Search Results

Search found 20208 results on 809 pages for 'window mobile'.

Page 596/809 | < Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >

• Browsing is much slower on one PC wired to the same router - why?

  - by deanalt

  Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

  Read the article

• Browser which shows what's been downloaded so far regardless of formatting and layout ?

  - by Mick

  Every now and then a website becomes super-slow (but not broken) because there are too many people looking at it at the same time. When I try and view such a site, say with Firefox, I can see that it is downloading all sorts of components of the site because of the progress information printed at the bottom of the window and I'm sitting there thinking "If only the browser would show me what it's got so far. I don't care if its a jumbled mess, I just want to see what you've got". Does any browser offer such an option?

  Read the article

• How to disable discrete GPU using NVIDIA drivers?

  - by penzoiders

  I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

  Read the article

• Alternate Client for Cisco Unified Personal Communicator protocol

  - by Jason M

  At work we have an in-house chat system using CUPC. Does anyone else out there use this? There are a few things I do not like about this client: Where's the chat log? If I close the window, I have no way of getting my conversation back. Tabbed interface? That would be nice. I hate having multiple chat windows up, having to arrange them around my desktop as more people start talking to me. I don't like that I have to use this one-off application for particular this protocol when other chat clients will handle 99% of the other protocols I use. Tell me: Is the protocol an open standard for which other applications have support? (pidgin, adium, digsby, etc.) If not, can I overcome these issues from within CUPC? Perhaps there are newer versions of the client that overcome these issues.

  Read the article

• Phantom Local Disks appearing in my drive list

  - by Paul

  I seem to have several phantom Local Disks mapped to different letters that are of 0 bytes in size. Strangely, they do not show up when I view my drives through Windows Explorer. But if I open an application such as ACDSee Pro or MS Word and then go to open a file I can see all these Local Disks mapped to different letters. This means when I plug in my external hard disk it ends up mapped to letter R instead of its usual G which messes up any programs I have pointing to it by default. How did they get there and more importantly, how do I get rid of them? I'm on a Window 7 Home Premium 32 bit machine.

  Read the article

• setting up a second monitor in centos

  - by Rob

  I have CentOS installed on my laptop. I hooked up my TV via VGA and it works, just not as I'd like it to. The left side (on the tv) is cut off, like the image is justified too far left. I want it to be centered, but I also want to use a different resolution. You see, I use a netbook, and thus my laptop screen is tiny, meaning some things cant fit in the same window without scrolling. I want my TV to fix that for me.

  Read the article

• Make symlink on Windows of whole tree without modifying the original folder

  - by DarkGhostHunter

  I'm trying to do this: make a symlink of a whole directory "C:/Master", in different folders like "C:\Projects\Alpha\", "C:\Projects\Beta\" an so on. "Master" directory usually changes in files and data. I work on the "Projects/*", where every project folder uses the "Master" files, but every one has new files in them. Let's say, I point to the car engine in every project folder, and inside them I add different kind of wheels. The problem I'm having, as a Windows 8 user, is that symlinks (junction) acts as a window to "Master" - I'm not allowed to add any file inside. I looking a way to reference the entire "Master" directory, and add new files - not edit any of the "Master" ones. It's as described here, but on Windows.

  Read the article

• Prevent Java application from accessing/monitoring/altering clipboard contents

  - by mcstrother

  I'm a student using a service that provides practice questions for standardized tests. The service requires that I access the questions by downloading and running a Java application. If I try to copy anything from any window of my computer (including applications unrelated to the question bank) while the application is running, the copied item is replaced with an obnoxious message asking me to not pirate their copyrighted material. I find this obnoxious, and I also really don't like the idea that any application can slurp up any and all potentially sensitive information that I happen to copy while it's running. Is there are a way to limit the privileges of this application to stop it from doing this? Thank you!

  Read the article

• How to revert to Eclipse's old behavior when double-clicking on frames or windows, in Juno?

  - by mattquiros

  I find Eclipse Juno very counter-intuitive. In my workspace, I used to just have the package view at the left, my code on the right, and whenever I'm printing something in the console, that's only when the console frame shows up from the bottom right. When you double click on a particular window, it either only goes fullscreen within Eclipse, or back to its original size together with the size of the other frames. In Juno, however, it seems that frames are put on layers on top of each other. When I print something to the console, the output frame only shows up as a small, useless square to my right. When I double-click, it goes full screen. When I double-click again, it occupies the full right frame, hiding my code. I double-click again and it goes full screen, then it double-clicks before it shares the right frame with my code on top of it. Then when I minimize it, it goes to the side. Any way to go back to the good old days of Eclipse? Thanks.

  Read the article

• yum update with shared cache

  - by Sammitch

  We've got a big batch of RHEL6 machines that are due for patching, and for some reason the process here does not involve a local repo. I'm new here, I've asked why, ["it just didn't work"] and I don't have enough time to make it work before the window that's already scheduled. So the usual method is to install yum-downloadonly and run yum update --downloadonly --downloaddir=/mnt/cifs_share and then yum update /mnt/cifs_share/*.rpm which just does not look right to me since not all of these machines have the same set of installed packages. The method I tried today was mounting the share to /var/cache/yum/x86_64/6Server/rhel-x86_64-server-6/packages/ which worked, but then yum automatically deleted everything once it finished. I've looked over the yum man page, but I don't see any flag I can feed it to stop it from deleting everything, nor a flag like up2date's --tmpdir=/mnt/cifs_share. Can anyone out there help me kludge this together until I can get a local repository working?

  Read the article

• How To Figure Out Your PC’s Host Name From the Command Prompt

  - by The Geek

  If you’re doing any work with networking, you probably need to know the name of your computer. Rather than diving into Control Panel, there’s a really simple way to do this from the command prompt. Note: If you haven’t already, be sure to read our complete guide to networking Windows 7 with XP and Vista. To see the hostname… all you have to do is type hostname at the command prompt. Go figure, eh? The same thing works in Linux or OS X, though you can see that most of the time the hostname is part of the prompt anyway. Note: you can also change the hostname by simply typing “hostname <newhostname>”. Of course, the easiest way to see your computer name in Windows is to just hit the Win+Break key combination, which will pop up the System pane from Control Panel.   If you want to change it instead, you can always change your computer name easily through Control Panel. Similar Articles Productive Geek Tips MySql: Give Root User Logon Permission From Any HostUse "Command Prompt Here" in Windows VistaKeyboard Ninja: Scrolling the Windows Command Prompt With Only the KeyboardVerify the Integrity of Windows Vista System FilesFind Path of Application Running on Solaris, Ubuntu, Suse or Redhat Linux TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Navigate to a virtual member from an overriden member in the derived type

  - by axrwkr

  Using visual studio, in the editor window, I am able to navigate from the usage of a member to the line and file where it is declared by pressing F12 while the cursor is over that member by or right clicking on the member and selecting "Go To Definition". I would like to find a way to navigate from an override member to the base class member that it overrides. For example, if I have the following class with one method public class SomeClass { public virtual void TheMethod() { // do something } } An I override that method somewhere else in the project or solution similar to the following public OtherClass : SomeClass { public override void TheMethod() { // do something else } } I want to navigate from the declaration of TheMethod in OtherClass to the declaration of TheMethod in SomeClass Is there a way to do this? I've found that I can find the definition of the member in the base class by pressing Shift + F12 (Find all References) and then looking through the list occurances, this works fine most of the time, since the list isn't usually that long but it would be much better to have a way to go there directly.

  Read the article

• I installed ubuntu, the installer told me to reboot afterwards. I dd, and now linux wont boot

  - by mandy

  Im trying to dual boot between mac 10.6.8 and ubuntu 11.10. I have a macbook pro 8,1. So i installed from a 10.04 disk because the install window makes more sense to me, and it doesnt give me errors or anything. Also, any versions of ubuntu after that dont boot from disk for whatever reason. (i think its having to do with the efi boot thing. i have to get ubuntu 11.10 to boot from a usb with folders bootefiboot.iso) Then my plan after that was after the ubuntu 10.04 install took care of all the swap and stuff for me without being messy, to upgrade to 11.10. So here i have 10.04 booting successfully back and forth from mac osx no problem. I put in my 11.10 usb and the installer gives me the option to "update 10.04 to 11.10" bingo, jackpot, thats what i want. Everything proceeds as normal, as EVERY OTHER install of ubuntu i have ever done, then the installer finishes and says HEY! im finished! Continue testing or reboot now! So i reboot, and what do i get??? A black screen that says the file system isnt found, to enter a boot disk and press any key. WHAT THE HELL????? so i boot the 11.10 installer again from usb, and select "erase 11.10 and install 11.10", installer proceeds normally, and asks me to reboot. I reboot and get the SAME THING. Please, someone, help me get this right here. This is my first time actually dual booting between mac and linux. Usually i just wipe off osx completely and install ubuntu but i actually need to keep my mac partition this time. I have successfully installed 11.10 on this machine before, but that was when i did a clean install. Help?

  Read the article

• What is the best way to make Calculate SHA1 as a context menu option in Mac OS X?

  - by Andrei

  In order to calculate the SHA1 checksum of a downloaded file, I could type /usr/bin/openssl sha1 in Terminal and then drag there the file which I want check. To make it simpler, one could enable a Context Menu item for this action. What is the best way to create such item in Mac OS X 10.6? A detailed answer is appreciated, because I don't have good experience with AppleScript, etc. Step by step Open Automator Create new service Choose to receive selected Files and Folders in Finder Add action Run Shell Script where your bash command is /usr/bin/openssl sha1 "$@" and you pass input as arguments How can I get the output? Preferably in a Growl pop-up or a message window/dialog.

  Read the article

• Quantify value for management

  - by nivlam

  We have two different legacy systems (window services in this case) that do exactly the same thing. Both of these systems have small differences for the different applications they serve. Both of these system's core functionality lies within a shared library. Most of the time, the updates occur in the shared library and we simply deploy the updated library to both of these systems. The systems themselves rarely change. Since both of these systems do essentially the same thing, our development team would like to consolidate these two systems into a single service. What can I do to convince management to allocate time for such a task? Some of the points I've noted are: Easier maintenance Decrease testing/QA time Unfortunately, this isn't enough. They would like us to provide them with hard numbers on the amount of hours this will save in the future and how this will speed up future development. Since most of the work is done in the shared library and the systems themselves never change, it's hard for us to quantify how many hours this will save. What kind of arguments can I make to justify the extra work to consolidate these systems?

  Read the article

• "save the changes" message after removing the protection from workbook Excel 2010

  - by abbasi

  Some time ago I protected the Excel 2010 file from the path File Protect workbook Encrypt with password and gave it a password. Now that I removed that password via below method: Open the workbook and use Save As In the lower right of the file window will be "Tools" Choose "General Options" Clear the password. Save over your old file. the file is openable without wanting a password. But the problem is when I open it and close it immediately, even without moving the active cell, the message "Do you want to save the changes you made to 'test.lsx'?" appears. While there hasn't occurred any changes to that file so why I face this message any time I want to close the file? Hasn't the file been corrupted?

  Read the article

• How are file permissions applied for shared drives?

  - by sleske

  I have two computers: A (running Windows Vista) B (running XP). I shared C: on computer A (as \\A\C ), and require a username (X) plus pw to access it. If I browse the the share \A\C on computer B, after entering username+pw I can access most folders, but one folder "\\A\C\F" gives me "permission denied". I looked at that folder's permissions on A, and it has full access permissons for all "Administrators". I use the account "A\X" to authenticate when accessing the share on A. X is a user account (on A) that is an "Administrator" according to Window's user management. Still, I cannot access this folder. If I explicitly add the "X" account to the accounts that may access folder F (under Properties / Security), I can access it without problems. I do not understand why I need to explicitly grant permission for X to get access to F. Is it not enough that X is an Administrator account?

  Read the article

• Recently reloaded computer, now have trailing effect when windows overlap

  - by Tony

  I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

  Read the article

• Game engine lib and editor

  - by luke

  I would like to know the best way/best practice to handle the following situation. Suppose the project you are working on is split in two sub-projects: game engine lib editor gui. Now, you have a method bool Method( const MethodParams &params ) that will be called during game-level initialization. So it is a method belonging to the game engine lib. Now, the parameters of this method, passed as a reference the structure MethodParams can be decided via the editor, in the level design phase. Suppose the structure is the following: enum Enum1 { E1_VAL1, E1_VAL2, }; enum Enum2 { E2_VAL1, E2_VAL2, E2_VAL3, }; struct MethodParams { float value; Enum1 e1; Enum2 e2; // some other member } The editor should present a dialog that will let the user set the MethodParams struct. A text control for the field value. Furthermore, the editor needs to let the user set the fields e1 and e2 using, for example, two combo boxes (a combo box is a window control that has a list of choices). Obviously, every enum should be mapped to a string, so the user can make an informed selection (i have used E1_VAL1 etc.., but normally the enum would be more meaningful). One could even want to map every enum to a string more informative (E1_VAL1 to "Image union algorithm", E1_VAL2 to "Image intersection algorithm" and so on...). The editor will include all the relevant game egine lib files (.h etc...), but this mapping is not automatic and i am confused on how to handle it in a way that, if in future i add E1_VAL3 and E1_VAL4, the code change will be minimal.

