the DATETIME to a CHAR array using a specific format. The format is a bit arbitrary and needs looking up, but 101 is the U.S. standard mm/dd/yyyy, and 103 is the U.K. standard dd/mm/yyyy. SELECT CONVERT(CHAR(10), DATEADD(d, DATEDIFF(d, 0, StartDate),0), 103) [Customer Creation Date], COUNT(*) [Number Of New Customers] FROM Customer WHERE StartDate >= '2011-01-01' GROUP BY DATEADD(d, DATEDIFF(d, 0, StartDate),0) ORDER BY [Customer Creation Date]  #

    Read the article

  • Improving the efficiency of my bloom/glow shader

    - by user1157885
    I'm making a neon style game where everything is glowing but the glow I have is kinda small and I want to know if there's an efficient way to increase the size of it other than increasing the pixel sample iterations. Right now I have something like this: float4 glowColor = tex2D(glowSampler, uvPixel); //Makes the inital lines brighter/closer to white if (glowColor.r != 0 || glowColor.g != 0 || glowColor.b != 0) { glowColor += 0.5; } //Loops over the weights and offsets and samples from the pixels based on those numbers for (int i = 0; i < 20; i++) { glowColor += tex2D(glowSampler, uvPixel + glowOffsets[i] + 0.0018) * glowWeights[i]; } finalColor += glowColor; for the offsets it moves up, down, left and right (5 times each so it loops over 20 times) and the weights just lower the glow amount the further away it gets. The method I was using before to increase it was to increase the number of iterations from 20 to 40 and to increase the size of the offset/weight array but my computer started to have FPS drops when I was doing this so I was wondering how can I make the glow bigger/more vibrant without making it so CPU/Gcard intensive?

    Read the article

  • Permission to see the expandable list of ISA Server 2006

    - by Hossein Mobasher
    I am working on ISA Server 2006 in Windows Server. I want to add some policy rules to my server, I followed this link. But It points to In the Microsoft Internet Security and Acceleration Server 2006 management console, expand the array name, and then click the Firewall Policy node. When I open the ISA Server 2006 Management Console, I can not show the expand list, how can I force ISA to show the expandable tree to start Firewall Policy? Could any one please help me to do this ? Note : I have administrator permission for my account. Thanks in advance :)

    Read the article

  • Making fdisk see software RAID 0

    - by unknownthreat
    I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another partition. Here is the console's outputs: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sad ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So do you have an idea for how to make fdisk see my RAID array? How to make fdisk detect the Software RAID like dmraid?

    Read the article

  • How to reassign drive back into MediaShield (nvidia) RAID stripe

    - by scottwed
    So I managed to inadvertently remove the RAID configuration from 1 drive of a 2 drive stripe. I have both drives, unmodified, and undamaged. Specifically for MediaShield RAID, is there any way to reattach the 2nd drive back into the stripe? Current state is the stripe is displayed in Error status, and I have the other drive available, but unassigned. I strongly suspect there is no solution without purging the array completely and redefining the stripe, but I figured it was worth asking before I wipe out the data.

