Search Results

Search found 16560 results on 663 pages for 'far'.

Page 597/663 | < Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >

  • Is it possible to change HANDLE that has been opened for synchronous I/O to be opened for asynchrono

    - by Martin Dobšík
    Dear all, Most of my daily programming work in Windows is nowadays around I/O operations of all kind (pipes, consoles, files, sockets, ...). I am well aware of different methods of reading and writing from/to different kinds of handles (Synchronous, asynchronous waiting for completion on events, waiting on file HANDLEs, I/O completion ports, and alertable I/O). We use many of those. For some of our applications it would be very useful to have only one way to treat all handles. I mean, the program may not know, what kind of handle it has received and we would like to use, let's say, I/O completion ports for all. So first I would ask: Let's assume I have a handle: HANDLE h; which has been received by my process for I/O from somewhere. Is there any easy and reliable way to find out what flags it has been created with? The main flag in question is FILE_FLAG_OVERLAPPED. The only way known to me so far, is to try to register such handle into I/O completion port (using CreateIoCompletionPort()). If that succeeds the handle has been created with FILE_FLAG_OVERLAPPED. But then only I/O completion port must be used, as the handle can not be unregistered from it without closing the HANDLE h itself. Providing there is an easy a way to determine presence of FILE_FLAG_OVERLAPPED, there would come my second question: Is there any way how to add such flag to already existing handle? That would make a handle that has been originally open for synchronous operations to be open for asynchronous. Would there be a way how to create opposite (remove the FILE_FLAG_OVERLAPPED to create synchronous handle from asynchronous)? I have not found any direct way after reading through MSDN and googling a lot. Would there be at least some trick that could do the same? Like re-creating the handle in same way using CreateFile() function or something similar? Something even partly documented or not documented at all? The main place where I would need this, is to determine the the way (or change the way) process should read/write from handles sent to it by third party applications. We can not control how third party products create their handles. Dear Windows gurus: help please! With regards Martin

    Read the article

  • CKEDITOR - Is there anyway to prevent formatting code in SOURCE mode?

    - by Lev
    I've spent the good portion of my day trying to figure this out, and I figured I'd finally just give in and ask. How can you prevent ANY automatic formatting when in SOURCE mode? I like to edit HTML source code directly instead of using the WYSIWYG interface, but whenever I write new lines, or layout tags how I would indent them, it all gets formatted when I switch to WYSIWYG mode and then back to SOURCE mode again. I stumbled upon this earlier: http://dev.fckeditor.net/ticket/993 That alluded to a setting which may have existed once upon a time which would be exactly what I'm after. I just want to know how I can completely turn off all automatic formatting when editing in SOURCE mode. After browsing this site for hours on end and finding absolutely nothing on here or on Google, I came up with a solution I thought would be foolproof (albeit not a pleasant one). I learned about the "protectedSource" setting, so I thought, well maybe I can just use that and create an HTML comment tag before all my HTML and another after it and then push a regular expression finding the comment tags into the protectedSource array, but even that (believe it or not) doesn't work. I've tried my expression straight up in the browser outside of CKEDITOR and it is working, but CKEDITOR doesn't protect the code as expected (which I suspect is a bug involving comment tags, since I can get it to work with other strings). In case you are wondering, this is what I had hoped would work as a work-around, but doesn't: config.protectedSource.push( /<!-- src -->[\s\S]*<!-- end src-->/gi ); .. and what I planned on doing (for what appears to be the lack of a setting to disable formatting in SOURCE mode) was to nest all my HTML within the commented tags like this: <!-- src --> <div>some code that shouldn't be messed with (but is)</div> <!-- end src --> I'd love to hear if you anyone has any suggestions for this scenario, or knows of a setting which I have described, or even if someone can just fill me in as to why I can't get protectedSource to work properly with two comment tags. I really thing it's gotta be a bug because I can get so many other expressions to work fine, and I can even protect HTML within the area of a single comment tag, but I simply cannot get HTML within two different comment tags to stay untouched. :( I've wasted about 6-7 hours on this so far today so if anyone can shed any light on it I would be very grateful! Thanks for reading! ;)

    Read the article

  • Why is Oracle using a skip scan for this query?

    - by Jason Baker
    Here's the tkprof output for a query that's running extremely slowly (WARNING: it's long :-) ): SELECT mbr_comment_idn, mbr_crt_dt, mbr_data_source, mbr_dol_bl_rmo_ind, mbr_dxcg_ctl_member, mbr_employment_start_dt, mbr_employment_term_dt, mbr_entity_active, mbr_ethnicity_idn, mbr_general_health_status_code, mbr_hand_dominant_code, mbr_hgt_feet, mbr_hgt_inches, mbr_highest_edu_level, mbr_insd_addr_idn, mbr_insd_alt_id, mbr_insd_name, mbr_insd_ssn_tin, mbr_is_smoker, mbr_is_vip, mbr_lmbr_first_name, mbr_lmbr_last_name, mbr_marital_status_cd, mbr_mbr_birth_dt, mbr_mbr_death_dt, mbr_mbr_expired, mbr_mbr_first_name, mbr_mbr_gender_cd, mbr_mbr_idn, mbr_mbr_ins_type, mbr_mbr_isreadonly, mbr_mbr_last_name, mbr_mbr_middle_name, mbr_mbr_name, mbr_mbr_status_idn, mbr_mpi_id, mbr_preferred_am_pm, mbr_preferred_time, mbr_prv_innetwork, mbr_rep_addr_idn, mbr_rep_name, mbr_rp_mbr_id, mbr_same_mbr_ins, mbr_special_needs_cd, mbr_timezone, mbr_upd_dt, mbr_user_idn, mbr_wgt, mbr_work_status_idn FROM (SELECT /*+ FIRST_ROWS(1) */ mbr_comment_idn, mbr_crt_dt, mbr_data_source, mbr_dol_bl_rmo_ind, mbr_dxcg_ctl_member, mbr_employment_start_dt, mbr_employment_term_dt, mbr_entity_active, mbr_ethnicity_idn, mbr_general_health_status_code, mbr_hand_dominant_code, mbr_hgt_feet, mbr_hgt_inches, mbr_highest_edu_level, mbr_insd_addr_idn, mbr_insd_alt_id, mbr_insd_name, mbr_insd_ssn_tin, mbr_is_smoker, mbr_is_vip, mbr_lmbr_first_name, mbr_lmbr_last_name, mbr_marital_status_cd, mbr_mbr_birth_dt, mbr_mbr_death_dt, mbr_mbr_expired, mbr_mbr_first_name, mbr_mbr_gender_cd, mbr_mbr_idn, mbr_mbr_ins_type, mbr_mbr_isreadonly, mbr_mbr_last_name, mbr_mbr_middle_name, mbr_mbr_name, mbr_mbr_status_idn, mbr_mpi_id, mbr_preferred_am_pm, mbr_preferred_time, mbr_prv_innetwork, mbr_rep_addr_idn, mbr_rep_name, mbr_rp_mbr_id, mbr_same_mbr_ins, mbr_special_needs_cd, mbr_timezone, mbr_upd_dt, mbr_user_idn, mbr_wgt, mbr_work_status_idn, ROWNUM AS ora_rn FROM (SELECT mbr.comment_idn AS mbr_comment_idn, mbr.crt_dt AS mbr_crt_dt, mbr.data_source AS mbr_data_source, mbr.dol_bl_rmo_ind AS mbr_dol_bl_rmo_ind, mbr.dxcg_ctl_member AS mbr_dxcg_ctl_member, mbr.employment_start_dt AS mbr_employment_start_dt, mbr.employment_term_dt AS mbr_employment_term_dt, mbr.entity_active AS mbr_entity_active, mbr.ethnicity_idn AS mbr_ethnicity_idn, mbr.general_health_status_code AS mbr_general_health_status_code, mbr.hand_dominant_code AS mbr_hand_dominant_code, mbr.hgt_feet AS mbr_hgt_feet, mbr.hgt_inches AS mbr_hgt_inches, mbr.highest_edu_level AS mbr_highest_edu_level, mbr.insd_addr_idn AS mbr_insd_addr_idn, mbr.insd_alt_id AS mbr_insd_alt_id, mbr.insd_name AS mbr_insd_name, mbr.insd_ssn_tin AS mbr_insd_ssn_tin, mbr.is_smoker AS mbr_is_smoker, mbr.is_vip AS mbr_is_vip, mbr.lmbr_first_name AS mbr_lmbr_first_name, mbr.lmbr_last_name AS mbr_lmbr_last_name, mbr.marital_status_cd AS mbr_marital_status_cd, mbr.mbr_birth_dt AS mbr_mbr_birth_dt, mbr.mbr_death_dt AS mbr_mbr_death_dt, mbr.mbr_expired AS mbr_mbr_expired, mbr.mbr_first_name AS mbr_mbr_first_name, mbr.mbr_gender_cd AS mbr_mbr_gender_cd, mbr.mbr_idn AS mbr_mbr_idn, mbr.mbr_ins_type AS mbr_mbr_ins_type, mbr.mbr_isreadonly AS mbr_mbr_isreadonly, mbr.mbr_last_name AS mbr_mbr_last_name, mbr.mbr_middle_name AS mbr_mbr_middle_name, mbr.mbr_name AS mbr_mbr_name, mbr.mbr_status_idn AS mbr_mbr_status_idn, mbr.mpi_id AS mbr_mpi_id, mbr.preferred_am_pm AS mbr_preferred_am_pm, mbr.preferred_time AS mbr_preferred_time, mbr.prv_innetwork AS mbr_prv_innetwork, mbr.rep_addr_idn AS mbr_rep_addr_idn, mbr.rep_name AS mbr_rep_name, mbr.rp_mbr_id AS mbr_rp_mbr_id, mbr.same_mbr_ins AS mbr_same_mbr_ins, mbr.special_needs_cd AS mbr_special_needs_cd, mbr.timezone AS mbr_timezone, mbr.upd_dt AS mbr_upd_dt, mbr.user_idn AS mbr_user_idn, mbr.wgt AS mbr_wgt, mbr.work_status_idn AS mbr_work_status_idn FROM mbr JOIN mbr_identfn ON mbr.mbr_idn = mbr_identfn.mbr_idn WHERE mbr_identfn.mbr_idn = mbr.mbr_idn AND mbr_identfn.identfd_type = :identfd_type_1 AND mbr_identfn.identfd_number = :identfd_number_1 AND mbr_identfn.entity_active = :entity_active_1) WHERE ROWNUM <= :ROWNUM_1) WHERE ora_rn > :ora_rn_1 call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 9936 0.46 0.49 0 0 0 0 Execute 9936 0.60 0.59 0 0 0 0 Fetch 9936 329.87 404.00 0 136966922 0 0 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 29808 330.94 405.09 0 136966922 0 0 Misses in library cache during parse: 0 Optimizer mode: FIRST_ROWS Parsing user id: 36 (JIVA_DEV) Rows Row Source Operation ------- --------------------------------------------------- 0 VIEW (cr=102 pr=0 pw=0 time=2180 us) 0 COUNT STOPKEY (cr=102 pr=0 pw=0 time=2163 us) 0 NESTED LOOPS (cr=102 pr=0 pw=0 time=2152 us) 0 INDEX SKIP SCAN IDX_MBR_IDENTFN (cr=102 pr=0 pw=0 time=2140 us)(object id 341053) 0 TABLE ACCESS BY INDEX ROWID MBR (cr=0 pr=0 pw=0 time=0 us) 0 INDEX UNIQUE SCAN PK_CLAIMANT (cr=0 pr=0 pw=0 time=0 us)(object id 334044) Rows Execution Plan ------- --------------------------------------------------- 0 SELECT STATEMENT MODE: HINT: FIRST_ROWS 0 VIEW 0 COUNT (STOPKEY) 0 NESTED LOOPS 0 INDEX MODE: ANALYZED (SKIP SCAN) OF 'IDX_MBR_IDENTFN' (INDEX (UNIQUE)) 0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'MBR' (TABLE) 0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'PK_CLAIMANT' (INDEX (UNIQUE)) ******************************************************************************** Based on my reading of Oracle's documentation of skip scans, a skip scan is most useful when the first column of an index has a low number of unique values. The thing is that the first index of this column is a unique primary key. So am I correct in assuming that a skip scan is the wrong thing to do here? Also, what kind of scan should it be doing? Should I do some more hinting for this query? EDIT: I should also point out that the query's where clause uses the columns in IDX_MBR_IDENTFN and no columns other than what's in that index. So as far as I can tell, I'm not skipping any columns.

    Read the article

  • ArrayAdapter need to be clear even i am creating a new one

    - by Roi
    Hello I'm having problems understanding how the ArrayAdapter works. My code is working but I dont know how.(http://amy-mac.com/images/2013/code_meme.jpg) I have my activity, inside it i have 2 private classes.: public class MainActivity extends Activity { ... private void SomePrivateMethod(){ autoCompleteTextView.setAdapter(new ArrayAdapter<String>(this, android.R.layout.simple_spinner_dropdown_item, new ArrayList<String>(Arrays.asList("")))); autoCompleteTextView.addTextChangedListener(new MyTextWatcher()); } ... private class MyTextWatcher implements TextWatcher { ... } private class SearchAddressTask extends AsyncTask<String, Void, String[]> { ... } } Now inside my textwatcher class i call the search address task: @Override public void afterTextChanged(Editable s) { new SearchAddressTask().execute(s.toString()); } So far so good. In my SearchAddressTask I do some stuff on doInBackground() that returns the right array. On the onPostExecute() method i try to just modify the AutoCompleteTextView adapter to add the values from the array obtained in doInBackground() but the adapter cannot be modified: NOT WORKING CODE: protected void onPostExecute(String[] addressArray) { ArrayAdapter<String> adapter = (ArrayAdapter<String>) autoCompleteDestination.getAdapter(); adapter.clear(); adapter.addAll(new ArrayList<String>(Arrays.asList(addressArray))); adapter.notifyDataSetChanged(); Log.d("SearchAddressTask", "adapter isEmpty : " + adapter.isEmpty()); // Returns true!!??! } I dont get why this is not working. Even if i run it on UI Thread... I kept investigating, if i recreate the arrayAdapter, is working in the UI (Showing the suggestions), but i still need to clear the old adapter: WORKING CODE: protected void onPostExecute(String[] addressArray) { ArrayAdapter<String> adapter = (ArrayAdapter<String>) autoCompleteDestination.getAdapter(); adapter.clear(); autoCompleteDestination.setAdapter(new ArrayAdapter<String>(NewDestinationActivity.this,android.R.layout.simple_spinner_dropdown_item, new ArrayList<String>(Arrays.asList(addressArray)))); //adapter.notifyDataSetChanged(); // no needed Log.d("SearchAddressTask", "adapter isEmpty : " + adapter.isEmpty()); // keeps returning true!!??! } So my question is, what is really happening with this ArrayAdapter? why I cannot modify it in my onPostExecute()? Why is working in the UI if i am recreating the adapter? and why i need to clear the old adapter then? I dont know there are so many questions that I need some help in here!! Thanks!!

    Read the article

  • How to store wiki sites (vcs)

    - by Eugen
    Hello, as a personal project I am trying to write a wiki with the help of django. I'm a beginner when it comes to web development. I am at the (early) point where I need to decide how to store the wiki sites. I have three approaches in mind and would like to know your suggestion. Flat files I considered a flat file approach with a version control system like git or mercurial. Firstly, I would have some example wikis to look at like http://hatta.sheep.art.pl/. Secondly, the vcs would probably deal with editing conflicts and keeping the edit history, so I would not have to reinvent the wheel. And thirdly, I could probably easily clone the wiki repository, so I (or for that matter others) can have an offline copy of the wiki. On the other hand, as far as I know, I can not use django models with flat files. Then, if I wanted to add fields to a wiki site, like a category, I would need to somehow keep a reference to that flat file in order to associate the fields in the database with the flat file. Besides, I don't know if it is a good idea to have all the wiki sites in one repository. I imagine it is more natural to have kind of like a repository per wiki site resp. file. Last but not least, I'm not sure, but I think using flat files would limit my deploying capabilities because web hosts maybe don't allow creating files (I'm thinking, for example, of Google App Engine) Storing in a database By storing the wiki sites in the database I can utilize django models and associate arbitrary fields with the wiki site. I probably would also have an easier life deploying the wiki. But I would not get vcs features like history and conflict resolving per se. I searched for django-extensions to help me and I found django-reversion. However, I do not fully understand if it fit my needs. Does it track model changes like for example if I change the django model file, or does it track the content of the models (which would fit my need). Plus, I do not see if django reversion would help me with edit conflicts. Storing a vcs repository in a database field This would be my ideal solution. It would combine the advantages of both previous approaches without the disadvantages. That is; I would have vcs features but I would save the wiki sites in a database. The problem is: I have no idea how feasible that is. I just imagine saving a wiki site/source together with a git/mercurial repository in a database field. Yet, I somehow doubt database fields work like that. So, I'm open for any other approaches but this is what I came up with. Also, if you're interested, you can find the crappy early test I'm working on here http://github.com/eugenkiss/instantwiki-test

    Read the article

  • Htaccess rewrite rule .aspx to .php

    - by Markus Ossi
    Background: I have a website that has been built with ASP.NET 2.0 and is on Windows hosting. I now have to rewrite my site in PHP and move it into Linux hosting. I have a lot of incoming links to my site from around the web that point directly into the old .aspx-pages. The site itself is very simple, one dynamic page and five static ones. I saved the static .aspx pages as .php-pages and rewrote the dynamic page in PHP. The dynamic page is called City.aspx and I have written it in PHP and it is now called City.php. On my old Windows hosting, I used ASP.NET's URL mapping for friendly URL. For example, incoming URL request for Laajakaista/Ypaja.aspx was mapped into City.aspx?CityID=981. My goal: To redirect all human visitors and search engines looking for the old .aspx pages into the new .php pages. I am thinking that the easiest way to redirect visitors into new pages will be by making a redirect, where all requests for .aspx-files will be redirected into .php filetypes. So, if someone asks for MYSITE/City.aspx?CityID=5, they will be taken into MYSITE/City.php?CityID=5 instead. However, I am having a lot of trouble getting this to work. So far this is what I have found: rewriterule ^([.]+)\.aspx$ http://www.example.com/$1.php [R=301,L] However, I think this can not handle the parameters after the filetype and I am also not quite sure what to put on front. To make things a bit more complicated, at my previous site I used friendly URL's so that I had a huge mapping file with mappings like this: <add url="~/Laajakaista/Ypaja.aspx" mappedUrl="~/City.aspx?CityID=981" /> <add url="~/Laajakaista/Aetsa.aspx" mappedUrl="~/City.aspx?CityID=988" /> <add url="~/Laajakaista/Ahtari.aspx" mappedUrl="~/City.aspx?CityID=989" /> <add url="~/Laajakaista/Aanekoski.aspx" mappedUrl="~/City.aspx?CityID=992" /> I tried to make a simple redirect like this: Redirect 301 Laajakaista/Aanekoski.aspx City.php?CityID=992 but was not able to get it to work. I ended up with an internal server error and a 50k .htaccess-file... Any help is greatly appreciated.

    Read the article

  • SSIS DTS Package flat file error - "The file name specified in the connection was not valid"

    - by MisterZimbu
    I have a pretty basic SSIS package that is attempting to read a file hosted on a share, and import its contents to a database table. The package runs fine when I run it manually within SSIS. However, when I set up a SQL Agent job and attempt to execute it, I get the following error: Executed as user: DOMAIN\UserName. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:14:17 AM Error: 2010-05-03 10:14:17.75 Code: 0xC001401E Source: DataImport Connection manager "Data File Local" Description: The file name "\10.1.1.159\llpf\datafile.dat" specified in the connection was not valid. End Error Error: 2010-05-03 10:14:17.75 Code: 0xC001401D Source: DataAnimalImport Description: Connection "Data File Local" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:14:17 AM Finished: 10:14:17 AM Elapsed: 0.594 seconds. The package execution failed. The step failed. This leads me to believe it's a permissions issue, but every attempt I've made to fix it has failed. What I've tried so far: Run as the SQL Agent account (DOMAIN\SqlAgent) - yields same error. DOMAIN\SqlAgent has "Full Control" permissions on both the share and the uploaded file. Set up a proxy account with a different account's credentials (DOMAIN\Account) - yields same error. Like above, "Full Control" permissions were given over the share to that account. Gave "Everyone" full control permissions over the share (temporarily!). Yielded same error. Manually copied the file to a local path and tested with the SQL Agent account. Worked properly. Added an ActiveX script task that would first copy the remotely hosted file to a local path, and then have the DTS package reference the local file. Gave a completely nondescriptive (even by SSIS standards) error when trying to run the script. Set up a proxy account, using my own personal account's credentials - worked correctly. However, this is not an acceptable solution as there are password policies in place on my account, as well as being a bad practice to set things up this way in general. Any ideas? I'm still convinced it's a permissions issue. However, what I've read from various searches more or less says giving the executing account permissions on the share should work. However, this is not the case here (unless I'm missing something obscure when I'm setting up permissions on the share).

    Read the article

  • What is a good dumbed-down, safe template system for PHP?

    - by Wilhelm
    (Summary: My users need to be able to edit the structure of their dynamically generated web pages without being able to do any damage.) Greetings, ladies and gentlemen. I am currently working on a service where customers from a specific demographic can create a specific type of web site and fill it with their own content. The system is written in PHP. Many of the users of this system wish to edit how their particular web site looks, or, more commonly, have a designer do it for them. Editing the CSS is fine and dandy, but sometimes that's not enough. Sometimes they want to shuffle the entire page structure around by editing the raw HTML of the dynamically created web pages. The templating system used by WordPress is, as far as I can see, perfect for my use. Except for one thing which is critically important. In addition to being able to edit how comments are displayed or where the menu goes, someone editing a template can have that template execute arbitrary PHP code. As the same codebase runs all these different sites, with all content in the same databse, allowing my users to run arbitrary code is clearly out of the question. So what I need, is a dumbed-down, idiot-proof templating system where my users can edit most of the page structure on their own, pulling in the dynamic sections wherever, without being able to even echo 1+1;. Observe the following psuedocode: <!DOCTYPE html> <title><!-- $title --></title> <!-- header() --> <!-- menu() --> <div>Some random custom crap added by the user.</div> <!-- page_content() --> That's the degree of power I'd like to grant my users. They don't need to do their own loops or calculations or anything. Just include my variables and functions and leave the rest to me. I'm sure I'm not the only person on the planet that needs something like this. Do you know of any ready-made templating systems I could use? Thanks in advance for your reply.

    Read the article

  • Publishing WCF .NET 3.5 to IIS 6 (Windows Server 2003)

    - by Adam
    I've been developing a WCF web service using .NET 3.5 with IIS7 and it works perfectly on my local computer. I tried publishing it to a server running IIS 6 and even though I can view the WSDL in my browser, the client application doesn't seem to be connecting to it correctly. I launched a packet sniffing app (Charles Proxy) and the response for the first message comes back to the client empty (0 bytes). Every message after the first one times out. The WCF service is part of a larger application that uses ASP .NET 3.5. That application has been working fine on IIS 6 for awhile now so I think it's something specific to WCF. I also tried throwing an exception in the SVC file to see if it made it that far and the exception never got thrown so I have a feeling it's something more low level that's not working. Any thoughts? Is there anything I need to install on the IIS5 server? If so how am I still able to view the WSDL in my browser? The service is being consumed via an SVC file using basicHttpBinding Here's the meat of the Web.Config (let me know if you need any other part of it): <system.net> <defaultProxy> <proxy usesystemdefault="False" proxyaddress="http://127.0.0.1:80" bypassonlocal="True"/> </defaultProxy> </system.net> ... <system.serviceModel> <services> <service name="Nexternal.Service.XMLTools.VNService" behaviorConfiguration="VNServiceBehavior"> <!--The first endpoint would be picked up from the confirg this shows how the config can be overriden with the service host--> <endpoint address="" binding="basicHttpBinding" contract="Nexternal.Service.XMLTools.IVNService" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" name="mexHttpBinding" /> </service> </services> <behaviors> <serviceBehaviors> <behavior name="VNServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> </system.serviceModel>

    Read the article

  • Perl regex matching output from `w -hs` command

    - by Bushman
    I'm trying to write a Perl script that will work better with KDE's kwrited, which, as far as I can tell, is connected to a pts and puts every line it receives through the KDE system tray notifications, with the title "KDE write daemon". Unfortunately, it makes a separate notification for each and every line, so it spams up the system tray with multiline messages on regular old write, and for some reason it cuts off the entire last line of the message when using wall (One-line messages are also goners.). I was also hoping to make it so that it could broadcast across a LAN with thick clients. Before starting on that (which would require ssh, of course), I tried to make an ssh-less version to make sure it works. Unfortunately, it doesn't. perl ./write.pl "Testing 1 2 3" where the following is the contents of ./write.pl: #!/usr/bin/perl use strict; use warnings; my $message = ""; my $device = ""; my $possibledevice = '`w -hs | grep "/usr/bin/kwrited"`'; #Where is kwrited? $possibledevice =~ s/^[^\t][\t]//; $possibledevice =~ s/[\t][^\t][\t ]\/usr\/bin\/kwrited$//; $possibledevice = '/dev/'.$possibledevice; unless ($possibledevice eq "") { $device = $possibledevice; } if ($ARGV[0] ne "") { $message = $ARGV[0]; $device = $ARGV[1]; } else { $device = $ARGV[0] unless $ARGV[0] eq ""; while (<STDIN>) { chomp; $message .= <STDIN>; } } if ($message ne "") { system "echo \'$message\' > $device"; } else { print "Error: empty message" } produces the following error: $ perl write.pl "Testing 1 2 3" Use of uninitialized value $device in concatenation (.) or string at write.pl line 29. sh: -c: line 0: syntax error near unexpected token `newline' sh: -c: line 0: `echo 'foo' > ' Somehow, the regular expressions and/or the backtick escape in processing $possibledevice are not working properly, because where kwrited is connected to /dev/pts/0, the following works perfectly: $ perl write.pl "Testing 1 2 3" /dev/pts/0

    Read the article

  • What is the best way to archive data in a relational database?

    - by GenericTypeTea
    I have a bit of an issue with a particular aspect of a program I'm working on. I need the ability to archive (fix) a table so that a change anywhere in the system will not affect the results it returns. This is the basic structure of what I need to fix: Recipe --> Recipe (as sub recipe) Recipe --> Ingredients So, if I fix a Recipe, I need to ensure all the sub recipes (including all the sub recipes sub recipes and so forth) are fixed and all its ingredients are fixed. The problem is that the sub recipe and ingredients still need to be modifiable as they are used by other recipes that are not fixed. I came up with a solution whereby I serialize (with protobuf-net) a master object that deals with the recipe and all the sub recipes and ingredients and save the archive data to a table like follows: Archive{ ReferenceId, (i.e. RecipeId) ReferenceTypeId, (i.e. Recipe) ArchiveData varbinary(max) } Now, this works great and is almost perfect... however I totally forgot (I'd love to blame the agile development mentally, however this was just short sighted) that this information needs to be reported on. As far as I'm aware I can't think how I could inflate the serialized data back into my Recipe Object and use it in a Report. I'm using the standard SQL 2005 report services at the moment. Alternatively, I guess I could do the following: Duplicate every table and tag the word "Archive" on the end of the table name. This would then give me an area of specific archive data... but ignoring my simplified example, there'd actually be about 15 tables duplicated. Add a nullable, non-foreign key property called "CopiedFromId" to every table that contains fixed data and duplicate every record that the recipe (and all it's sub recipes and all their sub recipes) touches. Create some sort of denormalised structure that could be restored from at a later date to the original, unfixed recipe. Although I think this would be like option 1 and involve a lot of extra tables. Anyway, I'm at a total loss and do not like any of the ideas particularly. Can anyone please advise the best course of action? EDIT: Or 4) Create tables specific to what the report requires and populate them with the data when the user clicks the report button? This would cause about 4 extra tables for the report in question.

    Read the article

  • PHP fopen returning null on files that work fine with include and get_file_contents

    - by brad allred
    Hi, I have XAMPP installed on a windows 2000 server. everything is working great except the PHP fopen function. I can neither create nor open files with it. the strange thing is that i can include/require/file_get_contents/other file related functions; also fopen does not generate any errors or notices it just returns NULL. I have gone as far as to grant full control of the file and all enclosing folders to everybody but i still get NULL instead of a file pointer. I have tried this on php 5.2.9, 5.2.13, and 5.3.1 with the same effect. i have gone through the php.ini file looking for something that is breaking it; i have even tried deleting and using the basic ini file from a linux box where fopen is working and still nothing. I know i have to restart apache after changing my ini and all that and have been (I have even restarted the server) so thats not it. I am at this poing assuming it is an apache configuration issue somehow, tomorrow im going to run a test through php-cli to make sure. I really don't want to bruise my head anymore over this can some apache/php wizard come to my aid? Hi guys, thanks for the responses. you are right is is not any config problem. the problem has to be with one of my dlls or one of my included files. I just tried the same code that isn't working in a new file without any include and i disabled my custom libraries and it worked. for the record here is what I was doing that wasn't working: $test_file = 'c:\\test.csv';//everybody has full control. is very large. if(file_exists($test_file) && is_readable($test_file)){ $fp = fopen($test_file, 'r'); echo var_export($fp, true);//outputs NULL. on my linux box this is a number. if($fp !== false){ //do the work fread($fp, 10);//throws the error that $fp is not a valid file handle } } something that i am including must be breaking fopen somehow. works as expected in new file with no includes.

    Read the article

  • TeamCity Scheduled Build not getting all files from VSS

    - by Kate
    Within TeamCity if I trigger a build it all works correctly, however if the Scheduler triggers a build it does not seem to get all the files from VSS. I have clean checkout directory turned on, so I am not sure how it determines the patch for the VSS root. Does anyone have any suggestions on how I can get it to always get all files, and create a new patch each time? I have put the start of two build logs below, as you can see the first one has the correct 249mb, whereas the second only transfers 2MB. The files it doesn't get from VSS seem sporadic and not in relation to what has changed. Manual Trigger [23:57:49]: Checking for changes [00:09:04]: Clean build enabled: removing old files from C:\Builds\Ab 2.0 [00:09:04]: Clearing temporary directory: C:\TeamCity\buildAgent\temp\buildTmp [00:09:05]: Checkout directory: C:\Builds\Ab 2.0 [00:09:05]: Updating sources: server side checkout... (24m:53s) [00:09:05]: [Updating sources: server side checkout...] Will perform clean checkout [00:09:05]: [Updating sources: server side checkout...] Clean checkout reasons [00:09:05]: [Clean checkout reasons] Checkout directory is empty or doesn't exist [00:09:05]: [Clean checkout reasons] "Clean all files before build" turned on [00:09:05]: [Updating sources: server side checkout...] Transferring cached clean patch for VCS root: Ab 2.0 [00:09:42]: [Updating sources: server side checkout...] Building incremental patch over the cached patch [00:31:50]: [Updating sources: server side checkout...] Transferring repository sources: 124.0Mb so far... [00:32:18]: [Updating sources: server side checkout...] Repository sources transferred: 249.46Mb total [00:32:18]: [Updating sources: server side checkout...] Average transfer speed: 183.40Kb per second Triggered by the Scheduler [07:45:01]: Checking for changes [07:55:09]: Clean build enabled: removing old files from C:\Builds\Ab 2.0 [07:55:22]: Clearing temporary directory: C:\TeamCity\buildAgent\temp\buildTmp [07:55:22]: Checkout directory: C:\Builds\Ab 2.0 [07:55:22]: Updating sources: server side checkout... (24m:24s) [07:55:22]: [Updating sources: server side checkout...] Will perform clean checkout [07:55:22]: [Updating sources: server side checkout...] Clean checkout reasons [07:55:22]: [Clean checkout reasons] Checkout directory is empty or doesn't exist [07:55:22]: [Clean checkout reasons] "Clean all files before build" turned on [07:55:22]: [Updating sources: server side checkout...] Building clean patch for VCS root: Ab 2.0 [08:19:46]: [Updating sources: server side checkout...] Transferring cached clean patch for VCS root: Ab 2.0 [08:19:47]: [Updating sources: server side checkout...] Repository sources transferred: 2.01Mb total

    Read the article

  • Hello-World-grade landscape Android app fails to start (complete code included)

    - by WingedCat
    I'm trying to develop a simple Android app, fixed in landscape mode. I am using Eclipse 1.3, compiling for Android SDK version 7 (OS version 2.1). When I try to run it in the emulator, it crashes on boot. (It gets as far as the unlock slider, but shortly after that when trying to launch the application itself, I get "The application Failtest (process com.wcs.failtest) has stopped unexpectedly. Please try again.".) Here is main.xml (with the tags escaped so this displays properly): <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="horizontal" android:layout_width="480px" android:layout_height="320px" > <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="96px" android:layout_height="320px" android:id="@+id/action_menu" > <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="horizontal" android:layout_width="96px" android:layout_height="48px" > <Button android:layout_width="48px" android:layout_height="48px" android:background="#f00" android:id="@+id/action_button_11" /> </LinearLayout> </LinearLayout> </LinearLayout> Here is AndroidManifest.xml (again with the tags escaped so this displays properly): <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.wcs.failtest" android:versionCode="1" android:versionName="1.0"> <application android:icon="@drawable/icon" android:label="@string/app_name" android:theme="@android:style/Theme.NoTitleBar.Fullscreen"> <activity android:name=".FailtestActivity" android:screenOrientation="landscape" android:label="@string/app_name"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> <uses-sdk android:minSdkVersion="7" /> </manifest> And here is FailtestActivity.java: package com.wcs.failtest; import android.app.Activity; import android.os.Bundle; import android.widget.Button; import android.view.View.OnClickListener; import android.view.View; public class FailtestActivity extends Activity { private OnClickListener action11Listener = new OnClickListener() { public void onClick(View v) { } }; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); Button button; button = (Button)findViewById(R.id.action_button_11); button.setOnClickListener(action11Listener); setContentView(R.layout.main); } } I suspect it is something simple I'm overlooking. What is it?

    Read the article

  • MBR Booting from DOS

    - by eflukx
    For a project I would like to invoke the MBR on the first harddisk directly from DOS. I've written a small assembler program that loads the MBR in memory at 0:7c00h an does a far jump to it. I've put my util on a bootable floppy. The disk (HD0, 0x80) i'm trying to boot has a TrueCrypt boot loader on it. It shows up the TrueCrypt screen, but after typing in the password it crashes the system. When I run my little utlility (w00t.com) on a normal WinXP machine it seams to crash immedealty. Apparently I'm forgetting some crucial stuff the BIOS normally does, my guess is it's something trivial. Can someone with better bare-metal DOS and BIOS experience help me out? Heres my code: .MODEL tiny .386 _TEXT SEGMENT USE16 INCLUDE BootDefs.i ORG 100h start: ; http://vxheavens.com/lib/vbw05.html ; Before DOS has booted the BIOS stores the amount of usable lower memory ; in a word located at 0:413h in memory. We going to erase this value because ; we have booted dos before loading the bootsector, and dos is fat (and ugly). ; fake free memory ;push ds ;push 0 ;pop ds ;mov ax, TC_BOOT_LOADER_SEGMENT / 1024 * 16 + TC_BOOT_MEMORY_REQUIRED ;mov word ptr ds:[413h], ax ;ax = memory in K ;pop ds ;lea si, memory_patched_msg ;call print ;mov ax, cs mov ax, 0 mov es, ax ; read first sector to es:7c00h (== cs:7c00) mov dl, 80h mov cl, 1 mov al, 1 mov bx, 7c00h ;load sector to es:bx call read_sectors lea si, mbr_loaded_msg call print lea si, jmp_to_mbr_msg call print ;Set BIOS default values in environment cli mov dl, 80h ;(drive C) xor ax, ax mov ds, ax mov es, ax mov ss, ax mov sp, 0ffffh sti push es push 7c00h retf ;Jump to MBR code at 0:7c00h ; Print string print: xor bx, bx mov ah, 0eh cld @@: lodsb test al, al jz print_end int 10h jmp @B print_end: ret ; Read sectors of the first cylinder read_sectors: mov ch, 0 ; Cylinder mov dh, 0 ; Head ; DL = drive number passed from BIOS mov ah, 2 int 13h jnc read_ok lea si, disk_error_msg call print read_ok: ret memory_patched_msg db 'Memory patched', 13, 10, 7, 0 mbr_loaded_msg db 'MBR loaded', 13, 10, 7, 0 jmp_to_mbr_msg db 'Jumping to MBR code', 13, 10, 7, 0 disk_error_msg db 'Disk error', 13, 10, 7, 0 _TEXT ENDS END start

    Read the article

  • How do gitignore exclusion rules actually work?

    - by meowsqueak
    I'm trying to solve a gitignore problem on a large directory structure, but to simplify my question I have reduced it to the following. I have the following directory structure of two files (foo, bar) in a brand new git repository (no commits so far): a/b/c/foo a/b/c/bar Obviously, a 'git status -u' shows: # Untracked files: ... # a/b/c/bar # a/b/c/foo What I want to do is create a .gitignore file that ignores everything inside a/b/c but does not ignore the file 'foo'. If I create a .gitignore thus: c/ Then a 'git status -u' shows both foo and bar as ignored: # Untracked files: ... # .gitignore Which is as I expect. Now if I add an exclusion rule for foo, thus: c/ !foo According to the gitignore manpage, I'd expect this to to work. But it doesn't - it still ignores foo: # Untracked files: ... # .gitignore This doesn't work either: c/ !a/b/c/foo Neither does this: c/* !foo Gives: # Untracked files: ... # .gitignore # a/b/c/bar # a/b/c/foo In that case, although foo is no longer ignored, bar is also not ignored. The order of the rules in .gitignore doesn't seem to matter either. This also doesn't do what I'd expect: a/b/c/ !a/b/c/foo That one ignores both foo and bar. One situation that does work is if I create the file a/b/c/.gitignore and put in there: * !foo But the problem with this is that eventually there will be other subdirectories under a/b/c and I don't want to have to put a separate .gitignore into every single one - I was hoping to create 'project-based' .gitignore files that can sit in the top directory of each project, and cover all the 'standard' subdirectory structure. This also seems to be equivalent: a/b/c/* !a/b/c/foo This might be the closest thing to "working" that I can achieve, but the full relative paths and explicit exceptions need to be stated, which is going to be a pain if I have a lot of files of name 'foo' in different levels of the subdirectory tree. Anyway, either I don't quite understand how exclusion rules work, or they don't work at all when directories (rather than wildcards) are ignored - by a rule ending in a / Can anyone please shed some light on this? Is there a way to make gitignore use something sensible like regular expressions instead of this clumsy shell-based syntax? I'm using and observe this with git-1.6.6.1 on Cygwin/bash3 and git-1.7.1 on Ubuntu/bash3.

    Read the article

  • TcpListener is queuing connections faster than I can clear them

    - by Matthew Brindley
    As I understand it, TcpListener will queue connections once you call Start(). Each time you call AcceptTcpClient (or BeginAcceptTcpClient), it will dequeue one item from the queue. If we load test our TcpListener app by sending 1,000 connections to it at once, the queue builds far faster than we can clear it, leading (eventually) to timeouts from the client because it didn't get a response because its connection was still in the queue. However, the server doesn't appear to be under much pressure, our app isn't consuming much CPU time and the other monitored resources on the machine aren't breaking a sweat. It feels like we're not running efficiently enough right now. We're calling BeginAcceptTcpListener and then immediately handing over to a ThreadPool thread to actually do the work, then calling BeginAcceptTcpClient again. The work involved doesn't seem to put any pressure on the machine, it's basically just a 3 second sleep followed by a dictionary lookup and then a 100 byte write to the TcpClient's stream. Here's the TcpListener code we're using: // Thread signal. private static ManualResetEvent tcpClientConnected = new ManualResetEvent(false); public void DoBeginAcceptTcpClient(TcpListener listener) { // Set the event to nonsignaled state. tcpClientConnected.Reset(); listener.BeginAcceptTcpClient( new AsyncCallback(DoAcceptTcpClientCallback), listener); // Wait for signal tcpClientConnected.WaitOne(); } public void DoAcceptTcpClientCallback(IAsyncResult ar) { // Get the listener that handles the client request, and the TcpClient TcpListener listener = (TcpListener)ar.AsyncState; TcpClient client = listener.EndAcceptTcpClient(ar); if (inProduction) ThreadPool.QueueUserWorkItem(state => HandleTcpRequest(client, serverCertificate)); // With SSL else ThreadPool.QueueUserWorkItem(state => HandleTcpRequest(client)); // Without SSL // Signal the calling thread to continue. tcpClientConnected.Set(); } public void Start() { currentHandledRequests = 0; tcpListener = new TcpListener(IPAddress.Any, 10000); try { tcpListener.Start(); while (true) DoBeginAcceptTcpClient(tcpListener); } catch (SocketException) { // The TcpListener is shutting down, exit gracefully CheckBuffer(); return; } } I'm assuming the answer will be related to using Sockets instead of TcpListener, or at least using TcpListener.AcceptSocket, but I wondered how we'd go about doing that? One idea we had was to call AcceptTcpClient and immediately Enqueue the TcpClient into one of multiple Queue<TcpClient> objects. That way, we could poll those queues on separate threads (one queue per thread), without running into monitors that might block the thread while waiting for other Dequeue operations. Each queue thread could then use ThreadPool.QueueUserWorkItem to have the work done in a ThreadPool thread and then move onto dequeuing the next TcpClient in its queue. Would you recommend this approach, or is our problem that we're using TcpListener and no amount of rapid dequeueing is going to fix that?

    Read the article

  • How to use objetcs as modules/functors in Scala?

    - by Jeff
    Hi. I want to use object instances as modules/functors, more or less as shown below: abstract class Lattice[E] extends Set[E] { val minimum: E val maximum: E def meet(x: E, y: E): E def join(x: E, y: E): E def neg(x: E): E } class Calculus[E](val lat: Lattice[E]) { abstract class Expr case class Var(name: String) extends Expr {...} case class Val(value: E) extends Expr {...} case class Neg(e1: Expr) extends Expr {...} case class Cnj(e1: Expr, e2: Expr) extends Expr {...} case class Dsj(e1: Expr, e2: Expr) extends Expr {...} } So that I can create a different calculus instance for each lattice (the operations I will perform need the information of which are the maximum and minimum values of the lattice). I want to be able to mix expressions of the same calculus but not be allowed to mix expressions of different ones. So far, so good. I can create my calculus instances, but problem is that I can not write functions in other classes that manipulate them. For example, I am trying to create a parser to read expressions from a file and return them; I also was trying to write an random expression generator to use in my tests with ScalaCheck. Turns out that every time a function generates an Expr object I can't use it outside the function. Even if I create the Calculus instance and pass it as an argument to the function that will in turn generate the Expr objects, the return of the function is not recognized as being of the same type of the objects created outside the function. Maybe my english is not clear enough, let me try a toy example of what I would like to do (not the real ScalaCheck generator, but close enough). def genRndExpr[E](c: Calculus[E], level: Int): Calculus[E]#Expr = { if (level > MAX_LEVEL) { val select = util.Random.nextInt(2) select match { case 0 => genRndVar(c) case 1 => genRndVal(c) } } else { val select = util.Random.nextInt(3) select match { case 0 => new c.Neg(genRndExpr(c, level+1)) case 1 => new c.Dsj(genRndExpr(c, level+1), genRndExpr(c, level+1)) case 2 => new c.Cnj(genRndExpr(c, level+1), genRndExpr(c, level+1)) } } } Now, if I try to compile the above code I get lots of error: type mismatch; found : plg.mvfml.Calculus[E]#Expr required: c.Expr case 0 = new c.Neg(genRndExpr(c, level+1)) And the same happens if I try to do something like: val boolCalc = new Calculus(Bool) val e1: boolCalc.Expr = genRndExpr(boolCalc) Please note that the generator itself is not of concern, but I will need to do similar things (i.e. create and manipulate calculus instance expressions) a lot on the rest of the system. Am I doing something wrong? Is it possible to do what I want to do? Help on this matter is highly needed and appreciated. Thanks a lot in advance.

    Read the article

  • Trouble using CollectionViewSource in Silverlight

    - by Johnny
    Hi, I having some trouble when implementing the CollectionViewSource in silverlight. I'm new in this topic, so basically I've been following what I find searching through the web. Here's what I've been trying to do so far. I'm creating a CollectionViewSource in the resources tag: <UserControl.Resources> <CollectionViewSource x:Key="TestCVS"> <CollectionViewSource.SortDescriptions> <scm:SortDescription PropertyName="Value" Direction="Ascending" /> </CollectionViewSource.SortDescriptions> </CollectionViewSource> </UserControl.Resources> Then I'm binding my TestCVS in a HierarchicalDataTemplate: <common:HierarchicalDataTemplate ItemsSource="{Binding Source={StaticResource TestCVS}}"> <common:HierarchicalDataTemplate.ItemTemplate> <common:HierarchicalDataTemplate> <Border BorderBrush="#FF464646" BorderThickness="1" CornerRadius="3" Padding="5"> <Grid> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="*"/> </Grid.ColumnDefinitions> <StackPanel Orientation="Horizontal" HorizontalAlignment="Left"> <TextBlock TextWrapping="Wrap" Text="{Binding MyClassField}"/> </StackPanel> </Grid> </Border> </common:HierarchicalDataTemplate> </common:HierarchicalDataTemplate.ItemTemplate> </common:HierarchicalDataTemplate> Now, in the code behind I'm assigning the Source for the TestCVS in a property, like this: private ObservableCollection<MyClass> _MyClass; public ObservableCollection<MyClass> MyClass { get { return _MyClass; } set { var testCVS = (this.Resources["TestCVS"] as CollectionViewSource); if (testCVS != null) testCVS.Source = value; } } After testing this I realize that the information is not showing on screen and I don't really know why, can anyone help me on this matter? Hope this makes any sense, thanks in advance!

    Read the article

  • Subclassing a window from a thread in c#

    - by user258651
    I'm creating a thread that looks for a window. When it finds the window, it overrides its windowproc, and handles WM_COMMAND and WM_CLOSE. Here's the code that looks for the window and subclasses it: public void DetectFileDialogProc() { Window fileDialog = null; // try to find the dialog twice, with a delay of 500 ms each time for (int attempts = 0; fileDialog == null && attempts < 2; attempts++) { // FindDialogs enumerates all windows of class #32770 via an EnumWindowProc foreach (Window wnd in FindDialogs(500)) { IntPtr parent = NativeMethods.User32.GetParent(wnd.Handle); if (parent != IntPtr.Zero) { // we're looking for a dialog whose parent is a dialog as well Window parentWindow = new Window(parent); if (parentWindow.ClassName == NativeMethods.SystemWindowClasses.Dialog) { fileDialog = wnd; break; } } } } // if we found the dialog if (fileDialog != null) { OldWinProc = NativeMethods.User32.GetWindowLong(fileDialog.Handle, NativeMethods.GWL_WNDPROC); NativeMethods.User32.SetWindowLong(fileDialog.Handle, NativeMethods.GWL_WNDPROC, Marshal.GetFunctionPointerForDelegate(new WindowProc(WndProc)).ToInt32()); } } And the windowproc: public IntPtr WndProc(IntPtr hWnd, uint msg, IntPtr wParam, IntPtr lParam) { lock (this) { if (!handled) { if (msg == NativeMethods.WM_COMMAND || msg == NativeMethods.WM_CLOSE) { // adding to a list. i never access the window via the hwnd from this list, i just treat it as a number _addDescriptor(hWnd); handled = true; } } } return NativeMethods.User32.CallWindowProc(OldWinProc, hWnd, msg, wParam, lParam); } This all works well under normal conditions. But I am seeing two instances of bad behavior in order of badness: If I do not close the dialog within a minute or so, the app crashes. Is this because the thread is getting garbage collected? This would kind of make sense, as far as GC can tell the thread is done? If this is the case, (and I don't know that it is), how can I make the thread stay around as long as the dialog is around? If I immediately close the dialog with the 'X' button (WM_CLOSE) the app crashes. I believe its crashing in the windowproc, but I can't get a breakpoint in there. I'm getting an AccessViolationException, The exception says "Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Its a race condition, but of what I don't know. FYI, I had been reseting the old windowproc once I processed the commands, but that was crashing even more often! Any ideas on how I can solve these issues?

    Read the article

  • Ultimate Get/Post with Android Thread for Dummies

    - by Jayomat
    Hi, I'm writing an app to check for the bus timetable's. Therefor I need to post some data to a html page, submit it, and parse the resulting page with htmlparser. Though it may be asked a lot, can some one help me identify if 1) this page does support post/get (I think it does) 2) which fields I need to use? 3) How to make the actual request? this is my code so far: String url = "http://busspur02.aseag.de/bs.exe?Cmd=RV&Karten=true&DatumT=30&DatumM=4&DatumJ=2010&ZeitH=&ZeitM=&Suchen=%28S%29uchen&GT0=&HT0=&GT1=&HT1="; String charset = "CP1252"; System.out.println("startFrom: "+start_from); System.out.println("goTo: "+destination); //String tag.v List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("HTO", start_from)); params.add(new BasicNameValuePair("HT1", destination)); params.add(new BasicNameValuePair("GTO", "Aachen")); params.add(new BasicNameValuePair("GT1", "Aachen")); params.add(new BasicNameValuePair("DatumT", day)); params.add(new BasicNameValuePair("DatumM", month)); params.add(new BasicNameValuePair("DatumJ", year)); params.add(new BasicNameValuePair("ZeitH", hour)); params.add(new BasicNameValuePair("ZeitM", min)); UrlEncodedFormEntity query = new UrlEncodedFormEntity(params, charset); HttpPost post = new HttpPost(url); post.setEntity(query); InputStream response = new DefaultHttpClient().execute(post).getEntity().getContent(); // Now do your thing with the facebook response. String source = readText(response,"CP1252"); Log.d(TAG_AVV,response.toString()); System.out.println("STREAM "+source); One person also gave me a hint to use firebug to read what's going on at the page, but I don't really understand what to look for, or more precisely, how to use the provided information. I also find it confusing, for example, that when I enter the data by hand, the url says, for example, "....HTO=Kaiserplatz&...", but in Firebug, the same Kaiserplatz is connected to a different field, in this case: \<\td class="Start3" Kaiserplatz <\/td (I inserted \ to make it visible) The last line in my code prints the html page, but without having send a request.. it's printed as if there was no input at all... My app is almost done, I hope someone can help me out to finish it! thanks in advance

    Read the article

  • Why is it still so hard to write software?

    - by nornagon
    Writing software, I find, is composed of two parts: the Idea, and the Implementation. The Idea is about thinking: "I have this problem; how do I solve it?" and further, "how do I solve it elegantly?" The answers to these questions are obtainable by thinking about algorithms and architecture. The ideas come partially through analysis and partially through insight and intuition. The Idea is usually the easy part. You talk to your friends and co-workers and you nut it out in a meeting or over coffee. It takes an hour or two, plus revisions as you implement and find new problems. The Implementation phase of software development is so difficult that we joke about it. "Oh," we say, "the rest is a Simple Matter of Code." Because it should be simple, but it never is. We used to write our code on punch cards, and that was hard: mistakes were very difficult to spot, so we had to spend extra effort making sure every line was perfect. Then we had serial terminals: we could see all our code at once, search through it, organise it hierarchically and create things abstracted from raw machine code. First we had assemblers, one level up from machine code. Mnemonics freed us from remembering the machine code. Then we had compilers, which freed us from remembering the instructions. We had virtual machines, which let us step away from machine-specific details. And now we have advanced tools like Eclipse and Xcode that perform analysis on our code to help us write code faster and avoid common pitfalls. But writing code is still hard. Writing code is about understanding large, complex systems, and tools we have today simply don't go very far to help us with that. When I click "find all references" in Eclipse, I get a list of them at the bottom of the window. I click on one, and I'm torn away from what I was looking at, forced to context switch. Java architecture is usually several levels deep, so I have to switch and switch and switch until I find what I'm really looking for -- by which time I've forgotten where I came from. And I do that all day until I've understood a system. It's taxing mentally, and Eclipse doesn't do much that couldn't be done in 1985 with grep, except eat hundreds of megs of RAM. Writing code has barely changed since we were staring at amber on black. We have the theoretical groundwork for much more advanced tools, tools that actually work to help us comprehend and extend the complex systems we work with every day. So why is writing code still so hard?

    Read the article

  • Tunnel over HTTPS

    - by ephemient
    At my workplace, the traffic blocker/firewall has been getting progressively worse. I can't connect to my home machine on port 22, and lack of ssh access makes me sad. I was previously able to use SSH by moving it to port 5050, but I think some recent filters now treat this traffic as IM and redirect it through another proxy, maybe. That's my best guess; in any case, my ssh connections now terminate before I get to log in. These days I've been using Ajaxterm over HTTPS, as port 443 is still unmolested, but this is far from ideal. (Sucky terminal emulation, lack of port forwarding, my browser leaks memory at an amazing rate...) I tried setting up mod_proxy_connect on top of mod_ssl, with the idea that I could send a CONNECT localhost:22 HTTP/1.1 request through HTTPS, and then I'd be all set. Sadly, this seems to not work; the HTTPS connection works, up until I finish sending my request; then SSL craps out. It appears as though mod_proxy_connect takes over the whole connection instead of continuing to pipe through mod_ssl, confusing the heck out of the HTTPS client. Is there a way to get this to work? I don't want to do this over plain HTTP, for several reasons: Leaving a big fat open proxy like that just stinks A big fat open proxy is not good over HTTPS either, but with authentication required it feels fine to me HTTP goes through a proxy -- I'm not too concerned about my traffic being sniffed, as it's ssh that'll be going "plaintext" through the tunnel -- but it's a lot more likely to be mangled than HTTPS, which fundamentally cannot be proxied Requirements: Must work over port 443, without disturbing other HTTPS traffic (i.e. I can't just put the ssh server on port 443, because I would no longer be able to serve pages over HTTPS) I have or can write a simple port forwarder client that runs under Windows (or Cygwin) Edit DAG: Tunnelling SSH over HTTP(S) has been pointed out to me, but it doesn't help: at the end of the article, they mention Bug 29744 - CONNECT does not work over existing SSL connection preventing tunnelling over HTTPS, exactly the problem I was running into. At this point, I am probably looking at some CGI script, but I don't want to list that as a requirement if there's better solutions available.

    Read the article

  • Android calculator with button click

    - by rynwtts
    I am trying to calculate a field named lblAnswer by adding values txtA + txtB. I am fairly new to the android development world and would like to know what is the best way of going about this. I have already added the necessarily edit fields to the GUI. I am now working in the java file to try and create the method. This method has been named doCalc. Here is what I have thus far. public void doCalc() { lblAnswer = txtA + txtB; } It has been suggested that I add more code here is the full code. Thank you for that suggestion. Here is the Java File. package com.example.wattsprofessional; import android.app.Activity; import android.os.Bundle; import android.view.Menu; public class MainActivity extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); } @Override public boolean onCreateOptionsMenu(Menu menu) { // Inflate the menu; this adds items to the action bar if it is present. getMenuInflater().inflate(R.menu.activity_main, menu); return true; } public void doCalc() { lblAnswer = txtA + txtB; Double.parseDouble(txtA.getText().toString()); lblAnswer.setText"t } and here is the xml file. <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" tools:context=".MainActivity" > <EditText android:id="@+id/txtA" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentTop="true" android:layout_centerHorizontal="true" android:layout_marginTop="40dp" android:ems="10" android:hint="Write Here" android:inputType="numberDecimal" > <requestFocus /> </EditText> <EditText android:id="@+id/txtB" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignLeft="@+id/txtA" android:layout_below="@+id/txtA" android:layout_marginTop="32dp" android:ems="10" android:hint="Second Here" android:inputType="numberDecimal" /> <Button android:id="@+id/button1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerHorizontal="true" android:layout_centerVertical="true" android:text="@string/calculate" android:onClick="doCalc"/> <TextView android:id="@+id/lblAnswer" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_below="@+id/button1" android:layout_centerHorizontal="true" android:layout_marginTop="50dp" android:text="TextView" /> </RelativeLayout>

    Read the article

  • [solved] PHP-called hyperlink stopped showing when CSS table implemented

    - by Luke
    EDIT: Solved - was not flutter's tag stripping, should work as advertised. I'm using Flutter (which creates custom fields) in Wordpress to display profile information entered as a Post. Before I implemented the CSS tables the link showed up and was clickable. Now I get nothing returned, even when I try to call the link outside the table. If you know anything about this, here's my code in the index.php file and I remain available for any questions. <?php if (in_category('Profile')) { ?> <table id="mytable" cellspacing="0"> -snip- <tr> <th class="row1" valign="top">Website </td> <td>Link: <a href="<?php echo get_post_meta($post->ID, 'FrWebsite', $single=true) ?>"> <?php echo get_post_meta($post->ID, 'FrWebsite', $single=true) ?></a></td> </tr> -snip- </table> Thanks, L Edit: @Josh - there is a foreach looping construct in the table and it is reading and displaying the code correctly, I see what you're getting at now: <tr> <th class="row2" valign="top">Specialities </td> <td class="alt" valign="top"><?php $my_array = get('Expertise'); $output = ""; foreach($my_array as $check) { $output .= "<span>$check</span><br/> "; } echo $output; ?></td> </tr> Edit - @Josh - here's the old code as far as I can remember it, there was no major difference just a <td> tag where there now stands a <th>, there wasn't the class="" and there was no "Link:" and FrWebsite was called Website, but it still didn't work when called Website so I changed to see if that was the error. <tr> <td width="200" valign="top">Website </td> <td><a href="<?php echo get_post_meta($post->ID, 'Website', $single=true) ?>"><?php echo get_post_meta($post->ID, 'Website', $single=true) ?></a></td> </tr>

    Read the article

< Previous Page | 593 594 595 596 597 598 599 600 601 602 603 604  | Next Page >