  Read the article

• Google Chrome pinned to Windows 7 taskbar not opening under pinned icon

  - by Slothsberry

  I have both Google Chrome and Eclipse pinned to my taskbar in Windows 7 64-Bit. However, when I launch these programs, they don't appear to open under the pinned taskbar icon Eclipse behaves similarly. The Eclipse launcher/workspace selector is under the pinned icon, but once the IDE opens, it moves from the pinned icon, to a new group at the end of the taskbar. Unpinning/repinning doesn't seem to do the trick. It's bothersome to have taskbar space wasted on both the launcher icon, and the window button. Anybody have an idea how to get normal behavior out of the taskbar?

  Read the article

• How can I make Excel documents open in different windows?

  - by Eugene

  Office 2007, Windows Server 2008 x64. How can I make Excel so that when I double-click a document, it opens in a new Excel instance, so that I can easily view them side-by-side as separate windows and not using the View-Arrange All functionality? Now I have to go to the task bar, click on one document to see it and then click on the other document in the task bar to switch to that one. As the alternative, I close one document, open a new Excel window, then drag the document in there. Thank you.

  Read the article

• High Availability

  - by mattjgilbert

  Udi Dahan presented at the UK Connected Systems User Group last night. He discussed High Availability and pointed out that people often think this is purely an infrastructure challenge. However, the implications of system crashes, errors and resulting data loss need to be considered and managed by software developers. In addition a system should remain both highly reliable (backwardly compatible) and available during deployments and upgrades. The argument is that you cannot be considered highly available if your system is always down every time you upgrade. For our recent BizTalk 2009 upgrade we made use of our Business Continuity servers (note the name, rather than calling them Disaster Recovery servers ? ) to ensure our clients could continue to operate while we upgraded the Production BizTalk servers. Then we failed back to the newly built 2009 environment and rebuilt the BC servers. Of course, in the event of an actual disaster there was a window where either one or the other set were not available to take over – however, our Staging machines were already primed to switch to production settings, having been used for testing the upgrade in the first place.   While not perfect (the failover between environments was not automatic and without some minimal outage) planning the upgrade in this way meant BizTalk was online during the rebuild and upgrade project, we didn’t have to rush things to get back on-line and planning meant we were ready to be as available as we could be in the event of an actual disaster.

  Read the article

• Is it possible to spoof the From: field in Outlook?

  - by tsvallender

  I am wondering if it is possible to change the From: field (not just the reply-to) in Outlook (specifically in the 2010 beta, but also interested in other versions). I am just moving over from Linux and am used to being able to do this quite simply in some clients. At first I thought it was the option of "Other E-Mail address" on the From drop down menu in a compose window, but that seems to do... nothing! I want to be able to do this so I can have email look like it comes from a domain I own but do not wish to run an SMTP server on.

  Read the article

• parallel to usb driver windows 7 dot matrix printer

  - by user975234

  I recently built a new Core i5 system with Windows 7 Professional. I had planned to hook up my TVS MSP 250 XL printer using a USB to parallel cable Once I plug the cable in, Windows 7 recognizes it as an IEEE-1284 controller and automatically installs the appropriate driver. However, in the status window it reports the following: "USB Printing Support -- Ready to use" "No Printer Attached -- Ready to use" When I then go ahead and manually add the printer using the "virtual printer port for USB" I can add the printer seemingly without problem. Once finished, it appears in the Devices and Printers panel. Yet, all attempts to print on this printer fail. It appears that simply no data is sent to the printer (either by programs like word or adobe or by attempting to print a test page. Does anybody know how to fix this?

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

< Previous Page | 592 593 594 595 596 597 598 599 600 601 602 603  | Next Page >