Search Results

Search found 79317 results on 3173 pages for 'sql error messages'.

Page 594/3173 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• Ubuntu 13.04 installation issues: unable to handle kernel paging request error

  - by user173944

  I wish I could say that I’ve done more for the Linux community as of recent but I am very VERY new to all of this and I feel very much in over my head. I figured I would install Ubuntu. on my computer and then I would learn and contribute to the community simultaneously. I will try to be as detailed as I can, please ask questions if you need clarification. I installed Ubuntu. 13.04 (64-bit) on my dell Inspiron 1501. This has an AMD Turion 64-bit TL-56 1.8 Ghz mobile processor. It is a dual core. It has an ATI Radeon Xpress 1150 chipset in it as well. As of right now I only have a total of 2Ghz ram, however I was planning on upgrading that in the near future so I opted for the 64-bit Ubuntu. 13.04. I first tried the live CD and everything seemed to be functioning correctly other than the wireless (but that's not the issue at hand, there are plenty of guides on the internet on how to get that functioning). The internet worked just fine when it was plugged in so no issues there. However, once I went from that to installing 13.04 (just 13.04, no dual partitioning... I want this computer to run strictly Ubuntu.) it did not work. It took me into a shell that I could not type anything into. In this shell it said Bug: unable to handle kernel paging and then it called a bunch of traces and froze up. I had to hard reset the laptop. I tried the boot-repair program multiple times with many different settings and typically after starting up the laptop would say something along the lines of recursive errors. will attempt to fix and then it would attempt to fix a couple of things, and then the computer would freeze up after the text said end trace... so I had to hard reset it again. I'm not an impatient person either, when I say it would freeze up it would be for a period of at least 15 minutes each time before I decided to hard reset. I attempted to install 12.10 on it instead and I got the same exact message, and when I ran boot-repair it did the same exact thing as before. I am currently in the process of running memtest64+ on the computer's memory, though I really don't believe that, nor any of the hardware is at fault due to the fact that it was still running windows vista perfectly when I had decided to switch over to Ubuntu. so far the memtest has came back just fine without any errors, but I’ve only been running it for approximately an hour. So this is the situation I’m in. I did notice when I was using the live disk that the video driver needed updated so I performed that, though I’m fairly certain that has nothing to do with this. I have also attempted (though I’m not certain that my attempt was successful in accomplishing what I had planned) to manually edit the grub settings by making acpi=0 along top of adding nomodeset to the boot commands. Like I said, I’m not sure I did that correctly though, but I’m fairly certain I did. If anyone needs any more information I will be more than happy to provide it, I will post back once I get the full results of the memtest. I very much appreciate any ideas anyone else has, I’ve been at this for a few days to no avail... thank you

  Read the article

• Suggestions for accessing SQL Server from internet

  - by Ian Boyd

  i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

  Read the article

• While loop error?

  - by user134134

  I believe the problem with my code lies within my while loop. Admittedly, I'm rather new to Javascript programming. Does this look okay: <! DOCTYPE html> <head><title>title</title></head> <body> <script type="text/javascript"> alert("Hello, stranger. Please note that at this current moment, we do not have a save function. It might be a good idea to record your answers."); var preAnswer = 0; while (var preAnswer = 0) { var name = prompt("What is your name? Please capitalise it, for the sake of grammar.") if (name === "") { alert("What are you playing at? You didn't type anything."); var preAnswer = 0; } else { var preAnswer = 1 } } alert("Nice name, " + name + ", bro.") </script> </body> </html> I'm sure I've done something wrong, as it isn't functioning.

  Read the article

• Which would be a better way to load data via ajax

  - by Mike

  I am using google maps and returning html/lat/long from my MySQL database Currently A user picks a business category e.g; "Video Production". an ajax call is sent to a CodeIgniter controller the Controller then queries the db, and returns the following data via JSON Lat/Long of the marker HTML for the popup window this is approximately 34 rows in the database across two tables per business the ajax call receives this data and then plots the marker along with the html onto the map The data that is returned from the controller is one big json object... This is done for all businesses that exist in the Video Production category (currently approx 40 businesses). As you can see, pulling this data for multiple categories (100s of businesses) can get very very taxing on the server. My question is Would it be more beneficial to modify the process flow as such: a user picks a business category e.g; "Video Production". an ajax call is sent to a CodeIgniter controller the controller then queries the database for the location base information lat/long level (used to change marker icon color) This would be a single row per business with several columns the ajax call receives this data and then plots the marker on the map when the user clicks a marker an ajax call is sent to a CodeIgniter Controller the controller queries the database for the HTML and additional data based on business_id and if not, what are some better suggestions to this problem? In summary this means rather than including the HTML and additional data along for each business, only submitting minimal location information and then re-query for that information when each business marker is clicked. Potential Downsides longer load times when a user clicks a marker icon more code?? more queries to the database

  Read the article

• STOP: c000021a {Fatal System Error} The initial session process or system process terminated unexpectedly

  - by christof

  I'm encountering such an error after expanding disk space on a virtual machine using Hyper-V. STOP: c000021a {Fatal System Error} The initial session process or system process terminated unexpectedly with a status of (0x00000000) (0xc000012d 0x001003f0). The virtual server there is Windows Server 2008 R2 Enterprise Edition, which is also Domain Controller. I've tried to repair Windows but there is no restore point, and using the command line. I've tried the sfc /SCANNOW /OFFBOOTDIR /OFFWINDIR command, but I got the error Windows Resource Protection could not perform the requested operation.

  Read the article

• Adding a KPI to an SQL Server Analysis Services Cube

  Key Performance Indicators, which vary according to the application, are widely used as a measure of the performance of parts of an organisation. Analysis Services makes this KPI data easily available to your cube. All you have to do is to follow Rob Sheldon's simple instructions.

  Read the article

• Error message downloading documents

  - by Scarlet Riley

  Hi, I hope someone can help me. I have a 3 yr old MacBook Pro and lately I've been getting an error msg when I try to download something to my machine, This is what it says: Download error /Users/scarletriley/Downloads/the name of document goes here- no spaces of course! could not be opened, because an unknown error occurred. Try saving to a disk first and then opening the file. What does this mean, and what should I do to fix it? Thanks! Scarlet

  Read the article

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• storing data for maps database

  - by Timigen

  I am working on an application that displays choropleth maps. These maps are of all different types, some display state by county, country by state/province, or world by country. How should I handle storing the map information in the database? My Thoughts: I won't need to do queries to find POI inside a region, so I don't think there is a need to use spatial datatypes. I am considering storing a map as a geoJSON object (I am using JS mapping library that accepts geoJSON). The only issue is what if I want a map of the US northeast. Then I would have geoJSON for the US and a separate one for the US northeast, which would be redundant. Would it make sense to have a shape database where I had each state then when I needed a map of the US I could query for each state, and when I needed a map of the US Northeast I could again query for what I need? Note: I am not concerned with storing the data for each region, just the region itself. I will query for the data on the fly for the specific region.

  Read the article

• "Fails to get size of gamma" error when trying to set resolution

  - by Max Payne

  On 11.10 my max allowed resolution is 1024x768, while my monitor supports 1280x800 on windows. I've seen a method to solve this via xrandr, but I allways get a message saying it fails to get size of gamma. xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 640x480 60.0 Is there any other way to add 1280x800 resolution to my laptop, any workarounds this? Thanks in advance.

  Read the article

• PostgreSQL won't start anymore

  - by Sander Declerck

  Today, my PostgreSQL doesn't start anymore on my windows machine... I've tried to start the service in windows services and got the following error: Windows could not start the PostgreSQL Database Server 8.3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion. Then I went to the command line to manually start C:/Program Files (x86)/PostgreSQL/8.3/bin/psql.exe, and then I got this error: psql: Could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "???" and accepting TCP/IP connections on port 5432? Edit: I found this in the logs: 2011-04-22 13:13:16 CEST LOG: could not receive data from client: No connection could be made because the target machine actively refused it. 2011-04-22 13:13:16 CEST LOG: unexpected EOF on client connection

  Read the article

• SQL SERVER Size of Index Table for Each Index Solution 3 Powershell

  Laerte Junior If you are a Powershell user, the name of the Laerte Junior is not a new name. He is the one man with exceptional knowledge of Powershell. He is not only very knowledgeable, but also very kind and eager to those in need. I have been attempting to setup Powershell for many days, [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• SQL SERVER Size of Index Table for Each Index Solution 3 Powershell