    Read the article

  • Ubuntu 12.04 and Nvidia GTX 550 Ti

    - by Jim
    OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

    Read the article

  • ReSharper 8.0 EAP now available

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

    Read the article

  • Define a Policykit action for Upstart

    - by gentakojima
    I'm trying to get some user to start, stop and reload services by using the udev Upstart interface. I'm using Ubuntu 10.04. I created the file /usr/share/polkit-1/actions/com.ubuntu.Upstart0_6.Job.policy <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE policyconfig PUBLIC "-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN" "http://www.freedesktop.org/standards/PolicyKit/1.0/policyconfig.dtd"> <policyconfig> <vendor>UXITIC</vendor> <vendor_url>http://citius.usc.es/</vendor_url> <icon_name>gdm</icon_name> <action id="com.ubuntu.Upstart0_6.Job.Stop"> <_description>Stops a service</_description> <_message>Privileges are required to stop a service.</_message> <defaults> <allow_inactive>no</allow_inactive> <allow_active>auth_admin_keep</allow_active> </defaults> </action> </policyconfig> And also the corresponding authority file /etc/polkit-1/localauthority/50-local.d/10-allow-users-to-start-and-stop-services.pkla [Stop services] Identity=unix-user:jorge Action=com.ubuntu.Upstart_0.6.Job.Stop ResultAny=no ResultInactive=no ResultActive=auth_self But when I try to stop a service, I get Access Denied :( jorge$ dbus-send --print-reply --system --dest=com.ubuntu.Upstart /com/ubuntu/Upstart/jobs/ssh com.ubuntu.Upstart0_6.Job.Stop array:string:'' boolean:true Error org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.452" (uid=1021 pid=28234 comm="dbus-send) interface="com.ubuntu.Upstart0_6.Job" member="Stop" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init"))

    Read the article

  • Falling CCSprites

    - by Coder404
    Im trying to make ccsprites fall from the top of the screen. Im planning to use a touch delegate to determine when they fall. How could I make CCSprites fall from the screen in a way like this: -(void)addTarget { Monster *target = nil; if ((arc4random() % 2) == 0) { target = [WeakAndFastMonster monster]; } else { target = [StrongAndSlowMonster monster]; } // Determine where to spawn the target along the Y axis CGSize winSize = [[CCDirector sharedDirector] winSize]; int minY = target.contentSize.height/2; int maxY = winSize.height - target.contentSize.height/2; int rangeY = maxY - minY; int actualY = (arc4random() % rangeY) + minY; // Create the target slightly off-screen along the right edge, // and along a random position along the Y axis as calculated above target.position = ccp(winSize.width + (target.contentSize.width/2), actualY); [self addChild:target z:1]; // Determine speed of the target int minDuration = target.minMoveDuration; //2.0; int maxDuration = target.maxMoveDuration; //4.0; int rangeDuration = maxDuration - minDuration; int actualDuration = (arc4random() % rangeDuration) + minDuration; // Create the actions id actionMove = [CCMoveTo actionWithDuration:actualDuration position:ccp(-target.contentSize.width/2, actualY)]; id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; // Add to targets array target.tag = 1; [_targets addObject:target]; } This code makes CCSprites move from the right side of the screen to the left. How could I change this to make the CCSprites to move from the top of the screen to the bottom?

    Read the article

  • How do Unity 12.04/Compiz bindings really work?

    - by Daniel
    There is a bewildering array of places to set bindings, all inconsistent with one another. E.g. in Unity's System Settings having the Ctrl-key highlight the mouse position is an on/off choice. I like the feature, but not on such a prominent key where I keep activating it accidentally. The keyboard shortcuts allow only one binding per command, where I might like a convenient one on the external keyboard and an emergency alternative for when I'm on the road. Keyboard custom shortcuts has a nice interface, but allows only key bindings — besides it doesn't seem to work for me. So I activated CCSM Commands. There I have the choice of key-, mouse- and/or edge bindings. Whereas some places in CCSM offers only one or two of these binding possibilities, randomly at the whim of the programmer. I have not found a way to differentiate a mouse-drag from a click. E.g. I want <SuperMouse1-drag anywhere on a window to move it, while if I don't drag, it should be raise-lower. On the title bar I want the same without needing the <Super key. Now I find raise-lower only in System Settings where I can't assign a mouse binding. If therefore in CCSM I fallback to only lower and put move on the same binding, the window already gets lowered on mouse down, and I can then invisibly move it. Very useful! I have <Altasciicircum get in the way of an Emacs binding, with some to me useless popup overlay. I can find it nowhere, so I can't turn it off. So how can I go without these frontends until they have matured, and instruct Compiz directly, for example in the way Emacs or Sawfish have keymaps, and separate ones for each context, with inheritance?

    Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >