Search Results

Search found 64639 results on 2586 pages for 'work stealing'.

Page 594/2586 | < Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Vagrant synced folders aren't case sensitive

  - by lvmisooners

  For our web stack, we are moving from a Windows Server to CentOS. To facilitate development, we're utilizing Vagrant to run CentOS VMs locally. We're using Vagrant's Synced Folders feature to allow devs to use their favorite IDEs on their host machine, but we're finding that one key feature is missing from this setup: file system case sensitivity. The synced folder inside the VM apparently takes on the properties of the host's file system, so if I'm developing from a Windows machine, or even OSX, the file system isn't case sensitive. This is a big issue, as our production servers will be pure CentOS, and its file system will be case sensitive. Case sensitivity is one of the main reasons we wanted to have a local VM. We want to prevent "It works on my machine!" Some workarounds we've considered or tried: Use lsyncd to sync from the vagrant share to a location within the VM that is case sensitive updating files on the host doesn't seem to generate the events in the VM that lsync listens to Make a case-sensitive partition on the host (Doesn't work for Windows) Use samba this may be an option, but we haven't vetted it yet. Is there a better way? Note that we have developers using Windows, OS X, and Ubuntu, and the solution needs to work everywhere.

  Read the article

• Access All VLANS over XenServer Interface

  - by Garrett

  For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

  Read the article

• Exchange 2003: Fresh install, couple noob questions.

  - by Eli

  Hi All, Thanks for reading! I have a small network set up for a local office here, and have a fresh install of Exchange 2003 on our sole-server PDC. The network uses one domain, call it ourdomain.net, which is DNSed locally, but not DNSed for the actual domain, so ourdomain.net works from within the network, but from outside, it's just pointed to some domain parking. I have a completely different domain, call it emaildomain.com, which is currently setup for our website and email, which is hosted with a standard hosting company. We've been using a combination of Thunderbird and Outlook (with local .pst files) for email. I've been asked to setup Exchange to work with our email, but am not familiar with it. The install seems to have gone just fine. The question is: How do I get email from a domain outside our network to work with the exchange server? Do I need to move the email for that domain to point to our local server (I so hope not!), or can I just set exchange so somehow slurp mail from the existing mailboxes on our host for that domain's mail? Or are there better ideas I don't know to ask for? Any help very appreciated - thanks!

  Read the article

• how to import mesh animation from cinema4d into blender ?

  - by George Profenza

  I need to import a mesh animation from Cinema4D into Blender. I tried to do that using Collada.The Collada 1.3 importer doesn't seem to do anything, the Collada 1.4 importer seems to work, but the animation didn't get imported into Blender. After reading this post, I tried modifying the animation nodes in the collada files, as explained in the post: <library animation> <animation> <animation> data <animation> <animation> data <animation> <animation> <library animation> to this: <library animation> <animation> data <animation> <animation> data <animation> <library animation> , but that doesn't work for me. I get an errors when the file is parsed. Any hints on how to import a mesh animation from Cinema4D into Blender ?

  Read the article

• Web based KVM management for Ubuntu

  - by Tim

  Hey all, We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim

  Read the article

• Vagrant ssh fails with VirtualBox

  - by lukewm

  vagrant up fails when it gets to the ssh part: myterminal$ vagrant up [default] VM already created. Booting if its not already running... [default] Running any VM customizations... [default] Clearing any previously set forwarded ports... [default] Forwarding ports... [default] -- ssh: 22 => 2222 (adapter 1) [default] -- db2: 30003 => 30003 (adapter 1) [default] Cleaning previously set shared folders... [default] Creating shared folders metadata... [default] Booting VM... [default] Waiting for VM to boot. This can take a few minutes. [default] Failed to connect to VM! Failed to connect to VM via SSH. Please verify the VM successfully booted by looking at the VirtualBox GUI. Then when I subsequently try and connect using vagrant ssh or vagrant reload or similar, I get this: myterminal$ vagrant reload [default] Attempting graceful shutdown of linux... SSH connection was refused! This usually happens if the VM failed to boot properly. Some steps to try to fix this: First, try reloading your VM with `vagrant reload`, since a simple restart sometimes fixes things. If that doesn't work, destroy your VM and recreate it with a `vagrant destroy` followed by a `vagrant up`. If that doesn't work, contact a Vagrant maintainer (support channels listed on the website) for more assistance. Please help! I'm really stumped. Kind regards, Luke

  Read the article

• How do you host multiple public facing websites on a VPS?

  - by pedroarvy

  We host about 30 websites using typical shared hosting plans using ASP.NET and SQL 2000/2005/2008. I am now wondering about hosting all of these websites using our own virtual private server. This is clearly cheaper but comes with a lot of questions I need answers to: Is the risk of having to keep this VPS server up and running worth it? Until now, the host provider has managed the server and we have not had to worry about crashes, downtime, software patches etc. We are not server administrators, we are programmers, so this is not really our expertise. On the other hand, it may not be hard to learn. When we make a website live, we log in to a domain management control panel and change the primary and secondary name servers to point to our shared web host: Eg ns1.sharedwebhost.com and ns2.sharedwebhost.com These name servers are going to have to change when we have a VPS. I don’t understand anything about how to set this up. Is there some useful info anyone could direct me to? Or is there software we need to install to make the primary and secondary name servers work on our VPS? The control panel we have for shared hosting comes with DNS management like this: http://www.yart.com.au/stackoverflow/dns.png What software would I need to install to create this for each site we host at a VPS? The control panel we have for shared hosting also comes with a POP email interface that allows email addresses to be added easily by our customers. Is this something that can be easily set up at a VPS so clients can manage their own email addresses? Is there software we need to install to make this work?

  Read the article

• SSI includes not working on Debian with Apache

  - by Mike

  I'm trying to get SSI to work on Debian running Apache, however the .shtml files are not being parsed. From a PHP file with phpinfo() I can see that the following show up in the loaded modules section: mod_mime_xattr mod_mime mod_mime_magic In /etc/apache2/mods-enabled/mime.conf I have (among other things): AddType text/html .shtml AddOutputFilter INCLUDES .shtml In /etc/apache2/sites-enabled/domain.com.conf (for the virtual host in question) I have: <Directory /home/username/public_html> Options +Includes allow from all AllowOverride All </Directory> and for good measure, I added the following as well: <Directory /> Options +Includes </directory> In the user's .htaccess file, I tried adding: Options +Includes AddType text/html shtml AddHandler server-parsed shtml Nothing seems to work. How can I even debug this? Edit: Here is the output of ls /etc/apache2/mods-enabled/ in case this helps actions.conf dav_svn.load proxy_balancer.load actions.load deflate.conf proxy.conf alias.conf deflate.load proxy_connect.load alias.load dir.conf proxy_http.load auth_basic.load dir.load proxy.load auth_digest.load env.load python.load authn_file.load fcgid.conf reqtimeout.conf authz_default.load fcgid.load reqtimeout.load authz_groupfile.load mime.conf rewrite.load authz_host.load mime.load ruby.load authz_user.load mime_magic.conf setenvif.conf autoindex.conf mime_magic.load setenvif.load autoindex.load mime-xattr.load ssl.conf cgi.load negotiation.conf ssl.load dav_fs.conf negotiation.load status.conf dav_fs.load php5.conf status.load dav.load php5.load suexec.load dav_svn.conf proxy_balancer.conf

  Read the article

• URL Rewriting on GoDaddy Virtual Server

  - by Aristotle

  I migrated a Kohana2 application from a shared-hosting environment over to a virtual dedicated server. After this migration, I can't seem to get my .htaccess file working again. I apologize up front, but over the years I have never experienced so much frustration with anything else as I do with the dreaded .htaccess file. Presently I have my project installed immediately within a directory in my public folder: /var/html/www/info.php (general information about server) /var/html/www/logo.jpg (some flat file) /var/html/www/somesite.com/[kohana site exists here] So my .htaccess file is within that directory, and has the following contents: # Turn on URL rewriting RewriteEngine On # Installation directory RewriteBase /somesite.com/ # Protect application and system files from being viewed # This is only necessary when these files are inside the webserver document root RewriteRule ^(application|modules|system) - [R=404,L] # Allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] # Alternativly, if the rewrite rule above does not work try this instead: #RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] This doesn't work. The initial controller is loaded, since index.php is called up implicitly when nothing else is in the url. But if I try to load up some other non-default controller, the site fails. If I place the index.php back within the url, the call to other controllers works just fine. I'm really at my wits end, and would appreciate some direction here.

  Read the article

• Why can't I reconnect to my Philips SHB9000 bluetooth headset?

  - by Thomas Eyde

  This is so annoying. When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

  Read the article

• mercurial hgwebdir error with basicauth in apache2

  - by Dio

  Hello, I'm having kind of a strange error that I'm trying to track down. I was trying to setup mercurial on my home server this weekend. I seem to have it running up to the point where I'm trying to get repositories published correctly. I'm running Ubuntu 10.04 LTS Mercurial Distributed SCM (version 1.4.3) I followed the hgwebdir guide: http://mercurial.selenic.com/wiki/HgWebDirStepByStep and everything seems to work great, I can pull and push my local repositories. Then I tried to add basic auth changing ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None </Directory> to ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None AuthType Basic AuthName hgwebdir AuthUserFile /usr/local/etc/httpd/users Require valid-user </Directory> This works exactly as I'd expect it to when I navigate to the directory via my web browser, but when I hg push get a long section repeating of File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 855, in http_error_401 url, req, headers) File "/usr/lib/python2.6/urllib2.py", line 833, in http_error_auth_reqed return self.retry_http_basic_auth(host, req, realm) File "/usr/lib/python2.6/urllib2.py", line 843, in retry_http_basic_auth return self.parent.open(req, timeout=req.timeout) followed by File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 249, in do_open self._start_transaction(h, req) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 419, in _start_transaction return keepalive.HTTPHandler._start_transaction(self, h, req) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 342, in _start_transaction h.endheaders() File "/usr/lib/python2.6/httplib.py", line 904, in endheaders self._send_output() File "/usr/lib/python2.6/httplib.py", line 776, in _send_output self.send(msg) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 247, in _sendfile connection.send(self, data) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 519, in safesend self.connect() File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 273, in connect keepalive.HTTPConnection.connect(self) RuntimeError: maximum recursion depth exceeded while calling a Python object I'm a bit at a loss on this one. I'm really not sure why adding the authorization seems to work fine via my web browser but throw these errors from hg. Any help would be greatly appreciated.

  Read the article

• Printer sharing problem (win7 / WinXP): Canon pixma USB printer

  - by Rabarberski

  For a friend, I am trying to share a USB Canon pixma ip3000 printer between two computers in his home network. But I can't get it to work due tot a Canon driver problem. The printer is connected to the Windows 7 (64 bit) computer, and we would like to be able to print from a Windows XP computer. 'Normally' it should be no problem to use Windows printer sharing, however, because one machine is 32-bit and the other is 64-bit, installing an extra driver is required. T he driver provided by canon (here) is described as a 'Canon Inkjet Printer Driver Add-On Module'. The problem is that the .inf file contained in the .exe file isn't accepted as a driver when prompted by the Printer Sharing Wizard, I suspect because it is an add-on driver (whatever that may be). I've connected and installed the printer locally on the XP machine first (which works), so that the XP machine would already know the driver when using it as a network printer, but that doesn't work; the wizard still wants a driver file. Anybody suggestions how to get this working? Maybe there is some sort of generic driver (would be OK even with limited functionality)?

  Read the article

• System Information (msinfo32.exe) Can't Collect Information

  - by ptanne

  I have Windows XP Pro, service pack 1, IE 6 and 32GB of free space, 75GB total. I have had nothing but trouble after trying to install service pack 2 even though I used System Restore. The installation was incomplete and my computer has never been the same. I attempted to install sp2 four or five times and sp3 once, always with the same result. I've tried reinstalling XP Pro but that didn't fix the problem. My XP Pro disk now has a scratch on it and refuses to work. Dell would not replace it stating that my computer was out of warranty. I'm currently trying Reimage which is supposed to return a computer to the original configuration and replace missing or damaged files. Believe it or not, Ripley, it stops in the middle of the operation and, so far, the Reimage techs haven't been able to figure out why. Of the many problems that I still have is that System Information can't collect information. The Help and Support sections that display system info also don't work. Is there some way that I can fix this? I can't afford to throw my computer away, yet. Thank you for listening, Pam Galvin

  Read the article

• Need an expert advice on *X display manager, window manager and composit manager combination

  - by fakemustache

  Hello! I have fought with myself whether or not i should ask this question but I find myself stuck and I need another expert opinion. I can't seem find the right combination of display and window manager (and composit manager). I have tried so many different combinations but most of them don't work for me. I have been working with Linux for a few years now and currently I'm running Gentoo with GDM, Openbox(stand alone, Gnome aware) and xcompmgr. But I have tried Metacity, Awesome and Fluxbox with and without Compiz, but always with GDM. What I want: A lightweight, HIGHLY configurable environment that doesn't rely on mouse-input too much (except for web browsing and image processing). At 95% I work with multiple consoles and desktops on multiple screens. What makes me ask is that most lightweight environments seem somewhat "unfinished" and show unexpected behavior quite often. And of course I want an environment that's not TOO ugly to look at as I use it at an average of 10 hours a day. :) Any thoughts? What do you use in a similar situation? Thanks for any advice! (Please excuse my english as I'm from Germany, btw greetings from Berlin ;)))

  Read the article

• Static routing on a TP-Link TL-WR1043ND

  - by igor

  My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

  Read the article

• Giving Select Windows Domain Users Symbolic Link Privilege

  - by fp0n

  I would like to setup select users on our domain to have the ability to create symbolic links on local NTFS drives and network shares without needing to run as Administrator, as part of an application with will call the CreateSymbolicLink() API directly. The default configuration for our users is to be Administrator of their computer and I think I am fighting UAC to make the privileges work the way that I want because of that. I found this link on MSDN: http://social.msdn.microsoft.com/Forums/en-SG/windowssdk/thread/fa504848-a5ea-4e84-99b7-0eb4e469cbef which describes the interaction between the SeCreateSymbolicLinkPrivilege, UAC and a domain but really does not have a solution. Here's the three options I've come up with: 1) Create a new group, give the SeCreateSymbolicLinkPrivilege to the group and assign users to the group 2) Give each individual user (2 now, more later) the privilege 3) Give the privilege to the default User group which opens it up to all Users 4) Change config so Users are not Admins by default (probably would work but not likely) Based on my testing, only 3 works for me and that is the least desirable but I've only got a local server to test with, not a domain. I need to recommend to the admin how to set this up and also have something that we can easily explain to other users of our application that are on their own domain or not on a domain. The other option seems to be to create a Service that runs with a SYSTEM account that creates the links for the application but I'd rather not go that route. Thanks.

  Read the article

• NSclient++ NRPE issues

  - by Kyle

  I have had NSclient++ working with Nagios for a while now. Recently I started testing Nagwin just to see how it would work, out of pure curiosity. I stopped checking a test server with my main Nagios config, set NSclient++ to NRPE mode, and pointed Nagwin at it. It worked great for a few hours then suddenly I started seeing "UNKNOWN: No Handler for that command." I figured it has to be Nagwin's fault since it's so new, I'll just unload NRPElistner.dll and return my server to being monitored by check_NT. However now check_NT doesn't work my main Nagios server returns timeout errors and is unable to connect at all. My Nagwin server can connect to it, the server just doesn't know how to handle the check_NRPE commands even though it did with no changes a few hours earlier. I have been working on this for a day now and am fairly certain it is NSclient++ who is to blame here. My nagwin box has successfully stayed connected to a similar server throughout the night, without any issues. And my main Nagios config is not having any problems at all. I have been able to successfully switch another server between being monitored by nagios and nagwin without any problems by simply loading and unloading the NRPE.dll. I have tried uninstalling NSclient++ and reinstalling with fresh configuration but still receive the errors. As of now the firewall is off on the server, NSclient++ is setup to accept connection from any server, there is no password, I have also turned ssl off, and the NRPE module is loaded. Any Ideas would be appreciated, I am not an advanced Nagios user but I do know my way around it and can easily break it down and set it up again. I also want to add that while in test mode NSclient++ is unable to handle check_NRPE commands there either.

  Read the article

• emacs, colors in term-mode

  - by valya

  Hello, I use Emacs and I run bash with M-x term command. There is a problem: colors in the *terminal* buffer aren't the same as in Gnome Terminal, and they are worse (do you need a screen shot?). How can I fix this? This is pretty annoying :-) Thank you! Linux Mint 9 Emacs 23.1.1 x86_64 __________________ /home/valentin/Work/buzzoola/buzzoola/test/vagrant [.../vagrant]$ echo $TERM eterm-color __________________ /home/valentin/Work/buzzoola/buzzoola/test/vagrant [.../vagrant]$ echo $LS_COLORS rs=0:di=01;34:ln=01;36:hl=44;37:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31 ;01:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31: *.arj=01;31:*.taz=01;31:*.lzh=01;31:*.lzma=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31 :*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01 ;31:*.rar=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.jpg=01;35:*.jp eg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;3 5:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.p cx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.ogm=01;35:*.mp4=01; 35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm =01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:* .xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.axv=01;35:*.anx=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00 ;36:*.au=00;36:*.flac=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*. ogg=00;36:*.ra=00;36:*.wav=00;36:*.axa=00;36:*.oga=00;36:*.spx=00;36:*.xspf=00;36:

  Read the article

• Hyper V Server 2012 Remote Management Using Workgroup

  - by Chris Kolenko

  I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

  Read the article

• VMware Fusion configuration files missing

  - by jdmuys

  I need to set up port forwarding to my VM in Fusion 5. Everywhere on the net, the solution is described as editing the file: /Library/Application Support/VMware Fusion/vmnet8/nat.conf However, on my install, that file doesn't exist. Neither does the vmnet8 directory. Here is the full content of VMware stuff I have in /Library/Application Support/: /Library/Application Support/ VMware/ VMware Fusion AdminWritable Shared vmInventory usbarb.rules VMware Fusion That's right: /Library/Application Support/VMware Fusion/ exists but is empty. And there is no VMware folder in other Library directories on my system. I am running OS X 10.8.2. I just reinstalled Fusion 5.02, no change. Meanwhile, I have 3 VMs that work just fine. So how am I supposed to set up port forwarding with Fusion 5? Thanks, JD Edit: in a hunch, I tried ps ax | grep natd which returned: 9646 ?? S 0:00.01 /Applications/VMware Fusion.app/Contents/Library/vmnet-natd -s 7 -m /Library/Preferences/VMware Fusion/vmnet8/nat.mac -c /Library/Preferences/VMware Fusion/vmnet8/nat.conf So it seems that the configurations files are now in the directory /Library/Preferences/VMware Fusion. I'll work from here and edit this question as I make progress.

  Read the article

• File is not compatible with the version of Windows you're running

  - by vaccano

  I have a really old installer (legacy app) that we are trying to get running on a Windows 7 64 bit os. Previously it has only been installed on Windows XP 32 bit. I get the following error when I try to run it: The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. Contacting the software publisher is not an option (software is super old). Is there a way to get this to work? Some sort of compatibility mode? The only thing I have heard of that will work is a Virtual XP on the Win 7 box. The problem is that this software is a part of a whole software set. I would have to put all of the pieces on the Virtual XP or none at all. Before I go down the road of putting it all on the virtual xp I would like to know that there is no way to get it all on the Win 7 os.

  Read the article

• Install MatroskaProp on Windows 7 x64

  - by Neophytos

  To see more information in Windows Explorer property pages and menus about Matroska Video (.mkv) files, similar to what one can see when selecting native Windows media (.avi, .asf, .wmv or even just plain old mpg) files, Matroska links (from http://www.matroska.org/downloads/windows.html) to a download of the MatroskaProp shell extension (http://www.jory.info/serendipity/archives/14-MatroskaProp-2.8-Released.html). It used to work for me under Windows XP 32-bit. Now I have Windows 7 x64, and downloaded, installed and ran it. Configuration and settings page is fine. But it does not seem to actually register any shell extension. Nothing is added to Explorer windows, menus or property pages when selecting .mkv or .mks files). I tried calling the register hook manually using regsvr32.dll, that again invoked the configuration window and let me set all options, and when confirming even said the registration succeeded, but seems to have had no effect. In the registry I cannot find any traces of the shell extension being installed. Can this extension be made to work under Windows 7 or x64 systems? Are there known problems with installing this or other old shell extensions on x64, or on Windows 7?

  Read the article

• IIS URL Rewrite HTTP to HTTPS with Port

  - by Andy Arismendi

  My website has two bindings: 1000 and 1443 (port 80/443 are in use by another website on the same IIS instance). Port 1000 is HTTP, port 1443 is HTTPS. What I want to do is redirect any incoming request using "htt p://server:1000" to "htt ps://server:1443". I'm playing around with IIS 7 rewrite module 2.0 but I'm banging my head against the wall. Any insight is appreciated! BTW the rewrite configuration below works great with a site that has an HTTP binding on port 80 and HTTPS binding on port 443, but it doesn't work with my ports. P.S. My URLs intentionally have spaces because the 'spam prevention mechanism' kicked in. For some reason google login doesn't work anymore so I had to create an OpenID account (No Script could be the culprit). I'm not sure how to get XML to display nicely so I added spaces after the opening brackets. < ?xml version="1.0" encoding="utf-8"? < configuration < system.webServer < rewrite < rules < rule name="HTTP to HTTPS redirect" stopProcessing="true" < match url="(.*)" / < conditions trackAllCaptures="true" < add input="{HTTPS}" pattern="off" / < /conditions < action type="Redirect" redirectType="Found" url="htt ps: // {HTTP_HOST}/{R:1}" / < /rule < /rules < /rewrite < /system.webServer < /configuration

  Read the article

• Scheduled tasks fail to start unless I'm logged in to the server

  - by Chuck

  Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

  Read the article

< Previous Page | 590 591 592 593 594 595 596 597 598 599 600 601  | Next Page >