  Laerte Junior If you are a Powershell user, the name of the Laerte Junior is not a new name. He is the one man with exceptional knowledge of Powershell. He is not only very knowledgeable, but also very kind and eager to those in need. I have been attempting to setup Powershell for many days, [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• linux build iso error

  - by Neil

  i played with linux customization and when i want to build the iso back i get this error: $ mkisofs -r -o rhel.iso -b isolinux/isolinux.bin -c isolinux/boot.cat ./ INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. Unknown file type (unallocated) ./.. - ignoring and continuing. Using RELEA000.HTM;1 for /RELEASE-NOTES-pt_BR.html (RELEASE-NOTES-U1-pt_BR.html) Size of boot image is 20 sectors -> mkisofs: Error - boot image './isolinux/isolinux.bin' has not an allowable size. i didnt change the isolinux.bin why i ahve this error?

  Read the article

• Error: type or namespace name 'AssemblyKeyFileAttribute' and 'AssemblyKeyFile' could not be found

  To associate an assembly with a strong key file to store it to GAC, we use should include following line after all the imports and before defing namespace. For VB.NET:  <Assembly: AssemblyKeyFile("c:\path\mykey.snk")> For C#:    [assembly: AssemblyKeyFile(@"c:\path\mykey.snk")] but, you might encounter following two errors at the time of creating Assembly for GAC. 1. The type or namespace name 'AssemblyKeyFileAttribute' could not be found (are you missing a using directive or an assembly reference?) 2. The type or namespace name 'AssemblyKeyFile' could not be found (are you missing a using directive or an assembly reference?) How to resolve these errors: Just include "System.Reflection" namespace. It resolve above two errors. span.fullpost {display:none;}

  Read the article

• 403 forbidden error when I attempt to install an ssh server

  - by vino suryono

  I have a problem when I try installing ssh-server on ubuntu 14.04 lts. What I've done: sudo apt-get update == succeed. sudo apt-get upgrade == succeed. sudo apt-get install ssh == failed. Notification that I got: Err http://archive.ubuntu.com/ubuntu/ trusty-update/main openssh-sftp-server i386 1:6.6p1-2buntu2 403 forbidden E: failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/o/openssh/openssh-sftp-server_6.6p1-2ubuntu2_i386.deb 403 forbidden E: Unable to fetch some archive, maybu run apt-get update or try with --fix-missing ?

  Read the article

• VPN Error 868 when connecting even if using IP address

  - by Fr33dan

  I am trying to connect to a public VPN from VPNGate. However when I attempt to connect to a VPN from the list using MS-SSTP protocol I get the following error: Error 868: The remote connection was not made because the name of the remote access server did not resolve. If I open a command prompt and ping the address in question it resolves to the IP shown on the listing. If I configure the VPN using that IP address directly I still receive the error even though the name no longer needs to resolve. This was working yesterday but it seems the VPN I was using has been removed from the list. What is happening and how can I fix it?

  Read the article

• PL/SQL Practices: "On Looping, First, and Last"

  Choose the best approach to prevent a VALUE_ERROR exception.

  Read the article

• Convenience of mySQL over xml

  - by Bonechilla

  Currently I use XML to store specific information to correctly load a few things such as a list of specfied characters, scenes and music, Once more I use JAXB in combination with standard compression/decompression(ZIP) functionality to store a list of extrenous data. This data is called to add functionality to the character, somewhat like Skills in an RPG. Each skill is seperated into its own XML file with a grandlist which contains the names of each file with their extensions omitted and zipped in folder that gets encrypted. At first using xml was working fine however as the skill list grow i worry about its stability. I was wondering if I should begin storing the data in mySQL. Originally I planned to simply convert everything to JSON over xml but i think possibly mySQL would be a better move. Can anyone inform me of the key difference and pros and cons of each I guess i'm looking for the best way to store the data more conviently and would be easier to operate on. The data is mostly primatives and strings and the only arraylist of values i have i can just concat into a single field and parse later Edit: If I am going in the right direction with XML would it make sense to convert it to JSON and use maybe Kyro or EclipseLink JAXB (MOXy)

