Search Results

Search found 19308 results on 773 pages for 'network efficiency'.

Page 595/773 | < Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >

  • Uralelektrostroy Improves Turnaround Times for Engineering and Construction Projects by Approximately 50% with Better Project Data Management

    - by Melissa Centurio Lopes
    LLC Uralelektrostroy was established in 1998, to meet the growing demand for reliable energy supply, which included the deployment and operation of a modern power grid system for Russia’s booming economy and industrial sector. To rise to the challenge, the country required a company with a strong reputation and the ability to strategically operate energy production and distribution facilities. As a renowned energy expert, Uralelektrostroy successfully embarked on the mission—focusing on the design, construction, and operation of power grids, transmission lines, and generation facilities. Today, Uralelektrostroy leads the Russian utilities industry with operations across the country, particularly in the Ural, Western Siberia, and Moscow regions. Challenges: Track work progress through all engineering project development stages with ease—from planning and start-up operations, to onsite construction and quality assurance—to enhance visibility into complex projects, such as power grid and power-transmission-line construction Implement and execute engineering projects faster—for example, designing and building power generation and distribution facilities—by better monitoring numerous local subcontractors Improve alignment of project schedules with project owners’ requirements—awarding federal and regional authorities—to avoid incurring fines for missing deadlines Solutions: Used Oracle’s Primavera P6 Enterprise Project Portfolio Management 8.1 to streamline communication with customers and subcontractors through better data management and harmonized reporting, reducing construction project implementation and turnaround times by approximately 50%, on average Enabled fast generation of work-in-progress reports that track project schedules, budgets, materials, and staffing—from approval and material procurement, to construction and delivery Reduced the number of construction sites by nearly 30% (from 35 to 25) by identifying unprofitable sites—streamlining operations at the company’s construction site network and increasing profitability Improved project visibility by enabling managers to efficiently track project status, ensuring on-time reporting and punctual project deliveries to federal customers to reduce delay penalties to zero “Oracle’s Primavera P6 Enterprise Project Portfolio Management 8.1 drastically changed the way we run our business. We’ve reduced the number of redundant assets, streamlined project implementation and execution, and improved collaboration with our customers and contractors. Overall, the Oracle deployment helped to increase our profitability.” – Roman Aleksandrovich Naumenko, Head of Information Technology, LLC Uralelektrostroy Read the complete customer snapshot here.

    Read the article

  • Windows 7: how can I add an IP range in the "route" command?

    - by KeyStroke
    Hi, I'm using two network connections, and I tried using the "route" command so that when I access a specific internal IP on my LAN, it would use connection 1, anything else would go normally through connection 2 (which doesn't have access to my LAN). The problem is I have a bunch of internal IP's that I need to access, and the "route" command doesn't seem to allow me to add an IP range instead of specific IP. And connection 1 doesn't have internet access, so I can't use it as my default connection. Any idea how this can be solved? Your help is appreciated

    Read the article

  • need for tcp fine-tuning on heavily used proxy server

    - by Vijay Gharge
    Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

    Read the article

  • Filemaker Server Not Installing and Windows Problems

    - by Shelly
    When I tried installing Filemaker Server 8.0 on Windows 2003 Server Standard Edition R2, an error message pop up that states: MMC has detected an error in a snap-in. It is recommended that you shut down and restart MMC. After this message pops up, Filemaker Server freezes. I'm also having problems with openssl and running executable files, but am not sure if the 2 are related. Error message for openssl states: Openssl.exe encountered a problem and needed to close. In one of the computers connected to the network running this same Server 2003 R2, when I tried double-clicking on Dr. Web antivirus to do a scan, nothing happens. I have done this many times before reinstalling the server, and it never gave trouble before this. Any help given is appreciated.

    Read the article

  • Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

    - by den-javamaniac
    I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

    Read the article

  • Resolving host names to their domain name in an internal BIND domain

    - by Adam Plumb
    I'm setting up a domain on my home network for learning purposes, using BIND on CentOS to act as the name server. I've got the name server up and running as type master for my internal domain (plumbnicoll.family), and can do forward and reverse lookups from other computers in my LAN. For example, host office2.plumbnicoll.family correctly returns office2.plumbnicoll.family has address 192.168.1.3. What I'd like is to be able to resolve just office2 to its address, without needing to put .plumbnicoll.family at the end. Is this possible, or even desirable to do? I'm running a mixed environment at home with both Linux and Windows computers.

    Read the article

  • Can ping/nmap server, nothing else

    - by lowgain
    I was SSHed into our ubuntu LAMP server , and was just doing a svn update, which hung. I disconnected, and since then, I have not been able to SSH in or view any of our websites (neither from my network or through a remote machine). I would have just assumed the server went down, but I can ping the machine and get really quick responses. Using nmap on the box shows all the normal ports open, so I am confused This server is hosted remotely in a datacenter, do I have any remaining options except contacting them for support? Thanks!

    Read the article

  • Issue about mapping MAC address to Ipv6 address

    - by deepsky
    I know that the address in ipv6 with prefix range 001 to 111 should use a 64-bit interface identifier that follows the EUI-64 format, which translates the MAC to ipv6 as below. MAC:00-02-b3-1e-83-29 --> 02-02-b3-ff-fe-1e-83-29 --->ipv6 addr: fe80::202:b3ff:fe1e:8329 Then I checked my network status with ipconfig /all on my windows XP, but it seems my ipv6 address doesn't follow the above rule: MAC:00-24-81-XX-XX-XX ipv6 addr:2001:da8:8006:225:0:24:81XX:XXXX Obviously it doesn't follow the EUI-64 format. Instead it just directly use the MAC as the last 8 bytes. Anyone know the reason? Pls Correct me if I am wrong.

    Read the article

  • Computers displaying an unwanted password change prompt

    - by evesirim
    We run a small network of users from a central SBS 2008 server that handles group policy & AD. Most of our users operate under a policy that propts them for a password change every 6 months as a security measure, with a few administrator accounts & terminal machines not using the policy for the sake of ease as they are needed all the time. Recently all machines regardless of policy have started asking for a password change out of schedule. Some PCs run Windows 7 & some XP, though the password prompts don't seem to discriminate between OS. What could this be down to? Many thanks

    Read the article

  • Computers displaying an unwanted password change prompt

    - by evesirim
    We run a small network of users from a central SBS 2008 server that handles group policy & AD. Most of our users operate under a policy that propts them for a password change every 6 months as a security measure, with a few administrator accounts & terminal machines not using the policy for the sake of ease as they are needed all the time. Recently all machines regardless of policy have started asking for a password change out of schedule. Some PCs run Windows 7 & some XP, though the password prompts don't seem to discriminate between OS. What could this be down to? Many thanks

    Read the article

  • Custom LightDM sessions to launch an application

    - by zachtib
    I'm trying to set up Ubuntu to act as a kiosk running a custom application, and am trying to get a LightDM session built to automatically start it. Ideally, I'd like to have two sessions available from LightDM. The default would start my application fullscreened, and the other would open a minimal desktop in case any configuration (mostly connecting to a wireless network) needed to be done. I've done a lot of research over the last week on custom LightDM & Gnome sessions. I've got a custom greeter written for LightDM that can start either session, but I can't figure out how to add a specific application to the Gnome session that is ultimately started without just putting a launcher in the global startup directory, and I don't want to do that since I don't want the application starting when they open "configuration mode". Another problem I've run into on my current workaround is that the application doesn't fullscreen properly, which makes me think I'm not starting enough of a gnome session (currently it's just metacity, no panel or anything else). Edit: I found a solution. See http://www.webupd8.org/2011/11/make-applications-autostart-only-in.html

    Read the article

  • Hardware for Capturing Packets

    - by Kevin
    One of my clients is a small school district in Texas. Like any school, they often have problems with network'd peripherals such as printers, et al. It would be nice to be able to simply "listen" to what the printer and PC are saying to each other (or not saying more importantly)... The problem is that I can't find old-style "hubs" anymore, and even if I could, it's not a long-term solution. All of the devices that I have found to replicate the purpose of a simple hub are either $100+ or are difficult to throw into a networking tool kit (aka my backpack)... Now that hubs are dead, what's the new low-cost standard for simple packet capture in the networking world?

    Read the article

  • Internet connection sharing windows server 2008 R2

    - by This is it
    I have one windows server 2008 r2, and that server has 4 network interfaces (3 private, 1 internet connection). I would like to share internet connection with other 3 networks. Windows server firewall should make logs of data that is transfered. It should not be possible to connect directly to private networks from internet. How could I do it? Edit: I tried with NAT in RRAS, but it doesn't work. Here is the configuration: Server: IP private:192.168.0.1 IP public: xx.xx.xx.xx client IP:192.168.0.2 Default gateway: 192.168.0.1 Public and private interface added in NAT section of RRAS.

    Read the article

  • Exchange 2010 user not receiving mail from another user

    - by eth0
    I have an Outlook 2010 user who can't receive email from another Outlook 2010 user. They are both in the same mailbox server in the same network. They can both send and receive email to anyone else in the organization. One just can't receive from the other. It's very strange. Exchange server was recently migrated from 2007 to 2010 but one of the users described is a new hire which was created on the 2010 server. I have other new hires created on the 2010 server that work fine. I tried having the user send from OWA and it still doesn't get through. What else can I do to troubleshoot this issue? Thank you.

    Read the article

  • Installing additional printer drivers (x86) on Windows 7 (x64)

    - by ambrax
    I've successfully installed Windows 7 (x64) and drivers for my Canon MP510, and have no problem printing with this setup. There is another PC in the network running XP SP3, and I want to share the printer so that users of that PC can also print. On W7 I have the option of installing additional printer drivers for other system architectures (Itanium and x86). I've downloaded the most current 32-bit drivers for the printer, but every time I direct the install dialog to the folder containing the drivers, I get the following error message: Selected printer driver not found The specified location does not contain the driver Canon Inkjet MP510 Printer for the requested processor architecture. Retry Cancel I'm stumped. I'm absolutely certain that the specified location actually does contain the correct drivers; I've even installed them on the XP system. I've tried everything I can think of. What am I overlooking?

    Read the article

  • Is there a schematic overview of Ubuntu's architecture?

    - by joebuntu
    Hi there, as enthusiastic, advanced Linux learner, I'd love to get an overview about Linux' architecure/structure in general. You know, like "the big picture". I'm thinking of a large schematic graphic showing what is what, who is who, what system (e.g. X) comprises which subsystems (GDM/Gnome/Compiz) on the way from a to z, from boot to interactive desktop, including the most important background services (auth, network, cron, ...). Maybe a bit like this: http://www.flickr.com/photos/pgc/140859386/ but way more detailed. There's bootchart, which produces very comprehensive charts, but they again are too detailed and difficult to get the "big picture" from. Is there such a thing? Possibly not for the whole System, but maybe for single subsystems? I had trouble searching for this, because using search terms like "scheme" or "architecture" pointed to the wrong direction (a tool called "scheme" or CAD software for linux). I appreciate any links. If there's interest in those schematic overviews and links, maybe someone could turn this post into a wiki post? Cheers, joebuntu

    Read the article

  • How to specify multiple HostName/Port combinations in .ssh/config

    - by leoluk
    I have multiple notebooks and workstations which pull and push from multiple Mercurial repositories on a central server. I usually use .ssh/config to set an alias: Host repo-server HostName server.somedomain User user143 IdentityOnly yes IdentityFile ~/hgkey Port 156 ... and some more options, you get the idea. I can then simply do a hg push ssh://repo-server//hgroot/someproject on every local repository, and I can change the server address and port in one place. For workstations, this works fine, but the notebooks can access the server either from inside the network or from outside, using a different address and a different port. Is there any way I can specify multiple HostName/Port combinations so that SSH automatically tries them in order? This way, the users could push and pull without having to care about the correct address. (of course, using a VPN would be the most correct solution)

    Read the article

  • How do I get the machine name from an IP via Multicast DNS?

    - by Adam
    I have a list of IP addresses on a network, and most of them support multicast DNS. I'd like to be able to resolve the server name instead of just having the IP address. ping computer.local 64 bytes from 192.168.0.52: icmp_seq=1 ttl=64 time=5.510 ms 64 bytes from 192.168.0.52: icmp_seq=2 ttl=64 time=5.396 ms 64 bytes from 192.168.0.52: icmp_seq=3 ttl=64 time=5.273 ms Works, but I'd like to be able to determine that name from the IP. Also the devices don't necessarily broadcast any services, but definitely do support mDNS broadcast. So looking through services won't work.

    Read the article

  • ts_block.vbs and mac intosh

    - by Eric Le breton
    I am using your excellent ts_blocker, release 20120530, on my server 2008 R2 Enterprise. it works very fine, i use the vbs script, launched with wscript. The only problem is that is does not work for users attempting to connect RDP from a mac intosh. With this machine the distant IP seems to be not recognized when the login fails. The IP is visible when the login is good (event ID 4624) but not when it fails (Audit failure event ID 4625) : then the IP is not to be seen in the event log ! In the "network information" of the event log entry is nothing given. Have you already been told of that and is there something to do ?

    Read the article

  • Do TCP connections work differently within the same subnet?

    - by Dean
    I've encountered some network behaviour that confuses me while trying to get Java RMI working. I use netcat to connect to a local machine: [my_machine]$ nc -w 1 192.168.0.100 60000 && echo success success I try to do the same to my server: [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success This doesn't work, unless I explicitly listen on the server socket: [amazon_ec2]$ nc -l 60000 [my_machine]$ nc -w 1 my-servers-ip 60000 && echo success success For the version that fails, the SYN packet receives a RST, ACK in response. I'm not too knowledgable about this stuff, at this point I only have wild theories such as the one in the question. Any ideas? Potentially useful details: Local Machine (192.168.0.100) - Macbook Remote Machine (Amazon EC2) - Amazon Linux AMI 2012.03 Security Group Settings: 22 (SSH) 0.0.0.0/0 1099 0.0.0.0/0 49152-65535 0.0.0.0/0 "iptables -L" shows no rules set

    Read the article

  • Suggestions for someone wanting to become a Laptop Reseller

    - by Josh B.
    First of all, to give you a little background... I have had my Microsoft A+ for several years now. I used to run a small business repairing Xbox 360 consoles and I am currently a Network Engineer for a company in Ohio. I definitely know my way around a computer. I miss running a small business on the side and I'd like to get something going again. There is a really high demand in my area for Laptops and I was thinking about starting a small Laptop store out of my house. What is the best way to do this? I was assuming that the best way would be to buy barebones systems and build them yourself. If this is the best method, I would be very interested in any resources to get parts and such. Apparently Laptop parts aren't the easiest thing to come by (especially at a good price). Does anyone have any suggestions about how to get something like this going?

    Read the article

  • Is it possible to hide the SSID of the Windows 7 soft AP

    - by Goro
    I know it is possible to create a sofware AP in windows 7 using command prompt: netsh wlan set hostednetwork ... But is it possible to set such a network not to broadcast its SSID? I realize that this does not gain any security - or may even make the system more secure, but I am not asking about security here. I want to know if it is possible, through the netsh command interface, to hide the SSID. If my client wants to hide the SSID, then I will make them aware of security implications, but in the end it is their decision.

    Read the article

  • Cisco Router 1921

    - by mytempfw
    I'm very new in networking and I'm trying to setup my network as follow [ISP Modem/Router/Switch] + --- + {fxp0} [Linux Firewall] {fxp1} + --- + {??} [Cisco Router 1921] {GE 0/0} + --- + [Cisco Switch] + ... Servers {GE 0/1} + --- + [Cisco Switch] + ... Servers My questions are, Since I'm using both GE 0/0 and GE 0/1 ports to connect to switch, how can I connect my Linux Firewall (Port fxp1) to my Cisco Router? I know the USB and Console port are for configuration, can I use AUX port to connect my firewall (if so is it consider a right way)? Is my setup is right? if not can someone please explain to me to do the setup in right way. Link to the picture of my router: Cisco Router 1921 Thanks

    Read the article

  • Access device with local ip over internet

    - by Joe Perrin
    I apologize up front if this is the wrong place to post this question. It seemed like the best fit. I have a device which is connected to my local network which has an IP of 192.168.1.10 from my router. Additionally I use a Windows 7 machine that runs some software called DirectUpdate which allows me to resolve the local IP of the Windows 7 machine (192.168.1.5) to be accessible to the internet via my domain (example.com) - Basic dynamic DNS updating. I'd like to access the device from example.com. I am unsure how to do this as I don't have any way to install DirectUpdate (or any software) on the device to make the device available to the internet. Any insight here would be appreciated. Thank you.

    Read the article

  • Downloading a repository for local use

    - by EBV2010
    I'm trying to get Thunderbird working in such a way that it will properly work with Kolab groupware. For that I need it to be in a fixed setup of Thunderbird and add-ons (Lightning, SyncKolab) without automatic updates and I need to present version of Thunderbird to be available for the users. What I hope to achieve is that the repository for Thunderbird as it is now on http://ppa.launchpad.net/mozillateam/thunderbird-stable/ will be available on my local server so I always use that version even if Thunderbird goes to a new stable version. What I hope to achieve is this: - I copy the content of http://ppa.launchpad.net/mozillateam/thunderbird-stable/ to my server - I make it available as a repository on my network I neither know if this is possible or allowed under the license etc.

    Read the article

< Previous Page | 591 592 593 594 595 596 597 598 599 600 601 602  | Next Page >