  Read the article

• SQL Monitor and "The Cloud"

  - by Richard Mitchell

  So, how can we demo this thing? In the beginning there was a product, and it was a good product for the testers had decreed it so, and nobody argues with a tester. But then comes the inevitable question of how can somebody test it out without risk. Red Gate prides itself on the tools being easy for people to trial before they buy, and no cut down trial for you sir, oh no, for you sir only the best will do - a fully functional trial - suits you sir. The problem The problem comes when you get a...(read more)

  Read the article

• How to bypass vpn talking to VMWare Guest?

  - by marc esher

  Greetings. Network/VPN n00b question here. I'm running VMWare Workstation with a Guest Windows 2003 Server. It has SQL Server 2000 installed. The sole purpose for this Guest is to house SQL Server... it needn't have internet access or access to any other resources on the network other than the host. When launch Check Point VPN software, the host routes through the company network before it connects to the guest ... i.e. it's no longer a direct connection. I assume this is just how things are supposed to work. However, what's happening is that the connection between my host and the SQL Server instance on the guest intermittently drops. It's not consistent, and some databases on the server will be responsive while others aren't. It appears that the databases with the most traffic on the guest (the ones I'm hitting with load tests) are the ones that become intermittently unresponsive. This problem only manifests when VPN is on; when it's off, I can pound away on this database with no troubles. Thanks for any advice!

  Read the article

• Could not log-in properly but shows no error in joomla

  - by saeha

  This is what I did, I added variables in \libraries\joomla\database\table\user.php: var $img_content= null; //contains the blob type data var $img_name = null; var $img_type = null; then I added this code in \components\com_user\controller.php: $file = JRequest::getVar( 'pic', '', 'files', 'array' ); if(isset($file['name'])) { jimport('joomla.filesystem.file'); $fileName = $file['name']; $tmpName = $file['tmp_name']; $fileSize = $file['size']; $fileType = $file['type']; $fp = fopen($tmpName, 'r'); $content = fread($fp, filesize($tmpName)); //$content = addslashes($content); fclose($fp); $user->set('img_name', $fileName); $user->set('img_type', $fileType); $user->set('img_content', $content); } that works fine, but I found this problem in logging in with the new user with an uploaded photo, other user with an empty img_content field could login properly. What happens is when I log-in using the user with uploaded photo, it's not redirecting properly it just return to log-in, but when i log-in through backend using other user which is super admin, i could see that user which appears as logged in. I started saving the images in the database because I am having problem with the directory when I have uploaded the site. I think the log-in was affected by the blob type data in the database. Could that be the problem? What could be the solution? -saeha

  Read the article

• Wine installation error Ubuntu 13.04 64 bit

  - by Ocean

  Wine fails to install correctly as there apparently are unresolved dependencies. Tried through the software center and terminal. Same problem. And I can't uninstall what's installed either. I've followed steps I've found in other threads here, but they don't seem to remedy the problem. I still can't install the package completely, yet it appears in the menu, nor can I uninstall it, because the package is reported as not installed. If anyone knows what to do, I'd appreciate any help. Thanks. :)

  Read the article

• Problems Running Cherokee Web Server Admin - config_reader.c:249 - Parsing error

  - by Sebastian

  I'm running Cherokee web server 0.99.30 on (Ubuntu Hardy) and I have been having some issues getting the admin to run property. When I run sudo cherokee-admin -b Login: User: admin One-time Password: {password} Web Interface: URL: http://localhost:9090/ [20/11/2009 22:57:29.733] (error) config_reader.c:249 - Parsing error Cherokee Web Server 0.99.30 (Nov 20 2009): Listening on port ALL:9090, TLS disabled, IPv6 disabled, using epoll, 4096 fds system limit, max. 2041 connections, caching I/O, single thread When I go to the admin page I get a 503 Service Unavailable error page. Any idea about how I could fix this? Thanks

  Read the article

• Keep Your SQL Server Indexes Fragmentation Free

  Routine maintenance can keep index fragmentation to a minimum—with some help from an index-defragmenting script.

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >